Wireless charger list. - Nexus 6 Accessories

Alllllright folks I am looking for a wireless charger.. And would like some of you guys to help me out... Give me some suggestions and reasons why its your go to wireless charger.. Looking for a nice one but not too expensive. Annnnnd GO.

shayneflashindaily said:
Alllllright folks I am looking for a wireless charger.. And would like some of you guys to help me out...
Click to expand...
Click to collapse
I am using cheap QI-pads from eBay. They all work with N6 and a standard feed charger with a capacity of at least 1A at 5 volt.
Because the back of the N6 is not flat you need a rectangular QI-pad.
For pratical use place a marker on the QI-pads to remember the right position.

I've been using this Itian with 3 coils from Amazon for a couple of weeks now. It works great so far.
It's at a nice angle, allowing me to see the screen while it charges & the 3 coils allow me to just drop it on the pad, without having to adjust trying to find the right spot before it starts to charge.

That Itian is what I'm looking for .. I'd like to find a stand up with LED.. But that one is nice..and cheap ? I live in the US so wonder how long it would take to get here ,looks like its in the UK

shayneflashindaily said:
That Itian is what I'm looking for .. I'd like to find a stand up with LED.. But that one is nice..and cheap I live in the US so wonder how long it would take to get here ,looks like its in the UK
Click to expand...
Click to collapse
You can find it on the US Amazon store too.
And it also has a led at the bottom. It's red when the phone isn't on or when it's fully charged and blue when it's still charging.

Nice ! Thanks I'll check that out fosho!

I've been looking for a charger as well, might have to give this one a shot. Its way cheaper than the TYLT chargers

I'm using the Itian as well -- working great so far. It's a lot bigger than I thought it'd be, which is good for the big Nexus 6.
Sent from my Nexus 6 using Tapatalk

I've been using the Itian since January.; I have two of them, in fact.
They have been rock solid and trouble free the whole time.

choetech stadium charger

Related

Which Qi wireless charger is everyone using?

Just wanted to see what everyone was using. I purchased the TYLT Vu. It's a little expensive bit I wanted one that could charge while being on landscape.
I've got three of those in one of the newer cheaper versions of that call the a6 then another company makes. You'll find it on Amazon. Both of them work perfectly with the g3 in landscape and portrait.
I am using a Nokia "Fatboy" QI charger and it is working great!
RED ZMAN said:
I've got three of those in one of the newer cheaper versions of that call the a6 then another company makes. You'll find it on Amazon. Both of them work perfectly with the g3 in landscape and portrait.
Click to expand...
Click to collapse
Was it this one? A6
I thought the Verizon model had wireless charging built in. But I tried my g3 on his qi charger and it didn't work. Any suggestions?
3 coils CHOETECH Stadium Qi
using this, its pretty good and the phone doesn't get hot at all:
http://www.amazon.com/gp/product/B00JA7HNZO/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
robwege said:
I thought the Verizon model had wireless charging built in. But I tried my g3 on his qi charger and it didn't work. Any suggestions?
Click to expand...
Click to collapse
Yup, there's a bunch of threads on it in here. One was posted by me, go to ebay and find user Cellphone-Parts, buy a wireless charging back. Works perfectly
GTiceman said:
Was it this one? A6
Click to expand...
Click to collapse
Yup, that's it! Works great landscape or portrait.
RED ZMAN said:
Yup, there's a bunch of threads on it in here. One was posted by me, go to ebay and find user Cellphone-Parts, buy a wireless charging back. Works perfectly
Yup, that's it! Works great landscape or portrait.
Click to expand...
Click to collapse
the ones i see on ebay are this one. is that the one you are talking about?
http://www.ebay.com/itm/LG-G3-F400-...t=US_Cell_Phone_PDA_Cases&hash=item43ccc9e0ad
No. We don't have a F400.
The links are in the thread I mentioned, only 2 threads down from this one in the list.
The title should help you out...
"QI/NFC Verizon LG G3 Battery Covers $22.94 shipped already!"
This is the one I ordered:
http://www.amazon.com/gp/product/B00F6SPZWO/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Of course, I haven't received it yet and haven't ordered a back yet, so don't expect a review anytime soon.
Has anyone tried a cheap one from ebay such as found here: http://www.ebay.com/itm/Qi-Wireless...S_Cell_Phone_PDA_Chargers&hash=item19f0d9b344 ... I think I might give it a try unless someone has experience and highly advises against it?!
taihard said:
Has anyone tried a cheap one from ebay such as found here: http://www.ebay.com/itm/Qi-Wireless...S_Cell_Phone_PDA_Chargers&hash=item19f0d9b344 ... I think I might give it a try unless someone has experience and highly advises against it?!
Click to expand...
Click to collapse
Let us know. Looks like same specs as many others.
taihard said:
Has anyone tried a cheap one from ebay such as found here: http://www.ebay.com/itm/Qi-Wireless...S_Cell_Phone_PDA_Chargers&hash=item19f0d9b344 ... I think I might give it a try unless someone has experience and highly advises against it?!
Click to expand...
Click to collapse
Typically, they're all the same. With the one you posted, its all plastic shell which gives more real estate for the phone to rest on. Inside is just a coil and PCB board. I think there is a YouTube video of someone opening one of these up.
I opted for a smaller profile (I purchased similar for $1 more). I'll be ordering from this one soon - http://www.ebay.com/itm/Qi-Wireless...l_Phone_PDA_Chargers&var=&hash=item2ed4c6f705. And it ships from the US. No long wait time.
But the one you linked to is a great price.
iazybandit said:
Typically, they're all the same. With the one you posted, its all plastic shell which gives more real estate for the phone to rest on. Inside is just a coil and PCB board. I think there is a YouTube video of someone opening one of these up.
I opted for a smaller profile (I purchased similar for $1 more). I'll be ordering from this one soon - http://www.ebay.com/itm/Qi-Wireless...l_Phone_PDA_Chargers&var=&hash=item2ed4c6f705. And it ships from the US. No long wait time.
But the one you linked to is a great price.
Click to expand...
Click to collapse
I was looking at those "hockey puck" ones and I like how it would take up less desk space... Found one here: http://www.ebay.com/itm/UL-Qi-Stand...S_Cell_Phone_PDA_Chargers&hash=item19f0d9b650 ... but I like how the other one seems thinner and I think I would have less of a chance knocking it off than if it was balancing on that puck... I'm not too worried about time since I just ordered one of these qi stickers: http://www.aliexpress.com/snapshot/6173009396.html today and will probably have to wait half a month any ways haha
taihard said:
I was looking at those "hockey puck" ones and I like how it would take up less desk space... Found one here: http://www.ebay.com/itm/UL-Qi-Stand...S_Cell_Phone_PDA_Chargers&hash=item19f0d9b650 ... but I like how the other one seems thinner and I think I would have less of a chance knocking it off than if it was balancing on that puck... I'm not too worried about time since I just ordered one of these qi stickers: http://www.aliexpress.com/snapshot/6173009396.html today and will probably have to wait half a month any ways haha
Click to expand...
Click to collapse
Good point. I just received my "hockey puck". Just in time for me to test out the Qi stickers.
Could of gotten in on my group buy for the stickers. I ordered 100 and should have it next week. Sold out of all of them in a day and they should be mailed out to everyone late next week.
Seems there is still demand for them so I'm about to place another order for 100. BTW, I've been in constant contact with the manufacturer..they've been sold out so it will take some time. But since I'm ordering so much, they'll be able to accommodate my order quicker.
Yeah I saw I missed out, that's ok, I can wait. It didn't say when I was ordering that they were sold out.
Sent from my VS985 4G using XDA Free mobile app
taihard said:
Yeah I saw I missed out, that's ok, I can wait. It didn't say when I was ordering that they were sold out.
Sent from my VS985 4G using XDA Free mobile app
Click to expand...
Click to collapse
Yea, it doesn't say when you order. One thing I don't like is that it takes 1 day to process payment verification, 5 days to process order and another 15-26 days to ship. Luckily with this group buy, no one has to wait that long.
But if you do get that Qi charger, definitely let us know. Great price but to me, its just too big.
iazybandit said:
Yea, it doesn't say when you order. One thing I don't like is that it takes 1 day to process payment verification, 5 days to process order and another 15-26 days to ship. Luckily with this group buy, no one has to wait that long.
But if you do get that Qi charger, definitely let us know. Great price but to me, its just too big.
Click to expand...
Click to collapse
I ended up ordering that first one I linked to so I'll report back once I get everything (lol ETA between Aug 15 - Sept 28).
I use the TYLT Vu at work and a Nokia DT-900 at the house... Both work very well
New, stronger, more expensive Qi chargers are coming out this fall: http://www.androidauthority.com/qi-wireless-v1-2-improves-412408/

Qi Sticker

I ordered the Qi sticker from Ali Express and it has been working great. These are the same ones that others are selling on here and eBay. Here's the link if you want to get it yourself and save a few bucks.
http://www.aliexpress.com/item/Fact...G-G3-CASE-D885-D830-D851-D850/1971193812.html
What kind of charging rate are you seeing with this?
i have 3 of the stickers let if any one was looking for on and did not wanna wait 3 weeks for it to come in
Which chargers are you all using?
I have tried 4 so far and only the Nokia DT-900 works for me.
I tried an Incipio Ghost 100, PowerBot PB1020, and Anker Slim as well, but all kept reporting to put the phone in the hot zone and wouldnt charge it.
I've heard good things about TYLT, but can't see spending 50+ for a charger.
Thanks.
antgore06 said:
i have 3 of the stickers let if any one was looking for on and did not wanna wait 3 weeks for it to come in
Click to expand...
Click to collapse
Do you still have any of these left?
How long did it take you to get it?
About 2 weeks. Not bad coming from China.
antgore06 said:
i have 3 of the stickers let if any one was looking for on and did not wanna wait 3 weeks for it to come in
Click to expand...
Click to collapse
Any left bruh?
Yeah.
I like using a case on my phone. Does this card add any bulk? I purchased one for GS5 and wasn't happy with bulge it created.
I bought the sticker from ebay, installed but i really dont like how it work, i have to put the phone in the sweet spot to work ( probably could be the charger) but my nexus 5 charge from any angle.
2fastkuztoms said:
I bought the sticker from ebay, installed but i really dont like how it work, i have to put the phone in the sweet spot to work ( probably could be the charger) but my nexus 5 charge from any angle.
Click to expand...
Click to collapse
Use a different Qi charging pad. The LG G3 is picky when it comes to charging pads.
I'm using this Qi sticker: http://www.ebay.com/itm/201154470247?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Only a buck more than the 1 from China, and it gets to you a lot faster. It's working fine, and is no thicker than the stock NFC sticker (which you need to pull / scrape out of the back before you install this one) so it adds no bulk.
I'm using it with these charging pucks:
http://www.amazon.com/gp/product/B00F6SPZWO/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
http://www.amazon.com/gp/product/B00ESUC36M/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
They work fine. Positioning is a little bit sensitive, but it only took me a few tries to figure out the sweet spot.
I ordered 3 QI sticker and have 2 extras if any one wants one
rollinrich said:
I ordered 3 QI sticker and have 2 extras if any one wants one
Click to expand...
Click to collapse
If this is still a valid offer just lmk what you'd need from me. Thanks in advance for any consideration.
ASHinStL said:
If this is still a valid offer just lmk what you'd need from me. Thanks in advance for any consideration.
Click to expand...
Click to collapse
PM your info and I'll ship it out to you
rollinrich said:
I ordered 3 QI sticker and have 2 extras if any one wants one
Click to expand...
Click to collapse
Is this still on the table?
@ piperj All gone ASHinStL got the last one
Ordered this one off eBay and couldn't get it to work for anything, NFC is very weak compared to the stock cover. Asked for a replacement and installed it, same thing. Using this puck that I got with my S5 , maybe I'll try a known working pad, I got a feeling this one is very cheap.
rollinrich said:
I ordered 3 QI sticker and have 2 extras if any one wants one
Click to expand...
Click to collapse
do you still have an extra one?

Qi Charging Pads

So, I finally received my sticker, and now I can wireless charge (yay), but my only Qi Charging Pad is the flat crappy Ebay one.
I'd like to get something similar to the Tylt Vu, at a reasonable price. Anyone have experience with:
http://www.ebay.com/itm/QI-Wireless...S_Cell_Phone_PDA_Chargers&hash=item4adb780ae4
or
http://www.ebay.com/itm/NEW-LG-WCD-...S_Cell_Phone_PDA_Chargers&hash=item339185d666
I'm new to the wireless charging game, and I'm not sure how the compatibility works.
Thanks ahead of time for helping!
gorillaz1 said:
So, I finally received my sticker, and now I can wireless charge (yay), but my only Qi Charging Pad is the flat crappy Ebay one.
I'd like to get something similar to the Tylt Vu, at a reasonable price. Anyone have experience with:
http://www.ebay.com/itm/QI-Wireless...S_Cell_Phone_PDA_Chargers&hash=item4adb780ae4
or
http://www.ebay.com/itm/NEW-LG-WCD-...S_Cell_Phone_PDA_Chargers&hash=item339185d666
I'm new to the wireless charging game, and I'm not sure how the compatibility works.
Thanks ahead of time for helping!
Click to expand...
Click to collapse
If you take a look at the multiple G3 forums, both are fine and highly recommended.
http://forum.xda-developers.com/lg-g3/accessories
http://forum.xda-developers.com/verizon-lg-g3/accessories
http://forum.xda-developers.com/tmobile-lg-g3/accessories
Sorry I still get a bit leary looking at other versions of phones. The US Carriers have done an amazing job of ****ing up any trust I have of intercompatibility.
Still trying to find that second one in one of the posts and having luck.
gorillaz1 said:
Sorry I still get a bit leary looking at other versions of phones. The US Carriers have done an amazing job of ****ing up any trust I have of intercompatibility.
Still trying to find that second one in one of the posts and having luck.
Click to expand...
Click to collapse
I totally agree with you.
I have the Nokia DT-900 and it works great on my Sprint G3, but have been unsuccessful thus far at finding any others that work as well.
I have a CHOE UPGRADED Qi Wireless Charger Charging Pad coming today. A colleague at work has it, and the phone tends to charge more often than not (if you get it in the sweet spot (hot zone)).
Good thing I have an Amazon prime account and return shipping is free! I've been doing quite a bit of buying and returning lately.
joepoid said:
I totally agree with you.
I have the Nokia DT-900 and it works great on my Sprint G3, but have been unsuccessful thus far at finding any others that work as well.
I have a CHOE UPGRADED Qi Wireless Charger Charging Pad coming today. A colleague at work has it, and the phone tends to charge more often than not (if you get it in the sweet spot (hot zone)).
Good thing I have an Amazon prime account and return shipping is free! I've been doing quite a bit of buying and returning lately.
Click to expand...
Click to collapse
Yeah Prime is the best.
It seems the Tylt works well, but damn it...I don't want to spend upwards of $70 on a charger that could be outdated in a year or two.
gorillaz1 said:
Yeah Prime is the best.
It seems the Tylt works well, but damn it...I don't want to spend upwards of $70 on a charger that could be outdated in a year or two.
Click to expand...
Click to collapse
Again, I totally agree.
I am trying to stay in the 25-30 range.
I will let you know how the CHOE pad works out, but also as I said, the Nokia DT-900 works great and can be found for around $20 online.
gorillaz1 said:
Yeah Prime is the best.
It seems the Tylt works well, but damn it...I don't want to spend upwards of $70 on a charger that could be outdated in a year or two.
Click to expand...
Click to collapse
joepoid said:
Again, I totally agree.
I am trying to stay in the 25-30 range.
I will let you know how the CHOE pad works out, but also as I said, the Nokia DT-900 works great and can be found for around $20 online.
Click to expand...
Click to collapse
Itian A6. It's a TYLT Vu clone and works. If you take the time to browse the forums or search, you'll see
http://forum.xda-developers.com/search.php?searchid=302985969
I went to http://forum.xda-developers.com/lg-g3/accessories/feeler-buy-qi-nfc-sticker-t2827738 and did a search for "itian a6"
Chargers using the new Qi spec should be coming later this year, so I think spending a lot of money now on something very soon to be outdated is not a good idea. I'm sticking with the $10-$15 ones that can be found on eBay. As long as they output 1000mA they're good enough for now.
http://www.engadget.com/2014/07/31/qi-wireless-resonance-charging/
The CHOE updated charger pad works very well with the Sprint LG G3.
dkratter14 said:
Chargers using the new Qi spec should be coming later this year, so I think spending a lot of money now on something very soon to be outdated is not a good idea. I'm sticking with the $10-$15 ones that can be found on eBay. As long as they output 1000mA they're good enough for now.
http://www.engadget.com/2014/07/31/qi-wireless-resonance-charging/
Click to expand...
Click to collapse
Now that is some helpful information, thank you. Backwards compatible is the hotness.
FWIW The CHOE charger has worked really well for both my N5 and G3.

Wireless Chrager

Does anyone know if the old Google Wireless charger seen here http://www.amazon.com/Google-Wirele...4183&sr=8-3&keywords=nexus+6+wireless+charger will work with the Nexus 6?
Yes, it does. It doesn't "stick" as good as the N4 and N5 (I believe primarily because of the curved back), but it is usable.
You're much better off with a larger charging bed though, like the original Samsung charger. Or, better yet (especially if you're wanting a "stand-up" type of charger), the Nokia DT-910 works perfectly. Regardless, just remember that the sweet spot (which is the area you center on your charger) is unusually low on the N6. You want the center of your charger to be centered horizontally on the N6, but vertically, be just below the bottom of the volume rocker.
I have the Orb and it works fine. The other person was correct when he said it doesn't stick in place as well. You have to be slightly careful how you place it or it might slide down so that the phone is resting on the table but once it is on it stays in place.
I have read the Tylt charger works well.(http://www.amazon.com/TYLT-Wireless-Charger-all-Phones/dp/B00DG8NUC8) I am considering getting one even though they are really expensive so I can simply plop my phone down without having to think about it at all and know it will work fine and not fall off.
I do have the flat nokia dt-900 and it works well and isn't fussy about placement. With the amoled screen I want it tilted to use as a clock at night.
The Nokia DT-910 looks OK. Its about $35
falcon26 said:
The Nokia DT-910 looks OK. Its about $35
Click to expand...
Click to collapse
I can vouch for that charger. Worked great on my N5, works perfect on my N6. It's such a great charger that when I bought my N6, and gave my wife my N5, I had to order another DT-910, because no way in hell she was getting mine.
OK I'm about to order the Nokia 910. And again it does work great with the Nexus 6 correct? Also what color is the LED on the stand when charging? Amazon has it for $49
Thanks!
falcon26 said:
OK I'm about to order the Nokia 910. And again it does work great with the Nexus 6 correct? Also what color is the LED on the stand when charging? Amazon has it for $49
Thanks!
Click to expand...
Click to collapse
Yes, it works perfectly with the N6. The LED on the bottom is white. It's very noticeable, but isn't "light up the room" bright like a lot of chargers.
OK ordered it from Amazon. Get it Tuesday same day as I get my Nexus 6
Duh I totally forgot to ask. Will this charger work the the Nexus 6 if its in a case?
falcon26 said:
Duh I totally forgot to ask. Will this charger work the the Nexus 6 if its in a case?
Click to expand...
Click to collapse
As with any qi charger, it will as long as the case isn't metal or crazy thick.
Aw OK perfect. The one I'm getting is super thin...
I just ordered this case. Looks thin enough...
http://www.amazon.com/Nexus-Case-Pr...&qid=1416694717&sr=1-21&keywords=Nexus+6+case
jt3 said:
I can vouch for that charger. Worked great on my N5, works perfect on my N6. It's such a great charger that when I bought my N6, and gave my wife my N5, I had to order another DT-910, because no way in hell she was getting mine.
Click to expand...
Click to collapse
Can I have a picture please
I'm curious about how big does the N6 look while docked. I currently like mine laying down on a pad, but kind of curious of how tall it is when on a dock like that.

Motorola dock + qi charger

So a while back I ordered two moto stands because they were on sale. I hardly use one of them so I decided to modify one.
This is what I came up with because I had been wanting a qi wireless stand. It was a lot easier than I thought.
Took apart one of the stands. Under the pad are just four lil screws, then just clipped off a couple of tabs so that it can lay flat on the back of the qi charger.
I didnt want to use super glue to stick them together, then I remembered I had some adhesive for cell phone screens and that stuff is strong, for being super thin (i think 1/16)
Here are some pics. Works awesome and looks good.
Looks nice. I like it. Props on the creativity.
oh btw i took the pics with my N6 lol
I might try this with mine, I mainly use it for holding my phone when I do work but this is a good idea.
This inspired me. I just bought all of the stuff to do this.
skndeep102 said:
This inspired me. I just bought all of the stuff to do this.
Click to expand...
Click to collapse
haha awesome
With this setup, it only charges while it's standing up. I wanted it to charge both ways standing and laying on the side. But now I like that I can lay it on its side after its done charging, without it continuing to charge.
albert1500 said:
haha awesome
With this setup, it only charges while it's standing up. I wanted it to charge both ways standing and laying on the side. But now I like that I can lay it on its side after its done charging, without it continuing to charge.
Click to expand...
Click to collapse
Yeah I might see if I can't change the position of the charging pad a bit so I can charge it on its side. I'd like to use it as an alarm clock type dock.
links to the parts you used?
skndeep102 said:
Yeah I might see if I can't change the position of the charging pad a bit so I can charge it on its side. I'd like to use it as an alarm clock type dock.
Click to expand...
Click to collapse
It's possible, the charger would just need to be lower. Or if you had one of those rectangular ones that have like 3 coils. I think theres one on amazon that I saw thats the same thickness as this round one.
Jrmiller said:
links to the parts you used?
Click to expand...
Click to collapse
charger
http://www.amazon.com/Anker-Ultra-S...6486&sr=1-5&keywords=qi+wireless+charging+pad
stand
http://www.amazon.com/Motorola-Univ...qid=1420346530&sr=1-1&keywords=motorola+stand
adhesive tape i used - this is not the one i ordered, just similar. I had mine laying around for a couple years or so
http://www.amazon.com/1mm-Digitizer...-2&keywords=mobile+phone+screen+adhesive+tape
albert1500 said:
charger
http://www.amazon.com/Anker-Ultra-S...6486&sr=1-5&keywords=qi+wireless+charging+pad
stand
http://www.amazon.com/Motorola-Univ...qid=1420346530&sr=1-1&keywords=motorola+stand
adhesive tape i used - this is not the one i ordered, just similar. I had mine laying around for a couple years or so
http://www.amazon.com/1mm-Digitizer...-2&keywords=mobile+phone+screen+adhesive+tape
Click to expand...
Click to collapse
thanks. gonna build one or two :highfive:
albert1500 said:
It's possible, the charger would just need to be lower. Or if you had one of those rectangular ones that have like 3 coils. I think theres one on amazon that I saw thats the same thickness as this round one.
Click to expand...
Click to collapse
Could put the charge port at the bottom and run the cord through the back of the stand?
skndeep102 said:
Could put the charge port at the bottom and run the cord through the back of the stand?
Click to expand...
Click to collapse
I dont think it would make a difference with that charger, I tried it that way and it wouldn't charge the phone sideways.
Just got a nexus 6 and i see that this stand is on sale.
Does the charging pad work with the N6 in that position?
I like the subtle plug for FKupdater.
How well does it work with a case? My nexus 4 qi charger works while the other I got for my Sammie doesn't. The nexus charger is just very difficult to find the sweet spot and get it to stay there. I'm currently is using the supcase unicorn beetle heavy duty case, awesome case by the way. Thanks
rewdboy843 said:
How well does it work with a case? My nexus 4 qi charger works while the other I got for my Sammie doesn't. The nexus charger is just very difficult to find the sweet spot and get it to stay there. I'm currently is using the supcase unicorn beetle heavy duty case, awesome case by the way. Thanks
Click to expand...
Click to collapse
If you make this set up it works great. I've got the ringke max case on mine and it works fine.
Awesome. Buying materials right meow! Thanks
rewdboy843 said:
Awesome. Buying materials right meow! Thanks
Click to expand...
Click to collapse
Buy the dock on motorola.com, its on sale for $9.99 right now
http://www.motorola.com/us/accessory-family-page-1/Flip-Stand/m-Flip-Stand.html
vavaud said:
Just got a nexus 6 and i see that this stand is on sale.
Does the charging pad work with the N6 in that position?
Click to expand...
Click to collapse
with this setup, it will only charge in the portrait position and yes works perfect with the N6

Categories

Resources