For what ever reason ever since I went from 4.4.4 to 5.1.1 (TW) on my Note 4 i have not been able to cut wake lock paths. To be more clear I did not upgrade to 5.1.1 it was a clean flash.The option is no longer there, it no longer even displays the path when an app automatically awakens from hibernation. I'm running the latest beta version of greenify with the donation/zoomed features enabled. Can anyone help?
XBlackChaosX said:
For what ever reason ever since I went from 4.4.4 to 5.1.1 (TW) on my Note 4 i have not been able to cut wake lock paths. To be more clear I did not upgrade to 5.1.1 it was a clean flash.The option is no longer there, it no longer even displays the path when an app automatically awakens from hibernation. I'm running the latest beta version of greenify with the donation/zoomed features enabled. Can anyone help?
Click to expand...
Click to collapse
It works for me even on M.
Is Greenify enabled in Device Administrators?
Are you rooted? If not, have you enabled Greenify in Accessibility?
Are you using Supersu latest version?
tnsmani said:
It works for me even on M.
Is Greenify enabled in Device Administrators?
Are you rooted? If not, have you enabled Greenify in Accessibility?
Are you using Supersu latest version?
Click to expand...
Click to collapse
Yes to all 3. This is so weird. I would like to cut a few paths but I can't even see any wake paths let alone cut any.
I'm having the same Problem. For example i start Instagram, Facebook starts, too, but i can't cut off the wakeup pathes. I'm on Resurrection Remix (CM12.1 - Android 5.1.1) Rom on Galaxy S3 GT-i9300 with Xposed.
I flashed this Rom clean today. Before it was working fine! Greenify Version is 2.6.2 (i don't understand the function of 2.7...)
Any idea?
Some ROM may disable the logcat module of Android by default, please check your ROM configuration tool (if any) to enable logcat.
Any idea where i could find it?
Ok, got it: I had to activate "Android Logging" in Boeffla Config App!
Related
Features
Bypasses Exchange Security requirements such as the PIN lock requirement in AOSPish ROMs.
Verified working in
Nexus 5/4.4 stock
Working on latest CM11 nightlies
Requirements
Latest Xposed installed
Android 4.4
Root
Install Instructions
Ensure you have deleted your corporate accounts before continuing. This will not fix an already installed device admin.
Download and Install "Xposed Installer"
Open the Xposed Installer, tap Framework, tap Install/Update - a lot of people are missing this step.
Reboot device
Install ExchangeBypass-x.x.apk
Enable module in Xposed
Reboot again
Add account in mail
May say security is required but should not come up and ask to create device administrator.
Success!
Change Log
2013-12-10 - 1.5.5.5 - Works with older versions now too. - 9a70f1c2b8220d24169215f07fb3512e
2013-12-03 - 1.4 - Updated for KitKat - 4d3d1b43d5a1504815c73ce74309ed8d
2013-09-13 - 1.1 - Set API to 16 instead of previous 18 - 2f9881197c461682fa6e1569f3e3f320
2013-09-13 - 1.0 - Initial Version
Notes
I have no clue if this will work in your ROM, I wrote it just for me since at the time there was no Xposed mod for Exchange security bypass. If it doesn't work, let me know and I can see if I can update the module for your situation. It might be a simple update. If it works, let me know so I can update the OP with what it is confirmed working with.
May not work with anything below KitKat because of application naming. I don't have access to anything less than 4.4 anymore.
Other ROM requests - It's hard for me to get to these. If you have something you really want, I need to get access to the ROM image so I can pull out the email application and any libraries associated with it. Send me a message here or email me.
prng said:
Features
Bypasses Exchange Security requirements such as the PIN lock requirement in AOSPish ROMs.
Verified working in
CM 10.2
Requirements
Xposed installed
Android 4.1+
Root
Install Instructions
Ensure you have deleted your corporate accounts before continuing for best results.
Install Xposed and reboot once
Install ExchangeBypass-1.0.apk
Enable module in Xposed
Reboot
Add account in mail
May say security is required but should not come up and ask to create device administrator.
Success!
Change Log
2013-09-13 - 1.0 - Initial Version
Notes
I have no clue if this will work in your ROM, I wrote it just for me since at the time there was no Xposed mod for Exchange security bypass. If it doesn't work, let me know and I can see if I can update the module for your situation. It might be a simple update. If it works, let me know so I can update the OP with what it is confirmed working with.
Click to expand...
Click to collapse
After I extract the zip and try to run the APK, I get an error that it is an invalid apk file. Bad upload?
Device: Rooted GS3 i747, dandroid rom, rooted, xposed installed and working.
kwiksi1ver said:
After I extract the zip and try to run the APK, I get an error that it is an invalid apk file. Bad upload?
Device: Rooted GS3 i747, dandroid rom, rooted, xposed installed and working.
Click to expand...
Click to collapse
Try the new file. Here's the MD5: 80a0bb935319ebed1ab65fbf3a074e67
Which version of Android is it, 4.3, 4.2?
prng said:
Try the new file. Here's the MD5: 80a0bb935319ebed1ab65fbf3a074e67
Which version of Android is it, 4.3, 4.2?
Click to expand...
Click to collapse
Android 4.1.2
The error that pops up is "There was an error parsing this package" when I select the APK and try to install it.
I have tried unzipping the file using OSX's native archive utility and root explorer on my phone. Both times the APK give the same error.
Zip file MD5: 80a0bb935319ebed1ab65fbf3a074e67
The APK has the SDK set too high for 4.1, doh! I'll recompile and upload a new version.
kwiksi1ver said:
Android 4.1.2
The error that pops up is "There was an error parsing this package" when I select the APK and try to install it.
I have tried unzipping the file using OSX's native archive utility and root explorer on my phone. Both times the APK give the same error.
Zip file MD5: 80a0bb935319ebed1ab65fbf3a074e67
Click to expand...
Click to collapse
Please try with the new version. It should work now.
prng said:
Please try with the new version. It should work now.
Click to expand...
Click to collapse
Worked like a dream. Thanks again!
I'm on the Nexus 4 (bonestock 4.3...rooted ofc) but I get prompted for setting a lock screen password.
Is there any other info that I could provide to help you out?
sent from my mini tractor.
aeoveu said:
I'm on the Nexus 4 (bonestock 4.3...rooted ofc) but I get prompted for setting a lock screen password.
Is there any other info that I could provide to help you out?
sent from my mini tractor.
Click to expand...
Click to collapse
I would try removing the account and recreating. Based on how this works it disables the checks when the account is used and added to prevent the device administrator profile. If you disable the device administrator if might delete the account so you could try that first.
Try that and let me know. If that doesn't work see if you can get the application name like com.android.email.
Removing device admin usually removes the exchange account... I'll try your method (and a variation of it) tomorrow, but meanwhile, perhaps the file name is different in my phone - maybe that's why?
See screenshot.
sent from my mini tractor.
aeoveu said:
Removing device admin usually removes the exchange account... I'll try your method (and a variation of it) tomorrow, but meanwhile, perhaps the file name is different in my phone - maybe that's why?
See screenshot.
sent from my mini tractor.
Click to expand...
Click to collapse
Yep usually it does that's why I suggested deleting and recreating it.
It have a different identifier. Check under apps and look for the app identifier. It might say com.android.email. I key off of that so that could cause it not to work.
OK. For the love of life, I can't seem to find the identifier for the email app. For the exchange add on, its com.Google.android.exchange
Removing email from device admin got rid of the account. Refuses to work otherwise :/
Maybe the target shouldn't be the email app, but the exchange app? Or maybe I'm using bone stock 4.3 and that could be the reason? (I'm not a dev, nor anywhere near it - but I do consider myself a computer freak and a whiz!) I don't want to flash so I'm hoping I could get your mod to work.
sent from my mini tractor.
Not working though. After following the instructions my mail app still forces me to restrict my phone with a hard unlock code. Nexus 4, latest CyanogenMod
jjeroen said:
Not working though. After following the instructions my mail app still forces me to restrict my phone with a hard unlock code. Nexus 4, latest CyanogenMod
Click to expand...
Click to collapse
What version of Xposed are you using? Can you verify that Xposed is loaded? Every time you update your ROM you will need to reinstall Xposed or add in the file into the /etc/addon.d/ directory to backup the Xposed modified version of /system/bin/app_process.
prng said:
What version of Xposed are you using? Can you verify that Xposed is loaded? Every time you update your ROM you will need to reinstall Xposed or add in the file into the /etc/addon.d/ directory to backup the Xposed modified version of /system/bin/app_process.
Click to expand...
Click to collapse
It actually works now! I was unformiliar with exposed, but I had to open it after the install. Maybe something to add to the instructions . After that it works fine
Sorry for interrupting, but help? Lol
Were you able to fiddle with mod by any chance?
sent from my mini tractor.
Did not work on Galaxy Nexus (toroplus) running stock 4.2.1.
I'm getting an error
This server requires secuirty features that your android device does not support including: my mail server name.
I have a droid RAZR with 4.3 pacman and jbx kernel.
OG RAZR XT912, PAC•man
aeoveu said:
Sorry for interrupting, but help? Lol
Were you able to fiddle with mod by any chance?
sent from my mini tractor.
Click to expand...
Click to collapse
I would verify that Xposed is installed and then go into the Xposed Installer and make sure it's installed as well. There are two parts to the Xposed installer.
After you've verified, then make sure the mod is installed and checked, then reboot, then add the account.
Here's what I tried: installed xposed. Reboot. Verified xposed is working (cause the other modules - gravitybox - is working). Enabled your mod. Reboot. Added exchange account. And nope!
Could it be something with deodex/odexed ROMs?
sent from my mini tractor.
CyanogenMod Rom for Samsung Galaxy Tab Pro 12.2, SM-T900 (v2wifixx)
NEW VERSION CyanogenMod 12.1, "Lollipop" version 5.1.1
CM 12.1 compiled for the SM-T900 from source code
These are unofficial releases of CyanogenMod for the Samsung Tab Pro 12.2 SM-T900 (v2wifixx). CyanogenMod is an aftermarket firmware for phones and tablets based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors. These ROM's are compiled from CM sources, and based on CM ports by crpalmer for the Tab Pro 10.1 (SM-T520), he deserves the credit, this would not be possible without his work. I also want to thank Valera1978 for his work on our sister tablet, the SM-P900.
WARNING: This is released without warranty of any kind. Use of this software could damage or destroy your tablet. Use at your own risk.
How to install:
1. Root device
2. Download Rom and Gapps
3. Install custom recovery, recommend TWRP Tab Pro 12.2 (v2wifixx), can be flashed with Odin or from existing recovery.
You may also use Clockwork Recovery, a custom recovery img file can be installed using dd and Terminal Emulator. First download to /sdcard, and install to /dev/block/mmcblk0p10.
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
4. Backup stock with custom recovery.
5. Flash Rom and Gapps.
6. Enjoy
Downloads
CyanogenMod 12.1 "cm-12.1-20150808-UNOFFICIAL-v2wifixx.zip"
https://www.androidfilehost.com/?fid=24052804347790353
CyanogenMod 12.1 "cm-12.1-20150730-UNOFFICIAL-v2wifixx.zip"
https://www.androidfilehost.com/?fid=24052804347783830
Gapps for CyanogenMod 12.1 Lollipop 5.1.1
https://www.androidfilehost.com/?fid=24052804347783826
Source files for CyanogenMod for the Samsung Tab Pro 12.2 SM-T900 (v2wifixx) on Github
Building CyanogenMod 12.1 for the SM-T900 from source is not too difficult. You do need basic computer knowledge especially with linux. CyanogenMod has wikis on how to compile for different devices. If you setup for picassowifi, just add the local manifest under .repo, then
Code:
repo sync
and the kernel, vendor and device files will automatically download from Github. Then
Code:
source build/envsetup.sh
and
Code:
brunch v2wifixx
Good luck and have fun.
Local Manifest
https://github.com/Pentahex/android_repo_local_manifests_v2wifixx
Device source:
https://github.com/Pentahex/android_device_samsung_v2wifixx.git
Vendor source:
https://github.com/Pentahex/android_vendor_samsung_v2wifixx.git
Kernel source:
https://github.com/Pentahex/android_kernel_samsung_v2wifixx.git
Again, source files are a fork from crpalmer and Valera1978, many thanks for their efforts.
Awesome and thank you for your contribution.
Sent from my A0001 using Tapatalk
Thank you chhaggerty. This CM11 built directly from the cyanogen source code is very smooth and reactive. It's runs better than the predecessors, as it is created directly from cm11 source code and adapted to the SM-T900 instead of being a direct port from another device. I have fortunate to run this version in beta for 5 or 6 days now and I have not seen any issues in this release, but from the screen rotation that only seem to react if the app has a default setting. You can use the Set Orientation, or the Ultimate Rotation Control app to pick the rotation you desire.
This list of functions, based on weaknesses in other builds and ports for the Tab/Note family, have been tested without any issues:
- mtp - to activate go to Settings/About tablet/ and tap 8 times on Build number - The menu will now have Settings/{ } Developer options/ activated. Check mark USB debugging notify.
- adb
- External SD - I used JRummy's SD KitKat Fixer to allow my apps to write to the removable card (common w. all cm ROM's)
- USB OTG including USB storage
- Off-mode charging
-----------------------------------------
- Lid sensor is working, and no SOD's has been observed
- IR blaster is working, i've used IR2.0
- OC settings - located in Settings/Performance/
- Advanced reboot - to activate go to Settings/About tablet/ and tap 8 times on Build number - The menu will now have Settings/{ } Developer options/ activated. Check mark Advanced reboot.
-----------------------------------------
- Play Store
- Google Play movies download and playback
- Google Play streaming Movies & TV
- DRM - tested with Audible, Google Books and Amazon Kindle
-----------------------------------------
- Zona
- Popcorn Time - need upgrade to latest version 2.3 beta, includes built-in VPN and Chromecast support with subtitles, earlier version timed out
- YouTube 720p playback - 1020p possible with small hack, 1440p will work w. v5.9.0.12
- Netflix
-----------------------------------------
- Chromecast with #MirrorEnabler hack, allowing for screen cast
- MHL connector
- Miracast
-----------------------------------------
- Capacitive lights - I assume this is the backlights for the capacitive buttons
- Capacitive keys
- Home button - correct function performed
- Brightness manual + auto
- Vibrator
-----------------------------------------
- GPS lock and voice directed navigation
- WiFi both 2.4 GHz & 5 GHz are working
- Bluetooth
- Microphone
- Audio on both speakers
- Headphones
-----------------------------------------
- Camera
- Torch
- Camera Sensors
-----------------------------------------
- Xposed Framework and modules - need re-initialization after each boot (common to all cm ROM's)
- Superuser
- Hangouts Dialer phone calls via Hangouts
-----------------------------------------
The following are standard limitations and options for cm11:
If you need write access to your external SD-card i suggest to d/l JRummy's SD KitKat Fixer and if you need init.d support d/l Uni-init by Ryuinferno. If you think to much heat is building up use Performance/Profile set to Power save, Performance/Processor/CPU governor/ set to ondemand, in addition to increase battery time you can set Wi-Fi/Advanced/Keep Wi-Fi on during sleep/ to Only when plugged in and make sure the Wi-Fi/Advanced/Wi-Fi optimization/ is checked and reduce Display/Sleep/ to below 1 minute. You can also use some apps to improve battery eg Easy Battery Saver, or the more sophisticated AutoCon+ Save Battery & Data and and to put hanging apps to hibernation Greenify that I believe require Xposed Installer. To improve charging time, you can use an app eg Faster Charger. Finally, I have also used PurePerformances in order to further improve the performances and VIPER4AndroidFX to allow for louder speaker sound and enhanced listening experience.
I would love to see someone building an AOSP kernel containing eg fast charge, and OC, cifs etc. as these will never be part of a true cm11 kernel.
bonuzzz has an overclocked kernel with source code for the P-900 TouchWiz, but it runs just as well on the T-900, that could be used as a base for conversion into AOSP, if someone is willing to give it a try.
much better than the stock rom. Thank you.
Hi,
Display mirror over Chromecast first works, now after upgrading some apps (google Play) it stops working.
I can cast via YouTube, but the Chromecast is not listed in Display Mirror.
Any ideas?
kind regards, Nils
Gesendet von meinem SM-T900
hondong said:
Hi,
Display mirror over Chromecast first works, now after upgrading some apps (google Play) it stops working.
I can cast via YouTube, but the Chromecast is not listed in Display Mirror.
Any ideas?
kind regards, Nils
Gesendet von meinem SM-T900
Click to expand...
Click to collapse
In order to get Screen Mirroring over Cromecast to work on the T-900, you will need to apply a hack, #MirrorEnabler, http://forum.xda-developers.com/hardware-hacking/chromecast/experimental-enable-mirroring-device-t2812193, wherein you activate: Mirrorstatus and QuickSettings Mirror. After this you should see the option Cast screen in the dropdown menu in the upper left corner. If it's not there uncheck, and recheck the options in #MirrorEnabler, also #MirrorEnabler require #Superuser allowed, but the question should pop-up when you activate the hack.
5G didn't work on mine any idea??
naomile said:
5G didn't work on mine any idea??
Click to expand...
Click to collapse
Are you talking about 5G Speed Up Internet Browser (no issues), 5G NET Softphone, or what app specifically? Apparently you meant WiFi over the 5GHz band, it should work though.
so much better then the stock rom, thank you!
arcadia2uk said:
Are you talking about 5G Speed Up Internet Browser (no issues), 5G NET Softphone, or what app specifically?
Click to expand...
Click to collapse
I meant 5G wifi but figured out how to get it already. Thanks
Yep, everything has worked so far (include IR). The rotation still does not work but it is not a problem. I can use an app to fix it. Now we just have to wait for cyanogenmod to release cm 12 (android 5.0) and it is perfect. Can't wait for project Volta. It makes my nexus 5 stand by battery lasts so long. Thanks a lot, OP.
I wish they could include multi window on cm althou they said they are not going to.... or custom rom based of cm with multi window would be nice
Quantra said:
I wish they could include multi window on cm althou they said they are not going to.... or custom rom based of cm with multi window would be nice
Click to expand...
Click to collapse
I'm rather happy using xHaloFloatingWindow (see usage instructions, in 2nd post) under Xposed Installer together with Floatifications
I installed this today, and I must say excellent job. Almost everything is working great. I only have one issue, Amazon Prime Instant Video app work great on the stock rom, but is incompatable running CM 11. Does anyone else use Prime? If so is there a work around? Thanks in advance.
Sent from my SM-T900 using Tapatalk
v1 or v2?
Sorry for a bit of a silly question.....everything i have (twrp and cpu z apps) say i have a v2wifiue. However, when I try to install i get the error message that says it is a v1. I am not sure how to proceed. I have a tab pro sm t900 purchased in USA at best buy, again, thinking it is v2. Please advise, i am looking forward to this ROM. Thanks for all of your efforts.
----EDIT----
I went into the build prop just to see the fingerprint and build id(s) and it is all 100% V2. I hope this will help someone identify my problem. Thanks again
I installed this today and everything was working great for the inital setup. Upon trying to download and finalize all my app setups I started to have issues. Examples are google play music, bitdefender, and facebook for this part. Play music started downloading all the music fine till about half way, then got stuck. Bitdefender was successfully setup but when starting inital scan it got to 1% and doesnt get past it. Facebook opens up then autoloads my email in the username but when i try to type it locks up and crashes. Tried to get it to reboot and it also locked. Held power button till finally reset and when it started back up it auto started downloading songs. It downloaded a few songs again and then locked up again. Any ideas of what I can try to get this working better? Also anyone know of a keyboard that has a floating keyboard like the samsung one that we have on the 12.2? Any and all help is greatly appreciated.
Everything seems to work fine except tab hanging when left in stand by for more than an hour and playing with lid cover on n off several times I have to hard restart, did factory reset twice, any suggestions appreciated greatly.
Sent from my SM-T900 using XDA Free mobile app
csmoore88 said:
Sorry for a bit of a silly question.....everything i have (twrp and cpu z apps) say i have a v2wifiue. However, when I try to install i get the error message that says it is a v1. I am not sure how to proceed. I have a tab pro sm t900 purchased in USA at best buy, again, thinking it is v2. Please advise, i am looking forward to this ROM. Thanks for all of your efforts.
----EDIT----
I went into the build prop just to see the fingerprint and build id(s) and it is all 100% V2. I hope this will help someone identify my problem. Thanks again
Click to expand...
Click to collapse
What version of TWRP did you install?
Sent from my SM-N900V using Tapatalk
Zeroskhaos said:
I installed this today and everything was working great for the inital setup. Upon trying to download and finalize all my app setups I started to have issues. Examples are google play music, bitdefender, and facebook for this part. Play music started downloading all the music fine till about half way, then got stuck. Bitdefender was successfully setup but when starting inital scan it got to 1% and doesnt get past it. Facebook opens up then autoloads my email in the username but when i try to type it locks up and crashes. Tried to get it to reboot and it also locked. Held power button till finally reset and when it started back up it auto started downloading songs. It downloaded a few songs again and then locked up again. Any ideas of what I can try to get this working better? Also anyone know of a keyboard that has a floating keyboard like the samsung one that we have on the 12.2? Any and all help is greatly appreciated.
Click to expand...
Click to collapse
I haven't had any similar problems. Did you do a clean install with wipe of data and cache? You could wipe cache from recovery and see if that helps.
Sent from my SM-N900V using Tapatalk
I just started seeing a problem that I thought had been fixed - and now I can't seem to find a solution myself. I had previously had Greenify working happily with the Xposed Framework, but now it has stopped doing so. Every time I enter the Xposed-based Features menu and try to enable anything, I'm taken to the Xposed Setup Guide screen, with only the "ACTIVATE MODULE, REBOOT" button enabled. This in turn takes me to the Xposed Installer; clicking on "Framework" tells me that Xposed framework version 86 (previously 85 - I tried updating but it didn't make any difference) is already active. No amount of rebooting, cache-clearing, or re-flashing seems to help. The problem appears to have re-appeared within the last week or two (I'm not sure exactly, since the only way to know there's a problem is to go into Greenify settings and check). Here are the details of my setup:
Samsung I9300
Cyanogenmod 6.0.1, 26 August 2016 "nightly" version
Greenify version 2.9 (I signed up for Beta within the last 24 hours - but I don't see any indication that I've received any Beta updates)
Xposed Installer 3.0 Alpha 4
Xposed Framework V86-sdk23-arm
The only thing I see in the Xposed log that seems at all helpful is this:
Loading modules from /data/app/com.oasisfeng.greenify-2/base.apk
File does not exist
Anyone have any ideas about what's going wrong here?
Thanks in advance for any light you can shed!
Don Radlauer said:
I just started seeing a problem that I thought had been fixed - and now I can't seem to find a solution myself. I had previously had Greenify working happily with the Xposed Framework, but now it has stopped doing so. Every time I enter the Xposed-based Features menu and try to enable anything, I'm taken to the Xposed Setup Guide screen, with only the "ACTIVATE MODULE, REBOOT" button enabled. This in turn takes me to the Xposed Installer; clicking on "Framework" tells me that Xposed framework version 86 (previously 85 - I tried updating but it didn't make any difference) is already active. No amount of rebooting, cache-clearing, or re-flashing seems to help. The problem appears to have re-appeared within the last week or two (I'm not sure exactly, since the only way to know there's a problem is to go into Greenify settings and check). Here are the details of my setup:
Samsung I9300
Cyanogenmod 6.0.1, 26 August 2016 "nightly" version
Greenify version 2.9 (I signed up for Beta within the last 24 hours - but I don't see any indication that I've received any Beta updates)
Xposed Installer 3.0 Alpha 4
Xposed Framework V86-sdk23-arm
The only thing I see in the Xposed log that seems at all helpful is this:
Loading modules from /data/app/com.oasisfeng.greenify-2/base.apk
File does not exist
Anyone have any ideas about what's going wrong here?
Thanks in advance for any light you can shed!
Click to expand...
Click to collapse
Though I don't have any solutions for you, I note from Xposed log that for me what is loaded is "/data/app/com.oasisfeng.greenify-1/base.apk". I don't know why it searches for greenify-2 for you whereas it loads greenify-1 for me. There is no reference to greenify-2 in my log. Further, the file in /data/app/ is named com.oasisfeng.greenify-1 for me and it contains the base.apk file.
Does this info help you in any way?
Please avoid greenifying Xposed app, this may lead to the issue above.
Hey buddy, it's just simple.
Follow the steps:
1.Go to xposed framework app.
2. Go to modules. (From menu at right top corner)
3.Then just enable greenify.
Comment me if it solved your problem.
Hi, I'm using the last version of Greenify on stock marshmallow rom and I'm not able to cut off paths anymore for apps that wake up by themselves.
There is no "scissors" icon anymore.
Wake up tracker is enabled in settings but I can't enable "enhanced wake up tracker" (a message appears "not supported by the rom")
I'm in root + boost (xposed) mode and I bought donation package.
No problems with previous versions.
Euphorion said:
Hi, I'm using the last version of Greenify on stock marshmallow rom and I'm not able to cut off paths anymore for apps that wake up by themselves.
There is no "scissors" icon anymore.
Wake up tracker is enabled in settings but I can't enable "enhanced wake up tracker" (a message appears "not supported by the rom")
I'm in root + boost (xposed) mode and I bought donation package.
No problems with previous versions.
Click to expand...
Click to collapse
Also running a near AOSP stock MM ROM with root/Xposed and have access to both features. Suggest uninstalling/reinstalling Greenify with a reboot between.
Davey126 said:
Also running a near AOSP stock MM ROM with root/Xposed and have access to both features. Suggest uninstalling/reinstalling Greenify with a reboot between.
Click to expand...
Click to collapse
Thanks for your answer. I did that and installed the last new version (3.2.1) but no effects... One change : when I try to enable enhanced wake up tracker a pop-up appears for one second ("Applying... ") but it still failed saying it's not supported by the rom.
I come from LineageOS 14.1 and I flashed the whole stock marshmallow firmware. Maybe it has something to do with this...
Weird : I tested adb commands to enable wake up cut off for non-root devices (although i'm rooted+xposed)
adb -d shell pm grant com.oasisfeng.greenify android.permission.READ_LOGS
adb -d shell pm grant com.oasisfeng.greenify android.permission.WRITE_SECURE_SETTINGS
Click to expand...
Click to collapse
Results : cut off paths are back (with the scissors icon) and I have informations on the opened apps ("UI opened xx seconds ago" "Service started by..."). With my "issue" I didn't have these informations anymore.
The strange thing is that I still can't enable enhanced wake up tracker in settings (same message as mentioned before).
Long story short : Although i'm rooted there is something that may block greenify to read/write settings in order to track apps so I have to manually enable wake up cut off via adb commands.
Euphorion said:
Thanks for your answer. I did that and installed the last new version (3.2.1) but no effects... One change : when I try to enable enhanced wake up tracker a pop-up appears for one second ("Applying... ") but it still failed saying it's not supported by the rom.
I come from LineageOS 14.1 and I flashed the whole stock marshmallow firmware. Maybe it has something to do with this...
Click to expand...
Click to collapse
Euphorion said:
Weird : I tested adb commands to enable wake up cut off for non-root devices (although i'm rooted+xposed)
Results : cut off paths are back (with the scissors icon) and I have informations on the opened apps ("UI opened xx seconds ago" "Service started by..."). With my "issue" I didn't have these informations anymore.
The strange thing is that I still can't enable enhanced wake up tracker in settings (same message as mentioned before).
Long story short : Although i'm rooted there is something that may block greenify to read/write settings in order to track apps so I have to manually enable wake up cut off via adb commands.
Click to expand...
Click to collapse
Interesting. I'm vacillating between a near-stock MM build and LinOS 14.1 on a couple devices and haven't run into this...yet. Obviously reduced Geeenify functionality on Nougat w/o Xposed. Appreciate you sharing findings; should be helpful should this issue arise. Hopefully others can offer insight into lingering wake-up tracker issue.
I'm on LOS 13 Greenify 3.0.5.
I noticed an app still started somehow even after I manually hibernate it. wake-up tracker is enabled, wake-up cut-off is enabled.
I'm facing the same issue on 2 Motorola G 2014 devices and 1 Moto E 2015, all on MM roms, root + xposed.
Same here, LineageOS 13 with root+Xposed and donation package, the feature is enabled and even enhanced tracker is enabled but the scissors never show up
Same problem here with Greenify 3.2.2 paid version!!
Samsung Note 3 Neo (SM-N7505) Lollipop 5.1.1 Root Xposed.
I hope on next version to fix it...
I can hardly find any informatie on how to install Greenify on a multi(ple) user setup.
In my case, Android 4.4 and 5.0, non-rooted tablets.
Does Greenify work on al users (present on tablet) when installed on main-account or do I have to install it on all present user-accounts?
bemoo said:
I can hardly find any informatie on how to install Greenify on a multi(ple) user setup.
In my case, Android 4.4 and 5.0, non-rooted tablets.
Does Greenify work on al users (present on tablet) when installed on main-account or do I have to install it on all present user-accounts?
Click to expand...
Click to collapse
In a non-rooted configuration I suspect Greenify will need to be installed and configured on each sub-account. That might present headaches/issues with some operations like auto hibernate and screen off.
Not a common usage scenero; you will likely need to learn/adapt on-the-fly.