Related
I made an Xposed module it should work on any device with installed Xposed framework. Feel free to try and send me feedback.
I can not guarantee that this will work with every device/rom but it should on most! There are several reports of issues with TouchWiz based ROMs
UPDATE:
Module is now available under Downloads in the Xposed app itself. Please Download it from there!
guide:
1. install http://dl.xposed.info/latest.apk
2. open app click "Framework" and "Install/Update"
3. click Download and choose XVolume
4. click Download again and install app
5. click Modules and tick XVolume30
3. Install my apk
4. open Xposed app and go to "Modules"
5. tick XVolume
6. Reboot
7. enjoy
If it dosn't work for you please post me your /data/xposed/debug.log here.
UPDATE: Simple UI added. Remove old app before installing the new one in Setting->Apps please.
Original mod without xposed (but a little more tricky) http://forum.xda-developers.com/showthread.php?t=2326333
How to check that it's working?
Sent from my GT-N7100 using Tapatalk 4
lontu said:
How to check that it's working?
Sent from my GT-N7100 using Tapatalk 4
Click to expand...
Click to collapse
Turn the mediavolume down to zero. Then press Vol+ and count. You should have 30 Steps now. If not so please post or send me your /data/xposed/debug.log
THX
It works perfectly on Cataclysm ROM (Google based) on GNex. Thank you so very much! I had another module that had tons of mods I did not need. Happy Happy!! I'll post this in a couple threads and get more traffic here.
Works great thanks!
Working great on both of my Nexus 7 and 10 running Rasbeanjelly. Thanks.
using Xposed v2.2 installed but will not show up in both Xposed modules or in the Apps list.
EDIT: Installed through the new v2.2 download interface and that works.
after the step 15 we have a boost of volume?
Inviato dal mio maguro usando Tapatalk 4
StormIceX said:
after the step 15 we have a boost of volume?
Inviato dal mio maguro usando Tapatalk 4
Click to expand...
Click to collapse
I'm not shure but i think max volume stays the same but with more steps you can adjust the volume better.
nice,working fine on an LG Optimus L7 II (P714) :good:
I'm trying to figure out what this module does exactly can someone please explain it to me?
Thank you
Works perfectly for me on Mokee rom. Thank you.
Working flawlessly on temasek's cm10.2 v36. Thanks
TP.
Not working properly
30 Steps volumn is not working properly with Note 2 Thunder Lite v5 rom. There is no sound on step 17 and from steps 26-30. PFA the debug.log from /data/xposed
Thanks
What does this mod actually do? Thanks
♦ToroNex-Vanir
Sheetzie03 said:
What does this mod actually do? Thanks
♦ToroNex-Vanir
Click to expand...
Click to collapse
Does the thread title not explain it for you?
TP.
I see that in the xposed app you said for cm10.2. Does it work with other AOSP ROMs as well? Because my ROM is PAC 4.3 and the 30 steps volume mod does not work. Here is the debug.log. http://db.tt/SmaMcbyN
Sent from my GT-P7500 using Tapatalk HD
hansthegeek said:
I made an Xposed module it should work on any device with installed Xposed framework. Feel free to try and send me feedback.
UPDATE:
Module is now available under Downloads in the Xposed app itself. Please Download it from there!
guide:
1. install http://dl.xposed.info/latest.apk
2. open app click "Framework" and "Install/Update"
3. click Download and choose XVolume
4. click Download again and install app
5. click Modules and tick XVolume30
3. Install my apk
4. open Xposed app and go to "Modules"
5. tick XVolume
6. Reboot
7. enjoy
If it dosn't work for you please post me your /data/xposed/debug.log here.
Mod without xposed (but a little more tricky) http://forum.xda-developers.com/showthread.php?t=2326333
Click to expand...
Click to collapse
Could you make a 45 step version please?
GaMeFaNaTi3 said:
Could you make a 45 step version please?
Click to expand...
Click to collapse
Yes
Sent from my Nexus 4 using Tapatalk 2
eushaun99 said:
I see that in the xposed app you said for cm10.2. Does it work with other AOSP ROMs as well? Because my ROM is PAC 4.3 and the 30 steps volume mod does not work. Here is the debug.log. http://db.tt/SmaMcbyN
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
Deleted
Sent from my Nexus 4 using Tapatalk 2
As everyone knows, in Lollipop most statusbars change colors once an app is opened. This is a feature many of us have enjoyed for some time with xposed in the past. I have a G5 Active running 5.0. Since I'm on att, I am running stock so I can use xposed as of now. With that said, does anyone know how I can change Facebooks status bar? It seems to be the only major app that won't change on its own. Thanks for any direction.
Use xposed module for that
Try lollistats
Sorry, as I said in the post, I can't use xposed as I am on stock TouchWiz.
Modded xposed working on touchwhiz. You can use that
Infuser86 said:
Sorry, as I said in the post, I can't use xposed as I am on stock TouchWiz.
Click to expand...
Click to collapse
Make backup and try xposed from arter97 it works for me on stock tw s5.
Verstuurd vanaf mijn SM-G900F met Tapatalk
How did you install the necessary files without a custom recovery?
FlemishDroid said:
Make backup and try xposed from arter97 it works for me on stock tw s5.
Verstuurd vanaf mijn SM-G900F met Tapatalk
Click to expand...
Click to collapse
You're oxeded and it works?
SBXposed bypasses the Xposed restriction in the Sparkasse(+) App.
Requirements
- Xposed Framework
- Sparkasse / Sparkasse+ app at least version 3.0.0
- Android 4.4+
Usage
1. Install SBXposed
2. Activate module in XposedInstaller
3. Reboot
4. Have fun with unblocked app.
Download
You can download the mod via XposedInstaller or directly from Repository: repo.xposed.info/module/tmh.sbxposed
Github: https://github.com/tmhzxy/SBXposed
Support
The module was tested by me on latest CM13 nightly for the latest version of the app. It should be working fine on other ROMs.
Please leave feedback with an Xposed log and the apk from Sparkasse(+) app if not working, so I can take a look at it.
I will not add any new features. This module is only for skipping the Xposed / partial root restriction.
Changelog
1.0: Initial module.
1.1: Fix min. XposedBridge version to 53 for Kitkat.
Works like a charm on Sultans latest cm13 (op3) with xposed and Sparkasse+! Thank you very much!
Works pefectly. I knew this Module would come. Like i statet in my Playstore Review. Thank you very much.
I can run the Sparkasse+ app v3.0.0 without this module. And I have Xposed installed, of course. Why do you need it?
Won't work for me
Hi there,
is there any possibilty for me to activate this app under xposed v.2.6.1? The module keeps telling my xposed is too old (though there are no updates available for me).
Galaxy Note 4, Stock 4.4.4
meiser said:
I can run the Sparkasse+ app v3.0.0 without this module. And I have Xposed installed, of course. Why do you need it?
Click to expand...
Click to collapse
Meanwhile, Xposed detection is installed. Unfortunately, the detection works at most, so I created the module. If this is not the case, your setup would interest me.
Musikologin said:
Hi there,
is there any possibilty for me to activate this gem under xposed v.2.6.1? The module keeps telling my xposed is too old (though there are no updates available for me).
Galaxy Note 4, Vanilla 4.4.4
Click to expand...
Click to collapse
New version published. Should work now.
Thank you! Works great!
@tmh_: Dude i love you ?
Sent from my LG-D855 using XDA Labs
tmh_ said:
Meanwhile, Xposed detection is installed. Unfortunately, the detection works at most, so I created the module. If this is not the case, your setup would interest me.
Click to expand...
Click to collapse
I'm running CM 13.0 nightly (latest version from 2016/11/07) on a OnePlus3, I installed SuperSU 2.78 SR5, suhide 0.55 and seamless Xposed 86.1 by romracer.
tmh_;69867331
New version published. Should work now.[/QUOTE said:
Thank you for your quick update! Unfortunately it still won't work - module is installed and activated via xposed, but after a reboot my sparkasse app (which I have uninstalled and reinstalled again) still thinks I'm a dangerous criminal or whatever... still detects my installed xposed framework.
(BTW cloak root module wouldn't work either.)
Maybe I will just stick with version 2.9.1 as long as possible.
Update: I tried same thing with my daughter's z1 compact running CM11. It doesn't work here either - so it has probably something to do with kitkat roms, no matter if stock or custom.
I'm too old fashioned, can't say goodbye to kitkat...
Click to expand...
Click to collapse
Musikologin said:
tmh_;69867331
New version published. Should work now.[/QUOTE said:
Thank you for your quick update! Unfortunately it still won't work - module is installed and activated via xposed, but after a reboot my sparkasse app (which I have uninstalled and reinstalled again) still thinks I'm a dangerous criminal or whatever... still detects my installed xposed framework.
(BTW cloak root module wouldn't work either.)
Maybe I will just stick with version 2.9.1 as long as possible.
Click to expand...
Click to collapse
I need the Xposed log to understand the error.
Click to expand...
Click to collapse
tmh_ said:
I need the Xposed log to understand the error.
Click to expand...
Click to collapse
Sure, it says:
SBXposed: Try to find protect classes...
SBXposed: 1 classes found
Nothing more I can find related to this module.
Musikologin said:
Sure, it says:
SBXposed: Try to find protect classes...
SBXposed: 1 classes found
Nothing more I can find related to this module.
Click to expand...
Click to collapse
I have built a version in which more things are logged. This logging is explicit only for Android <5.0 and only for debugging, as this is a performance loss.
After testing app, I need the complete Xposed log.
tmh_ said:
I have built a version in which more things are logged. This logging is explicit only for Android <5.0 and only for debugging, as this is a performance loss.
After testing app, I need the complete Xposed log.
Click to expand...
Click to collapse
I really appreciate your effort!
My request now is somewhat embarrassing *cough*:
How exactly do I extract an apk file from the attached zip?
After unzipping all I I get is a bunch of folders and for me rather uncommon file types.
Musikologin said:
I really appreciate your effort!
My request now is somewhat embarrassing *cough*:
How exactly do I extract an apk file from the attached zip?
After unzipping all I I get is a bunch of folders and for me rather uncommon file types.
Click to expand...
Click to collapse
The attachment is the apk. Sometimes the apk may be opened by a program as a zip file.
tmh_ said:
The attachment is the apk. Sometimes the apk may be opened by a program as a zip file.
Click to expand...
Click to collapse
Although it's named apk, it's only shown as a zip file after the download. On my Windows device as well as on my smartphones. I can only flash zips on my phone but that's probably not the way it should work.
Edit: The download via QR worked. I will test it and tell you. Tomorrow. Short baby night ahead .
Thank you!
Thanks man, works flawlessly on my Note 4 with 6.0.1
Thanks, i first used my old sparkasse app from titanium backup until i saw this modul.
Works as expected, thanks for your work.
Works as expected. Great! And thanks [emoji122] [emoji122] [emoji122]
Sent from my XT1562 using XDA-Developers mobile app
Thank you for sharing the module, works just fine. I don't understand how Sparkasse can block everyone out using Xposed...
Sup guys! I was finally able to find time to convert my previous patch for EPM to an Xposed module! This was not as simple as I expected, as it required dynamic XML generation/integration, which can be cumbersome to say the least. I tried to keep the code as generic as possible to support other models of the A2017, but there are no guarantees beyond the US model. I did add a configurable option to add a bootloader button, but as of this posting (B32), ZTE has disabled this functionality.
FAQ:
1. Can you add support for my model?
- Possibly, but at the minimum you would need to post your framework-zte-res.apk. Specifically, the files layout/global_dialog.xml and layout-land/global_dialog.xml are needed.
2. Does this support MiFavor 5.x?
- I cannot say, it's only been tested on A2017U B32, which uses MiFavor 4.x.
Thanks to wanam for the simple settings popup and apsun for the RemotePreferences library.
Xposed page: http://repo.xposed.info/module/com.none.epm_zte
very cool that you did a "port", have my thanks - even when I'm not running stock most of the time
Works xposed in Mifavor? 4.x or 5.0?
BaamAlex said:
Works xposed in Mifavor? 4.x or 5.0?
Click to expand...
Click to collapse
Only tested on B32 thus far, which runs MiFavor 4.2.
Works on Sl!m M!Favor 5.0 / 7.1.1 v 2.0. (A2017G).
Thanks man! Your the greatest! Any chance you can add the 3minit battery mod like last time
I would love to use this, however i don't want to install Xposed since i don't want to break safetynet...is there any way you can make this a magisk module as well?
Teet1 said:
I would love to use this, however i don't want to install Xposed since i don't want to break safetynet...is there any way you can make this a magisk module as well?
Click to expand...
Click to collapse
There's an Xposed magisk module tho
Choose an username... said:
There's an Xposed magisk module tho
Click to expand...
Click to collapse
It still breaks safetynet
Teet1 said:
It still breaks safetynet
Click to expand...
Click to collapse
Yes but the Xposed Installer app has a toggle switch to temporarily disable Xposed. So whenever you need to use an app such as Android Pay just disable Xposed and and then re-enable it when you're done.
bkores said:
Yes but the Xposed Installer app has a toggle switch to temporarily disable Xposed. So whenever you need to use an app such as Android Pay just disable Xposed and and then re-enable it when you're done.
Click to expand...
Click to collapse
Not worth it if i have to reboot my phone when I want to play games that require safetynet and use banking every time oh well, can't have all the pleasures in the world, but it would be nice to have this as a magisk module.
The thing is, I don't believe it's possible since you need to replace a small part of a file, not the whole file. I don't know how the Xposed module works (or Xposed itself) but I believe it somehow replaces that small part. If there was a Magisk module you wouldn't be able to further modify the framework and it would only work for one mifavor version.
I think this was already discussed but about a flashable zip version
Edit: Yeah, the dev talks about dynamic XML generation/integration
Choose an username... said:
The thing is, I don't believe it's possible since you need to replace a small part of a file, not the whole file. I don't know how the Xposed module works (or Xposed itself) but I believe it somehow replaces that small part. If there was a Magisk module you wouldn't be able to further modify the framework and it would only work for one mifavor version.
I think this was already discussed but about a flashable zip version
Edit: Yeah, the dev talks about dynamic XML generation/integration
Click to expand...
Click to collapse
This is correct. I went with Xposed for better compatibility across multiple h/w & s/w versions. ROM authors can likely cook it into their framework using the tutorial from the other thread :good:
Ah bummer. I was hoping to use this module but I'm running v87 Xposed (PurifyOS). EPM requires v88.x. I'm only on unofficial Xposed because Unicon works with it.
If I decide I don't need Unicon I'll definitely update and use EPM.
At the moment I'm using one of the many reboot menu utilities to popup on double press of the back button (using Button Mapper).
LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
jeboo said:
This is correct. I went with Xposed for better compatibility across multiple h/w & s/w versions. ROM authors can likely cook it into their framework using the tutorial from the other thread :good:
Click to expand...
Click to collapse
I can confirm that this works on stock A2017G B09 with flashable Xposed. may also work with topjohnwu's Xposed but I couldn't manage to make the modded xposed installer find the xposed installation
The ROM is stock B09, from raystef66's flashable zips
Here's a screenshot where you can barely see the model below
So basically you can add that it's compatible with G-B09 somewhere
jeboo said:
2. Does this support MiFavor 5.x?
- I cannot say, it's only been tested on A2017U B32, which uses MiFavor 4.x.
[/URL]
Click to expand...
Click to collapse
Works on MF5.0 too (either SuperSu or Magisk). Only if you use the flashable xposed framework v88.2 SDK25 + xposed installer + your apk.
Thnx ! (does not work through Magisk module installing the framework. Installer error framework not installed)
works on B35
Works on B09 Nougat on A2017G, although it does not play nice when messing with screen dpi. I am currently on 500 and icons are misaligned.
For those interested we can now run XPosed on XZ1
Me myself I have FW 47.1.A.12.34
Install the DRMFix according to post 53 in the [oreo]XZ1-drmfix-root-ricoff. This gives me recovery, root and DRMFix.
Then I downloaded and flashed installed XPosed and the installer from the [OFFICIAL] Xposed for Lollipop/Marshmallow/Nougat/Oreo thread
SDK for OREO 8.0 (which is the version in FW 47.1.A.12.34) is SDK26 and the architecture is Arm64.
I Flashed the XPosed zip, booted phone and installed the XposedInstaller apk. The app then told me the framework was installed but not loaded, so I istalled it once more from the app (direct install, not using recovery). After reboot did everything work as a charm
I used to use Xposed but I can't think of any modules that are worth bothering with the install these days. Can you recommend anything worthwhile bro?
N1ghtr08d said:
I used to use Xposed but I can't think of any modules that are worth bothering with the install these days. Can you recommend anything worthwhile bro?
Click to expand...
Click to collapse
I actually only use a package for greenify and a "Eventlock" module to get my calendar data on the lockscreen
Yeah, that's the problem for me. Xposed used to be about to do so much that Android couldn't but the OS has come so far now that I don't feel the need for it anymore.
Sent from my G8341 using Tapatalk
Yeeea.....bur I just had to check it out when I saw there is a beta version of Xposed for Oreo.
Just because I'm curious
I know, I feel the same way but just didn't see the benefit of it at the time. I used to love Xposed. I actually forgoe certain upgrades because I would lose Xposed in the past. Those days are gone now though.
For all who are intrested:
Gravity Box for Oreo is now released!
I think the best XPosed Modul on the Repository!
pergoteborg said:
For those interested we can now run XPosed on XZ1
Me myself I have FW 47.1.A.12.34
Install the DRMFix according to post 53 in the [oreo]XZ1-drmfix-root-ricoff. This gives me recovery, root and DRMFix.
Then I downloaded and flashed installed XPosed and the installer from the [OFFICIAL] Xposed for Lollipop/Marshmallow/Nougat/Oreo thread
SDK for OREO 8.0 (which is the version in FW 47.1.A.12.34) is SDK26 and the architecture is Arm64.
I Flashed the XPosed zip, booted phone and installed the XposedInstaller apk. The app then told me the framework was installed but not loaded, so I istalled it once more from the app (direct install, not using recovery). After reboot did everything work as a charm
Click to expand...
Click to collapse
I have the same problem with Xposed on FW 47.1.A.12.179 with SDK26 v. 90-beta 3 but workaround doesn't work.
pepe_k said:
I have the same problem with Xposed on FW 47.1.A.12.179 with SDK26 v. 90-beta 3 but workaround doesn't work.
Click to expand...
Click to collapse
Same here... It's sad to see there is nothing to do but waiting
TurkO546 said:
Same here... It's sad to see there is nothing to do but waiting
Click to expand...
Click to collapse
Same problem, on my xperia xz premium .179, xposed doesn't work since .75,
I try for a week...trying all solutions, nothing works, xposed installer tells me that xpoed is installed but doesn't work.
waiting for solutions from @rovo89 :good:
Castiglionais said:
Same problem, on my xperia xz premium .179, xposed doesn't work since .75,
I try for a week...trying all solutions, nothing works, xposed installer tells me that xpoed is installed but doesn't work.
waiting for solutions from @rovo89 :good:
Click to expand...
Click to collapse
Thanks for the report. If you know about a fix when it's available, please share the info.
Castiglionais said:
Same problem, on my xperia xz premium .179, xposed doesn't work since .75,
I try for a week...trying all solutions, nothing works, xposed installer tells me that xpoed is installed but doesn't work.
waiting for solutions from @rovo89 :good:
Click to expand...
Click to collapse
Yes @rovo89 Please help!
I tried to install Beta 2 to my G8341 and the phone booted (.179 firmware)
I tried to install simple modules like "Statusbar Download Progress" and it is activated.
but installing gravitybox caused bootloop
that's weird and good news guys
TurkO546 said:
I tried to install Beta 2 to my G8341 and the phone booted (.179 firmware)
I tried to install simple modules like "statusbar download process" and it is activated.
but installing gravitybox caused bootloop
that's weird and good news guys
Click to expand...
Click to collapse
Yes, very good news. How did you solve bootloop? Did you flash a unistall zip from twrp?
snake218 said:
Yes, very good news. How did you solve bootloop? Did you flash a unistall zip from twrp?
Click to expand...
Click to collapse
1- uninstalled xposed via twrp
2- booted
3- uninstalled the module
4- installed beta 2 again and xposed working now
battery care+ also working
TurkO546 said:
I tried to install Beta 2 to my G8341 and the phone booted (.179 firmware)
I tried to install simple modules like "statusbar download process" and it is activated.
but installing gravitybox caused bootloop
that's weird and good news guys
Click to expand...
Click to collapse
I'll try this tutorial, i'll give feedback later, thanks
i confirm Xposed beta 2 working on fw .179 (G8342 dual)
GravityBox caused bootloops...
monsieurlezard said:
i confirm Xposed beta 2 working on fw .179 (G8342 dual)
GravityBox caused bootloops...
Click to expand...
Click to collapse
Pls gimme a downlaod link of beta 2 can't find it on internet.
pw1nce said:
Pls gimme a downlaod link of beta 2 can't find it on internet.
Click to expand...
Click to collapse
https://dl-xda.xposed.info/framework/sdk26/arm64/
TurkO546 said:
1- uninstalled xposed via twrp
2- booted
3- uninstalled the module
4- installed beta 2 again and xposed working now
battery care+ also working
Click to expand...
Click to collapse
Beta 2 activated but when i install a mod my device going to bootloop