Hi,
My mobile name is "Walton Primo-GF4" it's Android version Lollipop 5.1 and Chipset "MTK6580" I want to ROOT my phone!! I also tried many kind of ROOT Apps.. Like: Framroot, Kingroot, iRoot, Baidu Root, A-Key Rootmaster etc but all apps didn't worked!!
NOTE: MY PHONE ALSO UNLOCKED BOOTLOADER
My Acer tablet runs Android version Lollipop 5.1 with CPU MTK8151. I also tried many kind of root Apps including Framroot, Kingroot, and Kingo Android Root but none of the apps worked. I would welcome any suggestions.
How to install and recowery TWRP ROOT - as I do.
On the drain insertion rekaveri I did not run after the entry androyd lying belly to the top with an exclamation mark.
1) Put Flash Tool 5
1.1) Put the USB driver on the PC (It is advisable to disable the driver signature verification in windows- google to help)
2) Download Recovery - TWRP
3) Fail scatter
------ = 2.3 points lozhish files in a separate folder ---
4) I can not remember without root works or not, but just in case I will write. If you need a backup of your phone (need Flash card gigs 4-8) is placed on the phone titanium backup - you come - Click on the second tab (backups) from the top of the icon sheet daw - choose "Make RK entire user software." move to backup to a different folder, and once again do but to "make all RK custom software and system data" - this just in case.
5) Turn off the phone
6) includes a program Flash Tool
7) specifies the path to the file scatter
8) Should Fail recovery stand daw
9) Put Download only
10) Press Download
11) Connect the power cord to the body.
After excluding telephone (ALWAYS !!!!) Press VOL +, and ON. together, should see boot menu, select the button and press the + recovery - to go to TWRP
In the TWRP - press "backup" in the next window, you put all the jackdaws and snap your top do not remember exactly where, but there you can select the external sd card to record backup. and backup for 10 more minutes.
All of us do not care at all, you can do what you want =))
Then do in TWRP reboot in normal mode (need WI-FI), should appear with an offer to make a root or not to do - disagree. body boot turn on the 'Net WI-FI and start downloading the patch for the root, then as a patch will be downloaded will choose the menu that appears after installation TWRP, body restarts itself do everything.
ALL! Ruth received.
use CF-auto-Root
Hey, guys New kingroot app version is worked mt6580.. now my Walton-GF4 is ROOTED, Thanks Everyone!!
can you give me link new version kingroot . i have kingroot 4.9.0 its not work my mt6580 Android 5.1
magik235 said:
My Acer tablet runs Android version Lollipop 5.1 with CPU MTK8151. I also tried many kind of root Apps including Framroot, Kingroot, and Kingo Android Root but none of the apps worked. I would welcome any suggestions.
Click to expand...
Click to collapse
Try downloading latest MTK droid tool and see if it detects your phone. If it detects, then you could just root by clicking root button. If you do not know how to use MTK droid tool, just search for the instruction on XDA. Pretty easy.
twrp-custom-recovery-for-wiko-sunny
tlysovych said:
How to install and recowery TWRP ROOT - as I do.
On the drain insertion rekaveri I did not run after the entry androyd lying belly to the top with an exclamation mark.
1) Put Flash Tool 5
1.1) Put the USB driver on the PC (It is advisable to disable the driver signature verification in windows- google to help)
2) Download Recovery - TWRP
3) Fail scatter
------ = 2.3 points lozhish files in a separate folder ---
4) I can not remember without root works or not, but just in case I will write. If you need a backup of your phone (need Flash card gigs 4-8) is placed on the phone titanium backup - you come - Click on the second tab (backups) from the top of the icon sheet daw - choose "Make RK entire user software." move to backup to a different folder, and once again do but to "make all RK custom software and system data" - this just in case.
5) Turn off the phone
6) includes a program Flash Tool
7) specifies the path to the file scatter
8) Should Fail recovery stand daw
9) Put Download only
10) Press Download
11) Connect the power cord to the body.
After excluding telephone (ALWAYS !!!!) Press VOL +, and ON. together, should see boot menu, select the button and press the + recovery - to go to TWRP
In the TWRP - press "backup" in the next window, you put all the jackdaws and snap your top do not remember exactly where, but there you can select the external sd card to record backup. and backup for 10 more minutes.
All of us do not care at all, you can do what you want =))
Then do in TWRP reboot in normal mode (need WI-FI), should appear with an offer to make a root or not to do - disagree. body boot turn on the 'Net WI-FI and start downloading the patch for the root, then as a patch will be downloaded will choose the menu that appears after installation TWRP, body restarts itself do everything.
ALL! Ruth received.
Click to expand...
Click to collapse
I wish it could work for me to?
but ´till now noppes nada nothing,, I'll try to send up some files like the scatter file and custom recovery rom, maybe you´re able to check them out, what is wrong with it.?
Related
Hi,
I bought this phone from China and I wanted to convert it to an international regular android phone.
This sounds easy, the theory is that, root the phone to get rid of Chinese apps then install Google Play... that would be sufficient for me.
The problem is that in practice that proved to be more complicated especially if one have not done this before.
The Phone
ZTE V5S / Grand Memo 5S
Hardware Platform: MT6589
Cores: Quad Core
CPU: 1.5G Hz
GPU: PowerVR SGX544MP
RAM: 1GB
ROM: 8GB
Display Size: 5.7 inch HD
Screen Resolution: 720×1280
Screen Type: IPS-LCD, Multi-Touch Capcitive Screen
Display Colour: 16 Million Colors
Operating System: Android 4.2
I have read forums in the last couple of days and managed to:
- root the device
- remove china stuff
- installed Google Play
The store is working but the Google apps such as YouTube are giving this error:
"Google Play services, which some of your applications rely on, is not supported by your device. Please contact the manufacturer for assistance."
I understand (from googling) that I have to instal a new ROM which is modified to support this.
I have downloaded couple of ROMs from Chinese sites but following their instructions, I could not install the ZIP files.
Not speaking Chinese, used web translation.
Ideally, I am looking to install a multilingual ROM for my device.
Later edit: I have installed the google play posted here and now youtube works but play is crashing if i try to install anything.
Any help highly appreciated.
Thank you.
[Resolved] Flashing ZTE Grand Memo 5S (aka ZTE Memo V5S)
Managed to resolve my problem... here is the step by step guide.
As usual, I'm not responsible if you brick your pone, is your decision to follow the below steps.
Some advices:
- Use a good quality USB cable which plugs firmly in the phone and PC
- Make sure that eventual power outage does not power off pc (ie use laptop)
- Do not unplug cable (accidentally) from PC/Phone while program running and last message is not: --- task is complete ---
- Try not using PC for other (resource consuming) activities.
- Be patient... some processes take quite long time
- Upload ROM which is designed for Your device!
- If you want to download ROM using SP Flash Tool, you need to dismount the phone as battery is not removable. Make an NANDROID
backup as this will backup absolutely everything... including user data.
1. Download MTK Droid Tools (because this is a MediaTek device)
2. Download SP Flash Tool (not used... just to have it in case you need to flash back a backup)
3. DOwnload a ROM (ZTE_V5S_WCDMA_Google_ROOT_140522.zip)
4. DOwnload a Patch for splash screen in Zip format (optional).
5. Copy to sd card:
- The downloaded ROM, rename to "update.zip". This is important otherwise will might give an error when flasing.
- The splash screen patch if you have it.
- Insert sd card in the phone.
6. Open MTKdroidTools.exe
- in few minutes your phone details should show up on Phone information tab.
7. Connect Phone via USB to PC
8. In USB computer options choose to connect with option "Connect to PC software", this will turn on USB debug
9. Root the phone, follow these steps:
- MTK Droid tools, after phone is read, press Root
- When prompted to create backup of ROM, press Yes (For the subsequent restoration of bla, bla... To make it now?)
- When prompted pack the backed up ROM, press Yes
- When Prompted choose between SuperSU or Superuser, choose SuperSU. SuperSU is still supported by develper, this is why.
- Click on IMEI/NVRAM and press backup... you may need that as well if something goes wrong.
Now you have you phone rooted and the original ROM zipped in the backup folder under MTK Droid Tools folder.
- Reboot the phone. You might have to root again but no need to save anything.
10. MTK Droid tools, after phone is read, go to the other tab: root, backup, recovery
11. If you wish, you can make another backup of your ROM with ROOT privileges this time... Press Backup and wait to complete.
12. Press button "To prepare blocks for Flashtool", select .md5 file from the last backup folder you made.
- Now you have the copy of the original software
13. Position radio buttton on the option: "To use boot from phone"
14. Press button "Recovery and Boot"
- When prompted "To make CWM recovery automatically?", press Yes
- When prompted to upload ony if phone is loaded, press Yes
- When prompted to "Install created recovery to phone?", press Yes
- when prompted "To reload phone in recovery to phone?", press Yes
15. You are now in recovery mode, to navigate up-down use Volume button, to choose/execute an item use power button.
16. Navigate to "wipe data/factory reset" then execute, on the next screen navigate to "Yes - ..." then choose it
17. Navigate to "whipe cache partition" then execute, on the next screen navigate to "Yes - ..." then choose it
18. Navigate to "install zip from sdcard" then execute, on the next screen navigate to "choose zip from sdcard"
19. Now you see content of SD Card, navigate to ROM file (update.zip) then execute, on the next screen navigate to "Yes - ..."
then choose it
20. Once finished GO back then reboot the phone
21. It will take a bit longer to load first time
22. To install the splash screen go to recovery mode again, choose to update from SD then confirm... same steps as for the ROM.
23. Open google play, login, a number of updates will show up, update all Google Play components
To get into recovery mode you have few options, i'll give one:
a. Turn off phone
b. Press and keep pressed Volume Up
c. Press and keep pressed Power button
d. Keep both pressed until splash screen shows up then release both
Now you may want to get rid of chinese stuff. To do so, folow these steps:
1. Power your phone
2. Open MTKdroidTools.exe
3. Connect Phone via USB to PC
4. In USB computer options choose to connect with option "Connect to PC software", this will turn on USB debug
5. After phone is loaded press Root (just to get privileges)
6. When prompted "Receive root privileges bla, bla...", choose yes
7. Press Super User... choose to user SuperSU
8. Press Build.Prop
9. Press Delete china... this will remove the only keyboard as well which is chinese so skip this step.
10. Press reboot
11. Now most of the chinese stuff is gone
12. Download and install:
- More locale or locale 2 if you want interface in a certain language
- Swiftkey to get a decent keyboard (disable chinese one)
- 3D Digital weather
- Anything else yo may want.
13. Use system optimiser to uninstall the rest of the Chinese apps
You are done... I have done this walkghrough while I was mooding my phone. Dont ask questions on errors as I have no idea. These
steps where collected while various forums for ready 3 days.
Hope someone will find useful... good luck.
Hi everyone, I recently bought a Xiaomi Mi box3c and was very disappointed with custom rom and the interface that it came with on it. So surfing the web there are a few tutorials on how to change it and I tried a few but they are not that great either, till finally someone patched the stock android TV Lean back Launcher for it, it took some tinkering but I got it working, this may not be the best way but this is how I did it form the start. This is not my work, I just followed instructions and I have gathered them here. As I am lazy Im not gonna provide pictures for every step but it’s pretty straight forward.
For using some the apps during the process you will need usb mouse cause not every apps supports Mibox remote configuration
As I am a new poster I am not allowed to post any links so change every dot word to an actual . for the links.
1. Turning on the Box and Changing to English
1.1 Download this apk provided by Xiaomi veterans on forum, it’s a shortcut to the stock android setting
drive dot google dot com/open?id=0B16bkj0QSkYnc0k2UUFTU05vSHM 1.2 copy the apk to a normal usb flash drive and connect to mibox and install the apk
1.3 Run it and now you can change the language as in any android device.
2. Downgrading Firmware
All of the root options available for this device are for the older firmware so you need to downgrade the device. (it’s much easier than it sounds.)
2.1 Download the original firmware for MDZ-16-AA from this link: (both are the same thing)
yadi dot sk/d/Yvr1jYflm6GZR androidfilehost dot com/?fid=745425885120695554 2.2 Extract the contents of the downloaded zip file to a formatted usb tick (Fat32). (There should be two files: xiaomi_update and update.zip)
2.3 Put the USB flash drive in your Mi Box and boot in recovery
(How to boot into recovery: Unplug power > press and "hold back + ok" button while plugging the power back in. The remote should be nearby and facing the box. Do not let go of the buttons until it booted in recovery. for some devices its "home + menu" button instead of the previous one.
2.4 the flashing should start and finish automatically. don’t connect the device to WIFI after this step until you have disabled the intelligent update.
(Credits to passerby on xiaomi.eu forums for the guide)
3. Rooting the device
I tried almost all of the rooting apps, none of them worked for me but I have seen people insisting that permroot works for them so I put the link for that, using it is pretty straight forward, download, install on device and try to root with it.
but in case that doesn’t work Kingoroot Windows app will definitely work. this is how to root with kingoroot. For this method you need a USB type A --> USB type A cable.
3.1 First download the kingoroot desktop app from their website
3.2 Install the app on your windows desktop
3.3 Go to your mibox device setting (mibox setting not android stock from part 1) and in Security setting and Enable USB/ADB debugging, device will restart for this setting to change.
3.4 connect your mibox to your desktop and wait for the device to be installed and recognized by windows. (If you are using windows 10 it will detect the device by itself)
3.5 Run the kingoroot app on the windows and let it detect the device, as soon as it detects the device root option will appear, click on root option it and wait
3.6 Kingoroot will try to install an app on your mibox, allow it and then this will continue and finish the rooting process.
3.7 Disable USB/ADB debugging, so you can connect USB Flash drives to the device again.
3.8 Check for the root stastus with rootchecker.
(Credits to passerby on xiaomi.eu forums for the guide)
4. How to flash TWRP to device
4.1 download the TWRP App from this link:
dl dot twrp dot me/twrpapp/me.twrp.twrpapp-18.apk 4.2 Download the android ROM and TWRP image together from this link:
goo dot gl/q5DGED password : Mibox2015 4.3 open the zip file and copy this image file to your USB Flash drive
MDZ-16-AA-AndroidTV-V1\TWRP-RECOVERY\twrp-mdz-16-aa.img
4.4 Connect the USB flash drive to the box and copy the image to device storage
4.3 Install the TWRP app on the device using the USB flash drive
4.4 Run it and select first two boxes.
4.5 Go to flash TWRP option and wait for app to ask permission from SU, grant permission.
4.6 Select TWRP flash and select flash from image. Select the image that you copied to device storage.
4.7 Boot into recovery (by this time you have root access and it’s better to boot to recovery with one of the reboot apps ex. Quick Reboot)
(Now you have TWRP, but the problem is every time you reboot the box, the stock rom overwrites the TWRP files and it goes back to Default recovery, to solve this we need to replace the Rom itself too)
5. Replacing the Rom
5.1 While still in TWRP page, make a small boot backup just so TWRP makes a folder in storage of your device.
5.2 Reboot the device from TWRP (reboot system)
5.3 Now using a File manager (I used X-plore) copy the Rom folder to the same backup folder that was created by TWRP in your storage.
Copy This folder:
MDZ-16-AA-AndroidTV-V1\TWRP\BACKUPS\11608V180037788\2014-12-31--18-01-42_6.9.7.949
To this folder: (Which is already should be there created by TWRP)
Internal Storage\TWRP\Backups\ (your device’s Serial number)\
5.4 Repeat steps 4.6 & 4.7 again to Flash TWRP again, after booting to TWRP go to restore and select file (2014-12-31--18-01-) to restore, swipe to restore and wait for 10-15 minutes
5.5 After restore is done don’t reboot, go back to TWRP main page, go to Wipe then advanced wipe, select Dalvik, Cache and Data to be wiped. After wipe is done reboot system
5.6 When android system boot is complete, go to setting down below and change the language to English and its done.
I hope it helps
Someone posted a tutorial on YouTube, the title of video is "MIBOX 3 MDZ-16-aa ROOT + Install Android TV English".
@[email protected], did you get Netflix to work on it?
dummyaccount said:
Someone posted a tutorial on YouTube, the title of video is "MIBOX 3 MDZ-16-aa ROOT + Install Android TV English".
@[email protected], did you get Netflix to work on it?
Click to expand...
Click to collapse
I tried all the steps.
No google play videos, no voice search and most of all no netflix.
=(
I hate the ****ing Chinese that sold me MDZ-16-aa saying it was the international version.
dont work password androidtv rom....... is Mibox2015?
mdz 16-AA
I faced the same issue.Wrong password.
Thanx for your post [email protected] I am going to use this method for my Mi box3.
As I am going to root any device for the first time, what precautions should I take
that I don't brick it?
Does the Microphone and and Ok button on Remote work normally after rooting by your method ?
Thx in advance....
[email protected] said:
Hi everyone, I recently bought a Xiaomi Mi box3c and was very disappointed with custom rom and the interface that it came with on it. So surfing the web there are a few tutorials on how to change it and I tried a few but they are not that great either, till finally someone patched the stock android TV Lean back Launcher for it, it took some tinkering but I got it working, this may not be the best way but this is how I did it form the start. This is not my work, I just followed instructions and I have gathered them here. As I am lazy Im not gonna provide pictures for every step but it’s pretty straight forward.
For using some the apps during the process you will need usb mouse cause not every apps supports Mibox remote configuration
As I am a new poster I am not allowed to post any links so change every dot word to an actual . for the links.
1. Turning on the Box and Changing to English
1.1 Download this apk provided by Xiaomi veterans on forum, it’s a shortcut to the stock android setting
drive dot google dot com/open?id=0B16bkj0QSkYnc0k2UUFTU05vSHM 1.2 copy the apk to a normal usb flash drive and connect to mibox and install the apk
1.3 Run it and now you can change the language as in any android device.
2. Downgrading Firmware
All of the root options available for this device are for the older firmware so you need to downgrade the device. (it’s much easier than it sounds.)
2.1 Download the original firmware for MDZ-16-AA from this link: (both are the same thing)
yadi dot sk/d/Yvr1jYflm6GZR androidfilehost dot com/?fid=745425885120695554 2.2 Extract the contents of the downloaded zip file to a formatted usb tick (Fat32). (There should be two files: xiaomi_update and update.zip)
2.3 Put the USB flash drive in your Mi Box and boot in recovery
(How to boot into recovery: Unplug power > press and "hold back + ok" button while plugging the power back in. The remote should be nearby and facing the box. Do not let go of the buttons until it booted in recovery. for some devices its "home + menu" button instead of the previous one.
2.4 the flashing should start and finish automatically. don’t connect the device to WIFI after this step until you have disabled the intelligent update.
(Credits to passerby on xiaomi.eu forums for the guide)
3. Rooting the device
I tried almost all of the rooting apps, none of them worked for me but I have seen people insisting that permroot works for them so I put the link for that, using it is pretty straight forward, download, install on device and try to root with it.
but in case that doesn’t work Kingoroot Windows app will definitely work. this is how to root with kingoroot. For this method you need a USB type A --> USB type A cable.
3.1 First download the kingoroot desktop app from their website
3.2 Install the app on your windows desktop
3.3 Go to your mibox device setting (mibox setting not android stock from part 1) and in Security setting and Enable USB/ADB debugging, device will restart for this setting to change.
3.4 connect your mibox to your desktop and wait for the device to be installed and recognized by windows. (If you are using windows 10 it will detect the device by itself)
3.5 Run the kingoroot app on the windows and let it detect the device, as soon as it detects the device root option will appear, click on root option it and wait
3.6 Kingoroot will try to install an app on your mibox, allow it and then this will continue and finish the rooting process.
3.7 Disable USB/ADB debugging, so you can connect USB Flash drives to the device again.
3.8 Check for the root stastus with rootchecker.
(Credits to passerby on xiaomi.eu forums for the guide)
4. How to flash TWRP to device
4.1 download the TWRP App from this link:
dl dot twrp dot me/twrpapp/me.twrp.twrpapp-18.apk 4.2 Download the android ROM and TWRP image together from this link:
goo dot gl/q5DGED password : Mibox2015 4.3 open the zip file and copy this image file to your USB Flash drive
MDZ-16-AA-AndroidTV-V1\TWRP-RECOVERY\twrp-mdz-16-aa.img
4.4 Connect the USB flash drive to the box and copy the image to device storage
4.3 Install the TWRP app on the device using the USB flash drive
4.4 Run it and select first two boxes.
4.5 Go to flash TWRP option and wait for app to ask permission from SU, grant permission.
4.6 Select TWRP flash and select flash from image. Select the image that you copied to device storage.
4.7 Boot into recovery (by this time you have root access and it’s better to boot to recovery with one of the reboot apps ex. Quick Reboot)
(Now you have TWRP, but the problem is every time you reboot the box, the stock rom overwrites the TWRP files and it goes back to Default recovery, to solve this we need to replace the Rom itself too)
5. Replacing the Rom
5.1 While still in TWRP page, make a small boot backup just so TWRP makes a folder in storage of your device.
5.2 Reboot the device from TWRP (reboot system)
5.3 Now using a File manager (I used X-plore) copy the Rom folder to the same backup folder that was created by TWRP in your storage.
Copy This folder:
MDZ-16-AA-AndroidTV-V1\TWRP\BACKUPS\11608V180037788\2014-12-31--18-01-42_6.9.7.949
To this folder: (Which is already should be there created by TWRP)
Internal Storage\TWRP\Backups\ (your device’s Serial number)\
5.4 Repeat steps 4.6 & 4.7 again to Flash TWRP again, after booting to TWRP go to restore and select file (2014-12-31--18-01-) to restore, swipe to restore and wait for 10-15 minutes
5.5 After restore is done don’t reboot, go back to TWRP main page, go to Wipe then advanced wipe, select Dalvik, Cache and Data to be wiped. After wipe is done reboot system
5.6 When android system boot is complete, go to setting down below and change the language to English and its done.
I hope it helps
Click to expand...
Click to collapse
I tried to downgrade my MDZ-16-AA device with the MiBOX3_jurassicpark_gitv_1.3.106.386 file ... but it brings it down only to 1. 3. 114 and not to 1. 3. 106.
Secondly I do not get "ADB Debugging" option. Hence I cannot connect my Mi Box to my laptop.
Can anyone help ?
the correct password is : '@'mibox2015
the quotes are only to avoid mention to xda user "mibo" in xda forum...u don't have to write it in...
mibox v1.5.1
I've troubles to root my mibox, I've the 1.5.1 version.
Can you help me, please ?
Mi box 3C v 1.5.1
Can it possible to do the same for version 1.5.1?
I have Mi box 3C v 1.5.1 and I can't even boot into recovery yet.
Add widevine drm in MDZ-16-AA
To complete your notice, I found a way to launch MyCanal and molotov.tv (not tested for netflix yet).
As you know these apps requires widevine drm.
First download
extractor 4.0 and Xiomi 3S official rom
Then extract update.zip and add in root folder of extractor: system.new.dat + system.transfert.list.file_context
Use Extractor.bat to uncompact system.new
On folder go on system\vendor and copy paste lib folder on USB key.
Does anybody know how to go to recovery mode?
HOLD Back + OK and Home + Option doesn't work for my MDZ-16-AA
the system has been automatically updated yesterday.. :crying:
Thank you so much, I got it installed.
Step 1 can be hard because of the chinese language therefor I used this link:
https://www dot cnx-software dot com/2016/04/12/how-to-change-language-to-english-and-install-apps-remotely-on-xiaomi-mi-box-3-enhanced/
at step 2 I made the mistake that I extracted the update.zip aswell. while I needed to keep it zipped.
I used the app RUFUS to make the usbdrive a FAT32 drive.
at step 3 Kingoroot worked for me, although I needed to restart several times to make the ADB debugging connection work.
at step 4 sending the TWRP files, was a bit of a hurdle. It wwas not possible for me to copt them from the USB stick with ES file manager to the device. I needed to use the USB cable to my computer (ADB off) password: "@mibox2015"
At point 5 I was not able to use my remote or keyboard, I needed to turn off ADB!
At the end allot works, but there is still some bugs:
- MIUI still present. eg. when connecting an usb stick you get a chinese menu. and you are able to get into the old system menu
- unable to get NETFLIX to work
- allot of bloatware, apps I can not disable or delete.
- im unable to disable search by microphone in the UI, which is not supported by the remote of the 16-AA
- im unable to edit the tiles in the homescreen to eg. hide the supersu, market etc. and to put PLEX of KODI more in front
Thanks!!!!
I have rooted my mibox 3c and installed TWRP app
I copied img to device and flash drive, but I can't choose any img in TWRP app...
any method to replace custom recovery?? THX
weiabroad said:
I have rooted my mibox 3c and installed TWRP app
I copied img to device and flash drive, but I can't choose any img in TWRP app...
any method to replace custom recovery?? THX
Click to expand...
Click to collapse
Go through each step carefully, if stuck be clear about what you have done
Sent from my A0001 using Tapatalk
Arquivo converter ROM chinesa para global 3C-16AA
Olá, gostaria dos arquivos para converter a ROM 3C-16AA, você tem whats para contato?
Hey,
Im' trying to get mycanal to work on my mibox MDZ-16-AA.
I copied the lib folder on my usb stick.
it's still not working, isn't any steps missing ?
Thanks.
Secure Check failed error while downgrading
I Got "secure check failed." error while downgrading. What did i do wrong ?
[email protected] said:
Hi everyone, I recently bought a Xiaomi Mi box3c and was very disappointed with custom rom and the interface that it came with on it. So surfing the web there are a few tutorials on how to change it and I tried a few but they are not that great either, till finally someone patched the stock android TV Lean back Launcher for it, it took some tinkering but I got it working, this may not be the best way but this is how I did it form the start. This is not my work, I just followed instructions and I have gathered them here. As I am lazy Im not gonna provide pictures for every step but it’s pretty straight forward.
For using some the apps during the process you will need usb mouse cause not every apps supports Mibox remote configuration
As I am a new poster I am not allowed to post any links so change every dot word to an actual . for the links.
1. Turning on the Box and Changing to English
1.1 Download this apk provided by Xiaomi veterans on forum, it’s a shortcut to the stock android setting
drive dot google dot com/open?id=0B16bkj0QSkYnc0k2UUFTU05vSHM 1.2 copy the apk to a normal usb flash drive and connect to mibox and install the apk
1.3 Run it and now you can change the language as in any android device.
2. Downgrading Firmware
All of the root options available for this device are for the older firmware so you need to downgrade the device. (it’s much easier than it sounds.)
2.1 Download the original firmware for MDZ-16-AA from this link: (both are the same thing)
yadi dot sk/d/Yvr1jYflm6GZR androidfilehost dot com/?fid=745425885120695554 2.2 Extract the contents of the downloaded zip file to a formatted usb tick (Fat32). (There should be two files: xiaomi_update and update.zip)
2.3 Put the USB flash drive in your Mi Box and boot in recovery
(How to boot into recovery: Unplug power > press and "hold back + ok" button while plugging the power back in. The remote should be nearby and facing the box. Do not let go of the buttons until it booted in recovery. for some devices its "home + menu" button instead of the previous one.
2.4 the flashing should start and finish automatically. don’t connect the device to WIFI after this step until you have disabled the intelligent update.
(Credits to passerby on xiaomi.eu forums for the guide)
3. Rooting the device
I tried almost all of the rooting apps, none of them worked for me but I have seen people insisting that permroot works for them so I put the link for that, using it is pretty straight forward, download, install on device and try to root with it.
but in case that doesn’t work Kingoroot Windows app will definitely work. this is how to root with kingoroot. For this method you need a USB type A --> USB type A cable.
3.1 First download the kingoroot desktop app from their website
3.2 Install the app on your windows desktop
3.3 Go to your mibox device setting (mibox setting not android stock from part 1) and in Security setting and Enable USB/ADB debugging, device will restart for this setting to change.
3.4 connect your mibox to your desktop and wait for the device to be installed and recognized by windows. (If you are using windows 10 it will detect the device by itself)
3.5 Run the kingoroot app on the windows and let it detect the device, as soon as it detects the device root option will appear, click on root option it and wait
3.6 Kingoroot will try to install an app on your mibox, allow it and then this will continue and finish the rooting process.
3.7 Disable USB/ADB debugging, so you can connect USB Flash drives to the device again.
3.8 Check for the root stastus with rootchecker.
(Credits to passerby on xiaomi.eu forums for the guide)
4. How to flash TWRP to device
4.1 download the TWRP App from this link:
dl dot twrp dot me/twrpapp/me.twrp.twrpapp-18.apk 4.2 Download the android ROM and TWRP image together from this link:
goo dot gl/q5DGED password : Mibox2015 4.3 open the zip file and copy this image file to your USB Flash drive
MDZ-16-AA-AndroidTV-V1\TWRP-RECOVERY\twrp-mdz-16-aa.img
4.4 Connect the USB flash drive to the box and copy the image to device storage
4.3 Install the TWRP app on the device using the USB flash drive
4.4 Run it and select first two boxes.
4.5 Go to flash TWRP option and wait for app to ask permission from SU, grant permission.
4.6 Select TWRP flash and select flash from image. Select the image that you copied to device storage.
4.7 Boot into recovery (by this time you have root access and it’s better to boot to recovery with one of the reboot apps ex. Quick Reboot)
(Now you have TWRP, but the problem is every time you reboot the box, the stock rom overwrites the TWRP files and it goes back to Default recovery, to solve this we need to replace the Rom itself too)
5. Replacing the Rom
5.1 While still in TWRP page, make a small boot backup just so TWRP makes a folder in storage of your device.
5.2 Reboot the device from TWRP (reboot system)
5.3 Now using a File manager (I used X-plore) copy the Rom folder to the same backup folder that was created by TWRP in your storage.
Copy This folder:
MDZ-16-AA-AndroidTV-V1\TWRP\BACKUPS\11608V180037788\2014-12-31--18-01-42_6.9.7.949
To this folder: (Which is already should be there created by TWRP)
Internal Storage\TWRP\Backups\ (your device’s Serial number)\
5.4 Repeat steps 4.6 & 4.7 again to Flash TWRP again, after booting to TWRP go to restore and select file (2014-12-31--18-01-) to restore, swipe to restore and wait for 10-15 minutes
5.5 After restore is done don’t reboot, go back to TWRP main page, go to Wipe then advanced wipe, select Dalvik, Cache and Data to be wiped. After wipe is done reboot system
5.6 When android system boot is complete, go to setting down below and change the language to English and its done.
I hope it helps
Click to expand...
Click to collapse
I successfully rooted my mibox 3c (MDZ-16-AA) and installed TWRP app and Android TV.
Now I want to go back to the Xiaomi Original Firmware (1.5.25). I tried to use TWRP and the Update.zip, but it did not work. How can I do it? Many thanks!
---------- Post added at 09:59 AM ---------- Previous post was at 09:53 AM ----------
I read from a Chinese forum that the 1.4.32 can also be rooted. As far as I know the Android TV is based on the 1.3.106. Does it make any sense to root the MDZ-16-AA with the firmware 1.4.32 and install the Android TV then?
Finally ported TWRP to the Medion Lifetab P10505 with working touch.
No guarantees are given, if you damage your tablet, all you do is on your own risk. I have the original ROM from Medion, if you need a full restore.
Please note that the TWRP recovery was not much tested and may be buggy. I didn't test with encryption or the restore process.
Please follow these steps:
1. Download all the files from Mega:
https://mega.nz/#F!pvQCQCxL!dfCHhGkliNSj-Wd3NcRV2ghttp://
2. Unpack all files into the same directory
3. If not done already, install the Intel Driver Package and reboot your PC
4. Unpack the ADB Tools into the directory
5. On your tablet go to your settings and enable USB debugging in the developer options. If you don't see the developer options menu under settings, goto about tablet and tip the build number seven times fast which will reveal the Developer options in the Settings.
6. Copy the file UPDATE-SuperSU.zip to your tablet (via USB or to memory card)
7. Switch off your tablet
8. Press and keep pressed the On/Off button and Volume Down button until you see the bootloader menu. Please press the buttons at the same time.
9. Now connect the table via USB cable to the PC.
10. Open a command window on your PC and change to the above created directory .
11. type the command: fastboot oem unlock (you can lock it again after the whole process if you want)
If this doesn't work goto the below section: Install recovery through flash
12. next type: fastboot flash recovery final_P10505_working_TWRP_3.0.2.0.img
13. Use the volume up or down button until Recovery mode is displayed.
14. Press the On/Off button shortly to start the new TWRP recovery menu. Please be patient until it fully loads. May take a couple of minutes.
15. Now choose install from the menu.
16. Proceed to the folder where you store the UPDATE-SuperSU.zip and select the file and swipe to install.
Note: If you forgot to copy the file to the tablet you can use the windows explorer to copy it to your tablet. There is a new device called Vi10 plus
(as mentioned it is only a port not build from source)
17. The Zip file should install
18. Use the back button to go back to the main menu of the recovery and select reboot and then system.
19. Now you have rooted the device and can create backups in the TWRP recovery.
20. To verify use any root checker tool from play store.
21. Feel free to hit the Thanks button
Install recovery through flash:
If there are any errors you can download the original ROM from Medion.de. You need then the Intel Platform Flash Tool Lite to install the ROM from Scratch (all your data will be lost).
When you run the flash tool, open the file from Medion.de and it will unpack the zip-file in the folder C:\Users\Your account name\.flasher\.download\p1050x-6.0-factory-v2.3
Proceed to the folder Just rename the file final_P10505_working_TWRP_3.0.2.0.img to recovery.img and replace the original file from Medion. Then hit the flash button.
Actually the Intel tool will perform the same command as above.
PS: I read that P10506 is hardware like the same as P10505, so it may work there as well, but no guarantees.
PPS: Credit go to the creators of the TWRP file for the Chuwi Vi10 plus (Highbook), which I don't know their names.
thank you for this, I used it on my P10506, the only difference was thead the command in section 12 has changed to:
fastboot flashing unlock
Cooool!
Did everything on my P10506.
Now waiting untill booting is finished...... CHECK!!
Testing with a root checker........ CHECK!!
That is great!
Thank you!
simplex3 said:
Did everything on my P10506.
Now waiting untill booting is finished...... CHECK!!
Testing with a root checker........ CHECK!!
That is great!
Thank you!
Click to expand...
Click to collapse
You're welcome,
but surely room for optimization of this tablet. On mine it happens after quite some that it becomes very laggy.
Hope yours is running better.
Bernie_W said:
You're welcome,
but surely room for optimization of this tablet. On mine it happens after quite some that it becomes very laggy.
Hope yours is running better.
Click to expand...
Click to collapse
Seems to work fine.
No lags. Okay, not more laggy then it was before rooting.
But now i'd like to flash a custom rom... Any suggestions?
Regards.
simplex3 said:
Seems to work fine.
No lags. Okay, not more laggy then it was before rooting.
But now i'd like to flash a custom rom... Any suggestions?
Regards.
Click to expand...
Click to collapse
I haven't seen any custom roms for this tablet, but I actually didn't look much. The problem is that it is nearly impossible without sources to create one.
any new mirrors available? mega zip file offline...
P10506
Thanks for the wonderful news! If anyone (Bernie?) could make the files / TWRP image available again, they'd make me and the previous poster even happier
Looking to root and TWRP my familys two P10506s - one still on 5.1 - should I update it to 7.1.1 (last available image from Medion) first?
Download Link
Somebody here who have the files available and can upload it again?
Would be great.
Thanks
Bye
Amy New version for P10506? My tablet Constantly crasing on original software
Asciola said:
P10506
Thanks for the wonderful news! If anyone (Bernie?) could make the files / TWRP image available again, they'd make me and the previous poster even happier
Looking to root and TWRP my familys two P10506s - one still on 5.1 - should I update it to 7.1.1 (last available image from Medion) first?
Click to expand...
Click to collapse
Maybe you can flash android x86.
1,Flash tw08a-87z8 bios using flashrom in ubuntu.
2,Push esc key to enter bios.
3,Install android ,linux or windows using usb/sd boot.
Some medion and onkyo tablets are compatible.
I have written more details on my wiki.
TA2C-74Z8 - SmileTabLabo
Onkyo TA2C-74Z8はODS株式会社製造のAndroidタブレット。スペック 型番 TA2C-74Z8 製造元 オーディーエス株式会社 CPU Intel Atom Z8350 G...
wiki3.jp
Maybe helpful to have some basic information about this great device in one posting:
Device Specs
https://www.mobosdata.com/phone/hisense-a5/
How to reflash Firmware directly from microSD (Tfmode)
Thanks to Anghirrim !!!
https://forum.xda-developers.com/showpost.php?p=82575517&postcount=21
Edl mode (in General)
Thanks to Anghirrim !!!
https://forum.xda-developers.com/showpost.php?p=82654769&postcount=79
Rooting for Firmware Version 6.09.06.00
Thanks to joygram !!!
https://forum.xda-developers.com/android/general/hisense-a5-root-gapps-customizer-t4097951
QFIL Firmware 6.03.02 for unbricking in Edl-Mode
Thanks to gowin132 !!!
https://drive.google.com/file/d/1LqcR6NVlSqL6gT6y1y1x9r58_LAKBBjd/view?usp=sharing
QFIL Firmware 6.09.06 for flashing in Edl-Mode
Thanks to gowin132 !!!
https://forum.xda-developers.com/showpost.php?p=82727173&postcount=8
Rom Download Links for flashing in TF-Mode (microSD)
6.09.06.00 Thanks to giuseppemag !!!
https://forum.xda-developers.com/showpost.php?p=82583733&postcount=28
https://drive.google.com/open?id=1JBzsFrtGtIXLYTPTMA2cc9spp_dxF_WX
Debloating help and blocking IP (Updated)
https://forum.xda-developers.com/showpost.php?p=82795057&postcount=4
Do you have an unlocked Bootloader? ( Hisense always locked!)
https://forum.xda-developers.com/showpost.php?p=82634399&postcount=117
How to enter hardware Edl mode
Thanks to joygram !!!
https://forum.xda-developers.com/android/general/hisense-a5-how-to-enter-hardware-edl-t4103929
There are a lot reviews about the device and a thread at MobileRead.
Unbricking in Detail
Unbricking the Device in Detail
Before you step forward I would recommend taking out the Sim-Card
stay offline until the device is debloated
Some general information:
Bricked, but you have an unlocked Boolader
just flash Image in fastboot or if available in twrp
*** All bootloaders of Hisense devices are locked and there's no way to unlock !!! ***
Bricked & you haven't got an unlocked Boolader
TF-Mode (microSD)
https://forum.xda-developers.com/showpost.php?p=82575517&postcount=21
download latest TF-Firmware i.e.
https://forum.xda-developers.com/showpost.php?p=82583733&postcount=28
how to enter TF Mode?
https://forum.xda-developers.com/showpost.php?p=82650955&postcount=72
shutdown the device
press both volume buttons and then power button together
release power button and wait 10s until the update screen comes up
alternative1
shutdown device
holding volume +- and power buttons together
alternative2
shutdown while holding volume +-
press+- buttons and then power button
release power button but holding +-
wait 10sec
release +- buttons
Hisense powered by Android
wait 10sec
press power button just short
If this above won't work, then the bootloader is damaged you will need to flash the Firmware in Edl-Mode with Qfil. This always works if not hardbricked!!! So relax
General Info about EDL Mode (You need to get a Qfil-Firmaware-Image)
https://forum.xda-developers.com/showpost.php?p=82654769&postcount=79
https://forum.hovatek.com/thread-21791.html
Files needed:
Edl-Mode Firmware files 6.03.02 for unbricking
https://drive.google.com/file/d/1LqcR6NVlSqL6gT6y1y1x9r58_LAKBBjd/view?usp=sharing
prog_emmc_firehose_8937_ddr_000bf0e1.mbn from joygram Root-package
attachement inside "RootKit R03"
https://forum.xda-developers.com/android/general/hisense-a5-root-gapps-customizer-t4097951
Qualcomm drivers i.e. 64bit for Windows 10
i.e.
https://www.getdroidtips.com/download-qualcomm-qdloader-hs-usb-driver/
actual Qpst software incl. Qfil
https://www.qpstflash.com/
Before installing drivers please read this
Obey these steps before installing unsigned drivers and prevent Sahara errors
https://forum.xda-developers.com/showpost.php?p=77229641
Installing Instructions details for drivers
https://forum.hovatek.com/thread-16965.html
Installing Qpst instructions details
https://forum.hovatek.com/thread-31475.html
Start Qfil from the startmenu (inside "Qpst")
check the setup Qfil before entering edl-mode
steps 1-4. from instructions here
https://forum.hovatek.com/thread-31475.html
-> then go back and tick "flat build"
-> select Programmer and browse
-> select the "prog_emmc_firehose_8937_ddr_000bf0e1.mbn"
Now it's time to enter the edl-mode with your smartphone
How to enter edl mode
a)Soft edl mode per adb
adb reboot edl
flush image with QFIL
b) )Soft edl mode per fastboot
fastboot oem edl
fastboot reboot-edl
fastboot reboot edl
(may not work for Hisense)
c)hard edl mode
https://www.oxygen-forensic.com/upl...s_based_on_Qualcomm_chipsets_via_EDL_mode.pdf
using a hardware cable (working 100% - preferred method!!!)
https://www.magnetforensics.com/blog/qualcomm-phone-edl-mode/
(working with Hisense A5)
by shortening the pins [not recommended!!!! Don't do this!!!!]
*** you need to open the device ***
https://forum.xda-developers.com/android/general/hisense-a5-how-to-enter-hardware-edl-t4103929
If you entered the edl-mode your Qfil screen should show
"Qualcomm HS-USB QDLoader 9008" (Com-Port)
like step 5 from here
https://forum.hovatek.com/thread-31475.html
Then Click Tools -> Partition Manager
step 9
https://forum.hovatek.com/thread-31475.html
confirm ok
step 10
https://forum.hovatek.com/thread-31475.html
select boot partition and right mouse click
manage Partition Data
we won't backup, we want to restore the boot-image
press Load Image and browse the boot.img from the edl-Firmware above, flash it and wait until it successful is flashed
if there's a Sahara error check again here
https://forum.xda-developers.com/showpost.php?p=77229641
Then flash recover.img and vbmeta.img
After that reboot your phone and it must boot the system.
Then Update in TF-mode to Firmware 6.09.06 (see above)
You successfully restored your bricked phone and updated the Firmware!
Thanks to joygram, Anghirrim, gowin132, giuseppemag
and all other sources of knowledge mentioned above!
Rooting your Smartphone Firmware 6.09.06
The Sim-Card still shouldn't be attached to the device
Files needed:
latest ADB-Drivers
https://forum.xda-developers.com/showthread.php?t=2588979
joygram Root-package for 6.09.06
attached files "RootKit R03"
https://forum.xda-developers.com/android/general/hisense-a5-root-gapps-customizer-t4097951
Magisk Manager latest apk
https://github.com/topjohnwu/Magisk/releases
open developer mode in system settings
search settings `kernel version' and go
tab 7 or more : developer options enabled
* enable usb debugging
enter developer mode in system settings -> "other settings"
change USB computer connection to Transfer files(MTP)
Install the adb-drivers
Start Qfil-Software in Windows
Enter Edl-Mode while connectd phone to USB
->adb devices
use adb command
-> adb reboot edl
In Qfil
* flush ROOT files with QFIL : QFIL_6.09.06
-> Select Build Type : Flat Build
-Y Select Programmer : select
prog_emmc_firehose_8937_ddr_000bf0e1.mbn
->LoadXML:
rawprogram_000bf0e1_joygram
-> Download
when complete please reboot the device.
After install in system
* magisk manager
MagiskManager-v7.5.1.apk
Finally you have root!
Thanks to joygram!!!
https://forum.xda-developers.com/android/general/hisense-a5-root-gapps-customizer-t4097951
Debloating the Device privacy friendly
You restored your Firmware and have the latest Chinese Firmware 6.09.06 without Google Playstore installed
The Sim-Card isn't attached to the device
You're offline, no WiFi
You're rooted with Magisk Manager(but the bootloader is locked)
General Information
There are many ways to debloat the device.
This is only a description how I did this.
It doesn't mean that it's working for you. Please be careful. I am not responsible if oyu brick your phone. If this happened you should easily unbrick it.
So read it carefully and always check if you need the programs or not.
I debloated all system programs which I don't need and install alternatives from F-Droid Store which just need user rights
i.e.
AfWall+ as a Firewall (Root)
Calculator (SimpleMobileTools)
Calendar (SimpleMobileTools)
Clock (SimpleMobileTools)
Contacts (SimpleMobileTools)
Conversations
Dialer (SimpleMobileTools)
Editor
Essential Launcher
F-Droid
FairEmail
Foss Weather
Gallery (SimpleMobileTools)
Net Monitor for checking Net-Traffic
Open Camera
OSMAnd+
PrivacyBrowser
QuickDic
beside that:
TitaniumBackup Donate (Root) Backup & Freezing System-Apps
Total Commander (Root) file manager
VocalizerEx2 TTS
https://forum.xda-developers.com/showthread.php?t=2566795
I debloated everything that the main features of a smartphone still works:
Phone using a Sim-Card (incl. LTE, depends on your region)
TextMessages (SMS)
Internet data
WiFi (2.4 MHz, no 5Ghz)
Bluetooth
GPS
Doing backups from all system files you want to debloat with Total Commander
create directories with permissions 755
i.e.
system/_keepsave/
system/_keepsave/system
system/_keepsave/system/app
system/_keepsave/system/preload
system/_keepsave/system/priv-app
system/_keepsave/system/vendor
system/_keepsave/system/vendor/app
system/_keepsave/system/vendor/overlay
Then backup all directories to the keepsave dirs
system/app
system/preload
system/priv-app
system/vendor
system/vendor/app
system/vendor/overlay
Then setup the system settings
I disabled everything I don't need (location only Gps, automatic System Updates/Accounts, App shadow,...)
setting up Afwall to your needs
disabling captive portal login with some alternative url
disabling ipv6 in Afwall if you don't need it
Then you can try freezing system apps with Titanium Backup
Or just delete all the bloat you don't need.
I deleted in TotalCommander
system/preload
system/vendor/app
system/vendor/overlay
in system/app are only:
Code:
/system/app/CertInstaller don't remove
/system/app/CtRoamingSettings don't remove / freeze & use only if roaming
/system/app/Eink_Settings don't remove / Settings Clearview per App!!!
/system/app/ExtShared don't remove
/system/app/HardwareDetection don't remove
/system/app/NetworkSelect don't remove
/system/app/QtiTelephonyService don't remove
/system/app/SimSettings don't remove
/system/app/Vision_AutoRunManager don't remove
/system/app/Vision_Bluetooth don't remove
/system/app/Vision_CalendarProvider don't remove
/system/app/Vision_WifiDetector don't remove
/system/app/WeatherWidget don't remove / just freeze / navigation bar flickering! com.hmct.clock.systemwidget
/system/app/WebViewGoogle don't remove
in system/priv-app are only:
Code:
/system/priv-app/CarrierConfig don't remove
/system/priv-app/com.qualcomm.location don't remove / GPS
/system/priv-app/DefaultContainerService don't remove
/system/priv-app/ExtServices don't remove
/system/priv-app/ExternalStorageProvider don't remove
/system/priv-app/FusedLocation don't remove /GPS
/system/priv-app/InputDevices don't remove
/system/priv-app/MmsService don't remove
/system/priv-app/MtpDocumentsProvider don't remove / MTP
/system/priv-app/ProxyHandler don't remove
/system/priv-app/QcomMediaProvider don't remove
/system/priv-app/SettingsIntelligence don't remove / settings needed
/system/priv-app/SettingsProvider don't remove
/system/priv-app/Shell don't remove
/system/priv-app/StatementService don't remove
/system/priv-app/StorageManager don't remove
/system/priv-app/TelephonyProvider don't remove
/system/priv-app/TeleService don't remove
/system/priv-app/Vision_CallSettings don't remove
/system/priv-app/Vision_ContactsProvider don't remove
/system/priv-app/Vision_DocumentsUI don't remove
/system/priv-app/Vision_DownloadProvider don't remove just freeze
/system/priv-app/Vision_DownloadProviderUi don't remove
/system/priv-app/Vision_MmsProvider don't remove
/system/priv-app/Vision_NetworkSetting don't remove
/system/priv-app/Vision_PackageInstaller don't remove
/system/priv-app/Vision_PermissionManager don't remove
/system/priv-app/Vision_RecentsService don't remove
/system/priv-app/Vision_ScreenOffGesture don't remove
/system/priv-app/Vision_Settings don't remove
/system/priv-app/Vision_SystemUI don't remove
/system/priv-app/Vision_Telecom don't remove
After successful debloating the system to your needs, test with Afwall log and Net Monitor if there are outgoing system apps calling home
if so freeze or delete them or let Afwall just block them.
This setup works 100% for my needs, but that doesn't mean it works in the same way for you. Please be careful. I am not responsible if oyu brick your phone. If this happened you should easily unbrick it (see above).
Have fun with a debloated chinese Firmware
For the A5C version, the chinese stock rom if someone wants it (first seed, so it will take a while until there are more seeders).
HLTE202N_L1657.6.01.04.B5.zip.torrent
Shared with Dropbox
www.dropbox.com
danielvelezbravo said:
For the A5C version, the chinese stock rom if someone wants it (first seed, so it will take a while until there are more seeders).
HLTE202N_L1657.6.01.04.B5.zip.torrent
Shared with Dropbox
www.dropbox.com
Click to expand...
Click to collapse
Hi, Daniel!
Do you have the chinese sotock rom for Hisense A5 Pro (not CC)? My cell model is HLTE203T and i never can't update...
carlo.z.du4rdo said:
Hi, Daniel!
Do you have the chinese sotock rom for Hisense A5 Pro (not CC)? My cell model is HLTE203T and i never can't update...
Click to expand...
Click to collapse
Ahhh... Nope. I only got my hands into the A5C stock as it is what i got.
Hi, I'm leaving a mirror link for all Hisense A5 stuff that may be helpful in the future when original links will be dead. As a bonus there are offline OTA zip files for L1657.6.10.04.00, L1657.6.11.01.00 and L1657.6.12.01.00. When Software update downloads OTA it saves in /data/media/
Remember that OTA updates need to go in order like L1657.6.09.06.00 -> L1657.6.10.04.00 -> L1657.6.11.01.00 -> L1657.6.12.01.00. DO NOT UPGRADE from L1657.6.09.06.00 to L1657.6.12.01.00 directly.
OTA manual install:
0. Prepare at least 2 GB SD card and format it as FAT32
1. Rename desired OTA file to update.zip
2. Copy update.zip to the root of the SD card and after that insert the card into the phone
3. Go into recovery mode on the phone (I used ADB for that, if you want you can use key combination) 4. Connect it to pc via ADB (I'm assuming that you enabled USB debugging in developer options after clicking on kernel version 8 times in phone info)
4. Run `adb devices` and make sure that you allowed debugging on the phone
5. Run `adb reboot recovery` to boot into recovery mode
6. You will see 2 options on the screen - Choose 1st one
7. Now you will see 3 options - Choose 3rd
8. Now there will be 2 options - Choose 1st
9. Phone should update and reboot
Mirrored content:
Rom and OTA:
Hisense_A5_L1657.6.03.02.00_Full_Backup.7z (Backup using QFIL, every partition, official with GAPPS, flash using QFIL)
Hisense_A5_HLTE202N_L1657.6.03.02.00.7z (for debricking)
Hisense_A5_LA592C(HLTE202N)_L1657.6.09.06.00_TFDownload_202004090105_user.zip
Hisense_A5_L1657.6.10.04.00_OTA.zip
Hisense_A5_L1657.6.11.01.00_OTA.zip
Hisense_A5_L1657.6.12.01.00_OTA.zip
Root tools:
Hisense_A5_customizer-R04.7z
Hisense_A5_customizer-R05-06.10.04.00.7z
Hisense_A5_L1657.6.12.01.00_Magisk22.1_Root_by_Sillage.7z
FireHose_HiSenseA5.mbn
Hisense_A5_debloat.txt
Hisense_A5_block_hisense.sh
Hisense_A5_EDL_PINS_1.jpg
Hisense_A5_EDL_PINS_2.jpg
Hisense_A5_boot_recovery_vbmeta_6.03.02.zip
LINK: https://mega.nz/folder/QkVXUDLS#LWYIHVvuiOFxxeZpWruTlg
.
@gowings23
@JLowe
Would be possible to share:
- Stock ROM 6.12 Full QFIL Backup
- EFS/QCN backup files
- TWRP recovery (if you managed to get one)
How I can install twrp and flash gsi rom on Doogee N20?
I found this but I'm doesnt know Russian: pda.ru/forum/index.php?showtopic=955032&st=1220#entry89836105 (I cant post URL because I'm new user, so I delete the "4" from "4pda")
Sorry for my bad English.
צבי זלצברג said:
How I can install twrp and flash gsi rom on Doogee N20?
I found this but I'm doesnt know Russian: pda.ru/forum/index.php?showtopic=955032&st=1220#entry89836105 (I cant post URL because I'm new user, so I delete the "4" from "4pda")
Click to expand...
Click to collapse
That's the Google translation:
A little instruction on how to get RooT. And so, everything that you do, as always, is at your own peril and risk! All data is erased when unlocked! Make BACKUP !!! Is always!!!! I. Unlocking Boorloder-a (required for flashing the phone and everything connected with it): 1. Go to settings -> system -> About phone -> Build number (7 clicks) (Congratulations !!!! You are a developer!) < - About phone -> For developers: Enable USB debugging and OEM unlocking. 2. We connect the phone to the computer and install the ADB usb driver (on the Internet), a connection request should appear on the phone, you need to allow it. 3. Extract files from the N20_utils.rar archive (10.87 MB) (preferably not very far, the root of the disk or the created folder N20 will be there). Go to the Unlocked Bootloader folder and run the bat file, the phone will reboot and display the request "unlock? Yes / no" rocker up - yes / rocker down - no. Naturally, you need to press the volume up, otherwise there were so many actions)) 4. Congratulations! Now, with each reboot, you will have an Orange state (5-second inscription), and the ability to do whatever you want with your phone. II. We sew! 1. For the lazy (who value their time). Download the SP Flash tool (Internet), from the N20_utils.rar archive (10.87 MB) select MT6763_Android_scatter and boot_magisk_20 files for the boot partition, lk_pached for lk, etc. you can even twrp instead of native recovery. Turn off the phone, connect it to the computer and click Download in the SP Flash programs. After the OK circle appears, disconnect and reconnect the cable (easier than a forced reboot). We turn on the phone and put the magisk manager (internet). Congratulations!!! You have a root and no Orange State label! 2. Who wants more and himself: phone to computer -> go to the Unlocked Bootloader folder -> run CMD -> write "fastboot flash recovery" put a space and move the TWRP file with the mouse to the window (fast path to the file) and press ENTER -> reboot the phone to fastboot. Congratulations!!! you have TWRP. Boot into TWRP, skip the encrypted DATE message, go to formatting and format the DATE. Go to mount and connect MTP. A phone will appear on my computer, we drop the files DisableForceEncryption_Treble (disable date encryption), orange_state_disabler_v0.3 (remove orange_state) and magisk.zip (internet) into the memory section. In TWRP, click install all this and rejoice! 3. Who has nothing to do at all: go to the forum thread Development and porting of GSI firmware (Post bullik01 # 71222655) and try what catches your eye. Not all are loaded, but .... (although we do not seem to have an A / B structure, but only "arm64 A / B" were launched) PS: look for additional information here on the forum and for brotherly devices UMiDIGI A5 Pro - Firmware ( Post Xakep1993 # 86772223) Attached files recovery-TWRP_3.3-20191015-1714.img (22.81 MB) DisableForceEncryption_Treble.zip (4.24 MB)
jwoegerbauer said:
That's the Google translation:
A little instruction on how to get RooT. And so, everything that you do, as always, is at your own peril and risk! All data is erased when unlocked! Make BACKUP !!! Is always!!!! I. Unlocking Boorloder-a (required for flashing the phone and everything connected with it): 1. Go to settings -> system -> About phone -> Build number (7 clicks) (Congratulations !!!! You are a developer!) < - About phone -> For developers: Enable USB debugging and OEM unlocking. 2. We connect the phone to the computer and install the ADB usb driver (on the Internet), a connection request should appear on the phone, you need to allow it. 3. Extract files from the N20_utils.rar archive (10.87 MB) (preferably not very far, the root of the disk or the created folder N20 will be there). Go to the Unlocked Bootloader folder and run the bat file, the phone will reboot and display the request "unlock? Yes / no" rocker up - yes / rocker down - no. Naturally, you need to press the volume up, otherwise there were so many actions)) 4. Congratulations! Now, with each reboot, you will have an Orange state (5-second inscription), and the ability to do whatever you want with your phone. II. We sew! 1. For the lazy (who value their time). Download the SP Flash tool (Internet), from the N20_utils.rar archive (10.87 MB) select MT6763_Android_scatter and boot_magisk_20 files for the boot partition, lk_pached for lk, etc. you can even twrp instead of native recovery. Turn off the phone, connect it to the computer and click Download in the SP Flash programs. After the OK circle appears, disconnect and reconnect the cable (easier than a forced reboot). We turn on the phone and put the magisk manager (internet). Congratulations!!! You have a root and no Orange State label! 2. Who wants more and himself: phone to computer -> go to the Unlocked Bootloader folder -> run CMD -> write "fastboot flash recovery" put a space and move the TWRP file with the mouse to the window (fast path to the file) and press ENTER -> reboot the phone to fastboot. Congratulations!!! you have TWRP. Boot into TWRP, skip the encrypted DATE message, go to formatting and format the DATE. Go to mount and connect MTP. A phone will appear on my computer, we drop the files DisableForceEncryption_Treble (disable date encryption), orange_state_disabler_v0.3 (remove orange_state) and magisk.zip (internet) into the memory section. In TWRP, click install all this and rejoice! 3. Who has nothing to do at all: go to the forum thread Development and porting of GSI firmware (Post bullik01 # 71222655) and try what catches your eye. Not all are loaded, but .... (although we do not seem to have an A / B structure, but only "arm64 A / B" were launched) PS: look for additional information here on the forum and for brotherly devices UMiDIGI A5 Pro - Firmware ( Post Xakep1993 # 86772223) Attached files recovery-TWRP_3.3-20191015-1714.img (22.81 MB) DisableForceEncryption_Treble.zip (4.24 MB)
Click to expand...
Click to collapse
Hi, were you by any chance able to get a copy of these files ,Please upload if posssible
The original links are broken and the internet seemed to wipe all traces out, I'm looking for the N20_utils and possibly the Disable force encryption one
Good day
Had the same problem, (English not so good but I know you'll understand). What I did was just installing Corvus OS rom, the 11th version. It's been quite a while since i installed it.
Tried Lineage 18.1 and adding the smallest gapps available, but everytime i get code error 1. I guess it was the twrp 3.3 version i used cause some roms requer the latest TWRP versions. The lineage is installing just right nd can reboot to system with no hiccups.
None of Android 12 gsi versions has ever been able to installed. Cause when i try to install, i get the error of "file too large for the target partition. Tried everything from the net to increase the system partition to at-least 3gig. No success.....
Is anyone who can help to install android 12 even beta version will be ok for my N20 Doogee??
Thanx
flairepathos.info said:
Hi, were you by any chance able to get a copy of these files ,Please upload if posssible
The original links are broken and the internet seemed to wipe all traces out, I'm looking for the N20_utils and possibly the Disable force encryption one
Click to expand...
Click to collapse
The file is in the forum. But to make your life easier here are the link.
https://drive.google.com/drive/folders/18B-srDVia_H4aDt7uvCDUxg2e4R5kVVY?usp=sharing The file is of type .exe and that extracts when you run on the pc, the problem is that I was suspicious about the virus so I threw the file in the total virus (if you don't know what it is, just search) and 6 programs pointed it out as malware but many others didn't find anything including karpersky and bit defender, there to make sure the files were there i renown they from .exe to .zip and I looked and the files really were there but as I don't want to take the risk I didn't extract and I didn't even try anything. The file that fix the encryption are inside doogee n20.exe, the guy said it will be in .exe and when you run it extracts the file in the C folder of the computer I recommend you to rename it from .exe to .zip because if the file have a virus you can screw your pc when running
Da-Judges said:
Good day
Had the same problem, (English not so good but I know you'll understand). What I did was just installing Corvus OS rom, the 11th version. It's been quite a while since i installed it.
Tried Lineage 18.1 and adding the smallest gapps available, but everytime i get code error 1. I guess it was the twrp 3.3 version i used cause some roms requer the latest TWRP versions. The lineage is installing just right nd can reboot to system with no hiccups.
None of Android 12 gsi versions has ever been able to installed. Cause when i try to install, i get the error of "file too large for the target partition. Tried everything from the net to increase the system partition to at-least 3gig. No success.....
Is anyone who can help to install android 12 even beta version will be ok for my N20 Doogee??
Thanx
Click to expand...
Click to collapse
you can use the pixel experience lite https://github.com/ponces/treble_build_pe/releases ( remenber the lite version, because is 2,5 gig) i try and instal in my phone and worked but i cant access my storage so i search and here are the solution https://forum.xda-developers.com/t/...loop-after-any-custom-rom-doogee-n20.4357313/ i dont try it but if you want here are the solution
flairepathos.info said:
Hi, were you by any chance able to get a copy of these files ,Please upload if posssible
The original links are broken and the internet seemed to wipe all traces out, I'm looking for the N20_utils and possibly the Disable force encryption one
Click to expand...
Click to collapse
Hi, did you find N20_utils?