hi
i recently rooted by phone successfully using highonanriod 5.1.1 method after it successfully working then after installing a new launcher from google play store my phone crashed (approx 37 hours after rooting) i tried smart switch update installation it rushes through all the way finishes then i got firmware updater unknown error happened a couple of times then i downloaded stock 5.1. rom of samsmobile and flashed that to my phone then is just stayed on Samsung first screen i restarted the phone via vol down plus and entered download menu
and it says
Odin mode
product name: SM-G920F
CURRENT BINARY : Samsung official
SYSTEM STATUS: CUSTOM
SECURE DOWNLOADED: Enabled
Reactivation lock: off
knox warranty void 1 (0x500)
RP SWREV: B: 3 K: 2 S:2
I have tried to flash twrp but get recovery is not seandriod enforcing and even when i flash stock i cant access recovery stock basically vol up +home+ pwr button doesn't do anything
i have tried flashing stock 5.1
i have prepacked everything with stock ap,bl,cp csc and even the pit file
my phone isn't seen by adb i run out of ideas and i tried everything i cant fix it if i cant fix this then i basically will have no phone i i used all my spare cash getting the s6 .
pls help
if i posted in the wrong forum pls move (i am noobie to xda)
techwax said:
pls help
if i posted in the wrong forum pls move (i am noobie to xda)
Click to expand...
Click to collapse
On Smart Switch use the option Emergency software recovery and initialization.
When you conect un odin what say?? You try to use odin for install stock room?
Related
Hello Guys, I have this Galaxy Mega SGH-M819N for MetroPCS. It enters to download mode but not recovery mode. The phones turns on but gets stuck on logo boot loops. I flashed the phone with three different firmware (M819NUVUBOH3 4.4.4, M819NUVUBNI5 4.4.4, and M819NUVUAMK7 4.2.2). The phone finishes the flash but after flash, the phone gets stuck on entering to "Recovery". It never enters to recovery and begins getting hot. I have to remove the battery and the phone starts boot looping again. The same thing happens when I use the Smart Switch emergency recovery. Here is what is says when the phone is in download mode:
ODIN MODE
PRODUCT NAME: SGH-M819N
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
BOOTLOADER AP SWREV: 4
WRITE PROTECTION: Enable
Help Please!!
Anybody? Any ideas?
Seems like one or more of the partitions is corrupted. You can try and flash a custom recovery, like TWRP, to see if maybe it will let you into recovery to do a factory reset.
es0tericcha0s said:
Seems like one or more of the partitions is corrupted. You can try and flash a custom recovery, like TWRP, to see if maybe it will let you into recovery to do a factory reset.
Click to expand...
Click to collapse
Hi there and thank you for your reply. I tried flashing a custom TWRP "twrp_2.8.5.0_metropcs". The phone accepts the file installation via Oding but the phone still gets stuck on "Recovery Booting...". The only difference is that below the Recovery Booting words is also the "Set Warranty BIT: Recovery" words too. It hangs there, then the boot loop starts.
Other than having Samsung take a look at it or having someone perform a JTAG service, I'm not sure there's much else you could do.
es0tericcha0s said:
Other than having Samsung take a look at it or having someone perform a JTAG service, I'm not sure there's much else you could do.
Click to expand...
Click to collapse
I actually do not think that Samsung would do anything about it since the "KNOX WARRANTY VOID: 0x1" is set. Somebody mentioned me about that JTAG service but I do not know who can perform that and if the phone is worthy.
need rom
pls i need a custom rom for my sgh m819nuvuboh3
so following the guide at https://forum.xda-developers.com/galaxy-j3-2017/development/recovery-twrp-3-1-1-1-samsung-galaxy-j3-t3709056 need help w/ root samsung j3 mission j327vpp , error when flashing twrp
as so far --- The latest version of Odin on your PC. → Link
TWRP Recovery for Galaxy J3. Download
SuperSU. → Download
Data Mount Fix for SuperSU. → Download
Install TWRP Recovery and Root Galaxy J3 2017
Extract the TWRP recovery file, it should have a file with .tar extension.
Install Odin on your PC launch it.
Now turn Off your Galaxy J3 and reboot it into download mode.
Press and Hold Volume Down + Power + Home button to boot your device into download mode.
Then, press Volume Up key to continue.
Now connect your device to PC running Odin.
Upon recognizing the device, Odin will show the message Added in the log box.
[ so i make it all the way to this step, it showed added and everything so far properly, but i noticed that odin will fail, instead of pass, and upon checking everything, the only thing i notice on my j327v is the frp lock : on in the download mode , so restart phone, it restarted fine, but i dont know where to start to try again , also i checked with my devel. options, and there is no option for the OEM unlocking, so please someone can help me get passed this, ive been working on just this phone for a time now, so i looked only place i would knoiw for help in this matter
thanks --- also if needed, [email protected] , another contact method
I am also looking to root my j3 mission sm-j327vpp so if there is a answer it would be greatly appreciated. Or if not possible to root let kno so I don't fiddle
This is how I unlocked the factory reset protection on verizons galaxy mission
If you want to unlock the factory reset protection there's no way to do it through the old-fashioned going into developer mode on this phone particularly you have to basically erase all your accounts off of it Google and your Samsung account and your little message will a pop up saying that you are factory reset protection is not enabled do you want to do this blah blah blah and then there it is unlocked once you reset it it won't be there when you redo your phone so this is the way to have your factory reset protection off when you go to root it...... and thank you very much..... ps... it's right there in the instruction booklet of the phone when you buy it guys come on
Thanks...I was unaware of the instruction booklet for I Em A Reel Old Gee and got mine off the meen streets of Mayne. Thanks A Gain
Hello Everyone,
The problem -
My phone is not starting. The Samsung Galaxy Edge 6 screen appears for a short while and it blacks out. Also, I cannot boot into the recovery that I had downloaded. However, I am able to go into the bootloader (using home buttom + Power + volumer low button). The info displayed on the bootloader is as follows -
ODIN MODE
Product Name - SM-G925I
Current Binary - Custom
System Status - Custom
Reactivation lock - OFF
Secure download - Enabled
Knox Warranty VOID - 1
AP SWREV- B:4, K:2, S:2
1) When I try flashing the stock firmware in the BL, I see the following message - sw rev check fail device 4 binary 3. I have tried flashing the following two firmwares -
G925IDVU3FQF7_G925IUUB3FQF1_G925IDVU3FQF2_HOME.tar.md5
G925IDVS3EQC1_G925ITFG3EPL1_G925IDVU3EPL1_HOME.tar.md5
2) When I try to re-flash TWRP, i see the following message - Recovery Is Not Seandroid Enforcing. it seems like TWRP flashing is complete, but the phone wont start/ neither go into recovery mode.
What I have done to create the problem -
1) Flashed TWRP using ODIN 3.10
2) Tried flashing lineage OS without realizing it is not for my model. - got errors like
DM verity signature not verified
3) Flashed CWM out of deperation -
n915s-cwm-recovery-6.0.5.1(1126)
4) Tried flashing the above two stock firmwares (only installed the AP file)
I really like my phone, I would highly appreciate if you can help me get it working. Happy to treat you however you please.
I flashed a custom rom with root using TWRP on my note 5 and it was working fine at first. Then installed Root Switcher so that i can log into snapchat because snapchat doesnt allow rooted phones.
The ROM i installed was KHONGLOI-NOUGAT-V5
Later the next day, i restarted my phone and it got stuck in the SAMSUNG logo, i tried force restarting my phone many times but still same thing. the phone started to heat so i went into TWRP and powered off my phone. And now when i try opening my phone it just opens TWRP everytime.. Was thinking of flashing stock rom using TWRP but my laptop doesnt recognize the phone.
I tried to flash stock rom using ODIN MODE but it keeps failing.. Or did i just chose the wrong PDA/CSC ?
Here's what shows in ODIN MODE...
PRODUCT NAME: SM-N920C
CA_ TYPE: CA_2
CURRENT BINARY: Custom
SYSTEM STATUS: Official
FAP LOCK: OFF
RP SWREV: B:5 K:0 S:1
And i was wondering if the RP SWREV is something to look at?
Is there a way to get my phone back?
Thanks in advance
Hello,
I just received my brand new Samsung Galaxy A40 (SM-A405FN) and I wanted to root it / install Custom Rom before anything else.
So I downloaded TWRP 3.4.0 for my phone and tryed flashing it. But that did not work, I was stuck in download mode. So I decided to reflash original firmware. During the flash, Odin stuck itself at "Boot" operation during more than 15min, so I decided to reboot the phone to retry (what a big mistake...).
And now, I can't access Bootloader mode anymore, I only have a blue screen with "An error has occured while updating the device software. Use Emergency Recovery function in smart switch PC software".
I downloaded Smart Switch and tried the emergency recovery, but no devices appears in the list. Same thing with Kies...
I'm lost, please tell me I did not completely brick my brand new phone :crying: ...
Thank's for help and sorry for bad english...
EDIT: Ok, the phone is not dead ! I finally got the download mode back with the correct timing for key strokes!
Can someone tell me why I can't boot after flashing this TWRP: https://twrp.me/samsung/samsunggalaxya40.html ?
I saw this post which tells to flash Kernel & VBMeta with the recovery but Odin can't flash .img files: https://forum.xda-developers.com/galaxy-a40/development/recovery-twrp-galaxy-a40-t4025587
solved?
Brick Problem solved yes, I still have not manage to install TWRP but at least I have been able to re-install stock firmware. Maybe I should do another thread for that problem
maybe you can try to enter the forum according to the device you are using.