Related
I am running santod's rooted Stock ICS rom, which has been running excellent, love it very much. Today I went to do a backup in recovery and noticedit will not boot into recovery. I am running the 4EXT recovery as suggested in the rom forum post. Nothing I do seems to be able to boot the recovery. I can't reboot into recovery from the 4EXT app. I boot the phone with the volume down key, and try to enter recovery from there. Still nothing. I get my initial boot logo, then screen goes black, then boot logo again and it proceeds to boot up normally. I have tried re-flashing the recovery from the 4EXT app, I even tried rom manages and using the latest clockwork mod recovery. Nothing gets me into recovery. Also have noticed my phone will not stay powered off when on the charger. If I power off, plug the charger in, after a few seconds phone powers itself on. Could it be related?
I followed the rom installation instructions to the letter.
Installed the 4EXT recovery.
Flashed the ICS radios.
Wiped all my partitions except my SD card.
Flashed rom and have enjoyed for weeks now.
Only other info I know to provide is I installed the debloated/deodexed rom
Did not flash the kernel as I didn't experience boot loops.
Thanks in advance for any assistance folks!
JM1084 said:
I am running santod's rooted Stock ICS rom, which has been running excellent, love it very much. Today I went to do a backup in recovery and noticedit will not boot into recovery. I am running the 4EXT recovery as suggested in the rom forum post. Nothing I do seems to be able to boot the recovery. I can't reboot into recovery from the 4EXT app. I boot the phone with the volume down key, and try to enter recovery from there. Still nothing. I get my initial boot logo, then screen goes black, then boot logo again and it proceeds to boot up normally. I have tried re-flashing the recovery from the 4EXT app, I even tried rom manages and using the latest clockwork mod recovery. Nothing gets me into recovery. Also have noticed my phone will not stay powered off when on the charger. If I power off, plug the charger in, after a few seconds phone powers itself on. Could it be related?
I followed the rom installation instructions to the letter.
Installed the 4EXT recovery.
Flashed the ICS radios.
Wiped all my partitions except my SD card.
Flashed rom and have enjoyed for weeks now.
Only other info I know to provide is I installed the debloated/deodexed rom
Did not flash the kernel as I didn't experience boot loops.
Thanks in advance for any assistance folks!
Click to expand...
Click to collapse
Did you rename or remove the Radio file from the sd card as suggested in the OP of the rom thread?
It will not let you get into Recovery if there is a PG05IMG.zip present on the root of the sd card.
If that's not the case, reflash 4ext from within the Recovery control app.
Just installing the app doesn't install the Recovery.
You must also install the actual Recovery from within the app if you haven't.
santod040 said:
Did you rename or remove the Radio file from the sd card as suggested in the OP of the rom thread?
It will not let you get into Recovery if there is a PG05IMG.zip present on the root of the sd card.
If that's not the case, reflash 4ext from within the Recovery control app.
Just installing the app doesn't install the Recovery.
You must also install the actual Recovery from within the app if you haven't.
Click to expand...
Click to collapse
Yeah, there is no PG05IMG.zip in the sd card root. Also I have tried reinstalling the recovery from the 4EXT recovery control app.
Current verson of recovery installed is 4EXT Recovery Touch v1.0.0.5 RC8.
Tried reflashing that, and also the RC9 test build that is out right now.
Still no go on getting into the recovery.
Thanks.
When you do the volume down and power option with the device off, you need to first press the volume down and then while holding that, then press and also hold the power button, you should feel it vibrate, keeeeeep holding them down, do not let go.
Wait until you see what should be a white hboot screen with menu options, then you may let go.
If you hold power first or don't hold them both down long enough, it will just try to boot normally.
Not that that would explain why you can't get there from within Recovery Control app.
What is your hboot version and how did you root your device?
santod040 said:
When you do the volume down and power option with the device off, you need to first press the volume down and then while holding that, then press and also hold the power button, you should feel it vibrate, keeeeeep holding them down, do not let go.
Wait until you see what should be a white hboot screen with menu options, then you may let go.
If you hold power first or don't hold them both down long enough, it will just try to boot normally.
Not that that would explain why you can't get there from within Recovery Control app.
What is your hboot version and how did you root your device?
Click to expand...
Click to collapse
It was rooted using the Revolutionary method, did it a year or more ago.
Hboot version is 6.04.1002
When I try to go to recovery from the hboot screen it does the same, vibrate, white HTC screen, black screen, vibrate, white HTC screen, normal boot. No recovery.
Is there any other method of getting into recovery or re-flashing the recovery?
JM1084 said:
It was rooted using the Revolutionary method, did it a year or more ago.
Hboot version is 6.04.1002
When I try to go to recovery from the hboot screen it does the same, vibrate, white HTC screen, black screen, vibrate, white HTC screen, normal boot. No recovery.
Is there any other method of getting into recovery or re-flashing the recovery?
Click to expand...
Click to collapse
Yes, you can flash Recovery images from hboot, just like you flash a radio.
With it named PG05IMG.zip and placed on the root of the sd card.
HERE is one you can try.
If that doesn't work, I may have something you can try from fastboot to clear the Recovery cache, and maybe that will resolve the issue.
I have only seen one other user have this occur and his device simply ended up getting replaced because he wasn't able to mount to usb for doing fastboot commands either.
santod040 said:
Yes, you can flash Recovery images from hboot, just like you flash a radio.
With it named PG05IMG.zip and placed on the root of the sd card.
HERE is one you can try.
If that doesn't work, I may have something you can try from fastboot to clear the Recovery cache, and maybe that will resolve the issue.
I have only seen one other user have this occur and his device simply ended up getting replaced because he wasn't able to mount to usb for doing fastboot commands either.
Click to expand...
Click to collapse
Still no go flashing that recovery in hboot. What is the process of clearing recovery cache?
On a side note, in talking to my father, his bolt seems to have the same issue. We both were rooted with the same method, and I believe we have the same hboot version. Only difference is he flashed the rom using clockwork recovery.
Edit: I confirmed his hboot is 6.04.1002. same as mine
JM1084 said:
Still no go flashing that recovery in hboot. What is the process of clearing recovery cache?
On a side note, in talking to my father, his bolt seems to have the same issue. We both were rooted with the same method, and I believe we have the same hboot version. Only difference is he flashed the rom using clockwork recovery.
Click to expand...
Click to collapse
Well, I've got several Bolts here, and a couple of them have that same hboot and were used to test the stock roms with.
So I do not think it's a root or hboot issue, but I do not know what the issue would be other then corrupt Recovery cache.
To try and fix it by clearing the cache, do the following:
Download the erasecache.zip file from www.4ext.net/erasecache.zip
First boot your device into bootloader while connected via usb.
If it reads "fastboot usb" you are already in fastboot mode.
If it reads "hboot usb" then select "fastboot" in the bootloader menu.
Extract the file anywhere on your computer, and then start the file erase_cache.cmd with
elevated rights (right click erase_cache.cmd and select to run as administrator)
Watch for any error messages and tell me the results please.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above method fails, try this way:
This requires a little adb or command line knowledge(not much) and the appropriate files on your system.
Please boot into bootloader -> fastboot mode
and then issue the following fastboot command:
fastboot erase cache
afterwards boot recovery from the bootloader menu and enter the
wipe menu and format cache
santod040 said:
Well, I've got several Bolts here, and a couple of them have that same hboot and were used to test the stock roms with.
So I do not think it's a root or hboot issue, but I do not know what the issue would be other then corrupt Recovery cache.
To try and fix it by clearing the cache, do the following:
Download the erasecache.zip file from www.4ext.net/erasecache.zip
First boot your device into bootloader while connected via usb.
If it reads "fastboot usb" you are already in fastboot mode.
If it reads "hboot usb" then select "fastboot" in the bootloader menu.
Extract the file anywhere on your computer, and then start the file erase_cache.cmd with
elevated rights (right click erase_cache.cmd and select to run as administrator)
Watch for any error messages and tell me the results please.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above method fails, try this way:
This requires a little adb or command line knowledge(not much) and the appropriate files on your system.
Please boot into bootloader -> fastboot mode
and then issue the following fastboot command:
fastboot erase cache
afterwards boot recovery from the bootloader menu and enter the
wipe menu and format cache
Click to expand...
Click to collapse
Alrighty, I will give that a shot. I am at work right now and am about to head out of town so I will be unable to try it until sunday. I'll post the results here asap. Thanks again!
Same ROM, same problem,I even tried flashing a different recovery. Rooted using really old one click method a month after thunderbolt release.
Sent from my HTC Thunderbolt
zomgalama said:
Same ROM, same problem,I even tried flashing a different recovery. Rooted using really old one click method a month after thunderbolt release.
Sent from my HTC Thunderbolt
Click to expand...
Click to collapse
What is your h boot version?
Sent from my ADR6400L using Tapatalk 2
santod040 said:
Well, I've got several Bolts here, and a couple of them have that same hboot and were used to test the stock roms with.
So I do not think it's a root or hboot issue, but I do not know what the issue would be other then corrupt Recovery cache.
To try and fix it by clearing the cache, do the following:
Download the erasecache.zip file from www.4ext.net/erasecache.zip
First boot your device into bootloader while connected via usb.
If it reads "fastboot usb" you are already in fastboot mode.
If it reads "hboot usb" then select "fastboot" in the bootloader menu.
Extract the file anywhere on your computer, and then start the file erase_cache.cmd with
elevated rights (right click erase_cache.cmd and select to run as administrator)
Watch for any error messages and tell me the results please.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above method fails, try this way:
This requires a little adb or command line knowledge(not much) and the appropriate files on your system.
Please boot into bootloader -> fastboot mode
and then issue the following fastboot command:
fastboot erase cache
afterwards boot recovery from the bootloader menu and enter the
wipe menu and format cache
Click to expand...
Click to collapse
No Go, my tbolt will not mount in Win7, it just says the device has malfunctioned. Rebooting into the bootloader with USB in will not show anything in Windows, even in fastboot. It makes the device connection sound but no devices show up. Running the CMD file in the zip you linked does nothing, I'm at 10 minutes now where it just says "Waiting for device". Is my device just done for?
JM1084 said:
It was rooted using the Revolutionary method, did it a year or more ago.
Hboot version is 6.04.1002
When I try to go to recovery from the hboot screen it does the same, vibrate, white HTC screen, black screen, vibrate, white HTC screen, normal boot. No recovery.
Is there any other method of getting into recovery or re-flashing the recovery?
Click to expand...
Click to collapse
I think I had a similar problem once. Boot back into your hboot screen. Then select "factory reset". If you have a 3rd party recovery installed, like it sound like you have (4ext, right?), it will boot you to recovery so you can administer the reset yourself (it doesn't actually wipe anything, just brings you to your recovery's home screen).
Let me know how it goes.
coltspackers said:
I think I had a similar problem once. Boot back into your hboot screen. Then select "factory reset". If you have a 3rd party recovery installed, like it sound like you have (4ext, right?), it will boot you to recovery so you can administer the reset yourself (it doesn't actually wipe anything, just brings you to your recovery's home screen).
Let me know how it goes.
Click to expand...
Click to collapse
Thanks for the info, but this didn't work either. I'm also on 6.04.1002 and rooted mine a week after the T-Bolt shipped manually via adb.
This happened about a month ago also, and I thought it was ext4 but managed to get an older TWRP recovery to work after working on it for about a day and a half without a working phone. At least I have a working phone at this point.
Same ROM, same recovery (4ext), same problem. Rooted by adb a month after launch, hboot 6.04.1002
allo_87 said:
Same ROM, same recovery (4ext), same problem. Rooted by adb a month after launch, hboot 6.04.1002
Click to expand...
Click to collapse
Might be wise to bring it to Max's attention.
He makes the Recovery that is disappearing and may have suggestions or ideas on how to prevent this in the future.
I have flashed every rom I have ever posted at least once.
Most of them, may times and have yet to run into this issue.
I have had Recovery become corrupted once or twice quite some time back and not be able to get into it.
But it was easily fixed by reinstalling/reflashing a recovery.
I guess what I'm saying, is if there is a common issue occuring on our device with some ICS users and his Recovery, he should know about it.
Here's how to contact him: LINK
Hopefully he can help or look into the root of the issue, since I know he has had a few users with this same issue in the past.
santod040 said:
Might be wise to bring it to Max's attention.
He makes the Recovery that is disappearing and may have suggestions or ideas on how to prevent this in the future.
I have flashed every rom I have ever posted at least once.
Most of them, may times and have yet to run into this issue.
I have had Recovery become corrupted once or twice quite some time back and not be able to get into it.
But it was easily fixed by reinstalling/reflashing a recovery.
I guess what I'm saying, is if there is a common issue occuring on our device with some ICS users and his Recovery, he should know about it.
Here's how to contact him: LINK
Hopefully he can help or look into the root of the issue, since I know he has had a few users with this same issue in the past.
Click to expand...
Click to collapse
Excellent advice, thanks man.
Sent from my ADR6400L using Tapatalk 2
My thunderbolt's recovery spin mysteriously started working again yesterday, not sure why.
Doesn't matter though since I switched carriers now:/
Sent from my Sprint LG Optimus G
Still nothing for me. Worse yet is the fact that I can't adb because my usb has not worked properly since "the soup incident"
Sent from my ADR6400L using Tapatalk 2
santod040 said:
Might be wise to bring it to Max's attention.
He makes the Recovery that is disappearing and may have suggestions or ideas on how to prevent this in the future.
I have flashed every rom I have ever posted at least once.
Most of them, may times and have yet to run into this issue.
I have had Recovery become corrupted once or twice quite some time back and not be able to get into it.
But it was easily fixed by reinstalling/reflashing a recovery.
I guess what I'm saying, is if there is a common issue occuring on our device with some ICS users and his Recovery, he should know about it.
Here's how to contact him: LINK
Hopefully he can help or look into the root of the issue, since I know he has had a few users with this same issue in the past.
Click to expand...
Click to collapse
After going over the issue with Max and trying several fixes he suggested (he even made me an app that would format my cache), it seems I either need to obtain an RUU and flash the stock software/recovery back on and re-root or try flashing an updated hboot that already has s-off. The thinking is that it is my hboot that is causing the issue. Does anyone know what files I need? I have a couple of things to try at home to see if I can get my usb working again, if not, anything I do will have to be a flashable zip from the bootloader. Thanks!
This is long, but it's nice for noobs because it's detailed. It's honestly kind of fun, I promise. I'm assuming you have WINDOWS. This is based off of the guide by torxx!. It's modified because some of the info is outdated (you don't have to flash the boot.mg separately, for example). If you are NOT a noob you can just look at the "overview" for each step.
UNLOCKING YOUR DEVICE WILL WIPE YOUR DEVICE. THIS IS A SECURITY FEATURE. BACKUP FIRST.
Part 1- gaining unlock token
Overview: go to htcdev.com and unlock bootloader
Be sure you've turned off fast boot option in power menu; usb debugging should be on (settings -> developer options).
Go to http://www.htc.com/www/software/htc-sync-manager/[1] and install HTC SYNC. Alternatively, if you know what you're doing, you can install these drivers:
x86 http://www.mediafire.com/?qabo1tue2v1ky75 x64 http://www.mediafire.com/?8dl8s3l9mr6ggr9
Go on http://www.htcdev.com[4] and create yourself an account on HTCDEV.
Download these adb/fastboot files: http://d-h.st/RvD
Make a new folder anywhere. We'll use C:/fastboot as an example.
Extract the zip downloaded to the new folder
Go Here http://www.htcdev.com/bootloader/[6] and select "All Other Supported Models" and "then begin unlock bootloader" (check the boxes, click proceed, all that good stuff). YOU CAN IGNORE THE DIRECTIONS THAT THEY TELL YOU (and follow this guide instead).
Power off your phone. Power your phone on by holding power and volume down.
Highlight 'Fastboot' the volume buttons then press power to "select".
Plug your phone into your PC and open a Command Prompt. (windows XP - Click Start > Run > type CMD in box then press OK; Windows 7 - Click Start > type CMD in search box then press Enter) Change directory to your folder where we put fastboot files by typing cd c:\fastboot for example.*
*Alternatively, you can just hold down shift and right click in the folder and select "open command window here". Neat huh?
Type this into your command prompt window: fastboot oem get_identifier_token
Select & copy the text as per step 9 on the HTCDev website
Paste your identifier token into the box at the bottom and submit
You Will Very Shortly Receive an email from HTCDev with a link to the second part of the instructions and your "Unlock_code.bin" attached
Download the "Unlock_code.bin" from the email and save it to the same folder that we extracted fastboot files
Type this into your command prompt window: fastboot flash unlocktoken Unlock_code.bin
The Display Will change on your phone, press Vol+ to accept and power to confirm.
Part 2
Overview: flash your recovery. Boot into recovery. Turn phone off if it boots into OS. Boot into back into recovery. You're done!
Download a recovery:
TWRP (the one I use): http://forum.xda-developers.com/showthread.php?t=2173870
CWM 2: http://forum.xda-developers.com/showthread.php?t=2172979
CWM: http://forum.xda-developers.com/showthread.php?t=2173863
Place the Recovery file to the folder where the fastboot.exe is.
Same thing as above- boot (volume down + power) into the bootloader and highlight 'Fastboot' the volume buttons then press power to "select".
Do the same thing as with the command prompt above. This time, however, you'll be typing:
fastboot flash recovery "name_of_the_recovery.img"
For example:
fastboot flash recovery openrecovery-twrp-2.5.0.0-m7.img
then type:
fastboot erase cache
From the menu, boot into recovery (use volume to move up and down, power to select). The phone might boot to the OS instead of recovery, don't worry!
Turn off phone then turn on (while holding volume down) to boot back into the bootloader.
TAMPERED shows up, boot into recovery and now your recovery should be working!
Part 3- obtaining root
Overview: flash a super tool
Download a super user tool for root:
SuperSU (I use this one): http://forum.xda-developers.com/showthread.php?t=1538053
SuperUser: http://download.clockworkmod.com/superuser/superuser.zip
Alternatively, download this: http://forum.xda-developers.com/showthread.php?t=2252959. This is a stock rooted rom for ATT. If you download and flash this instead of the super user tool, you're done. (This rom includes super user) Or you can download a custom rom such as this one: http://forum.xda-developers.com/showthread.php?t=2183023
Turn on your phone again (and disable usb debugging) and connect to computer, copy the .zip super user tool to a location you remember ON the phone.
Flash it with the Recovery: Power off your device and then hold the VOL DOWN + Power to boot into the Bootloader Navigate with VOL and Power to Recovery Now flash the .zip:
- install zip from sdcard
- choose zip from sdcard
- select the downloaded SuperSU/SuperUser zip file and flash it
- Reboot now
You're not out of the woods yet! The stock kernel is system write protected, so you still can't modify it (changes won't "stick"). You'll have to flash a custom rom or a kernel if you want stock instead.
I recommend these kernels: http://forum.xda-developers.com/showthread.php?t=2255900 or http://forum.xda-developers.com/showthread.php?t=2233665&highlight=menu
Download it.
Installing custom rom/kernel ("flashing a rom")
Overview: Download Rom, boot into recovery and wipe and then flash.
According to Shenye, even though your device is s-on, you can still flash boot now. So just do this:
Turn on your phone again (and disable usb debugging) and connect to computer, copy the .zip kernel/cutom rom to a location you remember ON the phone.
Flash it with the Recovery: Power off your device and then hold the VOL DOWN + Power to boot into the Bootloader Navigate with VOL and Power to Recovery Now flash the .zip:
- install zip from sdcard
- choose zip from sdcard
- select the downloaded SuperSU/SuperUser zip file and flash it
- Reboot now
I feel like this title should be changed to clarify that it's unlocking the bootloader, not the SIM lock.
Just wanted to say this tutorial was 100% dead on and what I used to unlock bootloader and root/rom my One.
Oddity - Did everything, I've got root but I -AM- out of the woods. Was installing bulletproof mod through recovery but it kept failing due to missing a MD5 file or something -- Trying to work that out through that thread atm but anyway, rebooted the phone a couple of times now and I still have root, Tit back up works OR are we talking about things like CPU clocking won't work since it can't rewrite?
Sticking this.
Excellent tutorial. One thing to add:
If you flash the TWRP recovery you link to, after TWRP boots for the first time, if you reboot into System, TWRP will offer to install SuperSU for you; no need to find another to flash. Once the system reboots, you can launch the GUI installer to finish the SU install (it will boot into TWRP and back one more time to do the actual flash).
Does anyone know if this will work on the Rogers HTC One?
Thank you. Followed this last night. Worked flawlessly. The only thing that threw me was rebooting into recovery. It took maybe 3 or 4 reboots for it to say "TAMPERED" at the top. When it didn't say tampered, it would not boot to recovery.
TELUS?
DannySmurf said:
Excellent tutorial. One thing to add:
If you flash the TWRP recovery you link to, after TWRP boots for the first time, if you reboot into System, TWRP will offer to install SuperSU for you; no need to find another to flash. Once the system reboots, you can launch the GUI installer to finish the SU install (it will boot into TWRP and back one more time to do the actual flash).
Click to expand...
Click to collapse
Did you happen do run this tutorial on a TELUS device?
Viceroy_N said:
Does anyone know if this will work on the Rogers HTC One?
Click to expand...
Click to collapse
Yes it does. I have a Rogers phone, and it worked perfectly.
richnanaimo said:
Did you happen do run this tutorial on a TELUS device?
Click to expand...
Click to collapse
No, I have a Rogers device. But the procedure should not be any different.
followed step by step and got an error that says submitted token wrong length
I'm on ubuntu 13.04 and I get stuck at getting the token. I type in fastboot oem get unlock_identifier_token and it says waiting for device. Tried it with sudo and it says error and sudo ./fastboot and it says no such command.
Sent from my HTC One using xda app-developers app
Having a really odd problem. I flash the twrp recovery per instructions. I try to reboot to recovery and it seems to try and then, blam, the att boot.
I have tried this from the bootloader, selecting Recovery, as well as from a booted stated using "adb reboot recovery".
Any hints for me? I originally had a silver One and today got my Black One replacement,. Had no issues on the original one. Hmm. Guess I will try CWM.
FYI: Yes I unlocked the bootloader and it says Unlocked in there
-I also notice that I seem to go right into fastboot, when I boot the bootloader. Now, I believe that is normal if you have the usb cable attached, but this happens regardless.
-flashed stock recovery back and can get into it. trying twrp again, renaming the file to "recovery.img" just because...and it worked on that stock recovery file
-Also, very hard to get into bootloader from powered off state. I may flash RUU_M7_UL_JB_50_Cingular and see if it helps me.
OK, maybe it is the phone or ATT has done something screwy on the latest. I can not even get the RUU install to pass inspection. Wants me to check the connection. I know all my stuff is in order, as I did this all on the previous one. grrr
-Just noticed mine does say Unlocked but it does not say Tampered.
-Crazy. I decided to get a new Unlock token and redo the unlock with it. Now, the bootloader finally says Tampered and I got into TWRP. I have no idea why, since I would think that if the original Unlock token was incorrect, it would not have unlocked the phone.
So, rather than providing worthwhile information for anyone else having problems, I think this post is probably deletable and that is fine by me should the powers so decide.
How would one go back to locking the device for a return?!?
Sent from my Nexus 4 using xda premium
tacotino said:
How would one go back to locking the device for a return?!?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
fastboot oem lock
but, it will say relocked. nobody cares or seems to check. also, it will say tampered until you restore a stock ruu to flash. I used RUU_M7_UL_JB_50_Cingular.exe for mine when switching from silver to black. it is the right one for att. sorry, don't have the link to the download anymore.
great writeup! quick comment though, just helped my brother unlock his phone. i had a similar issue to @Barsky above so I decided to try to reflash the recovery. The first time I used the line fastboot erase cache after flashing the recovery and I think that's what caused it to not boot into recovery. The second time I flashed TWRP, I didn't enter that line and voila it worked on the first try!
can anyone post a mirror of the dev host files? devhost seems to be down.
nice...
help please
I seem to be stuck in recovery after installing super su/ rom. I messed up the order and did the rom then su. Any ideas on how I can get it to boot? I tried installing clean rom 2.5 and used the su file i found here ----> http://www.teamandroid.com/2013/03/17/root-htc-one-supersu-android-41-jelly-bean-tutorial/2/
any help is greatly appreciated... I just want my phone back
---------- Post added at 09:44 AM ---------- Previous post was at 09:36 AM ----------
also, i did hit factory reset under bootloader/fastboot screen (where it says tampered/unlocked),
mbroch89 said:
I seem to be stuck in recovery after installing super su/ rom. I messed up the order and did the rom then su. Any ideas on how I can get it to boot? I tried installing clean rom 2.5 and used the su file i found here ----> http://www.teamandroid.com/2013/03/17/root-htc-one-supersu-android-41-jelly-bean-tutorial/2/
any help is greatly appreciated... I just want my phone back
---------- Post added at 09:44 AM ---------- Previous post was at 09:36 AM ----------
also, i did hit factory reset under bootloader/fastboot screen (where it says tampered/unlocked),
Click to expand...
Click to collapse
I think the last bit was your problem. You can't factory reset from bootloader. Try to push twrp again in fastboot then load/flash clean romantic, then boot up. It already has root so you don't need to push su.
Sent from my HTC One X using xda app-developers app
I wanted to upgrade my Nabi with the latest OTA. I had TWRP 2.2.2.1. I used it to revert to an old backup. After the restore, I tried to apply the OTA updates. After it rebooted and started the install I got an "!" Android logo.
I power cycled and I was able to boot back in. I noticed I still had the Play Store app (which will not work, error about connecting to services) and suspect the "stockunrooted" restore I used may not have been completely "stock". I did lose root and TWRP though.
I tried to reinstall TWRP again, but it appears that Fastboot no longer works since the restore. The tablet just hangs on the Nabi logo indefinitely. When I press Vol - & + with PWR, and select Recovery Mode, I just get another "!" Android logo (is this stock recovery?).
ADB works, it sees the tablet and I'm able to push, access shell etc.
I used motochopper to root the Nabi again. I tried installing flash_image to manually flash a new TWRP recovery.img, but running the command I get an error about "error scanning partitions".
I'm not sure what else I can do to get Fastboot working or a recovery system installed again. OTA upgrade will not apply, and I'm stuck on 1.9.37 at this point.
Does anyone have a suggestion how I can get Fastboot fixed and the Nabi back to "normal" / upgradeable.
Thanks for your help
kaijan said:
I wanted to upgrade my Nabi with the latest OTA. I had TWRP 2.2.2.1. I used it to revert to an old backup. After the restore, I tried to apply the OTA updates. After it rebooted and started the install I got an "!" Android logo.
Click to expand...
Click to collapse
What software rev did you get to when doing the OTA's?
I power cycled and I was able to boot back in. I noticed I still had the Play Store app (which will not work, error about connecting to services) and suspect the "stockunrooted" restore I used may not have been completely "stock". I did lose root and TWRP though.
Click to expand...
Click to collapse
That is usually a sign that various Google services are removed from the system partition. So in that case it is returned to stock, but there is still information of the Play install on the data partition.
I tried to reinstall TWRP again, but it appears that Fastboot no longer works since the restore. The tablet just hangs on the Nabi logo indefinitely. When I press Vol - & + with PWR, and select Recovery Mode, I just get another "!" Android logo (is this stock recovery?).
ADB works, it sees the tablet and I'm able to push, access shell etc.
I used motochopper to root the Nabi again. I tried installing flash_image to manually flash a new TWRP recovery.img, but running the command I get an error about "error scanning partitions".
I'm not sure what else I can do to get Fastboot working or a recovery system installed again. OTA upgrade will not apply, and I'm stuck on 1.9.37 at this point.
Click to expand...
Click to collapse
Usually when it hangs at the Nabi logo it means you don't have the USB cable plugged in or that the fastboot driver is not installed.(Check device manager and see if fastboot driver is installed/no exclimation point). If that's not the issue then it's the bootloader which I have only seen one person have that issue. Depending on which OTA's you have ran there was an update to a Jellybean bootloader so it's possible. That can be fixed with nvflash or placing the bootloader blob in the staging partition.
Also you can always get recovery back without fastboot in Android by dd'ing the recovery over.
For example if the recovery image is on the internal SD
dd if=/data/media/recovery.img of=/dev/block/platform/sdhci-tegra.3/by-name/SOS
aicjofs said:
What software rev did you get to when doing the OTA's?
That is usually a sign that various Google services are removed from the system partition. So in that case it is returned to stock, but there is still information of the Play install on the data partition.
Usually when it hangs at the Nabi logo it means you don't have the USB cable plugged in or that the fastboot driver is not installed.(Check device manager and see if fastboot driver is installed/no exclimation point). If that's not the issue then it's the bootloader which I have only seen one person have that issue. Depending on which OTA's you have ran there was an update to a Jellybean bootloader so it's possible. That can be fixed with nvflash or placing the bootloader blob in the staging partition.
Also you can always get recovery back without fastboot in Android by dd'ing the recovery over.
For example if the recovery image is on the internal SD
dd if=/data/media/recovery.img of=/dev/block/platform/sdhci-tegra.3/by-name/SOS
Click to expand...
Click to collapse
OTA is trying to install 2.1.27
You were correct about the fastboot driver issue. I was using Windows 8.1 and it it wasn't working properly. I switched to Ubuntu and now have no problems.
I was able to flash TWRP 2.3.3 and tried another restore to stock. Did OTA again, but still get the "!" Android shortly after it reboots and starts installing. I can't seem to get rid of gapps either. Play Store is still installed. I've tried wiping /data/media, cache's etc and it still remains.
I'm not sure why the OTA upgrade keeps failing. Do you think it's due to the gapps still being on the device?
Any other ideas on how I can get the OTAs to work?
Update:
I booted up stock recovery and tried the update from cache
Verifying current system...
assert failed: apply_patch_check("/system/app/Gallery2.apk", "4cadedee1defcdc28afc99ea968ebb1e631e7b9", "ee310bfc0d0ad2fe11356b97f8cb6e754aa43f2b")
E: Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
kaijan said:
OTA is trying to install 2.1.27
You were correct about the fastboot driver issue. I was using Windows 8.1 and it it wasn't working properly. I switched to Ubuntu and now have no problems.
I was able to flash TWRP 2.3.3 and tried another restore to stock. Did OTA again, but still get the "!" Android shortly after it reboots and starts installing. I can't seem to get rid of gapps either. Play Store is still installed. I've tried wiping /data/media, cache's etc and it still remains.
I'm not sure why the OTA upgrade keeps failing. Do you think it's due to the gapps still being on the device?
Any other ideas on how I can get the OTAs to work?
Update:
I booted up stock recovery and tried the update from cache
Click to expand...
Click to collapse
Hmm that is it weird. It does look like gapps is still installed .As gapps removes gallery2.apk and why it's failing, I don't understand if it's stock how that is happening. Use these updates yet? http://forum.xda-developers.com/wiki/Fuhu_nabi_2
This thread died out....I hate to bump it back to the top...But I have a NABI2-NV7A that I rooted along time ago....and i booted it up and was gonna do some upgrades and everything went kaboom!!
I have TWRP 2.2.2.1 installed.
I can get into TWRP but not fast-boot mode
I'm on a laptop with windows 10 installed...I don't think it's driver related....as i can send commands via adb while TWRP is up....and the NABI responds to those commands
But i never get past the logo screen....and I'm not sure what to to do with NVflash.
I'm experienced...but rooted this thing and installed GAPPS like 2 years ago and the kids dug this thing up and the play store wouldn't work any longer....i read about the OTA....so i was trying to go back to stock and get those OTA's.
Any suggestions or advice?? Anyone...hello....bueller....bueller
hotspace said:
This thread died out....I hate to bump it back to the top...But I have a NABI2-NV7A that I rooted along time ago....and i booted it up and was gonna do some upgrades and everything went kaboom!!
I have TWRP 2.2.2.1 installed.
I can get into TWRP but not fast-boot mode
I'm on a laptop with windows 10 installed...I don't think it's driver related....as i can send commands via adb while TWRP is up....and the NABI responds to those commands
But i never get past the logo screen....and I'm not sure what to to do with NVflash.
I'm experienced...but rooted this thing and installed GAPPS like 2 years ago and the kids dug this thing up and the play store wouldn't work any longer....i read about the OTA....so i was trying to go back to stock and get those OTA's.
Any suggestions or advice?? Anyone...hello....bueller....bueller
Click to expand...
Click to collapse
Have you tried using "adb reboot-bootloader"
There are some things to try before breaking out nvflash. The easiest would be to flash the boot loader and a new TWRP in one recovery session.
Boot twrp2.2.21, Install KK boot loader zip and then install TWRP KK287 zip
Then restore the 3.0.13 ROM
Files and directions here
http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119
aicjofs said:
Have you tried using "adb reboot-bootloader"
There are some things to try before breaking out nvflash. The easiest would be to flash the boot loader and a new TWRP in one recovery session.
Boot twrp2.2.21, Install KK boot loader zip and then install TWRP KK287 zip
Then restore the 3.0.13 ROM
Files and directions here
http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119
Click to expand...
Click to collapse
I did try ADB REBOOT-BOOTLOADER all that happens is the NABI2 restarts and sits at the logo screen.
I'm able to push via ADB, so I will download the suggested files and take your advice. I'll report back. And, thanks for the reply.
Update...
I was able to push all of the needed files and I verified I pushed them completely by using "adb push -p xxxxxx /sdcard"
I then rebooted back into TWRP
I flashed KK3013bootloader.zip, then flashed twrp-recovery-NV7AUS-287.zip
Rebooted and I can't get back into TWRP. And, now I can't establish a connection for adb commands.
Any advice? tips...pointers? Could this truly be my first bricked device??
hotspace said:
Update...
I was able to push all of the needed files and I verified I pushed them completely by using "adb push -p xxxxxx /sdcard"
I then rebooted back into TWRP
I flashed KK3013bootloader.zip, then flashed twrp-recovery-NV7AUS-287.zip
Rebooted and I can't get back into TWRP. And, now I can't establish a connection for adb commands.
Any advice? tips...pointers? Could this truly be my first bricked device??
Click to expand...
Click to collapse
Nah Nabi2 is practically impossible to brick.
So do you get the command list in the top left when you press the vol and power buttons? i.e the selection continue, fastboot, recovery kernel, forced recovery? or when you select recovery kernel it just doesn't boot TWRP?
I wont type a lot of stuff until I get you answer but if we need to go the nvflash route this is some good reading. You will need to get in to APX mode, install the driver and issue some commands.
Read this post and next few pages after it
http://forum.xda-developers.com/showpost.php?p=46579190&postcount=1687
General idea of commands
http://forum.xda-developers.com/showpost.php?p=48683262&postcount=124
Might be some work, but we should be able to get the device back, I'll let you know which is the best way after I see your reply.
Yup, no boot options. And, I can't get back into TWRP. I hold power button to shut it down. Then vol+ power and typically I'd get the boot options, but nothing, just the logo. Then hold power button to shut down. Continue...repeat...
I appreciate you sticking in for the long haul on this.
Sent from my SM-N920P using Tapatalk
hotspace said:
Yup, no boot options. And, I can't get back into TWRP. I hold power button to shut it down. Then vol+ power and typically I'd get the boot options, but nothing, just the logo. Then hold power button to shut down. Continue...repeat...
I appreciate you sticking in for the long haul on this.
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
Damn. It IS going to be a long haul, but you will know the tablet well when its done. I don't have the tablet to test anymore, so I have to work from memory(and that's been a long time)
Well the bad news is this is going to require opening the tablet. See this post http://forum.xda-developers.com/showpost.php?p=46694284&postcount=1701
You are going to have to short those pins to get it in to APX mode and use nvflash
-You will need the APX driver as well.
-The nvflash package
http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119
I will type more later.
aicjofs said:
Damn. It IS going to be a long haul, but you will know the tablet well when its done. I don't have the tablet to test anymore, so I have to work from memory(and that's been a long time)
Well the bad news is this is going to require opening the tablet. See this post http://forum.xda-developers.com/showpost.php?p=46694284&postcount=1701
You are going to have to short those pins to get it in to APX mode and use nvflash
-You will need the APX driver as well.
-The nvflash package
http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119
I will type more later.
Click to expand...
Click to collapse
Sweet! Looking forward to this.
Sent from my SM-N920P using Tapatalk
hotspace said:
Sweet! Looking forward to this.
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
Get the nvflash package from the Nabi General Info thread I linked above
Unzip in to a directory of your choosing and open a command prompt in that folder
The Nabi will be broken open and connected by USB to computer
So once you get those pins shorted and press the power button the screen should come on and be completely black(you can tell the backlight is on though)
Check in device manager for a new device(it will be auto detected or you will have to manually install APX driver)
Once the driver is installed you can issue nvflash commands
nvflash --bl bootloader.bin --download 4 bootloader.bin
Before pressing enter for the below command get ready to press and hold the vol+ key.
nvflash --resume --go
Right on. I'll dig into this in the morning
Sent from my SM-N920P using Tapatalk
@aicjofs, I still haven't begun breaking the Nabi down. I'm working from home today and should be able to squeeze the disassemble in sometime today.
I scanned through the comments you've left since finding out I wasn't able to get to the boot menu...I'll post back once I get it torn apart.
Hello, fellow Android hackers.
Short: I am trying to install CM on a L21, but fail booting into TWRP (getting only stock recovery).
What I did, working with a brand-new phone:
Unlock bootloader.
Flash TWRP 3.0.2.
Boot to TWRP. It worked.
Try flashing CM, which failed due to some failed assert. Googling revealed a thread on these forums which suggested I had to do a stock update to Marshmallow first.
Downloaded the update through EMUI's updater.
The updater booted to TWRP which aborted the installation because of a failed zip signature check.
I disabled signature checking and ran the installation again. It succeeded.
Tried to directly install CM over it. I got the error message stating I couldn't flash on top of incompatible data.
At this point, I probably should just have wiped system and flash CM, but for some reason I decided to boot to stock.
Here is where it all seems to have gone wrong.
Try to flash and boot to TWRP, like in steps 13 to 18.
Push the B340 UPDATE.APP to /sdcard/dload.
Start the phone using power + vol down + vol up.
I have verified that the phone is on B340 and the builtin updater won't find further updates.
(I have repeated this step and the following ones countless times.)
Boot to bootloader and flash TWRP. Yes, the command succeeds.
Code:
…$ sudo fastboot flash recovery twrp-3.0.2-0-kiwi.img
target reported max download size of 266338304 bytes
sending 'recovery' (45202 KB)...
OKAY [ 1.418s]
writing 'recovery'...
OKAY [ 0.641s]
finished. total time: 2.059s
fastboot reboot
adb reboot recovery # boots to stock recovery
Boot to bootloader and flash TWRP.
Hold power + vol up
I read that the duration holding the keys matters, so I tried this very often, but I always got to one of two different stock recoveries.
Factory reset and cache wipe with one of the two stock recoveries.
I also considered crushing the phone on the wall on multiple occasions, but then decided it would not help me with my goal.
Okay.
L21 with B340, how u boot to TWRP? -_-
Also, the two stock recoveries have the menu options "Download latest version and recovery, Reboot, Shutdown" and "Reboot, Wipe data/factory reset, Wipe cache partition".
I humbly thank everyone in advance who might have some contributions to share.
ok . as i understand ,
First Charge Ur Phone Up To 50%+
Second : Go Back To Stock L 5.0.1
Third : download The latest Nightly Version OF CM + Recovery Rom | Recovey
Forth : Flash Recovery Only Throw ADB if u got any error please Attach here if success Go to step 5
Fifth : Shut Down And HOLD Volume-up + Power As soon u see Honor logo Release Power But Keep Volume Rocked Pressed !
Last : Install The Cm After U already copy To SD Card .
Gd Luck ! .
i will presume that you are on stock recovery,
now go to honor 5x repository and download b320 firmware
now place it in dload folder and flash
now boot to bootlader and try flashing twrp
then do not directly boot to revovery
just do fastboot reboot
then now do adb reboot recovery
youl be with twrp and forst things first ,compulsarily do a backup
then now assuming that you have transfered layest cm to sd card,
first goto wipe , then select all except internal and external sd cards , then wipe
now install, you should be good to go,
i had your issue when i was on b34p, but b320 is a great base and supports all custom roms..try it
(I am sorry for not answering sooner, but I have a lot on my plate right now. :/ )
Thanks for the replies.
Romiui said:
ok . as i understand ,
First Charge Ur Phone Up To 50%+
Second : Go Back To Stock L 5.0.1
Third : download The latest Nightly Version OF CM + Recovery Rom | Recovey
Forth : Flash Recovery Only Throw ADB if u got any error please Attach here if success Go to step 5
Fifth : Shut Down And HOLD Volume-up + Power As soon u see Honor logo Release Power But Keep Volume Rocked Pressed !
Last : Install The Cm After U already copy To SD Card .
Gd Luck ! .
Click to expand...
Click to collapse
2: As I understood it I only had to upgrade to M in the first place to be able to install CM. The downgrade will not undo whatever happened there?
3: I am not sure that I understand what you're trying to say, but I know of no way to flash recoveries via ADB. The point is that, as posted in the OP, flash via fastboot allegedly succeeds and as soon as I boot to the recovery, I'm back to stock.
thilak devraj said:
i will presume that you are on stock recovery,
now go to honor 5x repository and download b320 firmware
now place it in dload folder and flash
now boot to bootlader and try flashing twrp
then do not directly boot to revovery
just do fastboot reboot
then now do adb reboot recovery
youl be with twrp and forst things first ,compulsarily do a backup
then now assuming that you have transfered layest cm to sd card,
first goto wipe , then select all except internal and external sd cards , then wipe
now install, you should be good to go,
i had your issue when i was on b340, but b320 is a great base and supports all custom roms..try it
Click to expand...
Click to collapse
Thanks. I actually tried the dload method with B140 after writing this post, but it doesn't seem to work—same with B330 (the repo doesn't contain a B320 for L21). As far as I can tell, the dload install appears pretends to work fine: I'm getting a successful archive verification, an install meter and no error message. But the OS is not replaced.
I am uncertain if I need an actual microSD card—different sources seem to suggest different things here—but I generally would assume that, if there was no valid image in the right place, I would be getting an error message.
I am fine with whatever suggestion that wouldn't result in a brick. Data loss is fine, there's nothing on it.
A dumb question but do you disconnect the phone from PC or Mac after flashing twrp, firing fastboot reboot and quickly press power and vol up to boot to twrp.
If you already did that, try unlocking command once more and then try flashing it...
You can also try
Fastboot boot twrp_kiwi.img
To boot directly to twrp without flashing.
Hope any of it works.
ksdug said:
(I am sorry for not answering sooner, but I have a lot on my plate right now. :/ )
Thanks for the replies.
but I know of no way to flash recoveries via ADB.
D
Click to expand...
Click to collapse
All recoveries can be Flashed throw Fast-boot ADB Boss .
ksdug said:
(I am sorry for not answering sooner, but I have a lot on my plate right now. :/ )
Thanks for the replies.
2: As I understood it I only had to upgrade to M in the first place to be able to install CM. The downgrade will not undo whatever happened there?
3: I am not sure that I understand what you're trying to say, but I know of no way to flash recoveries via ADB. The point is that, as posted in the OP, flash via fastboot allegedly succeeds and as soon as I boot to the recovery, I'm back to stock.
Thanks. I actually tried the dload method with B140 after writing this post, but it doesn't seem to work—same with B330 (the repo doesn't contain a B320 for L21). As far as I can tell, the dload install appears to work fine: I'm getting a successful archive verification, an install meter and no error message. But the OS is not replaced.
I am uncertain if I need an actual microSD card—different sources seem to suggest different things here—but I generally would assume that, if there was no valid image in the right place, I would be getting an error message.
I am fine with whatever suggestion that wouldn't result in a brick. Data loss is fine, there's nothing on it.
Click to expand...
Click to collapse
glad you did it
thilak devraj said:
glad you did it
Click to expand...
Click to collapse
I rephrased that part as it was unclear. I didn't manage to pull off a downgrade.
muradulislam said:
A dumb question but do you disconnect the phone from PC or Mac after flashing twrp, firing fastboot reboot and quickly press power and vol up to boot to twrp.
If you already did that, try unlocking command once more and then try flashing it...
Click to expand...
Click to collapse
I did, but to no avail. Reunlocking had no effect either.
muradulislam said:
You can also try
Fastboot boot twrp_kiwi.img
To boot directly to twrp without flashing.
Hope any of it works.
Click to expand...
Click to collapse
I love you. I had totally forgotten about that. Using the boot command I managed to install CM, but I still cannot replace the stock recovery. Maybe I'll try letting CM write its own recovery with its next update, but I guess I'll leave it at that. The only downside is that my dad now needs me for doing updates. :/
Thanks very much.
ksdug said:
I rephrased that part as it was unclear. I didn't manage to pull off a downgrade.
I did, but to no avail. Reunlocking had no effect either.
I love you. I had totally forgotten about that. Using the boot command I managed to install CM, but I still cannot replace the stock recovery. Maybe I'll try letting CM write its own recovery with its next update, but I guess I'll leave it at that. The only downside is that my dad now needs me for doing updates. :/
Thanks very much.
Click to expand...
Click to collapse
wait......
you couldnt make it?? ok right now were are you at??
how to boot Honor 5x into TWRP
I know this is an old post, but since I tried for nearly a week to get my Honor 5x to boot in TWRP when pushing volume up + power button, I just wanted to post how I finally got it working, just in case anyone else should have the same problem...
1. First, I downloaded the latest stock rom. On my Honor 5x Android 5 (Lollipop) was installed, so I downloaded an Android 6 (marshmallow) stock rom. Make sure to get the correct version for your region (e.g. C432 for Europe). I found the correct rom file by simply googeling. If you are in a boot loop or do not have a working android on your phone, read instructions below.
2. I un-zipped the rom file and copied the update.app to my sd card to folder "dload"
3. I booted regularly into Android and started the update installation from the settings, where I could select option to install from SD card.
4. once that was done, i enabled USB debugging in developer tools and booted into TWRP from ADB with command
fastboot boot twrp-3.1.0-0-kiwi.img
5. Then, I installed SuperSu (SuperSU-v2.82-201705271822.zip)
6. Then, I flahed TWRP directly FROM TWRP. To do so, I clicked "Install" button, clicked "Install Image" and then selected TWRP file (which i copied to my SD card earlier). BE CAREFUL TO FLASH TWRP as Revovery (NOT boot). Actually, I first flashed twrp-3.0.0-0-kiwi.img, then directly after flashed twrp-3.0.2-0-kiwi.img and then I flashed twrp-3.0.0-1-kiwi.img (you see I was kind of desperate...). After that, from TWRP I booted into bootloader and again flashed twrp image from PC using adb:
fastboot flash recovery twrp-3.1.1-0-kiwi.img
7. from ADB, I again booted into TWRP
fastboot boot twrp-3.1.1-0-kiwi.img
8. ... where I once more installed TWRP.
After that I clicked reboot and selected to boot into Recovery. Then it finally worked.
After endless tries to get my phone to boot into TWRP when pushing volume up and power button, I am not sure which of the above steps made the difference. I think the important part is to update to the latest android version.
BTW: my first problem was I bricked my phone by trying to install lineageos from TWRP 3.1.1.1 and was in an endless bootloop. Here is how I got a regular android running:
I booted into bootloader (power + vol DOWN) and flashed the following files from adb (i got the files by extracting an android stock rom with Huawei Update Extractor (HuaweiUpdateExtractor_0.9.9.3.zip)):
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
Hope this helps...
It's better to post in a new thread, that will be more helpful for you
Hi, I oem unlocked my Nexus 9, installed TWRP and SuperSU, but I think I missed a step before I can go to custom ROMs and all. I've looked for instructions but I'm just getting confused. I firstly cannot reboot into TWRP unless I fastboot boot recovery from my PC every time. If I don't do that, it just boots into the Flounder PVT Ship white screen with Fastboot USB in red and below that HBOOT, REBOOT, REBOOT FASTBOOT, and POWER DOWN.
What step am I missing in this process? Do I need some sort of custom image or what am I doing wrong?
Thanks,
Chris
Hello,
It can get a bit confusing sometimes and people generally expect you to just know lol.
You've not missed a step. Getting into recovery is irritating lol. For as long as I've had it if booted into recovery from the power menu lol xD.
Reboot the Google Nexus 9 by holding the Power and the Volume Down buttons at the same time and wait until the tablet display shows a Google splash screen before releasing the buttons.
If you get a android with an exclamation mark then you've made a boo boo. Dw, even us pros muck up ;]
Go back to your fastboot. Flash twrp like you do. But this time once you've flashed it type
Code:
fastboot boot recovery twrp.img
That should boot your device into recovery after flashing it.
There it should be stuck on there nicely of it takes a while Dw. That's just the fun of owning a N9 lol. That should Do it .
Happy Flashing.
Give us a Thanka if I helped
ChrispyChris said:
Hi, I oem unlocked my Nexus 9, installed TWRP and SuperSU, but I think I missed a step before I can go to custom ROMs and all. I've looked for instructions but I'm just getting confused. I firstly cannot reboot into TWRP unless I fastboot boot recovery from my PC every time. If I don't do that, it just boots into the Flounder PVT Ship white screen with Fastboot USB in red and below that HBOOT, REBOOT, REBOOT FASTBOOT, and POWER DOWN.
What step am I missing in this process? Do I need some sort of custom image or what am I doing wrong?
Thanks,
Chris
Click to expand...
Click to collapse
If you installed TWRP using
Code:
fastboot flash recovery twrp.img
The only ways I know to get into recovery are to reboot to recovery from the Power menu of your ROM
OR
Boot to fastboot, select HBOOT, then select Recovery. If TWRP is installed as your recovery this will boot TWRP. If it goes to the dead droid screen then you need to install TWRP properly, using the fastboot flash command above.
I can't get my nexus 9 to run twrp as well.
I go to fastboo, select Hboot, then I get the android with exclamation, volume up and power brings up the original android recovery menu, not twrp. I've unlocked the bootloader, wiped everything and tried again, no luck. Always the same result
Mephisto_POA said:
I can't get my nexus 9 to run twrp as well.
I go to fastboo, select Hboot, then I get the android with exclamation, volume up and power brings up the original android recovery menu, not twrp. I've unlocked the bootloader, wiped everything and tried again, no luck. Always the same result
Click to expand...
Click to collapse
Are you using the newest TWRP? 3.1.0.0? It's not working for me either, can't boot to recovery. Use 3.0.2.2 or whatever the last version was
I used the 3.1.0.0
the trick was, after installing it, reboot straight back into recovery, so it doesn't get overwritten