Anyone tried CM13 yet?
I can't post the link because of my low post count but if you visit invisiblek's site, he has some unofficial builds.
I decided to give it a go. So far so good. Didn't even do a clean install and it hasn't crashed at all. Everything I have tested seems to work (calls, data, camera). Only issue is no quick tile customization menu
Edit: Found QT customization, needed to enable System UI tuner by holding down the gear in the pull down menu
Sent from my SCH-I545 using Tapatalk
meirg said:
I decided to give it a go. So far so good. Didn't even do a clean install and it hasn't crashed at all. Everything I have tested seems to work (calls, data, camera). Only issue is no quick tile customization menu
Edit: Found QT customization, needed to enable System UI tuner by holding down the gear in the pull down menu
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Are you on MDK?
Looks like there is one issue, all incoming calls show unknown number. Quite possibly due to the dirty flash. I will probably try a clean install over Thanksgiving. Overall quite a solid ROM. Bravo to all the devs involved!
Sent from my SCH-I545 using Tapatalk
---------- Post added at 10:51 PM ---------- Previous post was at 10:48 PM ----------
bkkzak said:
Are you on MDK?
Click to expand...
Click to collapse
I believe so, I don't use safestrap. Baseband is OF1
Sent from my SCH-I545 using Tapatalk
meirg said:
Looks like there is one issue, all incoming calls show unknown number. Quite possibly due to the dirty flash. I will probably try a clean install over Thanksgiving. Overall quite a solid ROM. Bravo to all the devs involved!
Sent from my SCH-I545 using Tapatalk
---------- Post added at 10:51 PM ---------- Previous post was at 10:48 PM ----------
I believe so, I don't use safestrap. Baseband is OF1
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Can you link the rom? I'm wondering if I can flash this cuz I'm on OF1 as well; did you install via FlashFire or TWRP(custom recovery)?
bkkzak said:
Can you link the rom? I'm wondering if I can flash this cuz I'm on OF1 as well; did you install via FlashFire or TWRP(custom recovery)?
Click to expand...
Click to collapse
http://www.invisiblek.org/roms/cm-13.0/jfltevzw/
Used TWRP
Sent from my SCH-I545 using Tapatalk
meirg said:
I decided to give it a go. So far so good. Didn't even do a clean install and it hasn't crashed at all. Everything I have tested seems to work (calls, data, camera). Only issue is no quick tile customization menu
Edit: Found QT customization, needed to enable System UI tuner by holding down the gear in the pull down menu
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Good to hear. Did you get a chance to try bluetooth?
wastegas said:
Good to hear. Did you get a chance to try bluetooth?
Click to expand...
Click to collapse
I did not. I will check next time I install (back to 12.1 for now)
Sent from my SCH-I545 using Tapatalk
Would I be able to flash this on a rooted S4 with OF1 and FlashFire?
19lmyers said:
Would I be able to flash this on a rooted S4 with OF1 and FlashFire?
Click to expand...
Click to collapse
No
You have a locked bootloader.. Only ROM that will work is Stang5Litre's ROM(NOT THE PORT(unless he say's so, I don't recall any support for OF1 on that))
wastegas said:
Good to hear. Did you get a chance to try bluetooth?
Click to expand...
Click to collapse
Just did a full wipe and tested the 11/25 nightly. Bluetooth does work. Unknown number issue is still occurring though.
meirg said:
Just did a full wipe and tested the 11/25 nightly. Bluetooth does work. Unknown number issue is still occurring though.
Click to expand...
Click to collapse
Thanks for the update! Bluetooth working is a good sign. I'll wait after a few more builds then I'll give it a try. Which gapps did you use?
wastegas said:
Thanks for the update! Bluetooth working is a good sign. I'll wait after a few more builds then I'll give it a try. Which gapps did you use?
Click to expand...
Click to collapse
Open Gapps - minimal
Sent from my SCH-I545 using Tapatalk
Anyone try the newer nightlys? I'm wondering if the unknown number issue is fixed so I can upgrade.
Sent from my SCH-I545 using Tapatalk
Installed the 12/3 nightly last night, and caller ID works! So far running smoothly. Think I will keep as daily driver now. Thanks devs!
Sent from my SCH-I545 using Tapatalk
Just flashed 12/8 nightly and can also confirm Caller Id is working! Great work Devs!
Does MMS work on the latest build (20151208)?
CM13 is now showing up in the nightly official jfltevzw downloads.
wastegas said:
CM13 is now showing up in the nightly official jfltevzw downloads.
Click to expand...
Click to collapse
I wouldn't suggest updating from CM12.1 to CM13 using the latest zip. Maybe CM13 is going to require a fresh flash.
I made a NANDroid and gave it a go. The update to CM13 wasn't so bad, you just have to grant all permissions to the system updater after the .zip update: http://forum.cyanogenmod.org/topic/118479-cm13-setup-wizard-has-stopped-working/page__st__20
It was the GApps that bugged. I tried the Nano package from http://opengapps.org. Error prompts with GMail, Keep and others persisted. Had to restore CM12.1.
Maybe just me but I am noticing significantly better battery life with CM 13 compared to CM 12.1
Related
Aargh... well, to start, I couldn't get CM10 past the boot animation. No worries, I was able to load MeanROM just fine. All apps are there, and loaded Gapps 4.1 as well - I even flashed the kernel. So I can boot and have normal phone operation, except for...
Although I do have internet access,
1) Play Store will not connect.
2) Gmail keeps crashing
3) And none of my Google accounts have an option to sync contacts.
Three strikes!
Can someone help me with any of the aforementioned problems?
finalewiz said:
Aargh... well, to start, I couldn't get CM10 past the boot animation. No worries, I was able to load MeanROM just fine. All apps are there, and loaded Gapps 4.1 as well - I even flashed the kernel. So I can boot and have normal phone operation, except for...
Although I do have internet access,
1) Play Store will not connect.
2) Gmail keeps crashing
3) And none of my Google accounts have an option to sync contacts.
Three strikes!
Can someone help me with any of the aforementioned problems?
Click to expand...
Click to collapse
You shouldn't flash the gapps sense roms have them baked in try just wiping and reflash
Sent from my EVO using Tapatalk 2
finalewiz said:
Aargh... well, to start, I couldn't get CM10 past the boot animation. No worries, I was able to load MeanROM just fine. All apps are there, and loaded Gapps 4.1 as well - I even flashed the kernel. So I can boot and have normal phone operation, except for...
Although I do have internet access,
1) Play Store will not connect.
2) Gmail keeps crashing
3) And none of my Google accounts have an option to sync contacts.
Three strikes!
Can someone help me with any of the aforementioned problems?
Click to expand...
Click to collapse
yeah I'm having the same issue, except for I'm still using cm10 latest nightly. Can't seem to get google to sync at all. had the keyboard crash over and over again as well. also my home and recent buttons don't respond at all either. They vibrate when pressed but other than that nothing happens.
Kernal version 3.0.51 -geb1844c
android version 4.1.2
cm10 version 10-20121205 nightly jewel
currently downloading cm10.0.0 and giving that a try...
thanks in advance
---------- Post added at 12:51 AM ---------- Previous post was at 12:46 AM ----------
thicklizard said:
You shouldn't flash the gapps sense roms have them baked in try just wiping and reflash
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
So what version should i get for gapps... sorry probably newb question...and should i wipe anything to install it and what should i use to install it with. used team wins touch recovery last time to install both rom and gapps
cerius said:
yeah I'm having the same issue, except for I'm still using cm10 latest nightly. Can't seem to get google to sync at all. had the keyboard crash over and over again as well. also my home and recent buttons don't respond at all either. They vibrate when pressed but other than that nothing happens.
Kernal version 3.0.51 -geb1844c
android version 4.1.2
cm10 version 10-20121205 nightly jewel
currently downloading cm10.0.0 and giving that a try...
thanks in advance
---------- Post added at 12:51 AM ---------- Previous post was at 12:46 AM ----------
So what version should i get for gapps... sorry probably newb question...and should i wipe anything to install it and what should i use to install it with. used team wins touch recovery last time to install both rom and gapps
Click to expand...
Click to collapse
Which gapps did you use? You should use the ones linked on IRC or the 4.2 gapps and no wipe is needed although you can wipe dalvik cache if you want.
Edit I think the gapps you need are dated as 20121011 jb gapps
Edit 2 are you son? Because I believe the kernel should be 3.0.53
Sent from my EVO using Tapatalk 2
thicklizard said:
Which gapps did you use? You should use the ones linked on IRC or the 4.2 gapps and no wipe is needed although you can wipe dalvik cache if you want.
Edit I think the gapps you need are dated as 20121011 jb gapps
Edit 2 are you son? Because I believe the kernel should be 3.0.53
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
yeah I am s-on. and i have kernal 3.0.51 - geb1844c
would i use goomanager to flash the image from the rom? and if so wouldnt i use the latest nightly or the stable cm10.0.0?
cerius said:
yeah I am s-on. and i have kernal 3.0.51 - geb1844c
would i use goomanager to flash the image from the rom? and if so wouldnt i use the latest nightly or the stable cm10.0.0?
Click to expand...
Click to collapse
You would flash the bootimg of which ever one you flashed
Sent from my EVO using Tapatalk 2
thicklizard said:
You would flash the bootimg of which ever one you flashed
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
im going to retry the flash image gui with the rom i have used, cm10.0.0, and install the gapps you said to use. will post in a bit
---------- Post added at 02:16 AM ---------- Previous post was at 01:34 AM ----------
cerius said:
im going to retry the flash image gui with the rom i have used, cm10.0.0, and install the gapps you said to use. will post in a bit
Click to expand...
Click to collapse
install of the recent gapps seems to have gotten everything to work.. just my data connection now is super slow....any ideas ?
cerius said:
im going to retry the flash image gui with the rom i have used, cm10.0.0, and install the gapps you said to use. will post in a bit
---------- Post added at 02:16 AM ---------- Previous post was at 01:34 AM ----------
install of the recent gapps seems to have gotten everything to work.. just my data connection now is super slow....any ideas ?
Click to expand...
Click to collapse
Gapps shouldn't effect data so I really don't have anything but maybe turn in airplane mode for a minute then turn off airplane mode
Sent from my EVO using Tapatalk 2
thicklizard said:
You shouldn't flash the gapps sense roms have them baked in try just wiping and reflash
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
what do you mean.. "baked in"? you mean JUST flash MeanRom, and no Gaaps? thanks
finalewiz said:
what do you mean.. "baked in"? you mean JUST flash MeanRom, and no Gaaps? thanks
Click to expand...
Click to collapse
Sense roms don't require flashing gapps only AOSP,AOKP,CM10,ect.
thicklizard said:
You shouldn't flash the gapps sense roms have them baked in try just wiping and reflash
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
bigdaddy619 said:
Sense roms don't require flashing gapps only AOSP,AOKP,CM10,ect.
Click to expand...
Click to collapse
Awesome - that did the job. I see you're using the same ROM as me - what is the process to overclock, or is the ROM already doing that
(donation on the way)
finalewiz said:
Awesome - that did the job. I see you're using the same ROM as me - what is the process to overclock, or is the ROM already doing that
(donation on the way)
Click to expand...
Click to collapse
MeanROM comes overclocked at 1.7 or there is a zip you can flash and overclock at 1.8
Sent from my MB855 using xda app-developers app
BTW got it working.. just a slow connection while WiFi tethering. Fixed that also.
Sent from my EVO using xda app-developers app
Hello,
Does Thethering work on for this ROM?, http://forum.xda-developers.com/showthread.php?t=2140902?? I tried turning on Wifi AP and nothing happens. Also, is there a way to disable wallpaper scrolling on Bozooka Launcher for this same ROM??
Thank you.
Update: since the ROM is based off of CM10, tethering will not work yet. Not sure if epinter's fix will work. Also, there is no option to disable wallpaper scrolling. You will need to use a different launcher.
Thanks.
epinter's overclock kernel
Just to answer more avatar ROM questions. Epinter's 1.3 ghz over clock kernel will work on this ROM. http://forum.xda-developers.com/showthread.php?t=2140902&page=18.
Make sure its the cm10 version and not the cm10.1. Normal installation, just flash through CWM.
It will generate more heat but its bearable.
Mojar7070 said:
Just to answer more avatar ROM questions. Epinter's 1.3 ghz over clock kernel will work on this ROM. http://forum.xda-developers.com/showthread.php?t=2140902&page=18.
Make sure its the cm10 version and not the cm10.1. Normal installation, just flash through CWM.
It will generate more heat but its bearable.
Click to expand...
Click to collapse
Here is the link to the kernel. All credit goes to epinter. Thank you sir.
http://goo.im/devs/epinter/kernel_oc1300-cm10-20121026_1456-epinter-olympus.zip
O hi, i"ll just leave it her3.
I'll use this thread .
I've flashed Avatar and enjoyed it very much,until the gapps update. Phone's been crashing constantly ,making it imposible to use and i had to restore back to CM7. Is there any way around ? A flashed with full wipe.
BoriDe said:
I'll use this thread .
I've flashed Avatar and enjoyed it very much,until the gapps update. Phone's been crashing constantly ,making it imposible to use and i had to restore back to CM7. Is there any way around ? A flashed with full wipe.
Click to expand...
Click to collapse
which gapps update did you use?? If you used the gapps from the 3.1.10 kernel version of AvatarRom, it may not work, not sure though. This thread for the Previous version of AvatorROM with the Gingerbread kernel using the 20121019 GApps.
I flashed the latest build,full clean wipe. Gapps were installed through rom update app (20121011).
I tryed reflashing the rom and trying again and although installation came through (i could sync with google acount) , no
google play icon is showing'only Gtalk.
---------- Post added at 02:04 PM ---------- Previous post was at 01:57 PM ----------
I used avatar-2.15b-0-20130614-UNOFFICIAL-olympus.zip build.
BoriDe said:
I flashed the latest build,full clean wipe. Gapps were installed through rom update app (20121011).
I tryed reflashing the rom and trying again and although installation came through (i could sync with google acount) , no
google play icon is showing'only Gtalk.
---------- Post added at 02:04 PM ---------- Previous post was at 01:57 PM ----------
I used avatar-2.15b-0-20130614-UNOFFICIAL-olympus.zip build.
Click to expand...
Click to collapse
Not sure then bro. Have you tried "fix permission" through your recovery?? I remember with the old build there were 2 Zip files, the zip files needed to be installed first, one after the other and then the Gapps. then wipe dalvik cache and/ (optional: cache partition) and reboot system.
Also, as it was mentioned before, the 3.1.10 Kernel in Latest Cm10.1 builds still has bugs. So if your concerned about a daily driver Rom you should probably stick with a CM7 based rom or at the Previous AvatarRom build. Sorry I couldn't help.
Tryed all that , no go. Its a very solid ROM ,but kinda useless without the Gapps. This is actually the only thing that didn't work. Otherwise a true daily driver candidate.
BoriDe said:
Tryed all that , no go. Its a very solid ROM ,but kinda useless without the Gapps. This is actually the only thing that didn't work. Otherwise a true daily driver candidate.
Click to expand...
Click to collapse
Have you guys tried the gapps from epinter? Latest gapps package should be 20130301
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Have you guys tried the gapps from epinter? Latest gapps package should be 20130301
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Isn't it advised to use only the Gapps that dev team supplyes with ROM?
BoriDe said:
Isn't it advised to use only the Gapps that dev team supplyes with ROM?
Click to expand...
Click to collapse
Not necessarily, if you have a rom with one android version, it's compatible with the gapps for that device and android version
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Not necessarily, if you have a rom with one android version, it's compatible with the gapps for that device and android version
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Well butter my ass and call me Sally,it worked. Flashed the ROM, flashed most recent GApps and it work just fine. Thanks.
BoriDe said:
Well butter my ass and call me Sally,it worked. Flashed the ROM, flashed most recent GApps and it work just fine. Thanks.
Click to expand...
Click to collapse
Lol no problem Sally
Sent from my MB860 using xda app-developers app
BoriDe said:
Well butter my ass and call me Sally,it worked. Flashed the ROM, flashed most recent GApps and it work just fine. Thanks.
Click to expand...
Click to collapse
Sweet deal. Learned something new as well.
Sent from my Nexus 7 using xda app-developers app
This Patch Is For 4.3 TW International Based Roms. It Will Not Work With 4.4 TW KitKat Roms!!
Works on:
[XXUEMK8] [XXUEMKF] [XXUEML1] [XXUEML6] [XXUEML9] [XXUENA4] International Based Roms
This is a Patch for TW 4.3 XXUE International Base Roms to work on 4.3 Verizon S4 with MDK firmware and custom recovery. There is a Minimum Patch which does not change the build.prop or contacts or dialer but some features of verizon will not work such as the ability to change from global mode to cdma/lte only mode and the signal icons will be international version not the verzion ones. Use this patch if the rom you are using is heavily themed. The Full Patch changers build.prop and flashes stock versions of the international dark dialer and contacts that will maintain more verizon functions along with using vzw signal icons and the ability to change from global mode and cdma/lte only mode. Use this patch to make the rom the most compatible with verizon. Both patches contain a modified version of the International dark themed SecMms.apk which works to receive both sms and mms and group messages. This app is required and cannot be changed so if the rom has a themed messaging app it will be replaced with mine. Sorry but thats the way it is.
THESE ARE NOT MY ROMS OR KERNALS I DONT HAVE ALL THE ANSWERS IF SOMETHING DOES NOT WORK I AM NOT RESPONSIBLE!
Instructions:
1: Download An International Rom [XXUEMK8] [XXUEMKF] [XXUEML1] [XXUEML6] [XXUEML9] [XXUENA4]
2: Download :
VZW_PATCH_FULL.zip
md5: 5965c22ff9472db3f4a1affe0d53cb4e
IMS_VZW_PATCH_FULL.zip (Use If You Get IMS Framework FC)
md5: f77a458873a285eac0236d0bfb89cc5b
VZW_PATCH_MINIMUM.zip
md5: 4d52a469594d21204a4d8b54ae38d590
SafeStrap Patches
VZW_PATCH_FULL_SS.zip
md5: bc5eb31498b4efe2a64bdad0181167e3
IMS_VZW_PATCH_FULL_SS.zip (Use If You Get IMS Framework FC)
md5: f77a458873a285eac0236d0bfb89cc5b
VZW_PATCH_MINIMUM_SS.zip
md5: 140b1bbe44b7be9ff5dfe6cec9239372
3: Install [XXUEMK8] [XXUEMKF] [XXUEML1] [XXUEML6] [XXUEML9] [XXUENA4] International Rom in recovery(Do Not reboot yet!)
4: Install VZW Patch Full Or Minimum
5: Reboot
6: Go through Setup
7: Reboot(Do Not Fix Root If it ask when rebooting)
8: Enjoy
9: If having issues try Installing KT-SGS4 Jellybean Kernel by ktoonsez (install after you install rom and before you reboot)
10: Download TW 4.3 KT-SGS4 Jellybean Kernel By ktoonsez (go there and thank him for letting me use it)
Should Have 4.3 Rom with Data and MMS working
And with this, you're able to keep the custom bootloader?
Velocifero said:
And with this, you're able to keep the custom bootloader?
Click to expand...
Click to collapse
Yes
Also, is there a root method for this after installing?
Velocifero said:
Also, is there a root method for this after installing?
Click to expand...
Click to collapse
Its rooted
You sir, are the man!! Thank you!!
Sent from a Shaftamle Galaxy S4
"Thanks Button" is always appreciated!
http://mycolorscreen.com/Shaftamle/
Works! Here's a screenshot. Only issue I see so far is when you reboot the phone, WIFI forgets any connected network.
Velocifero said:
Works! Here's a screenshot. Only issue I see so far is when you reboot the phone, WIFI forgets any connected network.
Click to expand...
Click to collapse
Can anyone confirm/deny the Samsung Apps app is included and working. I am on Old&Slows rom and I can't for the life of me get the dam thing to work.
Velocifero said:
Works! Here's a screenshot. Only issue I see so far is when you reboot the phone, WIFI forgets any connected network.
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?p=47262471
Curious if anyone has used this method to flash some of the custom ROMs. I'd love to see some of the international ROMs running on our device.
Sent from my SCH-I545 using Tapatalk
Seems great, except no WiFi. Anyone else having issues getting it to turn back on?
Other issues I've seen is sometimes it'll take 2-3 minutes to boot up. There could be an explanation for this that I'm not aware of. It's also froze on me while charging. Screen was still off but nothing I could do would unlock it but the red LED indicator light was responding to the charge plug still.
cvondra said:
Can anyone confirm/deny the Samsung Apps app is included and working. I am on Old&Slows rom and I can't for the life of me get the dam thing to work.
Click to expand...
Click to collapse
Samsung Apps did not come preinstalled on this ROM but after installing it from their website, it seems to be working fine.
Ironclad Lou said:
Try this:
http://forum.xda-developers.com/showthread.php?p=47262471
Curious if anyone has used this method to flash some of the custom ROMs. I'd love to see some of the international ROMs running on our device.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
This worked, thanks! Not having wi-fi or even intermittent wi-fi would have been a deal breaker.
---------- Post added at 04:17 PM ---------- Previous post was at 04:15 PM ----------
pbrauer said:
Seems great, except no WiFi. Anyone else having issues getting it to turn back on?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=47262471
Ironclad Lou said:
Try this:
http://forum.xda-developers.com/showthread.php?p=47262471
Curious if anyone has used this method to flash some of the custom ROMs. I'd love to see some of the international ROMs running on our device.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
That did the trick! Thanks, forgot all about that thread for fixing the problem on the SIII, so good to know that it works here too.
And still have root!
---------- Post added at 09:51 PM ---------- Previous post was at 09:30 PM ----------
Velocifero said:
Samsung Apps did not come preinstalled on this ROM but after installing it from their website, it seems to be working fine.
[/COLOR]
http://forum.xda-developers.com/showthread.php?p=47262471
Click to expand...
Click to collapse
Where did you find the Samsung Apps?
Phone froze again with the screen off. This time I was pressing the power button on and off, testing the lag of the lockscreen. One more time and I'm going back to Eclipse! Also, AdBlock doesn't work on Android 4.3 so I'm trying Adblock Plus in the meantime. https://adblockplus.org/en/android-install
*edit* Aaaand it froze again for the 3rd time. Back to Eclipse. I can't take this instability.
pbrauer said:
Where did you find the Samsung Apps?
Click to expand...
Click to collapse
Go to www.samsungapps.com on your phone, it's easier from there.
can we restore nandroid backup and restore it if we dont like this
chuckboy1129 said:
can we restore nandroid backup and restore it if we dont like this
Click to expand...
Click to collapse
Yea I've done it on my homeboy wife's s4.
Sent from my Beastly powered Hyperdrive S4 using Tapatalk 4
Dang Holla....is there any Rom you do not flash? You are a crack-flashing machine bro. But thanks for all the help you give in all these threads
Sent fom my Mobile Beast Device
So are you guys trying these other international ones?
Sent from my SCH-I545 using Tapatalk
ahoslc said:
So are you guys trying these other international ones?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I'm running Phoenix Rom using this method, working pretty well.
Sent from my SCH-I545 using xda app-developers app
ThugosaurusRex said:
I'm running Phoenix Rom using this method, working pretty well.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
That's what I'm about to try.
Sent from my SCH-I545 using Tapatalk
By chance can you point me in the right direction to check some of these international roms out. Might want to give this a try also.
Sent from my SCH-I545 using xda app-developers app
So Xposed was updated for Lollipop. How many of you are using it with the Nexus 10? I was using CM12 before Xposed and when I first tried installing it, it worked. Then I tried updating the nightly and flashing Xposed again and boot looped. Since then, I couldn't get it flashed on CM12 again. I decided to try an AOSP ROM and went with Dirty Unicorns. Xposed works just fine on that one. So anyone else using Xposed? What ROM are you using it with? Anyone having any issues? What modules are you using? I was thinking of using this thread as a general Xposed discussion since I didn't see another one.
I also had problems with bootloops while flashing the alpha xposed build..
Since the i reflashed cm12 and eagerly waiting for a more stable xposed build!
Running the extended boot menu mod right now. Looking forward to a gravity box release
Beaster said:
I also had problems with bootloops while flashing the alpha xposed build..
Since the i reflashed cm12 and eagerly waiting for a more stable xposed build!
Click to expand...
Click to collapse
I'm not so sure its xposed that's causing the problem. My Nexus 5 hasn't had any issues. I've only had issues on CM12 on the nexus 10. But as i mentioned, its been running good on the dirty unicorn ROM which is an aosp ROM.
mymusicathome said:
Running the extended boot menu mod right now. Looking forward to a gravity box release
Click to expand...
Click to collapse
I've installed Xposed GEL settings and flat style colored bars. Both running good. For some reason, i can't get the status and nav bars on the home screen to be transparent though.
I'm running Xposed with no issues on Purity ROM. Tried to use GEL Settings but that was a mess. Can't figure out a good configuration for my homescreen grids and icon sizes, etc..etc... Anyone have a suggestion about that?
I'd love to have some sort of fullscreen Zooper widget overlay on my homescreens but alas that kind of thing is above my abilities. Lol
Beaster said:
I also had problems with bootloops while flashing the alpha xposed build..
Since the i reflashed cm12 and eagerly waiting for a more stable xposed build!
Click to expand...
Click to collapse
I just tried Alpha 2 of xposed on my Manta. Still getting stuck on boot.
Using CM12 and Khaon Kernel
Alpha 2.. Running Logs filter, Xinstaller, media scanner optimizer, unified nlp, YouTube adaway.. Works fine.
Had it installed on CM12. Everything was working fine. I updated and it bootlooped. Whoops.
I had CF Lumen installed also so I'm not sure which one broke it. In recovery I wiped /system, flashed the rom, GAPPS, su (because it is better than CM12's), then xposed. Booted up fine and worked perfectly.
Did have to have a second reboot because of BBS/CF Lumen but that was expected.
Hmm. So you guys are on cm12 and xposed is working?
Weird.. How long does it take to boot after you flash xposed? Maybe i am not waiting long enough..
EDIT
Just recovered some storage from system partition using this. Flashed xposed and finally booted fine. I guess i was out of storage in my system partition
Thx and great work to Khaon!
usafle said:
I'm running Xposed with no issues on Purity ROM. Tried to use GEL Settings but that was a mess. Can't figure out a good configuration for my homescreen grids and icon sizes, etc..etc... Anyone have a suggestion about that?
I'd love to have some sort of fullscreen Zooper widget overlay on my homescreens but alas that kind of thing is above my abilities. Lol
Click to expand...
Click to collapse
My grid size is 5x7. I think that's a pretty good size for the screen.
Beaster said:
I just tried Alpha 2 of xposed on my Manta. Still getting stuck on boot.
Using CM12 and Khaon Kernel
Click to expand...
Click to collapse
reb1995 said:
Had it installed on CM12. Everything was working fine. I updated and it bootlooped. Whoops.
I had CF Lumen installed also so I'm not sure which one broke it. In recovery I wiped /system, flashed the rom, GAPPS, su (because it is better than CM12's), then xposed. Booted up fine and worked perfectly.
Did have to have a second reboot because of BBS/CF Lumen but that was expected.
Click to expand...
Click to collapse
Beaster said:
Hmm. So you guys are on cm12 and xposed is working?
Weird.. How long does it take to boot after you flash xposed? Maybe i am not waiting long enough..
EDIT
Just recovered some storage from system partition using this. Flashed xposed and finally booted fine. I guess i was out of storage in my system partition
Thx and great work to Khaon!
Click to expand...
Click to collapse
I had too many issues with CM12. But I switched to Dirty Unicorns (an AOSP based ROM) and have had zero issues.
jsgraphicart said:
My grid size is 5x7. I think that's a pretty good size for the screen.
Click to expand...
Click to collapse
I think I have mine set to around the same. Icon size dropped down to 90 to make those icons not so huge.
---------- Post added at 08:24 PM ---------- Previous post was at 08:23 PM ----------
Beaster said:
I just tried Alpha 2 of xposed on my Manta. Still getting stuck on boot.
Using CM12 and Khaon Kernel
Click to expand...
Click to collapse
Guess I better check to see what Alpha version I'm on. Didn't know there was an update
Exposed Nexus 10 success
I found I first had to install the partition "fix" to expand its size, then wipe cache/Davlik before it worked .
Can xposed give multi window function to nexus 10?
Does xposed work with stock 5.1.1 ROM ?
XxM4tzexX said:
Does xposed work with stock 5.1.1 ROM ?
Click to expand...
Click to collapse
It's work fine for me, I'm on stock 5.1.1.
Sent from my Nexus 5 using XDA Free mobile app
---------- Post added at 06:46 PM ---------- Previous post was at 06:46 PM ----------
id3alistic said:
Can xposed give multi window function to nexus 10?
Click to expand...
Click to collapse
The module for lollipop doesn't work properly yet.
Sent from my Nexus 5 using XDA Free mobile app
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
usafle said:
I think I have mine set to around the same. Icon size dropped down to 90 to make those icons not so huge.
---------- Post added at 08:24 PM ---------- Previous post was at 08:23 PM ----------
Guess I better check to see what Alpha version I'm on. Didn't know there was an update
Click to expand...
Click to collapse
If you're on 5.1.x use this http://forum.xda-developers.com/showthread.php?t=3072979
[ALPHA] [UNOFFICIAL] Xposed for Android 5.1 - API v64 / Alpha 4 / 20150514
Sent from my Nexus 5 using XDA Free mobile app
INFO About Me:
I have developed ROMs in the past for devices since the good old Windows Mobile days. I don't generally like to have very long opening posts for anything that I share with the public, I just like things to be simple and straight to the point. I more than likely will not ever have screenshots and banners all over the place because I am very old school about posting a ROM. I generally like my ROMs to be clean and dialed back on features since most of what's out there I will never use, also I do not build ROMs for you I build ROMs for me then share with you and I also only build for a device that I currently own and use as my daily driver.
INFO About JDM:
JDM is built on the idea of being a very clean "stock replacement" ROM with limited features for your Nexus device. This project is based off of the Android Open Source Project.
This ROM is pre-rooted (SuperSu) and you will need to flash a gapps packages, I use OpenGapps, but you may flash whatever you want. I found out that Layers will work with this rom, however I don't use it so support for it is solely on you.
----------
Developed by:
Jakdillard
----------
Device currently supported:
Nexus 6P
----------
INFO About Features:
- BusyBox
- SuperSU (pre-installed)
- Multi Window support
- Enabled native "dismiss all" button in Recent Apps
- No provisioned tethering
- Advanced Reboot Menu
- G-apps backup tool support
----------
DOWNLOAD:
https://www.androidfilehost.com/?fid=24459283995307462 Current Build: MHC19J.20160327
-----------
February 19th update discussion starts here:
http://forum.xda-developers.com/showpost.php?p=65416824&postcount=29
March 27th update discussion starts here:
http://forum.xda-developers.com/showpost.php?p=66077459&postcount=41
----------
Sources:
kernel: https://android.googlesource.com/device/huawei/angler-kernel
rom: https://android.googlesource.com/
my mods: https://github.com/jakdillard
----------
Thanks and Credits:
CyanogenMod
AOSPA
Chroma ROM
Android Open Source Project
Anybody who uses this
Cool. Downloading now
Thanks for your work
Sent from my Nexus 6P using Tapatalk
---------- Post added at 10:02 PM ---------- Previous post was at 09:57 PM ----------
I'm assuming gapps will have to be flashed separately?
Sent from my Nexus 6P using Tapatalk
Nasty_z said:
Cool. Downloading now
Thanks for your work
Sent from my Nexus 6P using Tapatalk
---------- Post added at 10:02 PM ---------- Previous post was at 09:57 PM ----------
I'm assuming gapps will have to be flashed separately?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Yes they will needed
sounds good
full layers support present?
pa.pn2 said:
sounds good
full layers support present?
Click to expand...
Click to collapse
Probably not I don't use any theming
Clean and light rom. I like it. Just a heads up, this rom is NOT rooted. Flash supersu to get it rooted
Sent from my Nexus 6P using Tapatalk
pa.pn2 said:
sounds good
full layers support present?
Click to expand...
Click to collapse
Layers is included in aosp, so there is probably support built in. Download layers manager and try!
jakdillard said:
Probably not I don't use any theming
Click to expand...
Click to collapse
Sent from my Nexus 6P using Tapatalk
I guess you recommend open gapps?
Giving this a try...looking forward to it will report back after flash
davwman said:
I guess you recommend open gapps?
Click to expand...
Click to collapse
I used opengapps micro. Work great
Sent from my Nexus 6P using Tapatalk
Nasty_z said:
Clean and light rom. I like it. Just a heads up, this rom is NOT rooted. Flash supersu to get it rooted
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
What version of SuperSU did you flash? v2.52?
one7dchevy said:
What version of SuperSU did you flash? v2.52?
Click to expand...
Click to collapse
That's what I always use. I don't do systemless.
Anyone know if this has force encryption or no?
Sent from my Nexus 6P
Anyone use Beans' Gapps?
And I'm curious if the Google Dialer Zip he made will work.
one7dchevy said:
What version of SuperSU did you flash? v2.52?
Click to expand...
Click to collapse
I used the stable one.
Found here: http://forum.xda-developers.com/showthread.php?t=1538053
Sent from my Nexus 6P using Tapatalk
Nasty_z said:
I used the stable one.
Found here: http://forum.xda-developers.com/showthread.php?t=1538053
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Thanks, didn't know there was another stable version out!
one7dchevy said:
Thanks, didn't know there was another stable version out!
Click to expand...
Click to collapse
For the record SuperSu v2.52 is fine. DU and a few other developers still use it in their roms they release.
Nobody knows whether this build has force encryption? Op? I'm thinking it hasn't been touched and still forces encryption as its not mentioned in the op.
Sent from my Nexus 6P
Layers confirmed working
Ah yeah I'm gonna have to touch that op up some, yeah I didn't disable encryption. I don't use root apps so I didn't root and the ROM is de-odexed user builds.
No SuperSU is fine with me. Same with encryption.
Super smooth with stock AK kernel and encryption disabled. Runs great, with great battery life.