Hi guys,
I've a problem : I installed the rom (RESURRECTION REMIX), wiped factory, install the GAPPS and i reboot but when i select my language then select my wifi with password, the phone say : wait minute whitout display anything.
I have same problem with Galaxy S2
Anyone got same problem?
Thanks a lot. (Sorry for language, i'm french)
I've used it for like 2 months with my XT1527 and I've never had a problem like that. Did you make a full wipe before installing?
Full wipe = Wipe System, Data, Cache and Dalvik
Agusyc said:
I've used it for like 2 months with my XT1527 and I've never had a problem like that. Did you make a full wipe before installing?
Full wipe = Wipe System, Data, Cache and Dalvik
Click to expand...
Click to collapse
Hi, thanks for reply !
Yup, always full wipe. using TWRP
But when i return to "PAC MAN ROM" everything works (first boot wifi include), but when i install the rom "RR", the first boot, when i go WIFI, it's checking and say "wait few minute" and its stuck...
Any idea? Thanks !
paulngn said:
Hi, thanks for reply !
Yup, always full wipe. using TWRP
But when i return to "PAC MAN ROM" everything works (first boot wifi include), but when i install the rom "RR", the first boot, when i go WIFI, it's checking and say "wait few minute" and its stuck...
Any idea? Thanks !
Click to expand...
Click to collapse
No, sorry. I've never had that problem with RR. Anyway, I prefer PAC-Rom, it has more functions.
Try downloading it from here:
Otus: https://www.androidfilehost.com/?fid=24269982087001089
Surnia: https://www.androidfilehost.com/?fid=24269982087001091
I have surnia, when I downloaded it, I did it from there.
Related
i had a problem after flashing the rom a backgroung picture came up and i could't se my on lock cirkle, and i can see other have the same problem, i went to recovery mode and did a full clean and flashed a gain and all problems solved..
Sorry for my english
Schoubrian said:
i had a problem after flashing the rom a backgroung picture came up and i could't se my on lock cirkle, and i can see other have the same problem, i went to recovery mode and did a full clean and flashed a gain and all problems solved..
Sorry for my english
Click to expand...
Click to collapse
My methods is always perform a factory reset , wipe cache & dalvik cache for clean installation before flashing any rom. Just flashed this rom and its working flawless! Really great job from nguyenxuanhoa :good::good::good:
Carson_ls said:
My methods is always perform a factory reset , wipe cache & dalvik cache for clean installation before flashing any rom. Just flashed this rom and its working flawless! Really great job from nguyenxuanhoa :good::good::good:
Click to expand...
Click to collapse
i did a factory reset and wipet cache & dalvik and all the things you should do but it failed the first time, but the second time its all good.
After flashing vanilla root box for the i9300 and the gapps I get this before I anything on the phone. "unfortunately, the process android.process.acore has stopped". comes up. It give me to option to report or ok.what should I do?
hey man,
you should just go to Manage Applications and and clear the data+cache contacts and contact storage.
be sure that you have backup for your contacts or make sure their stored at your gmail.
GL !
after flashing rom and gapss .. you must wipe data/factory reset and then reboot.
Hi man,
It's not true...even at the official thread of the vanilla
CheerS
You only need to wipe when switching Rom or upgrade to another Android version
You should however wipe whenever you get unexplainable problems
You have to clear cache and dalvick after flashing gapps
yes, but before flashing another rom, not after
eytan123 said:
yes, but before flashing another rom, not after
Click to expand...
Click to collapse
Nope, check the installation instructions for Vanilla Rootbox, it says to clear cache/dalvick after flashing gapps. The same goes for any other ROM.
i was answering for the who said you need to wipe after flashing ROM not gapps.
and for the gapps enough to wipe only the dalvik and you don't need to factory reset the device. The same goes for any other ROM.
eytan123 said:
i was answering for the who said you need to wipe after flashing ROM not gapps.
and for the gapps enough to wipe only the dalvik and you don't need to factory reset the device. The same goes for any other ROM.
Click to expand...
Click to collapse
Some ROMs do recommend doing a full wipe before installing the ROM and after flashing gapps. Cyanogenmod recommends it for those who are flashing it for the first time
hi people
I use the rom already 4 months,
how can i change the background in the settings
I use latest rom 3.7.1!
Sorry post makes no sense .
jje
better?
my english is not so good... sorry :/
So I desperately need help here! Using a GT-i9300 here.
Been at this for like 7 hours or so.
Was running a 4.1.2 rom for quite a while, thought I'd bump it up to 4.4.2 today.
Was thinking about flashing Resurrection Remix rom, so did the usual downloaded the files but noticed somewhere you need a 4.2.2 or above rom already in use to be flashing a 4.4.2. So went to S4 revolution rom (4.2.2). Then decided to flash the 4.4.2 rom.
Did the usual, data wipe, cache wipe, dalvik cache wipe. Flashed the rom. Then Gapps.
Now here's the messed up part, after flashing the phone would boot to the Rom logo. And it hasn't moved since. Thought something was up, flashed it again, did the take battery out thing also.
Thought it would be a ROM problem, so flashed 2 other roms. Neat rom and Gummy rom. Same result.
The 4.2.2 rom is working btw. So any ideas?!
Please! Reallly want the 4.4.2
Thank you!
Prosilicus said:
So I desperately need help here! Using a GT-i9300 here.
Been at this for like 7 hours or so.
Was running a 4.1.2 rom for quite a while, thought I'd bump it up to 4.4.2 today.
Was thinking about flashing Resurrection Remix rom, so did the usual downloaded the files but noticed somewhere you need a 4.2.2 or above rom already in use to be flashing a 4.4.2. So went to S4 revolution rom (4.2.2). Then decided to flash the 4.4.2 rom.
Did the usual, data wipe, cache wipe, dalvik cache wipe. Flashed the rom. Then Gapps.
Now here's the messed up part, after flashing the phone would boot to the Rom logo. And it hasn't moved since. Thought something was up, flashed it again, did the take battery out thing also.
Thought it would be a ROM problem, so flashed 2 other roms. Neat rom and Gummy rom. Same result.
The 4.2.2 rom is working btw. So any ideas?!
Please! Reallly want the 4.4.2
Thank you!
Click to expand...
Click to collapse
Please read the RR thread again. You need a full wipe for it to work. Try a 4.3-based Rom like Omega and then search XDA on how to do a FULL wipe. Then proceed with RR.
~ RazorMC
RazorMC said:
Please read the RR thread again. You need a full wipe for it to work. Try a 4.3-based Rom like Omega and then search XDA on how to do a FULL wipe. Then proceed with RR.
~ RazorMC
Click to expand...
Click to collapse
Thanks for the reply. But could you please elaborate on how to do a full wipe? Kind of a newbie to all this. Thanks!
Prosilicus said:
Thanks for the reply. But could you please elaborate on how to do a full wipe? Kind of a newbie to all this. Thanks!
Click to expand...
Click to collapse
Sorry, I've forgotten the link to the method. Maybe someone else can also shed light on this matter.
But if I remember:
- Wipe Cache,
- Wipe dalvik,
- format /system,
- format /data,
- format /cache.
- Then install the Rom.zip.
PS: Don't do "format /data and /data/media" section or it will delete everything on the internal SD. If you do this, make sure you have an external SD with a ROM placed in it (don't wipe this too) otherwise you will end up in a very difficult situation like i did
~ RazorMC
RazorMC said:
Sorry, I've forgotten the link to the method. Maybe someone else can also shed light on this matter.
But if I remember:
- Wipe Cache,
- Wipe dalvik,
- format /system,
- format /data,
- format /cache.
- Then install the Rom.zip.
PS: Don't do "format /data and /data/media" section or it will delete everything on the internal SD. If you do this, make sure you have an external SD with a ROM placed in it (don't wipe this too) otherwise you will end up in a very difficult situation like i did
~ RazorMC
Click to expand...
Click to collapse
If I am not wrong, formatting data will not erase the root directory. Where u put the rom zip. But just have an ext sd card just for safety.
Sent from my GT-I9300 using xda app-developers app
JellyYogurt said:
If I am not wrong, formatting data will not erase the root directory. Where u put the rom zip. But just have an ext sd card just for safety.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
You're right. "format /data" does not erase the root directoy. But I found "format /data and /data/media and /sdcard" option deleted everything on my S3 and even adb sideload failed for me after selecting it. After that I had to reflash stock via Odin.
+1 to ext SD
~ RazorMC
Usually I would just flash the mega wipe zip to get the device clean (only leaves ext. sd) and then start reflashing from scratch. I find it easier than doing it manually in recovery.
@RazorMC @JellyYogurt
Hey! Sorry got a bit busy but just got around to what you all recommened today and it's still no use.
Did everything this time.
First, I tried flashing the RR rom with the full wipe as you said. Oh and I'm using CWM 6.0.4.7
- Moved the zip file to ext SD
- wipe data
- wipe cache
-wipe dalvik cache
- format /system,
- format /data,
- format /cache.
During this got a status 6 error with the RR rom and I had put a Gummy Rom (4.4.2) just in case so tried the same process with this also but got a status 7 error with this one.
Left both, downloaded CM 11. Did the same process while on the 4.2.2 rom with it. This got stuck on the boot screen. Like the CM logo was going around for 30 minutes.
Finally when I couldnt tolerate it, removed battery, moved to 4.2.2 again and downloaded a 4.3 rom. Again, CM.
You wouldnt believe this but this also didnt work! This got stuck on the same thing. CM logo is still flashing around. Been watching this for 20 minutes now.
So, you guys got any ideas? Really pissing off.
Btw, thanks for the previous replies )
Oh and btw, would it matter if I didnt flash gapps after flashing the rom?
Those are just for the Google services and not related to whether the rom is booting up to home screen right?
Prosilicus said:
Oh and btw, would it matter if I didnt flash gapps after flashing the rom?
Those are just for the Google services and not related to whether the rom is booting up to home screen right?
Click to expand...
Click to collapse
Try other recoveries to see if problem still there try latest PhilZ recovery (this as a setting for wiping and installing new roms)..if that does not work try twrp recovery..
No you don't have to flash gapps after flashing you can do that later..
Prosilicus said:
@RazorMC @JellyYogurt
Hey! Sorry got a bit busy but just got around to what you all recommened today and it's still no use.
Did everything this time.
First, I tried flashing the RR rom with the full wipe as you said. Oh and I'm using CWM 6.0.4.7
- Moved the zip file to ext SD
- wipe data
- wipe cache
-wipe dalvik cache
- format /system,
- format /data,
- format /cache.
During this got a status 6 error with the RR rom and I had put a Gummy Rom (4.4.2) just in case so tried the same process with this also but got a status 7 error with this one.
Left both, downloaded CM 11. Did the same process while on the 4.2.2 rom with it. This got stuck on the boot screen. Like the CM logo was going around for 30 minutes.
Finally when I couldnt tolerate it, removed battery, moved to 4.2.2 again and downloaded a 4.3 rom. Again, CM.
You wouldnt believe this but this also didnt work! This got stuck on the same thing. CM logo is still flashing around. Been watching this for 20 minutes now.
So, you guys got any ideas? Really pissing off.
Btw, thanks for the previous replies )
Click to expand...
Click to collapse
Try a stock-based 4.3 like omega rom after flashing stock 4.1.2
Use Philz Recovery like tallman43 said. I prefer that over others.
If it doesn't work then maybe there's some compatibility issues.
~ RazorMC
HI.
I've changed roms before countless times, but now I'm trying to install a 4.4.2 rom on my Galaxy S3, and I have some problems. The installation (flash) passes with no problems, but after that, the phone won't boot. It sticks on whatever the rom's boot animation is. I've tried to wipe data, cache, wipe dalvik after this but it's still not working. Before I flash every rom, I do a factory reset, wipe the dalvik cache, and format system. I've tried with 15+ 4.4.X roms, and these are some of them: CyanogenMod, OmniROM, SlimKat, AOKP, Pacman and so on. As I said, I've flashed roms before a lot of times, without any problem. Only 4.4+ roms wont work. I tried to change the recovery, still the same result. I flash gapps with every rom too. Any idea what can be causing the problem? I'm using the latest Clockwork recovery, Sorry for my bad english and thanks.
divoom12 said:
HI.
I've changed roms before countless times, but now I'm trying to install a 4.4.2 rom on my Galaxy S3, and I have some problems. The installation (flash) passes with no problems, but after that, the phone won't boot. It sticks on whatever the rom's boot animation is. I've tried to wipe data, cache, wipe dalvik after this but it's still not working. Before I flash every rom, I do a factory reset, wipe the dalvik cache, and format system. I've tried with 15+ 4.4.X roms, and these are some of them: CyanogenMod, OmniROM, SlimKat, AOKP, Pacman and so on. As I said, I've flashed roms before a lot of times, without any problem. Only 4.4+ roms wont work. I tried to change the recovery, still the same result. I flash gapps with every rom too. Any idea what can be causing the problem? I'm using the latest Clockwork recovery, Sorry for my bad english and thanks.
Click to expand...
Click to collapse
Format data and system and cache (full wipe) also intstall the rom then boot it then flash gapps after see if that helps.
tallman43 said:
Format data and system and cache (full wipe) also intstall the rom then boot it then flash gapps after see if that helps.
Click to expand...
Click to collapse
I've already done that every time. As I said - Its not my first time flashing roms on my device. I know how to fix the general errors. This is something unusual tho.
Hey
When it bootloops, have you tried to goto recovery and see what us the cwm version??
Also try re-flashing the ROM without wipes..
Sent from my GT-I9300 using xda app-developers app
I just flashed EHNDROIX V (based on CynogenMod 4.4.2 KitKat) last night and it worked just fine.
Rooted the device with Odin, install TWRP from playstore, install TWRP recovery from TWRP, clean dalvik, clean data, clean cache, flash ROM and then flash Gapps (spesific Gapps for the ROM) and voila it worked right away.
Note:
You see, I am not using CWM but TWRP. I dunno if CWM is the one causing the problem.
Most of the weird flashing issues are due to the recovery used, you could also try the latest version of Philz recovery which has an option to wipe for new firmware.
Sent from my GT-I9300 using Tapatalk
divoom12 said:
I've already done that every time. As I said - Its not my first time flashing roms on my device. I know how to fix the general errors. This is something unusual tho.
Click to expand...
Click to collapse
Quote " Before I flash every rom, I do a factory reset, wipe the dalvik cache, and format system" You said nothing about formatting data that is why i suggested it! Next time please include all details on how you flashed the rom then It cuts down on useless post's like mine
Like everybody suggested try a different recovery ( latest one) which if you have flashed roms many times before you should have done anyway
Thanks guys, but I've already tried these things. CWM, TWRP and three other recoveries (not famous ones) haven't been able to help.
divoom12 said:
Thanks guys, but I've already tried these things. CWM, TWRP and three other recoveries (not famous ones) haven't been able to help.
Click to expand...
Click to collapse
If a rom is stuck in a loop, I would go to recovery and wipe dalvik and wipe data then reboot into same rom. This has worked for me when I've been stuck after a flash.
~ RazorMC
RazorMC said:
If a rom is stuck in a loop, I would go to recovery and wipe dalvik and wipe data then reboot into same rom. This has worked for me when I've been stuck after a flash.
~ RazorMC
Click to expand...
Click to collapse
I said that I've already done that in my First post.
divoom12 said:
HI.
I've changed roms before countless times, but now I'm trying to install a 4.4.2 rom on my Galaxy S3, and I have some problems. The installation (flash) passes with no problems, but after that, the phone won't boot. It sticks on whatever the rom's boot animation is. I've tried to wipe data, cache, wipe dalvik after this but it's still not working. Before I flash every rom, I do a factory reset, wipe the dalvik cache, and format system. I've tried with 15+ 4.4.X roms, and these are some of them: CyanogenMod, OmniROM, SlimKat, AOKP, Pacman and so on. As I said, I've flashed roms before a lot of times, without any problem. Only 4.4+ roms wont work. I tried to change the recovery, still the same result. I flash gapps with every rom too. Any idea what can be causing the problem? I'm using the latest Clockwork recovery, Sorry for my bad english and thanks.
Click to expand...
Click to collapse
Did you update your bootloader? When I flashed 4.4.2 from 4.4.1 on my s3, I had to update mine to get it to work. http://forum.xda-developers.com/showthread.php?t=2321310 hope this helps.
Sent from my unknown using XDA Premium 4 mobile app
Hi,
My problem is that I can not install any gapps on my GT-I9300 I have fleshed it with many different version of custom ROM, using android 7, 7.1, 6 and 5.1. Unfortunately regardless of the version of the gapps (nano or stock) installation ends up with error that google apps stopped working. The gaps version is correct for given android version. When I flash ROM only - no gapps - the phone usually works fine but only on Android v5.
When I try ver 6 ROM flash does not even start. With ver 5.1 it flashes but then get some apps error.
Any suggestions or idea? What can goes wrong? Where to start troubleshooting ? On the stock firmware the phone was working fine.
Thx for help
Did you clean flash it, like proper format data. And what rom are you using?
Sly Fox007 said:
Did you clean flash it, like proper format data. And what rom are you using?
Click to expand...
Click to collapse
I tried at least 7 different ROMs. Before I flash, I run wipe data/factory reset then cache partition and dalvik cache at the end.
valuss said:
I tried at least 7 different ROMs. Before I flash, I run wipe data/factory reset then cache partition and dalvik cache at the end.
Click to expand...
Click to collapse
I'll ask you again, did you format data which in the the advance wipe section. And also what version TWRP and opengapps are you using?
Sly Fox007 said:
I'll ask you again, did you format data which in the the advance wipe section. And also what version TWRP and opengapps are you using?
Click to expand...
Click to collapse
Sly Fox007. Now I'm not sure if I format the data correctly. I use ClockwordMod Recovery v6.0.1.2 not TWRP. Is this a possible source of my problem?
valuss said:
Sly Fox007. Now I'm not sure if I format the data correctly. I use ClockwordMod Recovery v6.0.1.2 not TWRP. Is this a possible source of my problem?
Click to expand...
Click to collapse
Sly Fox007 - you directed me towards the solution. I have installed TWRP and installed all with no issues!
Thx.