Overview
This is TWRP install tool for bootloader 'locked' M4 Aqua.
It's checked operation at E2363 26.1.B.1.85, 26.1.B.2.147, and 26.1.B.3.109
Requirements
Windows as host machine
ADB environment(can run adb shell)
Rooted M4 Aqua device(not need BL unlock)
Unzip tool
Works
Touch operation
Mount some partition(system, data, cache, external SD, etc...)
Backup and restore
Install zip
ADB access
MTP transfer
Various settings
Not works
Reboot to Recovery
/firmware mount(shown error, but no actual harm)
How to install
Unzip M4Aqua-lockedTWRP-xxx-installer.zip
Run install.bat
How to boot TWRP
Power on
When LED light cyan, click volume-down button
LED change magenta, and then TWRP start
Download
M4Aqua-lockedTWRP-0.1-installer
https://www.dropbox.com/s/jj30za1my5f451t/M4Aqua-lockedTWRP-0.1-installer.zip?dl=0
https://goo.gl/4iN07G (mirror)
Reference
rootkitXperia_E23xx_26.1.X.3.xxx
https://goo.gl/cGvXSA
For BL Locked M4 Aqua
For Windows as host machine
Require ADB environment(can run adb shell)
Works on FW 26.1.B.3.109, maybe neighbor FW(for example E2303 26.1.A.3.111)
Unzip rootkitXperia_E23xx_26.1.X.3.xxx.zip, and run install.bat
Sometimes failed, at that time try more time
rootkitXperia_E23xx_26.1.X.2.xxx
https://goo.gl/VxG4S7
For 26.1.X.2.xxx
rootkitXperia_E23xx
https://www.dropbox.com/s/edse0h6b02odzn1/rootkitXperia_E23xx.zip?dl=0
https://goo.gl/RuwCzE(mirror)
For BL Locked M4 Aqua
For Windows as host machine
Require ADB environment(can run adb shell)
Works on FW 26.1.x.1.85, maybe neighbor FW(There is report that it works on E2306 26.1.A.1.112)
Maybe works on FW 26.1.x.1.x, not works on 26.1.x.2.x
Unzip rootkitXperia_E23xx.zip, and run install.bat
Sometimes failed, at that time try more time
twrp_prerooted_M4.zip
https://www.dropbox.com/s/z0tgziwx8epdu38/twrp_prerooted_M4.zip?dl=0
https://goo.gl/2gwehF(mirror)
This is FW update tool keeping rooted(for example, from 26.1.B.1.85 to 26.1.B.2.147, from 26.1.A.1.112 to 26.1.A.2.167)
Works on TWRP
First, prepare target ftf(lollipop)
Extract kernel.sin and system.sin from ftf
Convert kernel and system by using Flashtool, and get kernel.elf and system.ext4
Add kerel.elf and system.ext4 to twrp_prerooted_M4.zip
Install zip on TWRP
Special thanks
tonystark88 for this TWRP based on BLUL TWRP ramdisk
[NUT] for process of booting recovery at BL locked device(XZDualRecovery)
@schisteux for testing operation
@x0nao0x for testing operation
Can i use too on unlocked bl? Beacause TWRP for unlocked cant Mount external sd card..
FirstMn said:
Can i use too on unlocked bl? Beacause TWRP for unlocked cant Mount external sd card..
Click to expand...
Click to collapse
Probably you can.
Try it.
FirstMn said:
Can i use too on unlocked bl? Beacause TWRP for unlocked cant Mount external sd card..
Click to expand...
Click to collapse
TWRP for unlocked bootloader work nice, also external sd card
---------- Post added at 06:28 PM ---------- Previous post was at 06:23 PM ----------
I made my first backup with this recovery locked bootloader. Thanks!
Someone has tried to restore? Well?
It works perfectly in the Xperia M4 Aqua Single Sim E2306 , compilation 23.1.A.1.112
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Waiting for the version 167 for e2306
alonso444 said:
Waiting for the version 167 for e2306
Click to expand...
Click to collapse
You can update from 26.1.A.1.112 to 26.1.A.2.167 by using twrp_prerooted_M4.zip.
At First, flash 26.1.A.1.112 FW by using Flashtool.
Get root by using rootkitXperia_E23xx.
Install TWRP.
Install twrp_prerooted_M4.zip include kernel.elf/system.ext4 of 26.1.A.2.167 on TWRP.
Which firmware should I flash on M4 aqua e2303 for root to work ??
Sent from my E2303 using Tapatalk
Hitman951 said:
Which firmware should I flash on M4 aqua e2303 for root to work ??
Sent from my E2303 using Tapatalk
Click to expand...
Click to collapse
Try 26.1.A.1.128.
cubeundcube said:
Try 26.1.A.1.128.
Click to expand...
Click to collapse
The TWRP will cause some conflict when the 6.0 (ftf) update come? Or it won't cause any trouble in future?
Thanks for this awesome work!
Hawknelli said:
The TWRP will cause some conflict when the 6.0 (ftf) update come? Or it won't cause any trouble in future?
Thanks for this awesome work!
Click to expand...
Click to collapse
I'll consider it when the time come.
cubeundcube said:
I'll consider it when the time come.
Click to expand...
Click to collapse
So, it's better wait to 6.0 update come or can i will remove TWRP?
I want to use TWRP for pre-root .147 (E2363), but i am worried if TWRP will mess up in the future when i flash 6.0 via Flashtool.
Hawknelli said:
So, it's better wait to 6.0 update come or can i will remove TWRP?
I want to use TWRP for pre-root .147 (E2363), but i am worried if TWRP will mess up in the future when i flash 6.0 via Flashtool.
Click to expand...
Click to collapse
Don't worry.
To flashing system by using Flashtool, All custom is deleted.
cubeundcube said:
Don't worry.
To flashing system by using Flashtool, All custom is deleted.
Click to expand...
Click to collapse
Using the tutorial, mine update the system via TWRP, but SuperSU isn't installed.
Hawknelli said:
Using the tutorial, mine update the system via TWRP, but SuperSU isn't installed.
Click to expand...
Click to collapse
Did you make prerooted-zip correctly?
Download twrp_prerooted_M4.zip and keep.
Use latest version of Flashtool(0.9.19.10)
(On Flashtool)Tools->Sin Editor, Select kernel.sin, push 'Extract data', and then kernel.elf is made.
Similarly, select system.sin, push 'Extract data', and then system.ext4 is made.
Using like 7-zip tool, Add kernel.elf and system.ext4 to twrp_prerooted_M4.zip.
Install twrp_prerooted_M4.zip via TWRP.
Hawknelli said:
Using the tutorial, mine update the system via TWRP, but SuperSU isn't installed.
Click to expand...
Click to collapse
Same problem as you, using winrar for to do the zip. Flash ftf and root again, but the second time, after error I flashed supersu.zip and now Ok.
I just read is better using 7zip...
Enviado desde mi E2303 mediante Tapatalk
---------- Post added at 02:02 PM ---------- Previous post was at 02:00 PM ----------
Root done with . 167 thanks for this excellent work.
Enviado desde mi E2303 mediante Tapatalk
Tested 'rootkitXperia_E23xx' but no success on E2312 / .147. Reflashed to .85 and working fine..BTW,hit thanks for the good job and will waiting for good news for this variant from you :highfive: .
Is it necessary to do a full wipe, downgrade from the latest FW release to root, or is there a way of doing it without losing all apps and and data?
Before to make the zip for upgrade system it's possible unpack system.ext4 delete some apps and repack again? How?
Enviado desde mi E2303 mediante Tapatalk
jobrima said:
Before to make the zip for upgrade system it's possible unpack system.ext4 delete some apps and repack again? How?
Enviado desde mi E2303 mediante Tapatalk
Click to expand...
Click to collapse
Yes, im also tyring to figue this out, I was reading flashtool can extract system.sin to yaffs and you can do it, but I get a raw file. Think it work like that on kitkat but not lollipop
Related
Disclaimer
Code:
/*
* You may void your warranty.
* I am not responsible for bricked devices or dead SD cards.
* Please do some research if you have any concerns about this kernel.
* YOU are choosing to make these modifications to your device.
* I absolutely disclaim all the responsibilities.
[COLOR="Red"] * Flashing kernel requires unlocked bootloader.
[/COLOR] * You can unlock your bootloader from [URL="http://unlockbootloader.sonymobile.com/"][COLOR="Blue"][U]here[/U][/COLOR][/URL].
*/
Features :-
Code:
* zImage from stock 12.0.A.1.211 FW
* Insecure ramdisk
* Autoroot with latest su binary
* init.d support
* Auto-Install busybox
* /rootfs and /system mounted as rw
* Persistent adb
* ro.allow.mock.location=1
* CWM ( Coming Soon )
[/B]
Code:
[CENTER]PROCEDURE : [COLOR="Red"]fastboot flash boot kernel.elf[/COLOR][/CENTER]
Code:
[CENTER]CODENAME OF XPERIA SP : [COLOR="Red"]HUASHAN[/COLOR][/CENTER]
Code:
[center][U]
[URL="http://www.mediafire.com/?jget4vsq9zuv7"][COLOR="BROWN"] Download Kernel [/COLOR][/URL][/center][/U]
Credits: DooMLoRD : For his initial work on autoroot script
Click to expand...
Click to collapse
Thanks.Will test it soon! Awesome!
It is hard to find the topic
I am looking forward to your kernel
Sent from my C5302 using xda app-developers app
Mods, Please create a new forum for XSP.. Plz plz plz...
adb driver
When i try to put the phone in fastboot the S1 boot device shows exclamation mark.....when i try to manually update the adb driver the only ones in the list are Sony sa0102 to Sony sa0108 and so0101 i'm not sure which one to choose???? any help......or can someone pls upload the adb driver for xsp
I found a bug
Today I update to Xperia SP (C5303)_12.0.A.1.257_HK by flashtool.
Then I flash this kernel and Successfully boot but there is no autoroot.
There is the 257‘s kernel
https://docs.google.com/file/d/0BxpGRWaDxv0ZZ3hiQVFaUV9PYkU/edit?usp=sharing
某龙兄 said:
I found a bug
Today I update to Xperia SP (C5303)_12.0.A.1.257_HK by flashtool.
Then I flash this kernel and Successfully boot but there is no autoroot.
There is the 257‘s kernel
https://docs.google.com/file/d/0BxpGRWaDxv0ZZ3hiQVFaUV9PYkU/edit?usp=sharing
Click to expand...
Click to collapse
Flashtool ? Flashtool doesn't have SP support yet.
When you update, your existing data remains. So when kernel runs autoroot, it checks for a marker file. If not found it'll push su. Otherwise not. Simply check for a file root- veng in /system or /data/local/tmp ( I forgot exact location ). Delete it and reboot. It'll push su again.
You should have deleted marker file before OTA update.
Sent from my ST26i using xda app-developers app
Rachit Rawat said:
Flashtool ? Flashtool doesn't have SP support yet.
When you update, your existing data remains. So when kernel runs autoroot, it checks for a marker file. If not found it'll push su. Otherwise not. Simply check for a file root- veng in /system or /data/local/tmp ( I forgot exact location ). Delete it and reboot. It'll push su again.
You should have deleted marker file before OTA update.
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
DooMLoRD tell me in fact flashtool support XSP.Just install the Xperia Z driver.
I successfully flash 257ftf by flashtool
But I do not have root now.I cant read /data and write /system
---------- Post added at 05:09 PM ---------- Previous post was at 05:02 PM ----------
Rachit Rawat said:
Flashtool ? Flashtool doesn't have SP support yet.
When you update, your existing data remains. So when kernel runs autoroot, it checks for a marker file. If not found it'll push su. Otherwise not. Simply check for a file root- veng in /system or /data/local/tmp ( I forgot exact location ). Delete it and reboot. It'll push su again.
You should have deleted marker file before OTA update.
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
IF through the flashtool,system must be wipe.
Well, I try to wipe data.
---------- Post added at 05:24 PM ---------- Previous post was at 05:09 PM ----------
Rachit Rawat said:
Flashtool ? Flashtool doesn't have SP support yet.
When you update, your existing data remains. So when kernel runs autoroot, it checks for a marker file. If not found it'll push su. Otherwise not. Simply check for a file root- veng in /system or /data/local/tmp ( I forgot exact location ). Delete it and reboot. It'll push su again.
You should have deleted marker file before OTA update.
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
Okay I successfully root after I wipe data.
I look forward to adding CWM
Sorry for my poor bad English and thank a lot
Ok. Wipe data is generally checked on flashtool
How to add a new C530X device to Flashtool
option: Download C530X.rar archive, unzip and copy the folder C530X in the directory \ Flashtool \ devices \
Download: View attachment C530X.rar
or
option: Download C530X.ftd.rar archive, unzip and copy the file C530X.ftd to the directory \ Flashtool \ devices \. Then in Flashtool make Devices - Manage - Import and double-click to add a device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Download: View attachment C530X.ftd.rar
nevermind, finally got it working using my windows 7 machine.
thanks alot OP for creating this.
dogsly said:
How to add a new C530X device to Flashtool
option: Download C530X.rar archive, unzip and copy the folder C530X in the directory \ Flashtool \ devices \
Download: View attachment 1960949
or
option: Download C530X.ftd.rar archive, unzip and copy the file C530X.ftd to the directory \ Flashtool \ devices \. Then in Flashtool make Devices - Manage - Import and double-click to add a device
Download: View attachment 1960950
Click to expand...
Click to collapse
i have already added SP support in FlashTool
you will get inbuilt support in next final release... till then use the FlashTool which we release for Xperia Z...
DooMLoRD said:
i have already added SP support in FlashTool
you will get inbuilt support in next final release... till then use the FlashTool which we release for Xperia Z...
Click to expand...
Click to collapse
Great news! We will be looking forward to the new version of FlashTool
Kernel's Working
guyz, how to check whether the xperia sp using the standard boot image like xperia z and not xperia t. Where for xperia t sony bundle the kernel with recovery?
Hey guys can anyone post a detailed guide on how to flash this kernel via fastboot. I had a samsung earlier and it was pretty easy to play with it but since I'm new to Sony I need help. Thanks.
[email protected] said:
Hey guys can anyone post a detailed guide on how to flash this kernel via fastboot. I had a samsung earlier and it was pretty easy to play with it but since I'm new to Sony I need help. Thanks.
Click to expand...
Click to collapse
First, unlock your phone bootloader at sony official website where you will lose the warranty of your phone. Then install your phone usb driver, use sony update service or pc companion.
Then, turn off your phone and connect it to the pc using usb while pressing vol up button. Go to the command prompt with fastboot utilities downloaded from sony website, follow the instructions and type these
fastboot flash boot kernel.elf
Click to expand...
Click to collapse
on the command prompt.
Can I flash this kernel to .237 firmware?
luutuananh said:
Can I flash this kernel to .237 firmware?
Click to expand...
Click to collapse
Yes,you can
Hey all, just to let you know I tried this on my C5303 and it works great.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
Flashtool 0.9.13 by @Androxyde
XZDualRecovery 2.7.43 BETA or newer.
Current rooted FW version: 14.1.B.1.532 or 14.1.B.2.257.
Special features:
SuperSU integrated in system, FULL ROOT!
XZDualRecovery 2.7.75 BETA (CWM & PhilZ Touch & TWRP) pre-installed;
init.d support (read how to enable)
For both locked and unlocked bootloaders!
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
If you are unable to download torrent files directly, have http://zbigz.com/ do it for you!
How to update to 14.2.A.0.290:
Files:
For C6802: Download C6802_14.2.A.0.290.flashable.zip (Bittorrent: 842MB) and C6802_14.2.A.0.290_Stripped.ftf (21MB)
For C6806: Download C6806_14.2.A.0.290.flashable.zip (Bittorrent: 815MB) and C6806_14.2.A.0.290_Stripped.ftf (21MB)
For C6833: Download C6833_14.2.A.0.290.flashable.zip (Bittorrent: 760MB) and C6833_14.2.A.0.290_Stripped.ftf (21MB)
Save them somewhere you remember;
Due to a little bug inside the updater-script, you need to follow the guide in this post to make sure flashing it works OK. (Only if you downloaded the older version)
Put 'C68XX_14.2.A.0.290.flashable.zip' on (the external) SDcard1;
Put 'C68XX_14.2.A.0.290_Stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in TWRP and don't forget to backup the contents of 'SDCard' (the internal storage!);
Install XZDualRecovery 2.7.74 or newer from PC.
In TWRP -> Wipe -> advanced Wipe Tick/Check:
Dalvik-Cache
System
Cache
Data
Then 'Swipe to Right' to make it happen and go back to the TWRP home screen;
Flash 'C68XX_14.2.A.0.290.flashable.zip' in TWRP;
NOTE: do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C68XX_14.2.A.0.290_Stripped.ftf';
Now reboot to system;
Once you get to the language select screen, reboot to TWRP (no need to finish the guide);
Restore the backup of DATA only, when done go back to the TWRP home screen;
In TWRP -> Wipe -> advanced Wipe Tick/Check Dalvik-cache;
Reboot to system.
The first boot will be slow and after a long wait at the boot animation you will see Android start optimizing the apps on your phone.
Video Guide:
NOTE: This guide is based on an older guide for the Xperia Z1 which has since been updated a few times, but it will give you a general idea.
shem2409 said:
Click to expand...
Click to collapse
Enjoy! :fingers-crossed:
Known XZDualRecovery Issues:
Busybox Updater/Installer: If you have XZDualRecovery installed, un-install any Busybox updating app/tool as most if not all of them will install a version of busybox which does not support the lzma compression applets XZDualRecovery depends on. The version installed together with XZDualRecovery is very stable and I have yet to hear anyone complain about it's stability.
How to report errors:
Please, before shouting out "It doesn't work!!1!" or "I lost root!" or even "My phone reboots when remounting /system RW!!" try the following:
Restore any JB 4.2.2 FTF using any means you are familiar with so you can try again.
Root it using any means you are familiar with.
Install XZDualRecovery and then try to update again using TWRP.
If it still fails something from there on: LOGS!!.
NOTE: The important ones can be found in /cache/recovery and in /sdcard1/XZDualRecovery, pack them up and send them to me or attach them to your bug report.
Thank you
XDA:DevDB Information
[STOCK][4.3] Update to 14.2.A.0.290 [Root & XZDR][LB/UB], a ROM for the Sony Xperia Z Ultra
Contributors
[NUT]
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 14.1.B.1.532 or 14.1.B.2.257
Based On: STOCK
Version Information
Status: Stable
Stable Release Date: 2014-01-18
Created 2014-01-16
Last Updated 2014-01-21
Tips and Tricks
Easy switching between locked and unlocked bootloader states!
NOTE: USE TWRP ONLY for this guide.
NOTE 2: You NEED to have XZDualRecovery 2.7.43 or higher to make this work.
Create a backup, including the Trim Area (TA!)
Unlock your bootloader
Restore backup without TA
Create a new backup of your UNLOCKED TA
Restore the previous TA backup to relock your phone.
Done :good:
Now you can switch between locked and unlocked bootloaders quick and painless: no more system wipes and you can basically do whatever you want
How to enable init.d support:
Open a filemanager app and navigate to the location where the XZDualRecovery folder is located and go in to it. Open XZDR.prop as a text file and set dr.initd.active to true.
NOTE: For this ROM it means the init.d script called 99SuperSUDaemon will kick in to action, so it's best to disable (by setting chmod 644) /system/etc/install-recovery.sh for the time being or to clear it's contents.
Done
Downgrading to a 4.2 ROM:
Download C6833_14.1.B.1.532_[NUT].ftf (Bittorrent: 760MB) and flash it using FlashTool. I've also added the FTF to the downloads page on the DevDB tab, this will allow straight downloads as well.
This FTF will allow you to downgrade to .532 without loss of your IMEI :good:
ROM Status: STABLE
Update 1:
C6802 ROM uploaded and seeding.
Update 2:
C6833 ROM uploaded and seeding.
Update 3:
C6806 ROM now uploading, FTF and torrent file links have been updated.
Update 4:
C6806 ROM uploaded and seeding.
Update 5:
A little bug has been discovered in the updater-script. To be able to flash the one you possibly have downloaded already, follow the instructions in this post to get it to work properly!
I will be updating the packages soon, in the mean time I have updated the OP guide to include this small fix.
Update 6:
Removed the files from the bit-torrent seeder. I'm currently uploading them again now. It will probably take about 30 minutes to finish that, will update again once completed and seeding again.
If you have already downloaded the package, make sure to read 'Update 5' with details on that how to fix yours.
Update 7:
Files have been replaced on the seeder box. There is no need to re-download them if you follow the guide pointed to by 'Update 5'.
Enjoy again!
Good work @[NUT] :thumbup:
sent from my monx®dified 6802 using Tapatalk
290 is it lte For C6833
Sent from my C6833 using XDA Premium 4 mobile app
jpeps said:
290 is it lte For C6833
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you have lte now, then that will be the same for this package
Yet another ROM! Great work, NUT!
Anyone who has tested it please do let me know. If you are unable to post here because you just registered on xda, feel free to PM me your experience!
Anyone who can upload both the c6802 files anywhere else as cant download from given links.
techpal said:
Anyone who can upload both the c6802 files anywhere else as cant download from given links.
Click to expand...
Click to collapse
Why?
Failed
Tried a few times to flash C6833_14.2.A.0.290.flashable.zip in TWRP, but each time it failed in the final step:
Code:
set_perm: some changes failed
E:Error in /sdcard/C6833_14.2.A.0.290.flashable.zip
(status 7)
So I decided to try the flashable zip from jackie099's thread, and that one was successful.
Djezpur said:
Tried a few times to flash C6833_14.2.A.0.290.flashable.zip in TWRP, but each time it failed in the final step:
Code:
set_perm: some changes failed
E:Error in /sdcard/C6833_14.2.A.0.290.flashable.zip
(status 7)
So I decided to try the flashable zip from jackie099's thread, and that one was successful.
Click to expand...
Click to collapse
Ah frack, because of this report, I just rechecked my edify script, and even though it was correct typo wise, it is trying to set permissions on a file which no longer exists in the package.
I'll redo the packages soon. Packages have been updated. If you have one downloaded already, follow this little guide to fix yours!
In the mean time, open the flashable ZIP in winzip or winrar, extract META-INF/com/google/android/updater-script
and remove this line:
Code:
set_perm(0, 0, 0644, "/system/bin/ramdisk.stock.cpio.lzma");
Put the updater-script back inside the zip, updating the one there. It should make it flash OK from there on.
Thanks for the report!
thanks for all your hard work! however, torrents do not download (understand dependent on other servers etc) hope someone can post these (C6833) Thanks
mac231us said:
thanks for all your hard work! however, torrents do not download (understand dependent on other servers etc) hope someone can post these (C6833) Thanks
Click to expand...
Click to collapse
Then your ISP is blocking them... or you are getting blocked by mine
Try http://zbigz.com to download the torrent file, they turn it in to a straight download for you.
[NUT] said:
Thanks for the report!
Click to expand...
Click to collapse
And thank you for providing a way to root .290 with a locked bootloader. :good:
Djezpur said:
And thank you for providing a way to root .290 with a locked bootloader. :good:
Click to expand...
Click to collapse
So, you fixed and flashed it and it's confirmed working?
I need that confirmation to change the Post 3 status
[NUT] said:
So, you fixed and flashed it and it's confirmed working?
I need that confirmation to change the Post 3 status
Click to expand...
Click to collapse
Yep, all is good now!
sorry for being a noob, but how to flash the stripped ftf part?
im thinking of using flashtool but im stuck on waiting for flashmode, saying i should press back button which we dont have. any help?
im stuck here
thanks before
Justin^Tan said:
sorry for being a noob, but how to flash the stripped ftf part?
im thinking of using flashtool but im stuck on waiting for flashmode, saying i should press back button which we dont have. any help?
im stuck here
thanks before
Click to expand...
Click to collapse
Set up flashtool to where it asks you to connect your phone:
Turn off your mobile, then hold Volume down while connecting your usb cable. It will then start flashing.
Holding volume up will put your device in to fastboot mode, FYI
ahh, volume down lol. great, that did the rick
thanks a lot NUT! appreciate your job hehe. great work
oh right, i still have the notification of OTA update to 290 after i flashing your ROM. is there any way to clear it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
Flashtool 0.9.13 by @Androxyde
XZDualRecovery 2.7.76 BETA or newer.
Current rooted FW version: 14.2.A.0.290 .
Special features:
SuperSU integrated in system, FULL ROOT!
XZDualRecovery 2.7.80 BETA (CWM & PhilZ Touch & TWRP) pre-installed;
init.d support (read how to enable)
For both locked and unlocked bootloaders!
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
If you are unable to download torrent files directly, have http://zbigz.com/ do it for you!
How to update to 14.2.A.1.136:
Files (Find the files in the DevDB Downloads tab!):
For C6802: Download C6802_14.2.A.1.136.flashable.zip (865MB) and C6802_14.2.A.1.136_Stripped.ftf (21MB)
For C6806: Download C6806_14.2.A.1.136.flashable.zip (838MB) and C6806_14.2.A.1.136_Stripped.ftf (21MB)
For C6833: Download C6833_14.2.A.1.136.flashable.zip (826MB) and C6833_14.2.A.1.136_Stripped.ftf (21MB)
For C6843: Download C6843_14.2.A.1.136.flashable.zip (871MB) and C6843_14.2.A.1.136_Stripped.ftf (21MB)
Save them somewhere you remember;
Put 'C68XX_14.2.A.1.136.flashable.zip' on (the external) SDcard1;
Put 'C68XX_14.2.A.1.136_Stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in TWRP and don't forget to backup the contents of 'SDCard' (the internal storage!);
Flash 'C68XX_14.2.A.1.136.flashable.zip' in TWRP;
NOTE: do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C68XX_14.2.A.1.136_Stripped.ftf' using flashtool;
Reboot to system.
The first boot will be slow and after some time at the boot animation you will see Android start optimizing the apps on your phone.
Enjoy! :laugh:
Known XZDualRecovery Issues:
Busybox Updater/Installer: If you have XZDualRecovery installed, un-install any Busybox updating app/tool as most if not all of them will install a version of busybox which does not support the lzma compression applets XZDualRecovery depends on. The version installed together with XZDualRecovery is very stable and I have yet to hear anyone complain about it's stability.
How to report errors:
Please, before shouting out "It doesn't work!!1!" or "I lost root!" or even "My phone reboots when remounting /system RW!!" try the following:
Restore any JB 4.2.2 FTF using any means you are familiar with so you can try again.
Root it using any means you are familiar with.
Install XZDualRecovery;
Update to 14.2.A.0.290;
Then try to update again using TWRP.
If it still fails something from there on: LOGS!!.
NOTE: The important ones can be found in /cache/recovery and in /sdcard1/XZDualRecovery, pack them up and send them to me or attach them to your bug report.
Thank you
XDA:DevDB Information
[STOCK][C68XX][4.3] Update to 14.2.A.1.136 [Root & XZDR][LB/UB][DE-/ODEX], ROM for the Sony Xperia Z Ultra
Contributors
[NUT]
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 14.2.A.0.290
Based On: STOCK
Version Information
Status: Abandoned
Created 2014-01-31
Last Updated 2014-08-26
Tips and Tricks
Easy switching between locked and unlocked bootloader states!
NOTE: USE TWRP ONLY for this guide.
NOTE 2: You NEED to have XZDualRecovery 2.7.43 or higher to make this work.
Create a backup, including the Trim Area (TA!)
Unlock your bootloader
Restore backup without TA
Create a new backup of your UNLOCKED TA
Restore the previous TA backup to relock your phone.
Done :good:
Now you can switch between locked and unlocked bootloaders quick and painless: no more system wipes and you can basically do whatever you want
How to enable init.d support:
Open a filemanager app and navigate to the location where the XZDualRecovery folder is located and go in to it. Open XZDR.prop as a text file and set dr.initd.active to true.
NOTE: For this ROM it means the init.d script called 99SuperSUDaemon will kick in to action, so it's best to disable (by setting chmod 644) /system/etc/install-recovery.sh for the time being or to clear it's contents.
Done
Downgrading to a 4.2 ROM:
Download C6833_14.1.B.1.532_[NUT].ftf (Bittorrent: 760MB) and flash it using FlashTool. I've also added the FTF to the downloads page on the DevDB tab, this will allow straight downloads as well.
This FTF will allow you to downgrade to .532 without loss of your IMEI :good:
ROM Status: STABLE
Files are available, enjoy people!
Anyone with an FTF for the C6802 and C6806, please DO share!
Thanks a lot, again!
Coming from .290 with locked bootloader, the upgrade was simple and smooth.
So far this ROM works like charm for me:good:
I'll add this to the guide I have written for those with a locked bootloader.
Excellent work [NUT]. Works great! Thanks also to Jackie (thread on general forum), blueether for guides to get to rooted 4.3 and NUT's 532 for the C6833. All super work, not to forget to mention so many others (LordManhattan), hamdogg etc.
Used the Xperia xposed apk someone posted forget where and got the extended power menu module loaded and working.
Guessing this is safe as well for 6802 right?
shaolin95 said:
Guessing this is safe as well for 6802 right?
Click to expand...
Click to collapse
I have no idea to be honest... But why not try it?
I'll release the C6802 version ASAP though, waiting for a ftf to surface...
mmmm I will wait for 6802!
Thanks though. :highfive:
shaolin95 said:
mmmm I will wait for 6802!
Thanks though. :highfive:
Click to expand...
Click to collapse
It will work fine, I'm using the 136 ftf for c6833 on my C6802.
The phone will think it is a c6833 with lte options etc
Thanks, [NUT], excellent work. Why don't you update the OP to state more explicitly that people coming from .290 can restore their data partitions from the backup? That would be useful to many.
Edit: Well, I read the OP more carefully, and it seems that this time we don't even need to wipe data, so there is no need to restore anything. Am I right?
Sent from my C6833 using XDA Premium 4 mobile app
stopa10 said:
Thanks, [NUT], excellent work. Why don't you update the OP to state more explicitly that people coming from .290 can restore their data partitions from the backup? That would be useful to many.
Edit: Well, I read the OP more carefully, and it seems that this time we don't even need to wipe data, so there is no need to restore anything. Am I right?
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Correct, this time it's a straight update
Just recieved my C6833. But already have 14.2.a.1.136 installed. Locked Bootloader and not rooted. how do I go about rooting this device?
muntaha_v3 said:
Just recieved my C6833... how do I go about rooting this device?
Click to expand...
Click to collapse
Read, read, read some more then...
read it all again
Start in the general section with lordmanhatton's guide, then my rooting guide for 136 and my downgrade guide, and a few of jackie099's and [NUT]'s threads then read them all again.
Then ask any questions you still have
Updated to 14.2.A.1.136 with replacing system.tgz to HK's one :victory:
This time the updater-script is correct :good:
Nagato Yuki said:
Updated to 14.2.A.1.136 with replacing system.tgz to HK's one :victory:
This time the updater-script is correct :good:
Click to expand...
Click to collapse
Yah, thanks again for pointing me on to that issue again :good:
Did this get updated from last night/yesterday? Also it says De-odex but in glancing at the system files, it appears odexed. Thanks.
mac231us said:
Did this get updated from last night/yesterday? Also it says De-odex but in glancing at the system files, it appears odexed. Thanks.
Click to expand...
Click to collapse
Whoops, it's a cut & paste error... This is 100% odex
Is ric disabled on here and what is ric. Btw I used this method and works 100% works on C6806.
Sent from my C6833 using XDA Premium HD app
cameljockey1 said:
Is ric disabled on here and what is ric. Btw I used this method and works 100% works on C6806.
Sent from my C6833 using XDA Premium HD app
Click to expand...
Click to collapse
Long story short: it's Sony's way to secure the rom.
Hello
I want
Downgrading a Sony Z3 Tablet Compact tablet SGP621 from lollipop 5.1.1 to kitkat 4.4.4
SGP621
any help ? or video youtube
i want easy way pls .
YusSuF15 said:
Hello
I want
Downgrading a Sony Z3 Tablet Compact tablet SGP621 from lollipop 5.1.1 to kitkat 4.4.4
SGP621
any help ? or video youtube
i want easy way pls .
Click to expand...
Click to collapse
Hope you're newbie here so will try to guide you step-by-step.
The easiest way is to download stock firmware for Flashtool.
For KitKat you can download 23.0.1.A.0.167 Firmware - this is the latest KitKat before Lollipop.
For SGP621 you can download it here: DOWNLOAD
Now Download FlashTool v0.9.18.6 - not newer e.g. 0.9.19.0 because they need some scripts and give errors. You can download it from HERE
Don't install PC Companion!
Let's start.
1. Download FlashTool from link above
2. Install
3. Go into C:\Flashtool\drivers and run Flashtool-drivers.exe
4. Select components - you only need Flashmode driver so select only flashmode driver and click install
5. Download FTF file and push it into C:\Users\Username\.flashtool\firmwares
6. Make sure your tablet is charged at least 50%!!!
7. Turn off tablet but DON'T CONNET TO PC
8. Run Flashtool (FlashTool if you have 32-bit OS, Flashtool64 if you have 64-bit)
9. Click LIGHTNING like on screen below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
10. Select flash mode
11. You will see a list with firmwares like on screen below
12.Select firmware in left column and check the boxes: APPSLOG, CACHE, DATA (you see it on screen above in pt. 11)
13. Click FLASH. Don't connect your tablet to your PC.
14. Flashtool will prepare everything - it takes about 1 minute - it looks like on screen below:
15. When flashtool is ready you will se this window:
16. Connect your SGP621 in flashmode - hold VOL- and connect to PC - when the windows closes, you can release VOL- button, but DON'T DISCONNECT YOUR TABLET UNLESS FLASHTOOL WILL WRITE sth like this:
Flash complete. Plug off your device and reboot. That's all!
17. Reboot your Tablet and that's all
thank you so much God bless you <3
SGP621_23.0.1.A.0.167_CE Firmware Does not support
Arabic language
Iam going to try SGP621_23.0.1.A.0.167_Customized UK ...<<no arabic too
I back to 5.1.1 xD Thank you any way
That's strange it doesn't have Arabic. Will try to look for KitKat with Arabic
YusSuF15 said:
SGP621_23.0.1.A.0.167_CE Firmware Does not support
Arabic language
Iam going to try SGP621_23.0.1.A.0.167_Customized UK ...<<no arabic too
I back to 5.1.1 xD Thank you any way
Click to expand...
Click to collapse
May I know where that custom UK kitkat is please, I would rather have that than the CE ftf.
Sent from my C5502 using Tapatalk
ecksdeeay said:
May I know where that custom UK kitkat is please, I would rather have that than the CE ftf.
Sent from my C5502 using Tapatalk
Click to expand...
Click to collapse
here
http://forum.xda-developers.com/z3-...ent/z3-tablet-compact-ftf-collection-t2959749
How to root 5.1.1
http://i.imgur.com/VHTwB3W.png
YusSuF15 said:
How to root 5.1.1
http://i.imgur.com/VHTwB3W.png
Click to expand...
Click to collapse
I BACK TO 5.0.2 AND GET ROOT WITH KingRoot
NOW I WANT INSTALL XPOSED FORM RECOVER XD HOW TO GET RECOVERY I TRY TWRP FROM APP BUT FAILD I INSTALL BUSYBOX TOO
ROOT WORK FINE AND I TRY XZDualRecovery NOT WORK TOO XD
SONY HARDWAY XD
ANY HELP
UNLUCK+ROOT WORK . BUT NEED RECOVERY NOW ..
#Update
this way to install Recovery
http://forum.xda-developers.com/showpost.php?p=58453577&postcount=2
Hello I want downgrade of software 6.0.1 Marschmilo to software 5.1.1 my device is sony xperia z3 tablet compact SGP 621
the best OS in everything for z3 is KITKAT 4.4.4. search for 4.4.4 ftf and flash it with flashtool.
Peace to all
Bruce666 said:
The easiest way is to download stock firmware for Flashtool.
For KitKat you can download 23.0.1.A.0.167 Firmware - this is the latest KitKat before Lollipop.
For SGP621 you can download it here: DOWNLOAD
Click to expand...
Click to collapse
Are you sure about 23.0.1.A.0.167 Firmware being the latest KitKat before Lollipop? According to PTCRB there were three (3) KK versions at least certified:
23.0.1.A.3.12
23.0.1.A.4.30
23.0.1.A.0.167
I'm actually "hunting" for the latest KK firmware here: [SGP611] Last KK Firmware anyone?
http://xperiafirmware.com/8-firmware/77-sony-xperia-z3-tablet-compact
Peace to all
Some update:
Bruce666 said:
Now Download FlashTool v0.9.18.6 - not newer e.g. 0.9.19.0 because they need some scripts and give errors.
Click to expand...
Click to collapse
I had to use version 0.9.25.0. Old 0.9.18.6 was throwing "Processing of loader.sin finished with errors". (Windows 10, x64)
Select Whipe APPS_LOG, B2B, USERDATA (as mentioned, else bootloop).
SGP621_23.0.1.A.0.167_CE successfully flashed.
(Took ~5 minutes. There is a longer break in flash process without any notification in flashtool. Just stay patient)
Rooting:
Had to use KingRoot, EasyRootTool and DoomLord_v4_root where freezing in process.
Backup-Ta worked as described, Servicemenu "Bootloader unlocked: yes"
Afterwards, do not use "Restore TA", it seems to lock you bootloader again, instead:
Flash Stock 23.5.A.1.291 same way
Download and extract ta_poc:
https://forum.xda-developers.com/crossdevice-dev/sony/poc-real-trim-instead-drm-fix-t3552893
Open your 23.5.A.1.291 tft/zip file (rename tft to zip) and extract kernel_S1-SW-LIVE-9C84-PID1-0006-MMC.sin.
Download twrp https://twrp.me/Devices/Sony/ (I used scorpion_windy on lte version, seems to work), name it recovery.img and place it in ta_poc folder
Run DOUBLECLICKME.bat, it will ask you for your kernel and TA backup files and it should automatically detect the twrp file.
When done, you will find a new_boot.img file. This is a combination of your stock boot image, together with your ta partition and twrp recovery.
Flash new_boot.img in fastboot
Code:
fastboot flash boot new_boot.img
Test if device boots to system
Download Magisk (I used 18.0)
Boot into twrp (push volume-up multiple times when Sony logo appears)
Flash Magisk zip
Boot and install Magisk Manager
Result (in my case):
Latest Stock version with twrp 3.0.2 and Magisk (root, root hiding,...)
All keys in service menu are [Key OK][Active].
(For me it shows "bootloader unlock allowed", as if bootloader is locked. But thats hard to believe since its booting with a patched bootloader.)
Ta Restore crashed
had to replace file find.exe in Backupt-TA-9.11\tools with my version from c:\windows\system32
Than it worked, all keys in service menu are [Key OK][Active]
But it seems this is relocking your bootloader. Service menu says again "Bootloader unlock allowed: yes" (don't know about it, I could restore TA on my XZ1c and bootloader stays onlocked)
Flashed 23.5.A.1.291 and afterwards this boot image https://forum.xda-developers.com/z3-tablet-compact/development/kernel-t3472019 for twrp.
Magix 18.0 (through twrp) bootloops!
Since vivo developers doesn't make any efforts to make the sources open, so, it is obvious that some functions might not work
Warning !!! Your Warranty is now void.
If You understand the risks and still want to play with your phone, go ahead,
No one will stop you, DUDE!!!
Downloads :-
Download TWRP recovery for vivo y51l
Latest :- TWRP 3.21. OTG fixed :- https://goo.gl/BUpUhc
twrp_3.1.1_for_vivo_y51l
twrp_3.2.1_for_vivo_y51l
TWRP_3.2.1-0-vivo-y51l-y21lkernel (Warning!!! flash this version only if you have flashed y21l kernel to enable root.)
Firmware Update & Bootloader unlock :-
To Install TWRP Recovery, first , we’ve to unlock bootloader of vivo y51l.
So, Follow the steps:-
Download The Latest firmware (PD1510F_EX_C_2.6.13) available from here
Google Drive Link
)
How To Flash :-
https://www.youtube.com/watch?v=IQEQ5jD269k
Now flash the firmware you downloaded above.
If you got Invalid IMEI MEID Error, See this thread.
Now You have flashed the latest available firmware and its time to unlock bootloader and flash twrp to your vivo y51l.
Now Again (‘,‘), follow the instructions in this guide to unlock y51l bootloader
Flash TWRP in vivo y51l :-
Connect Your vivo y51l to pc with usb debugging enabled
Now Open Open Command Prompt or Terminal and type
adb reboot bootloaderor
sudo adb reboot bootloader (If u r using linux)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now your phone will reboot into fastboot mode
Now download the TWRP Recovery for vivo y51l from the download section (No need if u’ve already downloaded)
Now extracts the downloaded zip file and You’ll get a file named twrp_3.1.1.img
Now Type
fastboot flash recovery twrp_3.1.1.imgor
sudo fastboot flash recovery twrp_3.1.1..img (If u r using linux)
Sorry For the excessive use of word “NOW”
That’s it. Your Vivo Y51L is now Running one of the best & latest custom recovery available on Planet EARTH.
Credits : Me, Me & Me
YouTube Video on the same :
https://www.youtube.com/watch?v=cA8QrAXsINc
Bingo......
UNOFFICIAL CM 12.1 for Vivo y51l is out, Have a look :
https://www.youtube.com/watch?v=2uSqIYiqXU4
Original Thread Here
Want to make more out of your Vivo Phone?
Sign the Petition to release kernel sources :
http://chn.ge/2E2N70w
Great job...bro
Hey bro, did you tried to flash supersu.zip?
shahnawaz_sheikh said:
Hey bro, did you tried to flash supersu.zip?
Click to expand...
Click to collapse
yes, flashed it, but there's a code in the kernel which prevents su binary execution.
And for the thumbnail you provided :
You can use the fastboot mode on vivo to only flash
recovery, boot command is not supprted.
Naveen Singh said:
yes, flashed it, but there's a code in the kernel which prevents su binary execution.
And for the thumbnail you provided :
You can use the fastboot mode on vivo to only flash
recovery, boot command is not supprted.
Click to expand...
Click to collapse
But that doesn't mean we cant make custom roms right??
shahnawaz_sheikh said:
But that doesn't mean we cant make custom roms right??
Click to expand...
Click to collapse
Yes, we can make custom roms,
i've ported miui 8 with lots of hardware issues,
But the problem is kernel source.
Because we cant build a kernel without source.
Bro did you have any problems In your phone...after booting.i need to upgrfforto 2.6.13 version in my vivo y51L...may you tell me Plz.. If you had issues or problems.if you had any issues just tell me i will decide to root my vivo y51l
gokulbuddy Sp said:
Bro did you have any problems In your phone...after booting.i need to upgrfforto 2.6.13 version in my vivo y51L...may you tell me Plz.. If you had issues or problems.if you had any issues just tell me i will decide to root my vivo y51l
Click to expand...
Click to collapse
No problems,
If you are flashing using qfil then choose PD1510F..........no_qcn.xml file for flashing
Never choose to flash qcn otherwise you will lose your imei and qcn stuffs
How to find that qfil bro..What is that
IOS custom rom
Please IOS Custom rom for Micromax q385
shahnawaz_sheikh said:
Hey bro, did you tried to flash supersu.zip?
Click to expand...
Click to collapse
yess, I need to flash it on TWRP !
---------- Post added at 03:33 PM ---------- Previous post was at 03:22 PM ----------
how to flash binary superSU or update superSU.zip on twrp 3.1.1...plz
jabirfan said:
yess, I need to flash it on TWRP !
---------- Post added at 03:33 PM ---------- Previous post was at 03:22 PM ----------
how to flash binary superSU or update superSU.zip on twrp 3.1.1...plz
Click to expand...
Click to collapse
Just flash it in twrp (click install button) man
Bro can you tell me How to use qfill? I dont know well about that....if you help me i will get better idea.......the qfil is a flash driver am i right or not.if it is right... how to use?
gokulbuddy Sp said:
Bro can you tell me How to use qfill? I dont know well about that....if you help me i will get better idea.......the qfil is a flash driver am i right or not.if it is right... how to use?
Click to expand...
Click to collapse
Qfil is flasht tool by Qualcomm for devices with Qualcomm chipsets. I will post a qfil tutorial soon.
Kepp coming....
Ok i will be wait...thanks for this comitment..
Naveen Singh said:
Just flash it in twrp (click install button) man
Click to expand...
Click to collapse
I have installed update.zip file, but why binary is not installed and always fail rooting
Unlocking Bootloader VIVO Y51L
..
how to solved this ?? im used windows 10 professional... help
Reza Adrian said:
..
how to solved this ?? im used windows 10 professional... help
Click to expand...
Click to collapse
pastikan saja semua driver sudah terinstall kemudian install adb interface dengan cara manual dan lihat pemberitahuannya.
Jika belum paham silahkan lihat tutorialnya di google
jabirfan said:
I have installed update.zip file, but why binary is not installed and always fail rooting
Click to expand...
Click to collapse
Root permission isn't available for vivo y51l yet
The reason is unsupported kernel. Hope u understand.
Reza Adrian said:
..
how to solved this ?? im used windows 10 professional... help
Click to expand...
Click to collapse
Is oem unlock enabled from developer settings?