So i guess you are here because your sensors are not working after flashing certain Rom or Kernel Right?
But Don't worry I'm here to help you
NOTE: If you are on new partition table (i.e if you flashed miui mm) use this partion name "mmcblk0p21"
Things you need
Root Access
Terminal Emulator
persistnew.img
Open terminal emulater app and type
su
dd if=/dev/block/mmcblk0p22 of=/sdcard/persist.img
Then you will get the persist.img file on your storage. copy and take it on a safe place... Like on OTG Drive or On PC...
Now copy the downloaded "persistnew.img" file to Internal storage and on terminal emulater app type
dd if=/sdcard/persistnew.img of=/dev/block/mmcblk0p22
Now Reboot... Now check your sensors with "Sensor Box" app on play store :fingers-crossed: Hurray!! Your sensors will be working again :highfive:
Enjoy!
Thanks to @satvikvg (for new partition name)
Reserved uploading files......
Even the IR Blaster? my ir blaster works only with xcelerate kernel and omni rom. ?
Nigam666 said:
Even the IR Blaster? my ir blaster works only with xcelerate kernel and omni rom. ��
Click to expand...
Click to collapse
Yep it will fix Ir blaster too
Make sure your kernel is set to Permissive
Is this for CM or MIUI? I know there are lots of sensors not working CM, will this enable all sensors on CM, or this is just for those who revert back to MIUI after using some Custom Roms and Kernels and found some sensors not working?
shabtab said:
Is this for CM or MIUI? I know there are lots of sensors not working CM, will this enable all sensors on CM, or this is just for those who revert back to MIUI after using some Custom Roms and Kernels and found some sensors not working?
Click to expand...
Click to collapse
This is for all roms on Mi4.
I tried in my Mi3, but not work...
But thanks for your effort!!!
Enviado desde mi MI 3W mediante Tapatalk
It would be amazing if it come already inolemented on all custom Roms wont it be?
shabtab said:
It would be amazing if it come already inolemented on all custom Roms wont it be?
Click to expand...
Click to collapse
No it cannot be implemented in a Rom.
dantegtr said:
I tried in my Mi3, but not work...
But thanks for your effort!!!
Enviado desde mi MI 3W mediante Tapatalk
Click to expand...
Click to collapse
Sorry to hear that but right now it is only for Mi4.I'll try to arrange Mi3 file soon
Has anyone tried it? step counter and significant Motion Detector works?
Can this fix GPS problem as well?
UPDATE
I flashed.... And no, it doesn't fix it.
digiboy1 said:
Can this fix GPS problem as well?
UPDATE
I flashed.... And no, it doesn't fix it.
Click to expand...
Click to collapse
It depends on your Rom and Kernel. Try using stock miui or official CM12.1
Prince Chandela said:
It depends on your Rom and Kernel. Try using stock miui or official CM12.1
Click to expand...
Click to collapse
I am using Official CM12.1 only, with stock kernel. GPS is broken in that for Mi 4W, and this fix also does not work, I'm sorry.
digiboy1 said:
I am using Official CM12.1 only, with stock kernel. GPS is broken in that for Mi 4W, and this fix also does not work, I'm sorry.
Click to expand...
Click to collapse
your GPS works on Stock Miui?
CM 12.1 Stock Kernel.
This does not fix Gyroscope and Temp sensors on CM 12.1 Stock Kernel.
Prince Chandela said:
your GPS works on Stock Miui?
Click to expand...
Click to collapse
Yes it works.
digiboy1 said:
Yes it works.
Click to expand...
Click to collapse
Than it is your Rom bug
Prince Chandela said:
So i guess you are here because your sensors are not working after flashing certain Rom or Kernel Right?
Open terminal emulater app and type
su
dd if=/dev/block/mmcblk0p22 of=/sdcard/persist.img
Then you will get the persist.img file on your storage. copy and take it on a safe place... Like on OTG Drive or On PC...
Now copy the downloaded "persistnew.img" file to Internal storage and on terminal emulater app type
dd if=/sdcard/persistnew.img of=/dev/block/mmcblk0p22
Now Reboot... Now check your sensors with "Sensor Box" app on play store :fingers-crossed: Hurray!! Your sensors will be working again :highfive:
Enjoy!
Click to expand...
Click to collapse
Any chance it work on Xiaomi Redmi 2?
We' got the same problem on Custom ROMs
If not, can you help us? :3
Lennoard said:
Any chance it work on Xiaomi Redmi 2?
We' got the same problem on Custom ROMs
If not, can you help us? :3
Click to expand...
Click to collapse
I can but i need a person who has working Redmi 2 and has some technical info. Your Redmi 2 is working?
Related
!!THIS IS NOT MY WORK, IT'S SHARING ONLY FROM A CHINESE BOARD!!
I found this ROM on a Chinese board, this is a build from 12.09.2016 of Cyanogenmod 13 [For Redmi 3S] by the Chinese developer Po.Chan (not me) all credits go to him
Download:
Link unlock password: 8m9g
https://pan.baidu.com/s/1hr3tR7Y
Installation:
Flash using Recovery with full wipe, as usual
Original source: http://bbs.wisenjoy.com/forum.php?mod=viewthread&tid=554706&highlight=3S
Enjoy~
BUGS: The ROM comes with the usual bugs (no video recording etc.), but as reported they can be fixed for the most/completely, using the common .zip for RR
Tried it yesterday:
Microphone not working with apps like Google search : ' cannot access microphone'
Vidéo not working too because cannot connect media, i think it is linked with the microphone.
Beside this it works (call, sms, wifi, LTE,... )
We have to wait for the good kernel...
Is there any improvement from that flour_mo cm13 in it?
np20feb said:
Is there any improvement from that flour_mo cm13 in it?
Click to expand...
Click to collapse
Don't know if I had flour mo or the other one if xda thread, but this was better IMHO. Seems better coded
Could somebody probide a mirror? Google drive or mega upload? Thanks!
I have been trying to download from this site but no luck. It goes fine upto the captcha part but entering thr captcha does nothing.
So if anyone has been able to download this rom, please upload it to another site.
Aronuser said:
Don't know if I had flour mo or the other one if xda thread, but this was better IMHO. Seems better coded
Click to expand...
Click to collapse
ok then,i will give it a try.I used flour_mo cm13 for a week ,lets try this one.
update: need alternate downloading link asap !!
redmi 3 only
This thread is for redmi 3. And this one is for redmi 3s!
Remi 3 only shares rom with redmi 3 pro and redmi prime.
archtan said:
This thread is for redmi 3. And this one is for redmi 3s!
Remi 3 only shares rom with redmi 3 pro and redmi prime.
Click to expand...
Click to collapse
Buddy, there is no separate subforum for redmi 3s. So all posts regarding it are posted in Redmi 3 and are tagged with redmi 3s to avoid confusion.
lcarolo said:
Tried it yesterday:
Microphone not working with apps like Google search : ' cannot access microphone'
Vidéo not working too because cannot connect media, i think it is linked with the microphone.
Beside this it works (call, sms, wifi, LTE,... )
We have to wait for the good kernel...
Click to expand...
Click to collapse
You're saying calls work? No shut down after or before a call? As with the other CM version?
Ptmaroct said:
I have been trying to download from this site but no luck. It goes fine upto the captcha part but entering thr captcha does nothing.
So if anyone has been able to download this rom, please upload it to another site.
Click to expand...
Click to collapse
Same problem here hehe... Gonna give it another try and share if it works
Robin>Hood said:
You're saying calls work? No shut down after or before a call? As with the other CM version?
Same problem here hehe... Gonna give it another try and share if it works
Click to expand...
Click to collapse
I didn't face any issues with phonecalls, just signal maybe was lil bit weaker than on latest chinadev beta
Aronuser said:
I didn't face any issues with phonecalls, just signal maybe was lil bit weaker than on latest chinadev beta
Click to expand...
Click to collapse
Sensors working for you?
sheshuvadrevu said:
Sensors working for you?
Click to expand...
Click to collapse
Sorry, I don't know. I didn't keep it long, because I need VoIP.
sheshuvadrevu said:
Sensors working for you?
Click to expand...
Click to collapse
Other than that, you could try the fix of the RR rom, if sensors not working. Likely, it'll then work.
Aronuser said:
Other than that, you could try the fix of the RR rom, if sensors not working. Likely, it'll then work.
Click to expand...
Click to collapse
I've tried the fix for rr but it didn't work on this Rom, cpuz is not showing any sensor.
Sent from my Redmi 3S using Tapatalk
sheshuvadrevu said:
I've tried the fix for rr but it didn't work on this Rom, cpuz is not showing any sensor.
Sent from my Redmi 3S using Tapatalk
Click to expand...
Click to collapse
Oh, sorry to hear
Aronuser said:
Oh, sorry to hear
Click to expand...
Click to collapse
It didn't work even on RR for me
Sent from my Redmi 3s using Tapatalk
sheshuvadrevu said:
It didn't work even on RR for me
Sent from my Redmi 3s using Tapatalk
Click to expand...
Click to collapse
Then you're doing something wrong, it works for RR if ur doing it right, I tried it. Make sure to set permissions properly. You can find threads on XDA about how to set those permissions.
Aronuser said:
Then you're doing something wrong, it works for RR if ur doing it right, I tried it. Make sure to set permissions properly. You can find threads on XDA about how to set those permissions.
Click to expand...
Click to collapse
Hi
please help me
my phone Redmi 3s unlocked TW recovery
i flashed zip file super su from recovery
but i cant set permissions properly it says the frimware does not allow
and in lucky patcher when i want patch app it says you dont have a 100% root
i flash super su 2.71 ~ 2.78 and root checker says ROOT ok
rtmreza said:
Hi
please help me
my phone Redmi 3s unlocked TW recovery
i flashed zip file super su from recovery
but i cant set permissions properly it says the frimware does not allow
and in lucky patcher when i want patch app it says you dont have a 100% root
i flash super su 2.71 ~ 2.78 and root checker says ROOT ok
Click to expand...
Click to collapse
You'll find the option to activate root in the latest cyanogen ROM's in the developer options, tap the build number in phone information 7 times and the developer options get activated in settings. Look for the setting root access, chose "Apps and ADB" there. You don't need to flash SuperSU
:silly:
Thank you for the build, @luisgonzales1977
Waiting for A/B build.
ZainBilq said:
Thank you for the build, @luisgonzales1977
Waiting for A/B build.
Click to expand...
Click to collapse
when you finish testing :good::silly:
Will it include Mi9 in-display FP like in phhusson's AOSP?
luisgonzales1977 said:
when you finish testing :good::silly:
Click to expand...
Click to collapse
Yeah I know...just like that....
This Rom work in Lenovo k5 pro? Is a device arm64 aonly.
any AB love ?
TheUndertaker21 said:
any AB love ?
Click to expand...
Click to collapse
they are soon testing it...:good:
luisgonzales1977 said:
when you finish testing :good::silly:
Click to expand...
Click to collapse
I am a few hours on your rom and is working bugfree for me everything i need arcore also working very nice job:good:
Excellent work !
Booted successfully on Huawei p10 lite after changing selinux/mapping/26.0.cil .
Except I have faced settings FC when opening Decor room in X-Tensions and I'm not able to make logcat due to ADB unauthorized
Thanks
android q activity animation available sir?
won't be able to bootup on mate 10 lite
flamedrops said:
won't be able to bootup on mate 10 lite
Click to expand...
Click to collapse
you test?
successfully booted up on my Lenovo S5 (K520/Seoul), but on the first setting screen after boot it shown missmatch vendor notice (it recommend to flash vendor img). i still could skip it and continue by the way.
So about the missmatch vendor, will it hurt if i don't flash it? because i don't know which file of vendor img i should flash.
update : same as reported from other user several posts before, Decor room in X-Tensions FC when open
luisgonzales1977 said:
you test?
Click to expand...
Click to collapse
yes, i use to try every other rom, now im on havoc and it works.
Boots up in Blu Vivo XI. Can't seem to get magisk to work with any gsi's. Thanks for the rom.
aljoscha81 said:
I am a few hours on your rom and is working bugfree for me everything i need arcore also working very nice job:good:
Click to expand...
Click to collapse
Hi pal. Any specific steps to flash this rom on Z17? What rom as base do you have? Any nfound vendor or something else?
surfer30 said:
Hi pal. Any specific steps to flash this rom on Z17? What rom as base do you have? Any nfound vendor or something else?
Click to expand...
Click to collapse
I am on mokee as base installed as ever no further steps
Is there a chance to get an ARM32-A build? I would like to try this rom. Looks promising!
khuy21 said:
So about the missmatch vendor, will it hurt if i don't flash it? because i don't know which file of vendor img i should flash.
update : same as reported from other user several posts before, Decor room in X-Tensions FC when open
Click to expand...
Click to collapse
not need change vendor
just need set right fingerprint values in build.prop, some magisk modules may this
or search info and change it by hand
on short - fingerprint from system build.prop need to match values from vendor build.prop
hello guys ....awesome news
must be on MiuiMiX_2.0_grus rom
download and extract it to pc
restore this with twrp
after first boot install this https://www.apkmirror.com/apk/googl...9-2-74-120400-265167076-android-apk-download/
finish the pixel setup
bugs : FOD
rom download : https://drive.google.com/open?id=1JFnxymxmIiE9QfYShi4PK-E8wPhZv--X
Enjoy !!!
Flash it on your risk
Thanks for Erfan (for its GSI and permissiver) , PeppeCNN for its miui rom , pengus77 for its kernel
Hi.
Did you test it? BT works fine?
Can you tell us where did you get it?
Thanks.
kagazushi said:
Hi.
Did you test it? BT works fine?
Can you tell us where did you get it?
Thanks.
Click to expand...
Click to collapse
its erfan pixel 10 gsi ... bluetooth working well
sh4dow6oy said:
its erfan pixel 10 gsi ... bluetooth working well
Click to expand...
Click to collapse
Ok thanks for the precisions.
How is the notch? Is it nice like in miui or is it weird like in pixel experience? Are the corners rounded properly so that nothing is cut off by the corner? Does the fingerprint sensor not work at all or does it only work when the screen is on?
TheNikkoMan said:
How is the notch? Is it nice like in miui or is it weird like in pixel experience? Are the corners rounded properly so that nothing is cut off by the corner? Does the fingerprint sensor not work at all or does it only work when the screen is on?
Click to expand...
Click to collapse
notch seems ok to me ... rounded corners are weird ... bug from android 10 .... fod is not working
should I restore all? Or just the system partition?
ambinp said:
should I restore all? Or just the system partition?
Click to expand...
Click to collapse
restore all
I just installed it. Not worth trying. The display looks bad it's not optimized for mi 9 se
ambinp said:
I just installed it. Not worth trying. The display looks bad it's not optimized for mi 9 se
Click to expand...
Click to collapse
I dont have these problems
Everythings are working
dtosun said:
Everythings are working
Click to expand...
Click to collapse
wait for phh's gsi if you want a working in-display fingerprint
okitavera said:
wait for phh's gsi if you want a working in-display fingerprint
Click to expand...
Click to collapse
Is he already working on the gsi?
champagne66601 said:
Is he already working on the gsi?
Click to expand...
Click to collapse
yeah, I saw 10-stuff is going on at his github
Installed normal, but is crashing and appearing on the screen without stopping the following processes. There is no way to use it.
android.process.acore
android.process.media
m41k31 said:
Installed normal, but is crashing and appearing on the screen without stopping the following processes. There is no way to use it.
android.process.acore
android.process.media
Click to expand...
Click to collapse
did u format data
sh4dow6oy said:
did u format data
Click to expand...
Click to collapse
I formatted the data, installed MiuiMiX_2.0_grus rom, and restored it with twrp, rebooted and done.
So phhusson's AOSP 10.0 v200.d GSI boots on the Mi 9 SE, but camera, wifi, fingerprint sensor mobile data and sensors don't seem to work. I don't know whether that's because of lacking hardware support in the ROM or if it's something I've done wrong. The logcat says that it can't find the wifi drivers, don't know if that's a kernel or vendor problem.
I've tried vendor 9.9.3 and the MIUI 11 beta boot.img ROM. I'm gonna try V10.3.4.0 vendor.
New vendor didn't change anything, but I flashed okitavera's 8.2 kernel and now wifi, (the middle) camera and sensors work. Mobile data and fingerprint sensor still don't work. It's a shame because the rom is so beautiful and fluid, I'd love to use it daily, but it's just not usable without the fingerprint sensor and mobile data.
TheNikkoMan said:
So phhusson's AOSP 10.0 v200.d GSI boots on the Mi 9 SE, but camera, wifi, fingerprint sensor mobile data and sensors don't seem to work. I don't know whether that's because of lacking hardware support in the ROM or if it's something I've done wrong. The logcat says that it can't find the wifi drivers, don't know if that's a kernel or vendor problem.
I've tried vendor 9.9.3 and the MIUI 11 beta boot.img ROM. I'm gonna try V10.3.4.0 vendor.
New vendor didn't change anything, but I flashed okitavera's 8.2 kernel and now wifi, (the middle) camera and sensors work. Mobile data and fingerprint sensor still don't work. It's a shame because the rom is so beautiful and fluid, I'd love to use it daily, but it's just not usable without the fingerprint sensor and mobile data.
Click to expand...
Click to collapse
Use this rom with vendor and boot ... and flash phh 200d and permissiver v5 ... it will work ... but fod brightness is buggy
gapps
sh4dow6oy said:
Use this rom with vendor and boot ... and flash phh 200d and permissiver v5 ... it will work ... but fod brightness is buggy
Click to expand...
Click to collapse
How to install google apps?
https://www.youtube.com/watch?v=JGN3nzrpsic
GAPPS included.
1- Open TWRP.
2- Format data / yes.
3- Reboot recovery.
4- Flash FW 20.1.21Q
5- Flash Rom.
6- Reboot and enjoy.
Bugs: Fingerprint
https://s4.dosya.tc/server9/cwx7qh/FW-BB_20.1.21_v11-Q.zip.html
https://yadi.sk/d/1jLEZtuQ48Ag3g
Very well. I expected a pixel rom for the Mi9SE.
Can it be used on a daily basis?
What are the bugs? Only fingerprint?
Is it real?? dreams come true?? awesome job!!!!
Bugs report:
The phone always reboot when the hostpot was turn on.
Thanks for this! Very appreciated.
Before give a try this ROM, does enayone know if Andorid Auto is working?
Thanks again.
Anybody get the GCAM works properly?
that great job could use it as default ROM
milo.almeida said:
Anybody get the GCAM works properly?
Click to expand...
Click to collapse
Yes, lastest 7.3 by Urnyx
Dou you have fingerprint fix? Fingerprint is not working. It is annoying.
Anyone knows/test the Okitavera's kernel for solve the fingerprint issue like on PE 9.0 ?
Is there a version without GAPPS?
Reznoov said:
Anyone knows/test the Okitavera's kernel for solve the fingerprint issue like on PE 9.0 ?
Click to expand...
Click to collapse
This kernel is for Android Pie, not working for Q. There is no fix for now, I asked developer.
Wow ok, waiting for someone fix to install, thanks
Looking forward to a more stable version of this! Thanks for the hard work!
I believe there will be no other updates and a life that awaits this and the first with Android 10 but it has never been updated until now
zindra7 said:
Yes, lastest 7.3 by Urnyx
Click to expand...
Click to collapse
What config are you using?
dbjungle said:
What config are you using?
Click to expand...
Click to collapse
Stock, without any config file
Hi everyone, I've been trying to find a custom rom for Xiaomi Mi 12X, but none found so far. I tried to port Pixel Experience rom using the Xiaomi Mi 11X (alioth) device tree and changed accordingly, since the SOC and almost all specs are the same except Camera. Can anybody shed some light in how to correctly port the ROM for my devices without official device tree from LineageOS or Pixel Experience? Thank you.
Anybody has any suggestions?
JChanMe said:
Anybody has any suggestions?
Click to expand...
Click to collapse
Hi, right now I'm using crdroid gsi, which works pretty good. Except of fp, everything works as it should. It's smooth, has a good bb and even MGC's Gcam 8.1, last stable, works incl. portrait, nightmode and with all lenses (ok, no pixelbinning). Installing is pretty simple: use fastbootd and just fash img to system. That's it....
Voodoojonny said:
Hi, right now I'm using crdroid gsi, which works pretty good. Except of fp, everything works as it should. It's smooth, has a good bb and even MGC's Gcam 8.1, last stable, works incl. portrait, nightmode and with all lenses (ok, no pixelbinning). Installing is pretty simple: use fastbootd and just fash img to system. That's it....
Click to expand...
Click to collapse
Thank you but I don't see it on crdrood website, did you build it yourself?
JChanMe said:
Thank you but I don't see it on crdrood website, did you build it yourself?
Click to expand...
Click to collapse
It's a gsi treble rom (that works with many vendors)... Just search for project treble on xda!
Voodoojonny said:
It's a gsi treble rom (that works with many vendors)... Just search for project treble on xda!
Click to expand...
Click to collapse
Thank you. I figured it out and tried a few treble roms including pixel experience, there are a few problems including auto brightness, fingerprint and vibrator. You had the same problems?
JChanMe said:
Thank you. I figured it out and tried a few treble roms including pixel experience, there are a few problems including auto brightness, fingerprint and vibrator. You had the same problems?
Click to expand...
Click to collapse
Yes, especially the sound makes problems... When usung videocall, it's awfully distorted. I'm using stock for now. With Lawnchair and some modifications it's ok for now.
Do you know, why there's no thread for our phone here?
Just seen, you are forking some repositories... Have you been successful in building?
Voodoojonny said:
Just seen, you are forking some repositories... Have you been successful in building?
Click to expand...
Click to collapse
I successfully build the ROM without errors, just some warnings, but it didn't boot aftter flashing it.
JChanMe said:
I successfully build the ROM without errors, just some warnings, but it didn't boot aftter flashing it.
Click to expand...
Click to collapse
Did you flash with vendor or system only?
Voodoojonny said:
Did you flash with vendor or system only?
Click to expand...
Click to collapse
No, I used the same procedure as described for Alioth device, fastboot flash boot boot.img, then from recovery use adb push to update the zip ROM file.
JChanMe said:
No, I used the same procedure as described for Alioth device, fastboot flash boot boot.img, then from recovery use adb push to update the zip ROM file.
Click to expand...
Click to collapse
But how did you built the rom. Did you get out a flashing zip directly? Normally, you create different partitions as fas as I know... Would you share your rom? Btw. which one did you build?
Voodoojonny said:
But how did you built the rom. Did you get out a flashing zip directly? Normally, you create different partitions as fas as I know... Would you share your rom? Btw. which one did you build?
Click to expand...
Click to collapse
Yes, after building I got a zip and flashing it using update by adb push. I built Pixel Experience Android 11
JChanMe said:
Yes, after building I got a zip and flashing it using update by adb push. I built Pixel Experience Android 11
Click to expand...
Click to collapse
But you used the lineage device tree. And PE is aosp not lineage. Might that be the problem? Would you try to build crdroid? Or instruct me how to setup a build environment?
No, I used the PE device tree, not Lineage. I used the build instructions provided by Pixel Experience for Alioth.
JChanMe said:
Anybody has any suggestions?
Click to expand...
Click to collapse
Yesterday xiaomi released kernel for 12x on GitHub. So I think now you can build pe/los without troubles
Maxletsplay_1 said:
Yesterday xiaomi released kernel for 12x on GitHub. So I think now you can build pe/los without troubles
Click to expand...
Click to collapse
Didn't they release the kernel when the phone was released?
JChanMe said:
Didn't they release the kernel when the phone was released?
Click to expand...
Click to collapse
Technically yes, but i've checked GitHub(about month ago) and I didn't saw kernel for this phone, just an empty folder
JChanMe said:
Didn't they release the kernel when the phone was released?
Click to expand...
Click to collapse
Did you replaced vendor libs with libs from 12x and other stuff like fstab, bins, rc files..configs? Attach logs from boot if you decide to build again. My advice is to build as eng and disable encryption, put selinux to minimal mode, nuke livedisplay, import vendor modules if you build with stock prebuilt kernel. Always look for F Linker errors in log and resolve them.
I'm waiting for AOSP rom too.