Related
Hi, I tried to install a custom JB rom on my Sony Xperia U but now I'm in a reboot loop when i connect my device to the computer it connects and disconnects all the time cannot even flash please help thanks.
Are you connecting it off, then holding Vol - to trigger fastboot on USB? Don't do it when it's bootlooping.
Check the following things:
1 you have unlocked bootloader.
2 you have Xperia u fastboot and flashing drivers properly installed.
Reinstall drivers if you aren't sure whether they're properly installed or not
3 you said you're getting bootloop so your device isn't bricked..
4 take out the battery and insert again and press volume down button for flashmode and flash stock ics
5 flash boot.img from kernel zip file in FASTBOOT MODE.. If you're not sure how to do that there's a guide available in forum.. Search for it
6 then reboot to recovery, do wipes, then flash the Rom...
7 reboot twice
8 second reboot takes 10 mins don't freak out its normal
9 enjoy
AD9295 said:
Check the following things:
1 you have unlocked bootloader.
2 you have Xperia u fastboot and flashing drivers properly installed.
Reinstall drivers if you aren't sure whether they're properly installed or not
3 you said you're getting bootloop so your device isn't bricked..
4 take out the battery and insert again and press volume down button for flashmode and flash stock ics
5 flash boot.img from kernel zip file in FASTBOOT MODE.. If you're not sure how to do that there's a guide available in forum.. Search for it
6 then reboot to recovery, do wipes, then flash the Rom...
7 reboot twice
8 second reboot takes 10 mins don't freak out its normal
9 enjoy
Click to expand...
Click to collapse
Thanks!, It worked my device is working normally now .. but I can't really find a guide on how to install the boot.img can you please link me to it ? thanks.
GoldenMikez said:
Thanks!, It worked my device is working normally now .. but I can't really find a guide on how to install the boot.img can you please link me to it ? thanks.
Click to expand...
Click to collapse
the command for fastboot is
fastboot flash boot boot.img
the boot.img file must be in same folder as fastboot
there are two methods :
i recommend second method..
1. using command prompt
procedure - download adb and fastboot drivers.. extract them anywhere in pc.. copy the boot.img file to that extracted folder (i cant find the thread which contains the link for the drivers but u can definitely get it by google-ing it)
press and hold shift and right click..
select open command window here
switch off your phone
hold vol up key on ur phone and connect it to pc.. (blue led will come up)
then pass the command in command prompt as - fastboot flash boot boot.img
or
2 using flashtool
open flashtool
switch off your phone
hold vol up key on ur phone and connect it to pc.. u'll see in the flashtool that - device connected in fastboot mode
then clickon flash button and select fastboot
click on select kernel to flash and select boot.img which u extracted from kernel file..
Do these steps quickly.. fastboot mode automatically shuts down after 15-20 seconds and ur phone will start charging itself..
after flashing jb kernel reboot in recovery and then follow next steps
Enjoyy
reboot loop
im in a bootloop with a phantom kernel and i didnt place the rom in the phone storage, the telephone is rebooting again and again. i can acces to the CWM but i don't know how i can transplant the rom now :crying: thanks
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
ramkumarkr666 said:
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
Click to expand...
Click to collapse
flash kernel usiing fastboot (not flashmode)
download this, then extract. (u need to have Android sdk installed, if not search google & install) http://www33.zippyshare.com/v/22861267/file.html
1. pur kernel into the fastboot folder
2. power off device. press & HOLD vol up button when u cannect to pc. the blue led should lit. leave phone
3. go back to fastboot folder click in empty space, then hold 'shift' & press right mouse button --> ''open console here''
4 now u should have a black box (cmd)
5 type ''fastboot flash boot boot.img'' (without quotes, & remeber the red text is the name of the kernel may u have to rename it)
6. fast boot should tell u all done, ok.
7. boot in CWM
ramkumarkr666 said:
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
Click to expand...
Click to collapse
download flash tool and install it ...
switch off phone
connect the usb to pc and phone by holding volume up key NOW blue led light up...u can see flash tool notify that device connected in fastboot mode..
Now press the lighting key select fastboot ...then select kernel to flash...
DONE...
Note: phone driver must be installed
First of all I would thank Crowds he is the best reference that I've to return in case of any problem I face. (He doesn't sleep - any time I ask he immediately supports)
I bought Lenovo K910 and I've managed successfully to install new ROM "VIBEUI_v2.0_1443" and Gapps with Crowds support.
I advised two of my friends to buy this good and cheap phone. For one of them I installed the latest rom successfully. But with the other I had a big problem The phone stuck on Lenovo Logo.
I was trying to install TWRP 2.7.0.0 batch before installing my new ROM, but during installation and after the phone rebooting the batch command screen shows <Waiting for Device> and the phone is stuck on logo screen.
I tried to connect the phone to PC many times, but PC doesn't recognize the phone. When I try to turn off the phone by pressing the power buttons, the phone restart on logo screen like the shown in this video.
I've read in many site that I have to do the following:
Download and install "minimal adb and fastboot"
Just type on the command line without pressing Enter:
Code:
[COLOR="Blue"][B][I]fastboot [COLOR="Plum"][STRIKE]boot[/STRIKE][/COLOR] recovery.img[/I][/B][/COLOR]
you should place your recovery image file in "minimal adb and fastboot" directory
The phone should be disconnected from computer and completely off (press the Power button for 10 seconds - in my case the phone is restarting)
Press and hold both volume buttons, then connect the cable to the PC.
Once the phone vibrate, press Enter to execute the recovery command line
Click to expand...
Click to collapse
In my case when I press and hold power button the phone is restarting on logo screen so I have to wait for battery consumption
I tried many times with TWRP images but it failed...
I tried with CWM image and it succeeded to load, but I don't have otg cable to load recovery or ROM from usb storage (The problem was in installing TWRP and my ROM should has no problem)
I want to flash TWRP on phone not only loading by "minimal adb and fastboot".
I decided to flash TWRP 2.7.1.2 batch through modifying the batch file. I just used fastboot commands
Code:
[COLOR="blue"][I]fastboot oem device-info
fastboot oem unlock
fastboot oem device-info
fastboot [COLOR="Red"][U][B]flash[/B][/U][/COLOR] recovery data/recovery.img
fastboot flash aboot data/lock/emmc_appsboot.mbn
fastboot flash rpm data/lock/rpm.mbn
fastboot flash sbl1 data/lock/sbl1.mbn
fastboot flash dbi data/lock/sdi.mbn
fastboot flash tz data/lock/tz.mbn
fastboot reboot[/I][/COLOR]
Finally I succeeded to install Recovery and phone works well in the new recovery mode and the system mode that I've not update it yet
I want to share you the problem solution in brief:
Download and extract this file "flashrec TWRP v2.7.1.2" from here
Just select without executing "flashrec_Modified.bat" file from the extracted files.
The phone should be disconnected from computer and completely off (press the Power button for 10 seconds or wait for the battery to be almost empty)
Press and hold both volume buttons, then connect the cable to the PC.
Once the phone vibrate, press Enter to execute the recovery batch file
and as me the phone start the recovery mode in TWRP and can be rebooted in system without any problem
i must extract "flashrec TWRP v2.7.1.2 this file on phone or where? can u explain a
agsao said:
First of all I would thank Crowds he is the best reference that I've to return in case of any problem I face. (He doesn't sleep - any time I ask he immediately supports)
I bought Lenovo K910 and I've managed successfully to install new ROM "VIBEUI_v2.0_1443" and Gapps with Crowds support.
I advised two of my friends to buy this good and cheap phone. For one of them I installed the latest rom successfully. But with the other I had a big problem The phone stuck on Lenovo Logo.
I was trying to install TWRP 2.7.0.0 batch before installing my new ROM, but during installation and after the phone rebooting the batch command screen shows <Waiting for Device> and the phone is stuck on logo screen.
I tried to connect the phone to PC many times, but PC doesn't recognize the phone. When I try to turn off the phone by pressing the power buttons, the phone restart on logo screen like the shown in this video.
I've read in many site that I have to do the following:
In my case when I press and hold power button the phone is restarting on logo screen so I have to wait for battery consumption
I tried many times with TWRP images but it failed...
I tried with CWM image and it succeeded to load, but I don't have otg cable to load recovery or ROM from usb storage (The problem was in installing TWRP and my ROM should has no problem)
I want to flash TWRP on phone not only loading by "minimal adb and fastboot".
I decided to flash TWRP 2.7.1.2 batch through modifying the batch file. I just used fastboot commands
Code:
[COLOR="blue"][I]fastboot oem device-info
fastboot oem unlock
fastboot oem device-info
fastboot [COLOR="Red"][U][B]flash[/B][/U][/COLOR] recovery data/recovery.img
fastboot flash aboot data/lock/emmc_appsboot.mbn
fastboot flash rpm data/lock/rpm.mbn
fastboot flash sbl1 data/lock/sbl1.mbn
fastboot flash dbi data/lock/sdi.mbn
fastboot flash tz data/lock/tz.mbn
fastboot reboot[/I][/COLOR]
Finally I succeeded to install Recovery and phone works well in the new recovery mode and the system mode that I've not update it yet
I want to share you the problem solution in brief:
Download and extract this file "flashrec TWRP v2.7.1.2" from here
Just select without executing "flashrec_Modified.bat" file from the extracted files.
The phone should be disconnected from computer and completely off (press the Power button for 10 seconds or wait for the battery to be almost empty)
Press and hold both volume buttons, then connect the cable to the PC.
Once the phone vibrate, press Enter to execute the recovery batch file
and as me the phone start the recovery mode in TWRP and can be rebooted in system without any problem
Click to expand...
Click to collapse
Please explain me. idont know how to do
prxzero said:
Please explain me. idont know how to do
Click to expand...
Click to collapse
What Is your problem?
Is your phone stuck on logo screen? what were you doing to get the problem??
agsao said:
First of all I would thank Crowds he is the best reference that I've to return in case of any problem I face. (He doesn't sleep - any time I ask he immediately supports)
I bought Lenovo K910 and I've managed successfully to install new ROM "VIBEUI_v2.0_1443" and Gapps with Crowds support.
I advised two of my friends to buy this good and cheap phone. For one of them I installed the latest rom successfully. But with the other I had a big problem The phone stuck on Lenovo Logo.
I was trying to install TWRP 2.7.0.0 batch before installing my new ROM, but during installation and after the phone rebooting the batch command screen shows <Waiting for Device> and the phone is stuck on logo screen.
I tried to connect the phone to PC many times, but PC doesn't recognize the phone. When I try to turn off the phone by pressing the power buttons, the phone restart on logo screen like the shown in this video.
I've read in many site that I have to do the following:
In my case when I press and hold power button the phone is restarting on logo screen so I have to wait for battery consumption
I tried many times with TWRP images but it failed...
I tried with CWM image and it succeeded to load, but I don't have otg cable to load recovery or ROM from usb storage (The problem was in installing TWRP and my ROM should has no problem)
I want to flash TWRP on phone not only loading by "minimal adb and fastboot".
I decided to flash TWRP 2.7.1.2 batch through modifying the batch file. I just used fastboot commands
Code:
[COLOR="blue"][I]fastboot oem device-info
fastboot oem unlock
fastboot oem device-info
fastboot [COLOR="Red"][U][B]flash[/B][/U][/COLOR] recovery data/recovery.img
fastboot flash aboot data/lock/emmc_appsboot.mbn
fastboot flash rpm data/lock/rpm.mbn
fastboot flash sbl1 data/lock/sbl1.mbn
fastboot flash dbi data/lock/sdi.mbn
fastboot flash tz data/lock/tz.mbn
fastboot reboot[/I][/COLOR]
Finally I succeeded to install Recovery and phone works well in the new recovery mode and the system mode that I've not update it yet
I want to share you the problem solution in brief:
Download and extract this file "flashrec TWRP v2.7.1.2" from here
Just select without executing "flashrec_Modified.bat" file from the extracted files.
The phone should be disconnected from computer and completely off (press the Power button for 10 seconds or wait for the battery to be almost empty)
Press and hold both volume buttons, then connect the cable to the PC.
Once the phone vibrate, press Enter to execute the recovery batch file
and as me the phone start the recovery mode in TWRP and can be rebooted in system without any problem
Click to expand...
Click to collapse
Hi..
i just try to install CM12 to this device, with twrp 2.8.6.1 from master lie.
First time its working well, but suddenly this device restarting and stuck on the "lenovo" logo screen.
Every time i presh power button always restarting (like ON-OFF-ON-OFF forever).
when i connectto charger also restarting....
i cant go to twrp using vol- & pwr, when i use minimal adb cannot detected..
Can you help me...
Help
hi.
i try to do something to enable notifications on my lenovo vibe z.
i install new rom from needrom, but it didn't help. So i try to install other one, but i wipe my phone and restart without installed system.
Now when i go to twrp have just flashing teamwin logo, and only when phone is in this mode i can communicate through adb
i have checked many forums and try allot stuff to fix it but nothing works
Please Help!
U are not alone I also in same stage
Is there any one plz help
As long as the hardware is not physically broken, your K910 is unbrickable
http://www.teamsuperluminal.org/unbrick-lenovo-k910/
I followed the guide to revive my K910. You can refer to this forum post in which I documented my experiences:
http://www.teamsuperluminal.org/forums/topic/flash-back-to-lenovo-stock-just-temporarily/
nowbo said:
Is there any one plz help
Click to expand...
Click to collapse
Thanks for your reply
I will apply today. Hope for the best.
Will inform you as soon as this applied..
Have you fixed that problem?
Still at same stage
EcoDan said:
Have you fixed that problem?
Click to expand...
Click to collapse
Hi,
I am still on same stage (Black screen with lenovo logo). Try several ways but can't get out of this. Please help me If any one successful to startup this device or can get on the boot screen where I can do factory reset.
---------- Post added at 07:25 AM ---------- Previous post was at 07:21 AM ----------
wxppro said:
http://www.teamsuperluminal.org/unbrick-lenovo-k910/
I followed the guide to revive my K910. You can refer to this forum post in which I documented my experiences:
http://www.teamsuperluminal.org/forums/topic/flash-back-to-lenovo-stock-just-temporarily/
Click to expand...
Click to collapse
I Try this method but can't get out from that black screen ( Lenovo logo and powered by android)
My device is Lenovo Vibe shot Z90a40. I also try with boot unlock-er but nothing sitll work. So its about 20 days can't use my Lenovo Vibe Shot.
Please help me If you know how to get out of this issue..
Thanks
[/COLOR]
I Try this method but can't get out from that black screen ( Lenovo logo and powered by android)
My device is Lenovo Vibe shot Z90a40. I also try with boot unlock-er but nothing sitll work. So its about 20 days can't use my Lenovo Vibe Shot.
Please help me If you know how to get out of this issue..
Thanks[/QUOTE]
You need to carefully follow each steps in the method - if you short that magic pin and then connect the USB cable (with battery disconnected), your computer will report seeing the device at either COM port 9008 or 9006. Then you can download the factory image to revive the phone. Of course you need to have the right device driver installed. Like I said, as long as the hardware is not broken, this procedure will succeed for sure.
I love you man!
I love you man! I wish you all the happiness and wealth!:victory::victory::victory::angel::angel::highfive::highfive:
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
samhot66 said:
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
Click to expand...
Click to collapse
You didnt make any twrp backup??
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Rayan19997 said:
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Click to expand...
Click to collapse
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
samhot66 said:
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
Click to expand...
Click to collapse
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
I'm glad to see that you succeeded bro :cyclops:
how can u flash with fastboot while no connection to pc
samhot66 said:
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
Click to expand...
Click to collapse
how can u flash with fastboot while no connection to pc (as u said earlier)
if u did manage to connect to pc, please share how
thanks in advance
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
samhot66 said:
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
Click to expand...
Click to collapse
Read this carefully, this will restore youre phone:
1*.)No matter what youve done with this phone it will be cleanly installed like its fresh new, cause i had couple of problems and this method worked
1.)Download the latest b396 firmware
2.)format youre SD card with basic settings via Windows ( if you have a usb stick to connect youre SD card to computer like i do, if you cant connect youre SD card to computer, use another smartphone and format youre SD card with basic settings)- simply talking just format youre SD card
3.)create --->>>dload<<<--- folder like i wrote down without the --->>><<<--- stuff on youre SD card
4.)paste the update.app file to the dload folder
5.)insert youre SD card to phone
6.)this is the moment of truth hold down volume + & - key and power key all in once until the emui logo appears WARNING: remove all keys after logo appearing WARNING: if the logo doesnt appear even after 30sec. keep still holding until the logo appears
***If you get somekind of error i can help, if it worked youre a lucky guy
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
EFAYSAL said:
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
Click to expand...
Click to collapse
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
SubwayChamp said:
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
Click to expand...
Click to collapse
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
EFAYSAL said:
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
Click to expand...
Click to collapse
Ok, I guess that your device is actually in bootloop and don´t booting.
Tutorial that you followed has many steps and don´t need to do all this to just root device and it contains some files like lk.bin that you can´t be sure that should be for your device.
Some users use this file (lk.bin) of an unlocked device and think that flashng in other device then get unlock it but no need, your device can be unlock it just follow some commands in fastboot mode.
Now you can do the next;
Try to flash again your rom stock (I guess that you don´t have a backup), if for some reason your official tool doesn´t work then use only some images like boot, system and userdata with the scatter.txt to flash them through SP Flash Tool.
Here a link to TWRP https://youtu.be/6vj_BY6xJdA, you can root it with supersu v2.78 0r v2.82 and here some files that can be usefull too https://drive.google.com/uc?id=0BwJgeCYTpnEHNlg2VUlieHFTYVU&export=download
Update steps that you are following to can assist. What extension has your rom and if it is recogniced for SP Flash Tool. I didn´t ask you if you can enter to fastboot mode and if you can then you can know if your bootloader is unlocked typing fastboot oem info
Most info that you give and some screenie will help to understand better
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
EFAYSAL said:
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
Click to expand...
Click to collapse
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
SubwayChamp said:
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
Click to expand...
Click to collapse
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
EFAYSAL said:
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
Click to expand...
Click to collapse
I´m not sure if you are connecting correctly your device at right time and form to can flash it properly. Every device has more or less a specific way to do it. My last alcatel it was connected just with device power off and after to tap on download, but in other device Blu Dash was connected pressing just vol_up and my last mt6757 Bluboo had to press both vol up and down at time to connect to pc and after to tap on download option. To have sure that is well done increase volume in your pc, you will hear a first sound that is cause pc is recognicing but then you have to hear a second sound that is when SPFlashTool is recognicing device and you will see a red line in down side of the tool window, release button inmediately and let tool to work.
This is a good rom for your device according the author is optimized https://droid1311.blogspot.com/2017/08/alcatel-fl02-aka-flash-plus-2-via.html and this is the link directly if you have troubles with pop-up-adds https://drive.google.com/file/d/0BwAGh1drb91SeDZwV1VXbXpjQWM/view
Also you can try with other versions of SP Flash Tool, most stable maybe should be v5,1628 https://androidmtk.com/smart-phone-flash-tool leth me know how you go
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
SPFlashTool 5.1628:
I try all the way with and without pressing any button but no luck . And when it work finishing with error.
SPFlashTool 5.1628:
I try all the way to get that mode but nothing works. So I try to click download button then conect the phone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
EFAYSAL said:
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
I try all the way to get that mode but nothing works. So I try to click download button then conect the pkone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
Click to expand...
Click to collapse
There is a part that is not variable in the way to use this tool, ever you have to tap on download before to connect device and is recommendable too connect cable usb to pc (not yet to device); from here is when the button that you have to press can vary but like I said you before in my last mt6757 (a very similar to yours) works pressing both vol at same time to connect terminal cable to device and now you will see a red line (could be violet-ish)
Try before just flashing only preloader file to recreate some partitions and then do other flash for the other files.
Of course you have to be sure that all drivers are installed correctly cause this tool needs to put your device in download mode (a special level) and also keep it in this state so find VCOM drivers for Alcatel and adb/fastboot installer and try to uninstalling some older drivers that you don´t use and many times we keep in our pcs and for a short data transmission can helo that all the rom move it in same folder where SPFlashTool is allocated.
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
EFAYSAL said:
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
Click to expand...
Click to collapse
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
- In what android version are you, 6.0?
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
- Did you try to flash just preloader, only this file?
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
SubwayChamp said:
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
Click to expand...
Click to collapse
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
SubwayChamp said:
- In what android version are you, 6.0?
Click to expand...
Click to collapse
Yes, last time it was 6.0 before the root
SubwayChamp said:
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
Click to expand...
Click to collapse
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
SubwayChamp said:
- Did you try to flash just preloader, only this file?
Click to expand...
Click to collapse
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
SubwayChamp said:
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
Click to expand...
Click to collapse
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
EFAYSAL said:
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
Yes, last time it was 6.0 before the root
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
Click to expand...
Click to collapse
You need to try two different ways to flash files and restore your device.
First method: fastboot mode
You need to get device enter to fastboot in order to flash some files like system, boot and userdata, then there are two main methods to do it:
- Pressing pwr + vol down
- And I mentioned that sometimes work pressing both volume button + pwr and a menu have to appear to can select an option to enter to (fastboot mode), in some devices this method is not working but you have to try several times attempting to.
Second method: SPFlashTool
You have to ever press first of all Download box and connect terminal cable to pc and the buttons thhat you need to press at time to connec cable usb to your device may vary, sometimes vol down, sometimes both vol but never pwr button; if pc recognice then you have to release all buttone an let it pc continue the flash process.
If SPFlashTool recognice device first flash only preloader file and select now lk.bin too. Flash only these two files and after do again a new flash with the rest of the files, Why you need to do this? your partitions are corrupted and you need to restore them with these files in order to can flash all another files.
Before all of this charge your battery, if you have a cover removable then extract it some minutes and put it again.
Also I read that for this model it´s used this tool instead of SPFlash Tool https://androidmtk.com/download-sugar-mtk-sp-flash-tool (inside the zip you will find a password to start the tool) but I´m not sure what kind of rom it needs, you have to connect your device to begin the process, you will find in product models section in the tool this variant for your device "FL02"
Try first the other tool and then this and let me know how you go, mtk devices are almost unbrickeable so it´s just to find the appropriate way to return it to the life.
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
EFAYSAL said:
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
Click to expand...
Click to collapse
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
I understand that you tried with Sugar tool with no lucky.
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Is there some custom development, recovery, roms for your device?
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
SubwayChamp said:
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
Click to expand...
Click to collapse
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
SubwayChamp said:
I understand that you tried with Sugar tool with no lucky.
Click to expand...
Click to collapse
Yes. After recognizing it keeps trying to download data but no luck.
SubwayChamp said:
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Click to expand...
Click to collapse
I know it is disappointing!. I try this but no luck.
SubwayChamp said:
Is there some custom development, recovery, roms for your device?
Click to expand...
Click to collapse
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
SubwayChamp said:
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
Click to expand...
Click to collapse
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
EFAYSAL said:
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
Yes. After recognizing it keeps trying to download data but no luck.
I know it is disappointing!. I try this but no luck.
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
Click to expand...
Click to collapse
I´ll tell you some ideas with no any specific order that you can try or see if works.
Really very strange that display stays in black, you told me that flashing files through fastboot is working but doesn´t appear not even bootlogo, connect to pc as it is and see how pc recognices in devices manager and my pc if appears like a determined drive d/e/f so it looks that some bad flashing burn your kernel and this case is similar to when a Samsung device need to use jtag method to revive, if in your country no-one knows about Alcatel devices this could be a similar case to what I´m saying then it could be a clue for a technician. I tell you this cause many time ago when I flashed by error a Samsung s4 and only this method revived my device.
Try this, flash your stock recovery only through SPFlash tool and flash after through Alcatel Download tool your stock rom cause some firmwares need to detect stock recovery first to can flash other partitions.
At this stage don´t you have stock recovery, no? so you can try to format data cause sometimes when bootloader is altered then avoid to boot and formatting data can solve this.
If this recovery twrp is for your device you can try flashing through SPFlash tool, you have to put recovery.img and scatter-txt in a same folder. then if succesfull format data, system, wipe cache and dalvik and maybe later try to port some custom rom would be a way to solve this.
To flash any partition through fastboot this is the syntax, just follow one by one any of the files that are in your rom folder so just follow these, if some of then can´t be flashed don´t worry then it´s not flashable:
fastboot flash boot bot.img
fastboot flash cache cache.img
fastboot flash lk lk.bin
and so on till the end
...But after try this if you didn´t get boot to recovery and obviously you can´t delete data nor system then delete first the next partitions trough fastboot typing:
fastboot erase system
fastboot erase cache
fastboot erase userdata
fastboot erase boot
Try all this and let us see how it goes
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
EFAYSAL said:
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
View attachment 4518365
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
Click to expand...
Click to collapse
I see that Sugar tool detects your device like rooted and refuses to flash anything, compare imei number which is in the box, I hope that it couldn´t be changed.
Don´t tell me simply no luck, what it says in SPFlash tool when you tried to flash TWRP and I guess that you put scatter-txt and twrp renamed recovery.img simply in the same folder. Just to be clear, to can flash with this tool your device it has to be off not needed fastboot for this. (provide some screenie)
Other combination of keys to enter to fastboot to flash some partitions when something is missing is, try these three ways:
- Pressing only vol down and at same time connecting to charger (connect first one terminal of cable to your device and then to the charger)
- Pressing the three buttons till a menu appears (you must to release inmediately all)
- Pressing vol up + pwr till a menu appears (you must to release pwr button inmediately) then choose fastboot
In the post 4 I provided a link from Google Drive, in this zip there are 8 items;
- From the item 2 use this version of SP Flash tool, put the four files in a folder and flash them
- In the item 3 you will find some scripts for fastboot, maybe they´re working better and also you have here a subfolder with twrp image.
- And if you get sucessfully install twrp in the item 7 there is a backup with some files to restore from this recovery.
Try one by one and update the info, I hope that your motherboard is not damaged.