Hi all,
I have Note 3 from china (SM-N900)
the build.prop file :
ro.product.model=SM-N900P
ro.build.display.id=KTU84P.N900PVPUDNK4
ro.build.version.incremental=N900PVPUDNK4
the base band version is : N900DDUEBOB1
the pb that is kies/kies3 or smart switch can't detect my phone (usb debug turn on)
adb devices -l : this command work fine
and odin3 detect phone.
I want upgarde it to 5.0, can any one help me?
also can i install this sock firmware N900XXUEBOE3_N900ODDEBOB2_INS ??
Best regards
If I understand what you have stated, you have note 3 from china. With a operating system of Kit Kat NK4 (Sprint ) with a baseband from Lollipop 5.0 ( India version) based on the info I got here http://androidromupdate.com/galaxy-note-3-sm-n900-stock-firmware-from-official-lollipop-update/ . I don't think you can install that firmware as it is for a Exynos based processor ( international ) Note 3, the Sprint Note 3 has a Snapdragon processor. However if you do have a Exynos processor then here is one way on how to do it http://forum.xda-developers.com/galaxy-note-3/general/n900-one-guide-t3252033 installing the Xposed app is optional. This answer is based on the assumption the device is domestically unlocked.
thanks for your reply,
so why kies/kies3 and smartswitch can't detect my phone? there is no notification in status bar.
Did you try this https://www.youtube.com/watch?v=vBNclp5LfR8 . . .
---------- Post added at 11:29 AM ---------- Previous post was at 11:06 AM ----------
You could also try this http://forum.xda-developers.com/showthread.php?t=2479557&page=2 . . . read post #15
i think i found the problem, my phone contain wrong rom
when i see my model under battery is : SM-N900, SSN :N900GSMH
i use anTuTu benchmark application CPU model : samsung exynos 5420
imei.info give me this : SAMSUNG N9005 Galaxy Note 3
Ok that is an unlocked international note 3 based on the info here http://forum.xda-developers.com/showthread.php?t=2574886 it can be used on all carriers. It has the Exynos 5 Octa-core processor. So I think your right its not recognizing kies because the wrong OS is installed on the device, that OS is for a snapdragon processor. To answer your original question, yes you can install N900XXUEBOE3_N900ODDEBOB2_INS based on the info here http://androidromupdate.com/galaxy-note-3-sm-n900-stock-firmware-from-official-lollipop-update/. . . once you get the right OS installed it should recognize kies.
thank you very, i have rotted my phone and install TWRP, and install this rom STOCK_DEODEXED_N900PVPUEOC5 (from here http://forum.xda-developers.com/note-3-sprint/development/rom-t3132662 ), its baseb sprint rom 5.0 , now kies recognize my phone, i have two questions :
1- can i install Galaxy Note 3 (Exynos) rom 5.0 ?
2- i want add base.band for europe, how can i do ?
Best regards
Yes you can install lollipop 5.0 ( Exynos ) on your device. You would have to go to the "Samsung Galaxy Note 3" forum and try to find a version of lollipop 5.0 for the country you need it to work in. That lollipop rom has to be in a flashable zip file that you can place on your sd card, then boot into recovery wipe system, cache, and delvik-cache only then install ( flash ) the OS zip file, you won't lose root.
If you can't find a version of lollipop 5.0 in the XDA forum then go here http://www.sammobile.com/firmwares/database/SM-N900/ . . . You will have to register with sammobile its easy and free. They have every country lollipop 5.0 there in a stock original unrooted zip. You will have to boot into download mode and odin flash this Lollipop 5.0 OS, flash it TWICE to make sure your device back to original stock OS. It will take back to stock original like you just bought the device. From there you will have to install TWRP and root again, for more info click on Samsung note 3 rom flashing basics in my signature below or click here http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 . . .
Related
I am searching for the Star Ulefone U658 official rom
This one is from other device (mp), not alps
System files from this rom is read only so no possible to intsall busybox and correct root the phone
Antunu shows the device as mp856 with mtk6592 (octa) and resolution 1920x1024
If someone have this phone,I ll be greatfull to get a nandroid from his official rom
Thanks in advance
Ok I got from the manufactor and is uploaded as update in needrom, if someone need it
Looking for this build version
2106_v89_gq3010_hd_20131016
Does anyone have the phone with this build version?
Or with any other rom except 2106_v89_gq3010hd_op_20140103
the new firmware(2014-5) is pending ,will be available next week
New firmware will coming soon,now you'd better to scan your device first by Kaspersky (security 10), confirm it is working ok .
Hello ,
i have the model of the title and the installed version of android is 4.1.1 . I bought in the past other 2 same models but these had installed 4.1.2 that is more stable.
At the site of i-onik has 3 downloads for this model on section previous models. i download all of them but nothing update my version of android. The big one i do not know what is it and how i can install it, or something else. Any help will be great.
Thanks
bought this iphone 8 plus clone and well i had problems with language, it's all in chinese. so i started experimenting and now i messed the phone up to the point where only thing i can do is flash it using flashtool
Info i have:
Cpu MTK6582
1GB RAM
Android 4.4
Baseband v: MOLY.WR8.W1431.MD.TG.SP.V1
Step 1: Download and extract the iPhone 8 plus Clone stock firmware on your computer.
Step 2: After extracting, you will be able to get the Firmware File, Flash Tool, Driver and How-to Flash Guide.
Step 3: Install USB Driver on your Computer
STEP 4 : After that click on the Download Tab when the Smart Phone Flash Tool is launched,.
STEP 5: In the Download Tab, you should click on the scatter-loading button
STEP 6 : After that Locate the scatter file
After that connect your device to your computer using a USB cable. Then The flashing will begin automatically
Hi, Thanks Ramiki for your response.
The firmware that you put a link for me is iPhone 8 clone, but my device is iPhone 8 plus clone, in addition, the one that you mentioned is mt6580, mine is mt6582. are there any differences between them for flashing firmware?
Illia73 said:
Hi, Thanks Ramiki for your response.
The firmware that you put a link for me is iPhone 8 clone, but my device is iPhone 8 plus clone, in addition, the one that you mentioned is mt6580, mine is mt6582. are there any differences between them for flashing firmware?
Click to expand...
Click to collapse
Sorry sorry :| My fault. Clone Iphone 8 Plus S209_8P_H_EN_V0.2.5
is this goophone or original copy of iphone?
they Dont mention whether rom is mt6580 or 6582. so try
ramiki said:
Step 1: and extract the iPhone 8 plus Clone stock firmware on your computer.
Step 2: After extracting, you will be able to get the Firmware File, Flash Tool, Driver and How-to Flash Guide.
Step 3: Install USB Driver on your Computer
STEP 4 : After that click on the Download Tab when the Smart Phone Flash Tool is launched,.
STEP 5: In the Download Tab, you should click on the scatter-loading button
STEP 6 : After that Locate the scatter file
After that connect your device to your computer using a USB cable. Then The flashing will begin automatically
Click to expand...
Click to collapse
ramiki said:
Sorry sorry :| My fault. Clone S209_8P_H_EN_V0.2.5
is this goophone or original copy of iphone?
they Dont mention whether rom is mt6580 or 6582. so try
Click to expand...
Click to collapse
It's original copy of iPhone. thanks a million Ramiki
Afrer I installed the firmware for iPhone 8 plus clone, it shows black screen but it works, I see nothing just some sounds and touches which means it's working. I also tried volume down + power key, and any other keys to wipe data but nothing changed. and then also redownloaded my backup firmware, and again nothing changed. it doesn't even show logo screen. what should I do?
The firmware posted above by Ramiki was for a version running the MT6580 chip and NOT the MT6582 Chip. Can someone please be kind enough to post the CORRECT firmware or to explain how to modify the one posted above to successfully load?
redmachodevil said:
The firmware posted above by Ramiki was for a version running the MT6580 chip and NOT the MT6582 Chip. Can someone please be kind enough to post the CORRECT firmware or to explain how to modify the one posted above to successfully load?
Click to expand...
Click to collapse
please I have the same problem with you can you help me with flash for i phone 8 plus chip mtk 6582?
use this firmware will solve your problem
https://drive.google.com/uc?id=1qK5zLQOPHmUPn4drni57A3W4_HDu85N9&export=download
Illia73 said:
Afrer I installed the firmware for iPhone 8 plus clone, it shows black screen but it works, I see nothing just some sounds and touches which means it's working. I also tried volume down + power key, and any other keys to wipe data but nothing changed. and then also redownloaded my backup firmware, and again nothing changed. it doesn't even show logo screen. what should I do?
Click to expand...
Click to collapse
I flashed my iphone 8 clone with a firmware 7.0 , the screen went black . any help plz?
Need Help : Correct Firmware
MuhammadJihad said:
I flashed my iphone 8 clone with a firmware 7.0 , the screen went black . any help plz?
Click to expand...
Click to collapse
Hi
kindly help the same problem with me i have flashed my device with wrong firmware got from various sites hence device screen got black but its working i think there is any LCD Driver issue, now i am unable to find correct firmware for my device even i have tried around 15-20 different different flash files but not working. please help me to get it back. i have taken snapshot of device info before it got bricked, please have below details and help me please.
Brand : iphone8
Model : MN4A2ZPA
Android : 5.1
Kernel Version : Linux version 3.10.72 ([email protected]) (gcc version 4.8 (GCC) #1 SMP PREEMPT Wed jan 17 18:19:09 CST 2018
CPU : MT6580M
Resolution : 960 x 540
RAM : 512MB
ROM : 2GB
please provide if anybody have correct firmware
Great.
But we need the password to unzip the file
Could you...?
Thank you
Needed firmware iphone 8 plus clone a match
I can't run flashing because it's type not match.
I have type firmware code-516 while the target need type code-519.., Where I get the type please help me?
Hi,
I have an Iphone 8 clone (mt6582) that had a very laggy ios inteface so i flashed another ROM and lost radio signal (unknon baseband).
So i found after lots of reasearch 2 roms:
- 1st one had a working baseband but no ios UI and a little laggy(not as much as original one)
- 2nd one has an IOS 10 fluid interface but no radio
I tried to make a copy of NVRAM from 1st one using diferent tehnique to put it on 2nd rom but didn't worked,
Can anyone help me please?
I have to mention the original firmware was reporting:
-IOS 11.2.6 (15D100)
- Model: MNRJ2CH/A
-the MTK Droid Tools were reporting that inside the kernel was modified the info to show MT6589 instead of MT6582
build data was 2015/05/15 (i saw couple of clones with this date)
Hello, excuse me for my language certainly unsuitable, I am french and I use Google Traduction.
I own an old Samsung Galaxy S5 SM-G900T ref so T-Mobile, but unlocked any operator that works perfectly.
I would like to use it to do the application tests
I installed with Odin the latest rom available on samfirmware: KLTETMO: G900TUVS1GQA2_G900TTMB1GQA2_G900TUVS1GQA2 so Android 6.0.1
then I installed the Root CF-Auto-Root-kltetmo-kltetmo-smg900t.tar and finally I removed all the unitile applications to have a bare minimum and make it fast enough.
With the application "Phone Info Samsung", I only have the CSC "TMB", normal it is a T-Mobile
The processor is: MSM8974 / MSM8974PRO 32 bit
The GPU is: Qualcomm Adreno 330
The modem is: MSM8974Pro
REV 1.0 Hardware
RAM 2Gb
1080x1920 screen, 5.2 inches, 424ppi, 480dpi
1ST: CSC "TMB" I would like to have a CSC "XEF"?
2EME: I would like deleted this logo T_Mobile (horrible) at the start and stop of the mobile.
3EME: Is it possible to unblock the kernel to install the G900FXXS1CQD rom intended for model SM-G900F European model and so have the CSC "XEF"
In advance, thank you for your answers
cordially
Montero7o said:
Hello, excuse me for my language certainly unsuitable, I am french and I use Google Traduction.
I own an old Samsung Galaxy S5 SM-G900T ref so T-Mobile, but unlocked any operator that works perfectly.
I would like to use it to do the application tests
I installed with Odin the latest rom available on samfirmware: KLTETMO: G900TUVS1GQA2_G900TTMB1GQA2_G900TUVS1GQA2 so Android 6.0.1
then I installed the Root CF-Auto-Root-kltetmo-kltetmo-smg900t.tar and finally I removed all the unitile applications to have a bare minimum and make it fast enough.
it should be relatively easy to use one of the patched versions of odin to change the firmware. i know that 1 of the 3 cscs is permanant. shouldnt really matter in most applications. just search the forum for patched odin. many of the patches ignore the model match check and should flash the F varient you need. also the many hard working devs here have created more than one rom that will leave it barebones and blazing fast as well as install android versions as high as 10
Click to expand...
Click to collapse
it should be relatively easy to use one of the patched versions of odin to change the firmware. i know that 1 of the 3 cscs is permanant. shouldnt really matter in most applications. just search the forum for patched odin. many of the patches ignore the model match check and should flash the F varient you need. also the many hard working devs here have created more than one rom that will leave it barebones and blazing fast as well as install android versions as high as 10.
ps apologies for the reply faux pa
dopeyone2011 said:
it should be relatively easy to use one of the patched versions of odin to change the firmware. i know that 1 of the 3 cscs is permanant. shouldnt really matter in most applications. just search the forum for patched odin. many of the patches ignore the model match check and should flash the F varient you need. also the many hard working devs here have created more than one rom that will leave it barebones and blazing fast as well as install android versions as high as 10.
ps apologies for the reply faux pa
Click to expand...
Click to collapse
Have you done it?
I'm using the SM-A505FN version but yesterday in sammobile firmware list, I saw that on SM-A505F One UI 3.0 already available so that I try to install the version but I didn't know that it will give me huge trouble. While installing in Odin stuck for 1 hour. Then I realize maybe it's a version difference. So reboot the device and then I saw this error.
I saw a few forum posts that if I flash again with Odin it will be solved but it won't. Because those ( SM-A505F ) versions changed my kernel from 6 to 7, Now I can't install any downgrade firmware and my phone stuck at this error. When I try to install the regular firmware it's giving me another error which is " Check fail (bootloader) Device 7 Binary 6 " Now I can't install anything. Is there any way to solve this problem until One UI 3.0 hasn't released for my model? Like using TWRP or any custom recovery?
Hi, ma friend!
Try to flash the latest firmware for your device model and region, but load only AP, CP and CSC files by skipping the BL (bootloader - leave it blank).
Device 7 binary 6. Means no, your device bootloader is newer than your package/binary your attempting to install. I don't know how to fix that. I've heard of cracked versions of Odin that won't do version checking for some devices but I never got one to work because the phone rejects it, not Odin. Maybe if you had a backup of the entire phone you could dd the entire nand. I think your best bet is trying different roms with One UI 3.1. Good luck.
There is Android 11 with One UI 3.1 update for FN models in Poland (XEO). You can download it and flash it. I've already done it.
Idem lo stesso problema, non fa tornare indietro
Translation: Ditto the same problem, it doesn't go back
Zdrawko0o said:
Hi, ma friend!
Try to flash the latest firmware for your device model and region, but load only AP, CP and CSC files by skipping the BL (bootloader - leave it blank).
Click to expand...
Click to collapse
Do I have to enable OEM Unlock or USB Debugging for this?
JoaoVLA7 said:
Do I have to enable OEM Unlock or USB Debugging for this?
Click to expand...
Click to collapse
What are you going to do? If you are about to use Odin flash tool, the only thing is needed is entering download mode of your Samsung device.
Zdrawko0o said:
What are you going to do? If you are about to use Odin flash tool, the only thing is needed is entering download mode of your Samsung device.
Click to expand...
Click to collapse
I want to go back to Android 9, currently my A50 is using Android 11, which is binary 7 and Android 9 is binary 5.
I want to use Odin. You said to just deselect the bootloader installation, so I don't need to activate either USB debugging or OEM unlocking?
JoaoVLA7 said:
I want to go back to Android 9, currently my A50 is using Android 11, which is binary 7 and Android 9 is binary 5.
Click to expand...
Click to collapse
I don't think it is possible for now. After updating to Android 11, the bootloader won't let you install any ROM below Android 11. You can downgrade by installing a custom rom using custom recovery like TWRP.
Zdrawko0o said:
I don't think it is possible for now. After updating to Android 11, the bootloader won't let you install any ROM below Android 11. You can downgrade by installing a custom rom using custom recovery like TWRP.
Click to expand...
Click to collapse
Ok, I got it.
Do you recommend any Custom ROM that focuses on battery life?
Thanks for answering.
JoaoVLA7 said:
Ok, I got it.
Do you recommend any Custom ROM that focuses on battery life?
Thanks for answering.
Click to expand...
Click to collapse
[ROM][OneUI 4.1.1][A50] Fresh - Love Your Phone Again (Updated 4/11/2023)
Fresh for the Samsung Galaxy A50 Love your phone again Get the latest Fresh release for the Samsung Galaxy A50 Current Version: 4.5.0 (23040901) - Android 12 Installing a third-party kernel and/or recovery is at your own risk...
forum.xda-developers.com
I'm not sure if this will downgrade your device. There is a chance your device not to boot up after installing custom ROM with lower Android version. Give it a try and write us back.
Zdrawko0o said:
[ROM][OneUI 4.1.1][A50] Fresh - Love Your Phone Again (Updated 4/11/2023)
Fresh for the Samsung Galaxy A50 Love your phone again Get the latest Fresh release for the Samsung Galaxy A50 Current Version: 4.5.0 (23040901) - Android 12 Installing a third-party kernel and/or recovery is at your own risk...
forum.xda-developers.com
I'm not sure if this will downgrade your device. There is a chance your device not to boot up after installing custom ROM with lower Android version. Give it a try and write us back.
Click to expand...
Click to collapse
My phone model is SM-A505GT, it looks like this ROM was not made for this model.
I'm going to search ROMs for my phone model. Thanks for the suggestion anyway.