Hey y'all! Sorry to bug ya, but my XT1528 Vz Moto E is wifi-less I was tinkering around, trying to get s-off through a combination of sunshine+kingroot, and when I mucked that up, I just restored to the stock rom posted on Mega. Unfortunately, alot of errors popped up in fastboot and now wifi is unusable :crying: DOES ANYBODY KNOW HOW TO FIX THIS?
You restored the same version firmware you had when you bought it ?
Or a newer version or alternate carrier version ?
Also did you have 5.0 originally then put on 5.1 ?
I screwed up my wifi before doing that eh..
Make sure you have Otus or Surnia properly picked out (for which you have / need)
brookemels said:
Hey y'all! Sorry to bug ya, but my XT1528 Vz Moto E is wifi-less I was tinkering around, trying to get s-off through a combination of sunshine+kingroot, and when I mucked that up, I just restored to the stock rom posted on Mega. Unfortunately, alot of errors popped up in fastboot and now wifi is unusable :crying: DOES ANYBODY KNOW HOW TO FIX THIS?
Click to expand...
Click to collapse
S-Off? This is a Motorola S-off is for HTC. Also, I don't think you can fastboot flash a Verizon Moto E, as it's locked.
cmason37 said:
S-Off? This is a Motorola S-off is for HTC. Also, I don't think you can fastboot flash a Verizon Moto E, as it's locked.
Click to expand...
Click to collapse
You can't even unlock the bootloader on the VZ variant or mount system as r/w, so not sure what their S-off attempt did.
Ace42 said:
You can't even unlock the bootloader on the VZ variant or mount system as r/w, so not sure what their S-off attempt did.
Click to expand...
Click to collapse
Whatever he did, he most likely permanently screwed his phone up.
xpmule said:
You restored the same version firmware you had when you bought it ?
Or a newer version or alternate carrier version ?
Also did you have 5.0 originally then put on 5.1 ?
I screwed up my wifi before doing that eh..
Make sure you have Otus or Surnia properly picked out (for which you have / need)
Click to expand...
Click to collapse
So I solved the problem. Apparently, the theres TWO flavors of Verizon's 5.1, and I was flashing the older one. Also, I adapted my mfastboot commands to be similar to the ones in the script included in the firmware. So now wifis back in action! Thanks for your time!
cmason37 said:
S-Off? This is a Motorola S-off is for HTC. Also, I don't think you can fastboot flash a Verizon Moto E, as it's locked.
Click to expand...
Click to collapse
If I'm not mistaken, the Vz Moto E would be able to have S-off except there's no way to achieve even temp root on 5.1
cmason37 said:
Whatever he did, he most likely permanently screwed his phone up.
Click to expand...
Click to collapse
Sorry, but my phones up an running again also, I'm a girl xD
brookemels said:
So I solved the problem. Apparently, the theres TWO flavors of Verizon's 5.1, and I was flashing the older one. Also, I adapted my mfastboot commands to be similar to the ones in the script included in the firmware. So now wifis back in action! Thanks for your time!
Click to expand...
Click to collapse
Hi,
I am in a similar solution, can you send me the link for the verizon xt1528. THank you very much
brookemels said:
So I solved the problem. Apparently, the theres TWO flavors of Verizon's 5.1, and I was flashing the older one. Also, I adapted my mfastboot commands to be similar to the ones in the script included in the firmware. So now wifis back in action! Thanks for your time!
Click to expand...
Click to collapse
I also disabled my Wi-Fi accidentally. I had to get a new Moto E to replace it -- what did you do to restore it? Could you kindly detail the steps for noobs?
andxdrewx said:
I also disabled my Wi-Fi accidentally. I had to get a new Moto E to replace it -- what did you do to restore it? Could you kindly detail the steps for noobs?
Click to expand...
Click to collapse
Hey y'all! Sorry for silent! In between college and looking for exploits in the XT1528 bootloader, I have had NO time whatsoever :crying: Its rather aggravating, these variants of popular phones with locked down bootloaders! but after seeing Moto unlock the Vz X 2014 bl, I remain hopeful!
In order to do a proper restore, you need to get the XT1528_SURNIA_VERIZON_5.1_LPI23.29-17.5_cid2_subsidy-DEFAULT_CFC.xml.zip file from FileFactory/MEGA (link down bellow)
Flash in this order;
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase carrier
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
Unfortunately, this will mean loosing your data, but better than a shiny brick!
MEGA: https://mega.nz/#F!p9sxCaqR!Ja2kfKiL_0Hi3_SsKizjKw!FlMx1A5R
FileFactory: http://www.filefactory.com/file/233...PI23.29-17.5_cid2_subsidy-DEFAULT_CFC.xml.zip
HAPPY FLASHING!
Related
hello I try everything and cant make my phone to work, I'm asking to somebody if can help me to upload a moto e 2nd gen. XT1526 SPRINT Backup, I made my backup and save it in a different sd card but for some reason, it wipe it and delete everything on the memory
Are you asking for someone to link you to the ROM you need? I'm not following you.
Mdkcheatz said:
Are you asking for someone to link you to the ROM you need? I'm not following you.
Click to expand...
Click to collapse
sorry, I didn't be to explicit, yea Im asking to somebody to link me a rom or a nandroid backup or a twrp backup of the moto e tx1526 cdma sprint, because I already try almost all of the roms and non of them still working for me, and I delete accidently my own backup.
or probably still not release some sprint rom's?
I didn't find your specific ROM yet but there were XT1526 ROMs which may help from this note I made for myself back when I needed mine... Its possible that a similar ROM may work for you. Just make sure you are using GSM version if you are GSM and vice versa: Installing incompatible firmware can lead to hard bricking.
Do not rely on these links to last. Some are already down.
RETUS = Retail US
TMO = T-Mobile
This is the only source of leaked Moto E Firmware. Some Links are down. The XT1527 TMO (T-Mobile subsidy) version works but it may lock only to Tmobile. I assume you can flash to any of those carriers to inherit their subsidy.
FileFactory
Flashing a compatible ROM will not:
Mess up Fastboot
Lock bootloader (it is possible to lock it, however, locking* the bootloader could screw up your last chance of restore.
Flash a compatible ROM will:
Overwrite Recovery (easily reflashed)
Remove Root (easily reflash)
Reset everything to near factory settings.
Fix Baseband
To reflash ROM:
I've put together some commands that are needed to flash the rom files. Copy and save as [any_file_name].bat
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot oem config carrier vzw
fastboot oem fb_mode_clear
Save .bat file to the same directory as the rom files.
Have Fastboot installed.
Have Moto Drivers installed.
Boot Moto into Fastboot mode
Load terminal and confirm connection to device. (Type "fastboot devices")
$cd into a folder with extracted .xml files.
In terminal, type [name_you_gave_file].bat and it should automatically start flashing the rom files.
Reboot phone and it should be* restored.
---------- Post added at 12:28 AM ---------- Previous post was at 12:26 AM ----------
Sorry the link didn't parse:
http://www.filefactory.com/folder/752fdb49361c7f62/?sort=filename&order=ASC&show=100&page=2
Try one of these three XT1526 ROMS (actually 2: the boost subsidy version won't help you obviously)
Good luck!
luzbel3821 said:
sorry, I didn't be to explicit, yea Im asking to somebody to link me a rom or a nandroid backup or a twrp backup of the moto e tx1526 cdma sprint, because I already try almost all of the roms and non of them still working for me, and I delete accidently my own backup.
or probably still not release some sprint rom's?
Click to expand...
Click to collapse
Hi, did you manage to solve your issue? I am also in the same boat, looking forsprint moto e stock 5.1 firmware or comatible. Didyou have any success?
dreckgos said:
Hi, did you manage to solve your issue? I am also in the same boat, looking forsprint moto e stock 5.1 firmware or comatible. Didyou have any success?
Click to expand...
Click to collapse
rom for sprint didn't come out yet, but this rom work perfect on sprint network http://www.filefactory.com/file/6be...XI22.50-14.8_cid9_subsidy-DEFAULT_CFC.xml.zip
its on the last post by Mdkcheatz, just follow the instruccions
luzbel3821 said:
rom for sprint didn't come out yet, but this rom work perfect on sprint network http://www.filefactory.com/file/6be...XI22.50-14.8_cid9_subsidy-DEFAULT_CFC.xml.zip
its on the last post by Mdkcheatz, just follow the instruccions
Click to expand...
Click to collapse
Hm, I tried the 5.1 boost ROM from the same site, but I got a bootloop if only flashing system and hang on boot if following the full process....
dreckgos said:
Hm, I tried the 5.1 boost ROM from the same site, but I got a bootloop if only flashing system and hang on boot if following the full process....
Click to expand...
Click to collapse
Huh, I tried again and this time it worked. The problem was that previously I used a script to flash and it did not include a fastboot invocation for the last piece of the system image.
Yea that does to me too, but don't use BOOST 5.1 instead use Boost 5.0.2 and once you started it will ask you on your phone to OTA upgrade
dreckgos said:
Huh, I tried again and this time it worked. The problem was that previously I used a script to flash and it did not include a fastboot invocation for the last piece of the system image.
Click to expand...
Click to collapse
but no luck for me getting this message, any solution?
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.007s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.358s
alshanu said:
but no luck for me getting this message, any solution?
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.007s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.358s
Click to expand...
Click to collapse
Did you make sure to unlock your bootloader?
Also, you shouldn't bump a year-old topic.
xtermmin said:
Did you make sure to unlock your bootloader?
Also, you shouldn't bump a year-old topic.
Click to expand...
Click to collapse
Ya I gave up. Thank you
I tried to flash a downgrade image to my moto e 2nd gen. Now Im stuck in bootloader and a warning message for unlocked bootloder. Ive tried to flash logo.bin, and other images aswell with no luck. It keeps asking me to install a valid signed images, I don't know where to find these images. Please help!
You need to do exactly what it's asking you to do - flash valid signed images. Which model do you have (XT152x)? Which region are you in? Which version were you downgrading from?
Just so you know, downgrading the stock ROM is very highly discouraged as it can cause bricking in certain circumstances. In particular, never try to downgrade the stock ROM when the bootloader is locked. You can try flashing back the upgraded images and seeing if your phone accepts them. Be aware that the signed images must match your model number and region.
squid2 said:
You need to do exactly what it's asking you to do - flash valid signed images. Which model do you have (XT152x)? Which region are you in? Which version were you downgrading from?
Just so you know, downgrading the stock ROM is very highly discouraged as it can cause bricking in certain circumstances. In particular, never try to downgrade the stock ROM when the bootloader is locked. You can try flashing back the upgraded images and seeing if your phone accepts them. Be aware that the signed images must match your model number and region.
Click to expand...
Click to collapse
Thanks for reply.
I don't have these images, where to get them? My model is xt1524reteuall, I'm in europe/sweden and I downgraded from stock Lollipop 5.0.2
I did unlock the bootloader via motorolas site.
pemhak said:
Thanks for reply.
I don't have these images, where to get them? My model is xt1524reteuall, I'm in europe/sweden and I downgraded from stock Lollipop 5.0.2
I did unlock the bootloader via motorolas site.
Click to expand...
Click to collapse
Hmm, so you went from a newer 5.0.2 build to an old 5.0.2 build? What were you downgrading to?
Go to this folder: https://mega.nz/#F!rMIhDLgR!oq5Cz_XbgZLEEysmqoYtcA
Navigate to Surnia ->5.0.2
Look for the file XT1524_RETEUALL_MOTOE2... (it's near the middle of the list)
Download and try flashing everything it in using fastboot.
squid2 said:
You need to do exactly what it's asking you to do - flash valid signed images. Which model do you have (XT152x)? Which region are you in? Which version were you downgrading from?
Just so you know, downgrading the stock ROM is very highly discouraged as it can cause bricking in certain circumstances. In particular, never try to downgrade the stock ROM when the bootloader is locked. You can try flashing back the upgraded images and seeing if your phone accepts them. Be aware that the signed images must match your model number and region.
Click to expand...
Click to collapse
Thanks for reply.
I don't have these images, where to get them? My model is xt1524reteuall, I'm in europe/sweden and I downgraded from stock Lollipop 5.0.2
I did unlock the bootloader via motorolas site.
I got my device back!! I did succeed to flash it with this rom "surnia_stock_5.0.2.zip" with TWRP. I did not have the patience to wait at the Motorola logo when booting, I have to wait 2-3 min and 2-3 min for services to start. for the device to boot. But now it doesn't register any sim card when at desktop?!?
squid2 said:
Hmm, so you went from a newer 5.0.2 build to an old 5.0.2 build? What were you downgrading to?
Go to this folder:
Navigate to Surnia ->5.0.2
Look for the file XT1524_RETEUALL_MOTOE2... (it's near the middle of the list)
Download and try flashing everything it in using fastboot.
Click to expand...
Click to collapse
I was downgrading to kitkat 4.4.4 due to poor battery in lollipop 5.0.2. I'm downloading a xt1524reteuall rom right now but ir is going slowly.
pemhak said:
I was downgrading to kitkat 4.4.4 due to poor battery in lollipop 5.0.2. I'm downloading a xt1524reteuall rom right now but ir is going slowly.
Click to expand...
Click to collapse
Oh, you must have flashed something really wrong then. There are no 4.4.4 ROMs for this device. You would have flashed something totally incompatible and highly risky if you flashed 4.4.4 from somewhere. That may have wrecked your modem software too. Download and flash the proper XT1524-specific software with the correct modem. If you are unhappy with the performance of the stock ROM, you can flash scritch007's CM12.1.
squid2 said:
Oh, you must have flashed something really wrong then. There are no 4.4.4 ROMs for this device. You would have flashed something totally incompatible and highly risky if you flashed 4.4.4 from somewhere. That may have wrecked your modem software too. Download and flash the proper XT1524-specific software with the correct modem. If you are unhappy with the performance of the stock ROM, you can flash scritch007's CM12.1.
Click to expand...
Click to collapse
Ok, thanks. I will wait for download to complete and flash that image.
pemhak said:
Ok, thanks. I will wait for download to complete and flash that image.
Click to expand...
Click to collapse
Hi! Did you solve your problem? I'm kind of stuck on same problem and with no working solution yet.
EDIT: I tried the @squid2 with no success. Maybe I will send the phone to waranty....
Noeljunior said:
Hi! Did you solve your problem? I'm kind of stuck on same problem and with no working solution yet.
EDIT: I tried the @squid2 with no success. Maybe I will send the phone to waranty....
Click to expand...
Click to collapse
I did solve the problem with these steps.
1. Find and download the files for your region.
2. Unzip files to a folder with fastboot and adb.
3. Create stock.bat with these commands and run stock.bat within the same folder as above files.
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot oem config carrier vzw
fastboot oem fb_mode_clear
fastboot reboot
(4. I needed to reunlock my Moto E 2nd Gen at Motorolas site, because i did relock it.)
5. Get into bootloader menu and flash this TWRP image (i can email it to you) within the same folder and flash it with fastboot.
6. Restart phone. Wait 2-3 minutes so it boots into android.
7. Hope I made it clear enough to follow the instructions, if you got questions please reply and I try to answer them. Sorry for my poor english.
pemhak said:
I did solve the problem with these steps.
1. Find and download the files for your region.
2. Unzip files to a folder with fastboot and adb.
3. Create stock.bat with these commands and run stock.bat within the same folder as above files.
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot oem config carrier vzw
fastboot oem fb_mode_clear
fastboot reboot
(4. I needed to reunlock my Moto E 2nd Gen at Motorolas site, because i did relock it.)
5. Get into bootloader menu and flash this TWRP image (i can email it to you) within the same folder and flash it with fastboot.
6. Restart phone. Wait 2-3 minutes so it boots into android.
7. Hope I made it clear enough to follow the instructions, if you got questions please reply and I try to answer them. Sorry for my poor english.
Click to expand...
Click to collapse
And I'm back with my Moto E! Thank you! I wasn't doing some of those commands and with all those commands it works! Thank you!
Hello all,
I currently have a Moto Z XT1650-05 SHERIDAN Dual Sim from China. I tried to install TWRP and root it but messed it all up. Now I am stuck in a bootloop. I tried to flash the stock rom in mfastboot using the XT1650-05 GRIFFIN China Stock ROM but it gets to the "Erasing" screen with a droid and keeps looping from there.
Have tried to google all over for a "SHERIDAN" ROM but not able to find one either. Could any kind soul here point me in the right direction to save my device?
Thanks so much in advance!
You can download stock firmware from there:
http://forum.xda-developers.com/moto-z/development/moto-z-official-firmware-downloads-t3449837
use mfastboot to flash it.
alphaeva said:
You can download stock firmware from there:
http://forum.xda-developers.com/moto-z/development/moto-z-official-firmware-downloads-t3449837
use mfastboot to flash it.
Click to expand...
Click to collapse
Thanks for the reply. Unfortunately this list does not include the Sheridan variant, only the Griffin ones. It's okay, I managed to figure out a workaround.
how u install goggle play in china version?
...
Just flash any Griffin firmware, for safety you should first delete gpt and bootloader IMG. These variants share their firmware with each other, according to website spec info.
Sent from my XT1650 using XDA-Developers mobile app
I have the same trouble with my European version. I tried to flash a griffin version and now it is stuck in bootloop
I had the same issue awhile ago. I fixed it by using the ADB command prompts version and installing it piece by piece. It took longer but works flawlessly now. The directions are somewhere in the forums Ill see if I can find them.
Here is the command I use to flash the ROM
Code:
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash system system.img_sparsechunk.8
mfastboot flash system system.img_sparsechunk.9
mfastboot flash system system.img_sparsechunk.10
mfastboot flash system system.img_sparsechunk.11
mfastboot flash system system.img_sparsechunk.12
mfastboot flash system system.img_sparsechunk.13
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
erase partition.gpt
evanxyj said:
Just flash any Griffin firmware, for safety you should first delete gpt and bootloader IMG. These variants share their firmware with each other, according to website spec info.
Sent from my XT1650 using XDA-Developers mobile app
Click to expand...
Click to collapse
hi, how can erase partition gpt?
because is the only one with errors in fastboot load rom
thanx
rvinturis said:
hi, how can erase partition gpt?
because is the only one with errors in fastboot load rom
thanx
Click to expand...
Click to collapse
Sorry. No idea about your situation, but instinct tells me you are mostly fxxked up if you mess up with gpt partition.
Sent from my OnePlus3T using XDA Labs
I try to install stock rom for motorola xt 1650-03 griffin , but was not good idea . Because is not genuine for my moto z Sheridan . Now my moto work like a charm but during the start up , remain in fastboot mode, after that must push the power button in start for continue start up process. Afterthat everything is normal. My moto z Sheridan have unlock bootloader, no Root and official firmware 7.0
---------- Post added at 01:36 PM ---------- Previous post was at 01:34 PM ----------
I cannot find stok rom nougat for Sheridan european model. Xt1650-03.
rvinturis said:
Now my moto work like a charm but during the start up , remain in fastboot mode, after that must push the power button in start for continue start up process.
I cannot find stok rom nougat for Sheridan european model. Xt1650-03.
Click to expand...
Click to collapse
To fix stuck @ bootloader (START only) - on bootloader, run:
Code:
fastboot oem fb_mode_clear
Then restart it, tell me if it helps
i have the same problem, have xt1650-03 sheridan, i can use some roms, but i want a stock rom and lock the bootloader bsecause my bluetooth died.
fastboot oem fb_mode_clear it works.
HELP!
solitudinal said:
Thanks for the reply. Unfortunately this list does not include the Sheridan variant, only the Griffin ones. It's okay, I managed to figure out a workaround.
Click to expand...
Click to collapse
please tell me what you have done because im stuck with the same problem
help!
solitudinal said:
Thanks for the reply. Unfortunately this list does not include the Sheridan variant, only the Griffin ones. It's okay, I managed to figure out a workaround.
Click to expand...
Click to collapse
please tell what was the workaround because im facing the same problem and dont know what to do!!!:crying:
As the title says.
Does anybody have any updated Radio / bootloader zips that I can flash via TWRP ?
I have an old Moto E Condor and I can't get the phone to recognize the Sim so was wondering if updating the radio / bootloader would help ?
I'm running out of ideas.
I have tried Android 6 & 7 tried different Sims.
I'm not sure how I would find out if it's a hardware issue rather than software ?
Any ideas ?
Thanks
Check this link for Radio file
https://forum.xda-developers.com/devdb/project/dl/?id=13877
I didn't got what bootloader you are talking about. But if you want latest twrp then check this link
https://dl.twrp.me/condor/twrp-3.1.0-0-condor.img.html
Ankit_29 said:
Check this link for Radio file
https://forum.xda-developers.com/devdb/project/dl/?id=13877
I didn't got what bootloader you are talking about. But if you want latest twrp then check this link
https://dl.twrp.me/condor/twrp-3.1.0-0-condor.img.html
Click to expand...
Click to collapse
Thanks mate.
I will give it a go
I had the same problem with my condor ,but flashing the "radio files" didn't help the case ,it always failed in my case ,so the best advice I can give you is to not flash isolated radio files ,but to backup your data and flash stock ROM for your device,trust me it'll save you a lot of headache
Akshay_92 said:
I had the same problem with my condor ,but flashing the "radio files" didn't help the case ,it always failed in my case ,so the best advice I can give you is to not flash isolated radio files ,but to backup your data and flash stock ROM for your device,trust me it'll save you a lot of headache
Click to expand...
Click to collapse
Thanks for that info.
You say that you had the same problem? Have you sorted it out now ?
When you flashed the stock ROM
Did you have to do this via fastboot ??
Thanks again
johnhux7 said:
Thanks for that info.
You say that you had the same problem? Have you sorted it out now ?
When you flashed the stock ROM
Did you have to do this via fastboot ??
Thanks again
Click to expand...
Click to collapse
Yes,my device is good as new,I'm writing this message from it so haha...you can find the appropriate stock ROM to flash here
https://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
If you don't know which ROM to download, got to your phones settings >about phone>build number
And download the specific ROM with that build number,now be absolutely sure to not flash a KitKat ROM on a device that was upgraded to lollipop earlier, its absolutely essential as it 100% will brick your device,
As for your question, yes you will need to be in fastboot to flash the ROM,and the program that you'll need to flash the ROM with is called mfastboot-v2 you can find it here
https://forum.xda-developers.com/general/rooting-roms/using-mfastboot-exe-to-unbrick-motorola-t3203518
Now after downloading both the ROM and mfastboot ,extract both of them into the same folder of your PC ,after doing that ,go into that folder and hold shift+right mouse key and select "open new command window here" from the dialogue box ,now assuming that you have downloaded the drivers for your phone , switch off your phone ,go into mfastboot mode by holding power key + volume down key for about 5-7seconds, now connect your phone to the PC with the help of USB cable and in the command window type "mfastboot devices" if everyw is done correctly it will show your device's name in an alphanumeric format under "list of devices" after that follow these commands in the ORDER! that they are written and you will be good to go :
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
NOTE:- number of sparsechunk files may be different for your version (check the files extracted from the ROM inside the same folder to see the order of numbers) so if the numbers are like 0,1,2,3,4 flash them in that order ,I have named it 1,2,3 in the command above for illustrations, good luck if you will do this correctly, you'll be back to a facotory version of your phone,with the imei problem fixed , another thing though, you'll lose your custom recovery so after you flash this stock ROM ,you'll have to flash the custom recovery again,
Cheers!!
Akshay_92 said:
Yes,my device is good as new,I'm writing this message from it so haha...you can find the appropriate stock ROM to flash here
https://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
If you don't know which ROM to download, got to your phones settings >about phone>build number
And download the specific ROM with that build number,now be absolutely sure to not flash a KitKat ROM on a device that was upgraded to lollipop earlier, its absolutely essential as it 100% will brick your device,
As for your question, yes you will need to be in fastboot to flash the ROM,and the program that you'll need to flash the ROM with is called mfastboot-v2 you can find it here
https://forum.xda-developers.com/ge...ng-mfastboot-exe-to-unbrick-motorola-t3203518
Now after downloading both the ROM and mfastboot ,extract both of them into the same folder of your PC ,after doing that ,go into that folder and hold shift+right mouse key and select "open new command window here" from the dialogue box ,now assuming that you have downloaded the drivers for your phone , switch off your phone ,go into mfastboot mode by holding power key + volume down key for about 5-7seconds, now connect your phone to the PC with the help of USB cable and in the command window type "mfastboot devices" if everyw is done correctly it will show your device's name in an alphanumeric format under "list of devices" after that follow these commands in the ORDER! that they are written and you will be good to go :
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
NOTE:- number of sparsechunk files may be different for your version (check the files extracted from the ROM inside the same folder to see the order of numbers) so if the numbers are like 0,1,2,3,4 flash them in that order ,I have named it 1,2,3 in the command above for illustrations, good luck if you will do this correctly, you'll be back to a facotory version of your phone,with the imei problem fixed , another thing though, you'll lose your custom recovery so after you flash this stock ROM ,you'll have to flash the custom recovery again,
Cheers!!
Click to expand...
Click to collapse
Thanks so much for taking the time to write this for me.
I'm new to using fastboot I got spoiled by using ODIN with Samsung whist I was learning.
Just one question.
Do you put in each of those commands and press enter after each one ?
johnhux7 said:
Thanks so much for taking the time to write this for me.
I'm new to using fastboot I got spoiled by using ODIN with Samsung whist I was learning.
Just one question.
Do you put in each of those commands and press enter after each one ?
Click to expand...
Click to collapse
Yes!!...And wait till it returns as [OKAY],then move ahead with the next one
Sent from my Moto G (4) using Tapatalk
---------- Post added at 06:43 PM ---------- Previous post was at 06:39 PM ----------
Akshay_92 said:
Yes!!...And wait till it returns as [OKAY],then move ahead with the next one ...It's alright man,we all are new to some stuff at one point,do let me know if you come into a hiccup
Cheers!
Sent from my Moto G (4) using Tapatalk
Click to expand...
Click to collapse
Sent from my Moto G (4) using Tapatalk
Akshay_92 said:
Yes!!...And wait till it returns as [OKAY],then move ahead with the next one
Click to expand...
Click to collapse
I though so.
Was just checking.
I'm going to have some fun doing this
Love learning some thing new
The Moto is my spare phone so I can practice on that before getting stuck into fastboot on my Honor 8
johnhux7 said:
I though so.
Was just checking.
I'm going to have some fun doing this
Love learning some thing new
The Moto is my spare phone so I can practice on that before getting stuck into fastboot on my Honor 8
Click to expand...
Click to collapse
[emoji1] yep absolutely,
Sent from my Moto G (4) using Tapatalk
Akshay_92 said:
[emoji1] yep absolutely,
Click to expand...
Click to collapse
Thank you so much for sharing your knowledge.
It's what I love about this XDA community
Few days ago, imei number on my brother's moto e xt1022 disappeared out of nowhere. Phone used to boot to working state but didn't accept any sim cards nor connect to WiFi. The bootloader was locked and phone was not rooted.
So I visited official motorala service centre. They "softwared" the phone (probably flashed stock firmware). After that, the imei no was replaced with new numbers. Bootloader was unlocked automatically. The phone booted once. But after I switched off to insert sim card and then tried to boot, its not getting past this screen. What should I do to restore the phone to its working condition? Please help.
ramsut said:
Few days ago, imei number on my brother's moto e xt1022 disappeared out of nowhere. Phone used to boot to working state but didn't accept any sim cards nor connect to WiFi. The bootloader was locked and phone was not rooted.
So I visited official motorala service centre. They "softwared" the phone (probably flashed stock firmware). After that, the imei no was replaced with new numbers. Bootloader was unlocked automatically. The phone booted once. But after I switched off to insert sim card and then tried to boot, its not getting past this screen. What should I do to restore the phone to its working condition? Please help.
Click to expand...
Click to collapse
Flash stock/custom ROM
ramsut said:
Few days ago, imei number on my brother's moto e xt1022 disappeared out of nowhere. Phone used to boot to working state but didn't accept any sim cards nor connect to WiFi. The bootloader was locked and phone was not rooted.
So I visited official motorala service centre. They "softwared" the phone (probably flashed stock firmware). After that, the imei no was replaced with new numbers. Bootloader was unlocked automatically. The phone booted once. But after I switched off to insert sim card and then tried to boot, its not getting past this screen. What should I do to restore the phone to its working condition? Please help.
Click to expand...
Click to collapse
Hmm....Well this is certainly not professional and quite unfortunate,on the part of the service center employees,but since I assume that it's no longer under warranty and they won't take back the Devi because it's unlocked now and also because they won't take responsibility for it ,the best you can do is flash stock ROM,I have explained that earlier in this thread ...
Cheers!! And let me know how it went
Sent from my Moto G (4) using Tapatalk
Akshay_92 said:
Hmm....Well this is certainly not professional and quite unfortunate,on the part of the service center employees,but since I assume that it's no longer under warranty and they won't take back the Devi because it's unlocked now and also because they won't take responsibility for it ,the best you can do is flash stock ROM,I have explained that earlier in this thread ...
Cheers!! And let me know how it went
Click to expand...
Click to collapse
I got the SIM working.
Followed your instructions.
Got the phone back to stock
All good thanks for your help
John
Download the stock ROM HERE
and unzip it along with the abd fastboot archives (inside it's folder)
put your phone on fastboot mode: volume down + power
open abd + fastboot HERE (shift + right mouse button - open command window)
it will open a command window
write: fastboot devices and hit enter - make sure it shows numbers like serial numbers
past this comand:
Code:
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem lock
fastboot reboot
hit enter and wait, you are done!
PS:
1. doing this fixed "Your device has failed verification and may not work properly" showing on my brand new phone
2. it is just flashing stock room it is not rooting or unlocking boothloder so it will not make you lose your warranty
3. as for me (I'm from brazil) its working perfectly
CREDITS FOR THE ROOM: stockrom.net
Force close
I'm facing force closes from apps like file manager Moto apps and more. Did you face these?
Are you sure this is the stock rom for the XT1710-07? The stock rom you posted is exactly the same as
https://mirrors.lolinet.com/firmware/moto/albus/official/RETAIL/
But good to know that it worked for you. Who knows, maybe now there is only one RETAIL stock rom which works for all variants (except VZW and CN)?
@lexie90
1- Room = quarto, sala. The correct name is "ROM"
2- Original credits to ROM is for Adriana Pignata (Google+) and mirrors.lollinet.
This site stckrom.net simply copying.
Since the origin of this code is unknown and the OP is not a developer, members are advised to exercise due caution - in other words, you take the risk entirely.
I credited the site I got It from, How could I know where they got It from?
Junior Passos said:
@lexie90
1- Room = quarto, sala. The correct name is "ROM"
2- Original credits to ROM is for Adriana Pignata (Google+) and mirrors.lollinet.
This site stckrom.net simply copying.
Click to expand...
Click to collapse
Thanks for the Very important correction
LenAsh said:
Since the origin of this code is unknown and the OP is not a developer, members are advised to exercise due caution - in other words, you take the risk entirely.
Click to expand...
Click to collapse
Yep this note was in the post until the ADM edited and apparently took It off
If my Moto don't have unlock bootloader, I can flash it?
lexie90 said:
I credited the site I got It from, How could I know where they got It from?
Click to expand...
Click to collapse
That's exactly the point I made. Other members NEED to understand the risks this brings.
LenAsh said:
That's exactly the point I made. Other members NEED to understand the risks this brings.
Click to expand...
Click to collapse
Yep I agree! I dont understand why the ADM took the advertising out
this rom stock work with other variants of XT1710, in Mexico we have XT 1710-06, please you can tell me?
XT1710-06 Variant
Does anyone has the XT1710-06 variant? it's the Latin American Retail version.
I'm still on APRIL 1st Security Patch, and I'm really starting to wonder if this version is ever going to upgrade to 8.0 or whatever.
Is there a way to go back to full stock rom in case I mess up in the process of installing a different official rom?
Thanks!
Not exactly the best at all with phone development, and this may be the dumbest question ever, but can I flash this onto a Samsung phone somehow? I am just wondering. Like I said, sorry if it is a dumb question I am not good at all with phone stuff haha
@Junior Passos Were you able to install OTAs after installing this stock retail rom?
gngshpor said:
Not exactly the best at all with phone development, and this may be the dumbest question ever, but can I flash this onto a Samsung phone somehow? I am just wondering. Like I said, sorry if it is a dumb question I am not good at all with phone stuff haha
Click to expand...
Click to collapse
You can't put it on a samsung. You needa put that Samsung's roms on that samsung.
Hi to all. Have a question. I bought Moto z2 play xt 1710-11 with ZUI!!! where can I get working global stock rom?
Yevgeniy1985 said:
Hi to all. Have a question. I bought Moto z2 play xt 1710-11 with ZUI!!! where can I get working global stock rom?
Click to expand...
Click to collapse
Hi, nowhere.
I used 2 stock ROMs to get a clean Nougat with working modems.
KirMit said:
Hi, nowhere.
I used 2 stock ROMs to get a clean Nougat with working modems.
Click to expand...
Click to collapse
Maybe custom? Something with working gapps and Moto mods
Yevgeniy1985 said:
Maybe custom? Something with working gapps and Moto mods
Click to expand...
Click to collapse
Year, just replace with correct modem images.
KirMit said:
Year, just replace with correct modem images.
Click to expand...
Click to collapse
If it possible, could you give me a link to read materials how to do that?