So recently i was successful in rooting my device. Well i have heard of root cloak and i installed it from my xposed installer. Im currently running the Sky Dragon stock rom for 5.1.1. And even though I've installed root cloaker and activated and rebooted my device, i added the Android Pay app to the list. I then force closed or stopped the Android Pay app. So it gives me the error about it not being compatible so why or how is it still detecting my root? Is it cause the custom stock rom?
ToF_Itachi said:
So recently i was successful in rooting my device. Well i have heard of root cloak and i installed it from my xposed installer. Im currently running the Sky Dragon stock rom for 5.1.1. And even though I've installed root cloaker and activated and rebooted my device, i added the Android Pay app to the list. I then force closed or stopped the Android Pay app. So it gives me the error about it not being compatible so why or how is it still detecting my root? Is it cause the custom stock rom?
Click to expand...
Click to collapse
there's a post in p 11/12 of the CM13 thread where someone used a nexus 5x build.prop, unrooted, rebooted, added android pay, then. Re enabled root, and kept android pay functionality.
I did this too, and it worked for me. Even updated to latest nightly and kept functionality. Good luck.
Sent from my LG-VS985 using Tapatalk
Can you tell me how? I'm not quite following how that guy described it.
ToF_Itachi said:
Can you tell me how? I'm not quite following how that guy described it.
Click to expand...
Click to collapse
Do a backup/ nandroid first. I screwed up when I first did this and it was a disaster trying to fix it.
1. download his attached build.prop.
2. Backup yours.
3. Replace your build.prop with his.
4. Disable root/unroot.
5. reboot.
6. Open android pay and add your cards.
7. Re-root/enable root, and enjoy.
Sent from my LG-VS985 using Tapatalk
Does the phone has to be on CM 13 or will it work on stock root?
Hyper_Warp said:
Does the phone has to be on CM 13 or will it work on stock root?
Click to expand...
Click to collapse
if you're stock, I think you just need to disable/un root, set up android pay, then re root. Not positive though, been on cm since the day bump was released, and haven't looked back.
Sent from my LG-VS985 using Tapatalk
Well see im on a stock based rom called SkyDragon so will it work for that?
It might. Nandroid first, and please report back for anyone else who might be following this.
I have the sky Dragon rom with xsposed installed running the 5.1 or whatever their newest one is for. It didn't work
Related
For anyone that can actually download the latest version of Wallet app (I'm on T-mobile and read about walk-around and it installs but fails to do otherwise)...
Could you kindly upload the latest Wallet.apk?
Thank you!
+1
get the f*** off my obstacle course!
You mean this one?
latest version identifies unsupported device. so you might wanna think twice before doing that.
Yep.. I get insufficient privileges. This method used to work until previous version if I flash the CM9 NFC lib then copy Wallet.apk to system/app, but obviously since prepaid card no longer works, I wanted to try if the new version of Wallet.apk would work.
So I guess there's no fix unless I totally go back to pure stock or someone else comes up with the mod?
I have Nexus S on custom 4.0.4 ROM, rooted and bootloader unlocked.
droidance said:
So I guess there's no fix unless I totally go back to pure stock or someone else comes up with the mod?
I have Nexus S on custom 4.0.4 ROM, rooted and bootloader unlocked.
Click to expand...
Click to collapse
Pure stock might be an issue too. I'm getting an update popup on my wallet app, and when I attempted to use it yesterday, it didn't work. I haven't tried again, but there may be an issue there too, just a head's up.
Hi All,
Just wondering if anyone has any experience with this app (Australian Banking app) or any like it.
Basically I installed a custom 4.4.2 rom (SlimKat) and I rooted the device and use SuperSU, when I load the app it gives me a warning about my phone being modified, I tried to remove the root with SuperSU (I used to use Voodookeeper OTA when I was on stock 4.2.2 and below) but this made no difference (regardless of trying temp or the full unroot option) and I still had the message.
So does anyone know if I can actually fool the app into thinking my device isn't modified? Or is it the fact I have a custom rom and is there no way to hide that fact?? Has anyone had any experience with a similar app?
Thanks.
Install xposed framework and install and use rootcloak
Darke5tShad0w said:
Install xposed framework and install and use rootcloak
Click to expand...
Click to collapse
That worked perfectly thankyou very much.
I would have much preferred something by Chainfire or the Voodoo OTA app, seeing as they are so heavily used it would have been nice for my peace of mind, but beggers can't be choosers and the solution still gets me what I wanted, so thanks again.
No problems, glad to have helped
I am sorry to be so damn noobish but i need help lol... Ive watched so many youtube videos with josh dew and read so many posts and downloaded so many roms. I know I am probably missing just one step and if someone can help me I would be so appreciative.
my note 3 is rooted with twrp installed. i want to change my rom , my main goal is to get unlimited hotspot unlocked.... when i try to install a rom it says KERNEL is not SEANDROID ENFORCING, I then put it all back to stock then root then install twrp.
I think i have maybe a wrong kernel? What do I need to do?
TheWreckHER said:
I am sorry to be so damn noobish but i need help lol... Ive watched so many youtube videos with josh dew and read so many posts and downloaded so many roms. I know I am probably missing just one step and if someone can help me I would be so appreciative.
my note 3 is rooted with twrp installed. i want to change my rom , my main goal is to get unlimited hotspot unlocked.... when i try to install a rom it says KERNEL is not SEANDROID ENFORCING, I then put it all back to stock then root then install twrp.
I think i have maybe a wrong kernel? What do I need to do?
Click to expand...
Click to collapse
There is nothing wrong. It says that only if you are not using a pure stock kernel.
Sent from my SM-N900P using Tapatalk
JonSCSL said:
There is nothing wrong. It says that only if you are not using a pure stock kernel.
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
But it just reboots constantly never starts up
TheWreckHER said:
But it just reboots constantly never starts up
Click to expand...
Click to collapse
I need a little more information from your phone in order to accurately help you.
What version of stock TW were you running when you rooted (prior to flashing a ROM)?
Based on what you're describing, you most-likely were on Jellybean (MJ4) when you did your rooting and installed TWRP.
What is your bootloader version?
You can see this on the same boot-up screen where you see the "KERNEL is not SEANDROID ENFORCING" message.
What is your TWRP version?
Some ROMs need the newest version of TWRP in order to install correctly. For our phone, older versions of TWRP (2.6.X.X) can only be used to install Jellybean (MJ4) Roms, while the newer versions of TWRP (2.7.X.X) can only install KitKat (NAB, NC5) Roms.
What ROMs have you been trying to flash?
This will help us understand if there are issues with what you're installing.
The main reason I ask these questions is that there is a very specific way of upgrading from Jellybean (MJ4) to KitKat (NAB, NC5) on our phones. Most people (like myself) rooted on other phones and aren't used to the bootloader restrictions Samsung introduced on the Note 3, so we expect to just upgrade from MJ4 to NC5 like it's no big deal.
Also, there's the issue with TWRP... because of the whole bootloader thing, one version of TWRP cannot work for both JB and KK Roms. It's just the way it is... We've helped plenty of people who were trying to flash KK Roms on an older version of TWRP, only to have errors and bootloops.
Hope this helps!
Check out "WiFi Tether Router"
https://play.google.com/store/apps/details?id=net.snclab.wifitetherrouter This works, for me, on stock rooted nc5. It's a paid app. Follow the settings directions in the description to get all the settings right for your phone. It works and isn't difficult to set up. I have nc5 stock rooted. Custom recovery isn't needed for this. You must have root for it to work.
A reboot after using is a good idea. Otherwise, no complaints. Works on 4g.
Tethering eats battery life and creates heat. If you plan to use it for awhile, I suggest plugging in a charger. Keep the phone out in the open so it can keep cool and get good signal. Charging and tethering with create heat. Nothing to worry about if you don't put the phone in a hot place while using it.
i tried to use the safestrap method and bricked my phone but samsmobile and odin saved my life again, but I know I can root the ota, but what really can we do with it? is it possible it install xposed or can we do anything with it other then getting rom toolbox??? im just curious and I don't want to go exploring and do more damage I was lucky I saved my phone this time.......
Hello again!
i flashed xposed successfully on stang5litre's oc1 5.0.1 lollipop rom. I don't know about stock though, i believe your rom has to be deodexed. :good:
Well now I got my phone working there is no way I can down grade or get a recovery and flash roms or get a dexoted rom or anything. ?? I only went back to Android from apple for the roms. Time for an upgrade already
lucask1018 said:
Well now I got my phone working there is no way I can down grade or get a recovery and flash roms or get a dexoted rom or anything. ���� I only went back to Android from apple for the roms. Time for an upgrade already
Click to expand...
Click to collapse
To install stang5litre's rom you don't have to downgrade anything or install a custom recovery. All you have to do is install the app called FlashFire. google how to do it or on xda
Matthew M. said:
To install stang5litre's rom you don't have to downgrade anything or install a custom recovery. All you have to do is install the app called FlashFire. google how to do it or on xda
Click to expand...
Click to collapse
Can u give me a link for the flash fire app
Doesn't matter I can't get my phone to root again
lucask1018 said:
Doesn't matter I can't get my phone to root again
Click to expand...
Click to collapse
Are you using kingroot 4.1 ?
Matthew M. said:
Are you using kingroot 4.1 ?
Click to expand...
Click to collapse
Yea I am keeps failing. I restarted my phome and uninstalled and reinstalled and tryed again nothing.
Hi,
Kingroot dosent want you to root your phone uninstall kingroot, and use supersu
They are wanting to keep their
Super in control. They maynot
Allow you to use their app to reinstall. Not sure how they know but they will not allow me to use their apps.. they fail
To root on all three apps. . Ps they asked me to email them my error logs on the desk top version and they told me they cant root my phone for now . They will email me when it works...??????...
Sent from my SCH-I545 using XDA Free mobile app
Hey all, I've been having a lot of fun playing pokemon go but recently the newest version of the game has blocked users who have rooted phones, there's a hack called magisk that will allow the root to be toggled off while the game is being played and then back on when it is not. I am having no luck installing it though.
Has anyone else tried and succeeded to run this mod?
I'm running OL1 (5.1.1), stock rom.
Thanks!
iviyth0s said:
Hey all, I've been having a lot of fun playing pokemon go but recently the newest version of the game has blocked users who have rooted phones, there's a hack called magisk that will allow the root to be toggled off while the game is being played and then back on when it is not. I am having no luck installing it though.
Has anyone else tried and succeeded to run this mod?
I'm running OL1 (5.1.1), stock rom.
Thanks!
Click to expand...
Click to collapse
I'm running it now. Although I've read that it can be done without doing a full Factory Reset, per the instructions, I wasn't able to make it work. There's a tutorial from Android Police that explains everything and provides links to the various files needed. Google search "magisk Pokemon go". You'll see the link. It's not too complicated of a process but make sure you have everything backed up.
Sent from my klte using Tapatalk
iviyth0s said:
Hey all, I've been having a lot of fun playing pokemon go but recently the newest version of the game has blocked users who have rooted phones, there's a hack called magisk that will allow the root to be toggled off while the game is being played and then back on when it is not. I am having no luck installing it though.
Has anyone else tried and succeeded to run this mod?
I'm running OL1 (5.1.1), stock rom.
Thanks!
Click to expand...
Click to collapse
I also have had no luck installing it. I have a sm-g900h on marshallow 6.0.1 and I've tried 5 times on doing it, but it still won't work. I've looked for a week for different drivers and archives to do it but I can't find any that work.
I'd really like help because I'm a total newbie in this and I don't know what to do or if I'm doing something wrong.
Darkness30XX said:
I'm running it now. Although I've read that it can be done without doing a full Factory Reset, per the instructions, I wasn't able to make it work. There's a tutorial from Android Police that explains everything and provides links to the various files needed. Google search "magisk Pokemon go". You'll see the link. It's not too complicated of a process but make sure you have everything backed up.
Sent from my klte using Tapatalk
Click to expand...
Click to collapse
I don't know what I'm doing wrong because all that sounded pretty much like everything else. I've tried nearly every combination of flashing files, unrooting, leaving root. When I unroot I cannot boot to the OS, I was able to play the newer version when I unrooted but I don't think I'm going to do that. Guess I'll just play the old one as long as I can before the force the update and then maybe stop playing :-/
Rodmare95 said:
I also have had no luck installing it. I have a sm-g900h on marshallow 6.0.1 and I've tried 5 times on doing it, but it still won't work. I've looked for a week for different drivers and archives to do it but I can't find any that work.
I'd really like help because I'm a total newbie in this and I don't know what to do or if I'm doing something wrong.
Click to expand...
Click to collapse
Yeah, I considered upgrading to Marshmallow because I've seen videos of it working for an S7 edge running Marshmallow and thought that Magisk may have had better support with 6.0. I really hope I don't need to get an S7 to get the game to work while rooted...The S5 is still a much better featured phone IMHO and I'm going to use it until it doesn't work anymore because it's so rock solid.
I already solved the problem I had installing it.
Turns out I was replacing the compatible version of super su that comes in the .zip without noticing.
It was all because I didn't read the instructions provided and let TWRP install the super su before rebooting.
I just didn't let TRWP install super su and it worked like a charm.
Rodmare95 said:
I already solved the problem I had installing it.
Turns out I was replacing the compatible version of super su that comes in the .zip without noticing.
It was all because I didn't read the instructions provided and let TWRP install the super su before rebooting.
I just didn't let TRWP install super su and it worked like a charm.
Click to expand...
Click to collapse
And this is on Marshmallow or Lollipop? I'm going to try updating to MM and then trying the magisk stuff again, maybe that's the key.
iviyth0s said:
And this is on Marshmallow or Lollipop? I'm going to try updating to MM and then trying the magisk stuff again, maybe that's the key.
Click to expand...
Click to collapse
I have MM installed if that helps
Rodmare95 said:
I have MM installed if that helps
Click to expand...
Click to collapse
That did it, juat upgraded to PG2 and now magisk works great
Thanks!
iviyth0s said:
That did it, juat upgraded to PG2 and now magisk works great
Thanks!
Click to expand...
Click to collapse
Malbert says he'll cook magisk into the next version of his Area 51 MM Rom.
Rodmare95 said:
I have MM installed if that helps
Click to expand...
Click to collapse
hey bro , i am S5 (SM-G900H) user too and i want to ask how to install and download ? or source about it