[6.0.1_r22] [UBL] [FULL_F2FS] Temasek Unofficial Build
Temasek Unofficial Build for Xperia SP (CM 13)
Disclaimer :
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Brief Introduction
This is the official maintainer thread for all current and future unofficial builds of CM13; source-worked by @temasek, built to Xperia SP C530X by @boylush.
Credits to :
Team Revolution (@Furrydaus, @whitemamba, @AndroidNoob69
AdrianDC
Mrcl1450
Dark_Passenger
Code Aurora Forum
Temasek's Unofficial Build (@arter97, @temasek)
XDA-Developers
CyanogenMod
*If we have left someone or something out, please accept our apologies*
XDA:DevDB Information
[6.0.1_r22] [UBL] [FULL_F2FS] Temasek Unofficial Build , ROM for the Sony Xperia SP
Contributors
boylush
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2015-12-04
Last Updated 2016-03-23
Reserved
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation Instructions
Coming from another ROM/Want to reinstall Temasek?/Having different OS of Temasek?
1. Wipe/Factory Reset using TWRP
2. Flash Kernel in packaged zip using FlashTool
3. Boot to Recovery using 'down' key
4. Press 'Apply Update' then press the location that you stored the file, then press the zip
5. Flashing ROM... (Might appear that it is hanged but it isn't)
6. Flash SuperSU (ONLY FLASH GAPPS AFTER REBOOT)
7. Boot to OS
8. Reboot to Recovery
9. Flash Gapps and whatever stuff u want
10. Startup and have fun
Coming from an earlier release of Temasek (Same Android Version) and want to upgrade?
1. Boot to Recovery using 'down' button
2. Press 'Apply Update' then press the location that you stored the file, then press the zip
3. Flashing ROM... (Might appear that it is hanged but it isn't)
4. Flash SuperSU (GAPPS no need to reflash)
5. Boot to OS and have fun
Converting from ext4 filesystem to f2fs?
1. Boot to CyanogenMod Recovery using 'down' button
2. Flash TWRP FOTA zip given below
3. Reboot into TWRP Recovery
4. Go to Wipe, Select 'Cache', Change File System, F2FS. Then, do the same for 'Data' and 'System'
5. Wipe all (Advanced Wipe > Tick 'Dalvik Cache', 'System', 'Cache', 'Data' and 'Internal Storage'
6. Flash Temasek as above
7. Boot to OS and have fun
Getting rid of TWRP FOTA
1. Grab Stock FOTA
2. Flash Stock FOTA via FlashTool on PC
3. TWRP Removed!
Features
What is QuickBoot?
Enabling QuickBoot: (CURRENTLY UNAVAILABLE)
1. Settings
2. Developer Settings
3. QuickBoot
4. I'm not responsible for any data loss due to this feature.
Downloads
20160323 Download
TWRP Recovery : HERE
SuperSU (If you want ROOT for your ROM) : HERE (I don't officially support root yet)
GAPPS : HERE http://opengapps.org/?api=6.0&variant=micro
Kernel Source : GITHUB
Changelogs
Changelogs
Code:
Temasek V5.4 (Internal M_0500)
Build Date : 20160323
- Android 6.0.1_R22
- Temasek v5.4
- F2FS (Data/Cache) [System F2FS will be fixed in next release]
- Security Patch: 20160301
- Camera works, capture doesn't
- Version Bump
For non-exhaustive changelog, check 'cm_huashan-Changelog.txt' under download link.
[URL="https://www.androidfilehost.com/?w=files&flid=52648"]Download[/URL]
Temasek V1.2 (Internal M_01201)
Build Date : 20151203
- Android 6.0.0_R26
- Temasek v1.2
- F2FS (Data/Cache) [System F2FS will be fixed in next release]
- Security Patch: 20151101
- Camera bugged
- Manual Step: REMOVE 'libsony_cam.so' USING TWRP FILE MANAGER FROM 'system/lib/libsony_cam.so'
- Initial CM13 temasek release
For non-exhaustive changelog, check 'cm_huashan-Changelog.txt' under download link.
[URL="https://onedrive.live.com/redir?resid=CCA9FA45EB40E019!12983&authkey=!APzI0YtGPiqjyLM&ithint=folder%2celf"]Download[/URL]
================== All builds will be untested, please report back if there is any bugs. Thank you. ==================
[/FONT]
If download link is broken, please PM me if you require an older version.
Phone Lagging? If these apps are installed, its out of my control.
- Any App by 'Facebook'
- Any RAM 'Improvement' Apps other than 'Greenify'
- Any Battery Saver App
- Any System UI flashed over (custom Xperia) (Note: Flashed over, not installed apk themes)
- Any Modification (Audio, Appearance or whatever)
Phone does not boot?
If you have flashed any other modification such as Xposed, Custom Kernel or any other mods that is not mentioned above, no support will be given.
20151204
Temasek V1.2 (Internal M_01201)
Build Date : 20151203
- Android 6.0.0_R26
- Temasek v1.2
- F2FS (Data/Cache) [System F2FS will be fixed in next release]
- Security Patch: 20151101
- Camera bugged
- Manual Step: REMOVE 'libsony_cam.so' USING TWRP FILE MANAGER FROM 'system/lib/libsony_cam.so'
- Initial CM13 temasek release
For non-exhaustive changelog, check 'cm_huashan-Changelog.txt' under download link.
Download
Holy %&$^! Thanks for this new Rom!
thanks bro. whats working? anyone have tested this rom?
So is camera working or not?
DahakePL said:
So is camera working or not?
Click to expand...
Click to collapse
thats my question i´ll try it on weekend
Champ is back...'ll try soon
I have try to boot it three times, always clean install, with and without gapps and always stuck in final "initiating system". (Optimization apps works). I have wait 10 min, then reboot with off back bottom but...no luck. Now is in temasek's boot animation screen til the end of times.
Maybe tomorrow I'll try again.
Alvichone said:
I have try to boot it three times, always clean install, with and without gapps and always stuck in final "initiating system". (Optimization apps works). I have wait 10 min, then reboot with off back bottom but...no luck. Now is in temasek's boot animation screen til the end of times.
Maybe tomorrow I'll try again.
Click to expand...
Click to collapse
Camera bugged
- Manual Step: REMOVE 'libsony_cam.so' USING TWRP FILE MANAGER FROM 'system/lib/libsony_cam.so'
Click to expand...
Click to collapse
do as said in OP, room is really smooth
Alvichone said:
I have try to boot it three times, always clean install, with and without gapps and always stuck in final "initiating system". (Optimization apps works). I have wait 10 min, then reboot with off back bottom but...no luck. Now is in temasek's boot animation screen til the end of times.
Maybe tomorrow I'll try again.
Click to expand...
Click to collapse
hi post this in where you have the suricato profile pic
Krawzer said:
do as said in OP, room is really smooth
Click to expand...
Click to collapse
I couldn't find the file, it was nowhere to be seen
Thanks, guys. I didn't read well. Tomorrow I try again.
DahakePL said:
I couldn't find the file, it was nowhere to be seen
Click to expand...
Click to collapse
look for a mount option on TWRP, I think its in the advanced menu, and check "system", the filles will appear
Krawzer said:
look for a mount option on TWRP, I think its in the advanced menu, and check "system", the filles will appear
Click to expand...
Click to collapse
Ahh, that's why it didn't appear
guvey said:
hi post this in where you have the suricato profile pic
Click to expand...
Click to collapse
Google images. Monkey titi, something like that
What's the bugs in this rom? Can I use it daily? Is camera/wifi/mobile network working?
for all the people whose asking ...this ROM is based on our cm13 sources by adrian and m.1450 so yes the camera doesn't work and all the bugs in cm13 should be presented here
flash- said:
for all the people whose asking ...this ROM is based on our cm13 sources by adrian and m.1450 so yes the camera doesn't work and all the bugs in cm13 should be presented here
Click to expand...
Click to collapse
Thanks for the clarification, i will rebuild with fully working ROM once it is available at the earliest opportunity. Thanks!
Related
Temasek Unofficial Build for Xperia SP
UNDER ALPHA TESTING! MAY NOT BOOT.
Disclaimer :
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Brief Introduction
This is the official maintainer thread for all current and future unofficial builds of CM12.1; source-worked by @temasek, built to Xperia SP C530X by @boylush. Please report any bugs or issues that you see using the DevDB Bug reporting system above; Thank you.
Credits to :
Team Revolution (@Furrydaus, @whitemamba, @AndroidNoob69)
Code Aurora Forum
Temasek's Unofficial Build ( @arter97, @temasek)
XDA-Developers
CyanogenMod
Sony Developer World for AOSP Source-Code
@jefferyvh
@MK99
*If we have left someone or some team out, please accept our apologies*
XDA:DevDB Information
[5.1.1_r26] [UBL] Temasek's Unofficial Build, ROM for the Sony Xperia M4 Aqua
Contributors
boylush, boylush, temasek, arter97
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2015-11-12
Last Updated 2015-11-12
Reserved
Screenshots
Screenshots at 240dpi with some in-ROM customization. Default DPI is 320. (on Xperia SP)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation Instructions
Coming from another ROM/Want to reinstall Temasek?
1. Wipe/Factory Reset using TWRP
2. Flash Kernel in packaged zip using FlashTool
3. Boot to Recovery using 'down' key
4. Press 'Apply Update' then press the location that you stored the file, then press the zip
5. Flashing ROM... (Might appear that it is hanged but it isn't)
6. Flash SuperSU (ONLY FLASH GAPPS AFTER REBOOT)
7. Boot to OS
8. Reboot to Recovery
9. Flash Gapps and whatever stuff u want
10. Startup and have fun
Coming from an earlier release of Temasek and want to upgrade?
1. Boot to Recovery using 'down' button
2. Press 'Apply Update' then press the location that you stored the file, then press the zip
3. Flashing ROM... (Might appear that it is hanged but it isn't)
4. Flash SuperSU (GAPPS no need to reflash)
5. Boot to OS and have fun
Downloads
ROM: Download BELOW
TWRP Recovery (Flash once via CyanogenMod Recovery, it will stay there in FOTA partition until u flash stock FTF) : HERE
SuperSU (If you want ROOT for your ROM) : HERE
GAPPS : HERE (ONLY USE THIS)https://github.com/cgapps/vendor_google/tree/builds/arm64
Kernel Source : GITHUB (Patches in patches.md in Device Source)
Device Source : GITHUB
Reserved
Changelogs
Code:
Temasek V18.5 (Internal v18505)
Build Date : 20151113
- Android 5.1.1_R26
- Temasek v18.5
- Security Patch: 20151101
- Various Fixes
- Check DISCLAIMER_TEST.WARN below before flashing
For non-exhaustive changelog, check 'cm_tulip-Changelog.txt' under download link.
[URL="https://onedrive.live.com/redir?resid=CCA9FA45EB40E019!12586&authkey=!ABxApMqfguM47E8&ithint=folder%2cmd5sum"]Download[/URL]
Temasek V18.5 (Internal v18501)
Build Date : 20151112
- Android 5.1.1_R26
- Temasek v18.5
- Security Patch: 20151101
- First Build
- Check DISCLAIMER_TEST.WARN below before flashing
For non-exhaustive changelog, check 'cm_tulip-Changelog.txt' under download link.
[URL="https://onedrive.live.com/redir?resid=CCA9FA45EB40E019!8899&authkey=!ALFPNlM6yx5dtnU&ithint=folder%2cmd5sum"]Download[/URL]
[/FONT]
If download link is broken, please PM me if you require an older version.
Phone does not boot?
If you have flashed any other modification such as Xposed, Custom Kernel or any other mods that is not mentioned above, no support will be given.
DISCLAIMER_TEST.WARN
Code:
This ROM is currently under testing. By downloading the ROM and testing, you agree to abide by the following:
1. Be patient, this is the first device I am bringing-up and i don't know a lot of things.
2. I have never tested anything as i just got my phone, so I haven't unlocked it. If theres anything wrong, tag me @boylush on your post and supply me the bug information as well as logfiles if possible.
3. I do not have any responsibility for your broken phone, so test at your own risk.
4. You can choose not to take part in this bringup, but if it takes a long time if i don't have the logs, don't think of ever having custom ROMs working on M4
5. Please attach logs, read below to find out how to take logs from your phone, paste it onto a CODE box or onto other services like Github gist and send a link here.
6. Have fun.
Obtaining logs
Using the PHONE:
1. open a terminal on your phone
2. run the following commands:
- su
- cat /proc/kmsg > /sdcard/kmsg.txt
- cat/proc/last_kmsg > /sdcard/last_kmsg.txt
3. the log will be stored in sdcard, kmsg.txt and last_kmsg.txt
Using a PC:
LINUX:
1. Run Command (plug ur phone into the comp in recovery or something)
- adb cat "/proc/kmsg" > kmsg.txt
- adb cat "/proc/last_kmsg" > last_kmsg.txt
Send me both logs
WINDOWS :
1. Navigate to FlashTool/x10flasher_lib directory
2. Open a Command Prompt
3. Run Command (plug ur phone into the comp in recovery or something)
- adb cat "/proc/kmsg" > kmsg.txt
- adb cat "/proc/last_kmsg" > last_kmsg.txt
Send me both logs
Thank you!
SP? Or M4 aqua?
MK99 said:
SP? Or M4 aqua?
Click to expand...
Click to collapse
M4, I might got some data wrong cos i copied it from SP thread, can u try flashing using CM Recovery, i heard it doesnt work with TWRP for now, will fix it soon
[UPDATE] OTA flashing should be fixed, download from the same link. Thanks!
Yes, can't install via TWRP.
Installed via cyanogen recovery, but it doesn't boot. Only sony xperia -text.
E: There is not recovery on your boot.img
MK99 said:
Yes, can't install via TWRP.
Installed via cyanogen recovery, but it doesn't boot. Only sony xperia -text.
E: There is not recovery on your boot.img
Click to expand...
Click to collapse
Can u send me a logfile of the boot, there's instructions on the third post. I will be fixing recovery build and elf build soon.
boylush said:
Can u send me a logfile of the boot, there's instructions on the third post. I will be fixing recovery build and elf build soon.
Click to expand...
Click to collapse
Just tell me how can I get loc from softbrick phone?
MK99 said:
Just tell me how can I get loc from softbrick phone?
Click to expand...
Click to collapse
Bootup, press reset button, boot to recovery and then use adb
boylush said:
Bootup, press reset button, boot to recovery and then use adb
Click to expand...
Click to collapse
"Access denied"
Continue later, no time to this now....
MK99 said:
"Access denied"
Continue later, no time to this now....
Click to expand...
Click to collapse
Will patch adb when i have time, i figured out why already. Gonna be doing hacks to allows adb access, thanks for testing.
If u want to be my tester can u please pm me, i'll let u know the details. Thanks!
Good work! I will try this when I get home.
LFSPovo said:
Good work! I will try this when I get home.
Click to expand...
Click to collapse
Currently not booting, if u want to join the beta team, join at https://telegram.me/joinchat/AY34mwK08MTZJizBiHd0Sw
The kernel of AOSP 5.1.1 not work?
alby_var said:
The kernel of AOSP 5.1.1 not work?
Click to expand...
Click to collapse
No it doesn't.
E: Because of this: ????
Code:
C:\Flashtool\x10flasher_lib>adb pull /system
pull: building file list...
0 files pulled. 0 files skipped.
The rom not boots ?
MK99 said:
No it doesn't.
Click to expand...
Click to collapse
Want you try if my compiled boot.img work? I compiled it with 5.1.1_r18 source code. But maybe work...
Download Here: http://www.mediafire.com/download/rzuagahhmxz7gjm/boot.img
alby_var said:
Want you try if my compiled boot.img work? I compiled it with 5.1.1_r18 source code. But maybe work...
Download Here: http://www.mediafire.com/download/rzuagahhmxz7gjm/boot.img
Click to expand...
Click to collapse
Thank you, but I need to do some school stuff. I'll try that tomorrow.
MK99 said:
Thank you, but I need to do some school stuff. I'll try that tomorrow.
Click to expand...
Click to collapse
:good:
20151113
Temasek V18.5 (Internal v18505)
Build Date : 20151113
- Android 5.1.1_R26
- Temasek v18.5
- Security Patch: 20151101
- Various Fixes
- Check DISCLAIMER_TEST.WARN below before flashing
For non-exhaustive changelog, check 'cm_tulip-Changelog.txt' under download link.
Download
Please do me a favour and pull logs via adb and post here if it doesn't boot, i've force enable adb on mtp so it will be possible for u to pull logs in TWRP
Code:
*** Disclamer
[COLOR="red"]I am not responsible for bricking your device![/COLOR] And, It is ONLY FOR NEXUS6.
Please ask a bug/Function on this post-reply. I will trying to add/Fix bugs.
AND PLEASE USE OPENGAPPS FOR THIS ROM!!!!
Introduction
This rom is based on CyanogenMod 13.0, Modified by KangDroid.(Which is my Nickname.) I added some function based on CyanogenMod.
Click to expand...
Click to collapse
Screen Shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How do I install?
You have to sure that it is for ONLY FOR NEXUS6(Shamu) and you have to install one of these recovery:CWM/TWRP/Philz/etc...
Install from OTHER ROM
* Boot in to Recovery mode
* Backup if needed.
* Wipe system/data/Cache (Factory reset is also welcome!)
* Choose ROM which I attached.
* Install with Gapps
* Boot, finish!
Install from THIS ROM(Version update)
* Boot in to Recovery mode
* Backup if needed.
* Wipe Dalvik-cache, Cache(U can do Factory reset if you want)
* Flash ROM & Gapps
* Boot, Finish!
Click to expand...
Click to collapse
Download
NOTICE: All New versions could found in:
This Page. Or check latest thread. I will update Link if there is any update.
Functions in this ROM
* Configurable SuperUser Indicator
* Long press back to kill configuration
* Configurable Color in battery saver mode
* Configurable Memorybar on Recents screen
* Advanced StatusBar Date & Clock settings (Color, Font, location.)
* KDPNavBarTweaks(CM's and DPI, Color, SlimDim, PIE)
* Time Context Header
* Full Recents Configuration(AOSP's and Slim's, Omni's)
* StatusBar Network traffic indicator
* BatteryBar
* Carrier label
* Lockscreen blur(See-Through as well)
* Configurable Lockscreen Wallpaper
* Lockscreen Weater
* Gesture Anywhere
* Slim's Lockscreen Shortcut
* App Sidebar/Circlebar
* Toast, ListView Animation
* AOKP's SystemAnimation
* Slim's IME
* Configurable VolumeSteps
* Slim Doze option
* And more and more...
Credits
Code:
* CyanogenMod --> https://github.com/CyanogenMod
* Liquid Smooth --> https://github.com/LiquidSmooth
* PAC-man --> https://github.com/PAC-man
* CrDroid Android --> https://github.com/crdroidandroid
* Faux (kernel) --> https://github.com/faux123
* ResurrectionRemix --> https://github.com/ResurrectionRemix
* CandyRoms --> https://github.com/CandyRoms
* Slim Roms --> https://github.com/SlimRoms
* TemaSek --> https://github.com/temasek
* arter97 --> https://github.com/arter97
Thanks to these People/Teams and missing people too!
XDA:DevDB Information
KangDroid-Project, ROM for the Nexus 6
Contributors
Jason Hyunwoo
Source Code: https://github.com/KangDroidAOSP
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: Stable - 1
Created 2016-01-31
Last Updated 2016-02-10
ChangeLog
Initial Release of KDP. Functions are on main thread.
Download
Direct Link to ROM File.
MD5SUM= f9d0170ba467ad65b3fb98c35a1fd058
Welcome and thanks!
Nice!
Gotta try this thx man
Welcome back!!
Jason Hyunwoo said:
ChangeLog
Initial Release of KDP. Functions are on main thread.
Download
Direct Link to ROM File.
MD5SUM= f9d0170ba467ad65b3fb98c35a1fd058
Click to expand...
Click to collapse
Bootloop
Clean flash ROM plus banks gapps, ended in boot loop, tried to reflash with skydragon kernel, rebooted reoptimsed apps again automatically then looped again.
Any ideas??
razrlover said:
Bootloop
Clean flash ROM plus banks gapps, ended in boot loop, tried to reflash with skydragon kernel, rebooted reoptimsed apps again automatically then looped again.
Any ideas??
Click to expand...
Click to collapse
Sounds like a gapps issues. I usually use the solo project gapps
Sent from my Nexus 6 using Tapatalk
cant do screenshot get error no room or no permission please help
Welcome back yay
Edit: rom is bootlooping for me
I'm getting bootloop also. Flashed it 3 different times with 3 different gapps. Really looking forward to this rom too
jbalan said:
I'm getting bootloop also. Flashed it 3 different times with 3 different gapps. Really looking forward to this rom too
Click to expand...
Click to collapse
Bootloop is not from Gapps but from conflict of SuperSU (system vs systemless). Try flashing UPDATE-UnSu.zip and then SuperSu 2.67 zip and reboot. :good:
Thank you I'm giving it go now.
HueyT said:
Bootloop is not from Gapps but from conflict of SuperSU (system vs systemless). Try flashing UPDATE-UnSu.zip and then SuperSu 2.67 zip and reboot. :good:
Click to expand...
Click to collapse
I'm getting a bootloop as well. I used the zip to unistall supersu and tried two other version and it still bootloops. Really looking forward to trying this rom.
Come on OP, rooting for the come back!! Definitely not a gapps issue, Obviously not a unsu su 2.67 issue.
Can the Wooster chime in and tell us?
razrlover said:
Come on OP, rooting for the come back!! Definitely not a gapps issue, Obviously not a unsu su 2.67 issue.
Can the Wooster chime in and tell us?
Click to expand...
Click to collapse
Try Hellscore b14 kernel as I booted up fine with that, open gapps pico, and SuperSU 2.52
@jbalan @cz829x18 @Jiggs82 @razrlover
Actually Some people is getting boot loop but I don't know why..
I released this rom in my country as well, but some users saying that "there is a boot loop". I am not sure why, but I am not getting that error. I use Opengapps PICO(Minimal version) and I don't have any problem with it.
Maybe could you try Opengapps?. If you get boot loop even you flashed OpenGapps, could you give me a logcat for it?.
Just connect your device when boot loop occurred and logcat. ADB should detect device when rom having a boot loop.
I am currently using Hydra kernel, but before that(CM Default kernel) it was working well, and I am using TWRP Multirom.
Awesome, new development is always a good thing...
tApPeD fROM mY neXuS 6
Jason Hyunwoo said:
@jbalan @cz829x18 @Jiggs82 @razrlover
Actually Some people is getting boot loop but I don't know why..
I released this rom in my country as well, but some users saying that "there is a boot loop". I am not sure why, but I am not getting that error. I use Opengapps PICO(Minimal version) and I don't have any problem with it.
Maybe could you try Opengapps?. If you get boot loop even you flashed OpenGapps, could you give me a logcat for it?.
Just connect your device when boot loop occurred and logcat. ADB should detect device when rom having a boot loop.
I am currently using Hydra kernel, but before that(CM Default kernel) it was working well, and I am using TWRP Multirom.
Click to expand...
Click to collapse
Yeah open gapps worked for me great rom man keep it up!
HueyT said:
Bootloop is not from Gapps but from conflict of SuperSU (system vs systemless). Try flashing UPDATE-UnSu.zip and then SuperSu 2.67 zip and reboot. :good:
Click to expand...
Click to collapse
By the way, I just want to know that why do you disable root permission and Flash SuerSU again? (Just curious)
CyanogenMod already have Root binary!(And it is included in AppOPS / frameworks as well!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's working:
RIL
Camera
Torch
Mobile Data
Microphone
Audio
GPS
Vibration
SD Card
Airplane Mode
LEDs
WiFi
Auto Rotation
Tethering
TWRP touch recovery
OMX
Bluetooth
Sensors
Not working:
A2DP
FM radio
Download links:
ROM
Android File Host | XDA
GApps
Open GApps
CyanogenMod Google Apps
Installation instructions:
Download ROM zip and GApps zip.
Extract boot.img from the zip and flash it via fastboot.
Boot into recovery.
Wipe System, Data, Cache, Dalvik Cache.
Flash ROM zip and GApps zip.
Reboot to system.
Migrate filesystem to F2FS
Follow these steps to migrate /data and /cache to f2fs without data lost (you need of course a valid backup).
Convert /data to F2FS :
Reboot into TWRP
Backup the Data
Go to Wipe/Advanced Wipe
Select "Data"
Select "Repair or Change File System"
Select "Change File System"
Select "F2FS" (Swipe to change will format the filesystem.)
Convert /cache to F2FS :
Go to Wipe/Advanced Wipe
Select "Cache"
Select "Repair or Change File System"
Select "Change File System"
Select "F2FS" (Swipe to change will format the filesystem.)
Restore /data :
Go to Settings
Select "Use rm -rf instead of formatting"
Go to "Restore"
Select Data backup you have done before
Swipe to restore
When the restore is done, go to Settings and uncheck "Use rm -rf instead of formatting"
Thanks to:
CyanogenMod Team
FreeXperia Project Team
munjeni and 95A31 for their awesome work on our phones and for fixing bugs, thank you
Agontuk, HandyMenny and AOSX Team
Meticulus for his work with OMX
XperiaSTE Team
XDA:DevDB Information
[ROM][UB][4.4.4] CyanogenMod 11.0, ROM for the Sony Xperia Go
Contributors
HardLight
Source Code: https://github.com/XperiaGo
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Unlocked Bootloader
Based On: CyanogenMod
Version Information
Status: Stable
Created 2016-10-06
Last Updated 2016-12-14
Changelog
Code:
[B]20161214[/B]
- Android Security Patch Level: November 1, 2016
- BlueZ 5.43
- CVE-2016-5195 patched
- CyanogenMod source updated
- TWRP source updated
[B]20161004[/B]
- CyanogenMod source updated
- Kernel source from cm-12.1 branch
- Android Security Patch Level: August 1, 2016
- F2FS support on /data and /cache
- CM Power HAL
- Tuned CM Performance Profiles
- Tuned KSM parameters
- RIL source updates
- VPN working
- Enabled lz4 compression algorithm for zRAM
- Odex ROM
- Cleanup device tree
- Cleanup init files
- BlueZ 5.42
- TWRP 3.0.2-0
- Disabled Atlas service
- Forced HighEndGfx mode
- Improved automatic brightness levels
- Enabled Eject SDcard option
- UI tweaks
- Backports from cm-12.1 branch
- Probably more things ...
[/SIZE]
Shortly testing this afternoon, stability and smoothness seems great and same battery life that original final ste version.
Update: No more random force close, no more random not working back key to exit from app menu, stability is rock solid.
10x Greatest thanks Hardlight, good work.
So glad you're back with CM11! I've Installed this ROM yesterday, so far everything is great!
any update?
Why? Theres nothing to get, rom is in final stage.
CM11.0
20161214 build uploaded!
Changelog:
- Android Security Patch Level: November 1, 2016
- BlueZ 5.43
- CVE-2016-5195 patched
- CyanogenMod source updated
- TWRP source updated
Click to expand...
Click to collapse
Download
Android File Host | XDA
Hey,
I can't install xposed, even tried the 2.6 smth version by SolarWarez which worked prior to the update, but now it's stuck at bootloop, fresh installed and everything done by the book.
Sorry, got nothing to do with you, it's the security patch, everything running great!
mod
hey man , nice work .
would you mind telling me how i can add some of sony's original kk featuers to this rom ?? :angel: like small apps and UI , and sony's app like wallkman ...
and how can i swap my sd-card with internal in this rom ??
tnx:good:
gapps force close
hi again , i'm using this rom for a day and it's great , espesially when you tweek the thing a little !
but i founded a problem which is force closeing error on every gapps ! how should i fix it ??:crying:
Sorry to say that 20161214 version that I flashed at december (dalvik and cache wiped) goes to my mobile in two sporadic problems: some random reset and some force closed, nothing serious except random reset.
Two days ago I rollback to 20161004 version which is perfectly stable in my opinion and everything went back to normal.
Sorry for not contribute with crash log.
Anyway, THANKS HardLight for you interest in update this KK rom.
can't install xposed
hi.. I've flash cm11 20161004 and installed xposed framework, it was running smoothly but how to install xposed on this rom, 20161214?
I tried many version of xposed installer for cm11/kitkat but still got bootloop. Is it possible to use xposed in cm11 20161214 version?
thanks..
Re-test
necromode said:
Sorry to say that 20161214 version that I flashed at december (dalvik and cache wiped) goes to my mobile in two sporadic problems: some random reset and some force closed, nothing serious except random reset.
Two days ago I rollback to 20161004 version which is perfectly stable in my opinion and everything went back to normal.
Sorry for not contribute with crash log.
Anyway, THANKS HardLight for you interest in update this KK rom.
Click to expand...
Click to collapse
Hi all, I reinstalled time ago 20161214 with complete wipes/factory reset and I want to say that after extensive test this is my 24/7 version with stable working.
google announced about edited version of android o called "android go" for low phones like xperia go , is there any plan to support it
Android GOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!!!
Xperia go Android go = makes sense xD
CyanogenMod 14 for Galaxy A5 A500xx
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE: this ROM is for any A500 model and will not work for 2016 models (A510)
NOTE2: The First build is for A500FU only!!!
Disclaimer:
Code:
I'm not responsable for bricked devices :( , dead phone chargers,
nuclear explosions or global warming.
Flash it at YOUR OWN RISK
Downloads1) You need a custom recovery to flash the ROM (zip). You can download TWRP HERE or CTR HERE
2) Optional but recomended: Google Apps (aka gapps). You can download them here: http://opengapps.org/
3) You need marshmallow bootloader and modem. you can download them HERE (for A500FU only) thanks to @jimbomodder that has uploaded them or you can easily extract them in stock firmware
4) You need the ROM obviusly . You can download it here:
CyanogenMod-14.0 (not supported anymore); https://www.androidfilehost.com/?w=files&flid=121527
CyanogenMod-14.1: https://www.androidfilehost.com/?w=files&flid=122650
for NON-FU variants (beta): CyanogenMod-14.1: https://www.androidfilehost.com/?w=files&flid=134211
5) For CM-14.0 ONLY!! (so not for CM-14.1): Download WiFi Fix (Working kernel modules) here: https://www.androidfilehost.com/?fid=312978532265363210
How to InstallIf you have TWRP Recovery:
1) Go to wipe section and wipe: cache, dalvik, system and data (internal storage wipe is not needed!)
2) Go to install box and choose the zip which contains the ROM
3) Flash wifi temporary fix (for first build only)
4) Optional but recomended: flash Google Apps' zip
5) Reboot and enjoy
If you have CTR Recovery:
1) Go to Wipe Menu, tap Wipe ALL - Preflash button and then tap - Yes - Wipe ALL! button
2) Go to Install zip menu and choose the zip which contains the ROM
3) Flash wifi temporary fix (for first build only)
4) Optional but recomended: flash Google Apps' zip
5) Reboot and enjoy
How to Update
If you have TWRP Recovery:
1) Go to install box and choose the zip which contains the ROM
2) Go to wipe section and wipe: cache and dalvik
If you have CTR Recovery:
1) Go to Install zip menu and choose the zip which contains the ROM
2) Go to Wipe Menu, and wipe cache and dalvik
NOTE: For Updating you don't have to wipe data, you only have to wipe data when install different cm version, for example cm-13->cm-14 or cm12->12.1
SM-A500XX SECTIONHow to install CyanogenMod-14.1 on any SM-A500XX variant:
1) Download the sm-a500xx cm-14.1 zip on "Downloads" section"
2) For make "port" process a bit easier do as following:
_1) Delete all files in system/etc/firmware (inside the zip)
_2) Go to META-INF/com/google/android/updater-script (in the zip) and remove all symlinks which start with /firmware and /firmware-modem
2) Use a root browser or adb pull and pull all files located in /firmware/image and /firmware-modem/image in the zip in /system/etc/firmware
2_a) If your device is dualsim, go to stock rom and copy /system/lib/libsecril.so and /system/lib/libsecril-dsds.so in the zip in system/lib/ Then open the system/build.prop in the zip and add:
persist.radio.multisim.config=dsds
3) Flash it and enjoy cm-14.1 on you SM-A500XX variant!!
Knowing Bugs:
_Screen Rotation not working
_Audio during calls bug
_Cellular Data not working
Segnale other bugs if u find in bugs section or here https://github.com/DeadSquirrel01/android_device_samsung_a5-common/issues
SOURCES
Device tree: https://github.com/DeadSquirrel01/android_device_samsung_a5ultexx Branch: cm-14.0
Device Config: https://github.com/DeadSquirrel01/android_device_samsung_a5-common Branch: cm-14.0
Kernel: https://github.com/DeadSquirrel01/android_kernel_samsung_msm8916 Branch: cm-14.1
Credits: @TheWhisp For his cm 13 device config, which I ported to cm 14, so, don't forget to leave him a thanks
Me (DeadSquirrel01) obviusly
Note: If you want to contact me for any question which is off topic, just pm me or email me at [email protected]
Please and i repeat please, do not ask for ETAs
XDA:DevDB Information
[Unofficial]CyanogenMod 14 for Galaxy A5 (SM-A500), ROM for the Samsung Galaxy A Series
Contributors
DeadSquirrel01
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Marshmallow bootloader and modem
Version Information
Status: Beta
Current Beta Version: 2.0
Beta Release Date: 2016-10-12
Created 2016-10-12
Last Updated 2016-10-12
CHANGELOGUpdate 1 (02/12/2016):
Fixed Bluetooth
Fixed "Device Model Unknown" in "About Phone" section
Upgraded Audio HAL to latest (caf LA.BR.1.2.9_rb1.8)
Fixed strange colors for example when scrolling status bar
Upgraded Sepolicy
NOTE: You can see all changes (github commits) here: https://github.com/DeadSquirrel01/android_device_samsung_a5-common/commits/cm-14.0
and here:https://github.com/DeadSquirrel01/android_device_samsung_a5ultexx/commits/cm-14.0
And for kernel here: https://github.com/DeadSquirrel01/android_kernel_samsung_msm8916/commits/cm-14.1
+1
My phone is now lolipop, so its will not work?
sopnohinsobuj said:
My phone is now lolipop, so its will not work?
Click to expand...
Click to collapse
Never tested with lollipop bootloader/modem. Anyway you can flash marshmallow ones, you can extract them from official firmware or install them from the link in the thread with odin
but...my phone A500F...how to work this rom
sopnohinsobuj said:
but...my phone A500F...how to work this rom
Click to expand...
Click to collapse
Oww, you can wait max 2 days for a500xx version, this is the first version which is for A500FU (testing version)
ok..I will wait
sopnohinsobuj said:
ok..I will wait
Click to expand...
Click to collapse
Otherwise if u don't want to wait u can modify the script by yourself, maybe search on internet....
I tried to install on my A500M, but not works, stucks in bootanimation. I think is because the modified updater-script i used from CyanogenMod 13.
I will wait for a5h release. Am far away from my computer.
codebseraph said:
I tried to install on my A500M, but not works, stucks in bootanimation. I think is because the modified updater-script i used from CyanogenMod 13.
Click to expand...
Click to collapse
You have to use a working template, otherwise it will not boot. PS cm13 contains the same script as this. Use the pacrom one
DeadSquirrel01 said:
You have to use a working template, otherwise it will not boot. PS cm13 contains the same script as this. Use the pacrom one
Click to expand...
Click to collapse
Thanks for the tip, i'll try it.
Also, this ROM works with MultiROM?
Fild5x said:
I will wait for a5h release. Am far away from my computer.
Click to expand...
Click to collapse
Well i tried using my phone by deleting the scripter only up to the first semi colon but was still getting updater error. Like i said, will wait.
Its working in a500m?
I have modified script of RR rom
This rom work perfectly but when i call some one i don't hear anything and he also hear nothing
any major bugs with this rom?..can i install for daily use?..tnx
great job OP! keeping an eye closely to this thread :highfive:
leviz0689 said:
any major bugs with this rom?..can i install for daily use?..tnx
Click to expand...
Click to collapse
The only bug I found is screen rotation not working and cellular data not working (but I don't know if I've finished cellular data or if it is a bug)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix v6.1.0 Oreo
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
DOWNLOADS
APLHA-2
DOWNLOAD GAPPS
Changelog
How to Build Resurrection Remix ROM Tutorial
Resurrection Remix Github Source
XDA Rules
Big thanks to:
XDA developers
LineageOS team
DU
Omni team
AND OF COURSE TO ALL THE SUPPORTERS, DONATORS AND USERS
What's working
RIL [partially]
WiFi
Bluetooth
HW video codecs
Almost any other hardware stuffs are working properly
BUGS/Not working
Flash
Offline charging doesn't work
Camera [nearly unusable at all]
RIL [crashes while choosing network provider on 3G signal]
[Using STK makes RIL crash also]
WiFi Direct/hotspot doesn't work
First time installing Resurrection Remix v6.1.0 to your Galaxy Core Prime, or coming from another ROM:
Install TWRP Recovery MUST USE VERSION 3.2.1-0 OR ASSERT ERROR OCCURS
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
Upgrading from an older build of this ROM
Wipe system partition, wipe dalvik-cache but not data partition
Optionally install Google Apps (GAPPS) (link above)
[NOTE]:
If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
This is Android Go build, which is "optimized" for devices with lower than 1GB RAM, so don't expect full features like older Android versions [should we need ordinary build also?]
Want some screenshots? Get them in Screenshot tab above
XDA:DevDB Information
RR Oreo, ROM for the Samsung Galaxy Core Prime
Contributors
HASH, remilia15
Source Code: https://github.com/ResurrectionRemix
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.4
Based On: LineageOS
Version Information
Status: Alpha
Created 2018-07-21
Last Updated 2018-07-24
Changelog :
Alpha-1
Initial Release
Alpha-2
Post #11
Reserved
I can't screenshot
Nice! Oreo on the way!
Very excited!??
The RIL symbols on the to seem to be white colour even on light status bar background?
Where I can get TWRP 3.2.1-0 recovery?
Arkellyga said:
Where I can get TWRP 3.2.1-0 recovery?
Click to expand...
Click to collapse
Just search twrp on google, open the rwrp official site, go to devices section and type g360 and click on tge name of our mobile. Then click on twrp version you want to download and on next page choose the server.
rambhakthanuman said:
Just search twrp on google, open the rwrp official site, go to devices section and type g360 and click on tge name of our mobile. Then click on twrp version you want to download and on next page choose the server.
Click to expand...
Click to collapse
Thanks a lot. I didn't know that our device have official TWRP.
I can't turn off screen and also can't take screenshot .
Some lagness while changing screen lock to pattern.
pankaj yadav8 said:
I can't turn off screen and also can't take screenshot .
Click to expand...
Click to collapse
You should turn off ambient display for fix this. It's help me
ALPHA-2
CHANGELOG:
Fixed screenshot
Fixed screenrecording
Fixed autorotation
Disabled always on display [AOD] by default
Fixed screen flickering
Download in OP
Plz fix camera
demchenko said:
Plz fix camera
Click to expand...
Click to collapse
It's a sensor bug in sources , it will take time to fix for Oreo ROMs
I can't install the Rom (alpha 2)
I am using latest twrp recovery 3.2.2-0
I also wipe data,cache ,dalvik/art cache ,and system too. before flashing
I get error called "updater process ended with error:7" while installing rom through twrp
pankaj yadav8 said:
I can't install the Rom (alpha 2)
I am using latest twrp recovery 3.2.2-0
I also wipe data,cache ,dalvik/art cache ,and system too. before flashing
I get error called "updater process ended with error:7" while installing rom through twrp
Click to expand...
Click to collapse
Search on YouTube how to remove it or:good
Or use rmrf instead of wiping:good:
sparrow101 said:
Search on YouTube how to remove it or:good
Or use rmrf instead of wiping:good:
Click to expand...
Click to collapse
I also used rmrf before formatting
pankaj yadav8 said:
I can't install the Rom (alpha 2)
I am using latest twrp recovery 3.2.2-0
I also wipe data,cache ,dalvik/art cache ,and system too. before flashing
I get error called "updater process ended with error:7" while installing rom through twrp
Click to expand...
Click to collapse
You shouldn't get an error 7 if you are using latest twrp.
Make sure it is twrp 3.2.x and it is error 7.
If it is , then to fix it remove assert from RR zip/meta-inf/com/google/android/updater-script
Flash it again
HASH said:
You shouldn't get an error 7 if you are using latest twrp.
Make sure it is twrp 3.2.x and it is error 7.
If it is , then to fix it remove assert from RR zip/meta-inf/com/google/android/updater-script
Flash it again
Click to expand...
Click to collapse
I also remove assert line but same issue.
In recovery while installing rom it also says
"E1001 :Failed to update system image.
After that get status 7 error
pankaj yadav8 said:
I also remove assert line but same issue.
In recovery while installing rom it also says
"E1001 :Failed to update system image.
After that get status 7 error
Click to expand...
Click to collapse
Idk why you get such errors.
Can u post the recovery log.
Twrp > advanced > copy log
Thanks hash for all your work. Still rocking your nougat RR here. Might as well mark that
RR nougat thread as stable instead of beta. Waiting for a slightly stable build of this ROM.
What's the internal memory of you guys device? I thought we had 8GB when I brought, now I have 5.5 GB only.