Hi,
My phone worke fine before, i have installed many custom rom 5.0.
But i have installed CSC Change, and run it, after that my phone can't detect sim
show me this message : "Invalid Sim card"
Please help me
i solved
i installed stock nc5 firmware , install SSU, and Region Lock,
then run SSU and after Region Lok .Sim was detected.
To try it with another custom rom, i installed (after install TWRP 2.8.7)
Note+5+Norma+V11+English, and all work fine, without install SSU or region lock.
My question is why i have this problem ??
Related
hi guys
I flash my phone(Asus Zenfone6) from CUCC rom to WW and it works perfectly, but after two days it was freezing and reboot and after that do not recognize my SIM cards !!! and say 'Sim card is not installed'
after factory reset and flash rom again with adb , two '(SKIP)' error is shown about 3G modem and install completed and so on no changed and still it say SIM not installed
please help me!!!!
solve?
did you solve your problem ? the same message appeared to me, but my problem is that my mobile navigation data does not work.
Hello, and thanks for helping me: I've used a Z7 Max since many month on 3.08 flashed on my phone without any problems. but after having flashed a new rom today (yirom's CM12), the phone cannot detect any sim, in no one slot.
I've tried to go back to 3.08, with nubia tool updater and with twrp recovery, but even after full wipes, impossible to detect sim cards. If I Check Msim settings, it says "deactivate", not "no card".
The phone never answer sim lock pin .
Is there a way to get out of there? Thank you very much and sorry for my english.
Flash another ROM (Z7max（NX505J）电信4G双卡 V3.22)
It is not a rom problem. I have lost IMEI, but have the .nv file. But when i try to nrestore them with qbst, the phone answer the pin code again and again and again....
Use google search
Stupid. For those who have this problem, i solved it by trying again 'd again with qbst (and force efs verification). Nota: my computer did 3 *.nv backup of imei, only one was correct, the bigger one.
I own a Lg G3 sprint ls990.I live in Bangladesh.My device was on android lollipop and it was fine.But due to restart and warming issues i flashed into stock kitkat rom using flashtool.After 91% of flashing a red screen poped up in my device it said "warning; not support qem=0" and in the flashtool app it said failed.But when I pulled out the battery and rebooted my device I saw everything is okay.Then I put on a working sim card and it couldn't detect the sim card.i tried with whole other working sim card but i couldn't detect.I changed my sim slot but that also cannot change the condition.I flashed with other roms but still nothing is happening.When i dial "*#06#" to know my imei it says "connection problem or invalid mmi code".......Now Im badly in need of your help guys.Please,do help guys.
Hello
I flash my phone s3 i9300 4.3 jelly bean to 4.4.(using TWRP and back-to-n00t_ROM_V9
I regret that i make this because now cannot detect sim card.
How resolve this problem?
Flash a stock ROM using Odin.
Plz can you give me a link to download rom (pda,csc,....)because a have just zip file to use with twpr.
Thank you very much
I want to tell you that I downloaded yesterday two version rom jelly bean 4.0 and 4.1
I flashed using odin but still the same error "insert sim card"
You can't use such old ROMs because these ROMs contain old modems that will not work with newer bootloaders.
Did you try sammobile.com (https://www.sammobile.com/firmwares/galaxy-s-/GT-I9300/) or updato.com (http://updato.com/firmware-archive-select-model?exact=1&q=GT-I9300) ?
Thank you
I'll tray
But I want to tell you that my device become unable to detect sim card after flashed with kitkat version the last firemware fors SIII I-9300, I think.
But I will tray your suggestion
I downloaded a rom from http://updato.com/firmware-archive-s...t=1&q=GT-I9300,
I flashed with odin correctly but still have a same error
"Insert sim card".
I'm sorry!
Give me plz other advise to resolve this problem
Does the sim card work in another phone?
Yes I tested
Finally I found the solution.
I had two problems (hardware and software):
1 / Sim card slot
2 / Firmware modem
I solved my problem in the following way:
I put a piece of paper in the slot of the sim card to reinforce it
Now the message "insert sim card" has disappeared, but another problem appears: "not registred on network"
I downloaded Patched_XXUGMK6_modem.zip
And it works well
Thank you my friends for your help
Phone displays "Network Locked SIM Card" Inserted after flashing a stock firmware
I recently uninstalled Magisk, and was able to only boot into download mode after. So, I downloaded a stock firmware for my s9+ 965f and flashed it through odin (using AP,BL, CP, CSC(didnt select HOME CSC). But after rebooting, the phone displays "Invalid SIM. Network Locked SIM Card Inserted".
It asks for PUK code to unlock the phone and the cellular service alone is not working now. My phone is already region unlocked and I have been using it for the past 8 months. Has anybody got this issue and any suggestions on how to solve it?
Previous OS: soldierx rom for 965f v12 on Oreo
What I did,
i) uninstall all modules in magisk,
ii) uninstall magisk,
iii) phone auto-reboot
iv) Now phone stuck in download mode. Cannot boot it
v) downloaded stock firmware G965FXXU2BRGA
vi) flashed through Odin(AP,BL,CP,CSC)
vii) Phone completely formatted and boots up.
"Error:Invalid SIM card inserted. Network Locked SIM card detected "
I am now being asked for PUK code or cellular service wont work
You need to contact your carrier for PUK code, its protective measure against too many wrong PIN attempts on specific SIM. Can't fix that with any flashing.
Uksav said:
You need to contact your carrier for PUK code, its protective measure against too many wrong PIN attempts on specific SIM. Can't fix that with any flashing.
Click to expand...
Click to collapse
This is where the problem is. You put any sim card in that phone, you get the same error. The sim card works fine if I put in any other phone. I am not sure but unistalling Magisk has caused "SIM Card Read Error" in my S9+. I even upgraded to Pie from Oreo and flashed 3 different stock firmwares but the sim card error exists.
@topjohnwu
I would appreciate if you can help me on this. Not sure how to fix the issue
Looking up the error message itself points to some sort of network/carrier lock. If I am reading regional lock and carrier lock definitions correctly the two are not the same..
Did you have the phone network unlocked or was it network unlocked when you had root installed? If the device was network unlocked when it was rooted and you flashed back to stock (which removes root) this might explain what is going on...
scottusa2008 said:
Looking up the error message itself points to some sort of network/carrier lock. If I am reading regional lock and carrier lock definitions correctly the two are not the same..
Did you have the phone network unlocked or was it network unlocked when you had root installed? If the device was network unlocked when it was rooted and you flashed back to stock (which removes root) this might explain what is going on...
Click to expand...
Click to collapse
This is an unlocked phone. I had magisk installed and when trying to uninstall it to upgrade to latest magisk, the device wont boot except download mode. So, I downloaded stock firmware and flashed it. Once I boot up with the new stock firmware, I get this error
There is some sort of lock on the phone, which is why your being asked for the code.
I think you should definetly try was what was suggested above.. trying to contact the carrier and see if they can give you the PUK code. If I recall correctly you get a few tries to enter it correctly before it won't let you anymore (and it might lock the phone up good or damage the sim)
I'm having a similar issue on a Verizon A50. Any progress?
Gowtham34 said:
This is an unlocked phone. I had magisk installed and when trying to uninstall it to upgrade to latest magisk, the device wont boot except download mode. So, I downloaded stock firmware and flashed it. Once I boot up with the new stock firmware, I get this error
Click to expand...
Click to collapse
depending on what method was used to unlock it, its likely no longer unlocked. some sellers of unlock codes neglect to mention that part. im betting its locked again