Related
hello, my name is shahrukh and i need some help. i downloaded animmod (from 4shared) and then i donwloaded busybox. then i pressed blur and then it asked me if i want to reboot it. i pressed yes. this is when the problem starts. It turned off and then it turned on half way and then it turned off. it kept doing that and then i just left it for the night. in the morning it was not doing anything. when i held the power button it turned off and on for like two times and then turned off. i cant even start it up so i have no idea what to do.
i don"t know what to do
please help!!!!
Okay, we need details, describe exactly when "halfway on" is. We need your full model number and rom version (if you know it). Have you tried plugging it in to charge? Does it show anything now that you try to boot it? try holding volume up and powering on to enter recovery menu.
details
ok so when it turns on it says samsung. then after like 10 seconds it turns off. it does that for a few times and then it just goes in a black screen. the model number is YP-G7OC/NAW. when i plug it in to charge it goes on and off two times and then off. if it has low battery it just shows the sign. as for the rom i don't think i have any. i just rooted it using superoneclick. if it goes to recovery mode what do i do?
thanks!
(you got me really fired up when i saw the recovery menu!)
If you can get to recovery menu, try a factory reset, and clear cache. I am not sure if there is a recovery rom for your device, you should check samfirmware.com
tried both of them...no luck. and i couldn't find a recovery rom on samfrimware.com.
Your device has capacitive or mechanical home button?
it has a capacitive home button...the usa version
shahrukhraza said:
it has a capacitive home button...the usa version
Click to expand...
Click to collapse
The phone boots in recovery?
If so, I can investigate a little more what's happening.
I'll try to post a return-to-stock image soon... The problem is that mine is cluttered with crap that the zergRush exploit added (it insisted on installing busybox instead of just rooting...)
(I'm not sure, but I think someone else already posted a stock zImage and system image...)
Here is the post about fixing capacitive buttons. A quick search of forum should have found it.
http://forum.xda-developers.com/showthread.php?t=1421797
Sent from my YP-G70 using Tapatalk
nooooooo!!! you guys have all got it wrong. first of all it doesnt boot in recovery. the only way to get in recovery mode is when it shows the battery sign i hold "up volume"+ power button.and the capaciative button is completely fine. im just stuck in a bootloop (i think) and it has nothing to do with a broken capacitive button! i will try to post a video today to show you guys exactly whats happening.
i kind of had the same problem, one time i thought i had entropy's kernel on and i had CWM well i didn't but i still thought i had so i tried rebooting into recovery using the terminal:
su
reboot recovery
then i turned off and went to this weird recovery menu it had four options, reboot system, apply update from SD card, wipe data partition, and power off and it had a ton of red letters and words saying like, couldn't access data partition or cache partition and couldn't access /data/media, or system, and then i just turned it off because i wouldn't let me choose an option, and then i got stuck in a loop but not during when it says SAMSUNG mine happened during the animation music part that look like fireworks and then SAMSUNG would light up blue then go through it again and 2 more times then go black and i tried flashing the US stock ROM in download mode but still would go through the loop and it doesn't even charge so i got nothing
so did you somehow fix yours? and i never got a recovery menu that showed something about shut down.:confused
Before brick
xxxxxxxxxxxxxxxxx
wait....are you asking me those questions? just to tell you im no developer or something. im just a 12 year old who has his galaxy player stuck in a boot loop. you have to make another thread if you have a problem.
sorry!
Ok. : ) You got it wrong. No problem. His case is different from mine. Just wanted to use her Brick in case. Nothing more. good luck.
I resolve my doubts alone. Nothing that Google does not respond. haha
At least before brick.
ok. let me ask google too xD
anyways..anyone have any idea of how to fix this boot loop?
im trying to do the Linux thing by running the ressurector ans the VM windows the forum is posted under development called hard brick recovery for galaxy 5.0
ok.(i have no idea what you are saying...just saying!)
it charges and when i try to turn it on, it just get stuck on bootloop. I tried the hard reset, it doesn't work. im so frustrated. please help!
jmserapion said:
it charges and when i try to turn it on, it just get stuck on bootloop. I tried the hard reset, it doesn't work. im so frustrated. please help!
Click to expand...
Click to collapse
First off are you rooted? Do you have a custom recovery installed? Are you running a custom ROM or kernel? If you you have a custom recovery did you make a backup? If you can provide some more details I can try to help you out.
Sent from my SCH-I535 using xda premium
Alcatel OT5020t - Mediatek BOOTLOOP SOLVED!!
jmserapion said:
it charges and when i try to turn it on, it just get stuck on bootloop. I tried the hard reset, it doesn't work. im so frustrated. please help!
Click to expand...
Click to collapse
I know this thread is old but I suffered from this too and studied the web for days, tried mtk tools, sp tools, adb sideload. Nothing worked. Well, after days of fiddleing I figured out how to get ADB shell to work. Now in my case i knew i had a bad build.prop. So i knew what to replace.
Instead of holding 'vol-up' + 'pwr' buttons for recovery, Hold 'vol-dwn' + 'pwr' butons til it starts. my screen stayed on the one touch logo screen. It must boot up into the preloader. I was then able to run proper adb commands to replace my build.prop.
Hope this helps anyone that stumples across this. cause i know how frustrating it is to spend countless hours on a problem and get no where. If i can help, Reply to this.
If this helps, Please click Thanks!
edit- Let me say this only allows you to fix files you might have messed up editing. This will not allow you to recover from flashing a bad Recovery, as far as i know.
Pop c7 7041x
aaron74 said:
I know this thread is old but I suffered from this too and studied the web for days, tried mtk tools, sp tools, adb sideload. Nothing worked. Well, after days of fiddleing I figured out how to get ADB shell to work. Now in my case i knew i had a bad build.prop. So i knew what to replace.
Instead of holding 'vol-up' + 'pwr' buttons for recovery, Hold 'vol-dwn' + 'pwr' butons til it starts. my screen stayed on the one touch logo screen. It must boot up into the preloader. I was then able to run proper adb commands to replace my build.prop.
Hope this helps anyone that stumples across this. cause i know how frustrating it is to spend countless hours on a problem and get no where. If i can help, Reply to this.
If this helps, Please click Thanks!
edit- Let me say this only allows you to fix files you might have messed up editing. This will not allow you to recover from flashing a bad Recovery, as far as i know.
Click to expand...
Click to collapse
I have 7041x stuck in boot loop. Flashing a rom by CVM doesnt even help. Could you please tell us how you fixed yours.?
aaron74 said:
I know this thread is old but I suffered from this too and studied the web for days, tried mtk tools, sp tools, adb sideload. Nothing worked. Well, after days of fiddleing I figured out how to get ADB shell to work. Now in my case i knew i had a bad build.prop. So i knew what to replace.
Instead of holding 'vol-up' + 'pwr' buttons for recovery, Hold 'vol-dwn' + 'pwr' butons til it starts. my screen stayed on the one touch logo screen. It must boot up into the preloader. I was then able to run proper adb commands to replace my build.prop.
Hope this helps anyone that stumples across this. cause i know how frustrating it is to spend countless hours on a problem and get no where. If i can help, Reply to this.
If this helps, Please click Thanks!
edit- Let me say this only allows you to fix files you might have messed up editing. This will not allow you to recover from flashing a bad Recovery, as far as i know.
Click to expand...
Click to collapse
hello,
can anyone help me please ? i have flashed my alcatel one touch fierce 2 7040n with the wrong flash, now it's stuck in bootloop i have just access to recovery mode so i tried wipe data/factory reset and wipe cache partition but there's no change. then i installed adb and all usb drivers on my pc and tried to send the zip package with adb sideload but it dosen't work. so i tried my last chance to update from sd card, i put the zip file package in the root of a formatted sd card, the phone detect the sd card and mount it correctly but the files was not showing (just like it's empty) i don't know why, is there any solution for that issue ?
i really need your help and thank you in advance.
nabil_rachak said:
hello,
can anyone help me please ? i have flashed my alcatel one touch fierce 2 7040n with the wrong flash, now it's stuck in bootloop i have just access to recovery mode so i tried wipe data/factory reset and wipe cache partition but there's no change. then i installed adb and all usb drivers on my pc and tried to send the zip package with adb sideload but it dosen't work. so i tried my last chance to update from sd card, i put the zip file package in the root of a formatted sd card, the phone detect the sd card and mount it correctly but the files was not showing (just like it's empty) i don't know why, is there any solution for that issue ?
i really need your help and thank you in advance.
Click to expand...
Click to collapse
It's been so long since i messed with these Alcatel phones. But if i recall, you can take the rom zip or update zip, and you have to rename it to some special name. Then you put it on sd card and it'll install to phone.
But in your case, if you flashed wrong. There might be something else.
But either way. Since you can boot into recovery or bootloader you should be able to push stock firmware to device. You need to make sure you get the correct files for your device.
This is most i can tell you. I've been using samsung devices for past years and forgot alot about flashing devices such as this through adb.
All i can say is, at least it doesn't seem like your hard bricked. As long as you can get into bootloader mode or recovery, you should have a way to fix. Search and Google around! Good luck!
---------- Post added at 06:35 PM ---------- Previous post was at 06:23 PM ----------
Whenever learning to mess with phones and roms with adb and fast boot. As a lot of devices are different, but some simple key facts to follow are as follows.
Find out your devices partition layout (which partition is boot, system, recovery)
Don't mess with any other partition but them.
Always, always make a backup of all partitions with 'dd' command. And keep safe.
Need build prop
aaron74 said:
I know this thread is old but I suffered from this too and studied the web for days, tried mtk tools, sp tools, adb sideload. Nothing worked. Well, after days of fiddleing I figured out how to get ADB shell to work. Now in my case i knew i had a bad build.prop. So i knew what to replace.
Instead of holding 'vol-up' + 'pwr' buttons for recovery, Hold 'vol-dwn' + 'pwr' butons til it starts. my screen stayed on the one touch logo screen. It must boot up into the preloader. I was then able to run proper adb commands to replace my build.prop.
Hope this helps anyone that stumples across this. cause i know how frustrating it is to spend countless hours on a problem and get no where. If i can help, Reply to this.
If this helps, Please click Thanks!
edit- Let me say this only allows you to fix files you might have messed up editing. This will not allow you to recover from flashing a bad Recovery, as far as i know.
Click to expand...
Click to collapse
Where would I find the build prop bro? Thx
I apologize if this is in the wrong place, and I've really tried searching around, but nothing seems to work/ is tailored to the m8.
So, I just got an M8 new out of the box, rooted it and successfully installed cyanogenmod. Problem is, I was playing around with it, trying to get the GApp store and somehow (did what i think was) deleted my roms completely. Now upon booting up the phone I just get the "This build is for dev..." screen, and with the volume down+Power button to access recovery mode I constantly get put back to the fastboot screen. I tried flashing a custom recovery as in "Phone arena CWM flash recovery" guide, but no luck because my computer is reading the device as offline. I honestly have no idea what to do, and if anyone could help me I would be so greatful...
TL;DR: Stuck on boot screen, can't enter recovery mode, think i deleted all my roms, help please
On a scale of 1 - bricked, how bricked is my phone?
HUGE DEVELOPMENTS, GUYS! I've been able to access recovery mode again by re-flashing ClockWorkMod.
ctran1 said:
On a scale of 1 - bricked, how bricked is my phone?
Click to expand...
Click to collapse
On that scale, you are zero. If the screen comes on, you aren't bricked.
Hey guys i got a slight problem.
I had the Android Revolution HD Rom and i was trying to install another one , it really wasnt my first time doing this however this time a problem occurred.
My volume side buttons are not working so i couldnt get into recovery mode using them also on top of that the rom itself didnt have the option to go to recovery when turning off the phone.
I downloaded the Quick boot tool apk from Playstore and used it to go to recovery... I WISH I DIDNT
now my phone when turned on shows samsung logo and it goes to recovery and quickly goes back to the logo and loops in that way...
Is there anyway to access the download mode without pressing them sidebuttons, i even tried ODIN but it cant recognize the phone because it keeps looping...
I am clueless now and any help would be appreciated.
Sorry for spelling or any typos i am really angry atm.
alioni said:
Hey guys i got a slight problem.
I had the Android Revolution HD Rom and i was trying to install another one , it really wasnt my first time doing this however this time a problem occurred.
My volume side buttons are not working so i couldnt get into recovery mode using them also on top of that the rom itself didnt have the option to go to recovery when turning off the phone.
I downloaded the Quick boot tool apk from Playstore and used it to go to recovery... I WISH I DIDNT
now my phone when turned on shows samsung logo and it goes to recovery and quickly goes back to the logo and loops in that way...
Is there anyway to access the download mode without pressing them sidebuttons, i even tried ODIN but it cant recognize the phone because it keeps looping...
I am clueless now and any help would be appreciated.
Sorry for spelling or any typos i am really angry atm.
Click to expand...
Click to collapse
You can use Android Debug Bridge (ADB) to enter whether download mode or recovery.
josephiskandar said:
You can use (ADB) to enter whether download mode or recovery.
Click to expand...
Click to collapse
I will try this and get back to you.
Thanks
josephiskandar said:
You can useAndroid Debug Bridge (ADB) to enter whether download mode or recovery.
Click to expand...
Click to collapse
Did everything and it still does the same loop, from logo to partially loaded recovery and back...
alioni said:
Did everything and it still does the same loop, from logo to partially loaded recovery and back...
Click to expand...
Click to collapse
It doesn’t sound good then. Please read again threads like this on how to recover from a bootloop. If you really can’t access neither recovery or download mode using adb, that’s out of my knowledge, and you might need to read about how to fix a hard brick. There’s a thread about that in these stickies.
josephiskandar said:
It doesn’t sound good then. Please read again threads like this on how to recover from a bootloop. If you really can’t access neither recovery or download mode using adb, that’s out of my knowledge, and you might need to read about how to fix a hard brick. There’s a thread about that in these stickies.
Click to expand...
Click to collapse
i managed to get into download mode however prior the brick i didnt enable developer mode on the phone and now the pc cannot recognize it when connected.
Developer switch is irrelevant to download mode, search the many threads on things to try to get Odin connected.
Hello, as you can see the title, because of my stupid friend, my tablet can't work well now..
He set the password in my tablet and I didn't even noticed at that time.
After I asked him the password, He told me He forgot it.
Unfortunately, that was true, so for unlocking the tablet, I did the wipe data and factory reset.
That was the problem.
After did that, my tablet starts to bootloop, just showing the dell logo.
I tried to access the recovery mode again, but all I can see is that the broken robot, and can't go next step.
I searched the similar threads and I found that if I can approach the fastboot menu, it is able to unbrick the tablet.
I could approach that menu which I can choose normal boot, power off, reboot fastboot, and recovery mode, but that's it. I pressed the volume buttons (up & down simultaneouly) tried many times to recovery mode but after did the factory reset, it couldn't do it again.
Could you give me some advice to solve this problem? I'm looking forward to getting the solution. Thanks. :crying:
guesstres said:
Hello, as you can see the title, because of my stupid friend, my tablet can't work well now..
He set the password in my tablet and I didn't even noticed at that time.
After I asked him the password, He told me He forgot it.
Unfortunately, that was true, so for unlocking the tablet, I did the wipe data and factory reset.
That was the problem.
After did that, my tablet starts to bootloop, just showing the dell logo.
I tried to access the recovery mode again, but all I can see is that the broken robot, and can't go next step.
I searched the similar threads and I found that if I can approach the fastboot menu, it is able to unbrick the tablet.
I could approach that menu which I can choose normal boot, power off, reboot fastboot, and recovery mode, but that's it. I pressed the volume buttons (up & down simultaneouly) tried many times to recovery mode but after did the factory reset, it couldn't do it again.
Could you give me some advice to solve this problem? I'm looking forward to getting the solution. Thanks. :crying:
Click to expand...
Click to collapse
Reflash firmware with intel flash tool.
Look THIS thread and follow instruction.
Thanks for your tips!
minnaing said:
Reflash firmware with intel flash tool.
Look THIS thread and follow instruction.
Click to expand...
Click to collapse
Thanks for your tips!
I followed the steps which you told me, and I could flash that files.
But after did that, it made the tablet freeze, not bootloop.
The screen just shows dell logo and didn't work well. I waited for 15 minutes, even more but it didn't work well.
And still I can't approach the recovery mode. Just I can see the broken robot..
Is there anything I can do? Hope to get advice :'(