Related
I was flashing my Vibrant back to the stock ROM using ODIN, and I had the re-partition checked off... and I think this is what killed my vibrant. If I click the power button it doesn't do anything. It has a full battery and even with it on the charger... still nothing. I can't see anything on the screen. What are my options to fix my Vibrant?
Timz917 said:
I was flashing my Vibrant back to the stock ROM using ODIN, and I had the re-partition checked off... and I think this is what killed my vibrant. If I click the power button it doesn't do anything. It has a full battery and even with it on the charger... still nothing. I can't see anything on the screen. What are my options to fix my Vibrant?
Click to expand...
Click to collapse
What were you flashing to stock from?
Can you enter download mode?
Sent from my GT-I9000 using Tapatalk
HELP IM SO WORRY HAS SAME PROBLEM OR WORSE
I upgraded to froyo 2.2 using Kies mini, and follow each step, till it finish of donwloading the oficial download from their server, in the tutorial says to wait for it to reboot but never did. what could happend? now im not able to power on, put in download mode, etc cause its acting like its dead, not even the usb im so scared caus ei just bought it on ebay HELLPPPPP PLEASE.
letor69 said:
HELP IM SO WORRY HAS SAME PROBLEM OR WORSE
I upgraded to froyo 2.2 using Kies mini, and follow each step, till it finish of donwloading the oficial download from their server, in the tutorial says to wait for it to reboot but never did. what could happend? now im not able to power on, put in download mode, etc cause its acting like its dead, not even the usb im so scared caus ei just bought it on ebay HELLPPPPP PLEASE.
Click to expand...
Click to collapse
Following these guide: http://forums.t-mobile.com/t5/Samsu...-upgrade-to-Android-2-2-Froyo-now/td-p/678871
Here are a couple of things to try. There are videos out there on utube also.
http://forum.xda-developers.com/showthread.php?t=954509
http://forum.xda-developers.com/showthread.php?t=819551
No I can't enter Download mode. I have no power at all.
nomadrider123 said:
Here are a couple of things to try. There are videos out there on utube also.
http://forum.xda-developers.com/showthread.php?t=954509
http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
Have you tried a simple
pull the battery
put the battery back after a few second
start ODIN
connect USB to PC, but not to phone
hold the volume +/- key
connect USB to phone while holding vol +/- keys
http://www.youtube.com/watch?v=E9LYLoK1Qog
http://www.youtube.com/watch?v=qNts11IBZ8Y
I click the power button nothing happens. I plug in the usb, nothing happens.
Timz917 said:
I click the power button nothing happens. I plug in the usb, nothing happens.
Click to expand...
Click to collapse
Have you tried both at the same time?
pull the battery
put the battery back after a few seconds
start ODIN
connect USB to PC, but not to phone
hold the volume +/- key
connect USB to phone while holding vol +/- keys
nomadrider123 said:
Have you tried both at the same time?
pull the battery
put the battery back after a few seconds
start ODIN
connect USB to PC, but not to phone
hold the volume +/- key
connect USB to phone while holding vol +/- keys
Click to expand...
Click to collapse
SAME AS ME heeeeeeelllpppp
not a single button is working, either JIG i have it, what can i do?
Sorry to disappoint you; it seems that you are out of luck. I was flashing my Vibrant in the similar situation like yours and my phone has never turned on again since then (6 weeks). I live in Thailand and have been searching both English and Thai version for a solution. None comes up so far. The only way the USB jig will help is your phone can be powered up. I have tried that myself. You can look for the confirmation elsewhere in this forum. Any way if you can find a diy solution, please let me know and I will post it here if I can find one myself. Thanks!
http://forum.xda-developers.com/showthread.php?t=848737
I am wait on this line here on your link.
More methods coming soon
do you have insurance with tmobile?
i bricked mine before i had a good understanding of the whole rom flashing concept and i could get a downloading screen but i didnt know what to do so they replaced it with no problem.
call and ask all they can do is say no.
nomadrider123 said:
http://forum.xda-developers.com/showthread.php?t=848737
Click to expand...
Click to collapse
they bro, i appreciate that your trying to help the guy but read.
the title states its a "HARD BRICK" meaning it will not turn on. If the OP has enough sense to name the thread its a HARD brick, then i'm sure he knows what a hard brick is. All solutions your leading to cannot be done AT ALL. The phone is a paperweight, you cant do anything but 2 things:
@OP
Do one of these 2 things:
1) build a JIG costs around 10$ a bit more or a bit less. but no over than 15$
(search JIG for vibrant on youtube by mobiletechvideos)
2) Send it to tmobile.
I hard bricked my phone 4 days ago.
I called them, and their sending in a replacement, and i send them mine and im done.
It cost me 10$ for shipping and handling but thats it.
Timz917 said:
I was flashing my Vibrant back to the stock ROM using ODIN, and I had the re-partition checked off... and I think this is what killed my vibrant. If I click the power button it doesn't do anything. It has a full battery and even with it on the charger... still nothing. I can't see anything on the screen. What are my options to fix my Vibrant?
Click to expand...
Click to collapse
HOW ABOIUT LEAVE PHONE CHARGING FOR 10 GO IN TO DARK ROOM SHUT OFF LIGHT PRESS POWER BUTTON AND SEE IF BACK LIGHT OF SCREEN LIGHTS UP, IF SO I TOLD YOU SO I HAD THE SAME BUT MY VIBRANT WORKS AGAIN UNLIKE YOURS p
xriderx66 said:
they bro, i appreciate that your trying to help the guy but read.
the title states its a "HARD BRICK" meaning it will not turn on. If the OP has enough sense to name the thread its a HARD brick, then i'm sure he knows what a hard brick is. All solutions your leading to cannot be done AT ALL. The phone is a paperweight, you cant do anything but 2 things:
@OP
Do one of these 2 things:
1) build a JIG costs around 10$ a bit more or a bit less. but no over than 15$
(search JIG for vibrant on youtube by mobiletechvideos)
2) Send it to tmobile.
I hard bricked my phone 4 days ago.
I called them, and their sending in a replacement, and i send them mine and im done.
It cost me 10$ for shipping and handling but thats it.
Click to expand...
Click to collapse
Your first option is out because I have tried that. The only option left is the second one. since I live in Thailand, I have to ship the phone to my friend in Los Angeles to have him replace it for me. It is costly, but at least I will get a phone to work.
It seems to me that this issue is a special case that doesn't happen very often. Only the chosen ones will get into trouble like this when making an error here and there while flashing rom.
I had an IPhone 3G before and, of course, I made mistakes while updating it with all kinds of firmware, but the hardware never fails on me no matter what I did.
Thanks all who try to help.
xriderx66 said:
they bro, i appreciate that your trying to help the guy but read.
the title states its a "HARD BRICK" meaning it will not turn on. If the OP has enough sense to name the thread its a HARD brick, then i'm sure he knows what a hard brick is. All solutions your leading to cannot be done AT ALL. The phone is a paperweight, you cant do anything but 2 things:
@OP
Do one of these 2 things:
1) build a JIG costs around 10$ a bit more or a bit less. but no over than 15$
(search JIG for vibrant on youtube by mobiletechvideos)
2) Send it to tmobile.
I hard bricked my phone 4 days ago.
I called them, and their sending in a replacement, and i send them mine and im done.
It cost me 10$ for shipping and handling but thats it.
Click to expand...
Click to collapse
Just because he put hard bricked in the title means little. It was his first post. He very well could be a aviid user. All I could go by is he said he hit power and nothing happend thats about all he said over and over. No battery pull 3 button try. So what I did was try to help thats it. I did not suggest anything to make matters worse. A lot of ppl thought their phones were "hard bricked" but they got it to come out of it. Just because your more of a wiz then most ppl here. I would appreciate if you would get off my back a bit for I was just trying to help.
nomadrider123 said:
Just because he put hard bricked in the title means little. It was his first post. He very well could be a aviid user. All I could go by is he said he hit power and nothing happend thats about all he said over and over. No battery pull 3 button try. So what I did was try to help thats it. I did not suggest anything to make matters worse. A lot of ppl thought their phones were "hard bricked" but they got it to come out of it. Just because your more of a wiz then most ppl here. I would appreciate if you would get off my back a bit for I was just trying to help.
Click to expand...
Click to collapse
I'm not getting on your back, why is it you think so?
Most of the users as i've encountered don't have the sense to name their threads appropriately, the OP on this one specifically named it HARD BRICKED, so instead of telling him to do all these instructions, you could've asked 1 thing "when you plug your usb, or wall charger, does it show any lights? or Are there any symbols on the screen? any lights glowing?"
Those 2 questions could've saved him, and you time.
Trust me i'm a beginner as well, i just know how to get out of these because i've been with this problem a few times. Alot of people here know more than me, specifically s15.. idk his full name.
Hi people, I have a i777 but the phone does not turn on at all, what happens is that it will turn the screen on when you plug it in, show the battery image for less then a second and do that 2-3 times before it just stays blank. computer doesnt recognize it or do anything when pluged to it.
Left it plugged in to charge and the phone got very hot. I have not attempted anything with the phone its not even rooted, just stopped working.
Please if any one has any tips or anything that can assist I would really appreciate it.
When did you buy it?
Did you try a battery pull, wait a bit, then put it back and connect the charger without turning it on.
Cetus90 said:
Hi people, I have a i777 but the phone does not turn on at all, what happens is that it will turn the screen on when you plug it in, show the battery image for less then a second and do that 2-3 times before it just stays blank. computer doesnt recognize it or do anything when pluged to it.
Left it plugged in to charge and the phone got very hot. I have not attempted anything with the phone its not even rooted, just stopped working.
Please if any one has any tips or anything that can assist I would really appreciate it.
Click to expand...
Click to collapse
I would say return it for a replacement.
Sent from my GT-I9100 using xda premium
chadrick.7 said:
I would say return it for a replacement.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yea but first it would be good to remove any personal things and backup what you can before doing so.
Have you tried getting into recovery or download mode.
sent from my Shostock Sgh-I777 running siyah!
Hey guys sry for reviving this thread its just ive been reading and its driving me kinda crazy. ( i miss my Palm !!!)
So i figured out somethings about the phone, It does go into bootloader mode only if i take out the battery and plug it in, with battery it does nothing at all.
Theres so much info about roms and all this other things i cant quite figure exactly what i need to do with the phone. I'm trying to find a stock rom, but like i said i don't know if its the room, bootloader, kernal or what the hell it needs to fix it.
Please anytips or questions or leads that can guide me.
Model is SGH I777
(Also can't really return it or do anything with at&t since I'm in Colombia, plus att just sucks)
Cetus90 said:
Hey guys sry for reviving this thread its just ive been reading and its driving me kinda crazy. ( i miss my Palm !!!)
So i figured out somethings about the phone, It does go into bootloader mode only if i take out the battery and plug it in, with battery it does nothing at all.
Theres so much info about roms and all this other things i cant quite figure exactly what i need to do with the phone. I'm trying to find a stock rom, but like i said i don't know if its the room, bootloader, kernal or what the hell it needs to fix it.
Please anytips or questions or leads that can guide me.
Model is SGH I777
(Also can't really return it or do anything with at&t since I'm in Colombia, plus att just sucks)
Click to expand...
Click to collapse
It would be helpful if you could give some details of the problem that you have. We can't just assume that you have the exact same issue that the original poster described in the first post. Please describe your problem in detail. The phone will/won't turn on. The screen is/isn't completely dead. etc.
A little background would also be helpful. How long have you had the phone? Was it working before? Where did you get it? etc.
Need enough information to begin trouble shooting the problem. Will be happy to help if I can.
I had exactly the same problem with my SII. I bought an external charger for the battery, recharged the battery using that and worked fine afterwards (the charger I bought came with a couple of spares which was a bonus as well ;-).
My guess is the battery is empty, leave it on the charger for a bit and try again
Sent from my SGH-I777 using xda premium
creepyncrawly said:
It would be helpful if you could give some details of the problem that you have. We can't just assume that you have the exact same issue that the original poster described in the first post. Please describe your problem in detail. The phone will/won't turn on. The screen is/isn't completely dead. etc.
A little background would also be helpful. How long have you had the phone? Was it working before? Where did you get it? etc.
Need enough information to begin trouble shooting the problem. Will be happy to help if I can.
Click to expand...
Click to collapse
LOL creepy he is the op.
sent from my Shostock Sgh-I777 running siyah!
Hey there,
I had a similar problem with my battery, it turns out that the charger I was using essentially fried my battery.
Go to an AT&T store (which stock i777 batteries and USB chargers) and explain your problem to them. If this just happened without installing any ROMs or rooting, there's no reason to flash anything, and it's likely a hardware problem. Explain the problem and they will let you borrow a new battery and charging cable to see if it makes a difference.
Otherwise, if this happened out of the blue like that, without any interventions or changes on your part, you should take the advice of the other posters and make use of your warranty.
- Flaw
Intub8 said:
LOL creepy he is the op.
sent from my Shostock Sgh-I777 running siyah!
Click to expand...
Click to collapse
Blind... lol
Thanks guys for the responses.
*story is i sold the phone to someone and i brought it back since it was not turning on*
Ive had time now to research a bit on android and this phone.
I think its hard bricked the phone does not go to download mode when you press the keys even with a full battery *charged it in anoher phone*
I can get it into download mode only when he battery is taken out of the phone... Once its in download mode i tried to flash the stock rom with Odin and stock kernel, but when its done flashing the phone tries to restart but nothing happens the screens turns on and off and the bottom keys flash in and out.
Ive read that you can use a Jtag or w/e you call it *the micro usb with the resistors in i* but since im in Colombia its hard to find those type of electronics off he shelf*
Anyway if any one has any thoughts or ideas to fixing it with out the battery in it while its in download mode i would really appriciate it ^_^
thanks again for the responses
warranty exchange
Cetus90 said:
Hi people, I have a i777 but the phone does not turn on at all, what happens is that it will turn the screen on when you plug it in, show the battery image for less then a second and do that 2-3 times before it just stays blank. computer doesnt recognize it or do anything when pluged to it.
Left it plugged in to charge and the phone got very hot. I have not attempted anything with the phone its not even rooted, just stopped working.
Please if any one has any tips or anything that can assist I would really appreciate it.
Click to expand...
Click to collapse
Im just asking since you didnt mention it... Did you press the power button for at least 3 seconds? My Grandfather did this. Took back his phone only to discover that he had not pushed the power button long enough to turn it on. Sometimes you never know...
I had this same problem. Discovered it was just a dead battery. Battery in, I get nothing. Battery out and I can see the buttons flash when connected to a power source. So obviously its the battery.
edit: Since I still have the dead battery thought I would test out the download mode. Got it to boot into download mode without the battery, then started to put in the battery. As soon as the contacts touched, my phone turned off. No idea what happened to this battery..
Cetus90 said:
Thanks guys for the responses.
*story is i sold the phone to someone and i brought it back since it was not turning on*
Ive had time now to research a bit on android and this phone.
I think its hard bricked the phone does not go to download mode when you press the keys even with a full battery *charged it in anoher phone*
I can get it into download mode only when he battery is taken out of the phone... Once its in download mode i tried to flash the stock rom with Odin and stock kernel, but when its done flashing the phone tries to restart but nothing happens the screens turns on and off and the bottom keys flash in and out.
Ive read that you can use a Jtag or w/e you call it *the micro usb with the resistors in i* but since im in Colombia its hard to find those type of electronics off he shelf*
Anyway if any one has any thoughts or ideas to fixing it with out the battery in it while its in download mode i would really appriciate it ^_^
thanks again for the responses
Click to expand...
Click to collapse
Not sure what you used to flash back to stock, but if you didn't try it already, I would try the full stock package with bootloaders, param.lfs and all. Go to the Download Repository and flash the I777UCKH7-CL503881 Stock Binaries. The one-click downloader would be fine.
As far as the battery goes, even though you charged it in another phone, it may still be faulty. To test, use a known good battery from another phone.
Oh, and one other thing. Just curious, was the phone working normally when you sold it?
creepyncrawly said:
Not sure what you used to flash back to stock, but if you didn't try it already, I would try the full stock package with bootloaders, param.lfs and all. Go to the Download Repository and flash the I777UCKH7-CL503881 Stock Binaries. The one-click downloader would be fine.
As far as the battery goes, even though you charged it in another phone, it may still be faulty. To test, use a known good battery from another phone.
Oh, and one other thing. Just curious, was the phone working normally when you sold it?
Click to expand...
Click to collapse
Yes it was working.
Thanks alot for that info ill try it tonight or tomorrow!
Also i think ill be making a video showing whats going on and ill get a battery from a friend to test out, thanks alot again this really has helped me understand more ^^
Cetus90 said:
Yes it was working.
Click to expand...
Click to collapse
Seems to me you were generous to take it back. I wouldn't be surprised if the person flashed some firmware not intended for the I777, with bootloaders and param.lfs and such.
Yeah but kinda had a deal so not loosing much but i still want to fix it.
Let me ask you guys will it be fine to flash without the battery in the phone? Since it does open up the bootloader to and Odin detects it.
Hey,
I didn't feel like going through the trouble of buying the Motorola factory charger or whatever you need to charge the phone when it said *battery low* *cannot program* when trying to use the RSD program (might have spelled it wrong) to restore to factory settings. My battery must have been low and in the middle of the restore, it stopped and now Im unable to get to either recovery or charge it.
I had insurance luckily so I just got my galaxy nexus back and should be to me tomorrow. Do yall think someone will buy this phone like that? i have 2 nandroid backups on there so it's probably not safe to sale with that stuff accessible.. smh.. that's why i liked the samsung galaxy s and galaxy s 2 devices because you can use Odin which makes the phones virtually unbrickable. The phone's in PERFECT condition. Would be nice if there was a way around that man
how much? just curiosity...
That's why its always recommened to have full charge when rooting or installing custom rom. I hope someone here in the forum can help you solve this issue.
you can make one looks like here:
http://forum.xda-developers.com/showthread.php?t=1403100
if you want to give it a go, will cost you a $3 cable if you mess it up, and will gain you a $300 phone if you do it right.
joel_sinbad said:
how much? just curiosity...
Click to expand...
Click to collapse
I realized i can't sale it because I have nandroid backups within the phone and they'll still be there i think...
romdroid. said:
That's why its always recommened to have full charge when rooting or installing custom rom. I hope someone here in the forum can help you solve this issue.
Click to expand...
Click to collapse
Yeah but you know when you're a frequent flasher and are sure it only takes about 10 percent batter at the most, you don't charge it to the max but I just made a boo boo by not reading the part that said *You must be running a the rom already before flashing the update portion*.. that caused the bootloop..
Thanks a lot though. You're right
Shinare said:
you can make one looks like here:
http://forum.xda-developers.com/showthread.php?t=1403100
if you want to give it a go, will cost you a $3 cable if you mess it up, and will gain you a $300 phone if you do it right.
Click to expand...
Click to collapse
imma try to get these tools.. i definitely have some spare USB cables in my room.. just getting the phone open and stuff is the issue. Not that tech savy lol
You don't need to open your phone
Sent from my Nexus S using XDA
Get phone in to ap fastboot and go down to bp tools and then press vol+.
Phone should reboot in to a sort of recovered state (last firmware that was on phone) and allow you to charge up.
Once 100% retry flashing.
I screwed my phone several times already and thought I wouldnt recover. Through some chat help have always recovered. Same for my Charge after a few times you figure out all the tricks.
You can recover it. I've done it twice
If you check out my post it shows you a alternative and easier way charge your phone again and make it back to stock rom and no root. Then you can sell your phone for a better price or just keep it!
Ill give you $150 for it...
Ill trade you a Samsung Charge for it. Seriously though you should be able to recover.
passion8059 said:
Get phone in to ap fastboot and go down to bp tools and then press vol+.
Phone should reboot in to a sort of recovered state (last firmware that was on phone) and allow you to charge up.
Once 100% retry flashing.
Click to expand...
Click to collapse
It takes me to this message every time. anyone else got this before? see attached
Yup I had that before. Happened to me when rsding to an earlier version and the battery went low before it finished. Gonna have to use a factory cable or replace it.
Sent from my XT912
orcsbane13 said:
Yup I had that before. Happened to me when rsding to an earlier version and the battery went low before it finished. Gonna have to use a factory cable or replace it.
Sent from my XT912
Click to expand...
Click to collapse
what if the whit light is showing after plugging it up to a computer with a different USB?
hmmm i wonder if it's charging???? see attached
stepinmyworld said:
what if the whit light is showing after plugging it up to a computer with a different USB?
hmmm i wonder if it's charging???? see attached
Click to expand...
Click to collapse
nope, left mine like that for 12 hrs and it never charged any. Won't charge unless you can get into recovery and can't get into recovery because webtop is messed up.
Sent from my XT912
I get that on mine when I let it die completely (after cocking up flashing!) ... what I do is connect it to pc...get solid white light..... press up/down/power.....boots to the other screen (cant remember what its called).....gives the option for normal boot......press up to get into normal moto boot logo..... VERY QUICKLY replug to a desktop charger.... Seems to work for me! I really must try reflashing with a clean rom!
There are several ways to recover from bricked because of dead low battery. Im sure there are easier but Im just gonna post a few.
http://www.droidforums.net/forum/droid-labs/146492-how-why-make-your-own-motorola-factory-cable.html
More expensive way for a cable but may want to have for future.
http://shop.teamblackhat.info/
More info
http://forum.xda-developers.com/showthread.php?t=1077414
http://forum.xda-developers.com/showpost.php?p=14832871&postcount=45
Thats all Im going to post for now but I have faith that it can be recovered. Dont sell unless desperate and dont want to deal with it. Send it to me and Ill try to recover and if not I can give you one of my Droid charges while I get it back up.
I've been trying to get my S2 right for awhile and finally traced some of my problems to a bad microusb connector...Anyways.. was in the process of flashing back to stock from cm7 with Odin and the phone hangs on the downloading screen, waited an hour and nothing changed. I know it says to not power off device but there was no way around it. Now the phone is bricked pretty darn good I believe. I can't get it to come on at all. I've tried the 3 button recovery mode, the download mode, and the good ole fashioned power button. One interesting thing is that the phone gets warm to the touch when the battery is installed, like it's trying to process something. Any Ideas what I can do?
Pull the battery and leave it out. Next try to put the phone into download mode by holding either one or both volume buttons while plugging in the USB cable. The PC will provide the power. If this boots to download mode, you can try flashing again from there.
firstly, thanks creepyncrawly for the advice! I've read some of your post and tuts and they've been a big help to me!
I just tried what you said and it's still a no-go. You got any other tricks left in the bag??
Am I the only one who read the title as "blackberry"? God I feel stupid...
killman2659 said:
Am I the only one who read the title as "blackberry"? God I feel stupid...
Click to expand...
Click to collapse
That's what I thought too lol
Sent from Team Pirate
extremeways said:
firstly, thanks creepyncrawly for the advice! I've read some of your post and tuts and they've been a big help to me!
I just tried what you said and it's still a no-go. You got any other tricks left in the bag??
Click to expand...
Click to collapse
Only guess work as to what happened. If there are no signs of life no matter what you do (aside from the phone getting warm) then one guess is that the usb port failed/disconnected during the flash of critical files. However, the stock package does not contain bootloaders, unless you used one from the download repository. So like I said, just guessing.
Anyway, I don't know any thing else to do except jtag repair, and with a bad usb port, that would not be cost effective. If it's under warranty, then go for warranty replacement. As far as I can see, you didn't cause the problem by what you did. It looks to me like it was due to hardware failure.
Already ahead of you I called att for warranty yesterday. I'm thinking the same as you as far as a bad USB port messing my flash up. The phone had been giving me all kinds of fits lately with that and I had that camera buzzing issue as well. Through my searches on this site it seems like the USB ports on our phones are a weak point. lots of people having trouble with them. It looks like the same port other devices use so do any of you know if ours is a cheaper one or is it just the nature of the beast with phones because of all the plugging and unplugging that a phone naturally goes through in it's lifetime?? And what about the camera buzzing? Anyone figure out what exactly causes that? If I had to guess it would be using the LED as a flash light, that's when I noticed it happening.
I'm just thinking ahead to when I get my replacement now and want to change any of my habits with the phone if that will extend the life of it.
On a side note, they offered me a skyrocket, to which I pitched a fit to no avail. I ended up accepting that but with the stipulation that I get a i777 when they are back in stock. I may escalate it to customer relations to see if I can get an s3 out of the deal. Though to be honest I would take an S2 over an S3. I love my S2
I followed a root-guide a couple of weeks ago and my phone worked perfectly.
I have no memory of what ROM I used, nor do I remember if I flashed a Kernel or not. I'm pretty new at this.
Now, today, my phone sent a notification that a new firmware update was available. Stupid as I am I just press "install" right away. Not much later my phone tried to reboot and suddenly was stuck at the Samsung logo screen. I tried pulling out the battery to reboot and it still wouldn't work. If I connected it to my PC it shows a battery but the spinning arrow-thingy is frozen.
After searching these forums and other places I found several guides on how to fix stuff like this, by either flashing with a new kernel - or rom or w/e I don't know - or going into recovery mode and do something funky. The problem is that I can't reach recovery mode at all, and when I enter download mode it's just frozen at "Downloading..." and I can't get it to connect to my PC at all (tried both with and without Kies). In Odin the ID:COM cells won't update when I connect my phone.
Do you guys have any idea how to resolve this? Do I have to take it to a service centre?
Edit: The phone is out of battery, suddenly, apparently, so I tried to charge it, but that doesn't work either. What the **** has happened to my phone? Please help if you can!
zCourge said:
I followed a root-guide a couple of weeks ago and my phone worked perfectly.
I have no memory of what ROM I used, nor do I remember if I flashed a Kernel or not. I'm pretty new at this.
Now, today, my phone sent a notification that a new firmware update was available. Stupid as I am I just press "install" right away. Not much later my phone tried to reboot and suddenly was stuck at the Samsung logo screen. I tried pulling out the battery to reboot and it still wouldn't work. If I connected it to my PC it shows a battery but the spinning arrow-thingy is frozen.
After searching these forums and other places I found several guides on how to fix stuff like this, by either flashing with a new kernel - or rom or w/e I don't know - or going into recovery mode and do something funky. The problem is that I can't reach recovery mode at all, and when I enter download mode it's just frozen at "Downloading..." and I can't get it to connect to my PC at all (tried both with and without Kies). In Odin the ID:COM cells won't update when I connect my phone.
Do you guys have any idea how to resolve this? Do I have to take it to a service centre?
Edit: The phone is out of battery, suddenly, apparently, so I tried to charge it, but that doesn't work either. What the **** has happened to my phone? Please help if you can!
Click to expand...
Click to collapse
*shameful bump*
As I have no chance of replacing this phone (because I'm pretty much broke) I really need to fix this on my own if I can. Last resort is borrowing money to send it to service.
If you have any suggestions or theories PLEASE reply ASAP. I will truly appreciate it.
Thanks in advance
So Atm what does your phone do? Can you get to download mode? Vol-home and power does it go into that?
Buy a new motherboard.And with your memory,why not borrow the money lol.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
I also stupidly pressed one of those "install update" stuff. Then i had the same symptoms until i removed the battery, then it wouldn't turn on - so i suspected hardbrick.
Lucky enough my warranty still had a month letf and they apparently didn't notice that i had rooted my device and thus vioded my warranty.
Are you sure all Kies' background tasks were closed?
Do you have access to a JIG?
There's anotehr way to get into download mode (other than vol down+power+home) i'll see if i can find it.
If it hardbricks maybe you also can make up a story and give it to them? (just a suggestion, nothing i can say but just mentioning since it worked for me)
andrewwright said:
So Atm what does your phone do? Can you get to download mode? Vol-home and power does it go into that?
Click to expand...
Click to collapse
Pretty much nothing. Yes I can get into it, but it says "Downloading... Do not turn off device" or something like that. Recovery Mode is inaccessible.
theunderling said:
Buy a new motherboard.And with your memory,why not borrow the money lol.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
Click to expand...
Click to collapse
And with my memory huh? I'll do this as a last resort.
TheMasterOfToast said:
Are you sure all Kies' background tasks were closed?
Do you have access to a JIG?
There's anotehr way to get into download mode (other than vol down+power+home) i'll see if i can find it.
Click to expand...
Click to collapse
Yep, I even tried with a 100% uninstall and removal of it; still didn't work. No I do not, but I've considered buying one on ebay - they're like $1 with free shipping from China.
TheMasterOfToast said:
I also stupidly pressed one of those "install update" stuff. Then i had the same symptoms until i removed the battery, then it wouldn't turn on - so i suspected hardbrick.
Lucky enough my warranty still had a month letf and they apparently didn't notice that i had rooted my device and thus vioded my warranty.
If it hardbricks maybe you also can make up a story and give it to them? (just a suggestion, nothing i can say but just mentioning since it worked for me)
Click to expand...
Click to collapse
It has most definitely hardbricked. I've considered this: Go down there, act dumb, say after installing the firmware update my phone wouldn't boot and a yellow triangle suddenly appeared out of nowhere, or something like that.
I've only had this phone for half a year so I really wanna fix this if possible!
Thanks a lot for the feedback - please reply with more if you've got some suggestions/recommendations/tips/solutions!
zCourge said:
I followed a root-guide a couple of weeks ago and my phone worked perfectly.
I have no memory of what ROM I used, nor do I remember if I flashed a Kernel or not. I'm pretty new at this.
Now, today, my phone sent a notification that a new firmware update was available. Stupid as I am I just press "install" right away. Not much later my phone tried to reboot and suddenly was stuck at the Samsung logo screen. I tried pulling out the battery to reboot and it still wouldn't work. If I connected it to my PC it shows a battery but the spinning arrow-thingy is frozen.
After searching these forums and other places I found several guides on how to fix stuff like this, by either flashing with a new kernel - or rom or w/e I don't know - or going into recovery mode and do something funky. The problem is that I can't reach recovery mode at all, and when I enter download mode it's just frozen at "Downloading..." and I can't get it to connect to my PC at all (tried both with and without Kies). In Odin the ID:COM cells won't update when I connect my phone.
Do you guys have any idea how to resolve this? Do I have to take it to a service centre?
Edit: The phone is out of battery, suddenly, apparently, so I tried to charge it, but that doesn't work either. What the **** has happened to my phone? Please help if you can!
Click to expand...
Click to collapse
Hey zCourage ,
Maybe you should try another USB jig.... have you tried it yet?
ksjd said:
Hey zCourage ,
Maybe you should try another USB jig.... have you tried it yet?
Click to expand...
Click to collapse
Like just another cable or a "modified jig"? I've tried 3 different USBs and 2 chargers none of them worked. I do not have access to a "modified jig", yet. I will try to order one on eBay
Of course this is a drivers thing, you need your pc to see the device.
We got a couple of threads about that.
Sent from the little guy
gastonw said:
Of course this is a drivers thing, you need your pc to see the device.
We got a couple of threads about that.
Sent from the little guy
Click to expand...
Click to collapse
Come again?
"you need to read about troubleshooting"
Sent from the little guy
gastonw said:
"you need to read about troubleshooting"
Sent from the little guy
Click to expand...
Click to collapse
Elaborate
"You really ought to be less lazy on your ass and search the forums about how to fix your device. Get it now or you want me to draw it for you?"
Sent from...this is not even my S2
"You really ought to be less lazy on your ass and search the forums about how to fix your device. Get it now or you want me to draw it for you?"<br />
<br />
<br />
Sent from...this is not even my S2
Click to expand...
Click to collapse
Better still put one of them many pics you got up.:thumbup: Then I can rob it :thumbup:
gastonw said:
"You really ought to be less lazy on your ass and search the forums about how to fix your device. Get it now or you want me to draw it for you?"
Sent from...this is not even my S2
Click to expand...
Click to collapse
Oh so you don't think I've googled for hours to find solutions for this problem? Think again. Every "solution" i read is either take out the battery, enter recovery mode or use an USB jig. 2 of them don't work and the third is at the moment not possible as I don't have a jig.
No need to be rude.
gastonw said:
Of course this is a drivers thing, you need your pc to see the device.
We got a couple of threads about that.
Sent from the little guy
Click to expand...
Click to collapse
Was I being rude when I posted this?
google i9100 troubleshooting
Sent from the little guy
gastonw said:
Was I being rude when I posted this?
google i9100 troubleshooting
Sent from the little guy
Click to expand...
Click to collapse
You don't think I have? I'm not retarded. The phone is 100% hardbricked.
Buy a new mobo then.
Sent from...this is not even my S2
you need to change your motherboard.
Take it to samsung service center near you and give it to them.
Same thing happened to me and only solution worked is the one that i just told you.