Cyanogenmod 13.0 for N7100
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
- OpenGL (CPU rendering)
- MALI blobs (GPU rendering)
- HWComposer and MALI R3P2 drivers
- Rotation
- Camera
- WiFi
- Bluetooth
- NFC (Android Beam)
- Sensors (ALL!)
- Vibration
- Home Button wake
- RIL
- GPS
- Signal Icon
- Soft Keyboard on first boot
- Mouse pointer
- Pin lock
- External media mounting
Not working
- Some video apps have issues with video playback(You might want to use chrome dev)
DO NOT POST BUG REPORTS WITHOUT LOGCAT OR STEPS TO REPRODUCE BUG
(some bugs also require dmesg and/or (last_)kmsg)
Downloads:mega.nz
RomHut
MD5: c43910241c33dcd3325f46fc4e50179c
gapps:http://opengapps.org/
Install gapps right after rom (dont exit recovery) and dont wipe cache/dalvink/data before going thru gapps setup
Based On Android 6.0.1 marshmallow
Changelog
08.09.2016.
Reverted pegasusq changes
Synced with cm source
Misc
21.08.2016.
Allow flashlight to take wakelocks again
Synced with cm source
20.08.2016.
Chnaged way rotation sensor looks for time (Should fix it hopefully)
Updated Doze implementation
Synced with cm source
10.08.2016.
Synced with cm sources
Enabled doze
improved pegasusq logic
improved video handling
Misc changes check my github
16.07.2016.
Synced with cm source (android-6.0.1_r52)
Updated sensors timing flag (this might solve issues with them)
Updated samsung power hal
reintrodouced AdvancedDisplay (Device settings)
Added gello browser to build process (bassed on chromium project and caf browser)
disabled low latency audio (Should resolve some stuttering issues over bt)
Changed pc hostname haha (Like anybody cares but well it can be seen in kernel version)
12.04.2016.
Synced with cm source
Misc updates
Hey things are kinda sorting out in my life so this might mean i am back,
Sorry but gf was more important than updating rom and still is so yeah
but as long as she is alright i will update and improve rom
03.03.2016
Synced with cm source
Updated power hal
Allowed torch to use wakelocks so it cane be enabled when screen is off
Misc updates
22.01.2016
Synced with cm source
Fixed few CVE-s
misc device tree updates
15.01.2016.
Synced with cm source
Switched to Snap camera app
Updated media codecs
Misc device tree and kernel updates (check github)
06.01.2016.
Synced with cm source
Misc changes
29.12.2015.
Fixed custom vibration values
Misc updates
24.12.2015.
Enabled idev emulation (fixes aosp keyboard issues some users had)
23.12.2015.
Synced with cm source
Sdcard (external media handling) updates (It shouldnt work this way but since everyone is complaining.. here you go)
21.12.2015.
External media can be mounted now(sdcards woo)
SIM pin lock is now working
09.12.2015.
First public release
XDA:DevDB Information
[ROM][6.0.1] Cyanogenmod 13.0 N7100 Build 15, ROM for the Samsung Galaxy Note II
Contributors
Ivan_Meler
Source Code: https://github.com/ivanmeler
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
ROM Firmware Required: XXUFND3 or later baseband
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 12.12.M
Beta Release Date: 2016-09-08
Created 2015-12-10
Last Updated 2016-09-09
Reserved
:good: You ivan, live long and prosper.
YAOUUU.. big thank Ivan
Great job! I was waiting for it. I am gonna test it as soon as possible
Awsome Job Ivan...!
Awesome work Ivan...!:good:
Which version SuperSU to use? 2.61? ...
Yingmu said:
Which version SuperSU to use? 2.61? ...
Click to expand...
Click to collapse
None, Rom comes prerooted you just have to enable root in developer options
Ivan_Meler said:
...
Click to expand...
Click to collapse
You are a hero, hats off :highfive:
Goooooood job Ivan _ Meler .I'll wait for the final.
Where is the donation button? You are the man.
Gesendet von meinem GT-N7100 mit Tapatalk
Oh no Sdcard isnt working. Waiting for next build but its the best rom for n7100. Cheer ?
Sent from my GT-N7100
+1 Best dev of this years
Fisrt look great and work not very well on my phone
I have a crash AOSP keyboard stop woking every 3 secondes.
evilpacer said:
+1 Best dev of this years
Fisrt look great and work not very well on my phone
I have a crash AOSP keyboard stop woking every 3 secondes.
Click to expand...
Click to collapse
Blame gapps
I wouldnt recommand wiping cache/dalvink/data right after installing gapps it will remove some essential permissions from them that will cuase some of gapps to crash its bug in most 6.0.x gapps as of now :/
Ivan_Meler said:
Blame gapps
I wouldnt recommand wiping cache/dalvink/data right after installing gapps it will remove some essential permissions from them that will cuase some of gapps to crash its bug in most 6.0.x gapps as of now :/
Click to expand...
Click to collapse
Thanks, you right.
I install CM13.0 only and AOSP keyboard work well.
Pico Gapps is buggy.
PS: The keyboard bug lock my SIM i need to use my code PUK to unlock it .... :'-(
evilpacer said:
Thanks, you right.
I install CM13.0 only and AOSP keyboard work well.
Pico Gapps is buggy.
PS: The keyboard bug lock my SIM i need to use my code PUK to unlock it .... :'-(
Click to expand...
Click to collapse
Doh will look into it we had same bug in 5.0
tried pico micro mini. keyboard just keeps crashing. open gapps are buggy at this time. Rom is awesome though
---------- Post added at 15:37 ---------- Previous post was at 15:28 ----------
i read in tilak's cm13 google forum about this PUK problem in sim, so i already enquired for it from my carrier and it did ask me PUK code instead of sim pin.
I think you do not a wipe cache and dalvik after rom flash.
I will try and test after sd card fix
Seraphitas said:
I think you do not a wipe cache and dalvik after rom flash.
I will try and test after sd card fix
Click to expand...
Click to collapse
Tried that already. Crashes all over the place. Using OpenGapps Micro.
Does anyone have GApps package that actually does work?
Sent from my GT-N7100 using Tapatalk
SteveDC said:
Tried that already. Crashes all over the place. Using OpenGapps Micro.
Does anyone have GApps package that actually does work?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Just tried slim mini gapps. didnt help. tried with and without wiping cache/dalvik. no luck.
Without installing gapps, the keyboard is working fine.
Related
[ROM][6.0.1] Unofficial CyanogenMod 13 N7105
NOTICE: Support for this ROM has ended, as I can no longer work on this. Take a look at the other Marshmallow ROMs out there.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working
Graphics
RIL
Wifi
Bluetooth
Sensors
Vibration
Camera
Video Playback
NFC
Audio
Doze
GPS
Ambient Display
Not working/Unknown
Camera occasionally stops working. Reboot to fix or download mediaserver killer and run it.
Data occasionally doesn't work after reboot. Turn airplane mode on and off.
Download
Latest build: 11.03.2016
Older builds: Archive
Gapps: Open Gapps
Installation
Read the FAQ to familiarize yourself with any issues that may come up
Make sure you're using the latest TWRP version (3.0.0)
Download the latest build
If using F2FS, read the F2FS section first
Factory reset in TWRP (Very important! Do not skip)
Flash CM13
Flash Gapps
Reboot
Take a look at the post-install steps. They could fix some errors
For updates, it's OK to dirty flash. If you experience any issues however, it is recommended that you clean flash.
Post-install
Make sure YouTube is really working by playing a video
Enable development settings and enable ADB
If you flashed the Stock gapps package, download this and extract it to /system/app
F2FS
F2FS has been enabled. However, you should not use it unless you know what you are doing. I am not responsible for any data loss or damage that occurs. That being said, it should be OK to use.
YOUR EXISTING DATA WILL BE LOST IF FOLLOWING THESE INSTRUCTIONS. BACK IT UP!
Download this for /data and this for /cache
Flash them in TWRP
Reboot to recovery
Follow the rest of the ROM flashing instructions
Changelog
Changelog: -- 11.03.2016
Synced with CM
Back to my custom repos
Experimental incoming calls fix
Doze reenabled
Accelerometer sensor update
New implementation of Ambient Display: You can now wave your hand to A) show notifications or B) turn on the screen to unlock
Latest kernel updates
Changelog: -- 04.03.2016
Synced with CM
Using upstream smdk4412-common and t0lte repo
Latest kernel updates (supposedly fixes the rotation issues)
Changelog: -- 28.02.2016
Synced with CM
SELinux back to permissive (still causing issues in enforcing)
Changelog: -- 16.02.2016
Synced with CM
F2FS support enabled
Changelog: -- 15.02.2016
Moved Snap building to smdk4412-common
Allow flashlight to have wakelock
Downclock more aggressively (better battery life)
Fix Wifi disconnecting when sleeping
Base for F2FS
Changelog: -- 13.02.2016
Experimental Bluetooth patch
Additional SELinux fixes
Changelog: -- 11.02.2016
Synced with CM
SELinux back to permissive (No more bootloops)
Active Display enabled
Additional Doze stuff
Changelog: -- 08.02.2016
Synced with CM
Removed CM12 chroot hack
Switched to CM's method (with a few minor changes)
SELinux is now enforcing
Changelog: -- 05.02.2016
Synced with CM
Latest security release
Applied latest upstream kernel and system/core changes
Changelog: -- 28.01.2016
Synced with CM
Experimental patch for in call volume
Changelog: -- 25.01.2016
Synced with CM
Switch to BFQ
Boot with noop for faster boot
Changelog: -- 24.01.2016
Synced with CM
Switch to Samsung HAL
Add Snap overlay
Changelog: -- 23.01.2016
Synced with CM
Enabled Doze
Changelog: -- 22.01.2016
Synced with CM
Set SELinux to permissive on stock kernel (should fix the bootloop issues)
Update SELinux policies
Apply additional Netflix patch
Allow ADB on stock kernel
Cleaned up radio access families
Changelog: -- 21.01.2016
Synced with CM (fixes the missing QS tiles)
Fix broken camera
Fix YouTube
Changelog: -- 20.01.2016
Synced with CM
Remove camera2
Test fix for Youtube
Fixed kernel
Changelog: -- 19.01.2016
Synced with CM
Added test code to see if it can stop RIL from crashing
Thanks To/Credits
* CyanogenMod team
* p-an (For the original i9305 RIL code)
* ivan_meler (YouTube and Netflix patches)
XDA:DevDB Information
CyanogenMod 13.0 for N7105, ROM for the Samsung Galaxy Note II
Contributors
PoisonNinja
Source Code: https://github.com/PoisonNinja
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2016-03-11
Created 2016-01-20
Last Updated 2016-03-23
Reserved
FAQ:
Root
Enable Developer settings and enable root. You can also flash SuperSU (Beta version) in TWRP, but you'll have to flash it every time you upgrade.
Now on Tap
By default, press and hold the Menu button for Now on Tap. To change it, open Buttons in settings and change the action for the button you want to "Search Assistant"
Wifi Issues
Go to developer settings and turn on "Use Legacy DHCP Client". No longer needed
Reserved
Reporting Bugs
When reporting an issue, please provide the following information:
Device (N7105, i317, 889, etc.)
Build Date (Keep in mind the one in About may not be accurate)
Kernel Build Date
Logcat when the issue occur (http://forum.xda-developers.com/showthread.php?t=1726238)
If it's a random reboot, also provide the following information:
Kernel logs. Run "adb shell su -c cat /proc/last_kmsg > /sdcard/Download/kernel.txt" and grab kernel.txt from the Download folder on your phone
Building CyanogenMod
Follow the instructions https://wiki.cyanogenmod.org/w/Build_for_t0lte until the "Get Prebuilt Apps"
Skip that step and do the next one
Edit roomservice.xml in .repo/local_manifests/ and remove the lines with android_device_samsung_smdk4412-common, android_device_samsung_t0lte, and android_kernel_samsung_smdk4412. It should look like this.
Edit blobs.xml in .repo/local_manifests (create it if it doesn't exist). Edit it so it looks like this.
repo sync --force-sync
Delete any folders if you need to in order to resolve sync errors
Turn on caching
source build/envsetup.sh
brunch t0lte
New build is up.
Build2 is booting up just fine. Will be grabbing all my apps and testing this for the day! Thanks @PoisonNinja!
xxjabberwockxx said:
Build2 is booting up just fine. Will be grabbing all my apps and testing this for the day! Thanks @PoisonNinja!
Click to expand...
Click to collapse
No problem. Remember that Camera won't work. I'll fix it later tonight. Videos also won't work, so if a video tries to play, it will freeze. Just exit the app, and you'll be fine.
Roger that PN...So far, strange thing is that it's not restoring my apps. Poop. Gonna have to download everything manually.
xxjabberwockxx said:
Roger that PN...So far, strange thing is that it's not restoring my apps. Poop. Gonna have to download everything manually.
Click to expand...
Click to collapse
What are you using to restore? Are there any errors? I successfully restored using Titanium Backup.
PoisonNinja said:
What are you using to restore? Are there any errors? I successfully restored using Titanium Backup.
Click to expand...
Click to collapse
oh i was talking about the auto restore google play does... maybe its just the transition from L to M.
New Build
New build is up.
Changes:
Fixed missing QS tiles (CM issue)
Fixed broken camera
Fixed video playback (Not Netflix though)
Synced with latest CM sources
If you want video to work, you MUST factory reset and flash again. Sorry about that.
Also, I'm looking for people to test Netflix for me. I suspect I may need more patches, but I don't have a Netflix account to test.
Downloading and testing. 20160121 right?
gathithow said:
Downloading and testing. 20160121 right?
Click to expand...
Click to collapse
Yup. Be warned, I haven't tested this build with Agni. Flashing it may break YouTube, but I doubt it.
PoisonNinja said:
Yup. Be warned, I haven't tested this build with Agni. Flashing it may break YouTube, but I doubt it.
Click to expand...
Click to collapse
Is necessary flash the boot.img?
gathithow said:
Is necessary flash the boot.img?
Click to expand...
Click to collapse
No. Do not flash the boot.img, as it is from a old build. Link is removed from the main post.
Everything works perfectly ... Thank you for the joy you gave me to have the new version of Android.
diogocpr said:
Everything works perfectly ... Thank you for the joy you gave me to have the new version of Android.
Click to expand...
Click to collapse
No problem.
PS: Agni is confirmed working with the latest build. It doesn't break anything.
I'm unable to boot on the latest build on a i317. I just get a bootloop.
jooprzol said:
I'm unable to boot on the latest build on a i317. I just get a bootloop.
Click to expand...
Click to collapse
Have you clean flashed? Try flashing Agni kernel.
PoisonNinja said:
Have you clean flashed? Try flashing Agni kernel.
Click to expand...
Click to collapse
Yeah, clean flashed. Tried with and without gapps, bootloop both times.
Boots up fine with the Agni kernel.
jooprzol said:
Yeah, clean flashed. Tried with and without gapps, bootloop both times.
Boots up fine with the Agni kernel.
Click to expand...
Click to collapse
Interesting. That should have been fixed with the latest build. Let me know if there's anything else wrong.
Lineage OS is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
[SIZE="2"]* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
[/SIZE]
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts.
LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Install instructions:
Reboot into recovery (latest official TWRP recommended).
Wipe Data, System and Cache if it's a fresh install.
No wipes required if you're updating from a previous version of CM 13.0 (Wipe Cache and Dalvik Cache recommended).
Flash ROM + Gapps.
Reboot.
Read post 2 before reporting bugs.
KitKat is required, before you flash cm13.[/B]
Download links:
ROM: Click Here
Gapps: http://opengapps.org/
Credits :Huge thanks to @aapav01 for bringing up Cm13 fo our device @adityaupreti for new device sources and help
@SoUnd001 for front cam fix
@[email protected] and @Vladi4ik94 for testing and help
XDA:DevDB Information
CM13 for Grand 2, ROM for the Samsung Galaxy Grand 2
Contributors
Shujath
Source Code Common: https://github.com/ms013g-common
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Kitkat
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-05-03
Created 2016-05-03
Last Updated 2016-05-03
Bug reports:[/SIZE][/B]
LineageOS 13 is in development and has several small bugs and missing translations, so in this thread we'll try to focus on device-specific bugs. Complaints/demands/bug reports without logs will be ignored.
Explain how to reproduce the bug and attach logcat and dmesg (if you had a random reboot, also attach last_kmsg). If you don't know how to get those, you can use this app. Please, do not report bugs if you use any kind of mods (like xposed) or third party kernel.
Known bugs:
Buggy Live Display
Buggy GPS but it works
Frequently Asked Questions:
Q) How can I unlock Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) How can I set '3G only' network mode?
A) Open dialer, dial *#*#4636#*#* , open first option "Phone Information", there you can set your preferred network mode.
Q) Why there's a small delay when I wake up the phone?
A) Go to Settings > Display & lights and disable prevent accidental wake-up.
Q) Why is wifi always on in battery stats, even when it was disabled?
A) Go to Settings > Location, press on the 3 dots (top right) > scanning > disable wifi.
Q) How do I update Gapps? (Also useful if you have Gapps related problems).
A) Reboot into recovery. Wipe System, Cache and Dalvik Cache. Install ROM + Gapps. Reboot.
Change Log 13th May:-
Fixed Autorotation bug
Fixed Rear Cam
FIxed Auto Brightness Flickering
Fixed Graphic glitches
Lot more to come
Change Log 19 September:-
Rear cam fix
Added Gello browser
Security patch level updated to September
Updated theme manager with new UI
New optimizing apps view
Upstream Merge
Change Log 19 September 2nd build:-
Fixed GPS
Change Log: 02 OCtober :-
Updated Kernel Configuration
Added Z Cache
Updated Power Profile for better performance
Upsteam Merge
Change 03rd OCtober :-
Updated Kernel Configuration
Updated audio accelerator in kernel
Enabled Zcache and added Zram
Updated battery capacity to 2600mah in the power profile.
Updated Auto Brightness levels from 4 to 10
Autobrightness backlight update
Updated media profiles of the device which was outdated
Added custom power hal to increase battery life
Change 27th Jan :-
Good Bye CyanogenMod
Welcome LineageOS
Applied Front Cam fix by @SoUnd001
Removed Zcache as it was causing Offline Charge bug
No Need to flash multiple files from now, Just flash ROM and Gapps
Thanks bro for CM13 :good::good::good:....this is the ROM I'm waiting for
Please Fix the Credits
The Source which You have mention in the Thread is all mine
Shujath said:
Change Log :-
Fixed Autorotation bug
Fixed Rear Cam
FIxed Auto Brightness Flickering
Fixed Graphic glitches
Lot more to come
Click to expand...
Click to collapse
CM13 getting better day by day ...... Thanks Mr. Shujath :good:
was waiting for this!thanks buddy!
EDIT:link the correct(new)device and vendor tree.
Invalid response from the server: 502
can`t download :/
Igor2906 said:
Invalid response from the server: 502
can`t download :/
Click to expand...
Click to collapse
Some AFH servers are down atm,wait for sometime.
praveensingh569 said:
Thanks bro for CM13 :good::good::good:....this is the ROM I'm waiting for
Click to expand...
Click to collapse
You are welcome
aapav01 said:
Please Fix the Credits
The Source which You have mention in the Thread is all mine
Click to expand...
Click to collapse
Ive used msm common and kernel from Msm8226 and device, vendor from aditya
[email protected] said:
CM13 getting better day by day ...... Thanks Mr. Shujath :good:
Click to expand...
Click to collapse
You are wecome, Enmjoy the ROM
neonkat said:
was waiting for this!thanks buddy!
EDIT:link the correct(new)device and vendor tree.
Click to expand...
Click to collapse
Yup fixed now, thanks
Igor2906 said:
Invalid response from the server: 502
can`t download :/
Click to expand...
Click to collapse
Yes AFH Is down
Bro, i flashed infected kernel but im some momemt my screen become black ,phone rebooted and again black screen i cant do anything with my phone
Flashed again all cm same trouble ,maybe some app doing this?
Igor2906 said:
Bro, i flashed infected kernel but im some momemt my screen become black ,phone rebooted and again black screen i cant do anything with my phone
Flashed again all cm same trouble ,maybe some app doing this?
Click to expand...
Click to collapse
Do a clean install
Sent from my SM-G7102 using XDA-Developers mobile app
anyway
how about pull request fix rotation to msm8226-samsung repo?
to ms01-common
Hi, thanks for your update.
"Go to Settings > Display & lights and disable prevent accidental wake-up."
but i couldn't find "prevent accidental wake-up" option in settings, please help on this
Shujath said:
Ive used msm common and kernel from Msm8226 and device, vendor from aditya
Click to expand...
Click to collapse
Aditya have remove my Commit history there nothing changed in vendor bcoz if he change anything in vendor it may break things like RIL, :good:
faizauthar12 said:
anyway
how about pull request fix rotation to msm8226-samsung repo?
to ms01-common
Click to expand...
Click to collapse
I did
@Shujath after 1day of use, the Rom is very good..Thanks you very much bro.. i found only 2 issues,
- frontCam
- SDcard Name showing 'sdcard1'
grupix said:
do a clean install
sent from my sm-g7102 using xda-developers mobile app
Click to expand...
Click to collapse
\
Вас зрозумів!
igor2906 said:
\
Вас зрозумів!
Click to expand...
Click to collapse
СЛАВА УКРАЇНІ!!!
Good day. I'm really grateful for this ROM. It is nice, but i have an issue. I can't seem to access the internet on my phone, even though i can see the network. But i can access it through mobile hotspot. I don't understand why.
LineageOS for N7100
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is not an official version of the LineageOS ROM for the Note II, I have been maintaining the Note II device sources for quite some time under Paranoid Android when they were supporting Legacy devices. Since PA is no longer supporting legacy devices i decided to base my ROM on CM sources from CM 13.0 (MM 6.0) onward.
Now I present to you the LineageOS ROM based on Android 7.1(Nougat) for the Note II / N7100. This project is still in early stages of development, but I can say that this ROM boots and works and can be used as a Daily driver. Some might not agree but i will leave it to you individuals to make your decision on how you want to use this ROM.
I will do my best to keep the ROM updated most of the time, but at times there might be some delays and that will be primarily because I am busy with my official work that i do for my living and or mostly spending time with my family.
Now lets get to see what works and what does not work. This list is subjected to change in the course of time and i will try to keep it updated.
Working:
- Audio
- OpenGL (CPU rendering)
- MALI blobs (GPU rendering)
- HWComposer and MALI R3P0 drivers
- Brightness Settings
- Ambient Display
- Rotation
- Camera
- WiFi
- Bluetooth
- NFC (Android Beam)
- Sensors (that are working)
- Acceleration Sensor- Light Sensor- Proximity Sensor- Gyroscope Sensor- Pressure Sensor- Sound Sensor- Vibration
- Volume keys
- Home Button wake
- RIL
- GPS - working very well now
- Signal Icon
- Soft Keyboard
- Pin lock
- External SD Card
- Torch
- Video recording
- Video Playback (Gallery and other 3rd party apps)
- Youtube App, Youtube mobile from chrome dev browser only works
- Status Bar Battery customization (working partially)
- PIE
- Accidental Touch
- Pocket Detection
Not working
You tell me if there is any thing that is not working
DO NOT POST BUG REPORTS WITHOUT LOGCAT OR STEPS TO REPRODUCE THE BUG
ROM Download Link
ROM: [url]http://tilak.sergix44.ovh/n7100/[/URL]
ROM: [url]https://www.androidfilehost.com/?w=files&flid=119410[/URL]
Gapps Download Link
Gapps: [url]http://opengapps.org/[/URL]
Changelogs
View LineageOS Gerrit Page: [url]https://review.lineageos.org/[/URL]
NEW INSTALLATION INSTRUCTIONS
- Download the latest build
- Download Gapps
- Take a nandroid backup
- Recommended - Full wipe and factory reset
- Flash ROM using latest TWRP 3.x Recovery
- Flash Gapps
- Reboot.
- Enjoy!
UPDATE INSTRUCTIONS
- Download the latest build
- Take a nandroid backup
- Flash ROM using TWRP 3.x recovery
- Flash Gapps
- Wipe cache
- Wipe dalvik cache
- Reboot
- Enjoy!
Note II G+ Community: [url]https://plus.google.com/communities/112507607742650442080[/URL]
Device Tree: [url]https://github.com/tilaksidduram/android_device_samsung_n7100[/URL]
Kernel Sources: [url]https://github.com/CyanogenMod/android_kernel_samsung_smdk4412[/URL]
XDA:DevDB Information
[ROM][7.1.1] LineageOS for N7100 [Unofficial], ROM for the Samsung Galaxy Note II
Contributors
tilaksidduram
Source Code: [url]https://github.com/lineageos[/URL]
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-10-25
Last Updated 2016-10-25
Reserved
Reserved 1
AWESOME!!!!
GREAT GREAT GREAT! You are the best! Can't wait to try now! Thank you Tilak!
question: rom support ota update? (your ota update...of course!)
Great job tilak @Hibinm
Wow....great rom....
Good...great work.
Rom link is wrong...this is the link :
https://www.androidfilehost.com/?w=files&flid=119410
Superb!
Sent from my GT-N7100 using XDA-Developers mobile app
Nice! Waiting for AOSP
Thank you so much for this ROM. And it's nice to see you here.
Gesendet von meinem GT-N7100 mit Tapatalk
I would love to give it a try. Go devs Go! You're awesome.
Great work
Is this a newer version ?
Or the previous version that you posted on g+
✌
Cocolopes said:
Good...great work.
Rom link is wrong...this is the link :
https://www.androidfilehost.com/?w=files&flid=119410
Click to expand...
Click to collapse
I have updated the download link in the OP. Thanks for catching it.
every time i try to call any number the screen turn of and not able to get it back to turn on > after the call end the screen turn on again > sorry for my bad eng
Yudh said:
Great work
Is this a newer version ?
Or the previous version that you posted on g+
✌
Click to expand...
Click to collapse
You can find the latest update in this link. 10/24 build is the latest one.
https://www.androidfilehost.com/?w=files&flid=119410
refoo said:
every time i try to call any number the screen turn of and not able to get it back to turn on > after the call end the screen turn on again > sorry for my bad eng
Click to expand...
Click to collapse
The reason for this is proximity sensor is not fully working. I am looking into this issue currently.
Hi,
the build is failing with CyanogenMod kernel: http://jenkins.aicp-rom.com/job/android/26501/console
Thank u for hardwork and we proud that still note 2 development is on.
Sent from my SM-G920F using Tapatalk
tilaksidduram said:
The reason for this is proximity sensor is not fully working. I am looking into this issue currently.
Click to expand...
Click to collapse
waiting proximity sensor working fully.wait for next fixed.
Trafalgar Square said:
Hi,
the build is talking with CyanogenMod kernel: http://jenkins.aicp-rom.com/job/android/26501/console
Click to expand...
Click to collapse
what does that means? (apologies for my ignorance)
This is only for SM-P605 (lt03lte)! Even loading an custom recovery will irreversible trigger Knox to 0x1!
LineageOS/CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS/CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (GApps). LineageOS/CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS GitHub repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
How to flash:
-Be sure you are on 5.1.1 Bootloader and Modem (Flash 5.1.1 firmware via Odin) !
-Flash TWRP (version 3.0.0-0 or newer recommended)
-Make Nandroid backup (optional)
-Wipe > Advanced Wipe > select data, system, ART/Dalvik Cache, Cache, Internal Storage > Swipe
-Install > select Lineage14.1 Zip > Swipe, optional: flash GAPPS, SU Addon (before rebooting!)
-Reboot
Please read full OP before posting or flashing anything. Please don't report any bugs, if you use Xposed, any mod or modified the system.
Please report no issues, if you
using the official builds (or others than mine)
flashed Xposed
or modified the system
What is working
Everything
No major issues/bugs
Download
Other Builds
GAPPS
Notes:
- If SIM is not detected/RIL not working, flash 5.1.1 firmware again!
- Enable root: flash SU Addon, Settings > About tablet > tap 5x at build number. Settings > Developer options > Root Access
- just ignore E: Unknown Command errors in TWRP
- Flash GAPPS before reboot first time after flash!
- If using MTP/PTP shows no files, please tap one more at transfer files in notifications
- If something not listed ist not working, please test it also with SELinux permissive (setenforce 0 via Terminal Emulator/ADB Shell or use SELinuxModeChanger)
Changelog:
20210320: Synced sources
20200913: Synced sources, added midi support, disabled 5 GHz AP
20200318: Synced sources
20200124: Synced sources, a few kernel changes
20191101: Synced sources, small changes
20190801: Synced sources, slightly higher volume on speaker and Headset, small changes
20190303: Synced sources,smaller changes
20181226: Synced sources, changed SEPolicy, updated HID driver, small changes
Older
--Lineage--
20181217: Synced sources
20181029: Synced sources, small changes
20180816: Synced sources
20180618: Synced sources (Security Patch Level 2018-05-05), switched to 2048 heap/hwui memory map, sepolicy
20180524: Security Patch Level 2018-05-05
20180424: Synced sources
20180326: Synced sources, small things
20180307: Synced sources, kernel security patches, a few things
20180124: Synced sources, removed libsecril and legacy sd symlink, kernel updates
20171205: Synced sources, RIL changes, implemented stylus gestures
20171026: Synced sources, fixed magnet cover, switched to source built CAF ril, some kernel changes
20170925: Synced sources, fixed camera, kernel updates, sepolicy updates
20170829: Synced sources, switched to msm8974-common kernel (with some changes for our device), CLOCK_BOOTTIME_ALARM support, some smaller changes (Note: Please flash boot.img from post #643 to fix camera!)
20170803: Fixed MpDecision
20170802: Synced sources, only activate button light if they are pressed, added missing low latency record (-->for Skype etc.), updated init and sepolicy, some small improvements and changes
20170723: Synced sources, grant proper unix permissions for netmgrd and rmt_storage, updated sepolicy and init, smaller changes
20170703: Synced sources, removed buggy timekeep (fixes wifi problem), RIL updated (fixes Autotimezone), disabled live display per default, some minor changes
20170626: Synced sources, switched to Sony Timekeep (experimental), added SamsungDoze, enabled sdcardfs, enabled CIFS/NFS, mac access fixed, some kernel changes
20170614: Synced sources (Android 7.1.2_r17), quiet "KERNEL IS NOT SEANDROID ENFORCING"
20170604: Synced sources, fixed a bunch of kernel leaks
20170518: Synced sources, Only expose su when daemon is running
20170507: Synced sources (android-7.1.2_r8, Jelly...), correct keylayout config, enabled volume wake settings, added missing liblight defines, fixed prefered network setting, fixed rotation problem
20170422: Synced sources (Android 7.1.2), F2FS support, changed keylayout again, some kernel changes, IR changes from Lineage, dex preopt (not prerooted, flash SU Addon)
20170320: Synced sources, prerooted again, enabled Miracast/WiDi overlay, added missing SEPolicys for s-pen third party apps
20170301 #2 : Fixed tethering/hotspot (not prerooted, flash SU Addon)
20170301 #1: Synced sources, improved macloader related stuff (not prerooted, flash SU Addon)
20170203: Synces sources, fixed telehony fc after Nandroid restore, enhanced off charging mode
20170126: Synces sources, enabled Blur, a few kernel changes
20170114: Synced sources (Android 7.1.1_r9)
20170104: Synced sources, removed some deprecated stuff (dhcpcd entries, legacy symlinks)
20161231: Synced sources, Bluetooth disabled per default, unknown sources enabled per default
20161227: Synced sources, first Lineage build
--CyanogenMod--
20161215: Synced sources (Android 7.1.1_r6), disable notification LED for now (until I find a better solution), switched to common IR/lights HAL, last build from CyanogenMod Sources
20161207: Synced sources (Android 7.1.1), reduced power consumption, add missing SELinux rule
20161202: Synced sources, fixed magnetic cover, fixed VOIP mic
20161128: Synced sources, fixed off charging Mode, changed keylayout: Menu button: menu, longpressmenu: splitscreen view, doubletaphome: recent Apps
20161115: Synced sources, fixed camcorder, mapped longpressmenu as menu
20161110: Synced sources, Setup Wizard fixed, updated SEPolicy
20163010: first xda release, sync with cm 14.1 sources
Credit: LineageOS/CyanogenMod Team, Maintainer and Valera1978
Kevin F. Haggerty, Paul Keith
Sources:
Device
Kernel
Kernel since 20170829
Vendor
XDA:DevDB Information
Unofficial LineageOS (CyanogenMod) 14.1 for SM-P605, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
davidmueller13
Source Code: http://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 5.1.1 bootloader and modem
Based On: LineageOS
Version Information
Status: Stable
Created 2016-10-30
Last Updated 2020-09-17
FAQ - Frequently Asked Questions
FAQ
Please read before posting anything!
Will this work/can you make it work on P600/P601?
Short answer: No! Only SM-P605 is supported.
But there are other projects for your device. For P600 (n1awifi) you can just download the latest official nightly.
Can you add xy feature?
It is and will stay a build straight from LineageOS sources, not a fork, so no. And also afaik there is no feature request way for LineageOS atm.
My SIM card is not recognized. What can I do?
As RIL blobs are from 5.1.1 firmware package, you need to be on modem from 5.1.1 firmware. The easiest way: just get an firmware package from Sammobile, Updato... and flash it via Odin. If it's still not working after that, do the same again (sometimes this is necessary).
Something is not working (correctly) / I found a bug? What should I do?
Make sure there are no potential courses for that issue like installed Xposed or system modifications. Also look, if it's listed in the OP or somebody already mentioned it. If not, just post about it and all information about it you have (circumstances, steps to reproduce it...).
Of course only for my builds you found in that thread, not for other/offical builds.
Amazing work!
Running your 10-27 build since yesterday night and working great so far on my T-Mobile P-607T.
Only thing noticed so far are that can not change the battery style and display battery % on the statusbar.
That's purely cosmetic, the build is fast and stable. Weather location service works, have not tested GPS
nav yet.
Setup wizard worked for me on the 10-27 build.
Will download and test this build.
Thanks for keep supporting the Note 10.1 2014.
Thanks
Thanks for making this sweet build. Everything works well on my P607-TM except for the fact that it thinks the SIM card is not inserted. I came from a aosp 6.0.1 build and did an advanced format of everything except for external SD card. I tried formatting a few times and reinstalling a few times with no luck.
iandy1 said:
Only thing noticed so far are that can not change the battery style and display battery % on the statusbar..
Click to expand...
Click to collapse
Yes, some stuff for that is not fully ported and implemented yet.
iandy1 said:
Setup wizard worked for me on the 10-27 build.
Click to expand...
Click to collapse
Thats the SetupWizard App, that comes with GAPPS. I had to remove the CyanogenMod SetupWizard, because of a FC while Wifi Setup. (I think, it uses the deprecated SETUP_WIFI_NETWORK.)
temijun said:
except for the fact that it thinks the SIM card is not inserted. I came from a aosp 6.0.1 build and did an advanced format of everything except for external SD card. I tried formatting a few times and reinstalling a few times with no luck.
Click to expand...
Click to collapse
Make sure, you are on the latest modem (e.g. by flashing latest firmware).
Also an LogCat would be useful (How to do this).
Yeah you're absolutely right about the radio firmware once I upgraded baseband from P607TUVUBOI2 to P607TUVSBPH1 and reflash everything works as expected! thanks again for this awesome rom!
davidmueller13 said:
Yes, some stuff for that is not fully ported and implemented yet.
Thats the SetupWizard App, that comes with GAPPS. I had to remove the CyanogenMod SetupWizard, because of a FC while Wifi Setup. (I think, it uses the deprecated SETUP_WIFI_NETWORK.)
Make sure, you are on the latest modem (e.g. by flashing latest firmware).
Also an LogCat would be useful (How to do this).
Click to expand...
Click to collapse
firmware is very smooth, but
- Sometimes crash settings app
- Does not work the microphone during a call through Skype
Does this version fix the bug that I saw with rotation?
Edit. Isn't a bug. Settings disabled rotation for certain orientation by default. Need fix by changing in settings.
it cant read my sim
Does it support exfat or ntfs file system with write rights?
great rom..sometimes a little bit stuttering, but finally great to have 7.1
how do you use your stylus? do u have a special app for that?
Thank you again
ameenkhaled said:
it cant read my sim
Click to expand...
Click to collapse
I flashed back to the default TMobile P607TUVUBOI2 firmware and then did an internal update to P607TUVSBPH1 which updated the radio baseband. This solved the missing SIM issue for me.
Hooray! One more of my devices could hop on CM14.x! I think imma start building myself starting next month...
Are MTP and ADB connections working too? Those aren't present in official CM13 nightlies and are the most irritating I found in them.
Sent from Google Nexus 6P @ CM13
AndyYan said:
Are MTP and ADB connections working too? Those aren't present in official CM13 nightlies and are the most irritating I found in them.
Click to expand...
Click to collapse
Yes, they work.
In the CM13 Nighlys the kernel driver for MTP is failing. If you want to fix/add some things to your CM13 Builds:
Fix camera failing while SELinux Enforcing: http://review.cyanogenmod.org/#/c/165576/
Fix MTP-driver: https://github.com/davidmueller13/k...mmit/4785cabeb9047e8d9e5e19e3f3f5c4f4e3a59ceb
enable adoptable storage: https://github.com/davidmueller13/d...mmit/5ed5e71080c366e3e35ee23f032b86da74db2dba
And if you want to build CM14, it's important that you know that i use the common graphic binaries:
https://github.com/TheMuppets/proprietary_vendor_qcom_binaries
temijun said:
I flashed back to the default TMobile P607TUVUBOI2 firmware and then did an internal update to P607TUVSBPH1 which updated the radio baseband. This solved the missing SIM issue for me.
Click to expand...
Click to collapse
Does PH1 update the baseband? I extracted modem.bin from PH1 tar and flashed, and later flashed the whole PH1 package from Odin, but baseband stays at OI2...
Sent from Google Nexus 6P @ CM13
---------- Post added at 05:38 PM ---------- Previous post was at 05:37 PM ----------
davidmueller13 said:
Yes, they work.
In the CM13 Nighlys the kernel driver for MTP is failing. If you want to fix/add some things to your CM13 Builds:
Fix camera failing while SELinux Enforcing: http://review.cyanogenmod.org/#/c/165576/
Fix MTP-driver: https://github.com/davidmueller13/k...mmit/4785cabeb9047e8d9e5e19e3f3f5c4f4e3a59ceb
enable adoptable storage: https://github.com/davidmueller13/d...mmit/5ed5e71080c366e3e35ee23f032b86da74db2dba
And if you want to build CM14, it's important that you know that i use the common graphic binaries:
https://github.com/TheMuppets/proprietary_vendor_qcom_binaries
Click to expand...
Click to collapse
Do the patches works for TWRP too? Last I recalled TWRP also doesn't have ADB/MTP, if those could fix it I might consider syncing TWRP and do a patched build...
Sent from Google Nexus 6P @ CM13
AndyYan said:
Do the patches works for TWRP too? Last I recalled TWRP also doesn't have ADB/MTP, if those could fix it I might consider syncing TWRP and do a patched build...
Click to expand...
Click to collapse
I think, it's the same issue. If you want to build TWRP you should use a OmniROM source tree (i change the device tree for that a bit :https://github.com/davidmueller13/device_lt03lte_nougat/tree/omni ).
Is it common that the menu button calls up the recent apps?
I tried editing it in options but no matter if short press or long press are changed to any option available it still uses recent apps.
Cirno5 said:
Is it common that the menu button calls up the recent apps?
I tried editing it in options but no matter if short press or long press are changed to any option available it still uses recent apps.
Click to expand...
Click to collapse
Yes, that is normal. I don't know how to fix it myself without gravitybox. That option won't work because 7.0/7.1 has no xposed support yet.
Sent from my LG-H850 using XDA-Developers mobile app
Cirno5 said:
Is it common that the menu button calls up the recent apps?
I tried editing it in options but no matter if short press or long press are changed to any option available it still uses recent apps.
Click to expand...
Click to collapse
Manually edit the .kl file in /system/usr/keylayout (can't remember which, but should be obvious).
Sent from Google Nexus 6P @ CM13
Cirno5 said:
I tried editing it in options but no matter if short press or long press are changed to any option available it still uses recent apps.
Click to expand...
Click to collapse
Change in sec_touchscreen.kl in system/usr/keylayout "APP_SWITCH VIRTUAL" to "MENU VIRTUAL".
I think, i will change it in the next build and set the app switch to "long press home" and disable "double tap home".
Good news for camcorder: I fixed recording, but we have to wait for some changes in CM14.1. But at least it works for our device finally in CM13.
[ROM][7.1.2][T0LTE/T0LTEKOR]Unofficial LineageOS 14.1 by Exynos4 Team
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What is Exynos4 Team?
The Exynos4 team is composed of the current T0LTE/T0LTEKOR maintainers for both LineageOS and Resurrection Remix. (@Option58, @kozmo21 and @PoisonNinja)
What are the differences between official/unofficial builds?
These are more like the bleeding edge builds. Upcoming changes/fixes will show up here first, and then they might (or might not) eventually make it into Lineage official. So, if you want the latest and greatest changes for the Note 2, flash this instead of official. While we try to guarantee stability, these builds will be less stable than official builds.
Due to LineageOS rules, if you are switching between official and unofficial builds you will have to clean flash.
We'd like to say thanks to:
The great developer community out there. We've had a lot of help from other people.
- the LineageOS team
- the Galaxy S3 LineageOS maintainer github.com/fourkbomb.
- the NamelessROM project github.com/namelessrom.
- xda users for testing and bug reports.
Working
Graphics
Wifi
Data
RIL
Bluetooth
GPS
Sensors
Vibration
Camera
NFC
Audio
Video Playback
Not working/Bugs/Unknown
Data doesn't work until after first boot.
Bluetooth audio (may or may not work for you)
MTP crashes when uninstalling an app
Installation
Read the FAQ to familiarize yourself with any issues that may come up
Make sure you're using the latest TWRP version (3.1.1)
Download the latest build for your variant. MAKE SURE YOU DOWNLOAD THE CORRECT VARIANT! See below to find out which download to use.
Copy it to the phone, preferably on internal storage
Factory reset in TWRP (Very important! Do not skip)
Flash unofficial LineageOS 14.1
Flash Gapps
Optional: Flash root package
Reboot
Be patient. The first boot will take between 5 - 15 minutes.
Set up everything and reboot again to get radio working
See the FAQ to avoid common issues
For updates, it's OK to dirty flash. If you experience any issues however, it is recommended that you clean flash.
Supported Variants
t0lte
GT-N7105 (GSM LTE)
SGH-i317 (AT&T)
SGH-i317M (Canada)
SGH-T889 (T-Mobile)
t0ltekor
SHV-E250S (SK Telecom)
SHV-E250K (Korea Telecom)
SHV-E250L (LG U+)
Download
Taken down. Please switch to the official builds.
Changelog
6/29/2017 (t0lte) and 6/29/2017 (t0ltekor)
Sync with the latest Lineage sources
Switch SELinux back to enforcing
6/27/2017 (t0lte) and (t0ltekor)
Sync with the latest Lineage sources
Certain RIL and modem fixes
6/21/2017 (t0lte) and 6/21/2017 (t0ltekor)
Sync with the latest Lineage sources
6/14/2017 (t0lte) and 6/14/2017 (t0ltekor)
Sync with the latest Lineage sources
Hardware composer fixes
6/13/2017 (t0lte) and (t0ltekor)
Sync with the latest Lineage sources
Revert 'Updated RIL class from hlte'
[*] Switch back to proprietary RIL blobs
Properly fixed screencast
Lots of security patches in the kernel
Temporarily switched SELinux to permissive
6/04/2017 (t0lte) and 6/05/2017 (t0ltekor)
Added workingHWComposer
Imported modem files from AGNi kernel
Updated RIL class from hlte
Added SamsungDoze service (better Ambient Display)
Added temporary screencast fix
XDA:DevDB Information
LineageOS 14.1 by Exynos4 Team, ROM for the Samsung Galaxy Note II
Contributors
PoisonNinja, Option58, kozmo21, LineageOS team
Source Code: https://github.com/Exynos4
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Beta
Created 2017-06-04
Last Updated 2017-07-15
Reserved
Reserved
OK
Downloading
Sent from my T-Mobile Samsung Galaxy Note II using XDA Labs
Waiting for LTE kor
Full wipe only or status 7
Fyi
Can't wait :3 so i gonna flash t0lte vesion on t0ltekor
Everything seem be OK :3
I got some graphic problem with YouTube app and wallpaper , but when I take a screen shot, them seem to be OK in screen [email protected]@
qwebnm2000 said:
Waiting for LTE kor
Click to expand...
Click to collapse
The Exynos4 team is pleased to announce the first release for t0ltekor. Links can be found in the original post, or click here for the build.
Functionality wise, the features are identical to t0lte. Yes, t0ltekor says 05/05/2017 while t0lte is 05/04/2017, but that is because t0ltekor was built after t0lte.
Rebooted a few times
Locked
Back on latest official
br54 said:
Rebooted a few times
Locked
Back on latest official
Click to expand...
Click to collapse
Use for 3 hours without any problem :3
Reboot a few times. Hope it works for you
Downloading....
Thanks Exynos4 Team's contribution!
btw, I am not sure about that: is it the Changelog consist of a typo in month digit?
Code:
5/04/2017 (t0lte) and 5/05/2017 (t0ltekor)
qwebnm2000 said:
I got some graphic problem with YouTube app and wallpaper , but when I take a screen shot, them seem to be OK in screen [email protected]@
Click to expand...
Click to collapse
That's because Hardware Composer is still work in progress and might have certain gliches.
Settings -> Developer Settings -> Disable Hardware Overlays
Can you add hardware button disable and navigation bar enable option?
zeratull said:
Can you add hardware button disable and navigation bar enable option?
Click to expand...
Click to collapse
Maybe in the future.
Option58 said:
That's because Hardware Composer is still work in progress and might have certain gliches.
Settings -> Developer Settings -> Disable Hardware Overlays
Click to expand...
Click to collapse
I got it
One more thing :3 ui very lag when live display switch to night mode
t0lte_n7105_user said:
Downloading....
Thanks Exynos4 Team's contribution!
btw, I am not sure about that: is it the Changelog consist of a typo in month digit?
Code:
5/04/2017 (t0lte) and 5/05/2017 (t0ltekor)
Click to expand...
Click to collapse
My bad, fixed. Thanks for the heads up :good:
:3 can't believe my note 2 is 4.5 years old but still can run asphalt 8 smoothly with medium graphic on android 7.1 :3