Hi, for those interested I wrote following steps (ubuntu 10.10 32b):
(based on excellent http://android-dls.com/wiki/index.php?title=HOWTO:_Unpack,_Edit,_and_Re-Pack_Boot_Images )
I included compiled tools mkbootfs , mkbootimg and perl scripts unpack-bootimg.pl and repack-bootimg.pl.
Repack-bootimg.pl is edited and the needed parameters for our folio are included ([email protected] [email protected] vmalloc=192M video=tegrafb console=ttyS0,115200n8 usbcore.old_scheme_first=1 tegraboot=sdmmc tegrapart=recovery:122000:a00:800,linux:a0e00:1000:800,loader:300:400:800,mbr:700:200:800,system:900:20000:800,cache:20900:80000:800,misc:a0900:400:800,userdata:a1f00:80000:800 boardtype=PR)
1) unpack attachement mytools.tgz into your home, in your home the folder ~/mytools is created:
tar -xzf mytools.tgz
2) copy existing boot.img into ~/mytools (from foliomod update.zip)
3) ./unpack-bootimg.pl boot.img
- old kernel from boot.img is extracted: boot.img-kernel.gz
- content of contained ramdisk is extracted in folder: boot-img.ramdisk
4) copy new compiled kernel (zImage) into ~/mytools (from <source>/kernel/arch/arm/boot/zImage , you have to compile yourself with the weeds2000 quide http://forum.xda-developers.com/showthread.php?p=10331797#post10331797)
5) make all desired changes into ramdisk folder
6) repack new boot.img with a new kernel and changed ramdisk
./repack-bootimg.pl zImage boot.img-ramdisk boot-new.img
7) new boot image is created as boot-new.img
8) if you want just to experiment, you can take any full foliomod dexter's update.zip (1.3d), put the new boot image inside instead original one.
It is possible to remove the other 2 images (recovery and system) if you want just to flash kernel. NOTE! But you have to remove the extrating command for recovery and system from update.zip/meta-inf/com/google/android/update-script.
p.s. Feel free to correct me, if something wrong with the steps. It's my first attempt to compile kernel
I am on FolioMod 1.3d and I use the kernel built without patches from http://tegramid.com/wiki/Main_Page(Full GPL source bundle including framework) for a day without problems. I had to do a full wipe. It's meant for testing, I don't say that kernel from source is better or worse.
Many thanks to Dexter because everything is based on his release, weeds2000 because of his kernel compile quide and tsh who placed the sources on the git and to all who try hacking our folio
thx for this, that 'll be usefull
thanks for the guide.
i have managed to do every thing up to the repack
when i type
Code:
perl repack-bootimg.pl boot.img-kernel.gz boot.img-ramdisk.gz boot.img
i get error
Code:
boot.img-ramdisk.gz Not a directory at repack-bootimg.pl line 13.
even though it is definatly in their. any idea how to get it to work?
You don't have to provide the folder instead of the packed Ramdisk-File!
Because this script is made doing changes in Ramdisk and kernel..
So you can change the scripts inside the boot.img-ramdisk folder and the script will repack and add it to the new boot.img!
permission denied
i have done everything as you said, but while using split_bootimg.pl i got "permission denied". please suggest me what to do?
1. Enable read/write permissions for that file.
2. Tobr, you made a mistake in repack-bootimg.pl. You forgot to add " ./ " before mkbootimg.
Jon2555 said:
1. Enable read/write permissions for that file.
2. Tobr, you made a mistake in repack-bootimg.pl. You forgot to add " ./ " before mkbootimg.
Click to expand...
Click to collapse
The script was downloaded from internet not written by me. And it worked for me just fine. I can not verify now that you are right (probably you are). If it works for you with ./ then either I can put fixed version for download for others (if there is anybody) or it can be here just as a notice for other users, if not working.
I have ./ defined in my path variable in my profile so that i don't need it.
eror when repack
tobr said:
Hi, for those interested I wrote following steps (ubuntu 10.10 32b):
(based on excellent http://android-dls.com/wiki/index.php?title=HOWTO:_Unpack,_Edit,_and_Re-Pack_Boot_Images )
I included compiled tools mkbootfs , mkbootimg and perl scripts unpack-bootimg.pl and repack-bootimg.pl.
Repack-bootimg.pl is edited and the needed parameters for our folio are included ([email protected] [email protected] vmalloc=192M video=tegrafb console=ttyS0,115200n8 usbcore.old_scheme_first=1 tegraboot=sdmmc tegrapart=recovery:122000:a00:800,linux:a0e00:1000:800,loader:300:400:800,mbr:700:200:800,system:900:20000:800,cache:20900:80000:800,misc:a0900:400:800,userdata:a1f00:80000:800 boardtype=PR)
1) unpack attachement mytools.tgz into your home, in your home the folder ~/mytools is created:
tar -xzf mytools.tgz
2) copy existing boot.img into ~/mytools (from foliomod update.zip)
3) ./unpack-bootimg.pl boot.img
- old kernel from boot.img is extracted: boot.img-kernel.gz
- content of contained ramdisk is extracted in folder: boot-img.ramdisk
4) copy new compiled kernel (zImage) into ~/mytools (from <source>/kernel/arch/arm/boot/zImage , you have to compile yourself with the weeds2000 quide http://forum.xda-developers.com/showthread.php?p=10331797#post10331797)
5) make all desired changes into ramdisk folder
6) repack new boot.img with a new kernel and changed ramdisk
./repack-bootimg.pl zImage boot.img-ramdisk boot-new.img
7) new boot image is created as boot-new.img
8) if you want just to experiment, you can take any full foliomod dexter's update.zip (1.3d), put the new boot image inside instead original one.
It is possible to remove the other 2 images (recovery and system) if you want just to flash kernel. NOTE! But you have to remove the extrating command for recovery and system from update.zip/meta-inf/com/google/android/update-script.
p.s. Feel free to correct me, if something wrong with the steps. It's my first attempt to compile kernel
I am on FolioMod 1.3d and I use the kernel built without patches from http://tegramid.com/wiki/Main_Page(Full GPL source bundle including framework) for a day without problems. I had to do a full wipe. It's meant for testing, I don't say that kernel from source is better or worse.
Many thanks to Dexter because everything is based on his release, weeds2000 because of his kernel compile quide and tsh who placed the sources on the git and to all who try hacking our folio
Click to expand...
Click to collapse
hi
when do this in ubuntu 11.4
get eorr below
[email protected]:~/Desktop/untitled folder$ ./unpack-bootimg.pl boot.img
kernel written to boot.img-kernel.gz
ramdisk written to boot.img-ramdisk.cpio.gz
463 blocks
extracted ramdisk contents to directory boot.img-ramdisk/
[email protected]:~/Desktop/untitled folder$ ./repack-bootimg.pl zImage boot.img-ramdisk boot-new.img
gzip: folder/ramdisk-repack.cpio.gz: No such file or directory
sh: mkbootimg: not found
No such file or directory at ./repack-bootimg.pl line 21.
[email protected]:~/Desktop/untitled folder
can any one help me?
any tools for windows ?
nguyenhonganh said:
any tools for windows ?
Click to expand...
Click to collapse
Same request!
repack problem
Can somebody tell me is it possible to repack kernel and ramdisk using just hex editor? Without this scripts and unmkbootimg and mkbootimg. What does not work for me cos im using i9100 Philz root. I know how to unpack it and change init.rc and pack it back again. So can i just put my (kernel+ramdisk) ramdisk.cpio.gz file inside mmcblk0p5 in exac location. Will that work out? I dont know what this is doing:
mkbootimg --kernel zImage --ramdisk initramfs.cpio.gz --base 0x20000000
--cmdline 'no_console_suspend=1' -o new_boot.img
this address thing and cmdline but if i replace just ramdisk i dont need to set up addres again cos everything will be in same place. And one more question if something goes wrong can i boot to recovery or download mode?
New kernel copied itself to mmcblk0p5
and i have new CWM now. So it seems to me recovery is inside mmcblk0p5 as well and my phone never use mmcblk0p6
@tobr, I cannot open the archive of boot.img-kernel.gz. When I try to open it with terminal, it says: Not a valid gzip file. What to do?
i have read the article http://forum.xda-developers.com/showthread.php?t=915808
i am a windows user,and i have install cgwin and perl
but i can not use unpack.boot.pl and repack.boot.pl(actually i donot know how to use it )
i unpack the boot.img by split_bootimg.pl by DOS
if anyboy can tell me how to use unpack-bootimg.pl and repack-bootimg.pl?
or help me repack the boot.img.the edited file of the boot.img i have upload to
http://cid-34cb0dc592eb3181.office.live.com/browse.aspx/.Public?uc=1
thanks
any body there?
Use dsixda android kitchen.
I run linux, but you have a perl script, so you need to run it through perl before it can work. So something like...
Code:
perl unpack.boot.pl [then the inputs for unpack.boot.pl]
I use cramfs tools so mine looks like
Code:
cramfsck -x bootextractedDIR boot.img
You can also get the dsixda android kitchen and dig through the files, since it does it too. The kitch is just a really complated cmd script, so somewhere in there you can find the command for how it extracts the boot.img
equalsP said:
I run linux, but you have a perl script, so you need to run it through perl before it can work. So something like...
Code:
perl unpack.boot.pl [then the inputs for unpack.boot.pl]
I use cramfs tools so mine looks like
Code:
cramfsck -x bootextractedDIR boot.img
You can also get the dsixda android kitchen and dig through the files, since it does it too. The kitch is just a really complated cmd script, so somewhere in there you can find the command for how it extracts the boot.img
Click to expand...
Click to collapse
But it can't pack it after unpacking: (
Need it to add kernel to bootimage. Can someone help ?
Sent from my HTC HD2 using XDA Premium App
Hello I've found this...
http://android-dls.com/wiki/index.php?title=HOWTO:_Unpack,_Edit,_and_Re-Pack_Boot_Images
I could unpack the files. but mkbootfs and mkbootimg doesn't work for me. When I downloaded ROM kitchen, there files were present as mkbootfs.c and mkbootimg.c .Not sure how to make them executable
Tried compiling with gcc and also tried changing permissions using chmod. If you find anythng, please PM me...
Edit : Forgot to mention I run linux.
Okay now sorted it. Use repack_bootimg.pl tool .Download ROM kitchen and search for mkbootimg and mkbootfs tools. Copy and paste them to your working directory. Also copy all header files from dsidia ROM kitchen. Download Repack tool from web.
Use this command
perl repack-bootimg.pl <kernel> ramdisk directory.img
very happy to hear this.i will switch to my ubuntu and try again
Not work here. I have image boot from rk2918 device and pearl scripts not work for unpack.
How I can unpack?
I tried with the unyaffs tool. I set it up and when I actually try to unyaffs, I get this: "Segmentation fault (core dumped)"
I want to unyaffs a stock android system.img. More specifically the Galaxy nexus IMM76I system.img.
EDIT: This can be closed. I downloaded and set up dxsida's kitchen.
Hi
I want to add to my custom ROM a new group id, which I have defined in the file "android_filesystem_config.h".
In general, this file will be included by the android source code, unfortunately my custom ROM has it also built in it sources and I don't have access to this header file.
Then I saw, that android kitchen has in its folder tools/mkboot the file "android_filesystem_config.h". How is this config file used by the kitchen, has it any influence on building the boot.img in the tool or not?
I tried to build a boot.img by running
Code:
mkbootimg --kernel zImage --initrd.gz -o boot.img
, but the modified android_filesystem_config.h did not have any influence. What is the tool mkbootfs for?
Is it even possible to patch a boot.img whit new gid information or do I have to rebuild a whole ASOP?
Thanks and regards
cloooned
hello
i want to create custom boot image.i am using cygwin bash shell and android kitchen.
i extract boot.img with Android Kitchen 0.194 Tools for boot images <unpack/re-pack/etc.>
it show like this
Working folder found
Kernal found at offset 2048 in boot.img
Making folder BOOT-EXTRACTED ....
Extracting kernal ...
Extracting ramdisk ...
Error : NO ramdisk folder found!
Press Enter to counting
How i solve Error:NO ramdisk folder found.
Are you have trouble extracting from the phone or extracting the .img file into something editable? I see at the top of the first page here that there is an update to the Kitchen. Maybe the newer version supports your phone better?