My Galaxy s6 shows model SM G920F in about device But in download mode it shows SM G920P. 3g is also not working. Which firmware should I download ?
tahseentanweer said:
My Galaxy s6 shows model SM G920F in about device But in download mode it shows SM G920P. 3g is also not working. Which firmware should I download ?
Click to expand...
Click to collapse
I would say download the Sprint firmware, P
Where do you live? Maybe it was flashed so it should work in Malaysia.
I am in Pakistan. Will 3g work after downloading g920p firmware ?
tahseentanweer said:
I am in Pakistan. Will 3g work after downloading g920p firmware ?
Click to expand...
Click to collapse
Ummm if you have now F so i guess you should flash F to be on the safe side....
actually dont know much about mobiles , so what do you mean by flash the g920f version. because it is already installed and 3g is not working.
Related
Hello friends!! ..
I wanna flash my Galaxy s 2's firmware , and i can't find the original firmware files.. where can i get them? Isn't there any thread here in s2 section where all stock firmwares are listed in one place? like dr ketan did in Galaxy Note section.. Help me asap..
safijunaid said:
Hello friends!! ..
I wanna flash my Galaxy s 2's firmware , and i can't find the original firmware files.. where can i get them? Isn't there any thread here in s2 section where all stock firmwares are listed in one place? like dr ketan did in Galaxy Note section.. Help me asap..
Click to expand...
Click to collapse
Visit www.sammobile.com/firmware/, download the original firmware for your country.
Thanks
Jokesy said:
Visit www.sammobile.com/firmware/, download the original firmware for your country.
Click to expand...
Click to collapse
Thanks for the link.. I've flashed the 4.0.3 firmware for my country i.e India .. But the problem still exists... My wifi is not starting at all.. whenever i click it by taking notification bar down , it doesnt start at all.. any possible solutions? :'(
safijunaid said:
Thanks for the link.. I've flashed the 4.0.3 firmware for my country i.e India .. But the problem still exists... My wifi is not starting at all.. whenever i click it by taking notification bar down , it doesnt start at all.. any possible solutions? :'(
Click to expand...
Click to collapse
perform a Factory Data Reset
Hi guys I'm using now NobleRom 5.1.1.My phones variants 925i KSA model.How to update 6.0.1 ? Please help thank you.
xxsukruxx said:
Hi guys I'm using now NobleRom 5.1.1.My phones variants 925i KSA model.How to update 6.0.1 ? Please help thank you.
Click to expand...
Click to collapse
You can download the Indian version for G925i from here in Sammobile.
Install with Odin ver. 3.10, if you don't know how to, Google it.
marcelotorres said:
You can download the Indian version for G925i from here in Sammobile.
Install with Odin ver. 3.10, if you don't know how to, Google it.
Click to expand...
Click to collapse
Then do an update through the option in phone and it will download MM for you. I have a G925I and thats how I got MM on my phone in Australia.
EDIT: forgot it is now released (sorry had a late night)
hello
i need g925f rom for g925P sprint
i flashed g925f rom but after flash baseband unkown ??
kindly help
That's so stupid every guide says don't flash different versions of firmware onto different phones. Loads of firmware on samfirmware you can use.
lynxblaine said:
That's so stupid every guide says don't flash different versions of firmware onto different phones. Loads of firmware on samfirmware you can use.
Click to expand...
Click to collapse
ok 1st thanks for your reply ,
but i,m talking about custom roms bro, i need V to F
Cant flash a F rom onto a P unless you want things to not work. It doesn't work that way.
whether custom or stock.
lynxblaine said:
Cant flash a F rom onto a P unless you want things to not work. It doesn't work that way.
whether custom or stock.
Click to expand...
Click to collapse
ok brother thanks , can you see this video ? who,s this guys and how he,s do that ! even he,s change the modem
see this just for your info hope its also help full for you in future
https://www.youtube.com/watch?v=sIJv2gMygbI&t=2s
Hi, new here with a little knowledge
Want to downgrade from 7.0 to 6.0.1 and believe I can do this using Odin, and have a version of 6.0.1 from sammobile.com.
my first attempt failed as sw check failed - device 5, binary 4.
So have downloaded a version binary 5 of 6.0.1 but this is BTU sw not the VOD version that's currently on the device.
I am a Voda UK customer with a locked device - can I load the BTU version on my device or does anyone know where I can find a binary v5 of the VOD 6.0.1 firmware?
thanks in advance.
tshw said:
Hi, new here with a little knowledge
Want to downgrade from 7.0 to 6.0.1 and believe I can do this using Odin, and have a version of 6.0.1 from sammobile.com.
my first attempt failed as sw check failed - device 5, binary 4.
So have downloaded a version binary 5 of 6.0.1 but this is BTU sw not the VOD version that's currently on the device.
I am a Voda UK customer with a locked device - can I load the BTU version on my device or does anyone know where I can find a binary v5 of the VOD 6.0.1 firmware?
thanks in advance.
Click to expand...
Click to collapse
You can flash BTU on to your device, however there's a chance Wi-Fi calling and voLTE will not work.
However the bad news... You can't downgrade once the bootloader has been updated. If you try it will fail, most likely at sboot.bin
callumbr1 said:
You can flash BTU on to your device, however there's a chance Wi-Fi calling and voLTE will not work.
However the bad news... You can't downgrade once the bootloader has been updated. If you try it will fail, most likely at sboot.bin
Click to expand...
Click to collapse
Thank you, I have a binary 5 version of 6.0.1 - will I need to wipe partition if I install btu?
tshw said:
Thank you, I have a binary 5 version of 6.0.1 - will I need to wipe partition if I install btu?
Click to expand...
Click to collapse
Nope you can just flash BTU mate. Thanks the posts
Will do, thank you, will it sorry if I have v
callumbr1 said:
Nope you can just flash BTU mate. Thanks the posts
Click to expand...
Click to collapse
Will do thank you, if I have vod installed from factory will btu overwrite vod.
tshw said:
Will do thank you, if I have vod installed from factory will btu overwrite vod.
Click to expand...
Click to collapse
Yeah it will. VOD and BTU are just the csc codes. BTU is UK unbranded.
callumbr1 said:
Yeah it will. VOD and BTU are just the csc codes. BTU is UK unbranded.
Click to expand...
Click to collapse
Help! It seems to have succeeded but now get stuck on the flashy samsung screen and the vibrates every now and then and stays flashing - how can I fix??
tshw said:
Help! It seems to have succeeded but now get stuck on the flashy samsung screen and the vibrates every now and then and stays flashing - how can I fix??
Click to expand...
Click to collapse
Did you flash a nougat firmware??
Is it on the powered by android screen or samsung logo?
callumbr1 said:
Did you flash a nougat firmware??
Is it on the powered by android screen or samsung logo?
Click to expand...
Click to collapse
back to 6.0.1 BTU from 7.0 VOD and stuck on Samsung with blue light at the top - have done a wipe cache and factory reset from boot menu and now sat on Samsung logo and blue light
tshw said:
back to 6.0.1 BTU from 7.0 VOD and stuck on Samsung with blue light at the top - have done a wipe cache and factory reset from boot menu and now sat on Samsung logo and blue light
Click to expand...
Click to collapse
Leave it like that for 10-20 minutes. It can take a while to boot up first time.
callumbr1 said:
Leave it like that for 10-20 minutes. It can take a while to boot up first time.
Click to expand...
Click to collapse
Thank you, i left it and it worked and back to 6.0.1 - hopefully the software update its downloading isn't 7.0.
Thanks for your help.
tshw said:
Thank you, i left it and it worked and back to 6.0.1 - hopefully the software update its downloading isn't 7.0.
Thanks for your help.
Click to expand...
Click to collapse
It most likely will be a 7.0 update. Just keep declining it. Don't install it. Turn off auto update. Set it to manual. Thank my posts that helped please with the thanks button ?
one last question - yes it is the 7.0 - so have said later to the install - is there any way i can delete the install files?
tshw said:
one last question - yes it is the 7.0 - so have said later to the install - is there any way i can delete the install files?
Click to expand...
Click to collapse
Im not too sure to be honest. I would say you will need root as the files will most likely be saved in /system
Is this even possible seen loads of guides online saying download 6.0.1 and Odin then flash but if the boot loader is for 7.0 it will fail can I 6.0 boot loader be flashed via Odin ? Anyone got a working guide my s6 edge keeps rebooting when it wants to on 7.0 need to get back to 6.0.1?
jutley said:
Is this even possible seen loads of guides online saying download 6.0.1 and Odin then flash but if the boot loader is for 7.0 it will fail can I 6.0 boot loader be flashed via Odin ? Anyone got a working guide my s6 edge keeps rebooting when it wants to on 7.0 need to get back to 6.0.1?
Click to expand...
Click to collapse
Read up this thread. The guy flashed 6.0.1 BTU over 7.0 and it worked fine without issue. If you download your firmware from http://updato.com it comes in 5 files. Then you can flash the 6.0.1 BL separately.
callumbr1 said:
Read up this thread. The guy flashed 6.0.1 BTU over 7.0 and it worked fine without issue. If you download your firmware from http://updato.com it comes in 5 files. Then you can flash the 6.0.1 BL separately.
Click to expand...
Click to collapse
Do i need to flash all the 5 files?
jutley said:
Do i need to flash all the 5 files?
Click to expand...
Click to collapse
Yeah but read the posts in this thread. So far ive only known it work to flash BTU.
callumbr1 said:
Yeah but read the posts in this thread. So far ive only known it work to flash BTU.
Click to expand...
Click to collapse
My s6 edge 64gb is on EE uk was going to download ee 6.0.1 and flash it over ee uk 7.0.
jutley said:
My s6 edge 64gb is on EE uk was going to download ee 6.0.1 and flash it over ee uk 7.0.
Click to expand...
Click to collapse
Yeah okay try that. It may work it may not. If it doesn't then try the UK BTU firmware. You need to flash 4 files. CP, BL, AP and CSC. Not the csc_home
Hi guys!
I have a question! I have a Galaxy S9+ (dual sim) and I would like to "dirty flash" the new Android P because I'm not getting the update via OTA for now. Is this possible without root?
Thank you!
tecksulfur said:
Hi guys!
I have a question! I have a Galaxy S9+ (dual sim) and I would like to "dirty flash" the new Android P because I'm not getting the update via OTA for now. Is this possible without root?
Thank you!
Click to expand...
Click to collapse
Yes, using ODIN download the ROM for your device and flash it from your PC. Knox won't be triggered if it's and official ROM
Sent from S.G. S9+ Duos
What if I try to flash the new Android 9 with official rom for another country with the same PDA and CSC ?
G9650?
nothing yet for the snapdragon g9650 version?:confuso:
sentinelvdx said:
Yes, using ODIN download the ROM for your device and flash it from your PC. Knox won't be triggered if it's and official ROM
Sent from S.G. S9+ Duos
Click to expand...
Click to collapse
Thanks for the reply, but if I flash it with Odin, I will lose everything, is like Factory Reset. I would like to keep everything just as it is now.
tecksulfur said:
Thanks for the reply, but if I flash it with Odin, I will lose everything, is like Factory Reset. I would like to keep everything just as it is now.
Click to expand...
Click to collapse
U won't lose u data if u select FOR CSC - HOME CSC
WILL.13 said:
U won't lose u data if u select FOR CSC - HOME CSC
Click to expand...
Click to collapse
Ohh nice, I didn't know that. So if I choose for CSC -> Home CSC it won't erase my stuff? Nice, thank you very much!
tecksulfur said:
Ohh nice, I didn't know that. So if I choose for CSC -> Home CSC it won't erase my stuff? Nice, thank you very much!
Click to expand...
Click to collapse
Yh u won't
tecksulfur said:
Hi guys!
I have a question! I have a Galaxy S9+ (dual sim) and I would like to "dirty flash" the new Android P because I'm not getting the update via OTA for now. Is this possible without root?
Thank you!
Click to expand...
Click to collapse
Download new firmware and flashing with odin 13
Not failed
alimokhtarabadi said:
Download new firmware and flashing with odin 13
Not failed
Click to expand...
Click to collapse
Where did you get the firmware , or better where Can I download it ? Sammobile ? If yes , It is asking for a premium subscription.
ZaKaRia OuH said:
Where did you get the firmware , or better where Can I download it ? Sammobile ? If yes , It is asking for a premium subscription.
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=11410963190603881419
ZaKaRia OuH said:
Where did you get the firmware , or better where Can I download it ? Sammobile ? If yes , It is asking for a premium subscription.
Click to expand...
Click to collapse
No need for a premium subscription, just register and you'll be able to download it.
alimokhtarabadi said:
Download new firmware and flashing with odin 13
Not failed
Click to expand...
Click to collapse
Good for you. I only manage to flash the CSC one which clean flash my phone. Home CSC get stuck on something .img.
Hi. So I'm on stock Oreo with XME CSC. I have downloaded stock Pie with OXM CSC. What should I do in Odin if I want to upgrade the firmware without losing data?
twinh3ad said:
Hi. So I'm on stock Oreo with XME CSC. I have downloaded stock Pie with OXM CSC. What should I do in Odin if I want to upgrade the firmware without losing data?
Click to expand...
Click to collapse
The theory is just flash Home_CSC instead of the CSC one. You'll get 4 files from sammobile, but need only 3. Choose the home_CSC will not delete data. But as I mentioned above, my S9+ got stuck with Home_CSC so I have to flash the CSC ones. But @alimokhtarabadi successfully flash with Home_CSC, good luck to you.
Gody1313 said:
nothing yet for the snapdragon g9650 version?:confuso:
Click to expand...
Click to collapse
X2