easy install recovery
- Adb tool
- CWM Recovery - R11
- Original Miu Recovery
- TWRP Recovery (twrp-2.8.7.0-cancro)
- CynogenMod Recovery
all in one
https://drive.google.com/file/d/0B2UMSvqNe0deM1A2THhiRjRoLWs/view
https://youtu.be/-mHnjk0-8PM
Related
Hope somebody can help me with this. I want to root my HTC One X + (with the all in one root kit 2.3) and put the rom ViperX+ 1.0.3 on it. Can somebody confrim that the steps below are the right ones.
With all in one root kit V2.3.
1.install HTC Drivers
2.register at HTCdev
3.Get Token ID
4. Submit Token ID
5.Unlock bootloader
So far everything goes oke. But for the below steps I need help.
- Is this the moment to make a backup by creating a CWM image?
After that
- Do i need to Flash recovery TWRP International with the all in one root kit v2.3 or is it better to flash Venom mod of TWRP recovery with Venom Flasher?
- flash Elite kernel repacked (boot.img) for Viper with Venom Flasher (or is it better to flash it with the all in one tool kit)
- Boot in recovery (vol down + power)
- Full wipe
- Install Viper rom (zipfile)
-Reboot phone
Hope you guys can help me with this. Thanks!
a bit searching would have led you to this thread: http://forum.xda-developers.com/showthread.php?t=2066390
at all, your steps are nearly fine: but at first you need a custom Recovery for creating any Backup (CWM Backup does just work with CWM recovery - at all those backups are generally referred as "nandroid"-Backups. But backups created with CWM are not compatible with TWRP and TWRP-Backups are not compatible with CWM)
For Viper ROM, the Viper modded TWRP is recommended, and the VenomFlasher tool is more easy than AIO-Toolkit for flashing Recovery (Venom modded TWRP 2.4.1.0) and Kernel
So do:
6. put ViperROM on your sdcard
7. flash recovery with Venom Flasher (in fastboot mode*)
8. boot into recovery, make backup (system, data and kernel, so you have your original kernel in case of ... you need to go back to stock)
9. flash kernel (in fastboot mode*)
10. go into recovery, do full wipe, and flash your ROM
Done.
* if you aren't in fastboot mode, Venom Flasher will take you there, so you just need your device switched on and connected to your computer with USB debugging activated in the developer options.
UNLOCKED BOOTLOADER REQUIRED FOR BELOW RECOVERIES
ClockworkMod
Downloads:
6.0.4.5
CWM 6.0.4.5 Touch for P769
6.0.4.8
CWM 6.0.4.8 No-Touch for P769
Philz Advanced CWM
Downloads:
6.40.0
Philz CWM 6.40.0 - Based on CWM 6.0.4.8 for P769
TWRP
Downloads:
2.7.1.1
TWRP 2.7.1.1 for P769
Information
Questions:
- What is the difference between normal recovery and these recoveries?
If you install a normal CWM/TWRP/Philz release on an unlocked P769, you will notice that the screen is inverted/mirrored and/or the the touch is also wonky. The above uploaded recoveries have been especially adapted to work correctly, so there is no-more mirror issue and the touch works fine as well. After flashing the below fix too, the touch should work while on your ROM as well.
Please note, you may have to also flash this fix (cwm_ts_fix_p769) for the wonky touchscreen after flashing the recovery. Get it here
- How to install recovery?
Option 1:
a. Go to recovery and flash the zip
Option 2:
a. Extract the recovery.img file from the zip and copy to your internal/external SD card on phone
b. Install Rashr from here
c. Flash the recovery from within the application by browsing for it
Option 3:
a. Extract the recovery.img file from the zip and copy to your computer
b. Use fastboot to install recovery, see here
c. Use the command "fastboot flash recovery recovery.img"
Option 4:
a. Via flash_image, use this guide.
- Are these recoveries bug-free?
I have tested all the recoveries on my device (T-Mobile P769) and it does boot into them and you can flash zip files, I can't comment on functionality more than that, however if there is an issue with these recoveries then it is most likely an issue with the original recovery as well.
- How are these recoveries created?
These recoveries are created simply by using kuma82's method, described here, which is replacing the kernel (zimage) from the original recoveries and replacing with the kernal from bobZhome's CWM recovery .
- Will you keep updating the recoveries?
I will try my best, I do not compile the recoveries from the original sources, because I don't have the time or know how to, however if there is a new recovery release and required by the users, I will gladly mod it and upload it.
Thanks to:
- @artit for his TWRP
- @artas182x for his CWM 6.0.3.7 and 2nd-init
- @dhiru1602 for his device tree
- @Polloos for his compiled recoveries
- @kuma82 for his guidance on unlocking and making these recoveries
- @BobZhome for creating the CWM recovery, from which the kernel(zimage) was extracted
- Philz, TWRP, CWM for their excellent work and awesome recoveries.
Please inform people that their bootloader must be unlocked to flash these and thanks for 2.7 twrp.
Thanks, I forgot to add that. Done.
I currently have blisspop 4.03 which is based upon lolipop. I want to switch to a marshmallow rom. Do i need to update my firmware, modem, or recovery (TWRPv2.8.7) before flashing a marshmallow rom
Wipe everything.
Install a newer TWRP compatible with Lolipop environment first : https://dl.twrp.me/oneplus2/twrp-3.0.2-0-oneplus2.img.html (install > images > recovery ...)
Install OOS 3.0.2 which changes the bootloader and modem : http://downloads.oneplus.net/oneplus-2/oneplus_2_oxygenos_3.0.2/
DO NOT BOOT (stay in recovery)
Install TWRP compatible with MM environment : https://dl.twrp.me/oneplus2/twrp-3.0.2-2-oneplus2.img.html (install > images > recovery ...)
Reboot to recovery (Reboot > Recovery)
If it's a custom rom that you want : Wipe everything then install it (ZIP)
If you want OOS 3.0.2 then I recommand to Wipe everything again and reinstall OOS 3.0.2
PS : If TWRP ask for allowing modification i recommand to swipe to allow.
xWris3 said:
Wipe everything.
Install a newer TWRP compatible with Lolipop environment first : https://dl.twrp.me/oneplus2/twrp-3.0.2-0-oneplus2.img.html (install > images > recovery ...)
Install OOS 3.0.2 which changes the bootloader and modem : http://downloads.oneplus.net/oneplus-2/oneplus_2_oxygenos_3.0.2/
DO NOT BOOT (stay in recovery)
Install TWRP compatible with MM environment : https://dl.twrp.me/oneplus2/twrp-3.0.2-2-oneplus2.img.html (install > images > recovery ...)
Reboot to recovery (Reboot > Recovery)
If it's a custom rom that you want : Wipe everything then install it (ZIP)
If you want OOS 3.0.2 then I recommand to Wipe everything again and reinstall OOS 3.0.2
PS : If TWRP ask for allowing modification i recommand to swipe to allow.
Click to expand...
Click to collapse
Thank you appreciate it
Is there a cwm recovery availiable for SGH-T959P?
And which Gapps.zip file do I get for OmniRom 6.0.1 (Marshmellow)?
========================
SKY HAWK RECOVERY PROJECT
========================
Warning:Don't flash this Recovery on A11 based Roms. This is strictly only for A12, A12.1 & A13 Roms!
Installation:
Connect Your Device With Pc In Fastbooot
Fastbooot Flash Boot SHRP_Fleur_V3.2_Stable.img
Fastbooot Reboot Recovery
Now In Recovery Flash The Addon.zip
Flash Boot.img Of Your Current Rom in Both Slots
Go To Advanced Settings And Flash Current SHRP
Reboot to System
I'm not the Creator of the here provided files!
All THX @RT1648known Bugs: theming is broken
deleted