Related
Hello guys.
We are grateful because ASUS have included so many useful gimmicky bloatwares in the stock ROM on our device. One of them was AudioWizard. As a groovy sound lover, I didn't found myself satisfy with AudioWizard's sound modes. Because of that, I come here to guide you on how to install ViPER4Android FX properly on your device as I have tried several methods and tempting many errors during installing the driver.
DISCLAIMER: DO WITH YOUR OWN RISK
Do a full nandroid backup! I don't want to take any responsibility if something unexpected happens.
Tested & working fine on my ZE550KL.
I think it should works on any ASUS Zenfone 2 Laser devices as long as you are on stock Lollipop ROM.
Not supported on CyanogenMod 13.0 ROM (Android 6.0.1 Marshmallow).
Known issues:
-AudioWizard isn't working. (You get a payback, dude! It maybe conflict or the V4A broke down the AudioWizard. But you will enjoy a great sound effect better than AudioWizard. Don't cry.)
-FM radio isn't working. (If you think this is very important for you so don't flash.)
-Sound recorder isn't working.
What do you need on your device?
...a working custom recovery such as TWRP or CWM
...a working root access
...BusyBox installed properly
Download the required file (ViPER4Android lollipop.zip) from the link below.
https://drive.google.com/file/d/0B9vjPTwrSocDYzNlTXVrUG44Mms/view
Or download from the attached file (ViPER4Android lollipop.zip) below.
Flash it through your custom recovery.
If you want to use only ViPER4Android FX as a global audio effect, follow Normal mode. But if you want existing audio effects to work, follow Compatible mode.
Enjoy your new audio effect!
Credits & special thanks are given to:
@zhuhang the creator & developer of ViPER4Android FX
@asett3 for sharing the file with me
hi thank you i've been looking for this but i think i don't have acces to the file
Hey you all who are requested, sorry for the inconvenience. Now you can access the file freely.
update
Working perfectly in ZE500KG im sorry i wrong flash it non in twrp
FM is not working after flash.
FM and Sound Record is not working after flash
I didn't notice that FM radio isn't working when I'm still using V4A on stock Lollipop ROM. But my recording app is working well. The most thing I have noticed is AudioWizard not working. It maybe broken down by the V4A.
Sr. M Huzaifah
Bugs shown in the Stock Rom, were these:
- FM Radio does not work, no sound.
- It is not possible to record a phone conversation, because the Sound Record does not work.
Can anyone correcting these bugs?
Thank you
Anybody who are use this V4A can prove that the sound recorder isn't work?
M Huzaifah said:
Anybody who are use this V4A can prove that the sound recorder isn't work?
Click to expand...
Click to collapse
It does not work sound recorder and FM radio.
Is to make it work?
Mandrakerj said:
It does not work sound recorder and FM radio.
Is to make it work?
Click to expand...
Click to collapse
If it is really won't work and you want to make it work again, you need to flash the full firmware. Or you can revert/restore back if you have made a full nandroid backup. Don't use this V4A unless you think the issues isn't disturb your daily driver.
On MM is working if you install it normaly. Just download Viper4Android and install the driver, if is not working try to open the equalizer using your music player. If you use stock music player to open the equalizer it will open the stock one, try with musixmatch ( go to now playing and pres the 3 dots and open equalizer ). Is working with stock equalizer and Radio, Call Recordind is working
i flashed ViperAudio 4.7.1 zip using twrp, it works well without problem on both lollipop and marshmallow. i don't know if it isnt the same with viper4android but the UI is the same, so.. i got it from here http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075 i have been using this on several devices already, seems work flawlessly so far
feinz91 said:
i flashed ViperAudio 4.7.1 zip using twrp, it works well without problem on both lollipop and marshmallow. i don't know if it isnt the same with viper4android but the UI is the same, so.. i got it from here http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075 i have been using this on several devices already, seems work flawlessly so far
Click to expand...
Click to collapse
I confirm it. ViperAudio 4.7.1 working perfectly on ZE500KL with Marshmallow (including sound recorder and FM radio).
do you can make it for the marshmalow
mohamedelkholy said:
do you can make it for the marshmalow
Click to expand...
Click to collapse
Redirect here... http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Work both on LP & MM with no issues at all.
M Huzaifah said:
Redirect here... http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Work both on LP & MM with no issues at all.
Click to expand...
Click to collapse
i should to download any one
mohamedelkholy said:
i should to download any one
Click to expand...
Click to collapse
Pick one that's suits you.
Tanks
i want to flash stock audio wizard
Hey Guys!
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work:
- First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums)
- Secondly, use the custom made SuperSU (credits to @Yash98) = this link
- When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread
- Don't run it yet. Download SELinuxModeChanger via the original XDA thread.
- Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
The new Beta of OxygenOS 3.0 does NOT come with any audio enhancements, so you may even flash packages of audio mods, as I did
MaxtremePL said:
The new Beta of OxygenOS 3.0 does NOT come with any audio enhancements, so you may even flash packages of audio mods, as I did
Click to expand...
Click to collapse
Can you share the audio mods you used?? Thanks
---------- Post added at 10:43 PM ---------- Previous post was at 10:42 PM ----------
shakaraja said:
Hey Guys!
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work:
- First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums)
- Secondly, use the custom made SuperSU (credits to @Yash98) = this link
- When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread
- Don't run it yet. Download SELinuxModeChanger via the original XDA thread.
- Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
Click to expand...
Click to collapse
Thanks for the detailed guide... Will test now thanks
anees167 said:
Can you share the audio mods you used?? Thanks
Click to expand...
Click to collapse
Divine Beats by Royal Seeker (DolbyDigital+ version) located at:
http://theroyalseeker.github.io/
In order for this mod to work you need permissive SElinux
I'm not able to install custom recovery it just gets stuck at the one plus logo. And when I reboot normally it gets back to stock recovery. Any solution plz
Did you disable boot to stock recovery and also you may have to fastboot recovery
Can I reduce the loudest sound of OxyGenOS3 with Viper4Android?
I have distorted sound using the v4a. How fix it?
Bluetooth doesn't work when V4A drivers is installed.
Anyone can solved this problem?
Thanks, got it working. Don't notice too much difference in sound, but maybe I just haven't foudn the right settings yet.
It dosent work getting distorted sound
viper4android install than sound break problem is fix?
mohamm3edadam said:
I'm not able to install custom recovery it just gets stuck at the one plus logo. And when I reboot normally it gets back to stock recovery. Any solution plz
Click to expand...
Click to collapse
You need the TWRP version meant for H2OS. You will find it in any H2OS based ROM thread.
Skick3 said:
Can I reduce the loudest sound of OxyGenOS3 with Viper4Android?
Click to expand...
Click to collapse
Yes, there are options. Find gain controls and tweak them to your preference.
ras_fyah said:
I have distorted sound using the v4a. How fix it?
Click to expand...
Click to collapse
Akhil701 said:
It dosent work getting distorted sound
Click to expand...
Click to collapse
If you still are on OOS 2.2.x then V4A will not work. This fix is specifically meant for OOS 3.
If you are on OOS 3, then try reflashing OOS 3 with a clean flash. This might fix it, but only if you are on OOS 3.
mvha said:
Bluetooth doesn't work when V4A drivers is installed.
Anyone can solved this problem?
Click to expand...
Click to collapse
Did you install the right drivers? And also check if you set the SELinux mode to Permissive.
locxFIN said:
Thanks, got it working. Don't notice too much difference in sound, but maybe I just haven't foudn the right settings yet.
Click to expand...
Click to collapse
Search XDA Forums for V4A profiles and use a preferred profile according to your type of music.
whwhdtk5689 said:
viper4android install than sound break problem is fix?
Click to expand...
Click to collapse
Only if you have flashed the latest beta of OOS 3. This fix is OOS 3 specific and DOES NOT APPLY TO OOS 2.
arch_geek said:
Only if you have flashed the latest beta of OOS 3. This fix is OOS 3 specific and DOES NOT APPLY TO OOS 2.
Click to expand...
Click to collapse
yes. i'm oos 3.0 MM.
wow i'm install now viper4android !
thank you !
arch_geek said:
Did you install the right drivers? And also check if you set the SELinux mode to Permissive.
Click to expand...
Click to collapse
You've Got a Point. I have installed wrong version of V4A. Now working all. Thank You
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
shakaraja said:
Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Click to expand...
Click to collapse
Hm i had the same problem. Driver Status was false.
My Workaround was i clicked in Viper many Menus up an down. Lock Effect Mode disable to speaker. UI Setting to Expert and suddenly the Driver Status was True.
No cleaning data. I didn´t installed google play music.
With Viper4Anroid on OO2 Oxygen3 the sound are definitly noiser and better. (Master Gain (Limiter) / Output Gaine -20db)
Thx for the hint with these app.
_Epix_ said:
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
Click to expand...
Click to collapse
How to root your phone. You find it in these guide
> http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
Last time I used viper was the nexus 4 days almost 2 years ago... They have improved the audio (most likely new audio hardware on OP2) but yh it sounds a lot better then stock oxygenOS 3 it does the job till Maxxaudio is back
MaxtremePL said:
Divine Beats by Royal Seeker (DolbyDigital+ version) located at:
http://theroyalseeker.github.io/
In order for this mod to work you need permissive SElinux
Click to expand...
Click to collapse
Thank you soooo much! This did the trick. I was so frustrated with the MM update until you saved my ears with this suggestion. :good:
_Epix_ said:
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
Click to expand...
Click to collapse
If you flashed OOS 3, it is highly likely that the build was not a pre-rooted build. To root follow this guide at this link :
http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
anees167 said:
Last time I used viper was the nexus 4 days almost 2 years ago... They have improved the audio (most likely new audio hardware on OP2) but yh it sounds a lot better then stock oxygenOS 3 it does the job till Maxxaudio is back
Click to expand...
Click to collapse
Actually V4A can be tweaked to sound better than MaxxAudio. Try XtremeMUSIC mod by androidexpert35. It includes V4A as an addon.
Link to the above mod is here: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
&roid said:
Thank you soooo much! This did the trick. I was so frustrated with the MM update until you saved my ears with this suggestion. :good:
Click to expand...
Click to collapse
Try XtremeMUSIC mod. Link: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
Why isn't any sound mod working on my RN3 Android O (Nitrogen OS) . I remember flashing the same Dolby zip file before. I tried Viper4Android, Dolby Atmos, Arise sound mod but none of them worked. Does anyone have any clue?
coolanushboy said:
Why isn't any sound mod working on my RN3 Android O (Nitrogen OS) . I remember flashing the same Dolby zip file before. I tried Viper4Android, Dolby Atmos, Arise sound mod but none of them worked. Does anyone have any clue?
Click to expand...
Click to collapse
I'm now in latest NoS oreo rom build. In my phone all sound mod working. But I'm only use viper4android. It enough for me for my earphone.
Before use this. You need to flash magisk after that open magisk and install magisk Direct Install ( Recommend ) option which is third option. Then wait it will be self reboot.
Now open magisk manager download module Dolby Atmos or viper4android.
For viper4android script will be install but apps will be not. So, you need to download self from site. Viper4android 2.5.0.5 apk.
Done.
67silverlight said:
I'm now in latest NoS oreo rom build. In my phone all sound mod working. But I'm only use viper4android. It enough for me for my earphone.
Before use this. You need to flash magisk after that open magisk and install magisk Direct Install ( Recommend ) option which is third option. Then wait it will be self reboot.
Now open magisk manager download module Dolby Atmos or viper4android.
For viper4android script will be install but apps will be not. So, you need to download self from site. Viper4android 2.5.0.5 apk.
Done.
Click to expand...
Click to collapse
Thanks! Will check it out.
If u are on AOSP Oreo like I am,
Root it using magisk
Then download viper magisk mod n flash
Then boot up n enable viper
Also I tried ARISE mod n it's working great..but flash viper4android magisk mod first n then arise
Is there a way !without! Magisk? Cause I prefer SuperSU and I don't like/need Magisk.
coolanushboy said:
Why isn't any sound mod working on my RN3 Android O (Nitrogen OS) . I remember flashing the same Dolby zip file before. I tried Viper4Android, Dolby Atmos, Arise sound mod but none of them worked. Does anyone have any clue?
Click to expand...
Click to collapse
mine is also not working
Can it be that Oreo have some kind of more security, that makes it harder to modify and making audio stuff to work, even in permissive mode?
coolanushboy said:
Why isn't any sound mod working on my RN3 Android O (Nitrogen OS) . I remember flashing the same Dolby zip file before. I tried Viper4Android, Dolby Atmos, Arise sound mod but none of them worked. Does anyone have any clue?
Click to expand...
Click to collapse
Use Arise+deuteronomy aroma installer and install viper4arise it will work
Try this one, tell me if it's work.
https://forum.xda-developers.com/showpost.php?p=73964358
FX Manager for Kenzo/Kate :
A Single Manager for your FX needs !
Instructions :
Flash it via recovery to install ViPER4Android, Dolby Atmos and Shox Audio mod by @ScreaMySkrillEX
Remove any magisk module regarding Viper4Android, Dolby Atmos or uninstall old Viper4Android app from data before installing
If Viper4Android doesnt work then try changing SElinux to permissive
Features :
Aroma installer
Option to Install/Uninstall
Option to choose FX based on your wish
Option to include IRS samples (Starter Pack and Free samples by @zhuhang)
Option to delete AudioFX
Option to remove Lineage os default music App (Eleven.apk)
Option to install a lightweight music player
v1.1
Added option to remove deepbuffer during installation (fixes when streaming apps do not process audio effects)
Added option to restore deepbuffer during uninstall
v1.2
Added Snapdragon Music FX
Fixed Installer stuck error on android 8.1
Note : This won't works on Android 8.0
V4A works on Android 8.1, Dolby won't work
If you use shox audio mod please give a thanks or pizza to @ScreaMySkrillEX for his awesome work. You can find original thread in link below
Credits : ViPER520, @zhuhang, @ScreaMySkrillEX, @worstenbrood, Myself
Links :
Shox Audio Mod Original Thread
ViPER4Android Official Thread
ViPER's Audio Blog
Dolby Atmos original Thread
Reserved..
energyspear17 said:
Reserved..
Click to expand...
Click to collapse
Help?
Perfectly working on ResurrectionRemix ROM 5.8.5.-20171017 Nougat with Radon kernel. Finally an easy solution. Thank you!
why every i reboot my device viper4androidfx always ask to install driver?
This work for me.http://cloud.tapatalk.com/s/5a07c7f88d6eb/ViPER4Android-2.5.0.5-20170621.zip
Sent from my Redmi Note 3 using Tapatalk
armo1111 said:
Help?
Click to expand...
Click to collapse
ROM name ??
yaz69 said:
why every i reboot my device viper4androidfx always ask to install driver?
Click to expand...
Click to collapse
Did installation went without any errors ?
energyspear17 said:
ROM name ??
Click to expand...
Click to collapse
DOT os
armo1111 said:
DOT os
Click to expand...
Click to collapse
ill check it :good:
energyspear17 said:
Did installation went without any errors ?
Click to expand...
Click to collapse
solved! i was uninstall other fx app and it work fine :good:
armo1111 said:
Help?
Click to expand...
Click to collapse
Set Selinux to permissive
Soo8 said:
Set Selinux to permissive
Click to expand...
Click to collapse
Thanks worked, but when i am listening music with youtube the processing its still no, help?
New Update
Now V4A installer turned to FX Manager , You can manage V4A, Dolby Atmos or Shox Audio mod using this. Install or Uninstall doesnt conflict with each other.
energyspear17 said:
Now V4A installer turned to FX Manager , You can manage V4A, Dolby Atmos or Shox Audio mod using this. Install or Uninstall doesnt conflict with each other.
Click to expand...
Click to collapse
Can't get v4a to work after installing shox+v4a with FXmanager 1.0. It seems to be a problem that shox modifies some values after the v4a package is installed, because I've seen this just installing separate zips. Installing the shox package before you install v4a should fix this.
Soo8 said:
Can't get v4a to work after installing shox+v4a with FXmanager 1.0. It seems to be a problem that shox modifies some values after the v4a package is installed, because I've seen this just installing separate zips. Installing the shox package before you install v4a should fix this.
Click to expand...
Click to collapse
I installed shox + v4A only. Working perfectly on du
Shox don't affect v4A .. Yes Audiophile mode causes conflicts. If you read audiophile mode's agreement you can see that
Build updated... Now if you select shox with other fx, shox will be installed first before installing others....
armo1111 said:
Thanks worked, but when i am listening music with youtube the processing its still no, help?
Click to expand...
Click to collapse
try to delete deep_buffer
New Update v1.1
Added option to remove deepbuffer during installation (fixes when streaming apps do not process audio effects)
Added option to restore deepbuffer during uninstall
kevinhhgea said:
try to delete deep_buffer
Click to expand...
Click to collapse
I deleted, the when i restarted phone i opened V4A i needed too install driver i did and again i rebooted
Same problem dont work with youtube, any help?
EDIT: Tried spotify, doesnt work either..
Dear All,
I tried experimenting with various roms and didnt find a suitable sound mod that could impress me.
However my search ended after finding this ultimate Dolby Atmos port which is easy to flash on any custom Oreo based rom.
Instructions:
1) Flash Magisk v16
2) Download Audio Modification lib from Downloads in Magisk
3)Download and flash Ainur Mod in Magisk
4) Flash attached Dolby Atmos magisk module
Thats it ! Experience the change in overall sound..
Many thanks to this devloper...
https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508
Enjoy Guys...
can you share link ainur mod?
Attached for magisk compatibility.
Dolby sounds keeps crashing.
Unable to open both dolby sounds and atoms
Thanks. Work like charms.
Doesn't seem to activate after reboot in magisk
What does it affect? Speaker or playback via headphones quality
Both. But do not believe yet, try it yourself...
keeps stopping.
suree_n said:
Both. But do not believe yet, try it yourself...
Click to expand...
Click to collapse
[email protected] said:
Click to expand...
Click to collapse
Suggest me moto g5s plus Dolby atmos
Those who are have problems of force closure of app (keeps stopping), flash Audio Modification Library on Magisk. Everything will work then.
Boot Loop
I have done exactly step-by-step guide pointed out, but after flashing Dolby from attachment, my phone is on Boot load consistently for half an hour now. Reboot it few times, any help ?
EDIT: I have just noticed I have Android 9. Hahahaha
Keeps Stopping
Is there an android pie version of this?