This is just a factory backup of the new Lollipop ROM for users with the TrueSmart +.
This is *NOT* for the original TrueSmart (yet), so if you format and download this to your original unit (you know, the one not running Lollipop) you will not be able to boot it.
Get the download here: Factory Image (Flash in SP Flash Tool)
Does the word "yet" mean, that you are working on it for the original truesmart?? That whould be awesome!
Gesendet von meinem GT-I9295 mit Tapatalk
i flash success Ok . but bootloop can't start Omate TS Plus ..
---------- Post added at 12:21 PM ---------- Previous post was at 11:22 AM ----------
http://i.imgur.com/tVdslyS.png
i see miss usrdata ? right ?
http://i.imgur.com/tVdslyS.png
Why would you flash this unless you bricked your unit previously?
moviecut said:
Does the word "yet" mean, that you are working on it for the original truesmart?? That whould be awesome!
Gesendet von meinem GT-I9295 mit Tapatalk
Click to expand...
Click to collapse
Yea, I'm working on full root I (have partial) so I can do a proper backup and see if a port works.
kuronosan said:
Why would you flash this unless you bricked your unit previously?
Click to expand...
Click to collapse
now my watch die can't boot . show logo . and don't anything
You still didn't answer my question. Why are you flashing a full backup on a unit that isn't malfunctioning?
New to this, so pardon the ignorance...
Is this file meant to be a back up, in case our TS+ starts to go haywire? As in, I would plug it into the computer, delete all files, and put this file on instead to "reset" it back to the original state? Thanks, your help is appreciated.
kuronosan said:
You still didn't answer my question. Why are you flashing a full backup on a unit that isn't malfunctioning?
Click to expand...
Click to collapse
i think flash file backup in this topic and my watch normal .. but my watch can't boot and suck logo . i don't know (_ _!)
sorry
proxy170 said:
New to this, so pardon the ignorance...
Is this file meant to be a back up, in case our TS+ starts to go haywire? As in, I would plug it into the computer, delete all files, and put this file on instead to "reset" it back to the original state? Thanks, your help is appreciated.
Click to expand...
Click to collapse
These are more or less 1:1 images of the TS+ so yes, in case you somehow need up your watch you should be fine to flash it.
I honestly would only flash the system image, as that would be the only thing you'd need to replace.
LeHoang2206 said:
i think flash file backup in this topic and my watch normal .. but my watch can't boot and suck logo . i don't know (_ _!)
sorry
Click to expand...
Click to collapse
Please contact [email protected] and send back your watch to our service center and we will only make you pay the shipment fee back to you ($20) but it will take a few months from reception and you must use a logistic with a tracking number when you send the unit back to us. The service will cost Omate $40 for this reflashing. In the future do NOT do things you do not know.
OmateDev said:
Please contact [email protected] and send back your watch to our service center and we will only make you pay the shipment fee back to you ($20) but it will take a few months from reception and you must use a logistic with a tracking number when you send the unit back to us. The service will cost Omate $40 for this reflashing. In the future do NOT do things you do not know.
Click to expand...
Click to collapse
2 months too long .
moviecut said:
Does the word "yet" mean, that you are working on it for the original truesmart?? That whould be awesome!
Gesendet von meinem GT-I9295 mit Tapatalk
Click to expand...
Click to collapse
OmateDev said:
In the future do NOT do things you do not know.
Click to expand...
Click to collapse
In the future do NOT buy things you do not know.
Thanks omate.
What is the kernel version of the ts+ rom?
3.10.67
kuronosan said:
3.10.67
Click to expand...
Click to collapse
3.10.67 is ancient, even for Lollipop. If I remember correctly Lolli started at 3.10.62, and last time I looked was up to 3.10.90. So pretty much every commit is missing.
I took a pic of the screen. 3.10.72 is the version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recovery :v Chinaese
LeHoang2206 said:
Recovery :v Chinaese
Click to expand...
Click to collapse
Can you translate the menu options here?
CPGOD said:
Can you translate the menu options here?
Click to expand...
Click to collapse
I try test . But my watch can't boot because kernel or ubin
Related
http://forum.xda-developers.com/honor-6/general/guide-workaround-running-xposed-t3338765
Thread above. Im probably gonna try it later
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my KIW-L21 using Tapatalk
Faheemarif252 said:
HUGE IMG
Click to expand...
Click to collapse
Use a web browser, if u getting that message when tryna click the link
Kennii said:
Use a web browser, if u getting that message when tryna click the link
Click to expand...
Click to collapse
It opened fine.... And the method should work just fine.... Yielding no problems whatsover... Do give it a try and tell us your findings...
Ps. I wouldve tried but I'm still waiting for my unlock code
Sent from my KIW-L21 using Tapatalk
Trying this now. Just to be certain this is an ARM64 device? Can't find any info on this other than somone using 64-bit G-apps.
EDIT: Didn't work for me Using stock rom. KIW-L21
Jammo2k5 said:
Trying this now. Just to be certain this is an ARM64 device? Can't find any info on this other than somone using 64-bit G-apps.
Click to expand...
Click to collapse
Yes ARM64, and xposed work's very well
flecky22 said:
Yes ARM64, and xposed work's very well
Click to expand...
Click to collapse
Hmmm How long did it take to boot after you flashed the xposed zip?
about 5/10 minutes
flecky22 said:
about 5/10 minutes
Click to expand...
Click to collapse
Damn i din't leave it that long. Will redo now
flecky22 said:
Yes ARM64, and xposed work's very well
Click to expand...
Click to collapse
So this does work? What model do you have? Can anyone confirm it's working on l24? I've been hoping to get xposed until we get some custom rom action!
wickedesires said:
So this does work? What model do you have? Can anyone confirm it's working on l24? I've been hoping to get xposed until we get some custom rom action!
Click to expand...
Click to collapse
Yes it's work, i have a L21.
flecky22 said:
Yes it's work, i have a L21.
Click to expand...
Click to collapse
Sweet! Gonna try this in a bit. Thanks for confirmation. Any performance issues so far?
No, for me it works as before
Yeah i have another issue now... It says it's installed but not activated :/
"For Android 6.0pen build.prop and add these lines ro.config.hwtheme=0 and ro.config.hw_theme=0
For Android 5.0-5.1.1: Open local.prop (in system/emui/base/prop/local.prop) and add these lines ro.config.hwtheme=0 and ro.config.hw_theme=0
Again reboot your device (this boot won't take long)."
In honor 5x local.prop (in cust/hw/eu/prop)
flecky22 said:
"For Android 6.0pen build.prop and add these lines ro.config.hwtheme=0 and ro.config.hw_theme=0
For Android 5.0-5.1.1: Open local.prop (in system/emui/base/prop/local.prop) and add these lines ro.config.hwtheme=0 and ro.config.hw_theme=0
Again reboot your device (this boot won't take long)."
In honor 5x local.prop (in cust/hw/eu/prop)
Click to expand...
Click to collapse
Yeah i missed that bit. A combination of being a bit of an idiot, tiredness and nagging girlfriend.
Jammo2k5 said:
Yeah i missed that bit. A combination of being a bit of an idiot, tiredness and nagging girlfriend.
Click to expand...
Click to collapse
lol
Arobase40 said:
How long did it take after the first boot (after app, framework and Priv-app copying) and did you have any messages saying "optimizing apps" or such ?
It's being said to wait about 20-30 mn and I'm waiting for almost 1 hour at the Honor Logo... ^^
Click to expand...
Click to collapse
5/10 minutes and yes i have a message like optimizing apps
Test in build.prop or deactivates resource hooks in xposed settings, but then if you want to use gravity box for example, it will not work, build.prop change is the best solution.
---------- Post added at 10:56 PM ---------- Previous post was at 10:47 PM ----------
build.prop change is enough , I just tried , no need to change local.prop .
Arobase40 said:
Hmmm, damn it !
Don't understand why it was not working the first time...
Now, I got everything installed but I couldn't modify the /cust/hw/eu/prop/local.prop file !!!
I'm in R/W, but every time I modify the file, I loose the changes when I leave it and so the Xposed framework can't activate... ^^
Click to expand...
Click to collapse
I used es file explorer (an older version) to edit the local.prop and I had to select the root of the SD card to get it to save correctly (I have absolutely no idea why lol). After that everything worked great.
i did it. i caved and spent 15 USdollars on a sketchy persian website.
'n' guess what mah-f*kas
sh*t flashes yo.
no surveys, no ads. justwhatchuneeded
here's the guide
download odin 3.12 and run it : http://www.mediafire.com/download/2t2sjqxtogbkafk/odin_3.12.3.rar
download the G930AUCS2APF2 update file: https://drive.google.com/file/d/0B17W2gA_VROXbTVJRjhHQUNVdGc/view?usp=drivesdk
Mega.nz mirror:https://mega.nz/#!b8FDUIKA!1nSj4MgShR9C7Xnma2b_ttNOcMo-GYbE2kd4f1V-qDo
extract it
extract the files inside that
then
in odin, change no options. NONE.
click the ap box,select the ap_G930AUCS2APF2 tar.md5 file
do the same for bl, csc, and cp
press "start"
<stock>
<mic droped>
<echos of thanks button being clicked>
Does this work if I have my phone rooted in the PD1 version ?
Enviado desde mi SAMSUNG-SM-G930A mediante Tapatalk
Carlos Terán said:
Does this work if I have my phone rooted in the PD1 version ?
Enviado desde mi SAMSUNG-SM-G930A mediante Tapatalk
Click to expand...
Click to collapse
yes, it should
the "D" in PD1 means 4 as in the fourth letter of the alphabet, which means April.
this is PF2, and i realised the typo in the title and updated. dropbox says 8 minutes
f means june. 6th letter, 6th month
you will be updating though, and will not be able to downgrade
its uploaded guys. hit that thanks when it works. android pay and samsung pay both open for me, and no more lag. this should help get the rooted one working right too
If you got it from the website I think you did, then I'm not surprised that it's legitimate considering I've been told the same thing.
However, thanks dude! We've been waiting for the flash files so that we can restore if attempted root goes wrong.
I forget , any way to update from May update if rooted without formatting ?
Can you upload it to Google Drive so we can download it? Your account got disabled....
Just woke up, uploading to gdrive and looking for another site for a mirror.
The g930u firmwares coming soon too, if anybody knows a good file hosting site, or can host it themselves or on afh let me know
Ae3NerdGod said:
Just woke up, uploading to gdrive and looking for another site for a mirror.
The g930u firmwares coming soon too, if anybody knows a good file hosting site, or can host it themselves or on afh let me know
Click to expand...
Click to collapse
Thank you. I'll be waiting patiently
Ae3NerdGod said:
Just woke up, uploading to gdrive and looking for another site for a mirror.
The g930u firmwares coming soon too, if anybody knows a good file hosting site, or can host it themselves or on afh let me know
Click to expand...
Click to collapse
https://mega.nz/ is really good
Can someone mirror this file please? And thank you for finding it!! My local "Samsung Expert" would not flash my phone back. And I am pretty sure he was an idiot and would not want him touching my phone anyway. It makes me wonder what kind of training they get?
Ae3NerdGod said:
Just woke up, uploading to gdrive and looking for another site for a mirror.
The g930u firmwares coming soon too, if anybody knows a good file hosting site, or can host it themselves or on afh let me know
Click to expand...
Click to collapse
Thanks Buddy, can't hold my breath for G930U fw....
wireglitch said:
Can someone mirror this file please? And thank you for finding it!! My local "Samsung Expert" would not flash my phone back. And I am pretty sure he was an idiot and would not want him touching my phone anyway. It makes me wonder what kind of training they get?
Click to expand...
Click to collapse
Working on it just finished uploading check op
Billy06010 said:
https://mega.nz/ is really good
Click to expand...
Click to collapse
Uploading now, gdrive link posted
Do we have any secondary confirmation the files are correct and flash alright? And thanks again for posting them up. Everyone really needs them.....myself included.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IT FLASHED. THANK YOU!
I really needed this. However, it still says it has a custom firmware on the bootloader. Bug I guess?
PeregrineX said:
-snip-
Click to expand...
Click to collapse
Is the knox warranty bit tripped?
If not, then it's probably just a bug with the flash. If it was un-official firmware, the bootloader would never have accepted it.
PeregrineX said:
IT FLASHED. THANK YOU!
I really needed this. However, it still says it has a custom firmware on the bootloader. Bug I guess?
Click to expand...
Click to collapse
Does Samsung pay work again? There are reports that using Kies 3 restores it's functionality. Unfortunately, it appears AT&T doesn't supply firmware through Kies. I doubt Odin flashes will restore Samsung pay functionality, but we won't know until someone confirms it one way or the other. Probably for the same reason that your system still shows custom even though it is running official firmware.
scott14719 said:
Does Samsung pay work again? There are reports that using Kies 3 restores it's functionality. Unfortunately, it appears AT&T doesn't supply firmware through Kies. I doubt Odin flashes will restore Samsung pay functionality, but we won't know until someone confirms it one way or the other. Probably for the same reason that your system still shows custom even though it is running official firmware.
Click to expand...
Click to collapse
Seems to work.... Maybe it was only for the first boot that there was a "custom" icon because I'm not getting that stupid warning in my notifications.
PeregrineX said:
Seems to work.... Maybe it was only for the first boot that there was a "custom" icon because I'm not getting that stupid warning in my notifications.
Click to expand...
Click to collapse
So the custom icon is gone on boot? And what is your knox flag status?
I've flashed TWRP and it was working.
I made the mistake of doing a Huawei system update (directly rather then manually) to get to marshmellow because a lot of the ROMs
require it.
After that EMUI recovery was put back on there.
So I tried reflashing TWRP and I have not been able to do that, it always boots EMUI recovery now.
Can I trust a full NAND restore to stock + twrp (5.1 lollipop) from EMUI 4.0 Marshmellow? and can
can I do it from within fastboot boot twrp.img without any complications?
I've tried some of the suggestions on the other threads for flashing recoveries like force booting TWRP and
flashing from within TWRP and then rebooting recovery (still have EMUI).
Every device has its quirks I should have read more about the Honor's before taking action.
But I did look for some instructions on this sort of thing but I didn't find it anything labeled for it.
I have a (FULL absolutely everything) NAND backup sitting on my phone's memory card but I've never used it.
I hope this is okay, I've solved my problem (Restored from NAND).
Thank god for the common wisdom of taking a full NAND backup first thing.
If your new as well, plz there is no greater investment you can make in your modding then taking a full NAND backup the second you have TWRP installed on your device (copy it to all your PC's as well when you get a chance).
add fixed tag to the post.
venugopalu007 said:
add fixed tag to the post.
Click to expand...
Click to collapse
We need a moderator to do that!
PalakMi said:
We need a moderator to do that!
Click to expand...
Click to collapse
ho i though that we can edit head in advanced settings
Let's wait for a mod to step in.
Sent from my Honor 8 using XDA Labs
Nah I would have done that if that was a option, this is the first forum that I've seen that
hasn't had that.
venugopalu007 said:
ho i though that we can edit head in advanced settings
Click to expand...
Click to collapse
No, it always need a moderator to edit it
PalakMi said:
No, it always need a moderator to edit it
Click to expand...
Click to collapse
But, We can also edit the Head in "Go Advanced" Example: This is my post
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
venugopalu007 said:
But, We can also edit the Head in "Go Advanced" Example: This is my post
Click to expand...
Click to collapse
Ah, I'm using mobile platform.
That's why I didn't know about this option, thank you
PalakMi said:
Ah, I'm using mobile platform.
That's why I didn't know about this option, thank you
Click to expand...
Click to collapse
Yes bro , it was only available in Pc view.
venugopalu007 said:
Yes bro , it was only available in Pc view.
Click to expand...
Click to collapse
Again, thanks for the tip :highfive:
PalakMi said:
Again, thanks for the tip :highfive:
Click to expand...
Click to collapse
You're welcome mate :highfive:
Rommco05 said:
We can edit title in app too
Click to expand...
Click to collapse
great , thanks
Hi, all!
My phone died at the morning after using Bluetooth at the public. Is there a possibility to recover it with a data? LTE version.
Thanks in advance,
Mateusz
Does it turn on at all?
Does it bootloop?
boot-loop
Vagelis1608 said:
Does it turn on at all?
Does it bootloop?
Click to expand...
Click to collapse
Yes, it is a boot-loop. PC doesn't see it.
@admin pls change my subject:]
matiz1999 said:
Yes, it is a boot-loop. PC doesn't see it.
@admin pls change my subject:]
Click to expand...
Click to collapse
I take it you don't have root?
And the bootloader is locked?
Some year ago I have it rooted but I get back to standard software
matiz1999 said:
Some year ago I have it rooted but I get back to standard software
Click to expand...
Click to collapse
Since you want to keep your data, try to get into download mode and flash a kdz.
If that doesn't work, I'm afraid you are gonna have to do a "hard reset" (factory reset/data wipe).
May you provide me with a good tutorial for doing it?
Here is one: https://forum.xda-developers.com/showthread.php?t=2797190
If it doesn't work, just use Google to find another one.
I will tell you about the hard reset, if you want.
I am problematic - and some alternative because I cannot install stuff on this PC - some portable version of LG drivers? I cannot find
matiz1999 said:
I am problematic - and some alternative because I cannot install stuff on this PC - some portable version of LG drivers? I cannot find
Click to expand...
Click to collapse
Nope.
Get an admin to install it.
No way around it.
Unless you want to try the hard reset, which doesn't need a PC.
But you will lose all your data.
Sic! But on the downloaded mode, it's writing unrooted user b13>?
Sic! But in downloaded mode there's info that it is unrooted user b13>?
matiz1999 said:
Sic! But in downloaded mode there's info that it is unrooted user b13>?
Click to expand...
Click to collapse
Even better!
That is meant for LG's engineers to see if your phone is rooted when you sent it in for a fix under the warranty.
If it says rooted, they will mark warranty void and won't fix it, unless you pay them.
Anyway, it let's you flash no matter what it says there.
So go ahead and flash the kdz.
Okay, cool for me.
I already started it but
1st I am not sure which version I have, can I check it somewhere
2nd the tool shows that my phone is disconnected
matiz1999 said:
Okay, cool for me.
I already started it but
1st I am not sure which version I have, can I check it somewhere
2nd the tool shows that my phone is disconnected
Click to expand...
Click to collapse
There is a sticker behind the battery.
Vagelis1608 said:
There is a sticker behind the battery.
Click to expand...
Click to collapse
die
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://ibb.co/c0kwrk https://ibb.co/c0kwrk
"do you wish to cancel s/w update"
"phone is disconnected from the PC"
I tried already 3 more tutorials
matiz1999 said:
die https://ibb.co/c0kwrkhttps://ibb.co/c0kwrkhttps://ibb.co/c0kwrkhttps://ibb.co/c0kwrk
"do you wish to cancel s/w update"
"phone is disconnected from the PC"
I tried already 3 more tutorials
Click to expand...
Click to collapse
Make sure that the cable is good.
The older it is, the more likely it is to cause issues during data transfers.
My suggestion?
Get a new one.
Or, you could borrow one from a friend, but make sure it works on data transfers, not just charging.
I made 2 kdz flashes but the phone still bricks. Rescue data, but all in all install Lineageos- CM RIP. Thank you!
PS: Subject to close:]
by wzsx150. The default is Chinese. English language can be set up.
https://www.lanzous.com/i39m37e
That was pretty fast!
qianjie said:
by wzsx150. The default is Chinese. English language can be set up.
https://www.lanzous.com/i39m37e
Click to expand...
Click to collapse
Amazingly quick!
I get my Mi 9 on Monday. Would flashing magisk via twrp work at stage, or would we need to await a specific root method?
Awesome. Can't wait for my phone to arrive.
cd993 said:
Amazingly quick!
I get my Mi 9 on Monday. Would flashing magisk via twrp work at stage, or would we need to await a specific root method?
Click to expand...
Click to collapse
https://raw.githubusercontent.com/t...uilds/release.json?tdsourcetag=s_pctim_aiomsg
this magisk version can be used
qianjie said:
https://raw.githubusercontent.com/t...uilds/release.json?tdsourcetag=s_pctim_aiomsg
this magisk version can be used
Click to expand...
Click to collapse
Great thanks, looking forward to seeing how people get on with this.
Did anyone flashed it yet?
Yes but it not works 100%, its start recovery mode, you can change landuage nut if you want to flash its impossible as you cant see correct folder and files tree
Laserek_Poland said:
Yes but it not works 100%, its start recovery mode, you can change landuage nut if you want to flash its impossible as you cant see correct folder and files tree
Click to expand...
Click to collapse
I think your data encrypted.
Laserek_Poland said:
Yes but it not works 100%, its start recovery mode, you can change landuage nut if you want to flash its impossible as you cant see correct folder and files tree
Click to expand...
Click to collapse
Can you test my eXtreme Kernel?
xdamami said:
I think your data encrypted.
Click to expand...
Click to collapse
Beside after rebbot to system its back to stock recovery
能否解密date分区
Laserek_Poland said:
Beside after rebbot to system its back to stock recovery
Click to expand...
Click to collapse
Well, without flashing a custom rom, the stock rom will restore the stock recovery.
Anyway, TWRP will be more useful whenever custom roms are available. I have bootloader unlocked, but not in hurry to flash TWRP recovery.
qianjie said:
by wzsx150. The default is Chinese. English language can be set up.
https://www.lanzous.com/i39m37e
Click to expand...
Click to collapse
The Development Section is not for sharing the work of others but posting your own work. Please be sure to read the sticky linked below before posting in the development section:
A message from the moderators - All users please read
THREAD MOVED
Doesn't work. Sets the device name to "xiaomi9" but should be "cepheus", so flashing aborts because of wrong device name.
merlin699 said:
Doesn't work. Sets the device name to "xiaomi9" but should be "cepheus", so flashing aborts because of wrong device name.
Click to expand...
Click to collapse
Change the updater script in the EU rom zip file from "cepheus" to "xiaomi9" and voila, it works.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my MI 9 using Tapatalk
ted presley said:
Change the updater script in the EU rom zip file from "cepheus" to "xiaomi9" and voila, it works. View attachment 4724159
Sent from my MI 9 using Tapatalk
Click to expand...
Click to collapse
Thanks for that, actually I was thinking of something like this. But it would be great if the Recovery could be corrected to the correct device name.
merlin699 said:
Thanks for that, actually I was thinking of something like this. But it would be great if the Recovery could be corrected to the correct device name.
Click to expand...
Click to collapse
That's Xiaomi's fault, just flash EU rom once, the device name will change to "Cepheus" and next EU rom has no problem with that.
ted presley said:
That's Xiaomi's fault, just flash EU rom once, the device name will change to "Cepheus" and next EU rom has no problem with that.
Click to expand...
Click to collapse
cool thank you.
merlin699 said:
cool thank you.
Click to expand...
Click to collapse
But, just my theory, need to test....