Asus TF300T locked at start after restart
pass command
Fast fastboot -i 0x0b05 getvar all
result :
(bootloader) bootloader-version: 1.0
(bootloader) baseband-Version: 2.0
(bootloader) Version: 0.4
(bootloader) SerialNo: 015d24bce643f60c
(bootloader) Mid: 001
(bootloader) product: Cardhu
(bootloader) secure: yes
(bootloader) unlocked: no
(bootloader) uart-on: yes
(bootloader) partition size: bootloader: 0x0000000000800000
(bootloader) partition deviation: bootloader: basic
(bootloader) partition size: recovery: 0x0000000000800000
(bootloader) partition standard: recovery: basic
(bootloader) partition size: boot: 0x0000000000800000
(bootloader) standard partition: boot: basic
(bootloader) partition size: system: 0x0000000030000000
(bootloader) standard partition: system: ext4
(bootloader) partition size: cache: 0x000000001ac00000
(bootloader) partition deviation: cache: ext4
(bootloader) partition size: userdata: 0x00000006e5680000
(bootloader) partition deviation: userdata: ext4
all:
finished. total time: 0.107s
Pass Command:
fastboot flash system -i 0x0B05 blob
result:
erasing 'system' ...
OKAY [1.969s]
sending 'system' (800,931 KB) ...
FAILED (data transfer failure (Unknown error))
finished. total time: 7.159s
I do not know how to restore the source
"wipe data" does not work either
Thanks
Related
I am using Indian version of Moto E XT1022. Unlocked. No Warranty.
I flashed cyanogenmod 12 and was working fine.. I was using cyandelta to update cyanogenmod... Everything was working fine.
yesterday i was downloading new cyanogenmod change using cyandelta. Internal memory became low.. warning message came and phone became very slow.. I restarted the phone..it got stuck in boot.
i went through XDA forum, google and tried to reflash the stock ROM again.
Fastboot able to find my device.
I downloaded RETAIL-DSDS_CONDOR_KXC20.82-14_cid7_CFC_1FF.xml stock ROM and tried to erase and flash again.
D:\android\stock>mfastboot.exe devices
ZX1B32CRVP fastboot
D:\android\stock>mfastboot.exe erase recovery
erasing 'recovery'...
(bootloader) Erase allowed in unlocked state
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 5.024s
D:\android\stock>mfastboot.exe flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.090s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.683s
D:\android\stock>mfastboot.exe flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10280 KB)...
OKAY [ 0.417s]
writing 'recovery'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 19.126s
if i tried to flash partition then i get following error.
1 (bootloader) Preflash validation failed
FAILED (remote failure)
2 (bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery.
getvar all
D:\android\stock>mfastboot.exe getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 500C
(bootloader) product: condor
(bootloader) secure: yes
(bootloader) hwrev: 0x82B0
(bootloader) radio: 0x5
(bootloader) emmc: 4GB Micron REV=06 PRV=12 TYPE=17
(bootloader) ram: 1024MB Elpida S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8210 CS
(bootloader) cid: 0x0007
(bootloader) channelid: 0x40
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 299892736
(bootloader) reason: Last time flashing failed
(bootloader) meid:
(bootloader) date: 05-25-2014
(bootloader) sku: XT1022
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Wed Apr 29 1:48:17 UTC 2015"
(bootloader) ro.build.fingerprint[0]: motorola/condor_retaildsds/condor_
(bootloader) ro.build.fingerprint[1]: umtsds:4.4.4/KXC21.5-40/46:user/re
(bootloader) ro.build.fingerprint[2]: lease-keys
(bootloader) ro.build.version.full[0]: Blur_Version.21.12.40.condor_reta
(bootloader) ro.build.version.full[1]: ildsds.retaildsdsall.en.03
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.020
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-g6bc7ff3 ([email protected]
(bootloader) kernel.version[1]: ilclbld54) (gcc version 4.7 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Tue Jun 24 20:26:22 CDT 2014
(bootloader) sdi.git: sdi.git
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) aboot.git: git=MBM-NG-V50.0C-0-g2259fb8
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe:
(bootloader) ro.carrier: reteu
all: listed above
serialno, ui, imei number is there.
Phone stuck in boot ( M Logo screen)...i am able to go to recovery mode using volume button down..
But from there it is not going anywhere.. i have installed TWRP custom recovery...if i select that option phone stuck in TWRP starting screen. Factory setting/ Noral powerup and other screen stuc in M logo screen.
Please somebody help me... i dont have extra phone...
it would be a great help...if my phone start again.
Thanks
I do not know if I'm posting in the right place but I device (lenovo vibe c2 k10a40) does not unlock the boot loader I type "oem quick unlock" appears 3 points and on the cell phone the volume up button that is sim Is disabled
Here is the getvar
(Bootloader) max-download-size: 0x8000000
(Bootloader) partition size: flashinfo: 1000000
(Bootloader) partition type: flashinfo: raw data
(Bootloader) partition size: userdata: 32000000
(Bootloader) partition type: userdata: ext4
(Bootloader) partition size: cache: 19000000
(Bootloader) partition type: cache: ext4
(Bootloader) partition size: system: c2000000
(Bootloader) partition type: system: ext4
(Bootloader) size of the partition: metadata: 2500000
(Bootloader) partition type: metadata: raw data
(Bootloader) partition size: nvdata: 2000000
(Bootloader) partition type: nvdata: ext4
(Bootloader) partition size: frp: 100000
(Bootloader) partition type: frp: raw data
(Bootloader) partition size: tee2: 500000
(Bootloader) partition type: tee2: raw data
(Bootloader) partition size: tee1: 500000
(Bootloader) partition type: tee1: raw data
(Bootloader) partition size: keystore: 800000
(Bootloader) partition type: keystore: raw data
(Bootloader) partition size: secro: 600000
(Bootloader) partition type: secro: raw data
(Bootloader) partition size: oemkeystore: 200000
(Bootloader) partition type: oemkeystore: raw data
(Bootloader) partition size: seccfg: 80000
(Bootloader) partition type: seccfg: raw data
(Bootloader) partition size: expdb: a00000
(Bootloader) partition type: expdb: raw data
(Bootloader) partition size: logo: 800000
(Bootloader) partition type: logo: raw data
(Bootloader) partition size: recovery: 1000000
(Bootloader) partition type: recovery: raw data
(Bootloader) partition size: boot: 1000000
(Bootloader) partition type: boot: raw data
(Bootloader) partition size: to: 80000
(Bootloader) partition type: for: raw data
(Bootloader) partition size: lk: 80000
(Bootloader) partition type: lk: raw data
(Bootloader) partition size: protect2: a00000
(Bootloader) partition type: protect2: ext4
(Bootloader) partition size: protect1: a00000
(Bootloader) partition type: protect1: ext4
(Bootloader) partition size: nvram: 500000
(Bootloader) partition type: nvram: raw data
(Bootloader) partition size: proinfo: 300000
(Bootloader) partition type: proinfo: raw data
(Bootloader) partition size: preloader: 40000
(Bootloader) partition type: preloader: raw data
(Bootloader) off-mode-charge: 1
(Bootloader) warranty: yes
(Bootloader) unlocked: no
(Bootloader) safe: yes
(Bootloader) kernel: lk
(Bootloader) product: LCSH6735M_35U_M
(Bootloader) pre-loader version: 0.1.00
(Bootloader) version: 0.5
All done !!
Finished. Total Time: 0.05s
Thank you very much in advance
Sorry, I'm Brazilian and I'm using google translate
LG-D415 stuck in fastboot No operating system installed. ( I think)
To make long story short was stuck in recovery (due to 14.1 issue) tried the twrp3.2.1-0mako.img solution but somewhere (hard to nail down) hit reboot before I had installed a rom. Now stuck in fastboot. Have tried many different ways to get system but none work. Need help with fastboot and partitions getvar:slot . Here is what I can get from the phone as info:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot boot recovery.im
downloading 'boot.img'...
OKAY [ 0.438s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.444s
C:\Program Files (x86)\Minimal ADB and Fastboot> fastboot getvar all
(bootloader) display-panel:
(bootloader) charger-screen-enabled: 0
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:cache: 0x38400000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:userdata: 0x102180400
(bootloader) partition-type:system: ext4
(bootloader) partition-size:system: 0x80000000
(bootloader) unlocked: yes
(bootloader) secure-boot: yes
(bootloader) version-hardware: rev_10
(bootloader) variant: w7_tmo_us Samsung 8GB
(bootloader) serialno: LGD415e09994e6
(bootloader) kernel: lk
(bootloader) product: W7_TMO_US
all:
finished. total time: 0.050s
all commands except this one and list devices have failed
hello, my first name is jonathan, i'm french.
I have an amazfit stratos 3 watch, Chinese version.
I have a problem unlocking the bootloader.
----------------------------------------------------------------
Microsoft Windows [version 10.0.18363.592]
(c) 2019 Microsoft Corporation. Tous droits réservés.
C:\adb>fastboot reboot
rebooting...
finished. total time: 0.016s
C:\adb>adb devices
List of devices attached
11ee2611 device
C:\adb>adb shell reboot bootloader
C:\adb>fastboot oem unlock d144d5a285c0b53aeb2ee359bb7a2ee9
< waiting for device >
...
OKAY [ 0.047s]
finished. total time: 0.047s
C:\adb>fastboot getvar unlocked
unlocked: no
finished. total time: 0.016s
---------------------------------------
the code is good but the bootloader does not want to unlock
C:\adb>adb shell reboot bootloader
C:\adb>fastboot getvar all
(bootloader) version-bootloader: U-Boot 2013.07-g43d9f8c
(bootloader) version-baseband: N/A
(bootloader) version-hardware: V1.1 20130322
(bootloader) version-cdma: N/A
(bootloader) variant: watch
(bootloader) serialno: 19281943******
(bootloader) product: watch
(bootloader) secure: yes
(bootloader) unlocked: no
(bootloader) uart-on: NO
(bootloader) partition-size:bootloader: 0x0000
(bootloader) partition-type:bootloader: emmc
(bootloader) partition-size:recovery: 0x1000
(bootloader) partition-type:recovery: emmc
(bootloader) partition-size:boot: 0x2000
(bootloader) partition-type:boot: emmc
(bootloader) partition-size:system: 0x3000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:cache: 0x4000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:userdata: 0x5000
(bootloader) partition-type:userdata: ext4
(bootloader) max-download-size: 0x4000000
all:
finished. total time: 0.156s
C:\adb>
Try this:
In the case of ROM China the code must be inserted with a slash after the first 5 numbers (for example 12345 / 12345678);
How to unlock the bootloader on Amazfit Pace, Stratos and Verge
In this guide we explain how to unlock the bootloader on Amazfit devices, so you can install custom ROM.
en.gizchina.it
Hi I encountered the following error while installing the Custom ROM (TWRP.img).
-----------------------------------------------------------------------------
G:\Mobile\Xiaomi\MiA3\Rom>fastboot flash boot twrp.img
target reported max download size of 804261888 bytes
sending 'bootb' (39892 KB)...
OKAY [ 1.272s]
writing 'bootb'...
FAILED (remote: (bootb_b) No such partition)
finished. total time: 1.272s
--------------------------------------------------------------------
This is also the case with variables :
(bootloader) partition-type:ssd:raw
(bootloader) partition-size:ssd: 0x2000
(bootloader) has-slot:modem:yes
(bootloader) has-slot:system:yes
(bootloader) current-slot:b
(bootloader) has-slot:boot:yes
(bootloader) slot-retry-count:b:2
(bootloader) slot-unbootable:b:no
(bootloader) slot-successful:b:no
(bootloader) slot-retry-count:a:7
(bootloader) slot-unbootable:a:no
(bootloader) slot-successful:a:no
(bootloader) slot-count:2
(bootloader) secure:yes
(bootloader) serialno:9642e81843bf
(bootloader) product:laurel_sprout
(bootloader) max-download-size:804261888
(bootloader) kernel:uefi
all:
finished. total time: 0.617s
------------------------------------------------------
How to return 2 specified statuses to yes
please guide me
When using custom recovery, ROM, you should set boot slot to A first, don't flash into slot B