Related
.
This is the place for Q&A, general discussions, and post-installation chat about JasmineROM. Please keep your personal issues that are not related to the development, such as themes and other stuff, here.
.
Looks great. Will drive it for a few days and report back if there's any issues.
Thanks for all of your hard work & our 1st ROM.
Will be a version for the D855 ?
drmspidi said:
Will be a version for the D855 ?
Click to expand...
Click to collapse
I don't have this device, but you may test it yourself. Make nandroid backup, clean flash & report me back! It doesn't flash any firmware images (kernel, modem, ... etc); so, it's safe to test on other devices. If you've any issues, you can restore your backup.
DPI Affect
Heard mention that the DPI change affects the quick circle case display......is this true, or would it affect this? If it does change, what can be done post flashing to regain quick circle proper display?
Thanks for the work, btw!!!
hsbadr said:
I don't have this device, but you may test it yourself. Make nandroid backup, clean flash & report me back! It doesn't flash any firmware images (kernel, modem, ... etc); so, it's safe to test on other devices. If you've any issues, you can restore your backup.
Click to expand...
Click to collapse
But isn' t only for Verizon ?
What kind of problem I may have ?
JasmineRom
drmspidi said:
But isn' t only for Verizon ?
What kind of problem I may have ?
Click to expand...
Click to collapse
Yes this Rom is for the Verizon VS985 variant but he just stated that it does not flash a kernel, modem, or recovery of any sort. So the worst thing that may happen is your device bootloops or you just may not have data, working WiFi or Bluetooth, or some other minor issue. It is relatively safe to flash on other devices to try so long as you have a Nandroid backup of a working or stock ROM.
willyjay said:
Heard mention that the DPI change affects the quick circle case display......is this true, or would it affect this? If it does change, what can be done post flashing to regain quick circle proper display?
Thanks for the work, btw!!!
Click to expand...
Click to collapse
It works fine for me, but I can create a flashable zip to revert to stock DPI, if needed.
drmspidi said:
But isn' t only for Verizon ?
Click to expand...
Click to collapse
Yes, some Verizon devices may work on other carriers.
drmspidi said:
What kind of problem I may have ?
Click to expand...
Click to collapse
Unpredictable, it may work perfect or with issues related to hardware drivers: mainly Mobile Data, WiFi, bluetooth, ... etc. It could be fixed though with a converter replacements (port).
acparker18 said:
Yes this Rom is for the Verizon VS985 variant but he just stated that it does not flash a kernel, modem, or recovery of any sort. So the worst thing that may happen is your device bootloops or you just may not have data, working WiFi or Bluetooth, or some other minor issue. It is relatively safe to flash on other devices to try so long as you have a Nandroid backup of a working or stock ROM.
Click to expand...
Click to collapse
Exactly.
add ons
Do you think you will be adding volume enhancements soon?
Loving the Rom. Just needs themes and home back up and restore enabled
Saw that you would be pushing 1.0.1 update for tether. Will this just be an update zip or will it require a full rom flash?
USB Debugging Doesn't Stick After Reboot
I attempted to get USB Debugging to stick after rebooting by adding this line to build.prop:
persist.service.adb.enable=1
I reset the permissions to rw-r-r after editing build.prop before I rebooted. No luck, still not remaining enabled after a reboot.
lawtalking said:
Saw that you would be pushing 1.0.1 update for tether. Will this just be an update zip or will it require a full rom flash?
Click to expand...
Click to collapse
1.01 or 1.1 will be an update zip to dirty flash...
The Great Dahli llama said:
I attempted to get USB Debugging to stick after rebooting by adding this line to build.prop:
persist.service.adb.enable=1
I reset the permissions to rw-r-r after editing build.prop before I rebooted. No luck, still not remaining enabled after a reboot.
Click to expand...
Click to collapse
I'm aware of this issues...
I hope you can get Aroma working later on. The only downside is the size of the rom for download. The only bloat I find useful on this phone is multi window, knock on, and the clipboard. I hope to see some kind of volume enhancement as well.
wes53177 said:
Do you think you will be adding volume enhancements soon?
Click to expand...
Click to collapse
jerbear2011 said:
Loving the Rom. Just needs themes and home back up and restore enabled
Click to expand...
Click to collapse
eraursls1984 said:
I hope you can get Aroma working later on. The only downside is the size of the rom for download. The only bloat I find useful on this phone is multi window, knock on, and the clipboard. I hope to see some kind of volume enhancement as well.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Sure, at some point a new release of JasmineROM will include all requested features
Oh also the Verizon variants messaging app doesn't allow you to choose vibe pattern if there's a way you could enable that it would be awesome.
Sent from my Bump'd VS985 4G
I've got the itch to do a bit of themeing. Do you guys use the G3 TweaksBox themes? Im considering building for that since it is cross ROM compatible.
It will be a black/grey/orange theme using the Numix Cinnamon theme as inspiration.
Would there be an issue if I change the DPI to the original value.
I don't like the one with the ROM, and I can't get used to it.
What would be the best way to go about it?
jerbear2011 said:
Oh also the Verizon variants messaging app doesn't allow you to choose vibe pattern if there's a way you could enable that it would be awesome.
Click to expand...
Click to collapse
will look into it...
PiousInquisitor said:
I've got the itch to do a bit of themeing. Do you guys use the G3 TweaksBox themes? Im considering building for that since it is cross ROM compatible.
It will be a black/grey/orange theme using the Numix Cinnamon theme as inspiration.
Click to expand...
Click to collapse
Most apps/themes should work with this ROM since it's deodexed, except carrier-related apps: messaging, *telephony*, ... etc. I'll make my own themes & a list of compatible themes later.
Umbrella Corp said:
Would there be an issue if I change the DPI to the original value.
I don't like the one with the ROM, and I can't get used to it.
What would be the best way to go about it?
Click to expand...
Click to collapse
1.0.1 includes what you want; http://forum.xda-developers.com/showpost.php?p=56028380&postcount=129
This ROM ROCKS!!!! Thx!!!!
ODEX + DEODEX ROM made from D620R .kdz firmware
HTML:
* your warranty is now void.
*
* i am not responsible for bricked devices, dead sd cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this rom
* before flashing it! You are choosing to make these modifications, and if
* you point the finger at me for messing up your device, i will laugh at you.
-- This is my first rom, that I build from scratch using several guides on xda I hope that it will jump start development for our lovely phone and provide more data and useful files to ongoing custom roms. You can use this rom to make CUSTOM STOCK ROM's, and it would be nice if you mentioned me as source for your rom
-- I didn't test it since my phone is not rotted yet and I didn't unlock bootloader I hope that you will test this rom, since I didn't change anything from stock and I just extracted it and made odex and deodexed version.
Next thing I plan is to root and unlock bootloader on my phone and to try to use G3 theme and apps from G2 stock roms I will keep you updated as times goes bye, but you are free to do it on your own since I don't know when will I have time since holidays are coming
Steps of extracting rom:
1. I have used first 8 steps from this thread:
http://forum.xda-developers.com/showpost.php?p=50743197&postcount=1
2. After that I have made flashable zip using step 3 from:
http://forum.xda-developers.com/showpost.php?p=54935317&postcount=1
3. system.img is in ext2 format, so I used Ext2Explore to extract all the folders
http://forum.xda-developers.com/showpost.php?p=41818037&postcount=1
4. Rom is now in ODEX form, so I needed to DEODEX it:
http://forum.xda-developers.com/showpost.php?p=53004485&postcount=1
Click to expand...
Click to collapse
FEATURES:
- Based on D620R10E_00.kdz
- Without Root
- Odex and Deodex versions
Click to expand...
Click to collapse
I HAVE REMOVED DOWNLOAD LINKS UNTIL I RESOLVE /SYSTEM error
-------------------------------------------------------------------------------------------------------------
Please test it and report back, every bit of help is appreciated And I hope we can start making new ROM's for our phone
Thank you wall
@somboons .kdz to system.img extracting tutorial
@k2wl .kdz to system.img extracting tutorial
@GethPrime EXT2 explorer
@umair928 KK DEODEX
Click to expand...
Click to collapse
reserved
gonna try It this afternoon
download speed is too slow. maybe i try it tomorrow
can i ask? how can i deodexed my stock rom D618? thanks
System_F said:
gonna try It this afternoon
download speed is too slow. maybe i try it tomorrow
Click to expand...
Click to collapse
I tried to download it from work and from home, and I had maximum download speed (1mb and 4mb ), I will try to upload it to faster server today/tomorow.
restuesaputra said:
can i ask? how can i deodexed my stock rom D618? thanks
Click to expand...
Click to collapse
All the steps are in the first post
This is for flash in cwm for example?
doloresmiska said:
This is for flash in cwm for example?
Click to expand...
Click to collapse
Yes it is
Next week I will root and unlock bootloader on my phone, and then try to make stock rom with G3 apps
I have problem. I wanted flash this ROM but in twrp i was an error "Can't mount /system". After this, my system came bootloop... i dont know what i doing wrong. (I flash this from Crystal PA rom).
Since author dont test it dont flash this rom. I dont see any point to publish the untested rom.
doloresmiska said:
I have problem. I wanted flash this ROM but in twrp i was an error "Can't mount /system". After this, my system came bootloop... i dont know what i doing wrong. (I flash this from Crystal PA rom).
Click to expand...
Click to collapse
Sorry to hear that, I hoped that it ould work from the start, since I didn't do any modification. I will try it myself next week and report if I succeed in making it work without problem
partyzant_x said:
Since author dont test it dont flash this rom. I dont see any point to publish the untested rom.
Click to expand...
Click to collapse
I have published it as my first try of making ROM, and as potential source of drivers and modules for other developers
I have found out that my update script in METAINF folder was missing, that is why /system was not mounted. I have fixed it, and I will test it in 1-2 days. So if everything works we will have flashable stock ROM
test it first pls
doloresmiska said:
test it first pls
Click to expand...
Click to collapse
I will there will not be any links until I test it
i have a working build... what i need to do?
Post it here or create a new thread?
System_F said:
i have a working build... what i need to do?
Post it here or create a new thread?
Click to expand...
Click to collapse
Since you made working build, it is better to make your on thread.... It is your work
I made build that probably works, but I didn't have time to test it.
I will close my thread
predragiPredrag said:
Since you made working build, it is better to make your on thread.... It is your work
I made build that probably works, but I didn't have time to test it.
I will close my thread
Click to expand...
Click to collapse
Ok, thanks for info!
woks with g2 mini d625?
sergio2801 said:
woks with g2 mini d625?
Click to expand...
Click to collapse
No it does not work. There is still no ROMs for D625
sergio2801 said:
woks with g2 mini d625?
Click to expand...
Click to collapse
This is only stock ROM ...
Got any further with fixing the system error?
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
I introduce you Resurrection Remix for F400S/K/L (Korean G3 variants)
Resurrection ROM Changelog
Weekly Build Changelog
* NOTE *
You can find Official version of RR by other maintainer HERE
Working
- Everything.
Not Working
- None for now (Please report).
Attention:
- If you need specific model name for your device (F400S/K/L), please change model name in build.prop into yours using root explorer or something equivalent.
Requirements
- Working TWRP (Download from Here)
Installation
- Reboot into recovery.
- Backup your current ROM.
- Wipe System/Data/Cache partition.
- Flash Rom.
- (Optional) Flash lollipop baseband for your device.
- Flash GApps.
- Reboot and Enjoy!
Download
Note: If you're trying to upgrade from last version, then you have to CLEAN install, not DIRTY install!
ROM
Baseband for F400K (v20n)
GApps
OpenGApps
Magisk (for rootless builds)
Magisk
Previous Version
Previous versions can be found HERE
If you like the post, it would be great for pressing the donate to me button!
Aww ... That is great too
It doesent work on F400L? No network?
Thanks! It´s working pretty good so far (F400S).
Full wipe, flashed ROM, flashed F400S baseband, GApps, SuperSU, HTC M9 Camera (found somewhere in XDA), installed Blinkfeed (my favourite launcher) and many other apps, everything is fine for now.
rixz59 said:
It doesent work on F400L? No network?
Click to expand...
Click to collapse
Data works.
@fprhqkrtk303: This rom is working perfect but have a little bug. It's not sound when the device is booting. How to enable sound when the device boot? Please give me advice. Thanks!
P/s: Sorry for my bad English.
ferluci said:
Thanks! It´s working pretty good so far (F400S).
Full wipe, flashed ROM, flashed F400S baseband, GApps, SuperSU, HTC M9 Camera (found somewhere in XDA), installed Blinkfeed (my favourite launcher) and many other apps, everything is fine for now.
Click to expand...
Click to collapse
Where can i find the f400s baseband ??
osa993ma said:
Where can i find the f400s baseband ??
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=95916177934545905
Where can I find supersu to flash?
This one?: http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
KingOfDope said:
Where can I find supersu to flash?
This one?: http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
Click to expand...
Click to collapse
Yes, that one.
I've been using this ROM for almost one week and I experience sudden freezes. It happens all of a sudden and I don't know what's causing it. Kernel panic perhaps? I'm going to go back to Stock because it freezes a lot. I always have to remove the battery in order to use it again.
KingOfDope said:
Where can I find supersu to flash?
This one?: http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
Click to expand...
Click to collapse
You do not need to flash supersu it is already installed just activate it from "developer options" then install supersu app from playstore
---------- Post added at 06:28 AM ---------- Previous post was at 06:26 AM ----------
maikeru-chan said:
I've been using this ROM for almost one week and I experience sudden freezes. It happens all of a sudden and I don't know what's causing it. Kernel panic perhaps? I'm going to go back to Stock because it freezes a lot. I always have to remove the battery in order to use it again.
Click to expand...
Click to collapse
I used this rom for sometime and it was veey smooth , so did you made full wipe and cache wipe ??
maikeru-chan said:
I've been using this ROM for almost one week and I experience sudden freezes. It happens all of a sudden and I don't know what's causing it. Kernel panic perhaps? I'm going to go back to Stock because it freezes a lot. I always have to remove the battery in order to use it again.
Click to expand...
Click to collapse
I haven't suffered any freezing using this rom. Maybe the application crash can be reason. Wipe cache/dalvik and try again.
Wow, just flash ver 17/5/15 yesterday and now 20/5/15. Very hard work mate, tks for support us.
Hi mate, can you help me plz? I use your kernel and flash with other ROM and it work perfectly, i got data connection and everything work but wifi not work. Can you inbox me a flashable file fox wifi fix or instruct me how to do it...
Update please
vntf201a said:
Hi mate, can you help me plz? I use your kernel and flash with other ROM and it work perfectly, i got data connection and everything work but wifi not work. Can you inbox me a flashable file fox wifi fix or instruct me how to do it...
Click to expand...
Click to collapse
No wifi fix available. Does wifi work on other rom?
rixz59 said:
Update please
Click to expand...
Click to collapse
Updated.
fprhqkrtk303 said:
Updated.
Click to expand...
Click to collapse
Thanks a lot, I really love this rom. ???
fprhqkrtk303 said:
No wifi fix available. Does wifi work on other rom?
Click to expand...
Click to collapse
No rom work. but kernel in your rom work with all other AOSP or CM rom. Please check other rom with your kernel, it will help you support more ROM. (Just wifi break, all other feature work.)
OTA:
https://www.dropbox.com/s/ypkxopxn7ex69i7/OnePlus2Oxygen_14_OTA_006-008_patch_1509191929.zip?dl=0
https://www.androidfilehost.com/?fid=24052804347819827
Taken from: https://forums.oneplus.net/threads/oxygenos-2-1-0-ota-roll-out-starting-now.369934/
Here are some highlights:
We've added manual mode for all you photography enthusiasts. Hope this will give you more control for capturing that perfect moment.
Raw support is now enabled for 3rd party camera apps that support this format
There's a new color balance slider in Display for adjusting the color tone of your screen. You can now go warmer or cooler as you please.
Added Exchange support.
We fixed some issues that were causing problems with popular 3rd party apps.
Telephony service improvements so you no longer get the lag when you turn on/off airplane mode.
uh...can anyone confirm this?
Anyone tried to install this with TWRP?
Its one oneplus 2's forum if you want to check
I just did it with the stock recovery and it went smooth.
Alaris said:
Its one oneplus 2's forum if you want to check
Click to expand...
Click to collapse
i just did, I can't find anything. Link?
yellowsn0w said:
i just did, I can't find anything. Link?
Click to expand...
Click to collapse
https://forums.oneplus.net/threads/oxygenos-2-1-0-ota-roll-out-starting-now.369934/
Alaris said:
https://forums.oneplus.net/threads/oxygenos-2-1-0-ota-roll-out-starting-now.369934/
Click to expand...
Click to collapse
Yeah i just saw it, cool. The changes are kind of useless though...did they do any lag/battery improvements?
The did say bug fixes so I am hoping for the best lol. Would love to get the Bluetooth issues I am having resolved.
im guessing i have to reflash 2.0.2 to unroot and then flash the zip in twrp and then flash supersu again right?
I'm going to install it. Can't wait!
yellowsn0w said:
im guessing i have to reflash 2.0.2 to unroot and then flash the zip in twrp and then flash supersu again right?
Click to expand...
Click to collapse
I am not rooted but some people mentioned that if you flash it with twrp you just have to re-root after.
I can tell you it does feel a little bit snappier, hitting the home button looks like it closes apps faster then before.
Alaris said:
I am not rooted but some people mentioned that if you flash it with twrp you just have to re-root after.
Click to expand...
Click to collapse
Scratch that someone on the oneplus forum said it is not flashing through twrp.
Alaris said:
Scratch that someone on the oneplus forum said it is not flashing through twrp.
Click to expand...
Click to collapse
the way you had to install 2.0.2 was to reflash 2.0.1 to get rid of root FIRST (otherwise it will fail to flash because of root), then flash 2.0.2 and then supersu. So probably gotta do that again
Will wait for the full zip then
ogriff said:
Will wait for the full zip then
Click to expand...
Click to collapse
Same here.
Can anyone share the link of the full zip here should you bump into it?
Thanks in advance!
EDIT* Found it: https://www.androidfilehost.com/?fid=24052804347820312
Just installed successfully with stock recovery - thanks OP for posting!
Ugh google maps landscape issue and double sms bug are still there.
Yeah I had to switch from Messenger to Hangouts due to the double SMS thing.
I am not responsible for exploding devices!! Nothing should go wrong, as this doesn't touch anything super-sensitive, but just in case...
Tested on Pure Nexus w/ Pure Nexus dynamic gapps. This should also work with Open GApps. (And I guess Fake Nexus, though I think the camera works well out-of-the-box on that one...?)
On (most?) current Nexus 5 Nougat ROMs, attempting to take a photo via Google Camera with HDR+ will just take a regular photo. (The included stock camera doesn't even have an HDR+ option!) The "fix" is to downgrade to an older version (2.8) of Google Camera.
Problem is, that's kind of annoying. In addition, the Play Store will keep trying to update it to the newest version unless you re-sign. Not good!
So I made a flashable zip! Just pop it onto your SD card, flash in TWRP, and the proper Google Camera will be installed, signed with a custom key to prevent the Play Store from updating it.
Enjoy!
NOTE: This does not fix the video recording issues, only the HDR+ not working. You still need to use stock camera for videos.
Changelog
11/30/2016 - Fix an extraction failure when the path to the zip has spaces, and fix the progress bar.
11/29/2016 - Fix stupid zip signing mistake.
11/28/2016 - Initial version.
Going to try it on Nitrogen OS
Yeah it's not actually a fix for the non working hdr+, it's just another workaround. But great for the people who need it! I just wouldn't call it fix for Google camera on nougar.
Enviado desde mi Nexus 5 mediante Tapatalk
Error : unable to extract zip (on TWRP 3.0.2)
Tried to install on aosp 7.1 ROM...and I want to add one more thing that Im not able to find google camera in play store on this ROM.
Thanks for the apk in the zip...I was able to install it manually.
is this google camera version 4.2?
Bad_Calzoncillos said:
Yeah it's not actually a fix for the non working hdr+, it's just another workaround. But great for the people who need it! I just wouldn't call it fix for Google camera on nougar.
Enviado desde mi Nexus 5 mediante Tapatalk
Click to expand...
Click to collapse
True. At the same time, a [WORKAROUND] tag isn't allowed, so that's why I used [FIX].
amarendar94 said:
Error : unable to extract zip (on TWRP 3.0.2)
Tried to install on aosp 7.1 ROM...and I want to add one more thing that Im not able to find google camera in play store on this ROM.
Thanks for the apk in the zip...I was able to install it manually.
Click to expand...
Click to collapse
Sorry about that! I just updated the zip file again. I had made a mistake with regards to the way it was signed.
It should work now. If it doesn't, could you hit Copy Log inside the Advanced section of TWRP and then upload
Code:
/sdcard/recovery.log
here?
aslam_ said:
is this google camera version 4.2?
Click to expand...
Click to collapse
No, it's 2.8. 4.2's HDR+ doesn't work on the Nexus 5 Nougat ROMs.
I uninstalled v4 . then flashed 3.2 and unchecked google camera automatic update from playstore ( right up corner) . why to downgrade to v2.8 if v3.2 also work?
Mairo said:
I uninstalled v4 . then flashed 3.2 and unchecked google camera automatic update from playstore ( right up corner) . why to downgrade to v2.8 if v3.2 also work?
Click to expand...
Click to collapse
Huh...on my device, 3.2 HDR+ still didn't work.
Also, for me, I already have auto-update off, but I usually just like to click "UPDATE ALL" without the camera updating, too.
refi64 said:
Huh...on my device, 3.2 HDR+ still didn't work.
Also, for me, I already have auto-update off, but I usually just like to click "UPDATE ALL" without the camera updating, too.
Click to expand...
Click to collapse
ROM issue maybe. Im currently using Fake Nexus ROM and 3.2 HDR worked fine.
This isnt actually a fix, for me GCam 3.2 works on Nougat with HDR+
refi64 said:
Sorry about that! I just updated the zip file again. I had made a mistake with regards to the way it was signed.
It should work now. If it doesn't, could you hit Copy Log inside the Advanced section of TWRP and then upload here?
Click to expand...
Click to collapse
I think u should test the zip on your phone b4 posting here..
Anyways here is the log u asked for
amarendar94 said:
I think u should test the zip on your phone b4 posting here..
Anyways here is the log u asked for
Click to expand...
Click to collapse
That's the weird part; I did test it...
That error is definitely weird... Out of curiosity, what did you name the zip file when you saved it?
refi64 said:
That's the weird part; I did test it...
That error is definitely weird... Out of curiosity, what did you name the zip file when you saved it?
Click to expand...
Click to collapse
Didn't rename it...I just saved it with what you name d it.
refi64 said:
Huh...on my device, 3.2 HDR+ still didn't work.
Also, for me, I already have auto-update off, but I usually just like to click "UPDATE ALL" without the camera updating, too.
Click to expand...
Click to collapse
Ok. I noticed now that video don' t work . green flicker if i look after recording. But hdr works great.
Anyway video have been always crap in our device, so i don´t use it.
amarendar94 said:
Didn't rename it...I just saved it with what you name d it.
Click to expand...
Click to collapse
Just figured it out. I updated the zip again; it should work perfectly now!
I'm on Nitrogen-os 7.1 and gcam 3.2 workshop fine
First cam uploaded works perfectly on aicp 7.1 rom.
Hdr and video.
Does not work on my Nexus 5 ABCrom_nexus_hammerhead-7.0-20161129.zip
As soon as I enable HDR+, the app force closes.
Could it be a conflict with the already installed camera?
Cheers