[Q] Zenfone 2 Bricked or Stuck at fastboot need FIX ASAP - Android Q&A, Help & Troubleshooting

So, i have root my phone, i directly deleted most of asus's bloatwares. Few days after that, the google search app started to force stop, with that i just tried to restart my phone. Amazingly, it cant start, i was stuck at a dead android logo, and it said error. I went to recovery, and unaccidentally pressed the clear cache. After it reboots, still no changes, i went to recovey, i cant(i know how to enter recovery), I CANT ENTER RECOVERY ANYMORE.
So i tried to clear cache via adb. Device undetected. Usb debugging should be on, cause i root this phone via adb too. Driver have been installed properly, but no devices were detected.
Summary
1.rooted
2.error>reboot
3.clear cache
4.enter recovery again>failed
5.try using adb, device failed to be detected.
In this state. I cant progress. HELP

Related

[Q] Bootloop, Cant seem to fix it.

I'm new to rooting and all of this type of thing, i figured I would first start with my HTC Flyer. I successfully unlocked the bootloader, and installed SuperUser, upon installing greenify and i tried to install the Xposed Framework, and my device now is stuck in a boot loop.
When enter the bootloader and do a factory reset or try to enter factory it completely freezes, and when i try to connect it to my PC via fastboot the PC says that the USB device that is connected cannot be recognized and fastboot will not work. Did i completely fry this device? Also if you have time I couldnt figure out a proper way to flash a custom rom so if anyone has a guide for that I would appreciate a link to that as well.
Thank you so much!!

[Q] Stuck in whitescreen after boot / No ADB connection

Please HELP!
Yesterday I flashed my Odys Xelio (Allwinner A10) with CWM. After booting in a working state, I restarted in Recovery too full whipe and whipe dalvik, I installed gapps ans the compatibility.zip also from CWM.
After that I got stuck in a whitescreen. I can not access anything, not even CWM recovery anymore. In win 8 I only could see 1 to 2 undefined devices (should be a problem with the device AND a driver issue).
In Linux I could see a device in adb yesterday and could put it into "adb reboot recovery". Still whitescreen on the tablet, but I could push a recovery file with adb to the /sdcard/. Rebooting didn't bring me to another state.
Today I am not able to connect via adb. It always tells me "List of devices attached" and an empty list.
Display should be okay, no cable issue or sth. else. I really hope someone can help. Perhaps theres a way to JTAG the devices or there is a trick with pressing some buttons and using the USB cable...
BTW: While booting into CarbonRom the first time, the button-behaviour was strange or even totally not working. Perhaps that's a point?
THX in advance
EDIT: Now, after playing around with a needle into a "reset-hole" I finally found a way to see the device in adb. How do I go on!?

[Q] Please help! bootlooping without ADB enabled NEXUS 4

Hi guys,
I have read all the other posts and they didn't seem to help my problem.
my phone started to bootloop, and i didn't enable ADB debug before. (Tried flashing, says device is locked, tried unlocking, says it needs adb to be on) =.=
i tried factory reset + clear cache in recovery mode => not working
Tried SDK tool -> doesn't recognize devce b/c adb is not on
I just want to know what can I do!?
Please help me! T.T:crying::crying::crying::crying:

Another LG L9 brick..(Can't get to fastboot)

Hi!
I'm so stupid. I wanted to install cm12.1. So I rooted phone, unlocked BL. Then, I had first problem - when executing adb oem-unlock BL has unlocked and phone go to fastboot. But my comp couldn't recognize it (heard plugging in and out sound repeatedly). And here comes my "stupidity". I installed flashify and flashed CWM by it, got to CWM, installed cm12.1 zip. Of course wiped all data. Because I didn't flashed boot.img cm12.1 was freezing on fist setting up screen (nothing was working, just power button - pushing 10s turned off phone).
I wanted to flash boot.img by fastboot. But I still had problems with drivers(omap4boot didn't work). So I tried to recovery system by LG Mobile Support Tool. Everything got fine, but then phone stuck on the LG logo.
S/W Uprgade mode works of course, but I can't get to recovery now.
I'm using Windows 8.1
Any ideas?
Edit.
Ok, so I tried to install omap again. I did it, but the phone is still repeatedly conecting and disconnecting and in device manager I cought omap4430 driver whith waring mark for a while. Any ideas now?
Is it the non-animated LG logo?
This should work:
http://forum.xda-developers.com/showthread.php?t=2748384
The download links for the firmware are probably not up to date. Use this to download: http://forum.xda-developers.com/showthread.php?t=2287573
If your phone still goes beyond the non-animated logo, there might be easier solutions.
It was after animation.
Anyway, I have finally solved this problem by installing new system using Bride's solution with full wipe.

Wiko rainbow 4G not starting; bootloop/softbrick, cannot install new software.

Hi there,
I have a problem with my wiko rainbow 4G, it's soft-bricked.
This happend while i was trying to update the software (normal notification, official update). It just rebooted into recovery.
I'm stuck there now and tried several thing like: adb side-load (transfers files, but always returns: intallation aborted, Updating from sd card (same error), factory reset and clear cache did nothing.
While in recovery my phone only shows up as an sideload adb device (in adb interface). I don't know how to get into fastboot to install custom recovery either, tried both power + up and/or down volume buttons.
Also most guides ask me to use a flash tool, but these don't do anything. The official software doesn't detect the phone (neither in normal, sideload or recovery state.
I am left clueless, please help
Thanks

Categories

Resources