Hi!
I have a ANT+ frequency band. I tried to enable it but Endomondo says "not compatible with your phone". I have the CM12.1. Any idea to enable it?
Thanks
I don't think this phone has ANT+ support, why do you think it has?
In the very first AOSP roms based on 5.0.2 there was ANT+ support.
If possible I like to activate this, and leave at home my Garmin watch when I go for a run
Crim Soukyuu said:
I don't think this phone has ANT+ support, why do you think it has?
Click to expand...
Click to collapse
The Redmi Note 2 uses the MT6795 Mediatek processor. According with Mediatek this processor has ANT+ support:
Features
64-bit True Octa-core™ LTE SoC with clock speed up to 2.2GHz
MediaTek CorePilot™ unlocking the full power of all eight cores
Dual-channel LPDDR3 memory clocked at 933MHz
2K on device display (2560x1600)
120Hz mobile display with Response Time Enhancement Technology and MediaTek ClearMotion™
480fps 1080p Full HD Super-Slow Motion video feature
Integrated, low-power hardware support for H.265 Ultra HD (4K2K) video record & playback
Ultra HD video playback support for H.264 & VP9, as well as for graphics-intensive games and apps
Support for Rel. 9, Category 4 FDD and TDD LTE (150Mbps/50Mbps), as well as modems for 2G/3G networks
Support for Wi-Fi 802.11ac/Bluetooth®/FM/GPS/Glonass/Beidou/ANT+
Multi-mode wireless charging supported by MediaTek’s companion multi-mode wireless power receiver IC
Click to expand...
Click to collapse
However, Xiaomi doesn't give support to ANT+. At least at the MIUI roms.
So if the processor has the support to ANT+, then with a firmware it could support ANT+ devices. A possible solution... download a CM12.1 code and an ANT+ controller code:
Is it possible this solution?
P.D. Sorry for my English. I'm not native English speaker
Related
Hi,
I recently bought Micromax A85(pasted the specs at the end). It has tegra 2 processor. I want to port ICS or atleast GB to it. tried some stock roms of tegra 2 with nvflash, doesnt boot. Want to build from source but i dont have the device's kernel source code, the manufacturer didnt made it open source. I read the guides on android source site and downloaded the source on ubuntu 10.04.
Need your help to get started with the development, need basic guide which will tell how to start on a new device of which we dont have the kernel source.
specs of the device:
GENERAL 2G Network GSM 850 / 900 / 1800 / 1900
Announced 2011, Q3
Status Available. Released 2011, October
BODY Dimensions 118.7 x 60.1 x 13.8 mm
Weight -
- Touch-sensitive controls
DISPLAY Type TFT capacitive touchscreen
Size 480 x 800 pixels, 3.8 inches (~246 ppi pixel density)
SOUND Alert types Vibration, Polyphonic(64), MP3 ringtones
Loudspeaker Yes
3.5mm jack Yes
MEMORY Card slot microSD, up to 32GB, buy memory
Internal 8 GB storage, 512 MB RAM
DATA GPRS Yes
EDGE Yes
Speed HSDPA, HSUPA
WLAN Wi-Fi 802.11 b/g/n, Wi-Fi hotspot
Bluetooth Yes
USB Yes, microUSB v2.0
CAMERA Primary 5 MP, 2592х1944 pixels, autofocus
Features Geo-tagging
Video Yes
Secondary Yes, VGA
FEATURES OS Android OS, v2.2 (Froyo)
Chipset Nvidia Tegra 2 AP20H
CPU Dual-core 1 GHz Cortex-A9
GPU ULP GeForce
Sensors Accelerometer, proximity, compass
Messaging SMS(threaded view), MMS, Email, Push Email, IM
Browser WAP 2.0/xHTML, HTML, Adobe Flash
Radio Stereo FM radio with RDS
GPS Yes, with A-GPS support
Java Yes, via Java MIDP emulator
Colors Black
- SNS applications
- MP3/WAV/AAC player
- MP4/H.263 player
- Organizer
- Image/video editor
- Document editor (Word, Excel, PowerPoint, PDF)
- Google Search, Maps, Gmail,
YouTube, Calendar, Google Talk, Picasa integration
- Voice memo
- Predictive text input
http://igyaan.in/2012/03/21649/upgrade-micromax-a85-android-2-3-4-gingerbread-igyaan-version
2.3 is already available. Is it possible to get this kernel source and build the cm9/ics rom for A85?
hmm... this is a great phone ! great hardware but no SW support
quick question optimus 2X have the same board and gpu so will their rom's work on our phone too ? the only diffrence i see is the camera and couple of kernel related features like tv out and usbotg..
what do u think bro
my father gave me a tablet as a present which only used for less than 1 month. The tablet is stuck of the android logo and i have tried to reboot it using the volume key and the on button but its not working. It was in a box but no manufacturer's name is written on it all that is written is android tablet pc. I cant open my tablet to see all the details about it all i have is a user manual with the following specifications.
Basic function
OS Android 4.0
CPU ARM Cortex-A8 1GHz - 1.5GHz
RAM 512M-1GB(optional)
ROM Nand Falsh 4GB/8GB/16GB(Optional)
LCD 7' 8' 9.7'(OPTION) HP display
Touch panel Capacitive/Resistance Touch Panel(Optional)
2D/3D AMD graphic acceleration, full support
Graphic Open GL ES2.0(AMD Z340)and Open VG1.1(AMD Z160)@27M Tri/sec
WIFI wireless Support 802.11b/g/n standard, highesttransmission get to 300Mbps,support local WAPI wireless protocol standard
3G Built-in 3G Module(option), WCDMA/HSDPA,supoort calling, message, Wifi ad hoc
TF expansion for optional 3G module to realise 3G communication. External MICRO SD(TF)slot.Max. 32GB TF card
USB USB high speed 2.0. Can be connected to the computer to copy files
VPU Maximum support hardware decoding 720P and 1080i, and 480 video encoding
Gravity Built-in 3D gravity sensor to make screen realize360degree rotation
Audio support gravity sense operation game. AC'97 full duplex codec, support AAC/AMR/MP3/WMA/WAV/MIDI and so on
Video WMV/ASF/MP4/3GP/AVI/MKV/VC-1/DIVX/MPEG-2/MPEG-4/H.263/H.264 720P HD 10S0i
Game Support several of entertainment games based on Android platform.
Web Support many-internet applications like web, social,video,chatting and so on.
E-book Assemble e-book tool to read based on android platform
Photo Frame Built-in photo player, and take it as a photo frame or calender
Office Support various of office software based on Abdroid platform, to realize office functions, Such as Word/Excel/PPT/PDF
Flash a custom rom using flashtool supporting ur tab.
Or better search Google if u find info about ur tab go to service center
Sent from moon to earth........
Hey all i have a problem with my tablet, i don't know why my tablet's firmware crashed and cannot boot into recovery or anything . I'm trying many methods but i didn't know what to do more so i just wanna find the model . I bought the tablet from a friend and he didn't gave me the models number ,i just havet these photos :
And i think this is the certifications of the tablet : !OS Android 4.0
CPU ARM Cortex-A8 1GHz - 1.5GHz
RAM 512M-1GB(optional)
ROM Nand Falsh 4GB/8GB/16GB(Optional)
LCD 7' 8' 9.7'(OPTION) HP display
Touch panel Capacitive/Resistance Touch Panel(Optional)
2D/3D AMD graphic acceleration, full support
Graphic Open GL ES2.0(AMD Z340)and Open VG1.1(AMD Z160)@27M Tri/sec
WIFI wireless Support 802.11b/g/n standard, highesttransmission get to 300Mbps,support local WAPI wireless protocol standard
3G Built-in 3G Module(option), WCDMA/HSDPA,supoort calling, message, Wifi ad hoc
TF expansion for optional 3G module to realise 3G communication. External MICRO SD(TF)slot.Max. 32GB TF card
USB USB high speed 2.0. Can be connected to the computer to copy files
VPU Maximum support hardware decoding 720P and 1080i, and 480 video encoding
Gravity Built-in 3D gravity sensor to make screen realize360degree rotation
Audio support gravity sense operation game. AC'97 full duplex codec, support AAC/AMR/MP3/WMA/WAV/MIDI and so on
Video WMV/ASF/MP4/3GP/AVI/MKV/VC-1/DIVX/MPEG-2/MPEG-4/H.263/H.264 720P HD 10S0i
Game Support several of entertainment games based on Android platform.
Web Support many-internet applications like web, social,video,chatting and so on.
E-book Assemble e-book tool to read based on android platform
Photo Frame Built-in photo player, and take it as a photo frame or calender
Office Support various of office software based on Abdroid platform, to realize office functions, Such as Word/Excel/PPT/PDF
The product company is STACH . I try to find the model on their site but nothing. If anybody have any solution or help at least i gonna need it ! ahh btw i use LiveSuite and PhoenixSuite but still nothing . Thanks in advance
try preswsing power button and vol up button for 10-15 secs this will do a hard reset and might work
First of all thanks for reply.
Second already done but the firmware and the recovery are crashed. I got red triangle in recovery... Any other help??
Sent from my ST25i using xda app-developers app
It seems that they are in old fashion, but they are kind of classical. Amlogic MX3 and M8 are very popular model in many TV box,good performance and great vaule earns lots of praise from users. Let's take alook at them. They share the almost same specs:
MX III & M8
CPU Amlogic S802 Quad Core up to 2.0GHz (Cortex-A9)
GPU Octa core ARM Mali-450 GPU up to 600MHz
RAM DDR3 2GB
ROM Onboard eMMC Flash 8GB
Extended Storage Micro SD Card (Maximum support 32GB)
Wifi Connectivity 802.11a/b/g/n;2.4GHz 5GHz
Ethernet 10/100M LAN
bluetooth V4.0
Video Supported " H.264 [email protected] up to [email protected]
H.264 MVC up to [email protected]
MPEG-4 [email protected] up to [email protected] (ISO-14496)
WMV/VC-1 SP/MP/AP up to [email protected]
AVS JiZhun Profile up to [email protected]
MPEG-2 MP/HL up to [email protected] (ISO-13818)
MPEG-1 MP/HL up to [email protected] (ISO-11172)
RealVideo 8/9/10 up to [email protected]
H.265 HEVC up to 720P
WebM up to VGA
Multiple language and multiple format sub-title video support
MJPEG and JPEG unlimited pixel resolution decoding (ISO/IEC-10918)
Supports JPEG thumbnail, scaling, rotation and transition effects"
Audio Supported Support: MP3, AAC, WMA, RM, FLAC, OGG
Picture Supported Mkv,wmv,mpg,mpeg,dat,avi,mov,iso,mp4,rm ,jpg,etc.
Power 5V 2A
Language Multi-language
Miracast/DLNA Support
M8 has a very good performance, unfortunately the firmware is not always stable, and there still quite a few issues that needs to be fix.
PROS
Smooth and fast firmware.
Android 4.4 Kitkat
XBMC 13 pre-installed
Blu-Ray ISO and 4K video playback
1080p user interface
4K video output up to 30 fps supported
Good Ethernet performance (60 Mbps video playback OK)
Good video formats/codecs support
USB webcam works with Skype and Google Hangouts
HDMI CEC support
CONS
Stability problems. Not catastrophic, but the device may still hang a few times. Could it be temperature related?
Bluetooth not working.
Poor Wi-Fi performance.
Can’t install paid apps via Google Play.
Sometimes non-optimal user’s experience:
Need to switch between XBMC and MX Player depending on video files
Multiple input devices required, e.g. if you use an air mouse, you still need to access the IR remote to put the device into Standby.
Bluetooth not available from default settings menu
Only Chinese cities available for weather
H.265 not working smoothly (frames skipped). Probably not fixable (not supported by hardware, and GPGPU not supported by Mali-450)
DTS, Dolby, AC3 not supported by hardware, but software decoded in XBMC (Can’t be fixed, SoC related)
MX III 4 stars. Did not have all apps loaded as i thought. But over-all really superior
PROS
Nice android devicea bit weak on 1080P streaming.
Works great with addition of Rii wifi keyboard and Solo Loader
This is a dream for KODI/XBMC users who have grown tired of using their computer hooked up to their tv for streaming like I was
No complaints here!
Good android tv box
Great but not too polished yet.
CONS
Cheap Network Components Really Hold this Thing Back
my old mk919 (which is obsolete now) delivers more consistent
ditto
coopersimith said:
CONS
Stability problems. Not catastrophic, but the device may still hang a few times. Could it be temperature related?
Bluetooth not working.
Poor Wi-Fi performance.
Can’t install paid apps via Google Play.
Sometimes non-optimal user’s experience:
Need to switch between XBMC and MX Player depending on video files
Multiple input devices required, e.g. if you use an air mouse, you still need to access the IR remote to put the device into Standby.
Bluetooth not available from default settings menu
Only Chinese cities available for weather
H.265 not working smoothly (frames skipped). Probably not fixable (not supported by hardware, and GPGPU not supported by Mali-450)
DTS, Dolby, AC3 not supported by hardware, but software decoded in XBMC (Can’t be fixed, SoC related)
Click to expand...
Click to collapse
Al of these cons you listed for the M8 apply to the MXIII in my experience (I have an MXIII). I have better playback experience using MX Player w/ ARM v7 Neon codecs (HW+ decoding) for 1080p and 10-bit H.264 (yes, I watch anime).
In other words, these boxes seem almost exactly comparable (they may have the exact same hardware).
both of these boxes have since been updated to the Amlogic S812 processor M8S & the MXiii plus
the M8S has also another model now available in the M8S+ with 1 gb lan port and running android 5.1.1.
I have the M8S+ and can say its a great improvement on its predecessor.
worth looking at if your thinking about buying an M8S or MXiii
Anti-
I have à m8s+ box but where do you find the 5.1 firmware ?
Horus73 said:
I have à m8s+ box but where do you find the 5.1 firmware ?
Click to expand...
Click to collapse
Here is the firmware URL chinagadgetsreviews.com/download-android-lollipop-5-1-stock-firmware-for-m8s-tv-box.html
Hey, for me m8s+ is a big now.
Had it a while now and not able to get a status bar or navigation bar to show/work.
I've tried a couple of rom, including the one above and 5.1.1.
Any info or help would be great, is the status bar and navigation bar just not possible here?
Hi ! I have an M8 S802 with a custom rom Dtv 5.0 Android Kitkat 4.4.2 and I have a mistake with an App call Mytf1 it's an App for watch Tv and replay but this App cause problem !!!
This is the only App of with Tv cause problems the another France Tv M6 Play etc.. Work fine...
The problem are when I navigate in the App work fine but when I play a vidéo, the vidéo play in background ? I have a black screen and the vidéo play ? If I click in the black screen I see in the top and bottom the video background the black screen ?
I can't watch video in this App...
You know why ? I can't understand ??? I Install RootCloak but don't work to..
I want to know what is the problem... Thank you...
How to update MXIII to Android 5.1 or Custom ROM
I have Amlogix MXIII 4K TV BOX running Android 4.4.2, it sometimes does not turn on properly and gets stuck at MXBOX logo and keeps loading, I have to take out power and put it back multiple times before it loads to home screen, is there anyway to fix this or update this box to a custom file or android 5.1 for better performance ?
Hello my friends,
I've an mxiii 2g/8g bricked, no hdmi signal, red light only..
I've manage to bring it to this after a half booting by a power line failure, and then only the red light was on...
I was looking to revive it with amlogic usb tool, but only to 2% then give a pll error..even with several img...was not reading from sd card with boot magic...
Any thoughts?
Thanks
Where is the firmware for mx3 5.1 found
Crozz76 said:
Where is the firmware for mx3 5.1 found
Click to expand...
Click to collapse
The Team DevDigitel universal ROM could quite likely work, since it is for any Amlogic S8xx.
Assuming that you have backups etc, you could try the way I successfully upgraded my S812 box.
If you do, make sure you let us know how it went
My Bluetooth earbuds support the modern LC3 Codec (LE Audio). I know Android 12 supports LE Audio. However, LE Audio also requires phone chipset support....E.G. MediaTek MT6891Z handsets support it. Has Google included it in this latest Tensor chipset?
Its nothing to do with "tensor". It has to do with the wifi/bt chip which I think is a BCM4389, which, I believe, is a bluetooth 5.2 chip. 5.2 means LE audio.
Also the google specs say 5.2: https://support.google.com/pixelphone/answer/7158570
So which Pixels support the LC3 codec?
asj0422 said:
So which Pixels support the LC3 codec?
Click to expand...
Click to collapse
That has been answered for you.
No, I don't believe it has...
asj0422 said:
No, I don't believe it has...
Click to expand...
Click to collapse
Then read some more.
asj0422 said:
So which Pixels support the LC3 codec?
Click to expand...
Click to collapse
I came to discover that Android 12 omitted the LE audio function of BT 5.2. Rather LE Audio is only coming with upcoming Android 13. I hope it will finally get enabled on Pixel 6 handsets come Android 13.
This is such a confusing spec. This (https://support.google.com/pixelphone/answer/9393002?hl=en) doesn't help at all, since it seems like all these pixels support it already. Yet they don't...
using the codec info app from fdroid. "LC3" is not listed in the audio section or any other for my pixel 6.
just another thing google skimped out on with this "flagship"
Android 12 Compatibility Definition | Android Open Source Project
source.android.com
this page what MUST be included in the hardware for android 12
( i think that is how it reads)
section 222
Handheld device implementations MUST support the following audio encoding and decoding formats and make them available to third-party applications:
[5.1/H-0-1] AMR-NB
[5.1/H-0-2] AMR-WB
[5.1/H-0-3] MPEG-4 AAC Profile (AAC LC)
[5.1/H-0-4] MPEG-4 HE AAC Profile (AAC+)
[5.1/H-0-5] AAC ELD (enhanced low delay AAC)
so lc3 is not required at minimum.( not that the minimum is what should be followed IMHO)
rumors say that lc3 will be in android 13 but it might also be in android 12 custom roms depending on the developer.
so you could try android 13 beta
Interesting. I'm on the beta, but I don't have any bt devices to test it out with unfortunately. (I have bt devices, but none that use the lc3 codec, to my knowledge.)