Related
Hello please help i have a big problem on my NEO N003 1/4g T13
I have flashed to newest Stock room from the website neo then i try magerto room he was fine as the beginning then after 2 days he start freezing and sometimes working then the camera is no longer working i tell my self its just poor room
i decide to use the stock room but after i flashed work normal for 10 minute then freeze the screen turn black utile you remove the battery and put back in 2 minutes
after many times trying to flash it by sp flash tool i hit format ...my imei is gone and no signal on the sim card ( thats not a big problem)
but the phone still freezing and restarting ...black screen ......
after that the phone not able to turn on even the logo just black you can see he is trying turn on but no logo no nothing
in the device manager detect MediaTek Usb port before was detect preloader MediaTek somthing ......
look at the picture and the sp tool not working MediaTek Usb port and i got this error (look at the picture)
please help me i use the phone only 1 month please help me
this Morning accidentally i put the phone into Preloader Mode and make normal flash and my phone is a live a was very Happy i went to write the imei must root the phone...i have install root programe name is geno (he is work fine on lenovo P780) but in neo N003 he just freeze and tun off and no longer can trun it on again just black screen.
Now when i plug the phone via usb port windows detect it MediaTek USB Port how i can put it again in Mediatek Preloader VCOM ???
Always get error 4032 on sp flash tool (format , upgrade, download) all he same error
Guys please Help me .
Please Help Help !!!!!
Help me For God Sake I am going Crazy !!!!!
benladen said:
Hello please help i have a big problem on my NEO N003 1/4g T13
I have flashed to newest Stock room from the website neo then i try magerto room he was fine as the beginning then after 2 days he start freezing and sometimes working then the camera is no longer working i tell my self its just poor room
i decide to use the stock room but after i flashed work normal for 10 minute then freeze the screen turn black utile you remove the battery and put back in 2 minutes
after many times trying to flash it by sp flash tool i hit format ...my imei is gone and no signal on the sim card ( thats not a big problem)
but the phone still freezing and restarting ...black screen ......
after that the phone not able to turn on even the logo just black you can see he is trying turn on but no logo no nothing
in the device manager detect MediaTek Usb port before was detect preloader MediaTek somthing ......
look at the picture and the sp tool not working MediaTek Usb port and i got this error (look at the picture)
please help me i use the phone only 1 month please help me
this Morning accidentally i put the phone into Preloader Mode and make normal flash and my phone is a live a was very Happy i went to write the imei must root the phone...i have install root programe name is geno (he is work fine on lenovo P780) but in neo N003 he just freeze and tun off and no longer can trun it on again just black screen.
Now when i plug the phone via usb port windows detect it MediaTek USB Port how i can put it again in Mediatek Preloader VCOM ???
Always get error 4032 on sp flash tool (format , upgrade, download) all he same error
Guys please Help me .
Click to expand...
Click to collapse
benladen said:
Help me For God Sake I am going Crazy !!!!!
Click to expand...
Click to collapse
Why no one try to Help me please
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Up up up
help !!!!
benladen said:
Up up up
help !!!!
Click to expand...
Click to collapse
help
benladen said:
Now when i plug the phone via usb port windows detect it MediaTek USB Port how i can put it again in Mediatek Preloader VCOM ???
Always get error 4032 on sp flash tool (format , upgrade, download) all he same error
Guys please Help me .
Click to expand...
Click to collapse
On my phone, mine has the same chip as yours, to flash in preloader mode, I do it in this order,
1 connect phone to pc via usb with battery removed,
2 load flashtool with scatterfile and rom to flash,
3 click on download in flashtool,
4 put battery into phone
SPflashtool then searches for the preloader driver, loads it briefly and then loads the DA Usb Vcom port driver and then proceeds with flashing
This will only work if you have the usb vcom preloader drivers installed on your pc
To check if you have preloader driver installed, open device manager on your pc, connect your phone with usb cable and battery removed, put in battery while watching device manager, if driver is installed you should see 'Preloader Usb Vcom port' appear in the ports section,
but it will only be there for a few seconds, and will dissappear again. If you do not see this you need to install the Vcom driver.
Hope this helps
you help me a lot man !!!!!
oscarblue48 said:
On my phone, mine has the same chip as yours, to flash in preloader mode, I do it in this order,
1 connect phone to pc via usb with battery removed,
2 load flashtool with scatterfile and rom to flash,
3 click on download in flashtool,
4 put battery into phone
SPflashtool then searches for the preloader driver, loads it briefly and then loads the DA Usb Vcom port driver and then proceeds with flashing
This will only work if you have the usb vcom preloader drivers installed on your pc
To check if you have preloader driver installed, open device manager on your pc, connect your phone with usb cable and battery removed, put in battery while watching device manager, if driver is installed you should see 'Preloader Usb Vcom port' appear in the ports section,
but it will only be there for a few seconds, and will dissappear again. If you do not see this you need to install the Vcom driver.
Hope this helps
Click to expand...
Click to collapse
Thank you so much man you help me a lot !!!
This how i get preloader
1-remove the battery
2-connect the phone to usb but before windows detect the device put the battery back
windows will detect preloder driver !!that's great
Now must go to my office i have windows 7 there to flash the phone with stock room and i will put the result later here
because i have win8.1 at home i get a lot of problem flashing this phone on it .
thank's again Peace.
oscarblue48 said:
On my phone, mine has the same chip as yours, to flash in preloader mode, I do it in this order,
1 connect phone to pc via usb with battery removed,
2 load flashtool with scatterfile and rom to flash,
3 click on download in flashtool,
4 put battery into phone
SPflashtool then searches for the preloader driver, loads it briefly and then loads the DA Usb Vcom port driver and then proceeds with flashing
This will only work if you have the usb vcom preloader drivers installed on your pc
To check if you have preloader driver installed, open device manager on your pc, connect your phone with usb cable and battery removed, put in battery while watching device manager, if driver is installed you should see 'Preloader Usb Vcom port' appear in the ports section,
but it will only be there for a few seconds, and will dissappear again. If you do not see this you need to install the Vcom driver.
Hope this helps
Click to expand...
Click to collapse
Hello, I can't Flash the phone over the preloder i have try 2 pcs and 2 diffrent drivers no luck the sp tool give me errors 4010... 2020
after trying many times i got flashed over the mediatek usb port ....
then the usb disconnect and the MediaTek DA USB VCOM connect and the flash begin utill 100%
but the phone not starting just black screen
try to format , upgrade , download nothing try 23 stock roms the old and the new nothing
please help help !!!
Do you see the preloader driver in device manager when you connect your phone as I described above?
Which build of SPflashtool are you using? the tool is quite buggy and sometimes helps to try another version
oscarblue48 said:
Do you see the preloader driver in device manager when you connect your phone as I described above?
Which build of SPflashtool are you using? the tool is quite buggy and sometimes helps to try another version
Click to expand...
Click to collapse
I don't see preloader driver i see just mediatek usb port
I am using SP Flash Tool v3.1328.0.183 and other versions
Now the flash not working again stop at the red bar 100% and give error 4032
i am sick with that error
i read some people get they phones alive with an loading an other preloader and the flash get throw !!!
look at this
thank you for responding man.
any One what i can do now ??!!!
Help for god sake !!
Ok, i think the only way your going to unbrick your phone is to flash the exact correct rom for it, Do you have a copy of the stock rom for your phone suitable for SPflashtool?
The link that you show is for a Feiteng H9500, that is very unlikely that it will work on your phone, the reason your phone is bricked is because you have probably flashed the wrong preloader block, and that is whats causing the trouble, you need to make sure you have the correct rom for your device before you start.
I think the only time you had a little success is when you accidentally entered preloader mode and if it were my phone I would concentrate on getting the preloader driver installed. There are some tutorials on here to install the drivers, it can be a bit tricky, and not all mediatek devices are the same, so a bit of trial and error may be needed
Once you have the Preloader usb vcom drivers installed I would then attempt to flash just the preloader and dsp_bl blocks initially from the correct rom for your phone, and then if successful flash the remainder of the rom, without preloader and dsp_bl
If you flash the wrong preloader/dsp_bl you will almost certainly brick your phone, so it must be either from a backup you have made of your original rom or from the exact stock rom for your phone.
oscarblue48 said:
Ok, i think the only way your going to unbrick your phone is to flash the exact correct rom for it, Do you have a copy of the stock rom for your phone suitable for SPflashtool?
The link that you show is for a Feiteng H9500, that is very unlikely that it will work on your phone, the reason your phone is bricked is because you have probably flashed the wrong preloader block, and that is whats causing the trouble, you need to make sure you have the correct rom for your device before you start.
I think the only time you had a little success is when you accidentally entered preloader mode and if it were my phone I would concentrate on getting the preloader driver installed. There are some tutorials on here to install the drivers, it can be a bit tricky, and not all mediatek devices are the same, so a bit of trial and error may be needed
Once you have the Preloader usb vcom drivers installed I would then attempt to flash just the preloader and dsp_bl blocks initially from the correct rom for your phone, and then if successful flash the remainder of the rom, without preloader and dsp_bl
If you flash the wrong preloader/dsp_bl you will almost certainly brick your phone, so it must be either from a backup you have made of your original rom or from the exact stock rom for your phone.
Click to expand...
Click to collapse
Thank you for you respond ,
i have Preloader usb vcom inslalled on my PC i have 3x stock roms from the NEO website all does not working always red bar 100% and get error 4032 on SP flash tool
Do you want to say that i will contact someone have the same model of my phone and tell him to make backup to his phone and upload it for me ? is it right ?
i have lenovo P780 when i turn it off and plug it to usb he detect it preloader mediatek then Disappears , thats what the NEO N003 must be :crying:
any way if some one have a rom work with my phone plz upload it for me
thank you again peace.
benladen said:
Thank you for you respond ,
i have Preloader usb vcom inslalled on my PC i have 3x stock roms from the NEO website all does not working always red bar 100% and get error 4032 on SP flash tool
Do you want to say that i will contact someone have the same model of my phone and tell him to make backup to his phone and upload it for me ? is it right ?
i have lenovo P780 when i turn it off and plug it to usb he detect it preloader mediatek then Disappears , thats what the NEO N003 must be :crying:
any way if some one have a rom work with my phone plz upload it for me
thank you again peace.
Click to expand...
Click to collapse
So the preloader vcom driver is installed ok on your pc, but you do not see it when you connect your phone, maybe you need to connect in a different way, on my phone I have to connect switched off phone with the battery removed, and when the battery is put in, then you see preloader driver pop up in device manager, there are many different MTK phones and different ways to connect.
The stock rom you have should be fine as long as it is the correct one for your device.
oscarblue48 said:
So the preloader vcom driver is installed ok on your pc, but you do not see it when you connect your phone, maybe you need to connect in a different way, on my phone I have to connect switched off phone with the battery removed, and when the battery is put in, then you see preloader driver pop up in device manager, there are many different MTK phones and different ways to connect.
The stock ROM you have should be fine as long as it is the correct one for your device.
Click to expand...
Click to collapse
the phone does not start at all not logo no no nothing is just black screen i have try this before connect the device then put the battery on it when it connect it's work first time the preloader device show , but i can not flash the ROM with it the sp flash tool give me error
i was able the flash it with mediatek usb port but the phone does not start black screen
, now i can't enter to the preloader device or even flash it with mediatek usb port !!!!!
yes its correct ROM i flash the phone with it before ...i brick the phone by root it by software name GENO the phone just stop working
i have use all the combination button but not luck i am stuck at mediatek usb port and sp tool give me error 4032....
:crying::crying::crying:
benladen said:
the phone does not start at all not logo no no nothing is just black screen i have try this before connect the device then put the battery on it when it connect it's work first time the preloader device show , but i can not flash the ROM with it the sp flash tool give me error
i was able the flash it with mediatek usb port but the phone does not start black screen
, now i can't enter to the preloader device or even flash it with mediatek usb port !!!!!
yes its correct ROM i flash the phone with it before ...i brick the phone by root it by software name GENO the phone just stop working
i have use all the combination button but not luck i am stuck at mediatek usb port and sp tool give me error 4032....
:crying::crying::crying:
Click to expand...
Click to collapse
If your phone now is completely dead, probably your only hope of reviving it is by using the test point, see 'Modes of the virtual COM ports', here.....
http://forum.xda-developers.com/showpost.php?p=38369102&postcount=11
Ive never done this procedure, so cant help much with it, but if you search these threads for mediatek test point or similar, you might find some info on it
oscarblue48 said:
If your phone now is completely dead, probably your only hope of reviving it is by using the test point, see 'Modes of the virtual COM ports', here.....
http://forum.xda-developers.com/showpost.php?p=38369102&postcount=11
Ive never done this procedure, so cant help much with it, but if you search these threads for mediatek test point or similar, you might find some info on it
Click to expand...
Click to collapse
ok thank you i will see what i can do !!
oscarblue48 said:
If your phone now is completely dead, probably your only hope of reviving it is by using the test point, see 'Modes of the virtual COM ports', here.....
http://forum.xda-developers.com/showpost.php?p=38369102&postcount=11
Ive never done this procedure, so cant help much with it, but if you search these threads for mediatek test point or similar, you might find some info on it
Click to expand...
Click to collapse
Hello, man can you Help me to find Test point
look at the picture down here
thank you.
benladen said:
Hello, man can you Help me to find Test point
Click to expand...
Click to collapse
As I said, Ive never done this myself, only read about it and have no idea where the test point is on your phone, they all appear to be in different places, on an mt6577 I had previously it was easy to find, just by the sim slot, there was no need to even strip the phone down, but on most other models they all seem to be less accessible. It will be somewhere on the main board I would imagine, usually, but not always, a small round brass dot about 2mm accross, and I noticed while searching that some are marked 'KCOLO' or similar. I believe also from what I've read that the manufacturers use this method to input the factory rom, so it must be there somewhere, its just a question of locating it. The best method to find it apparently is by testing different points with a multimeter to find one that corresponds with your battery output.
some more info here... http://forum.xda-developers.com/showpost.php?p=32424838&postcount=616
and a link to rua1's russian thread on the subject, translation with google chrome is not very good but there are some pics throughout the thread that might be helpful.... http://forum.china-iphone.ru/test-pointi-dlya-proshivki-preloader-na-mt6573-75-77-t22559.html
uh, well.. i just hard-bricked my tablet while trying to flash the stock rom, if i long press the power button nothing happens, for example. i dont know what to do... before this i did a full backup through twrp, can that save me or is this dead forever? the software i used was SP Flast Tool and all the drivers needed.
DarkAlpha.Sete said:
uh, well.. i just hard-bricked my tablet while trying to flash the stock rom, if i long press the power button nothing happens, for example. i dont know what to do... before this i did a full backup through twrp, can that save me or is this dead forever? the software i used was SP Flast Tool and all the drivers needed.
Click to expand...
Click to collapse
Try to boot your Android in recovery mode. You can recover it from backup in recovery mode. If your Android not starting anyways then may be you corrupted your Android bootloader.
Ashwinrg said:
Try to boot your Android in recovery mode. You can recover it from backup in recovery mode. If your Android not starting anyways then may be you corrupted your Android bootloader.
Click to expand...
Click to collapse
the problem is: I can't do anything... it doesn't even turn on the light when its charging... I can't even make the logo appear
Then how do I fix the corrupted boot loader?
DarkAlpha.Sete said:
the problem is: I can't do anything... it doesn't even turn on the light when its charging... I can't even make the logo appear
Then how do I fix the corrupted boot loader?
Click to expand...
Click to collapse
Install mediatek vcom USB drivers to your computer. Press power button and either volume up and down button. See if your tablet detects in meta mode(preloader USB vcom port) on your computer device manager. If it detects in meta mode then flash your tablet stock ROM using SP flash tool.
Ashwinrg said:
Install mediatek vcom USB drivers to your computer. Press power button and either volume up and down button. See if your tablet detects in meta mode(preloader USB vcom port) on your computer device manager. If it detects in meta mode then flash your tablet stock ROM using SP flash tool.
Click to expand...
Click to collapse
That worked... Its working(again) Sorry but this time I can't give you a thanks, I figured how to solve this alone, before you posted that
Lenovo Yoga 8 B600-f stuck in downloading using spflash tool
i tried different ways to fix this error but nothing can do with this
---------- Post added at 01:58 PM ---------- Previous post was at 01:51 PM ----------
how can i fix this
Help me guys.. My RN4 mtk 3/64 MIUI Global 8.0.3.0 unlockbootloader suddently dead.. No led, no vibrate. My pc detect as mtk usb port..but connection not stable
.. Connect-disconnect repeatly. And SPFT can't work.. Can't format, can't readback, can't flash.. Always stuck at 100% red bar and ERROR : STATUS_DA_HASH_MISMATCH for rom miui 8 china or global stable.. And ERROR : STATUS_EXCEED_NUM_MAX for rom global dev and china dev..please give me solution :crying::crying:
Thanks..
Can you get into the bootloader to use fastboot? Does that much work? If not, you may be in trouble
Also, are you positive you have the MTK driver installed correctly? I remember there being driver verification issues with Win10.
smokinjoe2122 said:
Can you get into the bootloader to use fastboot? Does that much work? If not, you may be in trouble
Also, are you positive you have the MTK driver installed correctly? I remember there being driver verification issues with Win10.
Click to expand...
Click to collapse
Can not enter fastboot or recovery mode .. I am using win 7 64bit .. And for the mtk driver I've tried to install repeatedly from various sources and in various ways but the result is the same.
arilevint said:
Help me guys.. My RN4 mtk 3/64 MIUI Global 8.0.3.0 unlockbootloader suddently dead.. No led, no vibrate. My pc detect as mtk usb port..but connection not stable
.. Connect-disconnect repeatly. And SPFT can't work.. Can't format, can't readback, can't flash.. Always stuck at 100% red bar and ERROR : STATUS_DA_HASH_MISMATCH for rom miui 8 china or global stable.. And ERROR : STATUS_EXCEED_NUM_MAX for rom global dev and china dev..please give me solution :crying::crying:
Thanks..
Click to expand...
Click to collapse
If your repeatedly getting disconnect/reconnect I would suggest you use another USB cable or USB port because that's not normal.
If not then it may be a driver/PC issue.
Sent from my Redmi Note 4 using Tapatalk
Wilderone said:
If your repeatedly getting disconnect/reconnect I would suggest you use another USB cable or USB port because that's not normal.
If not then it may be a driver issue.
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
Ok..I'm going to buy a new cable.
Still unresolved. I try memory test SPFT can run normally. Device manager detects as MediaTek DA vcom usb .. But if I format or flashing error message appears again .. STATUS_DA_HASH_MISMATCH.
Perhaps try downloading different firmware if you're getting a hash error?
I still think getting into fastboot is important...Since Official MIUI doesn't have a real recovery, you're better off installing TWRP and seeing if you can do something from within recovery.
arilevint said:
Still unresolved. I try memory test SPFT can run normally. Device manager detects as MediaTek DA vcom usb .. But if I format or flashing error message appears again .. STATUS_DA_HASH_MISMATCH.
Click to expand...
Click to collapse
Is your Rn4 a mtk device or snapdragon device???? Please check.
If it is mtk then u would require scatter file along with correct firmware.
And if it is a snapdragon device, u can flash most of the things through bootloader mode.
Hope it helps.
subodhverma21 said:
Is your Rn4 a mtk device or snapdragon device???? Please check.
If it is mtk then u would require scatter file along with correct firmware.
And if it is a snapdragon device, u can flash most of the things through bootloader mode.
Hope it helps.
Click to expand...
Click to collapse
Im sure my device xiaomi redmi note 4 mediatek 3/64gb with logo china mobile in back casing.
arilevint said:
Im sure my device xiaomi redmi note 4 mediatek 3/64gb with logo china mobile in back casing.
Click to expand...
Click to collapse
Working with MTK devices is bit tricky.
though you will get success, i Hope
If you are sure that your device is MTK, then ofcourse your bootloader mode will not work. So try to adopt this solution:
1. Get SPFlash Tool, the latest one. http://spflashtool.com/
2. Get MediaTek USB VCOM drivers. http://spflashtool.com/
3. Now most important Get your Original Firmware along with the Scatter file. The SPflashtool only recognizes the scatter file. So you need ROM along with scatter file.
check this link and follow the instructions http://en.miui.com/thread-370620-1-1.html
check your ROM if it is here. Only Use the correct firmware for your devices otherwise you may do a permanent damage to your device. http://en.miui.com/download-309.html#454
Hope it helps.
Hi i have the same problem, spft always give me an error, i cannot enter in fastboot or recovery, did you solve the problem?
have you flashed preloader or had you selected "Format all and Download"? If not, or maybe yes,, try to flash custom cust.img and just plug in your phone without holding vol-down button. Also make sure that you disable driver signature enforcement. Anyway it sounds scary as I reflash my fastboot firmware on SP Flash Tool ocasionally after using twrp.
---------- Post added at 06:14 PM ---------- Previous post was at 06:12 PM ----------
If it doesn't work,, have a motherboard replacement
hello i managed to flash with sp flash tool but after flashing it is not charging and couldnt be powered on. i have held the power button for more than 20 secs
jr1945 said:
hello i managed to flash with sp flash tool but after flashing it is not charging and couldnt be powered on. i have held the power button for more than 20 secs
Click to expand...
Click to collapse
go to help at care centre buddy it look like a serious problem
subodhverma21 said:
Working with MTK devices is bit tricky.
though you will get success, i Hope
If you are sure that your device is MTK, then ofcourse your bootloader mode will not work. So try to adopt this solution:
1. Get SPFlash Tool, the latest one.
2. Get MediaTek USB VCOM drivers.
3. Now most important Get your Original Firmware along with the Scatter file. The SPflashtool only recognizes the scatter file. So you need ROM along with scatter file.
check this link and follow the instructions
check your ROM if it is here. Only Use the correct firmware for your devices otherwise you may do a permanent damage to your device.
Hope it helps.
Click to expand...
Click to collapse
i stuck in (Vol -) ,( Vol - and power button )and plug in USB. red bar not appear in SP tool, why it happen? please help
chimouw said:
i stuck in (Vol -) ,( Vol - and power button )and plug in USB. red bar not appear in SP tool, why it happen? please help
Click to expand...
Click to collapse
are you able to go to VCOM mode?
you have to go to VCOM mode in the MTK device to use the SP Flash Tool.
1. Install Vcom drivers from internet.
2. Phone will get detected. Then the SP Flash Tool will Run
Hope it helps.
subodhverma21 said:
are you able to go to VCOM mode?
you have to go to VCOM mode in the MTK device to use the SP Flash Tool.
1. Install Vcom drivers from internet.
2. Phone will get detected. Then the SP Flash Tool will Run
Hope it helps.
Click to expand...
Click to collapse
I finally installed mediatek driver but it didn't give any progress, btw test point can work??
chimouw said:
I finally installed mediatek driver but it didn't give any progress, btw test point can work??
Click to expand...
Click to collapse
Do you have the scatter file?
where did you get the scatter file?
Which SPF tool are you working with?
Download the latest SPFT and then try.
hope it helps.
subodhverma21 said:
Do you have the scatter file?
where did you get the scatter file?
Which SPF tool are you working with?
Download the latest SPFT and then try.
hope it helps.
Click to expand...
Click to collapse
I has scatter file from en. Miui /a-234 with codename nikel, I used spf tool the latest version.
Otherwise, my phone can not detected in my pc, neither unknown device or Vcom statuse. How should I do again? With test point or DFC can work??
Really my phone is Deep Death, before DD I flashed with snap dragon rom, result is DD
chimouw said:
I has scatter file from en. Miui /a-234 with codename nikel, I used spf tool the latest version.
Otherwise, my phone can not detected in my pc, neither unknown device or Vcom statuse. How should I do again? With test point or DFC can work??
Really my phone is Deep Death, before DD I flashed with snap dragon rom, result is DD
Click to expand...
Click to collapse
Have patience, it should not be problem.
Is your battery removable?
If yes, take it out. Unplug usb.
Plug usb again with battery out. Press -vol to detect vcom driver.
Most important , adb driver or usb debugging mode should not be enabled. Otheewise the vcom drivers will not install.
Once vcom mode works. SPFT will work on its own.
Hope it helps.
Does somebody have any information or encounter about this? The device is a Blu Energy X Plus 2, a back up phone I wanted to experiment with.
-After unlocking bootloader using ADB, phone got stuck at boot logo.
-I forgot to wipe.
-Device is not yet rooted
-After waiting for minutes I have forced the phone to shut down.
-Volume+Power combo, battery is non removable
-Now it wont turn on and respond to any button.
-It charges, as proven by the red light.
-It is somehow detected by the PC using the VCOM drivers. PC makes a sound and MT65xx PreLoader VCOM appears in the Device Manager.
-SP Flash Tool will not start download. Even tried download before plugging in usb, nothing happens.
-Tried many different flash tools versions. 1628, v5, v3, Nothing works. No error message but an error appears when I plug out the USB cord
-BROM Error: S_BROM_CMD_STARTCMD_FAIL(0x7D5)
Cannot pass bootroom start command! Possibly target power up too early.
Hi , maybe your SP Flash tool is not compatible for your chip , so try this one :
https://spflashtool.com/download/SP_Flash_Tool_v5.1628_Win.zip
Search firmware exactly for your device model .
You can use IDM -Internet Dowwnload Manager for fast downloading...
Teddy Lo said:
Hi , maybe your SP Flash tool is not compatible for your chip , so try this one :
https://spflashtool.com/download/SP_Flash_Tool_v5.1628_Win.zip
Search firmware exactly for your device model .
You can use IDM -Internet Dowwnload Manager for fast downloading...
Click to expand...
Click to collapse
I have already tried the 5.1628 version, it is also not working.
The latest version has a bug I think which causes it to have a RUntime error when picking a scatter file.
The old v3 will not accept any scatter file anymore.
Also I have downloaded two versions of stock rom already. First one is 800 mb and the second one is 2GB. Both do not work, but I suspect the first one to completely fail since it had an unmatching scatter file within.
Try this.Hold power button for 2 min if your phone boots up Good News It's usable.If not then It's only crap now.Mediatek devices are not supposed to be rooted and if somehow you managed to do that they will make sure you pay for it.
Sent from my Pixel 3 XL using Tapatalk
Atifbaig786 said:
Try this.Hold power button for 2 min if your phone boots up Good News It's usable.If not then It's only crap now.Mediatek devices are not supposed to be rooted and if somehow you managed to do that they will make sure you pay for it.
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
I tried it but the device doesnt seem to respond to any button whatsoever. The device is not rooted though, I wanted to flash magisk but it all happened after unlocking the bootloader. But I have hope since the preloader is indeed detected in the PC.
Try to relock bootloader with adb if your device is recognised by ADB ...
Teddy Lo said:
Try to relock bootloader with adb if your device is recognised by ADB ...
Click to expand...
Click to collapse
device is no longer recognized by adb, it wont turn on anymore. Only as MT65xx preloader as it shows in the device manager
helpplease123 said:
device is no longer recognized by adb, it wont turn on anymore. Only as MT65xx preloader as it shows in the device manager
Click to expand...
Click to collapse
Follow this thread maybe is driver issue so read carefully ...
https://forum.xda-developers.com/showthread.php?t=2180436
Good luck
What's up with VCOM?
Well I don't think your PC would be able to detect your device because you haven't got the VCOM drivers yet. Get any VCOM driver for Mediatek, and then disable driver signature enforcing on Windows. Now fire up SPFT and select the scatter use v5.1628 as the newer ones seem to be unstable (also verified by OP). Now choose the Preloader for your device and then enter download mode. Turn off the phone (if you can't, just let it die until the battery is over). And then connect it using an USB cable, while SPFT is in download mode. You should be able to unbrick your device.
And as you said S_BROM_CMD_STARTCMD_FAIL(0x7D5), that is when the device powers up too early before the flash could begin. The 8 byte token is not received by the preloader and hence it ain't working. This is why you have to switch your phone off completely, and also try using a different USB cable
Note:
The preloader parition has an emergency download mode which is used to enable the download to take place. Now, if you flash the wrong preloader, then your device won't even be detected in SPFT or anywhere else. So yeah, in MTK preloader is the life of your phone. Please verify that you are flashing the correct preloader
BusinessKid said:
Well I don't think your PC would be able to detect your device because you haven't got the VCOM drivers yet. Get any VCOM driver for Mediatek, and then disable driver signature enforcing on Windows. Now fire up SPFT and select the scatter use v5.1628 as the newer ones seem to be unstable (also verified by OP). Now choose the Preloader for your device and then enter download mode. Turn off the phone (if you can't, just let it die until the battery is over). And then connect it using an USB cable, while SPFT is in download mode. You should be able to unbrick your device.
And as you said S_BROM_CMD_STARTCMD_FAIL(0x7D5), that is when the device powers up too early before the flash could begin. The 8 byte token is not received by the preloader and hence it ain't working. This is why you have to switch your phone off completely, and also try using a different USB cable
Note:
The preloader parition has an emergency download mode which is used to enable the download to take place. Now, if you flash the wrong preloader, then your device won't even be detected in SPFT or anywhere else. So yeah, in MTK preloader is the life of your phone. Please verify that you are flashing the correct preloader
Click to expand...
Click to collapse
Tried everything here, and I even used a windows 7 pc but it is still not working. The VCOM was already installed, in fact when I plug in the phone windows automatically detects it as the MTK Preloader VCOM USB port(COM13) in the device manager. The VCOM driver that is supposed to be installed leaves an error in the device manager (COM12). SP Flash tool still will not start flashing. No error messages, until I plug out the usb cord.
helpplease123 said:
Tried everything here, and I even used a windows 7 pc but it is still not working. The VCOM was already installed, in fact when I plug in the phone windows automatically detects it as the MTK Preloader VCOM USB port(COM13) in the device manager. The VCOM driver that is supposed to be installed leaves an error in the device manager (COM12). SP Flash tool still will not start flashing. No error messages, until I plug out the usb cord.
Click to expand...
Click to collapse
You do see that exclamation right - this means it isn't properly configured
---------- Post added at 01:37 PM ---------- Previous post was at 01:35 PM ----------
helpplease123 said:
Tried everything here, and I even used a windows 7 pc but it is still not working. The VCOM was already installed, in fact when I plug in the phone windows automatically detects it as the MTK Preloader VCOM USB port(COM13) in the device manager. The VCOM driver that is supposed to be installed leaves an error in the device manager (COM12). SP Flash tool still will not start flashing. No error messages, until I plug out the usb cord.
Click to expand...
Click to collapse
Looks like it's more of a Windows issue than your phone. If your preloader's good - you're safe. I think it's a COM bridge issue. Just stay on the wait and I'll get back to you in a minute or two
---------- Post added at 01:40 PM ---------- Previous post was at 01:37 PM ----------
I'm working on a batch script for you to fix the COM issue. Would you mind sharing your Windows Version and Architecture?
I'm building it for Windows 7 x64 - if that's your PC?
BusinessKid said:
You do see that exclamation right - this means it isn't properly configured
Click to expand...
Click to collapse
---------- Post added at 01:37 PM ---------- Previous post was at 01:35 PM ----------
I mean the COM13 is fairly OK for the part, its the VCOM that comes from installing the phone. However the COM12 that came from the manual installer had the exclamation point.
Looks like it's more of a Windows issue than your phone. If your preloader's good - you're safe. I think it's a COM bridge issue. Just stay on the wait and I'll get back to you in a minute or two
---------- Post added at 01:40 PM ---------- Previous post was at 01:37 PM ----------
Click to expand...
Click to collapse
Its already a great thanks from me for you to even post more than once. thank you so much!
[/COLOR]I'm working on a batch script for you to fix the COM issue. Would you mind sharing your Windows Version and Architecture?
I'm building it for Windows 7 x64 - if that's your PC?
Click to expand...
Click to collapse
Yes, in fact I have first tried it in Windows 10 x64 before switching back to this W7 x64 laptop. Same problem same outcome though
So let us go 101
Okay - the first thing that we'd do now is blow off those crappy drivers - uninstall them! Now get on your Windows 10 x64 PC. Install the VCOM drivers from this XDA thread. It's for elephone, however I've used it myself and it works really well on almost any device. Now power off your phone completely (no bootlooop, completely dark screen). Launch SPFT, select scatter, select the correct preloader and then hit on download. Do not connect your phone now! Now wait for 10 seconds. Now connect your phone. And let the download begin. If it works - fantastic, if it doesn't ping me back and I'll be waiting for replying to you. The batch script is almost done (I was doing some kernel work), I'll upload it once I'll be back home (on the way back now).
Fingers crossed :fingers-crossed:
BusinessKid said:
Okay - the first thing that we'd do now is blow off those crappy drivers - uninstall them! Now get on your Windows 10 x64 PC. Install the VCOM drivers from this XDA thread. It's for elephone, however I've used it myself and it works really well on almost any device. Now power off your phone completely (no bootlooop, completely dark screen). Launch SPFT, select scatter, select the correct preloader and then hit on download. Do not connect your phone now! Now wait for 10 seconds. Now connect your phone. And let the download begin. If it works - fantastic, if it doesn't ping me back and I'll be waiting for replying to you. The batch script is almost done (I was doing some kernel work), I'll upload it once I'll be back home (on the way back now).
Fingers crossed :fingers-crossed:
Click to expand...
Click to collapse
Dude holy ****, I cannot believe that it worked! I swear I was very confident that the problem was not in the drivers, but out of luck I started to follow that guide again from start to finish and selected the "MTK USB Port" in the device manager section. Then I plugged in and SP flash tool finally started! You rock!
Your welcome! I'm glad that worked!
Hello I have a chinese Huawei TAG-TL00 phone which I bricked by flashing wrong ROM. Now I have the correct flash file but my phone keeps disconnecting and reconnecting when connect it via USB. In SP flash tool after I click download and connect my phone after 4 seconds the phone disconnects automatically. I have tried numerous MTK drivers and also change USB cable, port and PC too. Nothing has worked. Please help me!!!
ashrafuzzaman16 said:
Hello I have a chinese Huawei TAG-TL00 phone which I bricked by flashing wrong ROM. Now I have the correct flash file but my phone keeps disconnecting and reconnecting when connect it via USB. In SP flash tool after I click download and connect my phone after 4 seconds the phone disconnects automatically. I have tried numerous MTK drivers and also change USB cable, port and PC too. Nothing has worked. Please help me!!!
Click to expand...
Click to collapse
Is the phone in bootloader mode? Make sure it is because it might be just in a bootloop.
nkomarn said:
Is the phone in bootloader mode? Make sure it is because it might be just in a bootloop.
Click to expand...
Click to collapse
No, I did not know before but the bootloader is locked and the phone is not booting at all.
ashrafuzzaman16 said:
Hello I have a chinese Huawei TAG-TL00 phone which I bricked by flashing wrong ROM. Now I have the correct flash file but my phone keeps disconnecting and reconnecting when connect it via USB. In SP flash tool after I click download and connect my phone after 4 seconds the phone disconnects automatically. I have tried numerous MTK drivers and also change USB cable, port and PC too. Nothing has worked. Please help me!!!
Click to expand...
Click to collapse
Spoiler: What I'm going to say won't help you!
I've had that myself! The micro-USB slot on your phone is possibly damaged. For getting that fixed, you'll either have to quickly push in the USB cable and hold it there for a while until it is detected. The sad thing is, if pushing in the USB cable in any way doesn't help then the way to go is some service.
If you're lucky enough, then it may indeed be a driver issue. Please share your OS version and your architecture so that I could be of some more help - other than scaring you!
---------- Post added at 02:00 PM ---------- Previous post was at 01:56 PM ----------
ashrafuzzaman16 said:
Hello I have a chinese Huawei TAG-TL00 phone which I bricked by flashing wrong ROM. Now I have the correct flash file but my phone keeps disconnecting and reconnecting when connect it via USB. In SP flash tool after I click download and connect my phone after 4 seconds the phone disconnects automatically. I have tried numerous MTK drivers and also change USB cable, port and PC too. Nothing has worked. Please help me!!!
Click to expand...
Click to collapse
Wait wait wait - have you installed the VCOM drivers?
BusinessKid said:
Spoiler: What I'm going to say won't help you!
I've had that myself! The micro-USB slot on your phone is possibly damaged. For getting that fixed, you'll either have to quickly push in the USB cable and hold it there for a while until it is detected. The sad thing is, if pushing in the USB cable in any way doesn't help then the way to go is some service.
If you're lucky enough, then it may indeed be a driver issue. Please share your OS version and your architecture so that I could be of some more help - other than scaring you!
---------- Post added at 02:00 PM ---------- Previous post was at 01:56 PM ----------
Wait wait wait - have you installed the VCOM drivers?
Click to expand...
Click to collapse
Android 5 and ARM MT6753T @ 1.50 GHz 1 processor, 8 coresARM implementer 65 variant 0 part 3331 revision 4 and yes I did install numerous VCOM drivers even updated manually in the few seconds the phone keeps connected.