Related
Hi. I have the Canadian SGS2 from Virgin Mobile.
I want to update the firmware on the phone but Im unsure as to which one to use. Right now the latest firmware for this specific phone is UGKG2. My model number is GT-19100M. Im just wondering which firmware would be the best to update to. Ive been having a few issues with my phone and apparently updating the firmware is suppose to fix it (like the Wifi sharing garbage that starts every time you tun wifi on, but doesnt go away when you turn it off)
Anyway - which firmware would be best to update to, or if it would be best to just update to the latest which I think is XKH2.
Help is appreciated. Thanks!
Yeah sounds like you are on an older firmware which a lot of us battled back in May with the wifi-sharing battery drain. You'd be safe flashing any ROM really. Not sure if you prefer stock firmware only or not as some of the custom roms are great. I'd suggest KH3 as many bugs have been fixed that are evident still in your ROM. But you may want to check to see if anyone has a backup of your current rom in case you need to take it in for warranty. I have an i9000 but friends who are using i9000m Bell model are able to flash any i9000 rom without issue as there really is no difference from what I know. If you do flash, keep in mind that your boot logo will say i9000 and not i9000M, which is why you may want to look into backing up your current rom (by rooting and flashing a custom kernel to make a backup) just in case you need to flash back for warranty repair.
I use Batista Rom and really like it but I always tend to prefer custom roms. I think you'd be better on any newer rom, stock or custom to get rid of the bugs you got in that firmware you're on
so to be clear - I can download KH3 and use Odin to flash without issue, Even though Im on the stock I9100m Virgin Phone? And KH3 is a single TAR file that needs to be placed under PDA correct? I basically just want my phone to be the exact same as it is now except with the firmware updated.
Will anything be different or will it all seem the same as if I were to do a factory reset right now?
Also where KH3 is 2.3.4 and my phone is currently 2.3.3 - this wont lead to issues when using Odin?
Thanks for the replies.
Ryne said:
so to be clear - I can download KH3 and use Odin to flash without issue, Even though Im on the stock I9100m Virgin Phone? And KH3 is a single TAR file that needs to be placed under PDA correct? I basically just want my phone to be the exact same as it is now except with the firmware updated.
Will anything be different or will it all seem the same as if I were to do a factory reset right now?
Also where KH3 is 2.3.4 and my phone is currently 2.3.3 - this wont lead to issues when using Odin?
Thanks for the replies.
Click to expand...
Click to collapse
Yes you can flash KH3 using Odin under the PDA section. Depending on where you downloaded the KH3 firmware it probably wont wipe your phone so I normally do a factory reset after just to make sure it's a clean install. Make sure you back up anything you don't want to loose. Also take note that the KH3 package includes files that will change your boot up image from I9100M to I9100. If you want to keep things as close to stock as possible you can remove these files from the package since you don't really need it: boot.bin/sbl.bin/param.lfs. All you need to do is use winzip or 7zip, double click on the .tar file and delete.
Haha. Thanks for the replies.
I'm happy to say that everything went without a hitch - and all of my problems have been solved. One funny thing, was the camera shutter sound - which from what I read is suppose to be hardware related - was actually fixed as well - no more sound when opening the camera app.
Battery Improved
Wifi Sharing bug = gone
Shutter Sound = gone
Random restarts while listening to music = gone
And I got list view
Thanks guys!
im in the same boat. i just got a galaxy s2 a couple days ago. I just want to flash my phone to 2.3.4. Which firmware do i download? Where did you find KH3? thanks
Hello,
Hopefully someone can help
S3 was locked to three UK network.
Odin flashed generic newer UK firmware.
Decided to hard reset via buttons.
(noticed a message about multi cnc being applied)
Once it had gone in to the set up in ICS it keeps saying
" Messaging stopped and had to close " or something along those lines.
Tried to reset again and it wont clear.
Anyone know how to fix?
Should I odin flash the firmware again or do I have to go back to original three firmware file, then reflash the new one?
Also note my handset is now network unlocked using code supplied by provider.
Look forward to any assistance and advice, thanks
I had this problem when flashing a custom rom. The trick is to flash without wiping data, albeit this issues has been cleared up in newer versions.
Not sure what to advise if you're just after the firmware... download a custom rom and make a backup of the sms feature.
Hangon I may have the sms fix still on my phone from when I had this issue I'll upload if I can find it. Make a nandroid first though as I can't be sure it'll be transferable as I used it on the XXALE8 firmware (the only one at the time)
Edit: I no longer have it, can't find it anyway. You'll have to ask indie from omega and see if he still has the file. The one you're looking for is called "sec_csc.zip" I'm sure he'd remember if you tell him its for the sms fix.
Sorry I couldn't be of more help
Sent from my GT-I9300 using Tapatalk 2
similiar problem
Hi guys, I have a problem which is similar but not after a custom rom install. My messaging app just closes when I go to add a contact button to the right. Any ideas. thanks.
Jonny
Hello, I hope everyone is well and good. I apologize for the long post but I figured if I explained my problem in detail it would be better.
I have a samsung galaxy s3 i9300. My phone is rooted. There is a specific problem which I have been facing for months now and I have done A LOT of research on it but still cant understand it/fix it.
Basically, the problem I am facing is whenever I flash a ROM which changes my modem/baseband (such as Omega/Ultima), I lose connectivity to my carrier. (I live in Pakistan ).
I have tried the following when that happens(All during my Omega flash):
1)Check if my IMEI is intact. It is. (I have EFS backups too)
2)Check if my serial # is different. It is still the same (No need for Ariza Patch)
3)Check if my SIM works. It does on different phones.
4)Check my APN settings. They were fine. I even manually changed them to match the carriers
5)Change my CSC settings (using the playstore app). Still doesnt work.
6)Check different modems from the appropiate thread (I have tried Europe Unbranded, Middle East, Egypt and many others)
7)Restored nandroid backup of original stock 4.1.2 Sammy ROM, still not connectivity.
8)Flashed using ODIN, the stock 4.1.2 ROM for my country (Using SAM mobile)
And every time that happens, I have to send in my device to my local repair shop which takes about 4 days for me to get my device back. I am currently on Paranoid Android 3.57 but the camera connectivity problem makes me want to pull my hair out. I would like to go to OMEGA.
So before I go back to Omega and try again, I think I have figured it out but needed someones opinion on it. I understand I should test is myself first but I really need my phone for the next month for personal purposes so need a green light of sorts . I personally think since everything else is fine, maybe there is an issue and incompatibility with the RIL and the BASEBAND. According to GetRIL app from the playstore, my RIL and Baseband do not match.
RIL: I9300XXDLIB
Baseband: I9300XXELLA
Recommended: I9300XXDLIB.
Can this be the cause of me losing reception to my carrier? (This screenshot was taken on Paranoid Android)
Heres some useful info on what makes my phone work on stock:
AP: I9300XXEMA2
CP: I9300XXELLA
CSC: I9300OJVEMA1
Attached are also pictures of my settings. Thank you in advance. Please help me out someone
EDIT: The two stock screenshots I have attached below are when my s3 works perfectly fine. And the last Paranoid Android screenshot shows that as long as I dont change modems/basebands, my phone still works.
The RIL comes with the ROM and often don't match if you change the modem. I really doubt this is the problem.
You should never need to touch the RIL, but definitely never touch it on an AOSP rom.
Only use getRIL on samsung ROMs
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
The RIL comes with the ROM and often don't match if you change the modem. I really doubt this is the problem.
You should never need to touch the RIL, but definitely never touch it on an AOSP rom.
Only use getRIL on samsung ROMs
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
So I can use the GetRIL app on Omega since its a samsung based ROM?
Any idea what could be the problem?
Yeah definitely can use on omega.
Really not sure what the problem is. Maybe efs gets a bit corrupt? Try using philz recovery and backup efs before flash?
Make sure you format system before flashing.
If you have a baseband that works best, keep it at hand to flash.
If aroma installer allows you not to flash modem, choose not to.
Also perhaps try aosp camera mod by theunknown in themes and apps for s3. Maybe you don't need to.leave PA....
Sent from my GT-I9300 using Tapatalk 2
omgbuffguy said:
Hello, I hope everyone is well and good. I apologize for the long post but I figured if I explained my problem in detail it would be better.
...
Click to expand...
Click to collapse
I believe I have seen a very similar problem on a number of phones - your EFS database is "strange" (it was unlocked with some very old version of unlocker) and it needs a very special version of patched modem to work - check the ariza thread - and install the ariza patch even if apparently it is not needed!
I do format system and do a full wipe before installing ROMs.
Okay I will try the ariza patch. Just waiting to get a microsim adapter so I'm not left without a phone .
Last question. Is there a way to backup my current modem(through an app like titanium backup or otherwise) or manually insert my current modem into omegas or any other ROM? Or I force my phone to keep my modem between ROM flashing?
Sent from my GT-I9300 using xda app-developers app
The best way is to remove the modem bin file from the rom zip and the lines in the install script file (generally the script is commented so easy to find) so your modem will be unchanged.
Striatum_bdr said:
The best way is to remove the modem bin file from the rom zip and the lines in the install script file (generally the script is commented so easy to find) so your modem will be unchanged.
Click to expand...
Click to collapse
Can you please explain it a little bit? Basically after searching online, all i understood was I open up Omega's zip using a program like 7zip, navigate through and replace the bin file with my stock one?
But I dont have my stock modem in zip format. Its in the form of a nandroid..
No just remove it. There is no need to have a modem file to flash a ROM. Then go in the script installation file and remove the lines that flash modem to avoid errors during flash process. Or just remove the lines without removing the modem file it won't be flashed.
The script is in Meta-inf>com>Google>android. Generally there are comments so the lines to remove are easy to find modem is generally flashed at the end of the script.
Striatum_bdr said:
No just remove it. There is no need to have a modem file to flash a ROM. Then go in the script installation file and remove the lines that flash modem to avoid errors during flash process. Or just remove the lines without removing the modem file it won't be flashed.
The script is in Meta-inf>com>Google>android. Generally there are comments so the lines to remove are easy to find modem is generally flashed at the end of the script.
Click to expand...
Click to collapse
Okay so i just realized one thing. When i installed omega right now, and tried to change the csc using the app to my country, it reset my phone like it was supposed to, but did not change the csc. What does that mean? I dialed *#1234# and the csc remained the same. This is my original stock settings:
AP: I9300XXEMA2
CP: I9300XXELLA
CSC: I9300OJVEMA1
The current settings are:
AP: I9300XXEMF1
CP: I9300BVEMF1
CSC: I9300ONEEMF1
I used the csc changer app from the playstore. The changing the csc using the manual *#272*IMEI# does not work for some reason.
omgbuffguy said:
Okay so i just realized one thing. When i installed omega right now, and tried to change the csc using the app to my country, it reset my phone like it was supposed to, but did not change the csc. What does that mean? I dialed *#1234# and the csc remained the same. This is my original stock settings:
AP: I9300XXEMA2
CP: I9300XXELLA
CSC: I9300OJVEMA1
The current settings are:
AP: I9300XXEMF1
CP: I9300BVEMF1
CSC: I9300ONEEMF1
I used the csc changer app from the playstore. The changing the csc using the manual *#272*IMEI# does not work for some reason.
Click to expand...
Click to collapse
Maybe it's an Omega problem. have you asked in the Omega thread?
Hello everyone, first of all I should post this to Android Development section but since system tells me I do not have 10 posts, I thought I can post this here.
Well basically I was using Disaster ROM for my SGS2 (International) (I'm in Turkey), and I wanted to use Biftor Rom which was actually KitKat and I didn't know that I should install CM 10.2 or newer first to install other KitKat Roms. So I actually softbricked my phone I was only able to go into download mode. So I flashed my phone with stock 4.0.3 using Odin. But I realised that my mobile network was actually slow as hell. Sometime it can't even connect. But I was like "Oh anyways, it will go away if I flash custom rom". But it didn't. I checked my IMEI and it was there, valid. I flashed my phone 4 or 5 times more with different ROMs. But no luck.
Then I heard an app called GetRIL, because someone told me that my baseband/modem thing might be corrupted. When I opened the app I saw that it says "Unknown RIL". So what should I do? I tried setting APN manually, then automatically by my Vodafone Service. Nothing happened, still same. I do NOT want to send this phone to Samsung Service, what should I do about this situation?
Some Details : My WiFi works very well, I can call other phones, I can send messages, I can recieve calls and messages, Only thing is Mobile Data So Slow and sometimes when I turned data on it says no signal for a while. Help Please !
EDIT: Stock 4.0.3 was only PDA file. It wasn't like 3-4 files to set into Phone section, Pit section... It was only PDA. At the moment I am using BeantStalk Rom 4.4.2 KitKat XXLPS Baseband.
Thanks in advance.
Regards.
If you'd posted this in a development thread, you likely would have copped a slap (and quite rightly). Dev threads are for development stuff, not for n00bs having
problems with connectivity.
It may not even be a phone side issue, it could easily be carrier-side. Having said that, you need to try different modems. Plenty of CWM flashable modem packages on XDA you can try. Start with the modems bundled with stock roms released by your carrier (you can check these at Samfirmware, if you click to download a stock rom, it will tell you the baseband, you can then find CWM versions of these modems on XDA), test, if no better--->>> then try modems bundled with stock roms released by other carriers in your country, test, if no better--->>>then try other modems bundled with stock roms released by other carrier in other countries.
Thanks for the suggestion, today something strange happened and the signal "thing" started working somehow and i can use mobile network, but after phone calls it just disconnects for a while then reconnects again. It doesn't look so annoying so I will deal with it for a while. If it gets so annoying or goes into some crashes and other stuff I can apply what you have suggested.
I read some articles that saying XXLPS Basebands are actually not that well, If I try any other modem/baseband "thing", will it brick or something ? Or can i use 4.1.2 or 4.2.2 modem on KitKat ?
Hello all,
My partner bought a Galaxy S3 (GT-i1900) International (I live in the UK) off a friend .
We noticed that the network connection periodically failed. I noticed that the software was some of the earliest on this phone, and so i thought I'd better update it, as it was suggested that sometimes if the phone is running some of it's earliest software it can cause problems with the network connection, and as it works 95% of the time, surely it can't be the antenna? I went to software update and tried to update it there, it's then I realised the phone had been rooted, and even Kies would not update it. I came to the conclusion that perhaps my friend had tried to mess with the phone some how, and may have caused this network problem, or perhaps was trying to cure it? Who knows
I decided to flash the latest stock rom (i9300XXUGMK6_I9300OXAGMK6_I9300XXUGMK6_HOME.tar.md5) I found on Sammobile. Everything went well, the phone booted up perfectly, the only minor worry being that the first screen was in Polish, quickly remedied by changing the language to English UK. All seemed fine, until we tried to make a call. it was then we realised that there was no network connection whatsoever. I tried other sim cards with other networks - still no connection. It only shows the signal bars.
I read the forums for a couple of days and tried:
Going in Network Settings and searching for my network, 3, which it found amongst all others. it said 'Registered on Network' but then immediately flashed up '3 network not connected' or similar. fail.
Installing CWM recovery, then flashing the 2 modem zips (DDEMG2 & XXDME4) all went fine, but the phone still says 'disconnected' under Device settings Mobile network state
Using the Ariza patch. I tried this, but on the last step where it says 'just click patch' mine gets stuck on a downloading state, possibly as I'm using a stock rom I read some kernel has to be changed first? - Beyond me.
It was then I decided to scrutinize every difference between my working S3, exactly same phone on same network, and my partners.
The IMEI number was correct, something I see people have problems with. The signal strength reading are the same, suggesting the antenna at least is fine.
The serial number - Now this is the ONLY thing I can see that seems to have been changed, from the correct format, to one starting with 4df1 ...... Is this the problem, that has made the phone not register with network? In the UK phones are not locked into a specific phone number /contract and so I don't see how the network would decline a differing serial number?
Anyway that's where I'm at a phone that has no network connection, with a differing serial number.
Any help would be GREATLY appreciated.
extra[/ATTACH]
Screenshots of the device status in case that helps . SCREENSHOTS REMOVED DUE TO PRIVATE INFO
I've noticed after Googling the baseband version, it says 'New modem DDEMG2 (16/07/13) India,Sri Lanka,Bangladesh'
I live in the UK and have a network free unlocked unbranded International S3!
Surely the steps I followed to flash the modems as stated above are incorrect?!
Do I need to flash the UK one?
Anyone know which one for 4.3?
How do I do it and where would I find it?
Any help greatly appreciated!
ricrea said:
extra[/ATTACH]
Screenshots of the device status in case that helps .
I've noticed after Googling the baseband version, it says 'New modem DDEMG2 (16/07/13) India,Sri Lanka,Bangladesh'
I live in the UK and have a network free unlocked unbranded International S3!
Surely the steps I followed to flash the modems as stated above are incorrect?!
Do I need to flash the UK one?
Anyone know which one for 4.3?
How do I do it and where would I find it?
Any help greatly appreciated!
Click to expand...
Click to collapse
Go to Samsungmobile and download 4.3 BTU ( it's for Uk,simfree phones.) Flash via Odin,maybe that will help
Sent from my GT-I9300 using XDA Free mobile app
thanks so much for the response!
Im sure that romwas the btu one? Does it not seem correct? I will check again.
ricrea said:
thanks so much for the response!
Im sure that romwas the btu one? Does it not seem correct? I will check again.
Click to expand...
Click to collapse
I don't think so since setup started in Polish
Sent from my GT-I9300 using XDA Free mobile app
Attached is the screenshot the latest 4.3 btu. It wants me to download. Ive just looked on the phone, and it is the same
name exactly, and this is where I got it from. What could have gone wrong?
many thanks
ricrea said:
Attached is the screenshot the latest 4.3 btu. It wants me to download. Ive just looked on the phone, and it is the same
name exactly, and this is where I got it from. What could have gone wrong?
many thanks
Click to expand...
Click to collapse
You mean Pda,Csc and Modem are the same? Or md5 is the same?
Sent from my GT-I9300 using XDA Free mobile app
YOU ARE CORRRECT. Im downloading and the file name is different. No idea what i did.
Thanks for your help.
ricrea said:
YOU ARE CORRRECT. Im downloading and the file name is different. No idea what i did.
Thanks for your help.
Click to expand...
Click to collapse
Report back if you get your network back:thumbup:
Sent from my GT-I9300 using XDA Free mobile app
ricrea said:
YOU ARE CORRRECT. Im downloading and the file name is different. No idea what i did.
Thanks for your help.
Click to expand...
Click to collapse
Hi couple of things first you have posted screen shots with your mobile no and Imei no on I would delete them
I am pretty sure flashing another rom won't fix your issue you can easily use roms from a different region and still have full network connection but you can give it a try as suggested above.
First thing first because you have upgraded your phone your efs as changed from efs v1 to efs v2 (which you probably already know) flashing the (DDEMG2 & XXDME4) modems would not work because you need a modem later than mg4 for 4.3 roms.
What you need to try is flash a patched mk6 modem and kernel from here >> https://drive.google.com/folderview...sharing&tid=0B6MIUd7HJudAbU5YaGkzOUowMG8#list << flash then reboot if you get stuck in a bootloop factory reset and wipe cache in recovery.You could also try this >> http://forum.xda-developers.com/gal...ii-network-problem-update-sn-t1918601/page199 << look at post 1984 this is basically the same thing with a rom included and as had some success.
If the patched modems do not work and you don't have a efs backup then I would suggest you need to send for repair.
tallman43 said:
Hi couple of things first you have posted screen shots with your mobile no and Imei no on I would delete them
I am pretty sure flashing another rom won't fix your issue you can easily use roms from a different region and still have full network connection but you can give it a try as suggested above.
First thing first because you have upgraded your phone your efs as changed from efs v1 to efs v2 (which you probably already know) flashing the (DDEMG2 & XXDME4) modems would not work because you need a modem later than mg4 for 4.3 roms.
What you need to try is flash a patched mk6 modem and kernel from here >> https://drive.google.com/folderview...sharing&tid=0B6MIUd7HJudAbU5YaGkzOUowMG8#list << flash then reboot if you get stuck in a bootloop factory reset and wipe cache in recovery.You could also try this >> http://forum.xda-developers.com/gal...ii-network-problem-update-sn-t1918601/page199 << look at post 1984 this is basically the same thing with a rom included and as had some success.
If the patched modems do not work and you don't have a efs backup then I would suggest you need to send for repair.
Click to expand...
Click to collapse
Thanks. I have absolutely no idea what EFS is or how to back up. I would never have usually played with a phone like this it's just my partner was getting fed up of the connection disapearing every now and again, forcing her to reset. I have about 12 hours worth of knowledge on root access, flashing and modifying phones. I am worried I'm going to completely brick the phone. Is there anyway I can make a back of the phone as it is so that if I mess things up I can some how reset it, as at the moment I have Nothing as such. I am going to read up on EFS, I suspect due to the fact the phone was already rooted when I bought it, yet still stuck on the original software and and not updated in anyway, with a pre-exsisting network connection issue, that the phone was already un fixable. I hope not.
I will try all the steps suggested and post results.
Thanks a lot people
ps i hardly have any experience of using forums so sorry if i'm making a mess of this
ricrea said:
Thanks. I have absolutely no idea what EFS is or how to back up. I would never have usually played with a phone like this it's just my partner was getting fed up of the connection disapearing every now and again, forcing her to reset. I have about 12 hours worth of knowledge on root access, flashing and modifying phones. I am worried I'm going to completely brick the phone. Is there anyway I can make a back of the phone as it is so that if I mess things up I can some how reset it, as at the moment I have Nothing as such. I am going to read up on EFS, I suspect due to the fact the phone was already rooted when I bought it, yet still stuck on the original software and and not updated in anyway, with a pre-exsisting network connection issue, that the phone was already un fixable. I hope not.
I will try all the steps suggested and post results.
Thanks a lot people
ps i hardly have any experience of using forums so sorry if i'm making a mess of this
Click to expand...
Click to collapse
Don't worry just take your time and read all the guides if you install a custom recovery you can do a nandroid backup which is basically a full backup of everything on your phone and will restore your phone to how it was before (if you do it right) I recommend using PhilZ recovery and flash it with Odin.
tallman43 said:
Don't worry just take your time and read all the guides if you install a custom recovery you can do a nandroid backup which is basically a full backup of everything on your phone and will restore your phone to how it was before (if you do it right) I recommend using PhilZ recovery and flash it with Odin.
Click to expand...
Click to collapse
I have cwm recovery will this suffice?
I'm using Samsungtool as we speak to back up the EFS folder.
ricrea said:
I have cwm recovery will this suffice?
I'm using Samsungtool as we speak to back up the EFS folder.
Click to expand...
Click to collapse
Yep that will do fine although you are backing up a partially corrupt efs that's the reason you are not getting a signal because the efs v2 can't read the modern correctly that's why you may need a patched modem & kernel to help read it.But back it up anyway in case the efs gets any worse and gets totally corrupt.
tallman43 said:
Yep that will do fine although you are backing up a partially corrupt efs that's the reason you are not getting a signal because the efs v2 can't read the modern correctly that's why you may need a patched modem & kernel to help read it.But back it up anyway in case the efs gets any worse and gets totally corrupt.
Click to expand...
Click to collapse
That was my thinking, the IMEI isn't corrupt yet so I thought best to back up what I have. Ive also backed up using CWM.
Im now trying to flash the proper version of 4.3 for my unlocked uK S3, so im at least using the correct os.
Im flashin zip from cwm, but when i select it on my sd card, it says the following:
Finding update package...
Opening update package...
Installing update...
Installation aborted.
Any ideas why it won't install? Iv'e been Googling it
for 2 hours.
cheers
update - I spent ten hours downloading the proper rom 4.3 btu uk unlocked one, finally flashed it using mobile odin.....
started in Polish again - with no network. I think that this is standard.
Next, I am going to try to flash the patched modem.
tallman43 - do you think my strange serial number needs to be corrected? Is this possible or necessary?
Many thanks - one very tired migraine creating finger-nail biter.
Update:
I finally got the phone to work by following the instructions on the page below;
http://forum.xda-developers.com/galaxy-s3/help/guide-fixing-gt-i9300-network-4-3-stock-t2609635
The patched kernel didn't work on it's own, but the kernel I installed from this thread, along with the other two files, seemed to work, and though the phone is now registered using a much better Android 4.3, it still disconnects every now and again forcing a restart. I really wish I could work out why it does this, I'm starting to believe it may be a hardware issue now.
Is there a program that I could use to test the part of the phone that malfunctions and loses signal completely, to try and work out what is happening when the phone suddenly loses all signal and shows only a circle with a line on it (no sign)
Many thanks to all the people who helped me with this I really appreciate it.
I want to close this thread now as what I require now is off topic from the original post so many thanks for your help people.