Related
Neok UltimateS Kernel v3.9Ti
2.6.38.8, 128-1190, CFS, NOOP/CFQ/BFQv2/SIO/VR, SWAP, SLAB, HAVS, AXI, HW3D kernel included (base on Tiamat 4.0.6)
my Kernel changeset (compare Tiamat4.0.6)
- Amazing Smooth working
- Add SIO IO Scheduler
- Add VR IO Scheduler
- Change kernel optimization flags
- Compiled by 2011.10 Linaro GCC4.5.4 with -O2 and other optimization flags
- CFS Tweak (SCHED_FEAT(GENTLE_FAIR_SLEEPERS, 0))
- Applied Preempt TinyRCU & RCU Booster
- Applied RCU Optimization
- Applied RCU FAST NO HZ
- Added InteractiveX cpu governor
- Default IO Scheduler set to noop
- Config.hz 500HZ
- Improve battery efficiency
- Improve battery AVS Code (source by Intersect-Raven)
- support call record (source by cm7)
- WIFI Driver change to pershoot's kernel driver
(no problem at wifi channel 13)
- Support Voltage Control (VDD Control - /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels_havs)
- Ondemand tweak
- Support AXI,HW3D
- CPU Clock control 128-1190 (not recomanded 128Mhz at AXI Kernel)
- Improve SDHC card stability
- Ultra save battery
mesured Current-widget - minimum 2mA at sleep
3.2r1 -> 3.3 changeset
- change smartass codes and tweak
3.3 -> 3.7 changeset
- change AVS, Cpufreq Driver
- Excluded Smartass governor
- add SmartassV2 CPU Governor
- add Lagfree CPU Governor
- add Lazy CPU Governor
- VFP Compile flag change
- module tun.ko, cifs.ko
- change WIFI Driver by pershoot
3.7 -> 3.9 changeset
- High frequency cpu clock AVS Votage change for improve stability
- amplification sound
- Compiled by Linaro GCC 4.5.4 (2011.08)
- fuse module
- Other module settings changed
KERNEL works on Cyanogenmod, MIUI, Oxygen(higher version) Rom
Strongly recomand "Ondemand" governor
it's smoothest
experience "Extreme Smooth"
Better than iphone4 or GalaxyS2
Next Kernel will be change to base on CM7 Stock kernel
Happy new year!!!!!
Thanks to Cayniarb, Cyanogenmod team, intersectRaven, ch33kybutt, pershoot
Wipe dalvik-cache after update
KGPNeok Nexroid UltimateS v3.3 Kernel source (for developer only)
http://www.multiupload.com/3HIM8VGVMD
Dude, you know how to catch us
Testing it now...
Sent from my Nexus One using Tapatalk
Gotta try this one out! thanks man!
Update: I should say this is smoother. And apps loads faster on my MIUI.
what governor works best?
Markdental said:
what governor works best?
Click to expand...
Click to collapse
I stayed with smartass2 for a while now on MIUI and Wildmonks Kernel. This kernel lacks that smartass2 govenor, so i am using the tweaked ondemand one. I must say it is smoother and i didn't have any issues so far. Battery drain is ABOUT the same - cannot really give any definite opinions cuz i used it for only hours now.
But i'll report back. Try the ondemand one - its good so far.
How install it? Should i put the zip on the SD card and install it in the bootloader?
Add SmartAssV2 governor please.
Sent from my Nexus One using XDA App
[offtopic]Dude you wanna build us an msm-3.0 kernel for ICS?[/offtopic]
[offtopic] What the awesome Texasice asked, above. Please! [/offtopic]
Dude, what are r1? Is this the same kernel version built-in on your ROM as well?
ebautista said:
Gotta try this one out! thanks man!
Update: I should say this is smoother. And apps loads faster on my MIUI.
Click to expand...
Click to collapse
thanks
Markdental said:
what governor works best?
Click to expand...
Click to collapse
i strongly recommand ondemand
bunnahabhain said:
I stayed with smartass2 for a while now on MIUI and Wildmonks Kernel. This kernel lacks that smartass2 govenor, so i am using the tweaked ondemand one. I must say it is smoother and i didn't have any issues so far. Battery drain is ABOUT the same - cannot really give any definite opinions cuz i used it for only hours now.
But i'll report back. Try the ondemand one - its good so far.
Click to expand...
Click to collapse
smartass is bad working on my kernel
strongly recommand ondemand
giganielsie said:
How install it? Should i put the zip on the SD card and install it in the bootloader?
Click to expand...
Click to collapse
update on recovery mode
cpm said:
Add SmartAssV2 governor please.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
i tried to add smartassv2 but it has some problem
sorry
texasice said:
[offtopic]Dude you wanna build us an msm-3.0 kernel for ICS?[/offtopic]
Click to expand...
Click to collapse
that's very interesting
if you provide kernel source,
i'm try to build kernel
revthanki said:
[offtopic] What the awesome Texasice asked, above. Please! [/offtopic]
Click to expand...
Click to collapse
alisabki said:
Dude, what are r1? Is this the same kernel version built-in on your ROM as well?
Click to expand...
Click to collapse
it's little change
added Improve SDHC card stability on r1 version
test kernel is out
-change smartass codes and tweak
but still strongly recommand ondemand
i tried to smartassv2 but it has critical problem
not include smartassv2
it's unsigned packge
kgp700 said:
test kernel is out
-change smartass codes and tweak
but still strongly recommand ondemand
i tried to smartassv2 but it has critical problem
not include smartassv2
it's unsigned packge
Click to expand...
Click to collapse
need to wipe dalvik cache too right?
alisabki said:
need to wipe dalvik cache too right?
Click to expand...
Click to collapse
recommand that
You say it will work with oxygen and you thank ch33kybutt in your post, does that mean it'll work on his oxygen1mod?
pongalong said:
You say it will work with oxygen and you thank ch33kybutt in your post, does that mean it'll work on his oxygen1mod?
Click to expand...
Click to collapse
yes, this kernel working on oxygen1mod
but old version is not working
working on OxygeN1mod-2011.11.26 version or higher version
Great Job Dude! Didnt know u start a kernel!
Sent from my GT-I9000 using Tapatalk
DaxElectro said:
Great Job Dude! Didnt know u start a kernel!
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
thanks!!
This seems to break my wifi. After flashing, everything seems okay but wifi just says 'error' when I try to turn it on. Anyone else have this?
I am on CM7 newest nightly
Come to think about it, ever since I flashed one of his previous builds, every time I try to flash a diff kernel I get this problem. Think I had this problem with one of IR's kernels...
aujbman said:
This seems to break my wifi. After flashing, everything seems okay but wifi just says 'error' when I try to turn it on. Anyone else have this?
I am on CM7 newest nightly
Come to think about it, ever since I flashed one of his previous builds, every time I try to flash a diff kernel I get this problem. Think I had this problem with one of IR's kernels...
Click to expand...
Click to collapse
4 hours with lastest kernel (r2) and Wifi ON. No problems at all.
My SGA is on GB 2.3.6 (Russian ROM) and I have installed No-Frills CPU, but I am not able to use it to full potential. The Developer says I need some custom Kernels for this.
Which Kernels are these? Is it ok to use diff kernels?
what do u mean by "full potential"?
afaik for changing cpu scaling freq, cpu governor or changing disk io scheduler, u can do it even on stock kernel. maybe the selection is a little bit less, but it'll definitely works.
i dont know if cpufrills can also change cpu voltage, even so we dont have any kernel that support cpu voltage changing yet.
You might have seen No-Frills cpu, but few users are getting more governors than me using some diff kernel.
anyways, I want some other way, so that my cpu cuts down frequency really down when phone is locked, and jump up accoring to requirement. (Just like Cool'n quiet in AMD)
then u might wanna install cfroot kernel. it contain smartassv2 and interactiveX that do have automatic cpu down scaling when screen off.
but u can also set up profile to do it manually on other governors using setcpu.
What about the kernel by squadzone supposedly optimised for gingercruzt but it works for cm7 and has 6 IO schedulers, but cf-root is best for stock
Sent from my GT-S5830 using xda premium
My phone is already rooted and got busybox. So if I use cfroot, what would the affect on previous root and busybox? How do I backup current kernel if I need to go back.
animal_he said:
My phone is already rooted and got busybox. So if I use cfroot, what would the affect on previous root and busybox? How do I backup current kernel if I need to go back.
Click to expand...
Click to collapse
no, it wont affect root as it also give root.
and just use clockworkmod recovery to create backup of ur whole rom. and if u just wanna restore kernel use the advance restore to restore just the kernel itself
an0nym0us_ said:
then u might wanna install cfroot kernel. it contain smartassv2 and interactiveX that do have automatic cpu down scaling when screen off.
but u can also set up profile to do it manually on other governors using setcpu.
Click to expand...
Click to collapse
Hey, I'm using ICS Final and I only have the InteractiveX and normal Interactive options but not the smartassV2. Where can I get it? I'm using the Smartass governor out of all of them. What is the difference between the two? (V1 & V2)
Thanx a lot for all the info mate. Can u just help me find one appropriate for my phone?
Version 2.3.6
Build number .XXKPP
SuperAce609 said:
Hey, I'm using ICS Final and I only have the InteractiveX and normal Interactive options but not the smartassV2. Where can I get it? I'm using the Smartass governor out of all of them. What is the difference between the two? (V1 & V2)
Click to expand...
Click to collapse
Install zImage-Mod v1.0 (you can find it in the Development Section).
As the title says, which is the best combo rom (gingerbread roms only, I don't like ICS!) + kernel is the most battery friendly? (I'm on XM)
Now I'm on CM 7.2 with rage kernel but I' ve thought about flush 6.5
Thanks everybody!
Which phone?
From what I have heard, Spartan and Hybrom seem to be most battery-friendly GB ROMs, but I occured some bugs on Spartan and currently using stock system at all.
Someguyfromhell said:
Which phone?
From what I have heard, Spartan and Hybrom seem to be most battery-friendly GB ROMs, but I occured some bugs on Spartan and currently using stock system at all.
Click to expand...
Click to collapse
I don't like hybrom So is the stock a good choice too?
Hi, you should try NeroDroid with X kernel, I tried it and liked it a lot, but Im waiting for universal V2
Il Giulione said:
I don't like hybrom So is the stock a good choice too?
Click to expand...
Click to collapse
Yea, stock is also great, if you root it and customize as much as you want.
Someguyfromhell said:
Yea, stock is also great, if you root it and customize as much as you want.
Click to expand...
Click to collapse
Yup, if you don't wanna be dealing with bugs or stuff like that stick with stock like hes says
The only thing I didn't like about my stock is that battery didn't last long
Now I've flashed flush 6.5 ... I' ll say to you how it is about battery and performance
PS This is my girlfriend's phone, mine is the O1 so I can't understand what ''stock'' means
Il Giulione said:
Now I've flashed flush 6.5 ... I' ll say to you how it is about battery and performance
PS This is my girlfriend's phone, mine is the O1 so I can't understand what ''stock'' means
Click to expand...
Click to collapse
Test and report results...
Stock is basically what came with the phone.
Untouched ROM.
Tried all ROMS available for Xperia Mini with all possible kernels.
I think the best combination for Batter life is
NeroDroid Rom with X Kernel.
Set these frequencies
Min 134Mhz
Max 1.0 Ghz.
Smartassv2 Governor
I/O Schedulers - deadline
You are already the second who says to me to try nerodroid and x kernel...so...I'm doing it
Flush sucks, gps doesn't work and the developer doesn't want believe me
singh_dd93 said:
Tried all ROMS available for Xperia Mini with all possible kernels.
I think the best combination for Batter life is
NeroDroid Rom with X Kernel.
Set these frequencies
Min 134Mhz
Max 1.0 Ghz.
Smartassv2 Governor
I/O Schedulers - deadline
Click to expand...
Click to collapse
but X kernel do reboot my phone... mini pro, i dont know why!!! since tha day i installed it.
I use Clean 'n' Tweaked - 4.0.2.A.0.69 - v4.1 with X kernel 2.6.32.59
Don't forget to flash the apropriate x-kernel wlan module AFTER installing the target ROM in CWM.
Standby battery drain is around 1% every 3h without 3G. I use SetCPU to switch CPU frequencies and Governor when the display goes off:
Display on: CPU: 249 - 1017 Governor: smartassV2
Display off: CPU: 134 - 364 Governor: ondemand
This way i have great performace when i operate the Phone and low power consumption when using it as mp3 player.
Haltlos said:
I use Clean 'n' Tweaked - 4.0.2.A.0.69 - v4.1 with X kernel 2.6.32.59
Don't forget to flash the apropriate x-kernel wlan module AFTER installing the target ROM in CWM.
Standby battery drain is around 1% every 3h without 3G. I use SetCPU to switch CPU frequencies and Governor when the display goes off:
Display on: CPU: 249 - 1017 Governor: smartassV2
Display off: CPU: 134 - 364 Governor: ondemand
This way i have great performace when i operate the Phone and low power consumption when using it as mp3 player.
Click to expand...
Click to collapse
i dont know why my phone reboots with X kernel... but ok with Rage Kernel!!! just dat X kernel battery is good!
whalesplaho said:
i dont know why my phone reboots with X kernel... but ok with Rage Kernel!!! just dat X kernel battery is good!
Click to expand...
Click to collapse
did you try flashing stock and then X kernel.
Check X kernel with stock and report
singh_dd93 said:
did you try flashing stock and then X kernel.
Check X kernel with stock and report
Click to expand...
Click to collapse
i wipe data/factory reset... den flash kernel & after flash kernel!!!
whalesplaho said:
i wipe data/factory reset... den flash kernel & after flash kernel!!!
Click to expand...
Click to collapse
You don't have to wipe data before flashing kernel. Not needed at all.
Sent from my Xperia Live using xda premium.
Someguyfromhell said:
You don't have to wipe data before flashing kernel. Not needed at all.
Sent from my Xperia Live using xda premium.
Click to expand...
Click to collapse
i did dat cos i was told to flash stock & i thought doing dat ll return my phone to stock!
I'm using Rage 2.8 on Spartan ROM 2.0
134Mhz-1Ghz smartassv2 or brazilianwax
Scheduler is SIO
I've used Xkernel before Rage 2.8 came out, because I felt it was more batt friendly. But with v2.8 I think that Rage is way better. Battery life is great!
Especially with Spartan ROM since it comes with minimal app load, and is tweaked and fast as hell
I never flashed my kernel before with my previous phone (htc desire).
It seems more important for these xperia phones, is this correct? I 'm currently the owner of a Mini Pro.
swimon said:
I never flashed my kernel before with my previous phone (htc desire).
It seems more important for these xperia phones, is this correct? I 'm currently the owner of a Mini Pro.
Click to expand...
Click to collapse
Some custom roms require custom kernels, that's why they are needed sometimes, or you can use em on stock rom to increase performance, battery life, to have recovery installed, etc...
Hello. sorry if it has been already posted, but I want only "up-to-date" answers.
I have some questions:
1. Which is the best governor to use ( for this kernel ) for a balance between battery and performance ( I use lulzactive right now, I heard that it's very good for a balance between those two but it seems like ondemand is doing a lot better when it comes to battery life )
2. I don't mind OC'ing the CPU but the GPU yes. I want to play games such as Real Racing 3 with acceptable FPS, so I need a boost for the GPU. What settings to use here?
Thanks.
Ondemand and row.
Don't know what governor does Siyah have,but you need to try out "cfq" scheduler with "slp" governor.I think only Apolo kernel has that.
what do you mean by 'row' ?
@GamingDj siyah kernel governors:
ondemand
pegasusq
lulzactive
lulzactiveq
conservative
Scheduler row
Gov ondemand
Andrew is right...from these Row with ondemand is the best.Are you on Stock ROM 4.1.2? If so,then I recommend you trying out Apolo.Maybe extreme v0 or Regular.
Thanks.
I may try thoses ROM but I enjoy the stock ROM, I would change it just for better performance in gaming ( and as I know, the ROM's aren't for that )
edit: oops Apolo is a kernel.. well, as I know, the Siyah Kernel is the best for this phone, isn't it?
but still: no overclock settings for the GPU?
burningcow said:
Thanks.
I may try thoses ROM but I enjoy the stock ROM, I would change it just for better performance in gaming ( and as I know, the ROM's aren't for that )
edit: oops Apolo is a kernel.. well, as I know, the Siyah Kernel is the best for this phone, isn't it?
but still: no overclock settings for the GPU?
Click to expand...
Click to collapse
I think dorimanx is the best. It's siyah based and updated alot by a cracking dev
i may give it a try. let's hope it's better.
If you like stock then you should try out alliance or biftor ect ect. These are custom stock roms that work lovely and if you mix it up with a little dorimanx you end up with a kick ass phone. Not to put down Apollo kernel as that is really good for battery but Dori is better for tuning cpu/gpu ov/uv.
burningcow said:
Thanks.
I may try thoses ROM but I enjoy the stock ROM, I would change it just for better performance in gaming ( and as I know, the ROM's aren't for that )
edit: oops Apolo is a kernel.. well, as I know, the Siyah Kernel is the best for this phone, isn't it?
but still: no overclock settings for the GPU?
Click to expand...
Click to collapse
With siyah kernel flashed in ur phone u get an app called extweaks or stweaks. This app too was developed by gokhan moral. U can go to GPU tab and change the GPU frequency step. Be careful and don't go beyond 400mhz. It may heat up your phone very much. I use this settings for increasing the smoothness of the phone. And one more thing. Gradually increase the steps.Don't keep the 1st step as 300 or 400. I recommend 160 or 200.
andrewwright said:
If you like stock then you should try out alliance or biftor ect ect. These are custom stock roms that work lovely and if you mix it up with a little dorimanx you end up with a kick ass phone. Not to put down Apollo kernel as that is really good for battery but Dori is better for tuning cpu/gpu ov/uv.
Click to expand...
Click to collapse
hmm.. i really want to try dorimanx, but, can i flash it over the siyah or i have to somehow delete siyah first?
is the stock ROM that bad? i see that you insist changing it.. as i said: i would change the ROM only if it has performance improvements ( in games, because the stock ROM is doing pretty good in others ) but as I know ROM's aren't for gaming.
@santhosh502 i know it's all about the frequencies. but i need all of the steps. not just the first one. what are you using?
Nope just flash it
andrewwright said:
Nope just flash it
Click to expand...
Click to collapse
okay, thanks, what settings do you recommend for this kernel?
On demand and row
andrewwright said:
On demand and row
Click to expand...
Click to collapse
thanks again. i will try it, let's hope it's better than Siyah.
Just remember that siyah is for stock and not cm/aokp roms. Dorimanx is for both. 8.xx is stock and custom and 9.xx is for custom only.
I use siyah kernel. But u can download stweaks in play store too. The link for steps is here. Be careful as ur hands might get burned. http://forum.xda-developers.com/showthread.php?t=1657491
I understand that you can use siyah with cm/aokp but not supported by dev. Dorimanx is a much safer bet for stability
andrewwright said:
I understand that you can use siyah with cm/aokp but not supported by dev. Dorimanx is a much safer bet for stability
Click to expand...
Click to collapse
Is it true that I can't run Dorinmanx 9.xx on stock ROM?
And.. what do you think about CM ROM? Is it worth trying?
Custom Cyanogenmod12 kernel for the LG G Pad 8.3 V510 (GPE)
Updated 2-21-15 Added FastCharge and three other IO Schedulers to play with. Made Row the default scheduler, and turned off Knock-on by default. Use my app from the second post to activate Knock-on after each boot.
The CyanogenMod12 ROM can be downloaded from HERE
Thank you @aidfarh for all of your hard work!
Custom Kernel built from the cyanogenmod12 kernel source - Download Below
*NOTE - This kernel currently works with stock lollipop as well!
Features:
Flash Through Recovery!
Interactive Governer as default
Compiled using Linaro Toolchain cortex a15-4.9.3
o3 Compile optimizations
Knock-on enabled through app in second post
Fastcharge added as option - enable using Trickstermod
Row, Sio, Fiops, and Zen IO Schedulers added - trickstermod to change
Sound Control using TricksterMod
LCD Screen Control using TricksterMod
Fsync On/Off using Trickstermod (off as default)
User Space Voltage Control - TricksterMod or my 88sleektweaks init.d script to change.
Exfat support (2-4-15 and later CyanogenMod version)
Lots of optimizations with more to come!
The kernel source and Commits that show all changes for this kernel can be found here:GITHUB
Prerequisites
Unlocked bootloader
Root
Install Busybox for init.d support
TricksterMod is recommended for changing settings
How does this work?
Start by making a Backup of your boot in recovery, then:
Flash the latest version in Recovery . Proceed to the downloads below, download to your tablet, reboot into recovery and install the zip --That simple!
if you want to build your own kernel start to finish with complete instructions, you can follow my guide for rolling your own kernel HERE
Please hit "Thanks" to show your support!
DOWNLOAD HERE:
ATTACHED FILES
Knock-on app for my kernel can be downloaded here.
To add my sleektweeks init.d file, and/or the Zipalign file, see my post: HERE
Updated -SleekCyan2 - to include exfat support, LCD screen control, and further optimizations for GPU and the linaro toolchain.
Updated - SleekCyan3 - to include knock-on by default, removal of some debugging, quicker deep sleep. (better battery?)
Thanks for the cm12 kernel. I'm liking you're LP kernel, but will try this one as well...
galaxys said:
Thanks for the cm12 kernel. I'm liking you're LP kernel, but will try this one as well...
Click to expand...
Click to collapse
Thank you! Let me know what you observe.
galaxys said:
Thanks for the cm12 kernel. I'm liking you're LP kernel, but will try this one as well...
Click to expand...
Click to collapse
Thank you! Let me know what you observe.
Exfat support for sdcards now works out of the box with CyanogenMod version 2-4-15 and later.
So I flashed this last night when I saw you posted it recently and this morning I checked it and it had zero battery drain overnight, very nice. Can't wait to dig in a little deeper when I get time. Between this and the new CM12, 2015 is really shaping up to be a good year for the old (but great) v510, finally, thank you.
Sleekmason:
I should be able to use the same sleektweaks and zipalign stuff from the Lollipop kernel, correct?
Thanks
techinv said:
Sleekmason:
I should be able to use the same sleektweaks and zipalign stuff from the Lollipop kernel, correct?
Thanks
Click to expand...
Click to collapse
Yep! The latest 88sleektweaks has voltage control table as well ( already adjusted down a bit to the settings I use). These can be changed here but be careful! TricksterMod is useful for making the initial changes to test as they won't get restored on boot. If you change them in the file and something goes wrong, you will have to remove the file using twrp.
sleekmason said:
Thank you! Let me know what you observe.
Click to expand...
Click to collapse
Just tried it with CM12 and it's a super V510 combo! Feels fast and smooth! Thanks for your XDA development & contribution.
UPDATED 2-12-15
Added Row IO Scheduler and Sound control - Change using trickster or in settings for row, and in trickster for sound control. Also added upstream fixes.
Is Row better than cfq? I think maybe it is . . . Battery will be the deciding factor for me. If anybody wants Row default for this kernel, let me know and I will implement it on next version. Regards,
I'll give it a go tomorrow, currently I've tweeked to Ondemand and ReadAhead to 512. Cool
galaxys said:
I'll give it a go tomorrow, currently I've tweeked to Ondemand and ReadAhead to 512. Cool
Click to expand...
Click to collapse
Are you finding On-demand better than Interactive? Seems like interactive is smoother to me. Also, keep in mind that the larger the read ahead the more battery is used.
sleekmason said:
Are you finding On-demand better than Interactive? Seems like interactive is smoother to me. Also, keep in mind that the larger the read ahead the more battery is used.
Click to expand...
Click to collapse
Not much difference maybe slightly faster but still analyzing with the new rom update...
BTW, did you see my post cm12 rom about GPS? Maybe you can take a look...
Row is working very good & smooth so far (speed, smooth & stable are my priorities and then battery). Think I'll stay with it; up to you if u want it as default.
galaxys said:
Row is working very good & smooth so far (speed, smooth & stable are my priorities and then battery). Think I'll stay with it; up to you if u want it as default.
Click to expand...
Click to collapse
Those who speak up get to choose! Row it is! Will update including row as default next compile.
Great kernel guide thread for those of us who like to mod & test settings in Sleek's Cool kernels!
http://forum.xda-developers.com/lg-...gn=Feed:+xda-developers/ShsH+(xda-developers)