I came from cm13 and i suddenly think of returning back to stock lollipop. After a few days, I realize cm13 is a lot better. I downgraded back to kitkat and unlocked the bootloader the way I did before. Before, it was successful. But now, when I flash TWRP and reboot to recovery using flashify, it shows security boot error. I upgraded to stock lollipop and tried it unlocking bootloader there. I flashed TWRP but when I entered TWRP, I cannot reboot back to system. I cannot get out of recovery!! Pleasee help... I want to get cm13 back
ShadowBlade_20 said:
I came from cm13 and i suddenly think of returning back to stock lollipop. After a few days, I realize cm13 is a lot better. I downgraded back to kitkat and unlocked the bootloader the way I did before. Before, it was successful. But now, when I flash TWRP and reboot to recovery using flashify, it shows security boot error. I upgraded to stock lollipop and tried it unlocking bootloader there. I flashed TWRP but when I entered TWRP, I cannot reboot back to system. I cannot get out of recovery!! Pleasee help... I want to get cm13 back
Click to expand...
Click to collapse
actually i gave a answer for you http://forum.xda-developers.com/showpost.php?p=64674426&postcount=2
u even can flash kdz ? if yes, try it and check if your bootloader unclocking method, file, is correct.
You could brick your phone.
Related
I came from cm13 and i suddenly think of returning back to stock lollipop. After a few days, I realize cm13 is a lot better. I downgraded back to kitkat and unlocked the bootloader the way I did before. Before, it was successful. But now, when I flash TWRP and reboot to recovery using flashify, it shows security boot error. I upgraded to stock lollipop and tried it unlocking bootloader there. I flashed TWRP but when I entered TWRP, I cannot reboot back to system. I cannot get out of recovery!! Pleasee help... I want to get cm13 back
ShadowBlade_20 said:
I came from cm13 and i suddenly think of returning back to stock lollipop. After a few days, I realize cm13 is a lot better. I downgraded back to kitkat and unlocked the bootloader the way I did before. Before, it was successful. But now, when I flash TWRP and reboot to recovery using flashify, it shows security boot error. I upgraded to stock lollipop and tried it unlocking bootloader there. I flashed TWRP but when I entered TWRP, I cannot reboot back to system. I cannot get out of recovery!! Pleasee help... I want to get cm13 back
Click to expand...
Click to collapse
you should write this in other section but i want to help you.
maybe try to flash stock kdz again if you still can then check if bootloader method you use is correct but if was not you will brick your phone.
I have a Z5C(E5803) that was originally able to unlock the bootloader and let me flash ROMs, specifically the Cyanogen ROM that CTXz has been working on. I ran out of power and got stuck in some kind of nasty bootloop yesterday that prompted me to re-flash boot.img and TWRP.
After I did these things I left it charging for a few hours and it was able to boot into TWRP where I then restored it to a backup of the basic Xperia pre-loaded ROM.
This all worked fine, thought I could boot into TWRP and just flash the Cyanogen zip again. I can get into TWRP just fine but I attempt to flash Cyanogen I get an "ERROR 7"
I have since done several wipes, gotten into the bootloader settings by entering that code in the dialer and have seen that bootloader unlock = no. I distinctly remember bootloder unlocking being allowed the first time I installed CM on my device, what could have caused this?
I was able to use it with fastboot anyway and install CM13 again, maybe this was a bug?
When I tried using oem unlock command with fastboot it said my device was already rooted even though I had just restored from a backup, and then I just proceeded normally from there.
use CM13 official Recovery to FLASH CM13.
also i don't think so twrp3.0.2 is out there for z5c. are you using any other variants Twrp? (YUGA ? )
hello,
my current situation: i am on oos 2.2.3, not rooted, twrp 3.0.1-0 running.
i want to install a 3.x.x oos, version, i wanted to install 3.1.2 first, cause oneplus site i can install that directly form 2.2.3 (no such info on 3.1.3 and 3.1.4)
when i try to install with twrp, it says "this package is for "Oneplus" devices, this is a "ONE"
i think i am using the wrong twrp version. tried to install the newest (3.0.3-0), but this one doenst work, can not boot into it.
please help
Best is to fastboot flash old OOS 2 recovery
Then, with it, flash the 2.2.3. Reboot. then Flash 3.1.4. with the recovery
First you need to flash official oxygen os recovery for android 5.1 lollipop https://s3.amazonaws.com/oxygenos.oneplus.net/OPX_recovery.img Now you will be able to boot the phone. Now download and copy oxygen os 3.1.4 to internal memory http://downloads.oneplus.net/devices/oneplus-x/ Reboot into recovery and flash the rom.
Aftrr successful flash of oos3 boot into fastboot and flash latest twrp from twrp website.. This time it should work.
thanks, it work with the costum recovery.
on 3.1.4 i installed a slightly older twrp form sparkfire (3.0.2 i think), rooting and installing xposed worked fine though.
is it important to have the latest twrp?
and another question. at some point in my hours long struggel with updating my opx i softbricked it. i guess my bootloader was locked and i tried to install another recovery. i expected it to be still unlocked from my first rooting months ago. when does the bootloader lock?
dooglrig said:
thanks, it work with the costum recovery.
on 3.1.4 i installed a slightly older twrp form sparkfire (3.0.2 i think), rooting and installing xposed worked fine though.
is it important to have the latest twrp?
and another question. at some point in my hours long struggel with updating my opx i softbricked it. i guess my bootloader was locked and i tried to install another recovery. i expected it to be still unlocked from my first rooting months ago. when does the bootloader lock?
Click to expand...
Click to collapse
It is always recommended to use latest (bugs free)
You can use this one https://dl.twrp.me/onyx/twrp-3.0.3-0-onyx.img latest as of now. And no u didn't brick ur phone. U flashed a new twrp for old bootloader version. Thts y u got stuck with oneplus logo. Its all oneplus things. Its always preferred to use stock recovery for updating bootloader which is safe. Check your bootloader state by giving this cmds "fastboot oem device-info"
cva_kabil said:
It is always recommended to use latest (bugs free)
You can use this one https://dl.twrp.me/onyx/twrp-3.0.3-0-onyx.img latest as of now. And no u didn't brick ur phone. U flashed a new twrp for old bootloader version. Thts y u got stuck with oneplus logo. Its all oneplus things. Its always preferred to use stock recovery for updating bootloader which is safe. Check your bootloader state by giving this cmds "fastboot oem device-info"
Click to expand...
Click to collapse
Hmm isnt that for new BL as well ?
NielDK said:
Hmm isnt that for new BL as well ?
Click to expand...
Click to collapse
Yes it is. OP said that he's on OOS 3.1.3, so already on the new BL.
Obtained phone with buggy touchscreen. Flashed CM to see if it fixed it. Didn't. Trying to go back to full stock for return
Recovered stock device via TWRP then installed what I thought was a stock recovery.img, except it wasn't - it was a CM recovery
The CM recovery only lets me boot to recovery or the bootloader - no other options are functional
In the bootloader the FRP is locked and doesn't let me flash TWRP or stock recovery
What should I do to replace the CM recovery with TWRP or stock when the FRP is locked?
THanks
funkyhunky said:
Obtained phone with buggy touchscreen. Flashed CM to see if it fixed it. Didn't. Trying to go back to full stock for return
Recovered stock device via TWRP then installed what I thought was a stock recovery.img, except it wasn't - it was a CM recovery
The CM recovery only lets me boot to recovery or the bootloader - no other options are functional
In the bootloader the FRP is locked and doesn't let me flash TWRP or stock recovery
What should I do to replace the CM recovery with TWRP or stock when the FRP is locked?
THanks
Click to expand...
Click to collapse
Go into developer options and enable OEM unlocking
---------- Post added at 02:26 AM ---------- Previous post was at 02:17 AM ----------
funkyhunky said:
Obtained phone with buggy touchscreen. Flashed CM to see if it fixed it. Didn't. Trying to go back to full stock for return
Recovered stock device via TWRP then installed what I thought was a stock recovery.img, except it wasn't - it was a CM recovery
The CM recovery only lets me boot to recovery or the bootloader - no other options are functional
In the bootloader the FRP is locked and doesn't let me flash TWRP or stock recovery
What should I do to replace the CM recovery with TWRP or stock when the FRP is locked?
THanks
Click to expand...
Click to collapse
I have just now read your post thoroughly you said that the touchscreenis buggy,is it twrp or in the system
If it's twrp don't worry I too have the same problem in the version I tried eg. 3.0.2.0,3.0.1.0,3.0.0.0
But if it's in system try factory resetting
And change smart power saving mode to performance
But to unlock frp(i suppose you have already unlocked your bootloader) just go into developer options and enable OEM unlocking option
Ok I got the stock recovery back:
I booted into the bootloader and used the local command window to fastboot boot a twrp image from my computer
With TWRP booted (but not installed) on my phone I put in a sd card with a stock recovery image, and used the booted TWRP to install the stock recovery
Unfortunately, I have not figured out how to relock the boot loader, but hopefully they overlook/don't care about that for a return - I did not root the phone
U can relock bootloader in honor5x
I think I have a similar problem. I bought new KIW-L24, I unlocked bootloader, flashed twrp to go to RR Nougat ROM. When I started Twrp to install ROM it said "Comparing tarz 2.2 to 2.5" so I read that I had update to MM.
I went to settings>updater and started update to M331 EMUI 4.0 ROM on the twrp recovery instead of stock recovery. I have M331 ROM now but I can't fastboot the TWRP recovery anymore. It sat twrp installed successful but the EMUI Stock recovery opens up when hitting Vol. + and Power instead of Twrp.
I noticed fastboot menu shows Phone unlocked but it does not say FRP Unlocked anymore. Does that prevent me from installing custom recovery now? Please...any help is appreciated.
cyrusalmighty said:
I think I have a similar problem. I bought new KIW-L24, I unlocked bootloader, flashed twrp to go to RR Nougat ROM. When I started Twrp to install ROM it said "Comparing tarz 2.2 to 2.5" so I read that I had update to MM.
I went to settings>updater and started update to M331 EMUI 4.0 ROM on the twrp recovery instead of stock recovery. I have M331 ROM now but I can't fastboot the TWRP recovery anymore. It sat twrp installed successful but the EMUI Stock recovery opens up when hitting Vol. + and Power instead of Twrp.
I noticed fastboot menu shows Phone unlocked but it does not say FRP Unlocked anymore. Does that prevent me from installing custom recovery now? Please...any help is appreciated.
Click to expand...
Click to collapse
Just delete the google account in your phone and do a factory reset. Later reboot but skip adding gmail . This will unlock frp .
gopinaidu77 said:
Just delete the google account in your phone and do a factory reset. Later reboot but skip adding gmail . This will unlock frp .
Click to expand...
Click to collapse
Can the frp relocking stop me from flahing twrp? Or is it this stock rom I am on? Do you know if other people have problems flashing twrp on L24 B311 MM update? Could I have caused my issue when I updated to the official rom using the twrp? I didn't think the update would work without stock recovery but it did. I did factory resets but I still can't install install any custom recovery. Can I go back to earlier stock rom?
I followed your instructions and deleted Google accounts and factory restored. I go to bootloader and it says Phone Unlocked but does not say FRP unlocked anywhere. I flshed twrp anyways and although cmd window shows it flashed OK when I reboot the stock EMUI Recovery opens again.
Edit: Now I use adb and mfastboot.exe to open twrp and do a backup. I don't know if I install a different rom if I will able to finally install twrp. I wonder if this 331 stock rom is the problem or FRP is issue here. Never had this problem with my Gold Honor 5X.
cyrusalmighty said:
I followed your instructions and deleted Google accounts and factory restored. I go to bootloader and it says Phone Unlocked but does not say FRP unlocked anywhere. I flshed twrp anyways and although cmd window shows it flashed OK when I reboot the stock EMUI Recovery opens again.
Edit: Now I use adb and mfastboot.exe to open twrp and do a backup. I don't know if I install a different rom if I will able to finally install twrp. I wonder if this 331 stock rom is the problem or FRP is issue here. Never had this problem with my Gold Honor 5X.
Click to expand...
Click to collapse
Plz boot recovery first and install recovery from twrp . This may do some help
gopinaidu77 said:
Plz boot recovery first and install recovery from twrp . This may do some help
Click to expand...
Click to collapse
Ok. Ive never done this this way. When installing Twrp image it asks where to install? Select Partition to Flash image: Boot, OEMinfo, or Recovery. Do I just press Recovery only?
cyrusalmighty said:
Ok. Ive never done this this way. When installing Twrp image it asks where to install? Select Partition to Flash image: Boot, OEMinfo, or Recovery. Do I just press Recovery only?
Click to expand...
Click to collapse
Select only recovery
ok I installed image, chose recovery, and installed superSU_2.46.zip but it still only boots up EMUI Stock recovery. Unfortunately its stuck in bootloop now so now I cant even adb/fastboot into twrp anymore. Now my only option is holding vol +- and Power to install update from sd card (dload folder). I just dont kmow what FW file to use.
cyrusalmighty said:
ok I installed image, chose recovery, and installed superSU_2.46.zip but it still only boots up EMUI Stock recovery. Unfortunately its stuck in bootloop now so now I cant even adb/fastboot into twrp anymore. Now my only option is holding vol +- and Power to install update from sd card (dload folder). I just dont kmow what FW file to use.
Click to expand...
Click to collapse
Fastboot boot recovery.img dint helped?
gopinaidu77 said:
Fastboot boot recovery.img dint helped?
Click to expand...
Click to collapse
I ended up trying everything. I held volume - and Power to force Fastboot&Rescue Mode. I did fastboot boot twrp_kiwi.IMG. When in Twrp I install twrp_kiwi.IMG (For permanent Install) but EMUi recovery still stays.
I believe the custom recovery is installing but NOT where it needs to install.(Probably a different partition). I noticed a erecovery when I extracted an update file with HuaweiExtractor with does program. I DID get out of Bootloop by applying update from SD card (Force Update Volume - and Plug in USB cable). I rolled the FW back to B130 Emui 3.1 Firmware. I still need to fash Twrp and update this phone now.
cyrusalmighty said:
I ended up trying everything. I held volume - and Power to force Fastboot&Rescue Mode. I did fastboot boot twrp_kiwi.IMG. When in Twrp I install twrp_kiwi.IMG (For permanent Install) but EMUi recovery still stays.
I believe the custom recovery is installing but NOT where it needs to install.(Probably a different partition). I noticed a erecovery when I extracted an update file with HuaweiExtractor with does program. I DID get out of Bootloop by applying update from SD card (Force Update Volume - and Plug in USB cable). I rolled the FW back to B130 Emui 3.1 Firmware. I still need to fash Twrp and update this phone now.
Click to expand...
Click to collapse
So the frp lock still exists is it?
gopinaidu77 said:
So the frp lock still exists is it?
Click to expand...
Click to collapse
Yes I think the FRP Lock is on. It only says: Phone Unlocked. Before it used to say hone Unlocked and FRP unlocked.
cyrusalmighty said:
Yes I think the FRP Lock is on. It only says: Phone Unlocked. Before it used to say hone Unlocked and FRP unlocked.
Click to expand...
Click to collapse
Have u removed gmail account ?
gopinaidu77 said:
Have u removed gmail account ?
Click to expand...
Click to collapse
Yes I had removed gmail account. I went to settings>accounts and deleted Google and all other accounts. Does FRP Unlock when you unlock Bootloader?
cyrusalmighty said:
Yes I had removed gmail account. I went to settings>accounts and deleted Google and all other accounts. Does FRP Unlock when you unlock Bootloader?
Click to expand...
Click to collapse
U can try that
I really don't know what is left to do, I always end up with a bootloop and have to repair my phone with flashtool. I have tried flashing twrp by adb/fastboot, temporarily booting to twrp, flashing different twrp files after repair.... I always get boot loop. Help please :/
Once I had my phone rooted by oneclickroot support, then I started to get play store crashed constantly. Once I booted to recovery and when try to reboot, got a bootloop. I tried to flash a new rom, so found a stock rom for Z5C and flashed it by twrp. But after a reboot I lost the twrp recovery this time. Then I tried to flash the recovery myself using abd, following the basics; fastboot flash boot boot.img/recovery recovery.img But I again stuck into a bootloop. Repaired again... I thought flashing a custom recovery breaks the phone, so I decided to just boot the recovery and install supersu. but again a bootloop in the end.
Is your bootloader already unlocked?
Gewiz said:
Is your bootloader already unlocked?
Click to expand...
Click to collapse
yes sir, already.
flash complete stock, no modifications.
confirm if it loads to usermode
NeoBeum said:
flash complete stock, no modifications.
confirm if it loads to usermode
Click to expand...
Click to collapse
I have flashed the lastest stock ftf by flashtool, that is what I do after everytime I brick it while trying to obtain root. And if you mean switching to another user, yes it does.
that's good. it means hardware is fine.
it's your root method.
try this
https://forum.xda-developers.com/showthread.php?t=3609358