Welcome to the Unofficial Boeffla Kernel Profile Sharing Thread for OnePlus 2
Introduction
I've been inspired by the Profile Sharing threads from the S3,S5 and ONE.So I decided to create a thread in the general section for OnePlus 2.
Links
Original Boeffla Kernel Thread
[KERNEL] [OnePlus2] [OOS 2.x.x] Boeffla-Kernel
Official Boeffla Website
http://www.boeffla-kernel.de/
Boeffla Config App
Boeffla Config
INDEX
1.Profiles->[Post #2]
2.[HOWTO] Make and Activate a Profile->[Post #3]
Credits
1.@Lord Boeffla for his amazing work on the OnePlus 2.
2. @ZaneZam for his UNOFFICIAL Builds.
NB:Most of the profiles listed here would require the Boeffla Donate app to work effectively as Governor Tunables and some additional features are only available in the donate version of Boeffla Config.You can find all information about donation HERE.
PROFILES
Everyday Usage Profiles-(Video Playback ,Browsing , Reading , Light gaming)
@v7's Optimized_Beta1-Click Here
@The Peterle's Impulse_Tuned 3.0-Click Here
@Stylo King's ElementalX V1-Click Here
@milestone2mod's PowerSave Interactive -Click Here
@Naman Bhalla's TotalRevamp_Version1-Click Here
@steroideg's Interactive_Everyday-Click Here
@chetan_p's Everyday Profile-Click Here
@mido25's Everyday_Profile-Click Here
@Stylo King's ElementalX V2-Click Here
@PeterImmel's zzImmelP-Click Here
@umair9001's Optimum_Testv1-Click Here
Battery Saving Profiles-(For those who prefer battery saving over performance)
@Naman Bhalla's Impulse_BatteryExtreme_Beta1.1_Beta1-Click Here
@The Peterle's Impulse_Tuned_v2.1-Click Here
@hunter bruhh's ZZMOOVE YBATEXT-Click Here
Gaming Profiles-(For a smooth gaming performance over battery life)
@mido25's Gaming Profile-Click Here
[HOWTO] Make and Activate a Profile
Making a Profile File
1.Open Boeffla Config V2 app.
2.Go to "Profile Maintenance".
3.Tap and Hold on a Profile.
4.Choose "Export to File" option.
5.Find the exported profile in "/storage/emulated/0/boeffla-kernel-data" folder.
Activating a Profile File
1.Download "xxx.bcprofile" file.
2.Copy it into "/storage/emulated/0/boeffla-kernel-data" folder;
3.Open Boeffla Config V2 app.
4.Go to "Profile maintenance"
5.Choose "Load Foreign" option if you don't need custom CPU voltages and LKM settings to be loaded or choose "Load" option if you would like all profile settings to be loaded.
6.Choose the downloaded profile.
7.Activate it in the list by tapping on it .
v7's Profile Garage
v7 said:
1.V7_Optimized_B1 Everyday Profile
Initial Release
*Tuned Interactive Governor
*Smooth
*Optimized for Battery Savings
Download:V7_Optimized_B1
NB:Unzip the downloaded file to find the profile.
Click to expand...
Click to collapse
2.V7_Ondemand_V1
ChangeLog->>
*Tuned Ondemand Governor
*Zero Lags
*Tweaked Touch Boost
Download:V7_Ondemand_V1
NB:Unzip the downloaded file to find the profile.
Click to expand...
Click to collapse
reserved*
nice!.
V7_Optimized_B1 Everyday Profile
Initial Release
*Tuned Interactive Governor
*Smooth
*Optimized for Battery Savings
Download:V7_Optimized_B1
NB:Unzip the downloaded file to find the profile.
Thank you for this!!!
Downloaded and applied, I will update tomorrow ?
I think 2016 will be there best year for our Beast One Plus Two:thumbup:
First of all thank you @v7 for this thread and your profile.
I want to share my impulse profile with a tuned impulse governor.
Impulse is based on interactive governor with the aim of battery savings. I combined it with the interactive performance tuneables and an increased cpu load. So it is more performance orientated and has also battery savings options while screen off.
To addition to this I have my thermal config performance in it to make it smooth.
Now it is a nice all day profile with balance of performance and battery savings.
Enjoy it.
UPDATE! IMPULSE TUNED 3.0
http://forum.xda-developers.com/showthread.php?p=67178705
Regards Peterle
PS: The gpu settings of 27mhz could be sometimes laggy. Then it's recommend to switch to default gpu settings.
Giving it a go now
@7 love youre Setup!! Perfect ?
v7 said:
V7_Optimized_B1 Everyday Profile
Initial Release
*Tuned Interactive Governor
*Smooth
*Optimized for Battery Savings
NB:Unzip the downloaded file to find the profile.
Click to expand...
Click to collapse
Is it for the stable or beta version of Boeffla-Kernel?
xarisCY said:
Is it for the stable or beta version of Boeffla-Kernel?
Click to expand...
Click to collapse
I use it on the latest test kernel: v1.1 beta 1.
It works for me. Don't know obout the stable version though
mipirakas said:
I use it on the latest test kernel: v1.1 beta 1.
It works for me. Don't know obout the stable version though
Click to expand...
Click to collapse
I'm using it with the stable version and works well, but I also want to know for what version is intended this profile
mc1984 said:
I'm using it with the stable version and works well, but I also want to know for what version is intended this profile
Click to expand...
Click to collapse
I think it doesn't really matter. He doesn't use a feature that is only in the beta kernel i think.
Testing....
Inviato dal mio ONE A2003 utilizzando Tapatalk
xarisCY said:
Is it for the stable or beta version of Boeffla-Kernel?
Click to expand...
Click to collapse
mc1984 said:
I'm using it with the stable version and works well, but I also want to know for what version is intended this profile
Click to expand...
Click to collapse
I haven't used any beta features.So it should work with both stable and beta Kernels
___
v7
XDA Assist
The Peterle said:
First of all thank you @v7 for this thread and your profile.
I want to share my impulse profile with a tuned impulse governor.
Impulse is based on interactive governor with the aim of battery savings. I combined it with the interactive performance tuneables and an increased cpu load. So it is more performance orientated and has also battery savings options while screen off.
To addition to this I have my thermal config performance in it to make it smooth.
Now it is a nice all day profile with balance of performance and battery savings.
Enjoy it.
Regards Peterle
PS: The gpu settings of 27mhz could be sometimes laggy. Then it's recommend to switch to default gpu settings.
Click to expand...
Click to collapse
Thanks a lot for sharing bud
Added to OP :highfive:
___
v7
XDA Assist
Related
Amplitude Kernel for Nexus 6
WHY???!!!... WHY??!!! ... zparallax, we don't need another kernel for the Nexus 6!! ... Just let me say...the more the merrier!, I know we have greeeeeeeeeeeeaaaaaaaaattt kernels out there (Despair, Elite, Benzo, etc.) but don't blame on me
I am not responsible for any damage to your phone, if your house explodes because of you shamu, if you can toast your breaksfast on it, etc, etc.. Read before downloading or posting in the thread: Proceed with caution if you have no experience. Remember that I'm just the guy who does kernels for fun! :laugh:
DOWNLOAD THE LATEST VERSION HERE (Thanks to androidfilehost.com)
The very last zip file
[INSTALL STEP-BY-STEP]
Copy the ZIP in your SDCARD
Reboot into TWRP recovery
Flash the kernel
Wipe Dalvik & Cache
Enjoy!
Contributors
zparallax
All the fellows, guys or girls who develop stuff for fun and share with all us (faux123, savoca, mgr666, stratosk, franciscofranco, myfluxi, etc.)
Google
And any other developer that have contributed to the AOSP project or to the development of governors, scheduler or any other developer not mentioned (if you want me to include your credits I will)
[THANKS] to all devs on XDA and the great XDA team
Source Code:
- Github
Kernel Features:
- Based on Linux kernel version 3.10.84+
- Built with Uber Toolchain 6
- Alucard Hotplug (by alucard), Dynamic Hotplug (by stratosk), Intelliplug (by faux123), Autosmp (by mgr666)
- MP Decision disabled
- GOVs: OnDemand, Interactive, Userspace, Powersave, Performance, Conservative, Nightmare, Smartmax, Hyper, Adaptive, Wheatley, Pegasusq, Intelliactive, Lulzactive, Abyssplugv2, ZZMoove, Lionheart, Yankactive
- IO SCHEDs: NOOP, Deadline, ROW, CFQ, etc.
- TCP Congestion: Westwood, Reno, Bic, Cubic, Highspeed, etc.
- Gamma Control (by savoca)
- UKSM
- Fastcharge (by faux123)
- Powersuspend (by faux123)
- UKM by apb_axel (Install Synapse if you wish :good
- More to come
Created 2015-07-25
Last Updated 2015-08-16
XDA:DevDB Information
[kernel]Amplitude Kernel, Kernel for the Nexus 6
Contributors
zparallax
Version Information
Status: Alpha
Current Alpha Version: 1.2
XDA:DevDB Information
[Kernel] Amplitude for Shamu, Kernel for the Nexus 6
Contributors
zparallax, zparallax, faux123,savoca,stratosk,mgr666
Source Code: https://github.com/zparallax/amplitude_shamu
Kernel Special Features: Custom kernel, multiple governors, hotplugs, anykernel, etc.
Version Information
Status: Alpha
Current Stable Version: 1
Stable Release Date: 2015-07-25
Created 2015-07-25
Last Updated 2015-08-16
For changelog!!
v 1.2:
- Reworked from scratch
- Rebased to 3.10.85
- Some other tweaks (Test by yourself and tell me)
v 1.1:
- Added Wake gestures (by flar2)
- Added faux sound (for now, thanks faux123)
- Fixed some problems reported by the users
Amplitude sounds amazing! Great work zparallax!!!
Sweet! Glad to see more kernels available!
Sent from my Nexus 6
Awesome work. As you say... The more the merrier
Sent from my Nexus 6 using Tapatalk
Fit for M2?
Sent from my Nexus 6 using Tapatalk
Not yet buddy, initial release today and working on m2.
Thanks for your interest
Your op is hilarious. Toast breakfast on my Shamu. Haha! That's awesome! Look forward to M2 build. I'm an Elite user now and love it but always down to try a new kernel. Tks!
Thanks for this new kernel just using on my nexus6 can provide best setting for performance in terms of speed or use with default setting ,please guide its my request .
Looks like a good kernel, thanks. Did you plan fauxsound in the future? It's for me a must have. Cheers
RP74698 said:
Thanks for this new kernel just using on my nexus6 can provide best setting for performance in terms of speed or use with default setting ,please guide its my request .
Click to expand...
Click to collapse
Tylog said:
Looks like a good kernel, thanks. Did you plan fauxsound in the future? It's for me a must have. Cheers
Click to expand...
Click to collapse
@RP74698: for daily use... Intelliplug or Alucard and yankactive... UKSM active... For battery auto_SMP or dyn_hotplug and zzmoove. For balance... Any other gov. GPU msm_adreno since it has the adreno idler by arter
@Tylog: I'm planning to add a sound control maybe faux's maybe not you'll see
Thanks to everyone for your comments!
What is UKSM active and how use this Sir
That's good Faux or whatever, only V4a is not enough for me, I need my music loud thanks.
Linux kernel has a feature named KSM(Kernel SamePage Merging). it lets the hypervisor system share identical memory pages amongst different processes or virtualized guests. However, it has its limitation such like high CPU usage and slow responses to workload change. So here comes UKSM. With a revolutionary algorithm redesign, UKSM has many advanced features:
Full system scan.*It automatically scans all user processes’ anonymous VMAs. Before UKSM, a process need to call KSM kernel API to submit its memory areas to KSM for scan. This makes many legacy software other than KVM can NOT benefit from KSM. Now, UKSM scans whole system applications including KVM. All programs benefit from UKSM without even knowing how it works.
Super quiet CPU usage.*It automatically detects rich areas containing abundant duplicated pages. Rich areas are given a full scan speed. Poor areas are sampled at a reasonable speed with very low CPU consumption usually under 1%. Our benchmarks show that even for CPU intensive workloads, it has a negligible performance impact. Ultra scan speed and CPU efficiency.*A new hash algorithm is proposed. More on this...UKSM info
Thanks!!
Where is allocated UKSM in your kernel and how activate this as I'm using kernel auditor app not seeing anywhere ,only seeing KSM and this is active by default .
RP74698 said:
Where is allocated UKSM in your kernel and how activate this as I'm using kernel auditor app not seeing anywhere ,only seeing KSM and this is active by default .
Click to expand...
Click to collapse
Hi my friend.. This is UKSM on Kernel Aduitor (Kernel Same Page Merging), is active by default. Since it saves CPU cycles when merging files and making changes it will save battery and increase overall system performance. No need to activate it.
Thanks for your testing!
Thanks Sir
---------- Post added at 05:52 PM ---------- Previous post was at 05:28 PM ----------
Dear Sir ,please one more thing when trying to active Alucard only hot plug with yank active CPU governed ,Intelliplug automatic on while I have switched off .
Dear Sir ,seems Intelliplug is active by default as guided earlier for daily use I'm trying to use yank active alacurd and ukm active controlling through synapse but inytelli automatically active ,while I have activated only Alacurd please see
RP74698 said:
Dear Sir ,seems Intelliplug is active by default as guided earlier for daily use I'm trying to use yank active alacurd and ukm active controlling through synapse but inytelli automatically active ,while I have activated only Alacurd please see
Click to expand...
Click to collapse
Hi my friend!... Will look into this. Thanks for testing!
Best!
Great kernel got a antutu score of 51715
Great job bro looking forward for some more features like faux sound, wake gestures in your future release's
THIS THREAD IS MOST LIKELY DEAD SINCE I MOVED IT INTO THE MAIN LG G3 DEVELOPMENT PAGE!!
NEW LINK http://forum.xda-developers.com/lg-g3/development/kernel-settings-nebulakernel-rev10-2-1-t3258520
USE AT YOUR OWN RISK!! MIGHT NOT WORK FOR ALL G3!!
MAKE BACKUP OF YOUR DEVICE BEFORE USING THESE FILES!!!
Please Do not change or mod these settings or re-release them! If you do i will hunt you down and murder your favorite pet and turn them into a nice steak or i'll just have to hunt you down and ding dong ditch your house > [That was a joke......]
This thread is for setting i made for the LG G3 Verizon Wireless (vs985)
These settings are to be used with SetCPU and Trickster Mod (You'll need Trickster Mod donate pack to restore the Trickster Mod backup settings)
These settings .zip are not flashable. You will need to unzip the pack ON DEVICE.
PACK includes:
SetCPU profiles:
Multimedia - Other, Multimedia - Photos, Multimedia - Music, Multimedia - Video, Multimedia - Camera, Emulator- MyBoy!, Social, Google Chrome, GPS Navigation and Maps [ACTIVE], Phone/Contacts, HIGH TEMP!! 170+oF+!!, Games (HD-Large), Games (HD-Small), Charging (AC/USB), Screen Off, Everyday Use. Those are the profiles in the SetCPU pack. They are still being tweaked! Every Profile is different and might have different governors and I/O Schedulers
Trickster Mod Setting: EXTREME Undervolting, On_demand Governor tweaking, minfree_Control (RAM Management), 1512 i/o fiops BOST SDCARD AND INTERNAL STORAGE,Sound controls and some other awesome things! They are still being tweaked!
Install directions for these files:
1. Download the .zip file from this page
2. Unzip pack
3. Put the LG G3 CM12.x NebulaKernel 10.3-T2 [1.0] [3.03GHz].setcpu.json in the root of your onboard SD card partition. SetCPU will find the files on its own when you go and restore it
4. Put the LG G3 (vs985) CM12.1 NebulaKernel 10.3-T2 3.03GHz [11-21-2015] file in the tm_profiles folder in the onboard SD card partition.
Then go into Trickster Mod and touch restore and select the latest version of the files
5. Change your DPI to 350 because it will make the 1440p display look beautiful and perfect and like it should look! For some reason i cant get the system to change the resolution to 1080p anymore. I guess something in CM12.1 messed that up but what ever!
6. ENJOY THESE FILES and you're instantly AWESOME LG G3!
I do not take ANY credit AT ALL for the making of the kernel! I did not build the KERNEL! All credit goes to @Eliminater74 !
These settings ONLY work on the NebulaKernel 10.3-T2l! If you use the Trickster Mod Settings on any other kernel the device will crash and boot loop These settings have only been tested on The Verizon LG G3 model. I do not know if they work on any other model because i do not own them
DOWNLOAD THIS BADASS KERNEL FROM THIS BADASS DEV!
Kernel link: http://forum.xda-developers.com/lg-g3/development/kernel-nebulakernel-rev6-5-build20150715-t3161768
GeekBench scores!
1. Single-Core: 1010 | Multi-Core: 3177
2. Single-Core: 1080 | Multi-Core: 3255
3. Single-Core: 1060 | Multi-Core: 3300
4. Single-Core: 1070 | Multi-Core: 2433
DO NOT DOWNLOAD AND USE [V1.0 STABLE-RELEASE] IT IS NOT STABLE OR USABLE FOR DAILY USE! USE THE NEWEST VERSION AVAILABLE
CHANGELOG
11-21-2015: [V1.0 STABLE-RELEASE]
1. Release of Pack! YAY!!!
2. I had to make some voltage changed to the 3.03GHz step for it to be stable for me! I have to raise the voltage up from 1225 to 1228. So far it's been very stable! Everything is undervolted beautifully!
3. Most of the Governor settings and SetCPU profiles are ported from the Jedi Kernel settings pack but with minor changes like adding per profile I/O Schedulers
11-22-2015: [V1.1 STABLE]
1. SetCPU: I changed Everyday Use MAX cpu freq from 3GHz down to 2.88GHz because 3GHz isn't stable yet. I'm still working on the voltage for it.
2. Trickster Mod: Tweaked voltages to make the device more stable. They aren't perfect yet!
3. Trickster Mod: Tweaking the OnDemand governor for get the highest performance from the 801 CPU.
4. Trickster Mod: Changed GPU governor from Simple-ondemand to msm-adreno-tz because i seem to get better performance with that!
5. If anyone can tell me how to export/backup Kernel Adiutor settings that would be awesome!
11-23-2015: [V1.2 STABLE]
1. SetCPU: Changed Max freq on charging AC/USB from the lower 2.4 to the higher 2.4GHz
2. SetCPU: Changed Max freq on Camera profile to 2419 and changed the governor to ondemand. For better 4K recording.
3. SetCPU: Changed Max Freq on Multimedia-Other to 1574
4. SetCPU: Multimedia-Music Max freq from 1958 to 2265
5. SetCPU: Multimedia-Video Max Freq from 1728 to 1958
6. SetCPU: Google Chrome Max freq from 1958 to 2268 (this profile only supports Chrome Beta)
7. SetCPU: Phone, Contacts Max freq from 806 down to 729 (Trying to see if i can get lower temps in phone calls)
8. Trickster Mod: Changed GPU freq from 657MHz up to 700MHz (This might not work for all! It works PERFECTLY for me!)
9. Trickster Mod: Not sure if this in the today's build but i made some sound settings changes! You might want to change them to your liking!)
10. Trickster Mod: Tweaked some voltages! Trying to have them as low as possible but keeping full stability!
11. These updates will most likely be uploaded everyday!
11-26-2015: [V1.3 STABLE]
1. Trickster Mod: I Tweaked the voltages! I haven't had any crashes unless i try to lower the voltages! So i might have found the perfect voltages for this phone!
2. Trickster Mod: I changed the hotplug from MPDecision to MSM MPDecision because i am getting better proformance with that hotplug. I put a picture of the settings i used in the newest post! Please see them to change your settings in Kernel Adiutor.
3. Trickster Mod: You will need to change the CPU governor Settings manually to the tweaked ones. Change them to 0.2. If you see BS Logic.....Well it speaks for itself! DONT USE IT! IT'S GARBAGE!
4. Trickster Mod: I tweaked the GPU settings See newest post for what to change them to in Kernel Adiutor.
5. SetCPU: I added a low Battery profile today! It will enable when your battery drops before 19% because Android tells you that your battery is low at 15% it's to catch it before it Starts its BS lol
6. SetCPU: I reorganized the profiles! I put screen off on the top of everything else so when you are playing music you can the Screen Off profile enables to save battery life and so on.
7. SetCPU: I also tweaked some profiles but i forget what i did or to what. I've been busy lately so i forgot.
8. I changed my DPI from 330 to 350 and i've been getting WAY better proformance! So that's awesome
9. I got 3 1/2 hours of SOT.
10. I also changed my kernel from the testing version to the more stable version but these settings work on both. You will need to use the stable kernel that supports the 3GHz CPU OC and the 700MHz GPU OC for them to work!
11. Also happy thanksgiving to my fellow Americans and belated happy thanksgiving to my Canadian friends which i have very little about you friends in either! -______-
12. I changed the names to some of the files and the .zip pack
Please report back after updating!
If you encounter any device crashing please tell me
Thanks
new update!
new update!
new update! Happy Thanksgiving!
This is a thread post that goes alongside with the newest version V1.3 STABLE from 11-26-2015.
These are things that you have to set manually yourself!
In the first picture of the Hotplug settings please make sure the minimum cores online is set to one! That was a mistake i made before taking the screenshot! I was scrolling and must have dragged it to 4 somehow
Woooow thanks hermano
mataflakitas said:
Woooow thanks hermano
Click to expand...
Click to collapse
For what?
For thread ...
mataflakitas said:
For thread ...
Click to expand...
Click to collapse
Thanks! I work hard on this stuff to help people get the most out of their devices using awesome kernels!
MaddMaxx636 said:
THIS THREAD IS MOST LIKELY DEAD SINCE I MOVED IT INTO THE MAIN LG G3 DEVELOPMENT PAGE!!
NEW LINK http://forum.xda-developers.com/lg-g3/development/kernel-settings-nebulakernel-rev10-2-1-t3258520
Click to expand...
Click to collapse
As this is what the OP has stated, there's no need to keep both open.
Please use the thread linked above for any further conversation.
Thread closed.
Welcome to AK Kernel Synapse Profiles HUB, Feel free to share your configs and profiles here.
AK Kernel Official Thread - Click Here
AK Kernel Official Website - Click Here
Big Thanks to @ak for all the hard work he has done for the AK KERNEL.
Instructions for How to Backup and Restore a profile in Synapse Click Here
@mamba720027's Profile Workshop Click Here
@Stylo King's ElementalX V2 Click Here
@Stylo King's Battery-EAS V1 Click Here
Instructions for How to Backup and Restore profiles in Synapse.
PS- Make sure you have set SeLinux to Permissive.
If you want to Backup a profile -
1. Input profile name (Should not have any special characters) and press enter
2. Press check mark at the top
3. Press backup current profile.
4. If the backup was successful you'll get a toast saying so
If you want to See the profile -
1. Press restart synapse and wait till it starts by itself
If you want to Restore a profile -
1. Place profile .tgz file in synapse profiles folder
2. Press restart synapse
3. Go into profile section and select profile you want (can't have any special characters) press the check at the top.
4. Press apply profile
5. Open synapse again and hit the "X" at the top and wait for settings to apply
6. Close synapse and open it again and press the X again
7. Repeat step 7 until the "X" no longer appears
If you want to Apply the profile on boot -
1. Go into settings and check apply on boot
2. Do not reboot for at least 2 minutes or the settings will get reset.
3. If you don't want to wait 2 minutes then uncheck stability check (you may get stuck in a boot loop if your settings make your phone SOD or RR)
NOTE : If a profile doesn't setup correctly, Clear synapse data.. Reboot if necessary.
Note 2 : For best results, Reboot and charge till 100% after applying a profile.
Reserved
///////////////////////////////////////////////////////////////
ROM - Pure Nexus
Kernel - AK Kernel
Mods - None
///////////////////////////////////////////////////////////////
interactive bat V5
Updated+ 3/29/16
//Settings//
:::A53:::
- CPU Min/Max 302/1708mhz
:::A57:::
- CPU Min/Max 633/2054mhz
- Interactive Governor
- 4+4 Cores Online
- Hot-plugging (MSM Performance Driver)
- GPU Min/Max 180/600mhz
- GPU Gov msm-adreno
- Memory Tweaks
- LMK Adjustment Preset
- Noop Scheduler
- Sound High Performance Speaker Boost +23
- Custom Gamma Profile
Click to expand...
Click to collapse
++Main New Adjustments++
- A53+A57 Interactive governor adjustments
- I/O Adjustments
- Memory Adjustments
- mamba_feat_hackachive v2 Gamma Profile (updated)
: Stock Gamma (KCAL 256,256,256 Hue 0, All other values 255)
Utilizing max available CPU speeds with mainly CPU governor adjustments to bias good battery performance with all the best AK kernel features available.
interactive bat V5
********************
ENexus Conservative V3
Updated+ 2/29/16
This profile is more of a battery saving setup that may lack certain performance in areas to meet a more battery saving need. A profile for those not always next to their chargers.
//Settings//
:::A53:::
- CPU Min/Max 460/1555mhz
:::A57:::
- CPU Min/Max 302/2054mhz
- Impulse Governor
- 2:2 Cores Online
- Hot-plugging (MSM Performance Driver)
- GPU Min/Max 180/450mhz
- GPU Gov msm-adreno
- Memory Tweaks
- LMK Adjustment Custom
- tripndroid Scheduler
- Sound High Performance Speaker Boost +23
- Custom Gamma Profile
Click to expand...
Click to collapse
++Main New Adjustments++
- New Impulse Gov adjustments/better speeds and power consumption
- Hot-plugging 2+2 cores on clusters reduce power consumption
- tripndroid Scheduler
- Misc general adjustments New
- mamba_feat_hackachive Gamma Profile (updated)
: Stock Gamma (KCAL 256,256,256 Hue 0, All other values 255)
Update reworks the impulse governor adjustments to achieve better speeds selection for workload & using less cores than previous versions to meet a lower power consumption and maintaining a stable and everyday user setup.
ENexus Conservative V3
************************************
Pure Flow V2
Updated+ 3/4/16
Not a lot has change or needed adjustment in V2 Update. Mostly changes in the memory section. Just a smooth performance profile.
//Settings//
:::A53:::
- CPU Min/Max 460/1708mhz
:::A57:::
- CPU Min/Max 480/2054mhz
- Ondemand Governor
- 4:4 Cores Online
- Hot-plugging (MSM Performance Driver)
- GPU Min/Max 180/600mhz
- GPU Gov simple_ondemand
- LMK Adjustment Stock
- SIOPlus Scheduler
- Sound High Performance Speaker Boost +25
- Custom Gamma Profile
Click to expand...
Click to collapse
++Main New Adjustments++
- Ondemand Gov adjustments moderate
- Hot-plugging workload adjustments
- SIOPlus Scheduler tweaked
- Misc adjustments/Memory
- mamba_feat_hackachive Gamma Profile (updated)
: Stock Gamma (KCAL 256,256,256 Hue 0, All other values 255)
Pure Flow V2
********************************************
Elemental HybridX
Updated+ 2/5/16
This profile is a mix of ElementalX+Impulse governor. Impulse works in a more performance manner on big cluster while ElementalX is more balance on smaller cluster. Everything is carefully adjusted to create a very fluid UI experience down to performance workload speed times. Power is not wasted on small tasks. This is just something I was testing some ideas out on.
//Settings//
:::A53:::
ElementalX Governor
- CPU Min/Max 460/1248mhz
:::A57:::
Impulse Governor
- CPU Min/Max 302/2054mhz
- 4:4 Cores Online
- Hot-plugging (MSM Performance Driver)
- GPU Min/Max 180/600mhz
- GPU Gov simple_ondemand
- LMK Adjustment Stock
- SIOPlus Scheduler
- Sound High Performance Speaker Boost +22
- Custom Gamma Profile
Click to expand...
Click to collapse
++Main New Adjustments++
- Gov adjustments moderate
- Hot-plugging workload adjustments
- SIOPlus Scheduler tweaked
- Misc adjustments/Memory
- mamba_feat_hackarchive Gamma Profile
: Stock Gamma (KCAL 256,256,256 Hue 0, All other values 255)
Click to expand...
Click to collapse
Elemental HybridX
*******************************************************
EAS Balance V3
Updated+ 4/16/16
[Profile For EAS-AK Kernel]
Using interactive governor instead of sched on EAS kernel in order to achieve better performance & battery.
//Settings//
:::A53:::
- CPU Min/Max 460/1708mhz
:::A57:::
- CPU Min/Max 633/2016mhz
- 4+4 Cores Online
- Hot-plugging (MSM Performance Driver)
- GPU Min/Max 180/600mhz
- GPU Gov msm-adreno
- Memory Tweaks
- LMK Adjustment Preset
- fiops Scheduler
- Sound High Performance Mode +23 Speaker
- Custom Gamma Profile
Click to expand...
Click to collapse
++Main New Adjustments++
- New Interactive gov adjustments for EAS
- Hot-plugging workload adjustment
- fiops Scheduler tweaks
- LMK Preset
- hackarchive Latest Gamma adjustments
::: - Stock Gamma (KCAL 256,256,256 Hue 0, All other values 255) :
:Thanks to @hackarchive for sharing these gamma adjustments to make our superamoled displays look even more awesome :::
EAS Balance V3
Thanks @ak for a great kernel & all his work.
Thanks @Stylo King for maintaining this thread.
Thanks @hackarchive for the gamma adjustments.
Thank you guys!
Sweet!
mamba720027 said:
@styloking
Here's just the link to profile for now. Will use this spot as a base as usual so it will update later
Interactive bat v2 profile
https://www.dropbox.com/sh/vjs48hxifjmwokf/AAAXl4bxwSKUvaJFQC2lV95sa?dl=0
Click to expand...
Click to collapse
Thank you mamba! I'm getting better battery life than your v1. I have a problem with my notification LED and sound cutting out when they come in. Any tweak I could do to help?
DJMartini said:
Thank you mamba! I'm getting better battery life than your v1. I have a problem with my notification LED and sound cutting out when they come in. Any tweak I could do to help?
Click to expand...
Click to collapse
Great!! :thumbup:
Haven't done stuff with the notification LED.
Only sound adjustment in Synapse/Sound "HPM" enable +23 to speaker boost. You could set that back to default -20 and see if its the reason and disable "HPM" see what happens.
Other than that if you use any audio mods you may want to disable to see if that's the cause of interference.
mamba720027 said:
@styloking
Here's just the link to profile for now. Will use this spot as a base as usual so it will update later
Interactive bat v2 profile
https://www.dropbox.com/sh/vjs48hxifjmwokf/AAAXl4bxwSKUvaJFQC2lV95sa?dl=0
Click to expand...
Click to collapse
No, I won't add it to OP until you quote me right :silly:
Stylo King said:
No, I won't add it to OP until you quote me right :silly:
Click to expand...
Click to collapse
lol, I always mix that quote thinge up
mamba720027 said:
lol, I always mix that quote thinge up
Click to expand...
Click to collapse
BTW your timing was perfect, 4th post from the OP is your Profiles workshop.. Swag
Stylo King said:
BTW your timing was perfect, 4th post from the OP is your Profiles workshop.. Swag
Click to expand...
Click to collapse
yea, I was lucky. Will work right in their nicely with the OP
Glad you got your 6P, now for some Stylo King magic. What color you got and capacity?
I got the Aluminum 64GB with CASEFORMERS ultra slim armor case below. Everyone I met like it.
mamba720027 said:
yea, I was lucky. Will work right in their nicely with the OP
Glad you got your 6P, now for some Stylo King magic. What color you got and capacity?
I got the Aluminum 64GB with CASEFORMERS ultra slim armor case below. Everyone I met like it.
Click to expand...
Click to collapse
Aluminium 64 Gigs Naked..I don't like cases
Stylo King said:
Aluminium 64 Gigs Naked..I don't like cases
Click to expand...
Click to collapse
Same here,first time I using a case :thumbup:
Op main thread updated, thanks a lot guys:
[ AK KERNEL NEXUS 6P PROFILES THREAD ]
This thread is for people to post their profiles with each other: Link
Thanks a lot
@Stylo King
@mamba720027
Manage this while optimising IO workloads, ROW adjustments & Memory
mamba720027 said:
Manage this while optimising IO workloads, ROW adjustments & Memory
Click to expand...
Click to collapse
Still tweaking that set up? ?
zandander said:
Still tweaking that set up? ?
Click to expand...
Click to collapse
I am, lol. Its even more snappy now and load times improved. This what IO looks like now
Jesus! That's reminiscent of AK kernel on the gnex. His kernel had the highest IO of any kernel back in the day. I'm excited for this one
zandander said:
Jesus! That's reminiscent of AK kernel on the gnex. His kernel had the highest IO of any kernel back in the day. I'm excited for this one
Click to expand...
Click to collapse
I'm excited myself @ achieving more improvement upon what I taught was most we could hit with IO but apparently I was wrong plus as I go along spending more time in that department I learn more stuff
Welcome to: The One Bad Ass ROM
Hello everyone, I would like to present OBAR (One Bad Ass ROM) a ROM that I successfully built for the Note 4 is now on our LG, well for Sprint at-least. So here it is, a Stock, de-bloated, modified ROM that is based off of ZV6 to bring the absolute best performance and battery life to your phone! Hope you guys enjoy! EDIT (5/02): As of now we have our very own OBAR Kernel,
I'd like to let you know all about it so seek the second post
Stock Specifications:
Based On Stock LS997ZV6 (Nougat - 7.0.1)
Our Very Own OBAR Kernel! (See second post for details)
Rooted & Busy Boxed
De-Bloated
Magisk or SuperSU Compatible (SuperSU built in)
No Sprint Bloat
OBAR Features:
Enabled High Independence Mode
Enabled Guest Features (Max: 5)
Enabled Hotspot
Added Build.Prop Tweaks
Added Custom Kernel Adiutor
Fixed Data On Boot
Improved Net Speeds
Improved Scrolling Speeds
Improved RAM Management
Insane Battery Life
Insane init.qcom.post_boot Modifications (Improves Overall Performance/Battery/Stability)
And more I forgot...
Install:
Download
Transfer To Phone
Reboot To Recovery
Wipe System, Data, Cache, Dalvik Cache (x3)
Format System (Backup Your Internal Storage First)
Install Stock OBAR Rom
Wait About 15 min To Boot
Enjoy
Downloads:
Rom Releases
Kernel Releases
Older Versions
After Install: (Recommended)
Initial boot will boot twice.
Please allow about 15 minutes to boot up after initial boot. (Due to it being deodexed)
Recommended to wait up to five minutes on initial boot before doing anything, then do a full restart.
To get back Developer Options go in to Settings, About Phone and rapidly tap Build Number until it says your a developer.
Important Notes:
Yes there is static on boot.
For those who get stuck in a "TWRP LOOP" see here.
Don't ask if this will work on other variants I will ignore your question. I will not support other variants with this ROM, sorry. Sprint only. You can always flash it and find out.
Credits:
@me2151 - For the Official LS997ZV6 Base and root method of course!
@svadev - For the SVA Deodexing tool!
@Ticklefish - For the TickleMyAndroid Tool!
@DTDMike - For the ability to enable High Independence Mode.
@ashirviskas - For enabling the dual speaker mod.
@warBeard_actual - For the crazy init.qcom.post_boot Modifications
@Team DevDigitel - For a working base and great help!
@freeza - For teaching me how to build my first kernel!
@BackCheck - Major help with figuring out how to get the kernel to fully work properly!
Disclaimer: I do not and will not take any responsibility towards anything that happens to your phone after flashing.
XDA:DevDB Information
Stock LS997, ROM for the LG V20
Contributors
SaintZ93, me1212
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: LS997
Based On: Stock
Version Information
Status: Stable
Current Stable Version: Release 1
Stable Release Date: 2017-03-26
Created 2017-02-09
Last Updated 2017-03-26
Okay guys OBAR now contains its own kernel! So I want to give you a bit of information that may help you to decide how you want to set up it up! I will always keep this post updated with all the latest version release information. Will label dates next to each new update to show what is new!
I/O Scheduler Information - GPU:
FIOPS - This is an IOPS based I/O scheduler. It will try to distribute IOPS equally among all processes in the system. It's mainly for Flash based storage.
SIO - The Simple I/O scheduler is an extremely simple scheduler, based on noop and deadline, that relies on deadlines to ensure fairness. The algorithm does not do any sorting but basic merging, trying to keep a minimum overhead. It is aimed mainly for aleatory access devices (eg: flash devices).
NOOP - The no-op I/O scheduler is a minimal scheduler that does basic merging and sorting. Its main uses include non-disk based block devices like memory devices, and specialised software or hardware environments that do their own scheduling and require only minimal assistance from the kernel.
DEADLINE - The deadline I/O scheduler is simple and compact. It will provide CSCAN service with FIFO expiration of requests, switching to a new point in the service tree and doing a batch of IO from there in case of expiry.
CFQ - The CFQ I/O scheduler tries to distribute bandwidth equally among all processes in the system. It should provide a fair and low latency working environment, suitable for both desktop and server systems.
BFQ - The BFQ I/O scheduler tries to distribute bandwidth among all processes according to their weights. It aims at distributing the bandwidth as desired, independently of the disk parameters and with any workload. It also tries to guarantee low latency to interactive and soft real-time applications. If compiled built-in (saying Y here), BFQ can be configured to support hierarchical scheduling.
BFQIO - Enable hierarchical scheduling in BFQ, using the cgroups filesystem interface. The name of the subsystem will be bfqio.
ZEN - FCFS, dispatches are back-inserted, deadlines ensure fairness. Should work best with devices where there is no travel delay.
Governor Information - CPU:
Simple Ondemand - Chooses frequency based on the recent load on the device. Works similar as ONDEMAND governor of CPUFREQ does. A device with Simple-Ondemand should be able to provide busy/total counter values that imply the usage rate. A device may provide tuned values to the governor with data field at devfreq_add_device().
Performance - Sets the frequency at the maximum available frequency. This governor always returns UINT_MAX as frequency so that the DEVFREQ framework returns the highest frequency available at any time.
Powersave - Sets the frequency at the minimum available frequency. This governor always returns 0 as frequency so that the DEVFREQ framework returns the lowest frequency available at any time.
Userspace - Sets the frequency at the user specified one. This governor returns the user configured frequency if there has been an input to /sys/devices/.../power/devfreq_set_freq. Otherwise, the governor does not change the frequnecy given at the initialization.
Blu_active - This allows you to get a full dynamic cpu frequency capable system by simply loading your cpufreq low-level hardware driver, using the 'interactive' governor for latency-sensitive workloads.
Nightmare (NEW 5/15) - This is a PegasusQ modified, less aggressive and more stable. A good compromise between performance and battery. In addition to the SoD is a prevention because it usually does not hotplug.
Darkness (NEW 5/15) - It's based on nightmare but more simple and fast, basic configs but very complex structure. It is an updated nightmare gov and improved stability, so far it is quite stable in tests.
Chill (NEW 5/15) - Use the CPUFreq governor 'chill' as default. This allows you to get a full dynamic frequency capable system by simply loading your cpufreq low-level hardware driver. A conservative based governor that aims to provide more aggressive battery savings while screen is off.
Dance Dance (NEW 5/15) - Based on conservative with some smartass features, it scales accordingly to conservatives laws. So it will start from the bottom, take a load sample, if it's above the upthreshold, ramp up only one speed at a time, and ramp down one at a time. It will automatically cap the off screen speeds to 245Mhz, and if your min freq is higher than 245mhz, it will reset the min to 120mhz while screen is off and restore it upon screen awakening, and still scale accordingly to conservatives laws. So it spends most of its time at lower frequencies. The goal of this is to get the best battery life with decent performance. It is a performance focused governor but also blends with some battery savings.
Adreno Idler Information:
Enabled - Uses a different calculation method on top of Adreno TZ just for calculating frequency for idle to reduce the wasted power coming from stock Adreno TZ while maintaining high-performance.
Other Information:
Moved Core Control To Kernel - Moved core control from out-of-tree module into the kernel proper. Core control monitors load on CPUs and controls how many CPUs are available for the system to use at any point in time. This can help save power. Core control can be configured through sysfs interface.
Moved Core Control Trace Events To Scheduler
Added A Knob To Disable The core_ctl (Core Control) - The CPU hotplug tests does not work with core_ctl compiled statically into kernel. Provide an interface to disable the hotplug by core_ctl.
Enabled LZ4 Compression & Added ExFAT Filesystem
Fixed Various Issues
Source Code: https://github.com/SaintZ13/obar_kernel
Nice can't wait to try this out!
Sent from my SM-N920P using Tapatalk
Thanks for the new ROM! Does this add back the stock LG gallery and music player, or are those still removed?
Cubit33 said:
Thanks for the new ROM! Does this add back the stock LG gallery and music player, or are those still removed?
Click to expand...
Click to collapse
Yes there included. I accidently removed a file that connects to Sprint. Will add it later and upload!
SaintZ93 said:
Yes there included. I accidently removed a file that connects to Sprint. Will add it later and upload!
Click to expand...
Click to collapse
Thanks! Looking forward to testing.
Would you guys prefer this to be straight stock or should I mod it up?
Mod it up!
Sent from my LG-LS997 using Tapatalk
SaintZ93 said:
Would you guys prefer this to be straight stock or should I mod it up?
Click to expand...
Click to collapse
Mods are great, but I'd also be a fan of posting your base rom that is just the "stock features" you have listed above. A slim base version in addition to the modded out version basically.
Mods, mods, mods
So glad to see you over here on the sprint V20 Saint! You always put out great ROMs and you never disappoint! Looking forward to this one.
BTW, mod it up!
Thread closed temporarily at OP's request
Edit: Reopened at OP's request
Okay guys I was finally able to mod it up and make it a very worthy ROM. Enjoy!
Glad you found it useful, man.
warBeard_actual said:
Glad you found it useful, man.
Click to expand...
Click to collapse
Hey man thanks for it! Now your scaring people by being out of the axon threads hahaha
dowloading now
thanks @SaintZ93
OBAR for the note 4 was great
SaintZ93 said:
Would you guys prefer this to be straight stock or should I mod it up?
Click to expand...
Click to collapse
Mod it up. Viper4 and 3minit battery are my favorite add ons.
Some debloat is nice.
I used to run OBAR on either my note 3 or 4.
Downloaded and excited to try it out - but loving classic rom to much to try it out just yet. Soon.
Thank You
Mod the daylights out of it!! I been dying for a good one like that WETA rom but cant use it. Im always dying to try something new tho
Running good on my v20. Nice and smooth. :good::good::good:
Used to love this on my note 4 good to see u bro
This is the first project I've shared on XDA, though I've maintained it for personal use for a while and posted some prior incarnations on Google+. Hope you enjoy it!
Features:
December 2018 security patch
open source: kernel, anykernel
forked from Franco Kernel
merged Linux Stable 3.10.108
Compiled with Linaro 4.9 and CopperheadOS's Hardened Clang
I/O Schedulers: noop (default), cfq, deadline, fiops, row, zen, maple, sioplus
TCP algorithms: Bic, Cubic, Htcp, Hybla, Vegas, veno, Westwood (default), Reno
FK Features: disabled verified boot flag for Android Pay (root still breaks), support for FKUpdater performance profiles, support for FKUpdater App (not verified as I don't use the app myself), KCAL tweaks in init script.
Reduced wifi wakelocks and wakelock period
Removed possible bluetooth memory leak
KCAL color control support
KCAL brought to Linux guidelines
Spectrum Profile Support: dozens of profiles from around the web included in source code
Touchboost disabled in spectrum profile
Filesystem Support: F2FS, vFAT, EXT4, NTFS
MSM hotplug driver (disabled by default, but toggle included in source code)
Fingerprint boost from Electron Kernel
Wireguard support
Power Efficient Workqueues
State Notifier
Tickless System / Idle
Gentle Fair Sleepers
Hima hotplug driver (see 2018-09 release notes)
Wake Gestures (partial, see 2018-09 release notes)
Many security / hardening features from CopperheadOS (see 2018-12 release notes)
Downloads:
Oreo, 8.1 (Stable / Final): angler-kernel-20181221.zip
Pie, 9.0 (Testing Builds): pie-testing-aosip-20190130.zip, pie-testing-statixos-20190130.zip
Installation:
Boot to TWRP, backup (boot, system, data)
Wipe Dalvik / ART Cache and Cache
Flash the kernel.zip
Wipe Dalvik / ART Cache and Cache
Reboot and enjoy
Note: Sometimes rebooting directly from TWRP results in a boot freeze at the Google splash screen. Just power off and boot up again.
Battery Life / Performance Tests:
Spectrum: Battery: Total Drain: 6.8%/h, Sleep Drain: 4.96%/h, 11% SOT, 17.8 Hour Test (tested version - kernel 20180728, battery v1.3 profile)
Spectrum: Balance: Total Drain: 9.7%/h, Sleep Drain: 6.6%/h, 12% SOT, 19 Hour Test (tested version - kernel 20180728, balance v1.2 profile)
Older Version: June 2018
Thanks:
@osm0sis / AnyKernel2
@nathanchance / Flash Kernel and many guides
@franciscofranco / Franco Kernel
@frap129 / Electron Kernel
@flar2 / ElementalX Kernel
@Adi Shakthi / God's Kernel
@zx2c4 / Wireguard
@phantom146
PS: I'm on Telegram now too!
Profile: @savagezen
Discussion for this kernel: @sz_kernel_angler
Want to stay even more up to date?
Install the IFTTT app
Get notifications for testing releases - Applet Link
Get notifications for source code releases - Applet Link
Changelog:
v20181221 Release Notes
v20181124 Release Notes
v20180910 Release Notes
v20180808 Release Notes
v20180728b - fixed spaces in localversion resulting in kernel name not showing in Settings app.
v20180728 Release Notes
Bugs:
Boot Loop / Freeze on Android 9.0 Oreo.
FAQ:
Need Help / Want to Help? Join the my Telegram Channel: @sz_kernel_angler
Is this kernel compatible with Android Pie (9.0)? It should work out of the box, however several users have reported boot freezes / loops on Pie. I haven't had a chance to test it fully in Pie and am still on Oreo myself. If you run into issues, try running with SELinux as permissive or reach out on Telegram.
Nice, gonna give this a run. Kudos for adding detailed instructions on your site.
Nice, was hoping for new kernel a long time
I would like to suggest the "Hima Hotplug" for your kernel, it is so fluid and great on battery life (experience from sphinx kernel for bullhead)
Pump Ac7i0n said:
Nice, gonna give this a run. Kudos for adding detailed instructions on your site.
Click to expand...
Click to collapse
You're welcome. It is as much for me to remember how to do stuff in the future with other devices as anything else. Glad others can benefit from it as well.
eurochild said:
Nice, was hoping for new kernel a long time
I would like to suggest the "Hima Hotplug" for your kernel, it is so fluid and great on battery life (experience from sphinx kernel for bullhead)
Click to expand...
Click to collapse
Thanks for the suggestion. Browsing source code now...
savagezen said:
You're welcome. It is as much for me to remember how to do stuff in the future with other devices as anything else. Glad others can benefit from it as well.
Thanks for the suggestion. Browsing source code now...
Click to expand...
Click to collapse
just wanted to say solid first public kernel. super smooth
Thank you for the new kernel,so far so good
Smooth so far, great job.
though is it just me or does the Settings app display "Unavailable" under Kernel version? EX Kernel Manager displays the kernel version just fine.
Maybe it has something to do with the presence of spaces in the kernel version name?
aureljared said:
Smooth so far, great job.
though is it just me or does the Settings app display "Unavailable" under Kernel version? EX Kernel Manager displays the kernel version just fine.
Maybe it has something to do with the presence of spaces in the kernel version name?
Click to expand...
Click to collapse
I see the same under about phone.
aureljared said:
Smooth so far, great job.
though is it just me or does the Settings app display "Unavailable" under Kernel version? EX Kernel Manager displays the kernel version just fine.
Maybe it has something to do with the presence of spaces in the kernel version name?
Click to expand...
Click to collapse
Lawlrus said:
I see the same under about phone.
Click to expand...
Click to collapse
same here, nothing so important. if you click on it it shows the kernel info (atleast that is what happens on aosip rom)
eurochild said:
same here, nothing so important. if you click on it it shows the kernel info (atleast that is what happens on aosip rom)
Click to expand...
Click to collapse
Yeah I agree, it is, by no means, a deal-breaker. I just wanted to point it out for newcomers because I sure had a grand time panicking over whether or not the installation went through.
Currently using this kernel with ABC rom, so far the best kernel ever, very smooth and good heat output
aureljared said:
Yeah I agree, it is, by no means, a deal-breaker. I just wanted to point it out for newcomers because I sure had a grand time panicking over whether or not the installation went through.
Click to expand...
Click to collapse
eurochild said:
same here, nothing so important. if you click on it it shows the kernel info (atleast that is what happens on aosip rom)
Click to expand...
Click to collapse
This does work on AOSiP. Stock ROM (and maybe others) it does not appear after tapping on "Kernel Version" in settings. As noted, third party apps like EX Kernel Manager and Kernel Auditor seem to display the kernel version correctly.
There are, in fact, spaces in LOCALVERSION in the config file. I'll add this under bugs in the second post and update when it's fixed.
PS: Glad you guys are enjoying it and to hear it runs smooth and cool! Usage stats for the 'battery' spectrum profile are in the updated OP. Testing the 'balance' profile now.
UPDATE 8/1: The 'kernel version' issues has been fixed. Notation is in second post and download link has been updated in OP.
This kernel kicks ass! Seriously, great work. One of my major complaints with the 6P was its over heating and then thermal throttling. I just didn't play certain games because of it. Now, after flashing this kernel it runs smooth and cool and games work again. Unreal. Truly love the way the phone works now. Not bad for battery life either but it's not my primary any more.
galakanokis said:
This kernel kicks ass! Seriously, great work. One of my major complaints with the 6P was its over heating and then thermal throttling. I just didn't play certain games because of it. Now, after flashing this kernel it runs smooth and cool and games work again. Unreal. Truly love the way the phone works now. Not bad for battery life either but it's not my primary any more.
Click to expand...
Click to collapse
Good to hear! Did you use the Gaming spectrum profile? I'm don't use my phone for games so I didn't test that outside of synthetic benchmarks. Also, the Battery spectrum profile should give pretty good battery life as it's very conservative.
Spoiler: I'm working on maybe adding the chill or relaxed governors to test as well.
No profiles, just default settings. I usually run a week or two on default before I mess around just so I can tell the difference in the tweaks.
I might play around but this phone is just for messing about now, picked up the Essential on the Prime deal and quite like it so the 6P is not a daily driver.
Gotcha. FYI the balanced profile is enabled by default.
savagezen said:
Gotcha. FYI the balanced profile is enabled by default.
Click to expand...
Click to collapse
Do you happen to have the link somewhere?
dirtyreturn said:
Do you happen to have the link somewhere?
Click to expand...
Click to collapse
All the profiles are in my AnyKernel repo on GitHub. There are a total of 30 profiles from around the web even though the Spectrum App only uses those numbered 0, 1, 2, and 3. I include my built kernel zImage-dtb in the AnyKernel repo so that you can clone it yourself and apply a different profile "manually" if you like. Just change the number in ramdisk/init.spectrum.sh, zip it up, and flash it.
Code:
if [ ! -f /data/property/persist.spectrum.profile ]; then
setprop persist.spectrum.profile 0 # change this number
fi
Note, if you use this method, and later select a profile from the Spectrum App, the Spectrum App choice will override the initial one, including after reboot -- because it applies the settings once the user space is reached.
@savagezen thanks! Also, kernel link?? I must be missing it.. Is it in the OP?
Sent from my PH-1 using Tapatalk