Hi all,
I really need to get lollipop on my Transformer Prime I know my way around the tablet pretty well but am new to ROMs and rooting. I've done some very basic stuff by following youtube videos but cannot figure out how to update it to lollipop. Everytime I read instructions on the forums I get completely lost. I am a pilot and have been using my TF201 for 4 years now for flying. The app I use isn't compatible with my old firmware anymore. I would really appreciate if someone would be kind enough give me some very dumbed down instructions on how to update my device's firmware. It's either I figure out how to do this, or go broke on a new tablet. Your guy's help would do me a huge solid. For the purposes of this I already factory reset my tablet to undo my current rooting mess and updated it back to version stock 4.1.1
chardsregards said:
Hi all,
I really need to get lollipop on my Transformer Prime I know my way around the tablet pretty well but am new to ROMs and rooting. I've done some very basic stuff by following youtube videos but cannot figure out how to update it to lollipop. Everytime I read instructions on the forums I get completely lost. I am a pilot and have been using my TF201 for 4 years now for flying. The app I use isn't compatible with my old firmware anymore. I would really appreciate if someone would be kind enough give me some very dumbed down instructions on how to update my device's firmware. It's either I figure out how to do this, or go broke on a new tablet. Your guy's help would do me a huge solid. For the purposes of this I already factory reset my tablet to undo my current rooting mess and updated it back to version stock 4.1.1
Click to expand...
Click to collapse
I've been happily using:
http://forum.xda-developers.com/transformer-prime/development/rom-katkiss-5-1-tf201-22-t3080892
The first steps have the directions to get you up and running.
chardsregards said:
Hi all,
I really need to get lollipop on my Transformer Prime I know my way around the tablet pretty well but am new to ROMs and rooting. I've done some very basic stuff by following youtube videos but cannot figure out how to update it to lollipop. Everytime I read instructions on the forums I get completely lost. I am a pilot and have been using my TF201 for 4 years now for flying. The app I use isn't compatible with my old firmware anymore. I would really appreciate if someone would be kind enough give me some very dumbed down instructions on how to update my device's firmware. It's either I figure out how to do this, or go broke on a new tablet. Your guy's help would do me a huge solid. For the purposes of this I already factory reset my tablet to undo my current rooting mess and updated it back to version stock 4.1.1
Click to expand...
Click to collapse
When it comes to ROMs there are a few things I always do, first make a backup of any files you might need should you manage to brick your tablet (search the forums, theres plenty of info on how to do it) then have a full nandroid backup of your current working setup to revert to should a brick happen (this can be done through your Recovery Program {TWRP,CWM} and I do it twice for good measure) then update any software you might need to in order to install the ROM of your choice then follow the install instructions for the ROM you want to install. I think for Lollipop KatKiss is probably one of the best if not the best Lollipop ROM, I have used it for a couple weeks and had no issues. I am currently running a BETA of marshmallow which has some weird issues on my Prime, so I would say Marshmallow is not yet there in terms of stable everyday use, but in due time it will be. Hope it helps, feel free to ask me any questions you might have.
chardsregards said:
Hi all,
I really need to get lollipop on my Transformer Prime I know my way around the tablet pretty well but am new to ROMs and rooting. I've done some very basic stuff by following youtube videos but cannot figure out how to update it to lollipop. Everytime I read instructions on the forums I get completely lost. I am a pilot and have been using my TF201 for 4 years now for flying. The app I use isn't compatible with my old firmware anymore. I would really appreciate if someone would be kind enough give me some very dumbed down instructions on how to update my device's firmware. It's either I figure out how to do this, or go broke on a new tablet. Your guy's help would do me a huge solid. For the purposes of this I already factory reset my tablet to undo my current rooting mess and updated it back to version stock 4.1.1
Click to expand...
Click to collapse
Chards, I'm a pilot too! Good luck with the root. In a nutshell, you need to do the "Flatline" method to get nvflash enabled. Follow their tutorial and make all the backup files... really. After that you're bullet proof. From there use the nvflash guide to upgrade the bootloader to Hairy bean. No you can't just flash it. You can't downgrade it... nothing. The only way to get the hairybean bootloader is to "unblob" it and flash it directly with nvflash. After that, follow the instructions over at taconikki's threads. Pick 5.0 or his new 6.0. Just follow their directions and you'll be all set. Best of luck!
Related
Hello fellow transformer prime users,
I have been looking over many threads on how to update to JellyBean and have not come to the decision of whether I should update at the current moment or wait. The reason I feel uncomfortable with updating is that I soft bricked my prime when I did the .21 to .28 update, all due to my human error of not triple checking over myself. Thankfully I have superior knowledge of the android system because I have been using Android since the G1 days (yup I am not a noob, but neither am I an expert in these things, you can say that I am an intermediate power user). Fortunately I was able to unbrick using multiple methods and abd tricks that I found on these threads, and I truly thank everyone of the big guys out there for helping out though my difficult time. Although I had alot of fun in that ordeal, I surely DO NOT WANT TO GO OVER THAT HARDSHIP AGAIN (sorry but I have been emotionally scared for life).
Although it may seem that this post is question oriented I would like to note that it is mostly a plead for an update method suited for my particular setup.
On to the details:
At the current moment my prime is being used as a daily driver. It is my college life all bundled in to one awesome device.
Android version 4.0.3 ICS
It is rooted
it has IML74. US_epad-9.4.2.28.2-20120529 build
stock to the root <----get it.... its a joke
It has latest superuser
it has been backed up
Voodoo OTA root keeper shows 100%
The device is NOT UNLOCKED, it does not say that it is unlocked on start-up, ITS LOCKED
It has CWM 5.5.0.4
My first method of rooting was done though vipermods exploits
Last time I updated I just flashed the proper/suitable stock .28 build that I have now through CWM
At the current moment everything works wonderfully and I love this device.BUT I am afraid of bricking it...I have had bad dreams....BAD BAD NIGHTMARES....
So the question is...I mean comment...(sorry if this does not belong on here)...
What would be a best update method for my current setup
I thank all that help me out and apologize to the forum members and admins if this does not belong here...
I have made a video showing you my current setup youtu.be (sorry, delete this stuff, sorry) /xCQP6O1NpAY , thank you and I hope to soon be playing around with JB
I will also make a video of my update process so others with the same issue can follow my methods.
Thank you,
SpeedV
More info
SpeedV said:
Hello fellow transformer prime users,
I have been looking over many threads on how to update to JellyBean and have not come to the decision of whether I should update at the current moment or wait. The reason I feel uncomfortable with updating is that I soft bricked my prime when I did the .21 to .28 update, all due to my human error of not triple checking over myself. Thankfully I have superior knowledge of the android system because I have been using Android since the G1 days (yup I am not a noob, but neither am I an expert in these things, you can say that I am an intermediate power user). Fortunately I was able to unbrick using multiple methods and abd tricks that I found on these threads, and I truly thank everyone of the big guys out there for helping out though my difficult time. Although I had alot of fun in that ordeal, I surely DO NOT WANT TO GO OVER THAT HARDSHIP AGAIN (sorry but I have been emotionally scared for life).
Although it may seem that this post is question oriented I would like to note that it is mostly a plead for an update method suited for my particular setup.
On to the details:
At the current moment my prime is being used as a daily driver. It is my college life all bundled in to one awesome device.
Android version 4.0.3 ICS
It is rooted
it has IML74. US_epad-9.4.2.28.2-20120529 build
stock to the root <----get it.... its a joke
It has latest superuser
it has been backed up
Voodoo OTA root keeper shows 100%
The device is NOT UNLOCKED, it does not say that it is unlocked on start-up, ITS LOCKED
It has CWM 5.5.0.4
My first method of rooting was done though vipermods exploits
Last time I updated I just flashed the proper/suitable stock .28 build that I have now through CWM
At the current moment everything works wonderfully and I love this device.BUT I am afraid of bricking it...I have had bad dreams....BAD BAD NIGHTMARES....
So the question is...I mean comment...(sorry if this does not belong on here)...
What would be a best update method for my current setup
I thank all that help me out and apologize to the forum members and admins if this does not belong here...
I have made a video showing you my current setup youtu.be (sorry, delete this stuff, sorry) /xCQP6O1NpAY , thank you and I hope to soon be playing around with JB
I will also make a video of my update process so others with the same issue can follow my methods.
Thank you,
SpeedV
Click to expand...
Click to collapse
More info....
Before my .28 update with sparky's rom i had the .21 vipermod exploit....i had flashed cwm and updated my rom from the previous .18, and even before that i had root through vipermods initial root method.
I know my bootloader is locked, but how than is it posible for me to flash roms for unlocked bootloaders. The sparky rom that i flashed is supposedly for unlocked bootloaders.
I am sooooo confused....i dont want to brick my prime again.
More and more info.....
HOW I BRICKED IT BEFORE:
so i was on .21 and wanted to update to latest .28 build
I manually downloaded the stock.28 rom from asus website
I updated through icon on bottom right hand area...you know
All was going well then boooooom i got soft bricked with a bootloop
Did the popular unbrick method through abd then i found sparkys rom.
Flashed sparkys rom through cwm (i uploaded the rom through this abd command file mover thing i found on another xda forum whiles in cwm)
Flashed and installed perfectly
Ok now what should i do....unlock my device and twrp recovery it or whatever its called and then go from there?
Or just wait....i dont know where to start...and frankly i am very displeased with the amount of clarity out of the top guides out there....and all i see is a plethora of bricked devices...sad face...
Ok once again Thank You for your time and efforts.
SpeedV
Hey, could you please give some more information and links about the cwm you used and which popular adb unbrick method?
Weired issue...i heard about perfectly unlocked primes, about primes with locked bootloader "forever" (like my device), but never heard anything about an invisible unlock after softbrick...
Maybe somebody can figure out where "the magic" happened...
Grz
Sent from my Transformer Prime TF201 using xda premium
sigh
beckzz said:
Hey, could you please give some more information and links about the cwm you used and which popular adb unbrick method?
Weired issue...i heard about perfectly unlocked primes, about primes with locked bootloader "forever" (like my device), but never heard anything about an invisible unlock after softbrick...
Maybe somebody can figure out where "the magic" happened...
Grz
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
I just replied to you but my post did not go through....i spend a good hour finding stuff out for an answer....and now all gone....
FUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
ok simple answer: I unlocked device...I think through a vipermod primetime release that had it...i think v4 unlock tool don't remember
was on .11 then on .18 then to .21 now on .28
did root with vipermod, and installed cwm in .18 or .21 dont remember
got bricked when i manually updated to .28 from download from asus site
think that there is a method of binging back primes that are bricked
using quick abd pusher...thats what i used in cwm to get sparky's rom on prime and flashed
now working
I really dont give a damn anymore...I hate xda forums right now soooooo bad. I just wasted 1 HOUR, or even more 1+ hours with a perfect reply and all gone because of the stupid forum....
sorry man
I'm done
Afternoon all,
I have a Prime that presently has Android version "4.0.3" and build number "AndroWook Prime v2.1". I am attempting to upgrade to the lastest Hairybean release, but I am uncertain as to which instructions to follow as I am unable to determine my bootloader version. Any suggestions?
Thanks
CoosaCounty said:
Afternoon all,
I have a Prime that presently has Android version "4.0.3" and build number "AndroWook Prime v2.1". I am attempting to upgrade to the lastest Hairybean release, but I am uncertain as to which instructions to follow as I am unable to determine my bootloader version. Any suggestions?
Thanks
Click to expand...
Click to collapse
I got confused there for a minute but you are talking about Androwook 2.1 and not Androwook Hairybean 2.1.
By the Android version number you are still on ICS.
I would highly advise that you go thru the nvflash process first as you can only do it while on ICS and it makes you brick proof.
Once you have done that you just have to follow the instructions in the Hairybean thread for 2.2 which will upgrade your bootloader and recovery and then flash the rom.
I'd wait a week tho as 2.3 is due soon.
flumpster said:
I got confused there for a minute but you are talking about Androwook 2.1 and not Androwook Hairybean 2.1.
By the Android version number you are still on ICS.
I would highly advise that you go thru the nvflash process first as you can only do it while on ICS and it makes you brick proof.
Once you have done that you just have to follow the instructions in the Hairybean thread for 2.2 which will upgrade your bootloader and recovery and then flash the rom.
I'd wait a week tho as 2.3 is due soon.
Click to expand...
Click to collapse
Thank you very much for the reply; I was unaware that they are two different roms. I am going to find how to follow the nvflash process as you advised.
Thanks again.
CoosaCounty said:
Thank you very much for the reply; I was unaware that they are two different roms. I am going to find how to follow the nvflash process as you advised.
Thanks again.
Click to expand...
Click to collapse
Androwook was based off ICS. When it switched to Jellybean it became Androwook HairyBean.
nvflash is definitely worth it mate. There are people on here who would kill to go back to ICS so they could nvflash backup
Related question to this thread
flumpster said:
Androwook was based off ICS. When it switched to Jellybean it became Androwook HairyBean.
nvflash is definitely worth it mate. There are people on here who would kill to go back to ICS so they could nvflash backup
Click to expand...
Click to collapse
My query is somewhat related, and apologies before it it has previously been addressed in another thread, so I won't start a new thread for my related query.
I have just purchased an ex-display model Asus EeePad Prime here in the UK on eBay for about the third of the price as a new one. So far, all seems to be working and running fine, dongleless Wi-Fi included, but I have a question.
As soon as I turned on Wi-Fi and connected with my router, my Asus Prime started 'automatically' downloading what I assume is (the latest) firmware, I couldn't find a way to cancel the download (no user-manual, unfortunately), so I immediately turned off Wi-Fi, as I have no idea what version firmware my Prime is downloading. Right at the moment, it's running stock 4.0.3, but I don't want it downloading some firmware that I may regret at some point later. So, may I ask, is it advisable to let the firmware download and do its thang, or wait for another, different or better firmware. I am totally new to using tablets and my only other Android device is a Samsung Galaxy S3 running JB 4.1.2,
Without reading through an online manual (probably a fruitless exercise anyway) or wading though hundreds of forum posts, would one of you more experienced in firmware than I, be good enough to advise me about which is the best, most stable firmware I should be running on my Asus Prime, as well as how to disable automatic firmware updates (I couldn't find an option for that in the settings yet), and any more cautionary steps I should be advised to take before I mess up or brick my new tablet....OR point me to a thread that already has the answers to my questions here?
I'm finding this a bit frustrating, as obviously, I can't use Wi-Fi for anything else until I have an answer as to how to stop automatic downloading of firmware via Wi-Fi.....help?!?
Many thanks before.
NB.
My Kernel version:-
2.6.39.4
android @venus #1
Al.Gray said:
My query is somewhat related, and apologies before it it has previously been addressed in another thread, so I won't start a new thread for my related query.
I have just purchased an ex-display model Asus EeePad Prime here in the UK on eBay for about the third of the price as a new one. So far, all seems to be working and running fine, dongleless Wi-Fi included, but I have a question.
As soon as I turned on Wi-Fi and connected with my router, my Asus Prime started 'automatically' downloading what I assume is (the latest) firmware, I couldn't find a way to cancel the download (no user-manual, unfortunately), so I immediately turned off Wi-Fi, as I have no idea what version firmware my Prime is downloading. Right at the moment, it's running stock 4.0.3, but I don't want it downloading some firmware that I may regret at some point later. So, may I ask, is it advisable to let the firmware download and do its thang, or wait for another, different or better firmware. I am totally new to using tablets and my only other Android device is a Samsung Galaxy S3 running JB 4.1.2,
Without reading through an online manual (probably a fruitless exercise anyway) or wading though hundreds of forum posts, would one of you more experienced in firmware than I, be good enough to advise me about which is the best, most stable firmware I should be running on my Asus Prime, as well as how to disable automatic firmware updates (I couldn't find an option for that in the settings yet), and any more cautionary steps I should be advised to take before I mess up or brick my new tablet....OR point me to a thread that already has the answers to my questions here?
Many thanks before.
NB.
My Kernel version:-
2.6.39.4
android @venus #1
Click to expand...
Click to collapse
You are still on ICS and at the moment you can make nvflash backups that will make you completely brickproof. It will also allow you to go back to ICS from jellybean if you wanted to which people without the backups cannot do.
I would highly advise that you make these backups before upgrading anything.
You will need an unlocked bootloader to be able to do nvflash.
http://androidroot.mobi/pages/tegra3-guide-nvflash/
flumpster said:
You are still on ICS and at the moment you can make nvflash backups that will make you completely brickproof. It will also allow you to go back to ICS from jellybean if you wanted to which people without the backups cannot do.
I would highly advise that you make these backups before upgrading anything.
You will need an unlocked bootloader to be able to do nvflash.
http://androidroot.mobi/pages/tegra3-guide-nvflash/
Click to expand...
Click to collapse
Thanks for that tidbit, certainly something I'll need to look into (after finding 'Nerves of Steel' <g> ).....but more concerned about disabling this (unknown) firmware update auto-downloading first?.......Diolch i ti ffrind!
NB.
Guess I should read up as much as I can on AndroWook too, eh?
Oddly, the automatic firmware update OTA download has (thankfully) stalled/stopped/stuck at 23% and I have no idea what I did to stop it downloading or even how. Anyone got a clue to help me figure it out? All other downloads via Wi-Fi are working as they should.
But, saying the firmware download has stopped, is there any way that anyone knows off to cancel/delete the 23% of it that has been automatically downloaded and taking up valuable space on my internal memory, please? (I'm guessing I'd need to root my Prime to do that?)
One last important (important to me anway lol), question.....is it advisable or not to make those nvflash backups before of after rooting my ICS 4.0.3 firmware (I was thinking of using 'Viper' to root it, or maybe you guys can suggest a better application to use?), or won't rooting it before I've made those backups make any difference? Please advise, thanks.
Hope that's not too many dumb questions, but hope one of you if good and has time enough to answer them for me........ANYone......please??
I need some help.... I just got a tf201 and it came with 4.0.3 with the . 28 so I thought it would be time to install a custom rom. So I read that nvflash was the thing to install and use but every page with instructions leads me to another page to download but the files are no longer on there...I have rooted and installed a couple different roms on my Kindle and Android phone so I know just enough to get myself into trouble and want to protect myself..... I have to do some searching on fastest also, I used it on my Kindle but that was over a year ago so I have to remember how to get into fastboot.....
OK I think I figure it out because of reading all the other post....It looks like the files were removed when they came out with the JB guide of doing it....So my question is then I should update to the 4.1 update then follow the guide over on mobi for the JB correct? I would really like someone to offer some suggestions before I go ahead and update and screw myself.....
easylistener said:
I need some help.... I just got a tf201 and it came with 4.0.3 with the . 28 so I thought it would be time to install a custom rom. So I read that nvflash was the thing to install and use but every page with instructions leads me to another page to download but the files are no longer on there...I have rooted and installed a couple different roms on my Kindle and Android phone so I know just enough to get myself into trouble and want to protect myself..... I have to do some searching on fastest also, I used it on my Kindle but that was over a year ago so I have to remember how to get into fastboot.....
Click to expand...
Click to collapse
easylistener said:
OK I think I figure it out because of reading all the other post....It looks like the files were removed when they came out with the JB guide of doing it....So my question is then I should update to the 4.1 update then follow the guide over on mobi for the JB correct? I would really like someone to offer some suggestions before I go ahead and update and screw myself.....
Click to expand...
Click to collapse
Yes, you would be best off updating to the latest official 4.1.1 version (10.4.2.18) and using the guides and files designed for JB to make your NVFlash backups :good:.
Do read the official guide but there is also a clearer and more detailed guide to NVFlash for JellyBean HERE.
Note: it does say you need the 10.4.2.15 bootloader but the method and files work fine on the 10.4.2.18 also.
Do read the instructions carefully as the prime is a lot easier to brick than the other devices you have experience on.
Ok need some more help..... I found out my prime had twrp already installed.. So can I install nvflash after twrp has already y been installed?.. .. I have Ics on it and seems everything today is for jb......How or where can I find how to update my prime to jb since it has already been rooted and unload ked bootloader...... I don't want to brick it but want to get it updated to the point where these guides I can read and follow?
I have posted it on another thread but no luck so I will post a new thread. I have tf201. Its an awesome device (aside from the week wifi signal) and I have been happily draining its battery for the last 2.5 years. However the time has come to move to a custom rom. Asus abandoned the device for no reason and things are starting to slow down and its just sad. So I am thinking of taking the big step for rooting and going to a custom Rom in order to restore the glory of this awesome device. I searched and I have concluded that perhaps the best solution is the SlimKat rom but here things get tricky. Most of the guides I have seen mention that though its a TF300 rom it is compatible with TF201 but the process only mentions guidelines for TF300 users.
So I need help and I am sure there are a couple of people out there in the same need. I am on a stock version of 4.1.1 with a 10.4.2.18 kernel. Can anyone provide a full process for doing the upgrade. And I mean a full process like rooting, installing twrp , upgrading kernel and etc. I know most people post links saying go there and you will find what u need but when a thread is 100 pages its like searching a needle in a haystack and I really don't want to brick my device doing something, someone suggested and 10 pages later it was discovered that he was wrong and I missed it.
I know its a lot of asking but for someone who is fairly knowledgeable with android with the device I am sure that devoting a little time for people who just started experimenting with android development will do a lot of good for setting some good foundation for them to go on and one day give back to the community.
Thank you in advance.
Nailen said:
I have posted it on another thread but no luck so I will post a new thread. I have tf201. Its an awesome device (aside from the week wifi signal) and I have been happily draining its battery for the last 2.5 years. However the time has come to move to a custom rom. Asus abandoned the device for no reason and things are starting to slow down and its just sad. So I am thinking of taking the big step for rooting and going to a custom Rom in order to restore the glory of this awesome device. I searched and I have concluded that perhaps the best solution is the SlimKat rom but here things get tricky. Most of the guides I have seen mention that though its a TF300 rom it is compatible with TF201 but the process only mentions guidelines for TF300 users.
So I need help and I am sure there are a couple of people out there in the same need. I am on a stock version of 4.1.1 with a 10.4.2.18 kernel. Can anyone provide a full process for doing the upgrade. And I mean a full process like rooting, installing twrp , upgrading kernel and etc. I know most people post links saying go there and you will find what u need but when a thread is 100 pages its like searching a needle in a haystack and I really don't want to brick my device doing something, someone suggested and 10 pages later it was discovered that he was wrong and I missed it.
I know its a lot of asking but for someone who is fairly knowledgeable with android with the device I am sure that devoting a little time for people who just started experimenting with android development will do a lot of good for setting some good foundation for them to go on and one day give back to the community.
Thank you in advance.
Click to expand...
Click to collapse
I am in the exact same position as you.
Lets hope someone can help!!!
Hello,
I was in the same position as you. And I decided to unlock and install a new rom. I did that on July. In concrete in have installed the CROMBi-kk ROM the link in the developers section is: http://forum.xda-developers.com/showthread.php?t=2773812
To unlock is very easy. Just download the Asus app and install it in Android and follow the steps.
I Followed this link: http://forum.xda-developers.com/showthread.php?t=2041627
In this link I did the unlock and the installation of Adroid SDK (this driver for the PC for recognizing the device when you start in bootloader mode).
After installing the driver I follow the post #4 in the CROMBi-kk thread to flash and install the new rom.
Sorry for my English. I don’t know I have explained it ok.
Greetings everyone
I have this awesome tablet for my young son who loves to watch YouTube kids
The current FW which is an OFW will not permit the DL of YouTube kids I think due to compatibility issues etc.
I ask anyone to advise on how to load a CFW or something to allow me to run YTK and other items. Obviously I would need android 5 or higher.
Where could I find step by step instructions to do this? I am not sure of the detailed ways so I am needing patience from you.
I would appreciate all the help, so will my son
Thank you
Have you tried rooting it? What model is your tablet - 10.1?
cmichael258 said:
Have you tried rooting it? What model is your tablet - 10.1?
Click to expand...
Click to collapse
Thank you for replying!!!
Indeed a 10.1 P7500
Rooting is prob the way to go, im just looking for an updated tutorial with active file links but not winning.
Any suggestions
defibjh said:
Thank you for replying!!!
Indeed a 10.1 P7500
Rooting is prob the way to go, im just looking for an updated tutorial with active file links but not winning.
Any suggestions
Click to expand...
Click to collapse
Try the 7.1.2 Nougat Rom
I prefer Nougat without gapps and overclock the CPU to 1400 MHz.
https://www.google.nl/amp/s/forum.x...elopment/rom-android-7-0-nougat-t3471350/amp/
Good luck
I have the 10.1 GT-P 7510 I had XDA root it for me through their 1 click root system because I didn't want to take the chance on messing anything up because you read so much online about people bricking devices trying to root them. I also have kind of the same question, I have an old version of Netflix on mine that runs perfect but would like to go to a newer version, and I would also like to install kodi or xbmc on this tablet so I can take it with me on trips and be able to watch movies. after extensive searching I was able to find out that supposedly kodi 14.2 helix will work on this tablet, but trying to find it is essentially impossible, and when you do find the file it always seems to be broken in some way and wont work, supposedly there is a program called SBMC which is a fork of kodi for this device, but can't find that one anywhere. so my question is this because I am so new to this rooting thing. My tablet is already rooted with Super SU and I would like to know where I could look to get instructions how to install the nougat 7.1 rom or even a different rom to be able to go to some newer apps at this point I have been a little timid about doing too much because at least Netflix is working, and the xda tech told me not to factory reset it update it and a few other things, and a few other things because then it won't be rooted. any help in this will be very much appreciated and please feel free to move this post if it is in the wrong area and I apologize it is my first time posting. I will say this though it was well worth the 40.00 to have xda root it for me because it can be a bigger process than people think depending on the device the guys are awesome.
Rick
I also have a 10.1 GT-P 7510(wifi) 32g. The P7500 and the P7510 are basically the same and use the same firmware. I've had mine rooted for a long time. I use Kingoroot because it's easily replaced with Supersu. As far as ROMs go I've had only difficulties. What I can tell you is that for myself this has been a little difficult up til possibly just recently. There are many ROMs available here at XDA, most of them were unstable. The 7.1 Nougat, https://forum.xda-developers.com/galaxy-tab-10-1/development/rom-android-7-0-nougat-t3471350, looks promising but I haven't got CWM recovery to flash the zip without giving me a "No File_Contexts warning. If I could get a tar.md5 ROM I would use Odin3 in a heartbeat. Version 1.85 is the one I use most and thats just to undo the softbricks, by flashing in the original firmware. If you live in the US its this, https://www.androidlegend.com/update-samsung-galaxy-tab-10-1-wi-fi-p7510-with-ics-4-0-4-uelpl/. Run that through Odin if you ever get stuck in bootloop crash the tab, pretty much anything but a hardbrick. The 8.0 Rom I'm waiting for the developers to complete.