Hi, I am not IT guy and not the young man, so that I do not understand the terminology you are using here (the ROOT, the system for the SDcard to be run on etc.).
Would here be somebody, who would explain to the total "stupid" girl, how to reboot mum's tablet? It stopped on "working" mode with 3rd picture on the tablet and "running" (opening) the tablet all the time. Cannot boot to the menu.
Turn it of and then hold power buton with vol up and in recovery mode select wipe data factory reset this will delete all data and tablet will start
Related
Good day!
I'm newbie here. I have a problem with my MSI Enjoy 7 tablet. It has been locked with too many patterns attempt and it asked me for my gmail account. After searching the web, the only solution I have is to flash my tablet. But I don't have any idea about that. How can I backup my ROM, Download the compatible firmware for my tablet and perform flash? Can anyone help me? Thank you!
Genue26 said:
Good day!
I'm newbie here. I have a problem with my MSI Enjoy 7 tablet. It has been locked with too many patterns attempt and it asked me for my gmail account. After searching the web, the only solution I have is to flash my tablet. But I don't have any idea about that. How can I backup my ROM, Download the compatible firmware for my tablet and perform flash? Can anyone help me? Thank you!
Click to expand...
Click to collapse
OK, I'm kinda new to these forums as well, although I do have a certain amount of experience with Android. The simplest way to unlock your device would be to factory reset it (this will erase all the data on your device though). Because you can't unlock the tablet to get to the Settings menu and do this the usual way, you'll need to do it from recovery. From a quick bit of Googling, this is how you get into recovery mode and factory reset from there on your device (note that I don't own an MSI Enjoy 7 so I can't verify this, but it's pretty standard stuff):
1. Make sure your device is completely switched off
2. Press power and volume down at the same time until an Android logo appears
3. Now release the two buttons before holding the power button and pressing the volume button ONCE (don't hold it) and a menu should appear
4. Release the power button and use the volume buttons to scroll to an option which goes something like this: "wipe data/factory reset"
5. Press power to choose this option and again use the volume buttons and power button to confirm (if it asks you).
6. Your device will be reset and unlocked! :good:
jackos2500 said:
OK, I'm kinda new to these forums as well, although I do have a certain amount of experience with Android. The simplest way to unlock your device would be to factory reset it (this will erase all the data on your device though). Because you can't unlock the tablet to get to the Settings menu and do this the usual way, you'll need to do it from recovery. From a quick bit of Googling, this is how you get into recovery mode and factory reset from there on your device (note that I don't own an MSI Enjoy 7 so I can't verify this, but it's pretty standard stuff):
1. Make sure your device is completely switched off
2. Press power and volume down at the same time until an Android logo appears
3. Now release the two buttons before holding the power button and pressing the volume button ONCE (don't hold it) and a menu should appear
4. Release the power button and use the volume buttons to scroll to an option which goes something like this: "wipe data/factory reset"
5. Press power to choose this option and again use the volume buttons and power button to confirm (if it asks you).
6. Your device will be reset and unlocked! :good:
Click to expand...
Click to collapse
Hi jackos2500! Thanks for the information about factory reset. But unfortunately my tablet has already no factory mode that's why I'm asking the other way (Backing up ROM, How to find compatible firmware and Android flash method). Much better if you can assist me on that!
Genue26 said:
Hi jackos2500! Thanks for the information about factory reset. But unfortunately my tablet has already no factory mode that's why I'm asking the other way (Backing up ROM, How to find compatible firmware and Android flash method). Much better if you can assist me on that!
Click to expand...
Click to collapse
Are you sure that there is no factory reset option in the stock recovery? There should be or else you wouldn't be able to factory reset it at all (even if you could unlock the device). Just to clarify, you don't need to be able to unlock the tablet to factory reset (at least that's the way it's been on every Android device I've ever used)
jackos2500 said:
Are you sure that there is no factory reset option in the stock recovery? There should be or else you wouldn't be able to factory reset it at all (even if you could unlock the device). Just to clarify, you don't need to be able to unlock the tablet to factory reset (at least that's the way it's been on every Android device I've ever used)
Click to expand...
Click to collapse
Alright man! Problem solved! After second attempt of web searching, I got the solution. You're right! I thought I lost my Factory Option because my tablet only display an Exclamation point inside a triangular shape with an android logo beside and no factory options to access. The web says that means the factory mode was already deleted and cannot be accessed anymore. But fortunately I got the true answer. I need to press again a combination of buttons in order to access the Factory Mode.
This is what I did:
a) Completely shut down the tablet first.
b) Press power button and volume up simultaneously and hold them for a while; then remove power button after 5 secs.
c) Wait for the green Android icon with a triangle and an exclamation mark to appear before removing the volume up.
d) Press the Power button and Volume up simultaneously for the Factory mode to appear. Remove both.
e) Here you are, the set up screen will appear, and you may proceed to do your selection.
Genue26 said:
Alright man! Problem solved! After second attempt of web searching, I got the solution. You're right! I thought I lost my Factory Option because my tablet only display an Exclamation point inside a triangular shape with an android logo beside and no factory options to access. The web says that means the factory mode was already deleted and cannot be accessed anymore. But fortunately I got the true answer. I need to press again a combination of buttons in order to access the Factory Mode.
This is what I did:
a) Completely shut down the tablet first.
b) Press power button and volume up simultaneously and hold them for a while; then remove power button after 5 secs.
c) Wait for the green Android icon with a triangle and an exclamation mark to appear before removing the volume up.
d) Press the Power button and Volume up simultaneously for the Factory mode to appear. Remove both.
e) Here you are, the set up screen will appear, and you may proceed to do your selection.
Click to expand...
Click to collapse
Nice, glad you got it sorted.
Hello guys,
I'm new and i'm not sure if i posted this under the right place but here goes... (let me know if there is a better place to post this to get help with this problem)
Anyone who can help me revive my device will be given $5 Paypal as a token of appreciation.
I own a Onda v989. A Chinese brand tablet that imitates the iPad with some impressive specs for the price.
Long story short, the tablet came preinstalled with some bloatware, I root it, and used Titanium to backup & uninstall some system apps, which eventually cause the tablet to pop up "unfortunately the process com.android.systemui" non-stop (when i click on ok, it will pop up again, not letting me do anything on the device). I tried rebooting, and as soon as the lock screen comes on, the same error keeps popping up, not letting me do anything. I can not go into settings to factory reset or go into Titanium to back up. The device is not set to usb-debug.
I was hoping i could boot into recovery mode and factory reset from there holding power + volume up (i tried power + volume down too) but either combination seems to do anything (it doesn't even boot if i held power & vol + or power & vol - and only seems to boot if the power button is hold by itself). Once i reboot the device, the cycle of "unfortunately, the process com.android.systemui" starts again.
Could anyone help me solve this problem so i can use my tablet again, specifically, if possible, to boot the device into recovery mode using the buttons. If that's not possible, any alternative to restore my device? If you need additional details, please ask away!
Thanks so much!
I really hope my device is not bricked ;/
you can directly boot into recovery through adb "adb reboot recovery" or "adb reboot fastboot" and factory reset the device.
check this out
forum.xda-developers.com/showthread.php?t=2250285
you can turn on USB debug from pc android.stackexchange.com/questions/112040/how-to-enable-usb-debugging-in-android-if-forgotten-pattern-for-screen-unlock then reboot to recovery "adb reboot bootloader" then you can wipe data/factory reset it.
[Android Tablet Issue] Acer Iconia A1-810 - 1st freezing, 2nd "erasing" screen
Hi,
My tablet Acer Iconia A1-810 (with KitKat version, not rooted) was freezing all the time and I make a normal factory reset from settings. The problem continued to appear and I decided to make a hard factory reset using tablet buttons. After confirm "yes, wipe all data", the tablet start to show a screen with the android logo and saying "erasing...". It's been 3 days now and nothing changes. Not even when I press the reset button and turn on the device that screen appears again.
I've tried to remove (unplug) the battery and plug back in; Tried to get back to recovery mode (power button + volume up) but keeps to show that screen; Any action becomes useless... Nothing works.
Maybe a complete rom flash would do it? But... How to do it if none action on buttons does something?
Any solution?? Thank you for any response!!
genn2 said:
Hi,
My tablet Acer Iconia A1-810 (with KitKat version, not rooted) was freezing all the time and I make a normal factory reset from settings. The problem continued to appear and I decided to make a hard factory reset using tablet buttons. After confirm "yes, wipe all data", the tablet start to show a screen with the android logo and saying "erasing...". It's been 3 days now and nothing changes. Not even when I press the reset button and turn on the device that screen appears again.
I've tried to remove (unplug) the battery and plug back in; Tried to get back to recovery mode (power button + volume up) but keeps to show that screen; Any action becomes useless... Nothing works.
Maybe a complete rom flash would do it? But... How to do it if none action on buttons does something?
Any solution?? Thank you for any response!!
Click to expand...
Click to collapse
I wonder if you were able to find any solution, because i have the same problem. I can get into the recovery mode pressing power + volume up. You have to try when the table is going to reboot; not always work but it load recovery mode sometimes.
HELP! Blue Wave 8 33GT tablet stuck in recovery mode with "No command" message
I got my Blue Wave 8 33GT (not HD+) tablet completely bricked. First of all, I know this is not really a popular device and some of you might not have a single knowledge about this one, but I hope in any way you might help me get this device working again. Thank you in advance!
Some info about this device:
Bluewave's website: Wave 8
Android OS version: 4.4 KitKat
Device processor: Rockchip-based (RK31)
What just happened? It suddenly reboots while I'm playing and gone into recovery mode with an Android and a "No command." message. Now it won't boot the system anymore whenever I reboot, it always going into this recovery mode.
It has no volume buttons, just a reset, a hard back button and power button. Holding down the power and back button goes into the recovery mode directly. Through normal boot, it flashes the Bluewave logo twice then goes into the recovery. While the reset button immediately turn the device off. There's nothing else I can think of that I can do in this case.
My laptop can recognize it as an ADB Device in recovery mode and I think I may be able to flash it via Rockchip BatchTool, but the instructions I've read states that the device should be up and with a USB debugging enabled which I am not currently able to do in recovery mode. Device is rooted and working totally fine until this happened.
Anyone got into this kind of problem and able to go through it? Please, any help is greatly appreciated.
P.S
Just let me know if there are any additional info I could give you.
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
AutomaticSearches said:
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
Click to expand...
Click to collapse
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Humble Potato II said:
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Click to expand...
Click to collapse
May be this site help: http://bluewave-global.com/wave_8.php#frame4
"Long press the power button to restart the device. If restarting fails, hard reset the tablet by poking the Reset hole using a pin. " it is from FAQ
maybe this could help.
1. Press the power button to get the option menu for
Power off
Reboot
Silence phone option.
2. on that menu you have to hold down that power off option on your touch screen while also holding down the home push button on the side of your tablet.
3. This brings up a screen to reboot into safe mode..(these are the 3 steps the company does not tell you that is why no one gets it to work.
4. HIt yes for safe mode and then hold down your power and home buttons on side of tablet till the dopo Logo appears.
5. Release both buttons and hit the power button one time and then hold only the home button down till a menu option appears.
6. Use the home button to move down to factory reset and press the power button to select. Once it says complete then use the power button to select reboot.
Problem solved. Hope this will help everyone out.
The only way is to remove the battery, attached again the battery then power it on their is no hard reset on blue wave the go to settings factory reset
Hi,
this morning I was struggling with this smartphone because of the lack of primary services in the device (e.g. calls, contacts, sms).
I thought about a bug in the OS or...I don't know. So, after trying the easiest things (download some app, disable/install or install other one etc), I decided to factory reset the phone. I searched for instruction on the internet and I found this procedure: power off the device, enter in recovery mode pressing power button + volume up, wipe data to factory reset.
In fact I think I pressed volume down and a screen with android symbol and no option appeared. So, I hold power button to quite this mode and reboot the system, but now the home screen is empty and any functionality disappeared (the phone is unusable).
If now I correctly enter the recovery mode pressing power button + volume up and run "factory reset" the process starts and after a few seconds it crashes and tell me that it can't recovery the system.
So, if I simply boot the system the home screen is empty and I can't use any app or function. And neither I can recovery the system to factory reset.
Pleas help.
mod edit - issue marked as solved by the user
thread closed
Closed at OP's request