Hey Guys,
I'm new here and have an huge problem. I've tried Cyanogenmod on my phone for a couple of months. Today I've tried to flash the stock ROM from Motorola, which was successful. But as I tried to flash another version (which is a later build as the ROM which I've flashed before) of the Stock ROM from Motorola, there was an error. Currently I don't have any system installed and can't flash any ROM because I've locked the Bootloader. I can't unlock the Bootloader because for this I need to have a ROM installed. Every time I try to unlock the Bootloader my phone says "allow oem unlock". The main problem is, that I don't have an Nandroid Backup.. I know this was very very dumb, but I'm new in flashing ROMs to a Smartphone.
Thanks for replies.
I have the Motorola Moto E 2.Generation 4G/LTE
Tobeey said:
Hey Guys,
I'm new here and have an huge problem. I've tried Cyanogenmod on my phone for a couple of months. Today I've tried to flash the stock ROM from Motorola, which was successful. But as I tried to flash another version (which is a later build as the ROM which I've flashed before) of the Stock ROM from Motorola, there was an error. Currently I don't have any system installed and can't flash any ROM because I've locked the Bootloader. I can't unlock the Bootloader because for this I need to have a ROM installed. Every time I try to unlock the Bootloader my phone says "allow oem unlock". The main problem is, that I don't have an Nandroid Backup.. I know this was very very dumb, but I'm new in flashing ROMs to a Smartphone.
Thanks for replies.
I have the Motorola Moto E 2.Generation 4G/LTE
Click to expand...
Click to collapse
What carrier are you using?
Sent from my Virgin Mobile Moto E via CM 13
O2/Telefonica Germany
..
Flash whole image or the 5system image ..
Like
Fastboot flash system (drag the first part) enter
Fastbbot flash system (drag the 2nd ) enter
Like do rest 3 file
Then try
Haven't everybody another idea? The problem is only, that i don't have a ROM or any other system on my Motorola. The bootloader is locked and I can't unlocked them, because i don't can change the developer options.
Tobeey said:
Haven't everybody another idea? The problem is only, that i don't have a ROM or any other system on my Motorola. The bootloader is locked and I can't unlocked them, because i don't can change the developer options.
Click to expand...
Click to collapse
Rsd lite with the stock packages. That's the only way I know of.
Sent from my XT1526 using XDA-Developers mobile app
Related
I did a very very very stupid thing...
Hey,
Hundreds of times I did this with no problem. But when your head is away bad thing can happen.
I flashed RETUS 5.1 stock ROM over my XT1527 Latin American carrier (possibly Movistar Argentina) . Flash failed. As it turns out I completely forgot to UNLOCK BOOTLOADER first. So I get the code and try to unlock, but the damn ALLOW OEM UNLOCK setting is turned off.
So here I am with a dead phone and no way to boot back. I can only go to (stock) recovery buth nothing I do there really makes any difference. So far I've downloaded two Latin American stock ROM images with no success (Preflash validation failed). However I am concerned that even if I find the right ROM, it will not boot either because of the downgraded boot.
Any options, ideas? Im stuck....Thanks in advance!
Different reason but same problem...
Dang that sucks mate.
Rsd lite to get back to working phone
Sent from my XT1526 using XDA-Developers mobile app
dbx2r said:
I did a very very very stupid thing...
Hey,
Hundreds of times I did this with no problem. But when your head is away bad thing can happen.
I flashed RETUS 5.1 stock ROM over my XT1527 Latin American carrier (possibly Movistar Argentina) . Flash failed. As it turns out I completely forgot to UNLOCK BOOTLOADER first. So I get the code and try to unlock, but the damn ALLOW OEM UNLOCK setting is turned off.
So here I am with a dead phone and no way to boot back. I can only go to (stock) recovery buth nothing I do there really makes any difference. So far I've downloaded two Latin American stock ROM images with no success (Preflash validation failed). However I am concerned that even if I find the right ROM, it will not boot either because of the downgraded boot.
Any options, ideas? Im stuck....Thanks in advance!
Click to expand...
Click to collapse
If you can find someone with a working version of your phone, and in recovery push settings.db (I think) to the bricked phone and reboot into bootloader. then try OEM unlock
Or if you can find an official ROM for the device from Motorola, might be able to flash back to stock with the original firmware then try unlocking again.
sandix said:
If you can find someone with a working version of your phone, and in recovery push settings.db (I think) to the bricked phone and reboot into bootloader. then try OEM unlock
Or if you can find an official ROM for the device from Motorola, might be able to flash back to stock with the original firmware then try unlocking again.
Click to expand...
Click to collapse
I CAN get an identical phone to do whatever I wish with it. However the bricked phone has the stock recovery. Can I still push the file in that?
I have tried with several stock roms with no success. I can't seem to be able to get the correcto one. How do I figure out the correct CID and stuff? However my concern is that the correct stock firmware is XT1527_SURNIA_TEFLA-MSTCL_5.0.2_LXI22.50-53.8_cid12_subsidy-MOVSTLA_CFC and will not boot due to the bootloader being already updated to 5.1
same problem here with xt1528...
I've tried the official unlock and it says can't verify. I tried every tutorial to get around that, activated SIM, going on i.mi.com, etc. I even contacted support US, Hong Kong support, and India support and they all gave me the same garbage auto replies.
I've tried unofficial unlock (2 different methods I believe) and none of them worked. I'm losing my mind.
Does anyone know if there's a different or updated method for Kate? Last time I tried to unlock was 2.5 weeks ago
Somewhere along the line of flashing fastboot roms my network started bugging out. It constantly connects and disconnects, and there's no LTE. I don't think I've ever loaded a bad rom so I don't know how this happened but I think I can troubleshoot that if I can at least get a custom recovery on this stupid thing.
Thanks in advance
I had problems at first too.i flashed global beta thru updater on phone.went to dev options then mi unlock status and linked phone to my account.unlocked first try after that.
marcukial said:
I had problems at first too.i flashed global beta thru updater on phone.went to dev options then mi unlock status and linked phone to my account.unlocked first try after that.
Click to expand...
Click to collapse
By Global beta do you mean global dev?
I'll give it another try
I just gave up and used this method: https://forum.xda-developers.com/redmi-note-3/how-to/method-to-flash-twrp-recovery-unlock-t3473294
You might need to flash an older version of MIUI. I think I used 6.11.3 - currently running Resurrection Remix 5.8.0 with Radon Kernel with locked Bootloader without a problem (well, other than the typical Nougat bugs)
Endzeitkind said:
I just gave up and used this method: https://forum.xda-developers.com/redmi-note-3/how-to/method-to-flash-twrp-recovery-unlock-t3473294
You might need to flash an older version of MIUI. I think I used 6.11.3 - currently running Resurrection Remix 5.8.0 with Radon Kernel with locked Bootloader without a problem (well, other than the typical Nougat bugs)
Click to expand...
Click to collapse
I found a 6.11.3 fastboot rom but when going to flash it says it cant find flash_all_except_storage.bat. And I looked that up and apparently it means it's not a fastboot rom, which is false because the other roms ive flashed didnt hvae storage.bat either.
Mi PCsuite also isnt pulling up the phone in recovery mode so that's useless.
Im about to throw this phone in the garbage honestly. Ive tried just about everything.
I tried the method you mentioned about replacing the recovery image but it didnt work at all
EDIT: Found another rom that works with the updater, but it gave me an error saying its an older version of MIUI. seriously this is pretty ridiculous
rasheemo said:
I've tried the official unlock and it says can't verify. I tried every tutorial to get around that, activated SIM, going on i.mi.com, etc. I even contacted support US, Hong Kong support, and India support and they all gave me the same garbage auto replies.
I've tried unofficial unlock (2 different methods I believe) and none of them worked. I'm losing my mind.
Does anyone know if there's a different or updated method for Kate? Last time I tried to unlock was 2.5 weeks ago
Somewhere along the line of flashing fastboot roms my network started bugging out. It constantly connects and disconnects, and there's no LTE. I don't think I've ever loaded a bad rom so I don't know how this happened but I think I can troubleshoot that if I can at least get a custom recovery on this stupid thing.
Thanks in advance
Click to expand...
Click to collapse
follow this thread.
http://xiaomitips.com/guide/unlock-redmi-note-3-bootloader-without-official-permission/
I have unlocked bootloaders of my 2 phones (1 kenzo, 1 kate), in process of unlocking I was getting error while flashing it was giving me the error of "no system storage" (Not remembered whole message).
when that error occurs to me I got stucked on bootloop then I get jumped directly to "step 18" in both device's unlocking.
in the end I was done an additional step which was about to flash recovery through fastboot.
To flash TWRP recovery through fastboot
just execute the below command if you get your unlocked you device bootloader.
"fastboot flash recovery filename.img"
then just get into recovery mode and flash your desired custom rom.
I have follwed same procedure twice and it worked for me, hope so that it'll help you.
Best Of Luck.
https://forum.xda-developers.com/redmi-note-3/how-to/bootloader-unlock-snapdragon-t3530395
follow this.
I have this canadian version of Huawei honor 5x, and I've been scouring to find answers to whether if am i able to flash a custom rom such as cyanogenmod or not. Can anyone please help me out with this; I've already made several post and it get unanswered. Sofar I've managed to unlock the bootloader, flashed twrp, and rooted it. When I tried installing CM 13 from a thread on this site, I always get the "error 7" and I tried deleting the 2nd line in the meta-inf and rezipping the rom and reflashing; results remain the same.
Here's more info on my phone:
Build#: KII-L05C654B330
EMUI 4.0
Hopefully this will answer your question.
You have a slight typo in your thread title, the Canadian version is the GR5.
I have the same phone as you, and am currently running Lineage OS which is the only one so far that the developers have stated they support all variants (except firmware with VOLTE). Even though they support all variants, thus far the zips they provide still have a line where they assert, so you need to edit out those lines in the updater script. But everything works including fingerprint.
Now, I am currently on chatr, so I do not know if LTE is enabled or not as chatr doesn't use LTE, just 3G. But I do have a backup of my ROM in case you need it. My Backup is from the Zoom Mobile version (Rogers subsidiary/MVNO) which means it doesn't have all the Rogers bloatware apps. But same firmware. Also, I did read here that you need to be running recent firmware so your firmware etc is up to date. I trust you ran all the Huawei updates prior?
Have a look at Lineage OS. It's awesome.
Chaos Storm said:
Hopefully this will answer your question.
You have a slight typo in your thread title, the Canadian version is the GR5.
I have the same phone as you, and am currently running Lineage OS which is the only one so far that the developers have stated they support all variants (except firmware with VOLTE). Even though they support all variants, thus far the zips they provide still have a line where they assert, so you need to edit out those lines in the updater script. But everything works including fingerprint.
Now, I am currently on chatr, so I do not know if LTE is enabled or not as chatr doesn't use LTE, just 3G. But I do have a backup of my ROM in case you need it. My Backup is from the Zoom Mobile version (Rogers subsidiary/MVNO) which means it doesn't have all the Rogers bloatware apps. But same firmware. Also, I did read here that you need to be running recent firmware so your firmware etc is up to date. I trust you ran all the Huawei updates prior?
Have a look at Lineage OS. It's awesome.
Click to expand...
Click to collapse
Hai bud , he mentioned that he is on emui 4 . So we have necessary proof that he is on marshmallow which we require to flash a rom on 5x:highfive:
And after thinking for a while , the last version (latest updates) have modem issues so custom roms may have stopped working for u due to this. I have solutions for u .
Hi Chaos Storm!
I'm fellow Canadian and just got GR5 on kijiji for my daughter.
Just couple quick questions: what ROM do you have now? (i.e. which one you recommend?)
Are there any tricks to flash? I'm having issue now - unlocked bootloader, flashed TWRP, SU. But when I try to boot into TWRP I get stock recovery. Can boot into TWRP only from TWRP app or ADB command...
Then I tried to flash LinOS 14 but got Error 7...
Thanks in advance!!!
Chaos Storm said:
Hopefully this will answer your question.
You have a slight typo in your thread title, the Canadian version is the GR5.
I have the same phone as you, and am currently running Lineage OS which is the only one so far that the developers have stated they support all variants (except firmware with VOLTE). Even though they support all variants, thus far the zips they provide still have a line where they assert, so you need to edit out those lines in the updater script. But everything works including fingerprint.
Now, I am currently on chatr, so I do not know if LTE is enabled or not as chatr doesn't use LTE, just 3G. But I do have a backup of my ROM in case you need it. My Backup is from the Zoom Mobile version (Rogers subsidiary/MVNO) which means it doesn't have all the Rogers bloatware apps. But same firmware. Also, I did read here that you need to be running recent firmware so your firmware etc is up to date. I trust you ran all the Huawei updates prior?
Have a look at Lineage OS. It's awesome.
Click to expand...
Click to collapse
Goldenmeadow said:
Hi Chaos Storm!
I'm fellow Canadian and just got GR5 on kijiji for my daughter.
Just couple quick questions: what ROM do you have now? (i.e. which one you recommend?)
Are there any tricks to flash? I'm having issue now - unlocked bootloader, flashed TWRP, SU. But when I try to boot into TWRP I get stock recovery. Can boot into TWRP only from TWRP app or ADB command...
Then I tried to flash LinOS 14 but got Error 7...
Thanks in advance!!!
Click to expand...
Click to collapse
Not sure what happened there. When you unlocked the bootloader did you reboot at least once to allow it to reset all data? I've had issues before if I unlock a bootloader then immediately flash something.
I know TWRP should ask you if you want to prevent stock recovery from being restored when you exit, always say yes. (It should only ask once)
Did you edit the updater-script in the Lineage install zip? You need to remove the first line or two where it says: "assert device" or something like that.
If all else fails, boot the phone into fastboot, flash twrp again, and make sure you "fastboot reboot recovery" so the unit doesn't have a chance to try and restore the factory recovery. Then try flashing your rom again.
Thanks for reply! With the help of fellow members I figured it out - I was holding POWER button TOO LONG And if that happens, phone goes into built in recovery... You suppose to let button go once you see first splash screen.
So it's all good!
Thanks!!!
Chaos Storm said:
Not sure what happened there. When you unlocked the bootloader did you reboot at least once to allow it to reset all data? I've had issues before if I unlock a bootloader then immediately flash something.
I know TWRP should ask you if you want to prevent stock recovery from being restored when you exit, always say yes. (It should only ask once)
Did you edit the updater-script in the Lineage install zip? You need to remove the first line or two where it says: "assert device" or something like that.
If all else fails, boot the phone into fastboot, flash twrp again, and make sure you "fastboot reboot recovery" so the unit doesn't have a chance to try and restore the factory recovery. Then try flashing your rom again.
Click to expand...
Click to collapse
Chaos Storm said:
Hopefully this will answer your question.
You have a slight typo in your thread title, the Canadian version is the GR5.
I have the same phone as you, and am currently running Lineage OS which is the only one so far that the developers have stated they support all variants (except firmware with VOLTE). Even though they support all variants, thus far the zips they provide still have a line where they assert, so you need to edit out those lines in the updater script. But everything works including fingerprint.
Now, I am currently on chatr, so I do not know if LTE is enabled or not as chatr doesn't use LTE, just 3G. But I do have a backup of my ROM in case you need it. My Backup is from the Zoom Mobile version (Rogers subsidiary/MVNO) which means it doesn't have all the Rogers bloatware apps. But same firmware. Also, I did read here that you need to be running recent firmware so your firmware etc is up to date. I trust you ran all the Huawei updates prior?
Have a look at Lineage OS. It's awesome.
Click to expand...
Click to collapse
Would I be able to get a copy of your ROM? I am with Cityfone (Rogers subsidiary), and am looking to network unlock, I can't seem to find my backup from when I started flashing custom ROMs
kenneth_82614 said:
Would I be able to get a copy of your ROM? I am with Cityfone (Rogers subsidiary), and am looking to network unlock, I can't seem to find my backup from when I started flashing custom ROMs
Click to expand...
Click to collapse
I will have a look. As things would be, I also need to restore my GR5 so I'll find it for both of us.
Hi everyone, im new to XDA. But that's kinda beside the point.
I have a Redmi Note 3 with Snapdragon 650 and 2gb ram 16gb storage. I wanted to install lineage os/R.remix because im kinda bored of miui and wanted nougat. I did the following steps to install.
1. Unlocked bootloader via no-permission or hack method.
2. Installed TWRP latest as of 10-6-2017 thru Fastboot.
3. Wiped cache,dalvik and data
4. Flashed R.Remix nightly 10-6-17 and then Gapps.
In this step, I had a problem. It was giving me error:7 (xiaomi.verify.modem) and so I modded the rom (updater-script) and worked. It had the animation loop soflashed NON-HLOS modem binary thru Fastboot and flashed the original signed ROM. But, the problem persists. It's stuck in the boot animation and looping infinitely. I left it for 30min-1hr and still loops. What do I do now? Please help me in this regard. Till then, MIUI again
bro you forgot to flash lazy flasher at first boot in rom after installing twrp.
dean [email protected]# said:
bro you forgot to flash lazy flasher at first boot in rom after installing twrp.
Click to expand...
Click to collapse
There's no need of lazyflasher on a custom Rom!
Do you want to know something else about what I did to solve the problem? Although I rolled back to miui bcos I needed my phone:good:
U need to update ur firmware. Download it from below link & follow the below steps.
https://www.androidfilehost.com/?fid=817550096634767927
Wipe system, Data, cache, Dalvik cache
Install above firmware
Install Custom Rom of ur choice
Enjoy
Let me know if it doesn't works
ExtGame said:
Hi everyone, im new to XDA. But that's kinda beside the point.
I have a Redmi Note 3 with Snapdragon 650 and 2gb ram 16gb storage. I wanted to install lineage os/R.remix because im kinda bored of miui and wanted nougat. I did the following steps to install.
1. Unlocked bootloader via no-permission or hack method.
2. Installed TWRP latest as of 10-6-2017 thru Fastboot.
3. Wiped cache,dalvik and data
4. Flashed R.Remix nightly 10-6-17 and then Gapps.
In this step, I had a problem. It was giving me error:7 (xiaomi.verify.modem) and so I modded the rom (updater-script) and worked. It had the animation loop soflashed NON-HLOS modem binary thru Fastboot and flashed the original signed ROM. But, the problem persists. It's stuck in the boot animation and looping infinitely. I left it for 30min-1hr and still loops. What do I do now? Please help me in this regard. Till then, MIUI again
Click to expand...
Click to collapse
Don't flash that miui firmware from post above, it will relock your bootloader because you are not officially unlocked.
Best way to go is to flash latest global dev fastboot rom, unlock officially. This way you will have no problems with flashing nougat custom roms.
So, should I install the latest global developer rom? I checked yesterday it was v7.6.7 while latest global stable was 8.2.4 which I have currently installed. I also checked via fastboot OEM device-info and, yeah, bootloader locked.:crying: So, I should install the dev. Rom and ask for permission and then unlock, like, the official way? I'm waiting for the reply. Make it clear and I'll try it. Thnx.
Edit : I also somehow got TWRP uninstalled:crying::crying: I don't know if this unexpected or was doomed to happen but yeah, again, just saying.
I just asked for permissions to unlock and..... Surprise!!! I got the permission in 5 minutes!!!
I feel kinda sad for the people who are waiting for more than 21 days...
Capt. John Yossarian said:
Don't flash that miui firmware from post above, it will relock your bootloader because you are not officially unlocked.
Best way to go is to flash latest global dev fastboot rom, unlock officially. This way you will have no problems with flashing nougat custom roms.
Click to expand...
Click to collapse
Okee, doin' it. I'll inform you later abt how its hapenning.
Good luck to me
ExtGame said:
Okee, doin' it. I'll inform you later abt how its hapenning.
Good luck to me
Click to expand...
Click to collapse
Good luck.
https://www.digitbin.com/unlock-bootloader-xiaomi/
https://www.howtogeek.com/240047/how-to-flash-twrp-recovery-on-your-android-phone/
https://forum.xda-developers.com/showthread.php?t=2317790
OMG OMG OMG IM TRIGGERED WHAT IS THIS??????!!!!!!!!!!!!!!
*calms down*
This MI Flash gets stuck at 99% even tho I got permissions (an SMS from MI) and shows current account not bound to device. What do I do? I also tried binding my account to phone by settings-->dev. options-->mi unlock which gave code 86012 and some Chinese characters which I honestly can't understand. I also tried installing global dev and doing the same thing but gives same 86012 and Chinese. Plzz help me in this regard. Would be greatly appreciated. Thanks.
Actually, nvm. I got lineage is installed and running on my phone by following a guide on how to install twrp without unlocking bootloader. Worked like a charm for me. I'm typing this now on lineage:silly: Anyways, thanks for the effort. Thread closed.
You could've just waited for 7 days and you would've unlocked your bootloader officially
how did it go buddy ?
ExtGame said:
Okee, doin' it. I'll inform you later abt how its hapenning.
Good luck to medid you falsh the custom rom , does it work cause i get stuck on bootanimation too
Click to expand...
Click to collapse
I am using it thru locked bootloader mrthod
ExtGame said:
OMG OMG OMG IM TRIGGERED WHAT IS THIS??????!!!!!!!!!!!!!!
*calms down*
This MI Flash gets stuck at 99% even tho I got permissions (an SMS from MI) and shows current account not bound to device. What do I do? I also tried binding my account to phone by settings-->dev. options-->mi unlock which gave code 86012 and some Chinese characters which I honestly can't understand. I also tried installing global dev and doing the same thing but gives same 86012 and Chinese. Plzz help me in this regard. Would be greatly appreciated. Thanks.
Click to expand...
Click to collapse
Same here please help
You can follow the tutorial on how to install lineage os with locked bootloader on redmi note 3. Works like a charm, i am using lineage os 14.1 with locked b.loader!!:good:
recommend you to wait for 5-7 days and unlock it officially...
So that you would never face problems in future.
Hello everyone, I and my father have the exact same phone (kenzo). The problem is that even though on mine everything works like a charm and I have changed a lot of roms, my father's phone every time I try anything goes soft bricked or have problems with signal and settings. Currently I have flashed via edl the Chinese Dev rom(5.1.1) with which everything works, besides the restrictions of the rom version(language, gapps). I must say that when I first install the Chinese Dev the Sim is not recognised or I have no signal. After the first update everything is ok and calling function works like a charm. After That I try to install twrp (zxc by ~xm) and restore a backup from the previous working installation, but the only I get is settings app fc and problems with calls. Neither of the two sides hear the other while in call. This occurred when I flashed a mm bootloader zip in order to boot to nitrogen is. (https://drive.google.com/file/d/0B3tM1cVKiyp6Q3RvNUtLdEp1Q3M/view ) The rom booted but I had no sound in calling, and the other side couldn't hear either. Any ideas?
Thanks for your time!
Aristalex said:
Hello everyone, I and my father have the exact same phone (kenzo). The problem is that even though on mine everything works like a charm and I have changed a lot of roms, my father's phone every time I try anything goes soft bricked or have problems with signal and settings. Currently I have flashed via edl the Chinese Dev rom(5.1.1) with which everything works, besides the restrictions of the rom version(language, gapps). I must say that when I first install the Chinese Dev the Sim is not recognised or I have no signal. After the first update everything is ok and calling function works like a charm. After That I try to install twrp (zxc by ~xm) and restore a backup from the previous working installation, but the only I get is settings app fc and problems with calls. Neither of the two sides hear the other while in call. This occurred when I flashed a mm bootloader zip in order to boot to nitrogen is. (https://drive.google.com/file/d/0B3tM1cVKiyp6Q3RvNUtLdEp1Q3M/view ) The rom booted but I had no sound in calling, and the other side couldn't hear either. Any ideas?
Thanks for your time!
Click to expand...
Click to collapse
Is ur device bootloader is unlocked ?
If yes then by which method u had unlocked by unofficial way or by official way?
Criston said:
Is ur device bootloader is unlocked ?
If yes then by which method u had unlocked by unofficial way or by official way?
Click to expand...
Click to collapse
I used to unlock it the official way. I found a post in the nitrogenOS thread that said that if the rom doesn't boot I should flash the zip that I have mentioned in my post. They said it was the mm bootloader. The zip contains a file named emmc_appsboot.mbn which is also on the unofficial unlock zip. So I suppose I unlocked it unofficially. I must say that every time after flashing fastboot rom the mi unlock said that bootloader was already unlocked.
Aristalex said:
I used to unlock it the official way. I found a post in the nitrogenOS thread that said that if the rom doesn't boot I should flash the zip that I have mentioned in my post. They said it was the mm bootloader. The zip contains a file named emmc_appsboot.mbn which is also on the unofficial unlock zip. So I suppose I unlocked it unofficially. I must say that every time after flashing fastboot rom the mi unlock said that bootloader was already unlocked.
Click to expand...
Click to collapse
U should unlock using the official way if u dont want to face any problem
And also if wanna Flash any custom rom first clean Flash miui using Mi flash tool and google how to Flash custom rom on kenzo
make sure u have backup of all ur files
Criston said:
U should unlock using the official way if u dont want to face any problem
And also if wanna Flash any custom rom first clean Flash miui using Mi flash tool and google how to Flash custom rom on kenzo
make sure u have backup of all ur files
Click to expand...
Click to collapse
Yes yes I know that with my kenzo everything works if I follow your advice. But with my father's one simply doesn't. I flashed the official miui with mi flash tool. The bootloader remained unlocked without reason. Also I tried clean flash and lock option on the tool without success. Then I wiped data and dalvik and cache and dirty flashed a miui custom rom over it. For the time being everything works perfectly except of the fingerprint sensor. Aida 64 recognize the fp, every other app not. Also I flashed radon kernel because I had settings app FC. That's all. I hope the info help you understand the situation that I am in, and find a way to make it respond as mine...
Mine and the other are exactly the same, they even had the same number on the sticker in the back and same fingerprint sensor. Mine takes every rom, unlock update without problems. My father's not. It is crazy...