I tried to install droidwin on galaxy grand quattro, It turned out wrong I cannot start my phone to home screen
It goes on loading in the bootscreen.
(Here boot animation is 4 large dots red blue green and some other color.)
Please help me to solve problem.
First I flashed rom,then rebooted it was good back then,then installed the package file and update file.
Then It began,
I used philz recovery from rashr.
Now can I enter into recovery mode?
Edit: I accessed cwm recovery.wiped data,Cache,delvik,factory reset and INSTALLED DROIDWIN AGAIN ,still it is showing infinite boot animation.
Thanks in advance
Try installing cwm through Odin. Hopefully it will solve it.
Focus16 said:
I tried to install droidwin on galaxy grand quattro, It turned out wrong I cannot start my phone to home screen
It goes on loading in the bootscreen.
(Here boot animation is 4 large dots red blue green and some other color.)
Please help me to solve problem.
First I flashed rom,then rebooted it was good back then,then installed the package file and update file.
Then It began,
I used philz recovery from rashr.
Now can I enter into recovery mode?
Edit: I accessed cwm recovery.wiped data,Cache,delvik,factory reset and INSTALLED DROIDWIN AGAIN ,still it is showing infinite boot animation.
Thanks in advance
Click to expand...
Click to collapse
Return to stock before flashing custom roms
Related
Hi all,
Today I wiped all data and cache from my device and installed VillainROM from CWM Recovery Manager. Install looked fine it said that it finished, so I went to reboot.
The device was stuck on the Samsung Galaxy S II logo with the yellow triangle (!) for around 10 minutes. I then turned it off cause I realized it wasn't going to boot.
Anyone have any idea why this happened? I restored a backup of my previous ROM and my phone booted up real fast and it was fine.
Could just be a bad download?
Sent from my GT-I9100 using XDA App
Try flash it again before it boots. IE: Flash from zip, then go back and falsh from zip again.
I've had to do that with CM...
OK will try that, cause the same thing happened to me when I installed Cyanogenmod straight from Rom Manager. Thx
Update: No go, I also made sure Deluxe Settings was uninstalled before I went into recovery. It's stuck at the boot screen.
However, upgrading my previous ROM (WanamLite v4.0) to WanamLite 5.2 worked fine and the device booted. It was exactly the same procedure in recovery mode but a different ZIP file.
Will try another ROM like LiteningRom and see if anything changes. I don't think it's a CRC error because I open up the files before I copy to the device to see if WinRAR pops any CRC errors.
I'd start on the thread a few up from yours.... the one that mentions if you have a boot loop
Sorry, I didn't realize it was a boot loop because it wasn't actually looping, just stuck on the image. Is that considered a boot loop?
From this thread. http://forum.xda-developers.com/showthread.php?t=2179849
I installed a custom sound pack without awareness if it will work with my PACman Rom and then I flashed it back with his stock and here goes my boot animation screen gone dark.
But the main point is I tried to install custom boot animation with CWM recovery but it's appear to be failed so I installed it via Boot Animation Root app, it says installed but when I do a reboot it still stay the same black screen. I've tried many custom boot in it download page but non of them worked.
Am I missing anything? Please help, Thanks
I'm not very good at English. Sorry for my poor language use.:silly:
Hey guys,
I flashed GlamourROM for Android 4.3 yesterday. It was working perfectly, so I decided to delete an old backup from recovery. I have ClockworkMod v6.0.4 running on the phone. The phone was rebooting perfectly prior to this, so I didn't see any reason to worry when I rebooted it into recovery. This is when the problem started.
The phone shows the Samsung S3 splash screen, displays the Clockwork hat logo for a split second (black background, not even the usual greyish) and then bootloops (times infinity).
I tried cold reboot, hard reboot and every other trip I could think of. The phone does go into download mode, so that's still there. Any help is welcome ... I'm really worried about this.
Flash another recovery via odin.
Sent from my GT-I9300 using Tapatalk
Hey, I flashed the stock firmware (that I downloaded from sammobile) and it passed! But this was a short-lived relief, because now its stuck in the logo bootloop - without the clockwork mod logo, so a small win there, I guess!
Now what?
discoguru said:
Hey, I flashed the stock firmware (that I downloaded from sammobile) and it passed! But this was a short-lived relief, because now its stuck in the logo bootloop - without the clockwork mod logo, so a small win there, I guess!
Now what?
Click to expand...
Click to collapse
SEARCH read the faqs and guides .
Format via recovery sdcard system data cache .
Boot to download mode flash stock rom via Odin .
I had to restart my phone for some reason and on restarting, the phone got stuck in a boot-loop ( Samsung galaxy S3 i9300 ) text logo. I thought I'd reboot into CWM (Philz touch) and wipe to make things better. But the phone won't boot into CWM either, it showed the soft navigation keys and rebooted again, and kept running in a bootloop of trying to get into the recovery and restarting again.
So I tried to ODIN the recovery just to refresh if something is broken. It didnt work. Odin was success but the boot into recovery wasn't. I tried several times but no luck.
Then I flashed TWRP using ODIN, and voilah! i could boot into TWRP . I flashed CWM using TWRP and voilah again, i could reboot into CWM again . After thatI had to flash the ROM again though.
I do not know why it happened, but I thought I'd share the details just in case someone tries to google it.
salimbaba said:
I had to restart my phone for some reason and on restarting, the phone got stuck in a boot-loop ( Samsung galaxy S3 i9300 ) text logo. I thought I'd reboot into CWM (Philz touch) and wipe to make things better. But the phone won't boot into CWM either, it showed the soft navigation keys and rebooted again, and kept running in a bootloop of trying to get into the recovery and restarting again.
So I tried to ODIN the recovery just to refresh if something is broken. It didnt work. Odin was success but the boot into recovery wasn't. I tried several times but no luck.
Then I flashed TWRP using ODIN, and voilah! i could boot into TWRP . I flashed CWM using TWRP and voilah again, i could reboot into CWM again . After thatI had to flash the ROM again though.
I do not know why it happened, but I thought I'd share the details just in case someone tries to google it.
Click to expand...
Click to collapse
You have to remember what exactly you have done before rebooting. Some times it happened with me mainly changing boot screen, battery screen etc.
im on stock root and i wanted to hopefully flash a rom, but first i needed a custom recovery. On my phone, i downloaded Rom manager and it asked me to install cwm. it found my device and it downloaded and said installed successfully. i rebooted into recovery and from there it loops and boots into recovery non stop. i remove the battery and put it back in and it still tries to boot into recovery with the loop. (Semi-fix) when i remove my battery and boot into download mode. i can cancel it and it will skip trying to boot into recovery and load just fine. i can then shut down or restart as needed. but booting back into recovery will start the issue over again. i just want to know a safe way to have cwm on my note 3, or how to revert it back to normal. any help please?
scarface195894 said:
im on stock root and i wanted to hopefully flash a rom, but first i needed a custom recovery. On my phone, i downloaded Rom manager and it asked me to install cwm. it found my device and it downloaded and said installed successfully. i rebooted into recovery and from there it loops and boots into recovery non stop. i remove the battery and put it back in and it still tries to boot into recovery with the loop. (Semi-fix) when i remove my battery and boot into download mode. i can cancel it and it will skip trying to boot into recovery and load just fine. i can then shut down or restart as needed. but booting back into recovery will start the issue over again. i just want to know a safe way to have cwm on my note 3, or how to revert it back to normal. any help please?
Click to expand...
Click to collapse
Pull battery let it sit for two minutes. Push menu button, volume down button, and power button at the same time boot into download mode. once there flash a fresh copy of your OS which ever version of KitKat your running. You lose all your personal data, but your beyond that now. Then here is link to my thread should answer all your questions http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 enjoy !!!
uknow said:
Yeah ive said it a few times this should not be used
If youve bricked your phone you can get back into your phone by holding volume down menu botton and power botton at the same time when it pops up the warning screen to enter download mode hit cancel your phone will then boot up after your phone is on if you do not have a computer the way you fix the phone so you dont have to do this every time your phone is off you need mobile odin and a kitkat cwm.img.tar for our phone flash it and problem solved you can now boot into cwm recovery then if you want you can flash a twrp img zip through cwm or just keep cwm hope this helps
Ps if you Google mobile odin the dev gives it away on his xda mobile odin page
Click to expand...
Click to collapse
.............^^^^^^...........
stuck in recovery loop also
hi i am new to all this..i managed to get my sprint note 3 4.4.4 NK4 rooted and i read that i also needed a custom recovery so i used odin to install "philz_touch_6.08.7-hltespr.tar.md5" and it said success but when i tried to get into it it just says recovery is not seandroid enforcing i also used rom manager to get into it automatically but it just keeps looping saying same thing. is there a way out of this mess?
update-- i found an updated version of the philz tar file and installed it with odin and that got me out of the loop..just havent tried to get back into recovery yet...lol
Cat1970 said:
hi i am new to all this..i managed to get my sprint note 3 4.4.4 NK4 rooted and i read that i also needed a custom recovery so i used odin to install "philz_touch_6.08.7-hltespr.tar.md5" and it said success but when i tried to get into it it just says recovery is not seandroid enforcing i also used rom manager to get into it automatically but it just keeps looping saying same thing. is there a way out of this mess?
Click to expand...
Click to collapse
First, pull the battery for a minute then reinstall hold the power, menu, and volume down buttons at the same time and boot into download mode. The version of Phil'z CWM you flashed is to old for 4.4.4 NK4. Now download to your desktop the right Philz CWM recovery file (Phil'z_Touch_6.48.4-hlte.tar.md5 ) here is the link https://goo.im/devs/philz_touch/CWM_Advanced_Edition/hlte/ there are two listed use the second one. Flash with odin and you should be good to go. Go to my thread http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 for more info.
done exactly as you said and the same screen came up saying recovery is not seandroid enforcing and then it jumps to Philz Touch 6 so im assuming everything is right now...i really appreciate the help! tyvm
different rom
ok..i installed cyanogen rom..i also used titanium backup..i want to go back to where i was but i dont see titanium backup on there anymore..how do i revert back?
i guess i need to update my phone n900p (help)
my rooted note 3 was running 5.0 L so i tried flashing a custom recovery both TWR and CWM now its stuck in boot loop. i read all the post showing you how to get out the bootloop. how ever i still need to put a recovery on my phone are there any updated links for this with odin because i was using the odin 3.0 sorry odin 307