Hello,
Out of options here guys/gals, need your helpz.
G925f, Tried encrypting this morning, it failed.
Upon reboot message: Device Encryption failed(only option to press reset).
upon pressing reset, it starts over goers into twrp and bootloops into the same message.
I had no roms on internal storage so i can load a new one in.
I cannot access adb says i am either offline or device won't show.
any ideas on how to get out of this one?
Can odin see it? If so u could use that to flash back to stock, or u could try smart switch
yup, i can see it in odin, i will try smart switch now too!
Related
LG Escape running 4.1.2
here is the progression of events:
1. rooted device
2. root seemed successful and no malfunctions
3. backed up all apps and system data with Titanium backup
4. the lg escape has no way to unlock the bootloader, so I tried various other methods. one of which was entering recovery mode via terminal commands. this is basically a hard reset, and it wiped all my data
5. I restored all my apps and data from my external sd card with titanium
My best guess is this is where something went wrong
6. upon restoration it prompted me to reboot the device
7. reboot passes manufacturer logo, but resets when AT$T logo appears
8. as stated earlier, there is no way to enter recovery mode during boot.
9. there is a hard reset during boot, but mine will not work, as it requires touching buttons which do not seem to be active in my stage of the boot sequence
so, I understand this does NOT mean my phone is bricked, but I don't know how else to get it to boot back up, or what is even causing the boot loop, as I DO NOT HAVE ANY CUSTOM ROMS flashed. any help here is very appreciated!
EDIT: so I have attempted to use adb on my pc to reboot into recovery from there, but it occurred to me that while I was in recovery the first time, I never checked "usb debugging". as a result my adb console commands cant even see my device. any way to turn on usb debugging while locked in a boot loop?
also, I can get it to enter download mode. I was hoping I could just reflash the firmware to it without needing to enable usb debugging, but have no clue how to do that while locked out of the phone.
I realize this is a very specialized set of questions, but it is necessary to ask here as the most people will see it. im open to any ideas
whitechameleon said:
LG Escape running 4.1.2
here is the progression of events:
1. rooted device
2. root seemed successful and no malfunctions
3. backed up all apps and system data with Titanium backup
4. the lg escape has no way to unlock the bootloader, so I tried various other methods. one of which was entering recovery mode via terminal commands. this is basically a hard reset, and it wiped all my data
5. I restored all my apps and data from my external sd card with titanium
My best guess is this is where something went wrong
6. upon restoration it prompted me to reboot the device
7. reboot passes manufacturer logo, but resets when AT$T logo appears
8. as stated earlier, there is no way to enter recovery mode during boot.
9. there is a hard reset during boot, but mine will not work, as it requires touching buttons which do not seem to be active in my stage of the boot sequence
so, I understand this does NOT mean my phone is bricked, but I don't know how else to get it to boot back up, or what is even causing the boot loop, as I DO NOT HAVE ANY CUSTOM ROMS flashed. any help here is very appreciated!
EDIT: so I have attempted to use adb on my pc to reboot into recovery from there, but it occurred to me that while I was in recovery the first time, I never checked "usb debugging". as a result my adb console commands cant even see my device. any way to turn on usb debugging while locked in a boot loop?
also, I can get it to enter download mode. I was hoping I could just reflash the firmware to it without needing to enable usb debugging, but have no clue how to do that while locked out of the phone.
I realize this is a very specialized set of questions, but it is necessary to ask here as the most people will see it. im open to any ideas
Click to expand...
Click to collapse
i have now tried to flash the firmware while in download mode using a less than legitimately obtained lg R&D tool. however, i need V10F_00.kdz and i am facing a bit of censorship. any kind soul willing to host this file on dropbox or similar so i can download it?
Usually devices have a button combination to press when powering on to get into different modes. Maybe try searching for the button combination of your phone on Google? Try ' lg escape button recovery ' ?
J2270A said:
Usually devices have a button combination to press when powering on to get into different modes. Maybe try searching for the button combination of your phone on Google? Try ' lg escape button recovery ' ?
Click to expand...
Click to collapse
believe me i have. the only combo i can get to is download mode. there is a combo for a hard reset, but my touch buttons arent active during boot.
The phone was working fine until the battery was empty. I tried to charge it and turn it on, but it's stuck at the Samsung logo splash screen. Holding the power button only restarts the device, so to turn it off I'll have to take the battery out. I don't know how to fix this, and if a factory reset is the only option, I need to backup my data first which I currently don't know how to either (without accessing the OS).
I've got to the Android System Recovery 3e menu and tried clearing cache, which did not help. The option to do a factory reset is also there, but I need to backup my data first, and I don't even know if this will fix the problem.
I'm also able to enter download mode.
When connected to my PC it detects an unknown device named 'samsung_android", and it shows up in adb. I've tried doing a backup through adb, but it wanted me to unlock the screen to accept the backup, which I could not, because I'm stuck at the splash screen.
Is there anything I can do to save my data? Anything through adb? Install root (never done this before)?
dinho10r said:
The phone was working fine until the battery was empty. I tried to charge it and turn it on, but it's stuck at the Samsung logo splash screen. Holding the power button only restarts the device, so to turn it off I'll have to take the battery out. I don't know how to fix this, and if a factory reset is the only option, I need to backup my data first which I currently don't know how to either (without accessing the OS).
I've got to the Android System Recovery 3e menu and tried clearing cache, which did not help. The option to do a factory reset is also there, but I need to backup my data first, and I don't even know if this will fix the problem.
I'm also able to enter download mode.
When connected to my PC it detects an unknown device named 'samsung_android", and it shows up in adb. I've tried doing a backup through adb, but it wanted me to unlock the screen to accept the backup, which I could not, because I'm stuck at the splash screen.
Is there anything I can do to save my data? Anything through adb? Install root (never done this before)?
Click to expand...
Click to collapse
Hey mate, can you get into the recovery mode? Try flashing the TWRP recovery and boot by pressing power button + home button + volume up and find an option to mount your USB storage via USB cable and see if your phone's folder tree is available from the Windows Explorer and hopefully you can backup your data by then. Just make sure you have all the drivers ready.
Hope that helps.
cglegion said:
Hey mate, can you get into the recovery mode? Try flashing the TWRP recovery and boot by pressing power button + home button + volume up and find an option to mount your USB storage via USB cable and see if your phone's folder tree is available from the Windows Explorer and hopefully you can backup your data by then. Just make sure you have all the drivers ready.
Hope that helps.
Click to expand...
Click to collapse
Yeah, I can get into recovery mode. But how do I get the TWRP to my phone? Do I have to put it on my external memory card and then load it from there?
And I could only find it for a S2 Exhilarate SGH-i577 device. Does it matter if my phone is a S2 GT-I9100?
I've never rooted my phone earlier. Is a root necessary to flash a ROM?
dinho10r said:
Yeah, I can get into recovery mode. But how do I get the TWRP to my phone? Do I have to put it on my external memory card and then load it from there?
And I could only find it for a S2 Exhilarate SGH-i577 device. Does it matter if my phone is a S2 GT-I9100?
I've never rooted my phone earlier. Is a root necessary to flash a ROM?
Click to expand...
Click to collapse
Correct. Put the TWRP zip on your external and flash it normally via recovery mode such as CWM not the android 3e recovery. Or find an odin flashable zip for yoyr device.
I am very sure there is one for I9100 because I ran into the exact same problem before and managed to figure it out. You just have to search for it can't give you a link because I'm on mobile now.
You need to root your phone in order to install a new recovery such as TWRP/CWM or even flash new kernel and ROM.
Good luck.
Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls
Hi there,
I am at a loss.
Zemana antivirus asked if I wanted to make SELinuxModeChanger a system app. I agreed.
Well, later on I realized that I didn't need that app anymore, so I tried to delete it via ES File Manager. Failed, but some files of the app became deleted anyway.
There was no problem till I restarted my phone. It boots the phone's logo then it stuck.
Safe mode doesn't work. Factory reset doesn't work.
I connected my phone to PC, but the computer doesn't see my phone.
Power and volume up held down power let of when logo boots. Power down again.
Phone writes "No command" -- I guess that's the chance when I should give it a command, but how and what?
Then press Power:
Menu
update from sd
update from adb
wipe/factory reset
restore user recovery
wipe catch
None of them work.
Phone created many recovery data... Each of them is useless.
Android 4.4.2 phone Navon D402 rooted with King Root.
Any suggestions?
You are my last and only hope.
Thanks in advance!
Hi All
I have samsung A5 2017. When i start my phone it shows no command and it continues to restart after 1 minute.
When i try to open recovery mode i get error "fail to open recovery_cause(No such file or directory)". I have also tried combination of key power and volume up but not getting recovery mode. I think it has been deleted or something else. I am also unable to load firmware.
I also tried to install twrp with odin 3.13 but get error unable to install frp locked.
Please tell me solution how can i get back recovery mode so that i can install firmware.
Please help me for this.
Hey there,
I have a similar issue and I can see your post dates back to 2020. Have you ever found a way?
I'm very curious about solving the issue on mine (I can't reboot at all, can't even access the reboot after getting the "no command" message. If you have any clue on how you accessed reboot mode and can be kind enough to share, this would be really appreciated )
I know this is an old thread, but did you find a solution?
On an unlocked J6, after flashing the stock rom, although I can open recovery, I get the same message. The options I tried (both reboot options, both wipe options, power off) work. I went ahead and installed twrp through odin, which passed, but when I boot into recovery, it boots into samsung recovery (with the same message) and not twrp.
I'm guessing the twrp problem is related to the error message.