Hi
I have a really weird problem: i have brand new Oneplus One with CM11s , my mobile gets 3g signal more or less but it cannot find the 2g signal .In my area there is full 2g reception.I flashed many roms,modem firmwares,unblocked the bands supported but nı success.I played around nv items on qpst and i got the 2g signal then 3g and data was gone.I am sure my problem is related with nv items yet i dont know how to do it.I will be very greatful if you can help me.Thanks in advance.
Hi all!
Im using a moto E with Tata Docomo sim.
The problem is that when I change my network mode to WCDMA only, the phone shows only 3G and not H+. However, when I go out of my home, I get H+ with full signal.
I've talked to customer care and the issue is that another cell tower which doesnt support HSPA is stronger in my home so the phone connects to it and only shows 3G even when data transfer takes place. 3G is so much slower than HSPA/HSPAP.
Is there any way I can force my phone to connect to HSPA/HSDPA only?? I dont mind if the signal drops a little. Since it is possible to force the phone to using 3G only, I thought forcing to 3.5G could also be done
Also my phone is rooted so changing any system file is not a problem.
Please help..
Thank you.
Hello to all.
I have some data issues with my Z2.
I'm on t-mobile HR (croatia).
So, if the phone is set to preffer LTE data network and when I leave WiFi network the phone can't connect to data network, if there is no LTE network. Than I must set the phone to preffer 3G, phone connects to 3G or 3G+, and than to 4G when I set it to preffer 4G again.
When the phone is set to preffer 3G than if I leave WiFi the phone immediately switch to 3G.
In both casses, after the data network is found (3G, 3G+) and I set the phone to preffer the LTE phone switch to 4G.
I foud this problem since the phone is updated to 4.4.4 Kitkat and now I'm on 5.1.1. Lollipop (.264 version) and the problem still persist.
Please help me to solve it because it's really annoying.
And yes, the whole area is covered with 4G signal, but sometimes is weak.
Zoran81 said:
Hello to all.
I have some data issues with my Z2.
I'm on t-mobile HR (croatia).
So, if the phone is set to preffer LTE data network and when I leave WiFi network the phone can't connect to data network, if there is no LTE network. Than I must set the phone to preffer 3G, phone connects to 3G or 3G+, and than to 4G when I set it to preffer 4G again.
When the phone is set to preffer 3G than if I leave WiFi the phone immediately switch to 3G.
In both casses, after the data network is found (3G, 3G+) and I set the phone to preffer the LTE phone switch to 4G.
I foud this problem since the phone is updated to 4.4.4 Kitkat and now I'm on 5.1.1. Lollipop (.264 version) and the problem still persist.
Please help me to solve it because it's really annoying.
And yes, the whole area is covered with 4G signal, but sometimes is weak.
Click to expand...
Click to collapse
I had the same problem, i flashed eXistenZ rom now and it didnt reoccur. If it reoccurs ill tell you
MathieuBerger said:
I had the same problem, i flashed eXistenZ rom now and it didnt reoccur. If it reoccurs ill tell you
Click to expand...
Click to collapse
well, I don't feel confortable with rooting my device and flashing custom software..it would be great to solve the problem without that
I recently purchased an Xiaomi Redmi Note 3 Pro phone (kenzo), it covers all the bands that rogers uses in my area in Canada, I believe.
https://en.wikipedia.org/wiki/Rogers_Wireless
I can connect with the phone on LTE, HSPA+ with no problem, if available. Sometimes, if I am in certain area's, the signal indicator drops to 3G .... it shows a decent signal, but no calls or data can go through.
In this example on the following chart, the first WCDMA connection,my phone only indicates 3G and I can not make a call or use data. When my call attempt is done, it goes back to LTE. Then I try again. Then for the second WCDMA connection on the chart, I am connected as H+, I can make a call and use data. Whenever this phone connects to CID 31072 the problem happens. When I connect to CID 31075, no problem. These are just examples of towers that I reach from my home. I get the same problem occuring other areas.
Any suggestions on what I need to change on my phone? Is my phone making a kind of 3G connection for some reason, which Rogers doesn't support? I have tried everything I can think of, Miui dev versions, CM13, LineageOS 14.1 etc, change Android Radio Menu settings, etc.
Nothing seems to fix this issue.
Any advice would be greatly appreciated!
I have been using Network Signal Guru, and have figured out that the phone will connect calls data on 3g if the band it finds is B5-850M .... if the tower tries to connect to is B2-PCS-1900 the call fails.
I tried to block the use of band 2 with Network Signal Guru, but it seems to still use it when it finds it.
I have since flashed a LineageOS rom and used the Network Signal Guru to disable band 2 WCDMA. The phone has not been experiencing the issue at all since. I am cautiously optimistic that I have found a solution. Still not sure why this band doesn't work here though.
Poco F1 (MIUI Global Stable V11.0.8.0.QEJMIXM ROM) has significantly better 4G signal strength than 3G or 2G. In fact I got problem with that, when I'll recieve call or make a call, the phone automatically from 4G goes to 3G or 2G, and in that moment signal strength bars goes from 5 bars (4G) to 1-2 bars (3G) and often other side cannot hear my voice. Later I choose manualy network (3G or 2G) and when I try yo make a call => "Cellular network not available"
What should be the problem? Is it software or hardware problem? ...btw I make a clean install/flash thru fastbot of MIUI Stable V11.0.8.0.QEJMIXM few days ago, but I cannot notice some differences
VkriLAB said:
Poco F1 (MIUI Global Stable V11.0.8.0.QEJMIXM ROM) has significantly better 4G signal strength than 3G or 2G. In fact I got problem with that, when I'll recieve call or make a call, the phone automatically from 4G goes to 3G or 2G, and in that moment signal strength bars goes from 5 bars (4G) to 1-2 bars (3G) and often other side cannot hear my voice. Later I choose manualy network (3G or 2G) and when I try yo make a call => "Cellular network not available"
What should be the problem? Is it software or hardware problem? ...btw I make a clean install/flash thru fastbot of MIUI Stable V11.0.8.0.QEJMIXM few days ago, but I cannot notice some differences
Click to expand...
Click to collapse
It means that VoLTE (Voice over LTE) is not enabled or it is not available in your region. That is why it is switching to 3g network to make a call. As for the signal bars, never trust miui on that. Got to about phone -> and find a option where it shows imei, sim status, etc.
callmebutcher101 said:
It means that VoLTE (Voice over LTE) is not enabled or it is not available in your region. That is why it is switching to 3g network to make a call. As for the signal bars, never trust miui on that. Got to about phone -> and find a option where it shows imei, sim status, etc.
Click to expand...
Click to collapse
Yes, in my country VoLTE is not available, but I don't see that as an insufficiency, I use it only for data/internet 4G.
MIUI signal bars should "work" same for both 4G and 3G/2G, i think it is some other problem. Btw use it code *#*#4636#*#* (testing mode) and there i can manually set my network (WCDMA only, GSM only, LTE only, CDMA, TD-SCDMA/UMTS... and all variations of them). Usually LTE strength signal is "70-80dbm / 50-60asu". When I set to WCDMA only or GSM only it is ""100-110dbm / 1-10asu" and that's in the middle of the city (where I live). When I enter some Mall, stairs of building or hike on local mountains, when I want to make a call, the result is "CELLULAR NETWORK NOT AVAILABLE " :crying:
Does it can be antenna problem? But then, why 4G signal is far better than 3G? Does it have separate antennas??? I got no idea really what should be the problem about that
VkriLAB said:
Yes, in my country VoLTE is not available, but I don't see that as an insufficiency, I use it only for data/internet 4G.
MIUI signal bars should "work" same for both 4G and 3G/2G, i think it is some other problem. Btw use it code *#*#4636#*#* (testing mode) and there i can manually set my network (WCDMA only, GSM only, LTE only, CDMA, TD-SCDMA/UMTS... and all variations of them). Usually LTE strength signal is "70-80dbm / 50-60asu". When I set to WCDMA only or GSM only it is ""100-110dbm / 1-10asu" and that's in the middle of the city (where I live). When I enter some Mall, stairs of building or hike on local mountains, when I want to make a call, the result is "CELLULAR NETWORK NOT AVAILABLE " :crying:
Does it can be antenna problem? But then, why 4G signal is far better than 3G? Does it have separate antennas??? I got no idea really what should be the problem about that
Click to expand...
Click to collapse
Without VoLTE you cannot make a call on 4G network. The SIM will automatically switch to 3G/2G. It's the same across all phones, all carriers, and in any country.
noob.gamer said:
Without VoLTE you cannot make a call on 4G network. The SIM will automatically switch to 3G/2G. It's the same across all phones, all carriers, and in any country.
Click to expand...
Click to collapse
It is OK that. I know that. In fact, I GOT PROBLEM WITH 3G AND 2G SIGNAL STRENGTH. I mention 4G just to compare signals. I got 5 bars on 4G and 1-2 bars on 3G/2G on the same location. I have super fast internet thru 4G (50-100mbps), while when I set manually to 3G it didn't even connect data, furthermore, I cannot make a call (Cellular network not available). Obviously it is a strange problem. I'm not arguing about VoLTE or 4G...
Is it the same antenna for 2G, 3G and 4G signal? Should I replace it? I will repeat myself again, I can't get HOW CAN 4G signal be better than 3G/2G?!
I insert both SIM cards (with POCO F1 I use dual sim cards) to other phones (Xiaomi Mi4c, Alcatel Pixi 4, Lenovo A536...) and everything is OK with all of them. So, that means it is a POCO F1 problem.
VkriLAB said:
It is OK that. I know that. In fact, I GOT PROBLEM WITH 3G AND 2G SIGNAL STRENGTH. I mention 4G just to compare signals. I got 5 bars on 4G and 1-2 bars on 3G/2G on the same location. I have super fast internet thru 4G (50-100mbps), while when I set manually to 3G it didn't even connect data, furthermore, I cannot make a call (Cellular network not available). Obviously it is a strange problem. I'm not arguing about VoLTE or 4G...
Is it the same antenna for 2G, 3G and 4G signal? Should I replace it? I will repeat myself again, I can't get HOW CAN 4G signal be better than 3G/2G?!
I insert both SIM cards (with POCO F1 I use dual sim cards) to other phones (Xiaomi Mi4c, Alcatel Pixi 4, Lenovo A536...) and everything is OK with all of them. So, that means it is a POCO F1 problem.
Click to expand...
Click to collapse
Try changing slots. Or try a different carrier. The culprit could be your network provider. If the problem still persists go to any service center and get it checked. BTW it is actually strange to see that 3g/2g network is weaker than 4g. Usually it is the other way around.