ROM image that I'm trying to find for a Model 102 Tablet. This is all new and strange to me I have but little experience on android, so thanks again for your assistance.
The Motherboard: m102_v.1.2
Model M102
Processor: Allwinner quadcore A33
Android version 4.4.2
Firmware V2.0
Kernel 3.4.39
Kernel version [email protected] # 19
Monday Sep 15 15:01:21 CST 2014
Build No: astar_m102 eng 4.4.2 KVT49L 20140915 test_keys
It has an 8723BS wifi chip
I can get the tablet to run "sort of" with A33_U102_U1021C.201401013.img from "mytabletguru.com/allwinner-a33-firmware-and-tool/ " but there is no wifi. I have tried to modify the system configuration file for the U102 image file, so as to try to turn on the wifi chip, but without success. Any help appreciated.
The wifi chip is RT8723BS
-
EFPOM said:
ROM image that I'm trying to find for a Model 102 Tablet. This is all new and strange to me I have but little experience on android, so thanks again for your assistance.
The Motherboard: m102_v.1.2
Model M102
Processor: Allwinner quadcore A33
Android version 4.4.2
Firmware V2.0
Kernel 3.4.39
Kernel version [email protected] # 19
Monday Sep 15 15:01:21 CST 2014
Build No: astar_m102 eng 4.4.2 KVT49L 20140915 test_keys
It has an 8723BS wifi chip
I can get the tablet to run "sort of" with A33_U102_U1021C.201401013.img from "mytabletguru.com/allwinner-a33-firmware-and-tool/ " but there is no wifi. I have tried to modify the system configuration file for the U102 image file, so as to try to turn on the wifi chip, but without success. Any help appreciated.
The wifi chip is RT8723BS
-
Click to expand...
Click to collapse
Possibly an Eken mainboard - you likely need to open the unit up, and get the PCB model from the silkscreen markings, and search based on that information
Related
Good afternoon guys.
I bought a copy for some time the Samsung s4 1:1 china and not had as much knowledge about compatibility CWMs and installed an independent recovery I found on the internet of the original i9500 S4 and obvios destroy the native recovery mode reasons.
I wonder if anyone knows a custom rom for this model and a Cwm recovery:
model number
GT-i9500
Version of android
4.2.2
Version of the baseband
UNIVERSAL5410
Version of the kernel
3.4.5-526212
se.infra @ SEI-44 # 1
Wed Apr 24 20:59:59 KST 2013
Version number
JDQ39.I9500XXUAMDL
_______________________________
Processador MTK6577 Dual-core 1.0
512mb RAM
Images attached system !
Hello. I bought it on Aliexpress. The tablet is not Lenovo, it is Fake. And it is brick now. Please help me to find the ROM.
Specifications of Tablet:
MainBoard: K107-MB-V3.0 (2015-9-30)
Model: JLinksz Lenovo T908
CPU: MediaTek MT6580A
RAM: 1Gb Micron MT46H32M32LFMA-6 IT:B D9MCD
ROM: 16Gb FORESEE NCEMBSF9-16g
LCD: YLD-CEGA442-FPC-A0
Display: IPS 1280x800 (P+G, not OGS)
Camera: 2.1Mpx AF, 0.3 Mpx.
OS: Android 5.1
BB Chip: MT6580
MS Board.: Lenovo T908
Build Time: Thu Dec 3 09:47:01 CST 2015
Kernel Ver.:
3.10.72+ ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT
Thu Dec 3 09:52:59 CST 2015
Android Ver.: 5.1
SW Ver.: ALPS.L1.MP6.V2_JHZ6580.WEG.VF.L_P26
Custom Build Verno.: vKB019E
Modem Ver.: MOLY.WR8.W1449.MD.WG.MP.V6.P7, 2015/10/20 11:44
Bar code: 120401K1070000000784_172205 10P
I tried to write on e-mail of manufacturer ([email protected]). But they have not yet answered.
I found the ROM for that tablet, but it is impossible to insert a link.
I've got the same tablet in bootloop because I flashed the wrong TWRP. Can only get into fastboot. Need rom too.
Can I flash it using fastboot?
Thanks
Pls contact me via whatsapp,i need the rom for fake lenovo t908,got brick few days ago +239093738031. I need help urgently
alexfreerus said:
I found the ROM for that tablet, but it is impossible to insert a link.
Click to expand...
Click to collapse
Hi!
I would also need that rom, please! Can I where download it?
Thanks!
Hi all
I need firmware for meanit promise q760
allwinner tech
quad core a33
e9072aa 4ar1 (printed number on a33 p.)
Android 4.4.2
Firmware v. v2.0
core v. 3.4.39
builder [email protected]#3g
fri dec 12 17:15:41 CST 2014
astar_m71-eng 4.4.2 KVT49L 20141212 test-keys
firmware for TAB-P742-V1.0-20141124 works, but only lower fifth of touchscreen, no wi-fi, no camera...
Regards
More info and photos
Here are some more info of my meanit promise q760;
Touchscreen chip: Silead GSL 1680
Wi-fi chip: esp8089
Power Management IC Chip Controller: axp223
Is there any way to recompile kernel from TAB-P742-V1.0-20141124.img with drivers for my tablet? How to do this?
Please help.
Regards
Hi all
Some new firmware images are working with same result (no touchscreen, wifi, camera, bluetooth...)
140D A33 10.1.zip
M1025A_TZX_RASK_TZX0233_DBL2855_ESP8089_GSL3675_HD_20150206.rar
I would write a link for each image but I cannot (new user).
Looks like all of upper images have drivers/kernel modules for my tablet in /system/vendor/modules - esp8089.ko, GSLx680.ko, gslx680new.ko ...
I tried to start those modules with insmod, but other modules are active. I cannot stop rtl8150.ko and ... No rmmod.
How can I load modules that I need on boot?
Please help someone.
Magda
Hi nobody
TAB-P742C_V1.x.zip image works fine on my tablet. I have wifi, location, and lower fifth of toucscreen, no camera.
Insmod and rmmod commands works on this image, and I tried all gslX680 modules from /system/vendor/modules. Only gslX680new.ko is partialy working.
How can I adjust touchscreen? Is there any way?
Please do not let me talk to myself
Magda
Hi all
I tried so many gslX*680.ko modules and I cannot find right one. All I need is gslX680new.ko from meanit promise q760. Please someone send it to me. It is just a small file...
Magda
Hi All,
I've been scouring the net/forums for hours but have been able to get very far if i'm being honest, to be fair - I'm new to this.
Looking to upgrade from 5.1.1 to 6.0 or higher
So the company I work for issues Rugged tablets to engineers, these tablets are some variant or maybe the same as this.
aliexpress. com/item/7-rugged-Office-tablet-PC-Android-4-4-Data-processing-Warehouse-1D-2D-Barcode-Scanner-with/32651305648.html
My plan was to enrol these devices into our MDM but for that to work they need to be on 6.0 or above.
There is not a lot of info i can see but i'll list what i can.
Processor: Qualcomm MSM8916
Model Number: PAD
Android Version: 5.1.1
Baseband Version: .2.0.3.c1-00044-M8936FAAANUZM-1
Kernal Version: 3.10.49
[email protected] #1
Wed Mar 15 12:27:20 CST 2017
Build Number: PAD-userdebug 5.1.1 LMY47V eng.john.20170315_02.54-O
any help would be highly appreciated,
Thanks
Hello.
I bought a car with an Android unit, so I don't know what kind I have.
I want to upgrade the latest Android that exists to my unit.
Is there anyone who can help me?
Some details about my unit in the video:
https://www.youtube.com/watch?v=Bs1Ztg8TiAc&feature=youtu.be
Cr4zyMan said:
Hello.
I bought a car with an Android unit, so I don't know what kind I have.
I want to upgrade the latest Android that exists to my unit.
Is there anyone who can help me?
Some details about my unit in the video:
https://www.youtube.com/watch?v=Bs1Ztg8TiAc&feature=youtu.be
Click to expand...
Click to collapse
Doesnt look like an MTC B/C/D/E - what is the MCU reported as in that screen?
marchnz said:
Doesnt look like an MTC B/C/D/E - what is the MCU reported as in that screen?
Click to expand...
Click to collapse
I did not understand your question
Cr4zyMan said:
I did not understand your question
Click to expand...
Click to collapse
Suggest try reseller or start here: https://forum.xda-developers.com/wiki/Hui_Fei_Type
I THINK I HAVE THE SAME PRODUCT
CAN YOU FIND COMPATIBLE SOFTWARE?
I WANT TO CHANGE THE RADIO
MCU=MTC B / C / D / E ?
Android os:Android 9.1 XYAUTO:3.1 (3561)
CAN Bus: 3.0 (3561)
DDR: 2G FLASH: 32G
CPU: A53 1.5Ghz X 4
Radio: NXP6856
Capacitance: 10000 uF
Amplifier: ST7850 MOS bile duct 50W X4
Display:1024*600
MCU1: 0.5 (3561)
Android setting:
Model Number: evb3561sv_w_65_m0
Android versiyon: Android 9.1
Android security Patch Level: June 1, 2016
Baseband Version: MOLY.LR9.W1444.MD.LWTG.MP.V94.P62018/08/16 12:04
Kernel Version: 3.18.19
[email protected] #3
Thu sep 12 10:51:56 CST 2019
Build number: android-trunk-m0-V1.1
Custom build version: android-trunk-m0-V1.1
i need a new update for this version plz
API Ver: 2015-10-12 15:04:22 OSD-UI2-C4-V2.01
MCU Ver: 20105-06-26 09:48:23 PSTAR_04_C4_4730_5004_CAN(DAZHONG)
NK VER: 2015-08-15 9:21:24 C1-CHS-L-C1P1-V1-V2.0
EBOOT VER: 2015-04-15 15:02:11 C1-L-V3.3 PQ:14-08-15 19:32 FSH
None of these units are MTC (B/C/D/E). Suggest try reseller or start here: https://forum.xda-developers.com/wiki/Hui_Fei_Type