Related
Blackberry DUN Bluetooth Tethering Guide
WARNING!! FOR EXPERTS ONLY! YOU'VE BEEN WARNED! THIS IS NOT A SIMPLE CLICK AND DONE. IT MAY FRUSTRATE YOU!
This may or may not work for you, don't be surprised if it doesn't. Also Tethering may or may not be supported by your carrier. Data Plan recommended! @@
Your Mobile carrier may charge tethering fees, Continue at your own risk!
I suggest you read the whole thing before you action, and also please bare with my english, as it is my 3rd language.
Tether via Terminal: (Thanks lophyte for this great guide)
http://forum.cyanogenmod.com/topic/...-gtab-to-your-blackberry-phone-via-bluetooth/
I did not develop any apps or any scripts of any kind.
This was all done with some extensive research and alot of Trial and Error.
But with the little information I found out there, I was able to find some pretty interesting things.
I found this app called Q5 DUN, which was designed for an Old Internet Tablet called the SmartQ5 and ran Android 1.5.....
Therefore support is very limited, and there was only 2 updates back in 2009.
Also, I will be quoting guides out there, but I will properly credit the author for their efforts & findings. (Mostly lophyte )
Also would like to Thank RimDroid helping me with the research.
Click to expand...
Click to collapse
What you need:
-ALOT OF PATIENCE!
- Rooted Android Tablet ( I'm using a HP TouchPad )
- Android 2.3.7 (Reported by nihjar that it works on ICS!!)
- Blackberry Mobile Device with DUN Profile. ( I'm using BB Bold 9700 with OS 6 installed ) *Other Mobile's may work, need further testing*
- Terminal app
- Root Explorer app
- Super User app
- Q5 Bluetooth Dial Up Network app by wsoft2002
- Berry4All Scripts
- Chat Binary compiled by lophyte (Originally compiled for GTab, but works on my HP Touchpad) or you can compile one, link in lophyte's guide. **NOTE**(Reported by nihjar that it works on ICS!!)
Currently there are two ways to tether BT:
Option 1: Using the Q5 Bluetooth Dial Up Network app and modifying the Build.prop <-- Easiest Method, but buggy! But once configured, works perfectly!
Option 2: Running terminal commands <-- Connecting Manually thru Linux commands.
We will be installing both options in this guide.
Click to expand...
Click to collapse
- Make sure DUN is enabled on your BB ( Search google for guides on this )
Step 1: Download and Install on Android
-Install Root Explorer (if you don't have it already)
-Install Terminal (if you don't have it already)
-Install Q5 DUN http://android.gval.biz/
Step 2: Download the following on your PC
Berry4All Scripts Here
Chat Binary compiled by lophyte to Tether with Gtab Link to his Guide Here
File
lophyte said:
Download the berry4all package and find the config for your provider.
Berry4all is a Linux bluetooth tethering package that contains various pppd configurations for mobile providers. If your provider is not available in this package, you'll need to Google around for a proper pppd config and chatscript to allow you to tether to your blackberry or other mobile phone.
Click to expand...
Click to collapse
-Create a new folder which you will be placing the following files to better manage them.
-Copy the Chat binary file into the new folder.
-Extract bbtether and find the 2 files in /conf/ that corresponds to your mobile network, and copy those 2 files into the new folder. In this guide I will be using Rogers as an example. In this case, rogers & rogers-chat
lophyte said:
Modify the configurations
I haven't looked at the configs for the other providers, but the Rogers config needed a little bit of modification. The following line in my ppp peer config file needed to be changed:
Click to expand...
Click to collapse
Step 3:Modify the configurations
-Open rogers in a text editor ( I recommend Notepad ++)
-Find the line
connect "/usr/sbin/chat -f conf/rogers-chat
Click to expand...
Click to collapse
& change this line to:
connect "/system/bin/chat -f /etc/ppp/chatscripts/rogers-chat"
Click to expand...
Click to collapse
*NOTE* Edit the rogers-chat to which ever mobile provider you are using
-Find the line with 'novj' and place a # in front of it. Or Delete it, which ever is fine.
Your File should look like this:
# Tested by Max Taranukha
115200
noipdefault
defaultroute
#nomultilink
ipcp-restart 7
ipcp-accept-local
ipcp-accept-remote
lcp-echo-interval 0
lcp-echo-failure 999
nopcomp
noaccomp
pap-timeout 20
pap-restart 20
lcp-restart 10
#noauth
crtscts
usepeerdns
nomagic
noccp
#novj
user wapuser
password wap
name wapuser
#debug debug debug
# does not exist in all pppd versions (osx)
#replacedefaultroute
connect "/system/bin/chat -f /etc/ppp/chatscripts/rogers-chat"
Click to expand...
Click to collapse
**NOTE** Change UserName & Password that matches your APN settings.**
-Save and Exit.
Step 4:Now its time to copy these files to our Routed Android Devices.
-You will need to use Root Explorer to copy these files to your device, or Adb Push. ( Lookup the forums for on how to )
-Copy chat binary into /system/bin/ overwrite if prompt.
-Copy your mobile config files into these folders respectively.
a) rogers-chat -> /etc/ppp/peers (create this folders if it doesn't exist)
b) rogers -> /etc/ppp/chatscripts (create this folder if it doesn't exist}
-Reboot Device
-Once rebooted, you will need to pair your mobile device to your android device. Delete the profiles if it already exist, & pair again. (BT is buggy)
-Keep Bluetooth On.
Now here comes the most frustrating part... connecting!
Step 5:Configuring Q5 DUN
The best and easiest way to find you DUN MAC and Channel is using Q5 IMO,
but you can also use Linux commands. ( Terminal Tether guide above )
-Make sure you turn on BT, as this app does not toggle the BT on.
-Use this guide by wsoft2002 to configure Q5http://android.gval.biz/Q5_Bluetooth_DUN_installations.php
-In the Dial-Up Script, this is where the rogers-chat come into play.
-Open rogers-chat (your provider) file in Text Editor via Root Explorer.
-Select all Text and Copy in the the Dial-Up Script.
Your Dial-Up should look like this:
TIMEOUT 10
ABORT 'BUSY'
ABORT 'NO ANSWER'
ABORT 'ERROR'
SAY 'Starting GPRS connect script\n'
'' 'BBT_OS'
'' 'ATZ'
SAY 'Setting APN\n'
OK 'AT+CGDCONT=1,"IP","internet.com"'
ABORT 'NO CARRIER'
SAY 'Dialing...\n'
OK 'ATD*99#'
CONNECT
# Without ~p it does NOT continue passed Connect !!
~p
Click to expand...
Click to collapse
*Note the "internet.com", this is where you put your mobile APN. ( Google search if your mobile is not in the bbtether folder ) or settings on your phone.
**Note that the 'ATD*99#' will differ depending on the carrier. You can try 'ATD*99***1#' if that doesn't work, (try to google 'your carrier' ATD)
***Thanks to Nijhar he found out that on Telus Network, ~p causes connection issues in Q5, so this may vary for you. (Trial and Error!)
****NEW**** Found * Another way to find you isp APN settings, using Blackberry Desktop Software, and plugging in the mobile device, you can browse all authorized BB carriers.
-Save Configuration & Hit connect to Test it out.
Allow the connection and checkmark 'Do not show again'
If you get 'PPP Connection is UP!' GREAT! Skip to Step 7.
-If you get 'PPP Failed to connect' then obviously it didn't work.
Now there are a few factors that causes PPP failed to connect.
a) Q5 not setup properly, I suggest you double check your settings.
b) Pairing problems, or Trust permissions. Re-Pairing might fix it.
c) Remove or Add ~p from the chat script.
d) Reboot both devices and try again.
e) Tether is not supported by your carrier.
f) Make sure Dial-Up Networking Service is enabled on your phone. in Bluetooth connections>paired devices>Touchpad (May vary depending on BB OS)
Step 6:Testing BT connection in Terminal
Q5 might not work for you, so Terminal will be your next Option.
-Open Terminal and type 'su' for super user rights.
-type the following '# rfcomm bind /dev/rfcomm0 <bluetooth MAC> <channel>'
-then type 'pppd /dev/rfcomm0 call rogers' <- change 'rogers' to your carrier.
-Look at your Blackberry 'Modem Mode Enabled' should appear if it connects.
-If it does not connect, please revise the guide and make sure you have done everything exactly up till now.
-'# killall pppd ' to end the connection
Step 7:Configuring DNS to Google's DNS or of your choise
-In Terminal
-Type 'su'
-Then 'setprop net.dns1 8.8.8.8'
-Next 'setprop net.dns2 8.8.4.4'
*You can put as much as dns4 if you like, but Google's DNS should work fine**
Step 8:Testing Internet Connection
-Browsing
-Youtube
-Facebook
-Apps & Games (Trial & Error)
Step 9:Modifying the build.prop to eliminate setprop net.dns on reboot.
-Add net.dns1=8.8.8.8 & net.dns2=8.8.4.4
Working:
-Browsing the Web
-Streaming Video/Music
-Downloading Files using Opera Browser(Perfect), or xwind downloader app(Not perfect, but will work with any browser). Or use share link to Opera browser to DL using 'Choose Browser app found on the Market' -NEW-
-GO Launcher EX works great! Weather widget, facebook, e-mail etc all works! <~ If you want a fully functional homescreens,widgets etc
-Rogers,Telus & Bell Networks
Not Working:
-Android Market (Browse-able, but can't download anything)
-Google Currents
-Kindle App ( can log-in, but can't browse new books )
-Weather Apps ( News & Weather Works tho )
-Games
-Essentially any apps that cannot detect BT as Internet Source. Unlike most apps keeps trying to connect regardless of the 'available network'.
Support:
And if all fails, you may post below, and tell me your problems.
-Please provide the following info:
a) Mobile model & OS version
b) Tablet model & OS version
c) Carrier
d) Brief Description of the problem.
Please do not complain if it does not work for your device. We're simply trying to help the Android community by giving them support on unsupported devices.
UPDATED 22/12/2011:
Brut.all said:
And you will have problems with Android Market and some other apps. Internet is configured at linux level, Android OS don't know about it, so if application asks: "Do we have internet connection?", Android replies: "No". Android Market will wait for connection even if there is one.
Click to expand...
Click to collapse
I guess there's no workaround? Can someone with some DUN or PAN knowledge, shed some light on us?
WIP:
-Add Other Carriers ( Fido, etc?) (Feedback needed from the community)
Credit goes to:
lophyte for this Terminal Tethering guide & Chat Binary.
http://forum.cyanogenmod.com/topic/37078-how-to-tether-your-gtab-to-your-blackberry-phone-via-bluetooth/
berry4all for the chat scripts. http://www.berry4all.com/
wsoft2002 for his Q5 DUN program. http://android.gval.biz/
Max Taranukha who's name is on the script.
Brut.all for his finding on why Market doesn't work.
RimDroid for helping with the research, and helping me understanding a little bit more about Linux Dial-Up Networking.
nijhar for testing and helping this project out.
Thank you all for the support.
Click to expand...
Click to collapse
I hope our community keeps growing and more new devices are supported as days passes by.
Merry X-Mas everybody!
Vampirexhunter
Please post a reply if this worked or failed for you.
Most appreciated.
Simply amazing!! Thank you very much. Was waiting for the ROM update on my BB that would include wireless hotspot. That hasn't happened
Running a Torch 9860 with my rooted Touchpad. Just followed your instructions. Except I did not modify the build.prop file yet. I can't believe how fast this is!
benven said:
Simply amazing!! Thank you very much. Was waiting for the ROM update on my BB that would include wireless hotspot. That hasn't happened
Running a Torch 9860 with my rooted Touchpad. Just followed your instructions. Except I did not modify the build.prop file yet. I can't believe how fast this is!
Click to expand...
Click to collapse
Awesome! Does downloading work for you? and are you using Q5 or Terminal way?
I am using Q5. I only tried the Market. And as you stated, can get there but cannot download apps. As soon as I shut down Q5 and started up wifi, the apps downloaded. I am going to try Google Maps and Navigation to see if they work.
One question...does it matter where you put the net.dns1=8.8.8.8 & net.dns2=8.8.4.4 line in build.prop?
Thanks again and Merry Christmas!
benven said:
I am using Q5. I only tried the Market. And as you stated, can get there but cannot download apps. As soon as I shut down Q5 and started up wifi, the apps downloaded. I am going to try Google Maps and Navigation to see if they work.
One question...does it matter where you put the net.dns1=8.8.8.8 & net.dns2=8.8.4.4 line in build.prop?
Thanks again and Merry Christmas!
Click to expand...
Click to collapse
anywhere works.
New Discovery:
Q5 DUN does not require the ppp files (rogers + rogers-chat)
It only requires the chat binary file /system/bin
So if you are not using the terminal way, you can safely delete those files without affecting Q5.
New Discovery 2:
Stock browser,Firefox Beta & Dolphin HD - all three can't download... lol
But...Using Opera Browser, I was able to download files!! Yay! I'm assuming this app does not rely on 'Connectivity Manager'. I'm so happy, as this is the only browser that worked out of 4!
New Findings! Check it Out!
Simply amazing!! 关注中！
Nice Guide Vamp.
Couldn't have done it better myself!
Tried the Amazon Silk Browser
This Browser rocks in terms of browsing speeds!!
Can't download with this browser.. bummer..
New Finding!
I found a Download manager that works with BT.
Xwind Downloader by JasonWong.
By using this DL manager, I can use any browser I want to browse, and use this manager to download!
Hello, I have a question. When you pair you BB to HP Touchpad, does your Bluetooth say paired but not connected? Is that ok, or do I need to fix it somehow for the Tethering to work? So far I'm not able to tether, so I was wondering if that was the problem.
Some info:
Hp Touchpad running cyanogenmod 7
Blackberry Torch 9800 with Rogers and data plan.
Thank you.
kryal said:
Hello, I have a question. When you pair you BB to HP Touchpad, does your Bluetooth say paired but not connected? Is that ok, or do I need to fix it somehow for the Tethering to work? So far I'm not able to tether, so I was wondering if that was the problem.
Some info:
Hp Touchpad running cyanogenmod 7
Blackberry Torch 9800 with Rogers and data plan.
Thank you.
Click to expand...
Click to collapse
Hi Kryal,
It's suppose to say paired but not connected, that's normal.
All I can say is follow my instructions very carefully.
Which method are you using? Terminal or Q5?
Also make sure Dial-Up Networking Service is enabled on your phone. in Bluetooth connections>paired devices>Touchpad
vampirexhunter said:
Hi Kryal,
It's suppose to say paired but not connected, that's normal.
All I can say is follow my instructions very carefully.
Which method are you using? Terminal or Q5?
Also make sure Dial-Up Networking Service is enabled on your phone. in Bluetooth connections>paired devices>Touchpad
Click to expand...
Click to collapse
Never mind I fixed it by following the guide closely YOU ARE THE BEST. Donated, you deserve it.
kryal said:
Never mind I fixed it by following the guide closely YOU ARE THE BEST. where do I donate to you guys?
Click to expand...
Click to collapse
Awesome! Glad it worked out for you.. Donate? lol Thanks, but no need.. Free! I did not developed any software, and it was mostly used information out on the net that I slapped together
Even Netflix works on this!!! The video is a bit choppy but I'm very surprised anyways.
kryal said:
Even Netflix works on this!!! The video is a bit choppy but I'm very surprised anyways.
Click to expand...
Click to collapse
Yea, I've been trying to speed up the connection, but very unsuccesful.. it seems to cap at ~1mbps.. and on usb i can get about 2.5mbps (Tether to PC)
Also Rogers network is slow.
cm7 3.5
Hi there, I need some help please, is my chatscripts or peers wrong??
Operator: Singtel
Country: Singapore
APN: internet
user:65ideas
password: <no password>
Blackberry bold 9650 OS 6(latest)
cm7 alpha 3.5
Code:
TIMEOUT 10
ABORT 'BUSY'
ABORT 'NO ANSWER'
ABORT 'ERROR'
ABORT "NO DIALTONE"
ABORT VOICE
ABORT RINGING
SAY 'Starting GPRS connect script\n'
'' 'BBT_OS'
OK 'ATZ'
OK 'AT+CGDCONT=1,"IP","internet"'
ABORT 'NO CARRIER'
SAY 'Dialing...'
OK 'ATD*99#'
CONNECT
Code:
# Tested by Max Taranukha
115200
noipdefault
defaultroute
#nomultilink
ipcp-restart 7
ipcp-accept-local
ipcp-accept-remote
lcp-echo-interval 0
lcp-echo-failure 999
nopcomp
noaccomp
pap-timeout 20
pap-restart 20
lcp-restart 10
#noauth
crtscts
usepeerdns
nomagic
noccp
#novj
user "65ideas"
password ""
name Internet
#debug debug debug
# does not exist in all pppd versions (osx)
#replacedefaultroute
connect "/system/bin/chat -f /etc/ppp/chatscripts/singtel-chat"
tried with ~p or without ~p
Tried
user 65ideas
password ""
user 65ideas
password
jinnyroxs said:
Hi there, I need some help please, is my chatscripts or peers wrong??
Operator: Singtel
Country: Singapore
APN: internet
user:65ideas
password: <no password>
Blackberry bold 9650 OS 6(latest)
cm7 alpha 3.5
Code:
TIMEOUT 10
ABORT 'BUSY'
ABORT 'NO ANSWER'
ABORT 'ERROR'
ABORT "NO DIALTONE"
ABORT VOICE
ABORT RINGING
SAY 'Starting GPRS connect script\n'
'' 'BBT_OS'
OK 'ATZ'
OK 'AT+CGDCONT=1,"IP","internet"'
ABORT 'NO CARRIER'
SAY 'Dialing...'
OK 'ATD*99#'
CONNECT
Code:
# Tested by Max Taranukha
115200
noipdefault
defaultroute
#nomultilink
ipcp-restart 7
ipcp-accept-local
ipcp-accept-remote
lcp-echo-interval 0
lcp-echo-failure 999
nopcomp
noaccomp
pap-timeout 20
pap-restart 20
lcp-restart 10
#noauth
crtscts
usepeerdns
nomagic
noccp
#novj
user "65ideas"
password ""
name Internet
#debug debug debug
# does not exist in all pppd versions (osx)
#replacedefaultroute
connect "/system/bin/chat -f /etc/ppp/chatscripts/singtel-chat"
tried with ~p or without ~p
Tried
user 65ideas
password ""
user 65ideas
password
Click to expand...
Click to collapse
This setting might differ from carrier: 'ATD*99#'
This is the modem command to connect for Rogers.. you will have to find out which one works for you.
Try this one: 'ATD*99***1#'
If that doesn't work, you will need to test on your own, as I am only able to test Canadian carriers.
You can find other ATD commands online, if this one doesn't work.
hi guys, I hope you can help.. I really googled a lot about this, and also made many tests on my phone and waste a lot of time, but couldn't find a solution yet.. also this seems to be affecting many other people, so I don't understand how is possible nobody found a fix for that until now..
(I'm posting in general section because this seems to affect any kind of phones running cm10.1 + gapps)
the problem is that if I go to manage apps > running apps, I see Media process (DownloadService) always running! that could drain my battery and/or download data, in any case I don't see a point in having it always running, so I would like to get rid of it!
what I discovered so far is that the process is related to both gapps and Downloadprovider.apk package included in any CM10.1 build, in fact:
1. the process starts appearing only after installing the gapps (I use a very minimal 4.2 gapps package, about 10mb only)
2. if I delete Downloadprovider.apk package from /System/App, the process doesn't appear anymore
The problem is that if I delete the Downloadprovider.apk package then I start getting gapps related FC's and phone becomes unstable (and very probably will not be possible to download anymore things from the browser and/or play store)!
So what could I do to safely get rid of that process? Maybe disable or freeze some other apps/processes? But I wouldn't know what to disable exactly..
guys please help me I am really getting crazy with that! also that could help many other people :good:
thanks a lot in advance
EDIT: maybe it was related to Maps since I installed maps 7.x I don't see that process anymore!
moly82 said:
hi guys, I hope you can help.. I really googled a lot about this, and also made many tests on my phone and waste a lot of time, but couldn't find a solution yet.. also this seems to be affecting many other people, so I don't understand how is possible nobody found a fix for that until now..
(I'm posting in general section because this seems to affect any kind of phones running cm10.1 + gapps)
the problem is that if I go to manage apps > running apps, I see Media process (DownloadService) always running! that could drain my battery and/or download data, in any case I don't see a point in having it always running, so I would like to get rid of it!
what I discovered so far is that the process is related to both gapps and Downloadprovider.apk package included in any CM10.1 build, in fact:
1. the process starts appearing only after installing the gapps (I use a very minimal 4.2 gapps package, about 10mb only)
2. if I delete Downloadprovider.apk package from /System/App, the process doesn't appear anymore
The problem is that if I delete the Downloadprovider.apk package then I start getting gapps related FC's and phone becomes unstable (and very probably will not be possible to download anymore things from the browser and/or play store)!
So what could I do to safely get rid of that process? Maybe disable or freeze some other apps/processes? But I wouldn't know what to disable exactly..
guys please help me I am really getting crazy with that! also that could help many other people :good:
thanks a lot in advance
Click to expand...
Click to collapse
Maybe you have some program/app installed which uses the download manager? Some app trying to download an update outside of the regular mechanism? I don't see DownloadService running on my phone unless I instructed it to download something. Do you notice anything downloadmanager/media related in logcat? If in doubt, attach the phone to a PC, run the following commands and attach the resulting file ('attach_me.txt') here:
Code:
adb shell 'ps; echo -----------;logcat -v time -b main -b system -b events -d;echo -----------;dumpsys;' > attach_me.txt
Use the full path to adb if you need to.
This shows the currently running processes (ps), the contents of the main, system and event logs (logcat) and a snapshot of the current state of your phone (dumpsys). If there is anything there you don't want to show to the whole world edit the resulting file before attaching it here.
thanks a lot for the reply my friend
tonight at home I think I will be able to run the adb command you suggested me (in my home computer I have sdk installed)
so far I checked logcat in terminal ("logcat |grep edia" and "logcat |grep ownload") and this is what I got:
$ su
# logcat |grep edia
D/Vold ( 1197): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 1197): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
W/PackageParser( 1626): No actions in intent filter at /data/app/org.wikipedia-1.apk Binary XML file line #39
I/ActivityManager( 1626): Start proc android.process.media for broadcast com.android.providers.media/.MtpReceiver: pid=1765 uid=10011 gids={50011, 1015, 1023, 1024, 1028, 2001, 3003, 3007}
V/ActivityThread( 1765): android.process.media white listed for hwui
D/SystemUIService( 1701): loading: class com.android.systemui.media.RingtonePlayer
D/SystemUIService( 1701): running: [email protected]
W/ContextImpl( 1626): Calling a method in the system process without a qualified user: android.app.ContextImpl.bindService:1458 android.bluetooth.BluetoothHeadset.:273 android.bluetooth.BluetoothAdapter.getProfileProxy:1155 android.media.AudioService.getBluetoothHeadset:2198 android.media.AudioService.access$2800:104
W/ContextImpl( 1626): Calling a method in the system process without a qualified user: android.app.ContextImpl.bindService:1458 android.bluetooth.BluetoothA2dp.:160 android.bluetooth.BluetoothAdapter.getProfileProxy:1158 android.media.AudioService$AudioServiceBroadcastReceiver.onReceive:4087 android.app.LoadedApk$ReceiverDispatcher$Args.run:758
$ su
# logcat|grep ownload
I/ActivityManager( 1624): Start proc com.google.android.youtube for broadcast com.google.android.youtube/.core.transfer.DownloadService$BootReceiver: pid=2305 uid=10050 gids={50050, 3003, 1015, 1006, 1028}
W/ActivityManager( 1624): No content provider found for permission revoke: file:///data/data/com.android.providers.downloads/cache/downloadfile.apk
W/ActivityManager( 1624): No content provider found for permission revoke: file:///data/data/com.android.providers.downloads/cache/downloadfile.apk
I'm attaching also screenshots of the process I'm talking about
EDIT: I reinstalled everyting from scratch as a new build by quarx came out.. it seems that installing only cm build + minimal gapps, that process doesn't show up. Later after I installed back all my apps (via app2zip flashable zip) the process showed up again.. so probably you are right and there is a certain app using that process.. but how can I understand which one has relation with that service? maybe YouTube as i see it mentioned in logcat?
delete
i could generate the logs you asked without using the pc but using the phone terminal and multiple commands.. i'm uploading them to my dropbox links are below thanks in advance..
http://db.tt/gJLBYeT7
http://db.tt/OahQ8Zf7
http://db.tt/KPUTy4et
YAFU what happened to you?
it seems to me after I installed latest maps 7.x the media > download process is not appearing anymore in running processes.. maybe it was related to sh*tty maps??? :fingers-crossed:
CONSOLE WP8
UPDATE: 1.8 - 2014-12-23 03:10:00
I'm excited to announce today the 1.8 update "WP8 Console"
- Added new command: [shortcut] to create tiles (shortcut) on the home screen link to a file
- Added new command: [set] to create / edit environment variable
- Adds new command: [tree] To list all files in the current folder and displayed in a tree
- Added new command: [reload] update all files are added, deleted or updated from the phone storage
- Added support batch file (.bat, .bat, .command) can execute the batch file with 'shell' easy to see the available commands please check the Help menu in the application
- Add support and management of files from the phone storage, edit, delete, rename, copy, move the file
- Add new examples files with commands 'batch' in (c: \ scripts)
- Improve in landscape view
- Add the new control loop [for], allowing wonderful combinations for scripts
- Improved performance and fixed some bugs in the user interface (language), network, local control, etc ..
WATCH OUT ! Apparently there is a problem to change the culture of application language for the "lite" version of "WP8 Console" with 1 missing images on the window "Wizzard". Will be corrected in the evening today!
Execute "shell" commands from your Windows Phone, manage your files, automated actions created scripts, created tile shortcuts to files, etc. The only application "console" on the store!
Access to over 45 functions with the controls ("MS-DOS")
- View the contents of a directory
- Read the contents of a file
- Modify a file
- Move a file
- Copy a file
- Rename file
- Print a file and email
- Delete files / folders
- Get information about the network
- Scripts write and run the .bat file script, .wpbat
- Ping - Ipconfig - net view (network control jack)
- Start programm windows phone from the shell
- View / execute files from the shell (music, photos, videos, audio, html, etc.)
- Use the loop function with "for"
- Etc ..
Example - Sample code you can use
Example batch file script 1:
//Ask a number to the user and loop on it
@echo off
echo (Enter a number to count please)
set /p /a loopNumber=
for /l %%i in (1,1,%loopNumber%) do echo %%i
Example batch file script 2:
//Remove all the files with the .txt extension from the current directy
for %%i in (*.txt) del %%i
Example batch file script 3:
//Ask the user how many fake folder he wank make
@echo off
echo (How many fake folder do you want make ?)
set /p numberOfFakeFolder=
for /l %%i in (1,1,%numberOfFakeFolder%) md fakeFolder_%%i
Example batch file script 4:
//Ping on google , save the result into a file and send the content by email
@echo off
ping google.com > res.txt
print res.txt
Click to expand...
Click to collapse
App link:
Console WP8 : http://www.windowsphone.com/en-us/store/app/console-wp8/8da96293-ec71-e011-81d2-78e7d1fa76f8
Console WP8 Lite : http://www.windowsphone.com/en-us/store/app/console-wp8-lite/2d27a82d-ef71-e011-81d2-78e7d1fa76f8
Click on the pictures to see more :good:
Wow, nice. Download link?
GoodDayToDie said:
Wow, nice. Download link?
Click to expand...
Click to collapse
Hi, Thank you and sorry . I just added now the link for my application in the Windows Phone Store
Update: 1.8 - 2014-12-23 03:10:00
UPDATE: 1.8 - 2014-12-23 03:10:00
I'm excited to announce today the 1.8 update "WP8 Console"
- Added new command: [shortcut] to create tiles (shortcut) on the home screen link to a file
- Added new command: [set] to create / edit environment variable
- Adds new command: [tree] To list all files in the current folder and displayed in a tree
- Added new command: [reload] update all files are added, deleted or updated from the phone storage
- Added support batch file (.bat, .bat, .command) can execute the batch file with 'shell' easy to see the available commands please check the Help menu in the application
- Add support and management of files from the phone storage, edit, delete, rename, copy, move the file
- Add new examples files with commands 'batch' in (c: \ scripts)
- Improve in landscape view
- Add the new control loop [for], allowing wonderful combinations for scripts
- Improved performance and fixed some bugs in the user interface (language), network, local control, etc ..
For more information , please check the first page, i edited the content presentation.
Update last corrections as requested by email.
- Problem for set the language in the 'lite' version :Console WP8 Lite
- Pictures missing in the "wizard" popup . The first use
- Problem, help menu no change the language dynamically after set a new language
New versions:
Console WP8 1.8.0.1
Console WP8 Lite 1.8.0.1
Thanks to Microsoft who have release my update very quickly ! (1 day)
Can i ping something with this tool ?
Stefan Caromov said:
Can i ping something with this tool ?
Click to expand...
Click to collapse
Hi Stefan , yes off course you can ping on internet or local machines
Examples:
ping 8.8.8.8
ping 192.168.1.5
ping google.com
start command is not working .
can you show the syntax of that command .
irshad2809 said:
start command is not working .
can you show the syntax of that command .
Click to expand...
Click to collapse
Hi, which order are you talking about ?
for [Ping] command for example with google, you just need tape :
ping google.com
and then ,tape "enter" button.
For more information, you can click on the "Help" button
kingmiddle said:
Hi, which order are you talking about ?
for [Ping] command for example with google, you just need tape :
ping google.com
and then ,tape "enter" button.
For more information, you can click on the "Help" button
Click to expand...
Click to collapse
look i have attached screen shot . the START command .
its not working
Mh you mean this command . Ok sorry
you can use the (start) command for execute or start different program
Example
Open new html page on specific url
start http://www.google.ch/search?q=lol
Open Power menu
start ms-settings-power
and again ....
After you can combine this code with a script etc..
kingmiddle said:
Mh you mean this command . Ok sorry
you can use the (start) command for execute or start different program
Example
Open new html page on specific url
start http://www.google.com?d=blablabla
Open Power menu
start ms-settings-power
and again ....
After you can combine this code with a script etc..
Click to expand...
Click to collapse
can i use uri of apps to open them using this
ho, sorry . You mean the "Start" command .
Ok no problem. With "Start" command , you execute/open different programm
For example :
// open a website with arguments
start http://google.com/search?q=test
// open new email
start mailto:[email protected]
// open Bluetooth menu
start ms-settings-Bluetooth
After you can mix and make a 'batch' script file , or create a shortcut tile link to this script
Example :
Step 1 - write the code into a file with (echo) for open Bluetooth menu
echo start ms-settings-Bluetooth >> c:\data\test.bat
Step 2 - execute the (shortcut) command for create a tile to the home screen (.ink)
shortcut /n myTileTItle /t c:\data\test.bat
/n => shortcut name
/t => target file
/i => icon picture
you can check the sample scripts to "c:\scripts" and try to open the code with the type command.
Example :
//Read the code
Type mySampleFile.bat
//Execute the batch file
mySampleFile.bat
@irshad2809
this is a very interesting question !
I know you can start all of this command :
http://msdn.microsoft.com/en-us/library/windows/apps/jj662937(v=vs.105).aspx
I don't know before , we can start another app with a uri shema . For now , i use the code "Windows.System.Launcher.LaunchUriAsync" like on the picture i attach, i don't know if you can use it or not for open a installed app . Please if you try , can you come back give me the result ?
Maybe i can add this feature to the next update
kingmiddle said:
@irshad2809
this is a very interesting question !
I know you can start all of this command :
http://msdn.microsoft.com/en-us/library/windows/apps/jj662937(v=vs.105).aspx
I don't know before , we can start another app with a uri shema . For now , i use the code "Windows.System.Launcher.LaunchUriAsync" like on the picture i attach, i don't know if you can use it or not for open a installed app . Please if you try , can you come back give me the result ?
Maybe i can add this feature to the next update
Click to expand...
Click to collapse
this feature is already there in your app ,
like if you type " start zune " : xbox music will open
or start whatsapp : whatsapp opens .
there is list of uri for almost apps on nokia wiki website .
. but i was looking for , something like "Native Toast Launcher " . can you look into that ?
irshad2809 said:
this feature is already there in your app ,
like if you type " start zune " : xbox music will open
or start whatsapp : whatsapp opens .
there is list of uri for almost apps on nokia wiki website .
. but i was looking for , something like "Native Toast Launcher " . can you look into that ?
Click to expand...
Click to collapse
Ok, i got it now. I will work on this new feature, and implement it for the next update . Between the middle and the end of january I agree with you , this feature can be interesting .
Thank you very much
i mean can i see the sent and reciecved packages ? example : ping google.com -t -l 1024
Invalid URI: The hostname could not be parsed.
.
.
.
can you explain about this .
@Stefan Caromov , sorry for now , you can only use the [w] and [n] arguments for set the timeout or how many packet will be send . By the way you can not see the size of packet size. I take not now for implemant this new feature in the next update
@irshad2809 Do you can please , show me wich 'hostname' you used ?
ping Google.com => is ok
ping 8.8.8.8 => is ok
ping 192.168.1.1 => is ok
ping http://www.google.com => is not ok ! As the true cmd command line
good game, this app is very nice
Well, i struggled for half a day relentlessly and finally got Reaver Working on my Xiaomi Mi4 android phone with a big help from the below mentioned link , everything is going good and fine, i got the Reaver app working on my Rooted app without bcmon and it worked and i'm ready to hack the network but just as i bypassed "Test Monitor" successfully(by loading a few scripts and debugging) and hit "Start Attack" this thing showed up, below i've written down the issue as it appeared since i'm not allowed to post screenshots & Links untill i make 10 posts(i'm a new user) and the scripts that i used to bypass Test Monitor are attached below, i'm basically a noob but good at technical things, the guide mentioned in the below link isn't as easy as it is told there, there are a few more steps that aren't added in the guide!!
HELP URGENTLY!!!! I waisted a whole day trying to get it working, i'd be so grateful :laugh: if you could help me out with it! PLEASE!! :crying:
Here are those scripts i loaded and put the phone on debug mode
Custom activation script:
#!/bin/bash
svc wifi disable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
Custom Warm-up Script
#!/bin/bash
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
Custom stop Script:
#!/bin/bash
svc wifi enable
echo “rfasuccess”
1. this happened first but i continued anyway.
Stdout:
"rfa success"
StdErr:
Control the Wifi manager
usage: svc wifi [enable[disable] Turn wifi on or off.
svc wifi prefer
set Wifi as the preferred data network
.//srart.shl[4]: sh :not found
.//start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : No Such File or Directory
./start.sh[6]: ./enable_bcmon : not found
2. and then this happened in the processing window
sh: <stdin>[3]: sh: not found
CANNOT LINK EXECUTABLE: could not load library "libcap.so.1" needed by "./reaver"; caused by library "libcap.so.1" not found
3. and finally when i hit stop, this message showed up
Stdout:
?rfasuccess?
StdErr:
Control the Wi-fi manager
usage: svc wifi[enable[disable]
Turn Wi-Fi on or off
svc wifi prefer
Set Wi-Fi as the preferred data network
These are the Steps i followed to get the monitoring mode done.
1.Download bcmon- (link)
2.Save the app on your sdcard but don’t install it.
3.download Reaver apk(RFA) and install it.- (link)
4.Download root explorer by speed speed software and install it.- (link)
6.Install and open bcmon app
keep it open for 5s and then press home.
(This will surely create a com.bcmon.bcmon folder in/Data/data)
7.Open root explorer and browse to the bcmon apk.
8.Select it and press view.
9.Open assets.
10.Copy all the files to /Data/data/com.bcmon.bcmon/files.
#If any file or folder of the same name is found then delete it#
/Now you’ll have to add custom scripts that I have given below(just copy them in a note editor and save with a .sh extension)
Start script-
Start script- mentioned above in custom start script
Warm script- mentioned above in custom warm up script
Stop script- mentioned above in custom stop script
#Now open root explorer
Browse to com.bcmon.bcmon/files/tools/reaver
Long press on it and press permissions and then check the execute boxes(all 3).now click OK.
Now in tools long press enable_bcmon and give it execute rights (all 3).now click OK .
#All set….now open reaver and scan for networks press on one with green color and with a good range.
Go to settings and monitor mode setting and unchek the use bcmon and load all the scripts properly.
#while loading scripts start.sh is the activation script,warm.sh is the warm up script and stop.sh is the stop script. #
Now scroll down and check the debugging mode.
#Go back to the attack screen and press test monitor mode.
Rfasuccess comes then press OK and press start attack.
#All done,now wait until it finds the routers key for you.
#This worked on my I ball slide 6318i,Alcatel ot 918n and redmi note.
goodpeace said:
Well, i struggled for half a day relentlessly and finally got Reaver Working on my Xiaomi Mi4 android phone with a big help from the below mentioned link , everything is going good and fine, i got the Reaver app working on my Rooted app without bcmon and it worked and i'm ready to hack the network but just as i bypassed "Test Monitor" successfully(by loading a few scripts and debugging) and hit "Start Attack" this thing showed up, below i've written down the issue as it appeared since i'm not allowed to post screenshots & Links untill i make 10 posts(i'm a new user) and the scripts that i used to bypass Test Monitor are attached below, i'm basically a noob but good at technical things, the guide mentioned in the below link isn't as easy as it is told there, there are a few more steps that aren't added in the guide!!
HELP URGENTLY!!!! I waisted a whole day trying to get it working, i'd be so grateful :laugh: if you could help me out with it! PLEASE!! :crying:
Here are those scripts i loaded and put the phone on debug mode
Custom activation script:
#!/bin/bash
svc wifi disable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
Custom Warm-up Script
#!/bin/bash
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
Custom stop Script:
#!/bin/bash
svc wifi enable
echo “rfasuccess”
1. this happened first but i continued anyway.
Stdout:
"rfa success"
StdErr:
Control the Wifi manager
usage: svc wifi [enable[disable] Turn wifi on or off.
svc wifi prefer
set Wifi as the preferred data network
.//srart.shl[4]: sh :not found
.//start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : No Such File or Directory
./start.sh[6]: ./enable_bcmon : not found
2. and then this happened in the processing window
sh: <stdin>[3]: sh: not found
CANNOT LINK EXECUTABLE: could not load library "libcap.so.1" needed by "./reaver"; caused by library "libcap.so.1" not found
3. and finally when i hit stop, this message showed up
Stdout:
?rfasuccess?
StdErr:
Control the Wi-fi manager
usage: svc wifi[enable[disable]
Turn Wi-Fi on or off
svc wifi prefer
Set Wi-Fi as the preferred data network
These are the Steps i followed to get the monitoring mode done.
1.Download bcmon- (link)
2.Save the app on your sdcard but don’t install it.
3.download Reaver apk(RFA) and install it.- (link)
4.Download root explorer by speed speed software and install it.- (link)
6.Install and open bcmon app
keep it open for 5s and then press home.
(This will surely create a com.bcmon.bcmon folder in/Data/data)
7.Open root explorer and browse to the bcmon apk.
8.Select it and press view.
9.Open assets.
10.Copy all the files to /Data/data/com.bcmon.bcmon/files.
#If any file or folder of the same name is found then delete it#
/Now you’ll have to add custom scripts that I have given below(just copy them in a note editor and save with a .sh extension)
Start script-
Start script- mentioned above in custom start script
Warm script- mentioned above in custom warm up script
Stop script- mentioned above in custom stop script
#Now open root explorer
Browse to com.bcmon.bcmon/files/tools/reaver
Long press on it and press permissions and then check the execute boxes(all 3).now click OK.
Now in tools long press enable_bcmon and give it execute rights (all 3).now click OK .
#All set….now open reaver and scan for networks press on one with green color and with a good range.
Go to settings and monitor mode setting and unchek the use bcmon and load all the scripts properly.
#while loading scripts start.sh is the activation script,warm.sh is the warm up script and stop.sh is the stop script. #
Now scroll down and check the debugging mode.
#Go back to the attack screen and press test monitor mode.
Rfasuccess comes then press OK and press start attack.
#All done,now wait until it finds the routers key for you.
#This worked on my I ball slide 6318i,Alcatel ot 918n and redmi note.
Click to expand...
Click to collapse
let me know as well if you find any solution.
i get frist error
Start .sh not found plzzz help me bro
Same here pal!
The person who posted this method is my frnd on FB , whenever I tried to connect he ignored my text.
Stucked at the same..
So I was having the same error as the couple people above me, but I was able to get Reaver to recognize where my files were. I moved it off of the SD card to: /data/data/com.bcmon.bcmon
Then I manually typed in the location path of my .sh files:
/data/data/com.bcmon.bcmon/start.sh
/data/data/com.bcmon.bcmon/warm.sh
/data/data/com.bcmon.bcmon/stop.sh
Obviously you'll want to put in whatever you named those files there.
So I've gotten past that hurtle. I am however stuck with this new set of errors now, although it will allow me to progress to "start attack".
I'm new so the site is preventing me from posting these links normally but here are the two errors I'm getting:
Code:
Stdout: rfasuccess
StdErr: Control the Wi-Fi manager
usage: svc wifi [enable|disable]
Turn Wi-Fi on or off
./data/data/com.bcmon.bcmon/start.sh[4]: sh : not found
./data/data/com.bcmon.bcmon/start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : no such file or directory
.data/data/com.bcmon.bcmon/start.sh[6]: ./enable_bcmon : not found
After this I am able to progress and next see:
Code:
tmp-mksh: <stdin>[3]: sh: not found
error: only position independent executables (PIE) are supported.
Any suggestions?
- HTC One M7vzw
PacMan Rom 5.1.1
Stucked at same place
:silly::silly:
Libcap.so.1 error please sort it out soon..
Does anyone managed to solve this?
Your scripts shebang points to /bin/bash you could try changing to #!/system/bin/sh which should hopefully solve the sh not found error. More recent android versions force pie executables as a tool to help lower hack risks, the option there is to try to bypass pie systemwide or get a pie executable. Libcap error is due to the file not being present I'm not sure if your app is supposed to include it but it's not a standard android library.
Hey please help can I use in Micromax canvas nitro A310
Err msg displayed... Plzzz help
:Hi, m a general user of an android phone (without much technical skills). I have tried the method suggested step by step for using Reaver Rfa without bcmon and it enabled monitor mode but after that a popup appeared, which was as followed (unable to attach screenshot)
Stdout:
StdErr:
bmon_wrapper_loaded
K_Shell/10118:1442:<Stdin>[4]:
iwconfig:not found
I am unable to understand it. Please help
goodpeace said:
Well, i struggled for half a day relentlessly and finally got Reaver Working on my Xiaomi Mi4 android phone with a big help from the below mentioned link , everything is going good and fine, i got the Reaver app working on my Rooted app without bcmon and it worked and i'm ready to hack the network but just as i bypassed "Test Monitor" successfully(by loading a few scripts and debugging) and hit "Start Attack" this thing showed up, below i've written down the issue as it appeared since i'm not allowed to post screenshots & Links untill i make 10 posts(i'm a new user) and the scripts that i used to bypass Test Monitor are attached below, i'm basically a noob but good at technical things, the guide mentioned in the below link isn't as easy as it is told there, there are a few more steps that aren't added in the guide!!
HELP URGENTLY!!!! I waisted a whole day trying to get it working, i'd be so grateful :laugh: if you could help me out with it! PLEASE!! :crying:
Here are those scripts i loaded and put the phone on debug mode
Custom activation script:
#!/bin/bash
svc wifi disable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
Custom Warm-up Script
#!/bin/bash
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
Custom stop Script:
#!/bin/bash
svc wifi enable
echo “rfasuccess”
1. this happened first but i continued anyway.
Stdout:
"rfa success"
StdErr:
Control the Wifi manager
usage: svc wifi [enable[disable] Turn wifi on or off.
svc wifi prefer
set Wifi as the preferred data network
.//srart.shl[4]: sh :not found
.//start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : No Such File or Directory
./start.sh[6]: ./enable_bcmon : not found
2. and then this happened in the processing window
sh: <stdin>[3]: sh: not found
CANNOT LINK EXECUTABLE: could not load library "libcap.so.1" needed by "./reaver"; caused by library "libcap.so.1" not found
3. and finally when i hit stop, this message showed up
Stdout:
?rfasuccess?
StdErr:
Control the Wi-fi manager
usage: svc wifi[enable[disable]
Turn Wi-Fi on or off
svc wifi prefer
Set Wi-Fi as the preferred data network
These are the Steps i followed to get the monitoring mode done.
1.Download bcmon- (link)
2.Save the app on your sdcard but don’t install it.
3.download Reaver apk(RFA) and install it.- (link)
4.Download root explorer by speed speed software and install it.- (link)
6.Install and open bcmon app
keep it open for 5s and then press home.
(This will surely create a com.bcmon.bcmon folder in/Data/data)
7.Open root explorer and browse to the bcmon apk.
8.Select it and press view.
9.Open assets.
10.Copy all the files to /Data/data/com.bcmon.bcmon/files.
#If any file or folder of the same name is found then delete it#
/Now you’ll have to add custom scripts that I have given below(just copy them in a note editor and save with a .sh extension)
Start script-
Start script- mentioned above in custom start script
Warm script- mentioned above in custom warm up script
Stop script- mentioned above in custom stop script
#Now open root explorer
Browse to com.bcmon.bcmon/files/tools/reaver
Long press on it and press permissions and then check the execute boxes(all 3).now click OK.
Now in tools long press enable_bcmon and give it execute rights (all 3).now click OK .
#All set….now open reaver and scan for networks press on one with green color and with a good range.
Go to settings and monitor mode setting and unchek the use bcmon and load all the scripts properly.
#while loading scripts start.sh is the activation script,warm.sh is the warm up script and stop.sh is the stop script. #
Now scroll down and check the debugging mode.
#Go back to the attack screen and press test monitor mode.
Rfasuccess comes then press OK and press start attack.
#All done,now wait until it finds the routers key for you.
#This worked on my I ball slide 6318i,Alcatel ot 918n and redmi note.
Click to expand...
Click to collapse
Please explain step by step on how you did this I'm stuck. Thanks.
BiteMyCAPTCHA said:
So I was having the same error as the couple people above me, but I was able to get Reaver to recognize where my files were. I moved it off of the SD card to: /data/data/com.bcmon.bcmon
Then I manually typed in the location path of my .sh files:
/data/data/com.bcmon.bcmon/start.sh
/data/data/com.bcmon.bcmon/warm.sh
/data/data/com.bcmon.bcmon/stop.sh
Obviously you'll want to put in whatever you named those files there.
So I've gotten past that hurtle. I am however stuck with this new set of errors now, although it will allow me to progress to "start attack".
I'm new so the site is preventing me from posting these links normally but here are the two errors I'm getting:
Code:
Stdout: rfasuccess
StdErr: Control the Wi-Fi manager
usage: svc wifi [enable|disable]
Turn Wi-Fi on or off
./data/data/com.bcmon.bcmon/start.sh[4]: sh : not found
./data/data/com.bcmon.bcmon/start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : no such file or directory
.data/data/com.bcmon.bcmon/start.sh[6]: ./enable_bcmon : not found
After this I am able to progress and next see:
Code:
tmp-mksh: <stdin>[3]: sh: not found
error: only position independent executables (PIE) are supported.
Any suggestions?
- HTC One M7vzw
PacMan Rom 5.1.1
Click to expand...
Click to collapse
Dude..
This is the same error that mentioned in the post
---------- Post added at 08:54 AM ---------- Previous post was at 08:53 AM ----------
10258Smoker said:
Libcap.so.1 error please sort it out soon..
Click to expand...
Click to collapse
find out libcap.so.1 from bcmon assets and put it on system/lib
How to copy bcmon files from rootex, there's no copy option, only extract.
goodpeace said:
Well, i struggled for half a day relentlessly and finally got Reaver Working on my Xiaomi Mi4 android phone with a big help from the below mentioned link , everything is going good and fine, i got the Reaver app working on my Rooted app without bcmon and it worked and i'm ready to hack the network but just as i bypassed "Test Monitor" successfully(by loading a few scripts and debugging) and hit "Start Attack" this thing showed up, below i've written down the issue as it appeared since i'm not allowed to post screenshots & Links untill i make 10 posts(i'm a new user) and the scripts that i used to bypass Test Monitor are attached below, i'm basically a noob but good at technical things, the guide mentioned in the below link isn't as easy as it is told there, there are a few more steps that aren't added in the guide!!
HELP URGENTLY!!!! I waisted a whole day trying to get it working, i'd be so grateful :laugh: if you could help me out with it! PLEASE!! :crying:
Here are those scripts i loaded and put the phone on debug mode
Custom activation script:
#!/bin/bash
svc wifi disable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
Custom Warm-up Script
#!/bin/bash
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
Custom stop Script:
#!/bin/bash
svc wifi enable
echo “rfasuccess”
1. this happened first but i continued anyway.
Stdout:
"rfa success"
StdErr:
Control the Wifi manager
usage: svc wifi [enable[disable] Turn wifi on or off.
svc wifi prefer
set Wifi as the preferred data network
.//srart.shl[4]: sh :not found
.//start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : No Such File or Directory
./start.sh[6]: ./enable_bcmon : not found
2. and then this happened in the processing window
sh: <stdin>[3]: sh: not found
CANNOT LINK EXECUTABLE: could not load library "libcap.so.1" needed by "./reaver"; caused by library "libcap.so.1" not found
3. and finally when i hit stop, this message showed up
Stdout:
?rfasuccess?
StdErr:
Control the Wi-fi manager
usage: svc wifi[enable[disable]
Turn Wi-Fi on or off
svc wifi prefer
Set Wi-Fi as the preferred data network
These are the Steps i followed to get the monitoring mode done.
1.Download bcmon- (link)
2.Save the app on your sdcard but don’t install it.
3.download Reaver apk(RFA) and install it.- (link)
4.Download root explorer by speed speed software and install it.- (link)
6.Install and open bcmon app
keep it open for 5s and then press home.
(This will surely create a com.bcmon.bcmon folder in/Data/data)
7.Open root explorer and browse to the bcmon apk.
8.Select it and press view.
9.Open assets.
10.Copy all the files to /Data/data/com.bcmon.bcmon/files.
#If any file or folder of the same name is found then delete it#
/Now you’ll have to add custom scripts that I have given below(just copy them in a note editor and save with a .sh extension)
Start script-
Start script- mentioned above in custom start script
Warm script- mentioned above in custom warm up script
Stop script- mentioned above in custom stop script
#Now open root explorer
Browse to com.bcmon.bcmon/files/tools/reaver
Long press on it and press permissions and then check the execute boxes(all 3).now click OK.
Now in tools long press enable_bcmon and give it execute rights (all 3).now click OK .
#All set….now open reaver and scan for networks press on one with green color and with a good range.
Go to settings and monitor mode setting and unchek the use bcmon and load all the scripts properly.
#while loading scripts start.sh is the activation script,warm.sh is the warm up script and stop.sh is the stop script. #
Now scroll down and check the debugging mode.
#Go back to the attack screen and press test monitor mode.
Rfasuccess comes then press OK and press start attack.
#All done,now wait until it finds the routers key for you.
#This worked on my I ball slide 6318i,Alcatel ot 918n and redmi note.
Click to expand...
Click to collapse
Could anyone tell me how to copy bcmon assets files from sd card to data, because all the options says is extract.
Please help meeee...!
Possible Fix for libcap.so.1 problem
By moving "libcap.so.1", "libsqlite3.so.0" from "/data/data/com.bcmon.bcmon/files/libs" to "/system/lib" and setting the wifi-interface in the "Monitor-Mode settings" to "wlan0". I was able to solve the "libcap.so.1" error.
Straight afterwards, I got the "<stdin>[3] : not found" error.
By changing the "start.sh" script from :
Code:
#!/bin/bash
svc wifi disable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
--to--
Code:
#!/bin/bash
svc wifi enable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
I was able to pass the "<stdin>[3] : not found" error but now it is stuck on "Waiting for beacon from <Mac Address here>".
I've tried multiple router and waited around 15 minutes on that screen for each router with my phone next to them but it will not get pass that line.
Galaxy s3 i9300 here.
script errors
start.sh, warm.sh and stop.sh are not functioning properly, I am stuck at the same stage as you are and a can't even run the scripts on the terminal emulator.
I have tried granting permissions to the scripts but is is giving errors, if you enable "debug mode", you will see that not even one command is being issued without errors.
BatDroid said:
After this I am able to progress and next see:
Any suggestions?
- HTC One M7vzw
PacMan Rom 5.1.1
Dude..
This is the same error that mentioned in the post
---------- Post added at 08:54 AM ---------- Previous post was at 08:53 AM ----------
find out libcap.so.1 from bcmon assets and put it on system/lib
Click to expand...
Click to collapse
How do I fix the PIE problem? I'm using a Moto E LTE Surnia with CM13.
I cant copy files from extracted folder/asset folder of "bcmon" from any root explorer even from premium root explorer by speedspeed software. Please help me with this. Thank you in advance.
No app in market that can hack wifi password.
Don't waste time.
New wifi routers have WPA 2PSK highest security current time. To crack this type of password may take 2 mintues to many of years depend on which type of character and length have been chosen. All the procedure of cracking password done on linux platform.
In my opinion there are lots of apps on playstore are fake promising to crack wifi password.
Because wifi wpa2psk generate new reandoms keys with 24 or more characters changes with time to time (2-5 sec). And this keys doesn't not save in android in any way. So, how can you say this app hack wifi passwords.
If wifi router has WEP protected security then it can be easily cracked in 2 min any password.
Intro
This howto will explain how to sideload *.tpk and *.wgt applications on your Gear Fit2. It'll also cover how to re-sign the application with your own certificates. This can be required if the application does not include a signature that's valid for your particular Gear Fit2. For example, this would be the case for applications that haven't been accepted to the Galaxy Apps store.
Warning
Unless we get people to develop and share their applications for the Gear Fit2, essentially all applications will have been developed for a different device. This means you'll run into varying degrees of incompatibility. Even if the application installs, there's no guarantee it will run. And even if it does run, it may be a terrible experience. And please show some caution regarding what you attempt to install, I don't take responsibility if you break anything following the guide.
Getting your own author and distributor certificates for your Gear Fit2
In order to sign applications, you need an author and distributor certificate for our Gear Fit2 device. For applications on the Galaxy Apps store, Samsung would be the one who signs applications with a distributor certificate. Since you will be sideloading applications, there's no guarantee they contain a valid signature from Samsung. You there need your own distributor certificate. This certificate will only be valid for signing applications for your particular Gear Fit2, which is why I can't make one for you. However you'll only have to do this once and can uninstall Tizen Studio after you're done. Unless you want to develop applications for the Gear Fit2, of course.
Things to download
Java SE Development Kit 8
Tizen Studio 1.2 with IDE installer
Tizen Studio setup
To install, simply accept the software licence agreement and install both the Tizen SDK and data in their default locations.
After installation, Tizen Studio Package Manager should automatically launch. If not, launch Tizen Studio and choose Tools->Package Manager. In the Package Manager you choose the Extension SDK tab and install Samsung Certificate Extension. When it has been installed, close the window and launch Tizen Studio. Press OK for default workspace location.
Connect Gear Fit2 to Tizen Studio
On your Gear Fit2: Got to Settings->Gear info and turn on Debugging. Then go to Settings->Connections. Here you make sure Wi-Fi is turned on and logged on to the same Wi-Fi network as your Windows computer and that Bluetooth is turned off. The Gear Fit2 tend to automatically log off Wi-Fi networks if its connected through Bluetooth. While you can have both on if you're quick, simply turning off Bluetooth leads to much less frustration. You may have to restart your Gear Fit2 at this point to get everything working.
In Tizen Studio, you should see a drop-down list in the tool bar saying No Target. Open the drop-down list and choose Launch remote device manager. Here you press Scan and wait for your device's IP address to appear. You'll only see Tizen devices, so unless you have multiple, there will only be one result. If it doesn't appear, repeat the process above. On the toggle under Connect, turn it from off to on. On your Gear Fit2 it should say RSA key fingerprint: .... You accept on the device and should now be connected. Close down the Remote Device Manager window. The drop-down list should now say SM-R360 ....
Now you choose the menu item Tools->Certificate Manager. Add a new certificate profile by pressing the "+" sign up to the right and then select SAMSUNG as the type for your certificate profile. Go through the 4 tabs as follows
Device Type
Choose Mobile/Wearable and press next.
Certificate Profile
Choose Create a new certificate profile and type any name you want. Press next.
Author Certificate
Choose Create a new author certificate and press next.
Type in an author name and password. Make sure you remember the password as it will be needed for signing applications later on.
You'll now be asked to sign in to your Samsung account. If you don't have one, choose Create new account and follow instructions.
After you've signed in you should get a Congratulations! notice. Take note of the location of the author certificate and press next
Distributor Certificate
Choose Create new distributor certificate and press next.
For Privilege choose Partner. This defines how much of the Tizen API the applications you'll be signing are allowed to access. The three levels are Public, Partner and Platform with Platform being the highest level of access. Unfortunately that's not available to us, so we choose Partner.
IMPORTANT: Leave the password as it is.
Under the section Add individual DUIDs you should find the first entry contains something that starts with 2.0#.... That's your Gear Fit2's DUID. If you don't see it, press cancel (sorry) and go back to the Connect Gear Fit2 to Tizen Studio section above. If you do see, it press next. Make a note of the location of the distributor certificate. This should be the same as the author certificate from above. Then press Finish and you're done.
Signing and installing applications on your Gear Fit2
Things to download (See attachments to the post)
Fit2Installer
PacMan
We'll use PacMan as an example. It's a modified version of the PacMan application found in this xda post. Some of the other applications in that link work on the Gear Fit2, some don't.
Using Fit2Installer
Download and extract the Fit2Installer. The folder contains the following.
sdb.exe: Smart Development Bridge for Tizen devices. This allows us to connect to the device and install applications. See tizen.developer.org's sdb section for more information on what you can do with it.
7zipcli: The open source a command-line archiver from 7-zip. Used to package applications.
tizen: A very stripped down version of Tizen Studio that only contains the required files for signing and packaging applications.
cert: Empty folder where you're supposed to place your own certificates.
sign_me: Empty folder where you place applications you want to be signed.
install_me: Empty folder where you place applications you want to be installed on your device.
sign.bat: Batch script that will sign the applications put in sign_me
sign.bat: Batch script that will connect your Gear Fit2 to your computer, allowing you to install applications.
install.bat: Batch script that will install the applications put in install_me
connect.bat: Batch script that will connect to your Gear Fit2.
disconnect.bat: Batch script that will disconnect from your Gear Fit2.
Setting up your certificates
Go to the location of the certificates you generated with the Certificate Manager. The standard location is in your user folder under ~\SamsungCertificate\<name of cert profile>. The folder should contain 9 files. Copy all those directly into the .\Fit2Installer\cert\ folder. Eg, distributor.p12 should be placed as .\Fit2Installer\cert\distributor.p12.
Signing applications
There are two ways of using the sign.bat script.
Place a *.tpk or *.wgt file directly in the sign_me folder. Run the sign.bat script and type in the password you chose for your certificate earlier. If successful, this will produce a *.tpk or *.wgt file in the install_me folder.
If you don't have the package file, but rather just a folder containing the files for the application you'll have to place that folder in sign_me. For *.tpk files, this means the path will be .\Fit2Installer\sign_me\<application_folder>\tizen-manifest.xml. For *wgt files it will be .\Fit2Installer\sign_me\<application_folder>\config.xml. Now, run the sign.bat script and type in your certificate password.
As an example, I've attached PacMan. PacMan is a web-app that was packaged for the Gear S2. In order to get it to fit the Gear Fit2 screen, I had to extract the PacMan.wgt file and make a few changes to the code. Changes to the files invalidates the signature, so I had to resign it using my own certificates. If you've everything set up correctly, this should be fairly simple for you to do too.
Extract the PacMan.zip archive and place the content in the folder .\Fit2Installer\sign_me\PacMan\ and run the sign.bat script. Look in the install_me folder to check there's a *.wgt file for PacMan.
Installing applications
As in the earlier section Connect Gear Fit2 to Tizen Studio, make sure you're on Wi-Fi, bluetooth is off and debugging in turned on. Also, make sure you only have one Tizen device connected to your computer (this includes Tizen emulators).
Run the connect.bat script and type in the IP address of your Gear Fit2. If you do not know the IP address, you can find it on the device under Settings->Connections->Wi-Fi->Wi-Fi networks-><wifi_name> and at the bottom of the list. Make sure you allow sdb.exe through your firewall.
Important responses are:
error: failed to connect to remote target <ip address>
Make sure you've set up your device correctly. Try turning Wi-Fi off and on. Or even a reboot of the device.
device unauthorized. Please approve on your device.
This may mean you have to accept the RSA key fingerprint on your Gear Fit2. However, there appears to be a bug in the sdb that causes this to happen regardless. Try to run the script twice and see if you get the message below:
<ip address>:26101 is already connected
Now you know for sure your device is connected.
After you've connected, you can safely turn Bluetooth back on. Remember to run disconnect.bat when you're done installing applications. Your Gear Fit2 will otherwise stay connected and drain a lot of battery.
Similarly to using the sign.bat script, there are two ways of using the install.bat script. Both of them require the application to already have a valid signature.
Place a *.tpk or *.wgt file directly in the install_me folder. Run the install.bat script.
If you don't have the package file, but rather just a folder containing the application you'll have to place that folder in install_me. For *.tpk files, this means the path will be .\Fit2Installer\install_me\<application_folder>\tizen-manifest.xml. For *wgt files it will be .\Fit2Installer\install_me\<application_folder>\config.xml.. Run the install.bat script.
Since PacMan should already be signed and placed correctly in the install_me folder, you can now run the install.bat script to install it on your Gear Fit2.
LeJay said:
Intro
This howto will explain how to sideload *.tpk and *.wgt applications on your Gear Fit2. It'll also cover how to re-sign the application with your own certificates. This can be required if the application does not include a signature that's valid for your particular Gear Fit2. For example, this would be the case for applications that haven't been accepted to the Galaxy Apps store.
Warning
Unless we get people to develop and share their applications for the Gear Fit2, essentially all applications will have been developed for a different device. This means you'll run into varying degrees of incompatibility. Even if the application installs, there's no guarantee it will run. And even if it does run, it may be a terrible experience. And please show some caution regarding what you attempt to install, I don't take responsibility if you break anything following the guide.
Getting your own author and distributor certificates for your Gear Fit2
In order to sign applications, you need an author and distributor certificate for our Gear Fit2 device. For applications on the Galaxy Apps store, Samsung would be the one who signs applications with a distributor certificate. Since you will be sideloading applications, there's no guarantee they contain a valid signature from Samsung. You there need your own distributor certificate. This certificate will only be valid for signing applications for your particular Gear Fit2, which is why I can't make one for you. However you'll only have to do this once and can uninstall Tizen Studio after you're done. Unless you want to develop applications for the Gear Fit2, of course.
Things to download
Java SE Development Kit 8
Tizen Studio 1.2 with IDE installer
Tizen Studio setup
To install, simply accept the software licence agreement and install both the Tizen SDK and data in their default locations.
After installation, Tizen Studio Package Manager should automatically launch. If not, launch Tizen Studio and choose Tools->Package Manager. In the Package Manager you choose the Extension SDK tab and install Samsung Certificate Extension. When it has been installed, close the window and launch Tizen Studio. Press OK for default workspace location.
Connect Gear Fit2 to Tizen Studio
On your Gear Fit2: Got to Settings->Gear info and turn on Debugging. Then go to Settings->Connections. Here you make sure Wi-Fi is turned on and logged on to the same Wi-Fi network as your Windows computer and that Bluetooth is turned off. The Gear Fit2 tend to automatically log off Wi-Fi networks if its connected through Bluetooth. While you can have both on if you're quick, simply turning off Bluetooth leads to much less frustration. You may have to restart your Gear Fit2 at this point to get everything working.
In Tizen Studio, you should see a drop-down list in the tool bar saying No Target. Open the drop-down list and choose Launch remote device manager. Here you press Scan and wait for your device's IP address to appear. You'll only see Tizen devices, so unless you have multiple, there will only be one result. If it doesn't appear, repeat the process above. On the toggle under Connect, turn it from off to on. On your Gear Fit2 it should say RSA key fingerprint: .... You accept on the device and should now be connected. Close down the Remote Device Manager window. The drop-down list should now say SM-R360 ....
Now you choose the menu item Tools->Certificate Manager. Add a new certificate profile by pressing the "+" sign up to the right and then select SAMSUNG as the type for your certificate profile. Go through the 4 tabs as follows
Device Type
Choose Mobile/Wearable and press next.
Certificate Profile
Choose Create a new certificate profile and type any name you want. Press next.
Author Certificate
Choose Create a new author certificate and press next.
Type in an author name and password. Make sure you remember the password as it will be needed for signing applications later on.
You'll now be asked to sign in to your Samsung account. If you don't have one, choose Create new account and follow instructions.
After you've signed in you should get a Congratulations! notice. Take note of the location of the author certificate and press next
Distributor Certificate
Choose Create new distributor certificate and press next.
For Privilege choose Partner. This defines how much of the Tizen API the applications you'll be signing are allowed to access. The three levels are Public, Partner and Platform with Platform being the highest level of access. Unfortunately that's not available to us, so we choose Partner.
IMPORTANT: Leave the password as it is.
Under the section Add individual DUIDs you should find the first entry contains something that starts with 2.0#.... That's your Gear Fit2's DUID. If you don't see it, press cancel (sorry) and go back to the Connect Gear Fit2 to Tizen Studio section above. If you do see, it press next. Make a note of the location of the distributor certificate. This should be the same as the author certificate from above. Then press Finish and you're done.
Signing and installing applications on your Gear Fit2
Things to download (See attachments to the post)
Fit2Installer
PacMan
We'll use PacMan as an example. It's a modified version of the PacMan application found in this xda post. Some of the other applications in that link work on the Gear Fit2, some don't.
Using Fit2Installer
Download and extract the Fit2Installer. The folder contains the following.
sdb.exe: Smart Development Bridge for Tizen devices. This allows us to connect to the device and install applications. See tizen.developer.org's sdb section for more information on what you can do with it.
7zipcli: The open source a command-line archiver from 7-zip. Used to package applications.
tizen: A very stripped down version of Tizen Studio that only contains the required files for signing and packaging applications.
cert: Empty folder where you're supposed to place your own certificates.
sign_me: Empty folder where you place applications you want to be signed.
install_me: Empty folder where you place applications you want to be installed on your device.
sign.bat: Batch script that will sign the applications put in sign_me
sign.bat: Batch script that will connect your Gear Fit2 to your computer, allowing you to install applications.
install.bat: Batch script that will install the applications put in install_me
connect.bat: Batch script that will connect to your Gear Fit2.
disconnect.bat: Batch script that will disconnect from your Gear Fit2.
Setting up your certificates
Go to the location of the certificates you generated with the Certificate Manager. The standard location is in your user folder under ~\SamsungCertificate\<name of cert profile>. The folder should contain 9 files. Copy all those directly into the .\Fit2Installer\cert\ folder. Eg, distributor.p12 should be placed as .\Fit2Installer\cert\distributor.p12.
Signing applications
There are two ways of using the sign.bat script.
Place a *.tpk or *.wgt file directly in the sign_me folder. Run the sign.bat script and type in the password you chose for your certificate earlier. If successful, this will produce a *.tpk or *.wgt file in the install_me folder.
If you don't have the package file, but rather just a folder containing the files for the application you'll have to place that folder in sign_me. For *.tpk files, this means the path will be .\Fit2Installer\sign_me\<application_folder>\tizen-manifest.xml. For *wgt files it will be .\Fit2Installer\sign_me\<application_folder>\config.xml. Now, run the sign.bat script and type in your certificate password.
As an example, I've attached PacMan. PacMan is a web-app that was packaged for the Gear S2. In order to get it to fit the Gear Fit2 screen, I had to extract the PacMan.wgt file and make a few changes to the code. Changes to the files invalidates the signature, so I had to resign it using my own certificates. If you've everything set up correctly, this should be fairly simple for you to do too.
Extract the PacMan.zip archive and place the content in the folder .\Fit2Installer\sign_me\PacMan\ and run the sign.bat script. Look in the install_me folder to check there's a *.wgt file for PacMan.
Installing applications
As in the earlier section Connect Gear Fit2 to Tizen Studio, make sure you're on Wi-Fi, bluetooth is off and debugging in turned on. Also, make sure you only have one Tizen device connected to your computer (this includes Tizen emulators).
Run the connect.bat script and type in the IP address of your Gear Fit2. If you do not know the IP address, you can find it on the device under Settings->Connections->Wi-Fi->Wi-Fi networks-><wifi_name> and at the bottom of the list. Make sure you allow sdb.exe through your firewall.
Important responses are:
error: failed to connect to remote target <ip address>
Make sure you've set up your device correctly. Try turning Wi-Fi off and on. Or even a reboot of the device.
device unauthorized. Please approve on your device.
This may mean you have to accept the RSA key fingerprint on your Gear Fit2. However, there appears to be a bug in the sdb that causes this to happen regardless. Try to run the script twice and see if you get the message below:
<ip address>:26101 is already connected
Now you know for sure your device is connected.
After you've connected, you can safely turn Bluetooth back on. Remember to run disconnect.bat when you're done installing applications. Your Gear Fit2 will otherwise stay connected and drain a lot of battery.
Similarly to using the sign.bat script, there are two ways of using the install.bat script. Both of them require the application to already have a valid signature.
Place a *.tpk or *.wgt file directly in the install_me folder. Run the install.bat script.
If you don't have the package file, but rather just a folder containing the application you'll have to place that folder in install_me. For *.tpk files, this means the path will be .\Fit2Installer\install_me\<application_folder>\tizen-manifest.xml. For *wgt files it will be .\Fit2Installer\install_me\<application_folder>\config.xml.. Run the install.bat script.
Since PacMan should already be signed and placed correctly in the install_me folder, you can now run the install.bat script to install it on your Gear Fit2.
Click to expand...
Click to collapse
It may work on gear s? Tizen is linux kernel isn't it? I starting my little steps on code thanks for your explanetion...
Sent from my SM-G955F using Tapatalk
Few months tooo late...
Somebody tested this solution successfully?
I wish to insert the Certs for Public, Partner and Platform...
https://forum.xda-developers.com/showpost.php?p=76472787&postcount=509
:angel:
I am using since years my SM-Z130H, RD-PQ and now SM-Z300H for signing easily...
But as Windows Fan Boy maybe Windows solution would be nice. :angel:
I will later add info where I have problems... maybe only path wrong...
Best Regards
Code:
D:\Fit2Installer>sign.bat
Enter certificate password: test
Setting configuration is succeeded....
No exist the default path of security profiles.
[COLOR="Red"][B]Specified file not found: ..\..\..\..\..\cert\author.p12[/B][/COLOR]
7-Zip (A) 9.20 Copyright (c) 1999-2010 Igor Pavlov 2010-11-18
Scanning
Creating archive ..\PacMan_zip.zip
Compressing audio\die.mp3
Compressing audio\die.ogg
Compressing audio\eatghost.mp3
Compressing audio\eatghost.ogg
Compressing audio\eating.mp3
Compressing audio\eating.ogg
Compressing audio\eating.short.mp3
Compressing audio\eating.short.ogg
Compressing audio\eatpill.mp3
Compressing audio\eatpill.ogg
Compressing audio\extra lives.mp3
Compressing audio\extra lives.ogg
Compressing audio\intermission.mp3
Compressing audio\intermission.ogg
Compressing audio\opening_song.mp3
Compressing audio\opening_song.ogg
Compressing audio\siren.mp3
Compressing audio\siren.ogg
Compressing audio\vcs_90.mp3
Compressing audio\vcs_90.ogg
Compressing BD_Cartoon_Shout-webfont.ttf
Compressing config.xml
Compressing icon.png
Compressing index.html
Compressing jquery-1.9.1.js
Compressing LICENSE
Compressing modernizr-1.5.min.js
Compressing pacman.js
Compressing screenshots\pacman1.png
Compressing screenshots\pacman2.png
Compressing screenshots\pacman3.png
Compressing screenshots\pacman4.png
Everything is Ok
1 Datei(en) verschoben.
Exception in thread "main" java.lang.NoClassDefFoundError: org/eclipse/osgi/util/NLS
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at org.tizen.ncli.subcommands.sign.SignCLICommand.validateProfilesPath(SignCLICommand.java:120)
at org.tizen.ncli.subcommands.sign.SignCLICommand.call(SignCLICommand.java:63)
at org.tizen.ncli.subcommands.sign.SignCLICommand.call(SignCLICommand.java:48)
at org.tizen.ncli.subcommands.AbstractSubCommand.runCommand(AbstractSubCommand.java:85)
at org.tizen.ncli.ide.shell.PackageCLI.doRepackageForWgt(PackageCLI.java:470)
at org.tizen.ncli.ide.shell.PackageCLI.doPackageForWgt(PackageCLI.java:715)
at org.tizen.ncli.ide.shell.PackageCLI.execute(PackageCLI.java:1056)
at org.tizen.ncli.ide.shell.AbstractCLI.execute(AbstractCLI.java:92)
at org.tizen.ncli.ide.shell.Main.run(Main.java:144)
at org.tizen.ncli.ide.shell.Main.main(Main.java:78)
Caused by: java.lang.ClassNotFoundException: org.eclipse.osgi.util.NLS
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
... 22 more
Drücken Sie eine beliebige Taste . . .
Will try to set Path manually...
Maybe my fault...
Best Regards
adfree said:
Code:
D:\Fit2Installer>sign.bat
Enter certificate password: test
Setting configuration is succeeded....
No exist the default path of security profiles.
[COLOR="Red"][B]Specified file not found: ..\..\..\..\..\cert\author.p12[/B][/COLOR]
7-Zip (A) 9.20 Copyright (c) 1999-2010 Igor Pavlov 2010-11-18
Scanning
Creating archive ..\PacMan_zip.zip
Compressing audio\die.mp3
Compressing audio\die.ogg
Compressing audio\eatghost.mp3
Compressing audio\eatghost.ogg
Compressing audio\eating.mp3
Compressing audio\eating.ogg
Compressing audio\eating.short.mp3
Compressing audio\eating.short.ogg
Compressing audio\eatpill.mp3
Compressing audio\eatpill.ogg
Compressing audio\extra lives.mp3
Compressing audio\extra lives.ogg
Compressing audio\intermission.mp3
Compressing audio\intermission.ogg
Compressing audio\opening_song.mp3
Compressing audio\opening_song.ogg
Compressing audio\siren.mp3
Compressing audio\siren.ogg
Compressing audio\vcs_90.mp3
Compressing audio\vcs_90.ogg
Compressing BD_Cartoon_Shout-webfont.ttf
Compressing config.xml
Compressing icon.png
Compressing index.html
Compressing jquery-1.9.1.js
Compressing LICENSE
Compressing modernizr-1.5.min.js
Compressing pacman.js
Compressing screenshots\pacman1.png
Compressing screenshots\pacman2.png
Compressing screenshots\pacman3.png
Compressing screenshots\pacman4.png
Everything is Ok
1 Datei(en) verschoben.
Exception in thread "main" java.lang.NoClassDefFoundError: org/eclipse/osgi/util/NLS
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at org.tizen.ncli.subcommands.sign.SignCLICommand.validateProfilesPath(SignCLICommand.java:120)
at org.tizen.ncli.subcommands.sign.SignCLICommand.call(SignCLICommand.java:63)
at org.tizen.ncli.subcommands.sign.SignCLICommand.call(SignCLICommand.java:48)
at org.tizen.ncli.subcommands.AbstractSubCommand.runCommand(AbstractSubCommand.java:85)
at org.tizen.ncli.ide.shell.PackageCLI.doRepackageForWgt(PackageCLI.java:470)
at org.tizen.ncli.ide.shell.PackageCLI.doPackageForWgt(PackageCLI.java:715)
at org.tizen.ncli.ide.shell.PackageCLI.execute(PackageCLI.java:1056)
at org.tizen.ncli.ide.shell.AbstractCLI.execute(AbstractCLI.java:92)
at org.tizen.ncli.ide.shell.Main.run(Main.java:144)
at org.tizen.ncli.ide.shell.Main.main(Main.java:78)
Caused by: java.lang.ClassNotFoundException: org.eclipse.osgi.util.NLS
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
... 22 more
Drücken Sie eine beliebige Taste . . .
Will try to set Path manually...
Maybe my fault...
Best Regards
Click to expand...
Click to collapse
yes, i also had to change the paths manually in the sign.bat file; and then it works - on gear s3, tizen 3.0.0.2
@stakoz
Please, can you post your changes?
Thanx in advance.
Best Regards
Hi adfree
I have placed the unzipped "Fit2Installer" folder in the main tree C:\Fit2Installer
(this is Windows 10 on a Virtual Machine on a Mac)
As per the instructions have already copy pasted the certificates made with Tizen Studio in C:\Fit2Installer\cert
Below is the contents of my "sign.bat" file relating to above path
And further below is also the output window of cmd.exe having run the "sign.bat" file for "waldo_transl.wgt" that was placed in the "sign_me" subfolder
There is something about security profile.xml path, which i also tried to address by editing the default profile path in the "tizen cli-config" file, but it always comes back as before, so left it as it was, as it still works.
Finally I also shared with all my PC users the read/write rights for the "Fit2Installer" folder just in case, as described in the instructions for the "Tizen Studio" folder too
Hope this helps
+++
contents of my modified "sign.bat" :
+++
@Echo off
set /p pass="Enter certificate password: "
call C:\Fit2Installer\tizen\tizen-studio\tools\ide\bin\tizen.bat cli-config -- .\tizen "default.profiles.path=..\..\..\..\profiles.xml"
call C:\Fit2Installer\tizen\tizen-studio\tools\ide\bin\tizen.bat security-profiles add -- .\tizen -f -n MyProfile -a C:\Fit2Installer\cert\author.p12 -p %pass% -d C:\Fit2Installer\cert\distributor.p12 -dp %pass%
for %%f in (.\sign_me\*.tpk) do (
call C:\Fit2Installer\tizen\tizen-studio\tools\ide\bin\tizen.bat package -t tpk -s MyProfile -- "%%f" -o C:\Fit2Installer\install_me\
)
for %%f in (.\sign_me\*.wgt) do (
call C:\Fit2Installer\tizen\tizen-studio\tools\ide\bin\tizen.bat package -t wgt -s MyProfile -- "%%f" -o C:\Fit2Installer\install_me\
)
for /D %%d in (.\sign_me\*) do (
IF EXIST %%d\config.xml (
cd %%d
call "C:\Fit2Installer\7zipcli\7za.exe" a "..\%%~nd_zip.zip" *
cd ..
move "%%~nd_zip.zip" "%%~nd_wgt.wgt"
cd ..
call C:\Fit2Installer\tizen\tizen-studio\tools\ide\bin\tizen.bat package -t wgt -s MyProfile -- ".\sign_me\%%~nd_wgt.wgt" -o C:\Fit2Installer\install_me\
del ".\sign_me\%%~nd_wgt.wgt"
) ELSE (
IF EXIST %%d\tizen-manifest.xml (
cd %%d
call "C:\Fit2Installer\7zipcli\7za.exe" a "..\%%~nd_zip.zip" *
cd ..
move "%%~nd_zip.zip" "%%~nd_tpk.tpk"
cd ..
call C:\Fit2Installer\tizen\tizen-studio\tools\ide\bin\tizen.bat package -t tpk -s MyProfile -- ".\sign_me\%%~nd_tpk.tpk" -o C:\Fit2Installer\install_me\
del ".\sign_me\%%~nd_tpk.tpk"
)
)
)
pause
+++
contents of the output window of cmd.exe having run above sign.bat file :
+++
Enter certificate password: password
Setting configuration is succeeded....
Loaded in 'C:\Fit2Installer\tizen\profiles.xml'.
Security profiles have a specified profile. Will be overwritten.
author path: C:\Fit2Installer\cert\author.p12
author password: *********
distributor1 path: C:\Fit2Installer\cert\distributor.p12
distributor1 password: *********
Wrote to 'C:\Fit2Installer\tizen\profiles.xml'.
Succeed to add 'MyProfile' profile.
If want to sign by this, add the file of security profiles in CLI configuration
like 'tizen cli-config "profiles.path=C:\Fit2Installer\tizen\profiles.xml"'.
Author certficate: C:\Fit2Installer\cert\author.p12
Distributor1 certificate : C:\Fit2Installer\cert\distributor.p12
Package( C:\Fit2Installer\install_me\waldo_transl.wgt ) is created successfully.
Press any key to continue . . .
+++
The query I had is resolved after going through the complete thread, so this post is irrelevant. However, I might as well use this opportunity to thank those who have contributed to this as the guide works fine.
Hey, i would like to take this opportunity and thank you for this really useful guide. Everything works fine, but I would like to ask you about the changes you did to the .wgt in order to get the screen shape right, because most of the apps are either cut in half or really small.
I cant generate distributors certificate!
davesidd said:
I cant generate distributors certificate!
Click to expand...
Click to collapse
You need to download the wearable extension in the package manager.
Namenlos55555 said:
You need to download the wearable extension in the package manager.
Click to expand...
Click to collapse
the distribution certificate gets generated automatically and it is password protected, so cant use it
working great!
Games
Are there any more games for the gear fit 2 i can download. Any help would be appreciated
Unable to open Certificate Manager
Never mind got it fixed.
Browser possible?
Have you found a way to make a browser possible using this method?
Code:
Enter certificate password: topsecret
Setting configuration is succeeded....
Loaded in 'C:\Fit2Installer\tizen\profiles.xml'.
Security profiles have a specified profile. Will be overwritten.
author path: C:\Fit2Installer\tizen\tizen-studio\tools\ide\bin\..\..\..\..\..\cert\author.p12
author password: ****
distributor1 path: C:\Fit2Installer\tizen\tizen-studio\tools\ide\bin\..\..\..\..\..\cert\distributor.p12
distributor1 password: ****
Wrote to 'C:\Fit2Installer\tizen\profiles.xml'.
Succeed to add 'MyProfile' profile.
If want to sign by this, add the file of security profiles in CLI configuration
like 'tizen cli-config "profiles.path=C:\Fit2Installer\tizen\profiles.xml"'.
Author certficate: C:\Fit2Installer\tizen\tizen-studio\tools\ide\bin\..\..\..\..\..\cert\author.p12
Distributor1 certificate : C:\Fit2Installer\tizen\tizen-studio\tools\ide\bin\..\..\..\..\..\cert\distributor.p12
Package( C:\Fit2Installer\install_me\publicTEST_fake_v12.tpk ) is created successfully.
Drücken Sie eine beliebige Taste . . .
I am using this solution since few days... without Modification. :good: :good:
With Tizen 4 Firmware on SM-R760... and Certs from Tizen Studio 3.1.
Windows 7
Thank you very much. :good: :good:
Best Regards
Hello,
I cannot sign anything, I get errors in cli.log.
Could you help me fixing these?
Cli.log:
2019-02-24 10:56:51,523 [TRACE] Main.java(90) - Start running Tizen CLI Main class...
2019-02-24 10:56:51,526 [TRACE] Main.java(91) - Argument count:6
2019-02-24 10:56:51,533 [TRACE] ConfigCLI.java(52) - setConfigProperty default.profiles.path=..\..\..\..\profiles.xml
2019-02-24 10:56:51,533 [TRACE] ConfigCLI.java(78) - Execute configCLI...
2019-02-24 10:56:52,034 [TRACE] Main.java(90) - Start running Tizen CLI Main class...
2019-02-24 10:56:52,037 [TRACE] Main.java(91) - Argument count:17
2019-02-24 10:56:52,049 [TRACE] SecurityProfilesCLI.java(56) - Begin SecuriyProfilesCLI...
2019-02-24 10:56:52,741 [TRACE] SecurityProfilesCLI.java(66) - Finish SecuriyProfilesCLI...
2019-02-24 10:56:53,196 [TRACE] Main.java(90) - Start running Tizen CLI Main class...
2019-02-24 10:56:53,198 [TRACE] Main.java(91) - Argument count:11
2019-02-24 10:56:53,209 [TRACE] PackageCLI.java(981) - Execute PackageCLI...
2019-02-24 10:56:53,212 [TRACE] PackageCLI.java(983) - getRealWorkingPath: C:\Users\Hex\Desktop\S3Watchfaces\appswgt\Fit2Installer_freedials\sign_me\pilot.wgt
2019-02-24 10:56:53,213 [TRACE] PackageCLI.java(452) - Re-packaging wgt file C:\Users\Hex\Desktop\S3Watchfaces\appswgt\Fit2Installer_freedials\sign_me\pilot.wgt
2019-02-24 10:56:53,530 [ERROR] AbstractCLI.java(94) - java.util.zip.ZipException: invalid entry size (expected 61948 but got 61958 bytes)
java.lang.IllegalStateException: java.util.zip.ZipException: invalid entry size (expected 61948 but got 61958 bytes)
at org.tizen.common.core.command.policy.UncaughtExceptionHandlingPolicy.uncaughtException(UncaughtExceptionHandlingPolicy.java:84)
at org.tizen.common.core.command.Executor.execute(Executor.java:179)
at org.tizen.common.core.command.Executor.execute(Executor.java:150)
at org.tizen.ncli.ide.shell.PackageCLI.doRepackageForWgt(PackageCLI.java:463)
at org.tizen.ncli.ide.shell.PackageCLI.doPackageForWgt(PackageCLI.java:715)
at org.tizen.ncli.ide.shell.PackageCLI.execute(PackageCLI.java:1056)
at org.tizen.ncli.ide.shell.AbstractCLI.execute(AbstractCLI.java:92)
at org.tizen.ncli.ide.shell.Main.run(Main.java:144)
at org.tizen.ncli.ide.shell.Main.main(Main.java:78)
Caused by: java.util.zip.ZipException: invalid entry size (expected 61948 but got 61958 bytes)
at java.util.zip.ZipInputStream.readEnd(Unknown Source)
at java.util.zip.ZipInputStream.read(Unknown Source)
at java.io.FilterInputStream.read(Unknown Source)
at org.tizen.common.util.IOUtil.redirect(IOUtil.java:149)
at org.tizen.common.file.StandardFileHandler.write(StandardFileHandler.java:283)
at org.tizen.common.core.command.zip.ZipExtrCommand.run(ZipExtrCommand.java:116)
at org.tizen.common.core.command.Executor.execute(Executor.java:164)
... 7 more
2019-02-24 10:56:53,532 [ERROR] Main.java(152) - java.util.zip.ZipException: invalid entry size (expected 61948 but got 61958 bytes)
Click to expand...
Click to collapse
Need solution to create Distributor Cert with Platform Privilege...
Tizen Studio only shows:
Code:
Public
Partner
Maybe via Command Line?
My old trick at the moment not work anymore in Tizen 3... 4...
Because DUID required to be written into Cert...
Please help. :angel:
Best Regards
I am using Platform Cert"s" from Hash-Signer... so at the moment only usefull in Combination Firmware... for me...
https://forum.xda-developers.com/showpost.php?p=79416572&postcount=751
But I made 2 new edited Batch Files for me...
1 can handle 2 different Passwords... for athor and Distributor Cert... the second Batch contains the Passwords...
Code:
@echo off
set /p pass="Enter Author certificate password: "
set /p pass2="Enter Distributor certificate password: "
call tizen\tizen-studio\tools\ide\bin\tizen.bat cli-config -- .\tizen "default.profiles.path=..\..\..\..\profiles.xml"
call tizen\tizen-studio\tools\ide\bin\tizen.bat security-profiles add -- .\tizen -f -n MyProfile -a ..\..\..\..\..\cert\author.p12 -p %pass% -d ..\..\..\..\..\cert\distributor.p12 -dp %pass2%
for %%f in (.\sign_me\*.tpk) do (
call tizen\tizen-studio\tools\ide\bin\tizen.bat package -t tpk -s MyProfile -- "%%f" -o .\install_me\
)
for %%f in (.\sign_me\*.wgt) do (
call tizen\tizen-studio\tools\ide\bin\tizen.bat package -t wgt -s MyProfile -- "%%f" -o .\install_me\
)
for /D %%d in (.\sign_me\*) do (
IF EXIST %%d\config.xml (
cd %%d
call "..\..\7zipcli\7za.exe" a "..\%%~nd_zip.zip" *
cd ..
move "%%~nd_zip.zip" "%%~nd_wgt.wgt"
cd ..
call tizen\tizen-studio\tools\ide\bin\tizen.bat package -t wgt -s MyProfile -- ".\sign_me\%%~nd_wgt.wgt" -o .\install_me\
del ".\sign_me\%%~nd_wgt.wgt"
) ELSE (
IF EXIST %%d\tizen-manifest.xml (
cd %%d
call "..\..\7zipcli\7za.exe" a "..\%%~nd_zip.zip" *
cd ..
move "%%~nd_zip.zip" "%%~nd_tpk.tpk"
cd ..
call tizen\tizen-studio\tools\ide\bin\tizen.bat package -t tpk -s MyProfile -- ".\sign_me\%%~nd_tpk.tpk" -o .\install_me\
del ".\sign_me\%%~nd_tpk.tpk"
)
)
)
pause
and
Code:
@echo off
call tizen\tizen-studio\tools\ide\bin\tizen.bat cli-config -- .\tizen "default.profiles.path=..\..\..\..\profiles.xml"
call tizen\tizen-studio\tools\ide\bin\tizen.bat security-profiles add -- .\tizen -f -n MyProfile -a ..\..\..\..\..\cert\author.p12 -p tizenauthor -d ..\..\..\..\..\cert\distributor.p12 -dp tizenpkcs12passfordsigner
for %%f in (.\sign_me\*.tpk) do (
call tizen\tizen-studio\tools\ide\bin\tizen.bat package -t tpk -s MyProfile -- "%%f" -o .\install_me\
)
for %%f in (.\sign_me\*.wgt) do (
call tizen\tizen-studio\tools\ide\bin\tizen.bat package -t wgt -s MyProfile -- "%%f" -o .\install_me\
)
for /D %%d in (.\sign_me\*) do (
IF EXIST %%d\config.xml (
cd %%d
call "..\..\7zipcli\7za.exe" a "..\%%~nd_zip.zip" *
cd ..
move "%%~nd_zip.zip" "%%~nd_wgt.wgt"
cd ..
call tizen\tizen-studio\tools\ide\bin\tizen.bat package -t wgt -s MyProfile -- ".\sign_me\%%~nd_wgt.wgt" -o .\install_me\
del ".\sign_me\%%~nd_wgt.wgt"
) ELSE (
IF EXIST %%d\tizen-manifest.xml (
cd %%d
call "..\..\7zipcli\7za.exe" a "..\%%~nd_zip.zip" *
cd ..
move "%%~nd_zip.zip" "%%~nd_tpk.tpk"
cd ..
call tizen\tizen-studio\tools\ide\bin\tizen.bat package -t tpk -s MyProfile -- ".\sign_me\%%~nd_tpk.tpk" -o .\install_me\
del ".\sign_me\%%~nd_tpk.tpk"
)
)
)
pause
Now I still need way to create Platform Cert with f%&ing DUID for Stock Firmware...
Best Regards