Hi ,
About:
This is an unofficial 6.0x build of Blisspop compiled using caf source from sultanXDA.
Changes from official build:
--
Code:
All sultanXDA's patch[/color][/b]
--
Code:
SnapdragonCamera[/color][/b]
--
Code:
android_hardware_qcom_media
-
Code:
android_hardware_qcom_display
-
Code:
android_hardware_qcom_audio
-
Code:
android_kernel_oneplus_msm8974
-
Code:
proprietary_vendor_oneplus
-
Code:
proprietary_vendor_oppo
-
Code:
android_frameworks_base
-
Code:
android_frameworks_av
Source used:
1.https://github.com/BlissRoms
2.https://github.com/sultanxda/android_kernel_oneplus_msm8974
Credits:
-sultanXDA
-Blisspop team
-XDA
-Google
Let me know if i have missed any of you .
Latest Download(08/02): (Refer the second post for the older builds)
Blisspop_CAF_MM_08/02
Screenshots:
Uploading..
XDA:DevDB Information
Blisspop, ROM for the OnePlus One
Contributors
Vivek_Neel
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2016-01-20
Last Updated 2016-02-07
Changelog:
V8:
Here
V7:
Here
V6:
Here
V5:
Here
V4:
Here
V3:
Here
V2:
Here
V1 :
Initial release
Older Builds:
Blisspop_CAF_MM_19/01
Reserved
Just in case..
Happy To see bliss marshmallow first caf build
Downloading
Will tell u bugs after testing ?
is it necessary to use latest firmware ?
i mean this :
CM 30/12 from jgcaap
Will give it a test run later today. Looking for something to update to and test.
@Vivek_Neel
Mate...Bliss for MM called Bliss 6.0 and i think you need to drop the *Pop* in your first post + the thread title too just to avoid some confusion...peace
...thread sub/
storm119 said:
@Vivek_Neel
Mate...Bliss for MM called Bliss 6.0 and i think you need to drop the *Pop* in your first post + the thread title too just to avoid some confusion...peace
...thread sub/
Click to expand...
Click to collapse
Yeah sure mate. Will do once i am on my laptop
Is it 6.0 or 6.0.1 ?
shield1331 said:
Is it 6.0 or 6.0.1 ?
Click to expand...
Click to collapse
6.0.1
Just flashed the ROM booted up fine thanks for ROM vivek
Check your inbox when you have a sec bud
Does Bliss6 support encryption?
EDIT: Flashed on top of an already-encrypted device and it decrypts and works just fine.
Blisspop, my favourite lollipop Rom. Now I'm on Temasek 6.0 (CAF) but I will try this one in a few days. Excellent work Vivek_Neel.
Vivek_Neel said:
Older Builds:
Click to expand...
Click to collapse
lol, you should update the OP )
1. refer to post #3 for older builds
2. is the 20160120 latest or "Latest Download(19/01)"
3. nice job, been waiting for this one
Thanks a lot :angel:
Thanks for porting BP to MM!
So I had the last CAF build flashed and decided to upgrade with this rom and had the oppo.verify_trustzone error. Followed instructions posted on Cm13 thread here and it is booting fine
Here are the instructions I used:
If you get an error when trying to install ("oppo.verify_trustzone" error), then first you must install/use TWRP recovery 2.8.6.0 (TWRP 2.8.7.0 cannot properly update the modem). Next, download and flash the latest official CM13.0 nightly. Then, without rebooting from recovery, wipe /system and flash my ROM. This process is necessary to update various firmwares (including TrustZone), as the updated firmware is needed by my ROM. After flashing my ROM, flash a Google apps package, and then reboot.[/COLOR]
Installation instructions (for updating to a newer release):
If you are already running my CM13.0 ROM, then you can update to a newer version of the ROM via the built-in OTA updater or by simply dirty-flashing the new ROM build without wiping anything. HOWEVER, do NOT reinstall Google Apps after installing a new update.
Click to expand...
Click to collapse
flashed open gapps and it booted fine, let it sit for 5 minutes after boot, rebooted in to recovery, and flashed Xposed-v79-sdk23-arm.zip.
Restarted phone and it stuck in bootloop
went back into recovery, sideloaded xposed uninstaller, wiped cache and it boots again.
miss the custom pattern unlock too
OP feel free to continue these builds if you like. OPO builds from source with no issues now but I have no problems with you building unofficial. However if you would like to contribute to the OPO source just let me know via PM and we can get you sorted out.
Just messing with optimization routines and toolchains now. Thank you for all your help man! The team thanks you as well!
ahb83 said:
Thanks for porting BP to MM!
So I had the last CAF build flashed and decided to upgrade with this rom and had the oppo.verify_trustzone error. Followed instructions posted on Cm13 thread here and it is booting fine
Here are the instructions I used:
flashed open gapps and it booted fine, let it sit for 5 minutes after boot, rebooted in to recovery, and flashed Xposed-v79-sdk23-arm.zip.
Restarted phone and it stuck in bootloop
went back into recovery, sideloaded xposed uninstaller, wiped cache and it boots again.
miss the custom pattern unlock too
Click to expand...
Click to collapse
I think you will need newer version of twrp for this MM Rom:
http://build.twrp.me/twrp/twrp-2.8.7.1-bacon.img
RBwai said:
I think you will need newer version of twrp for this MM Rom:
http://build.twrp.me/twrp/twrp-2.8.7.1-bacon.img
Click to expand...
Click to collapse
didn't realize a new one was out, but that did the trick. updating to new one now.
Thanks
Related
Disclaimer: SlimRoms and I are not responsible for any damages to your device.
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems. The entire project straight from Android Open Source Project (AOSP) source code. All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
Note
Since this is Beta build Bugs are bound to Happen.
SlimLP is the project name for SlimRoms based on Android 5.1.1 Lollipop and offers the following original features:
Original Features
RRO Layers Support
Doze (ambient display) timeout (selected devices only)
Options for battery icon and text
And many more
Unofficial Features
Android security patches to 2015-12-17
ToDo
Add music player
Installation Instructions
Download and install the latest TWRP recovery from here.
WIPE (Factory Reset)
Download and install the unofficial ROM through here. (md5sum: 3948aae6825bbbd86b46b9dce4eab5c4)
Download and install the latest GApps packages from this thread. (make sure you download 5.1)
XDAevDB Information
Unofficial SlimLP Nexus 7 2012 WiFi (grouper)
Contributors
ezbncs
Source Code: https://github.com/SlimRoms/
Credits
ezbncs (unofficial releases)
dexter93 (maintains the official releases)
Team SlimROM
ROM OS Version: 5.1.1 Lollipop
ROM Kernel: Linux 3.1.10 Slim_Grouper_1.1+
Based On: AOSP
Version Information
Status: Beta
Created 2015-12-17
Last Updated 2015-12-17
future stuff
last one
Looks coolio! Is there ALLF2FS support?
It has F2FS support but I have not tested it out yet.
Oh ok. I might try it later! ^^
KawaiiAurora said:
Oh ok. I might try it later! ^^
Click to expand...
Click to collapse
Tell me how it goes thank you and good luck.
It works just fine! I used your ROM, Opengapps pico and M kernel! My /data parition didn't get corrupted after reboot either (happened with other LP roms :/). Feels very fast! My only request is that you add the AOSP Lolipop Music player. Apart from that, awesome ROM! Very happy
KawaiiAurora said:
It works just fine! I used your ROM, Opengapps pico and M kernel! My /data parition didn't get corrupted after reboot either (happened with other LP roms :/). Feels very fast! My only request is that you add the AOSP Lolipop Music player. Apart from that, awesome ROM! Very happy
Click to expand...
Click to collapse
I will work on adding the music player in a future update glad it worked for you.
Layers also works perfectly! Playing music while installing apps and browsing is also flawless. I like the lower DPI (things are smaller so screen seems bigger) like other Slimroms. Amazing ROM. The browser is also very fast.
yea, works great thanks for that! will give more feedback in the next days (if neccessary).
Will there be a SlimMarsh update?
for those more experimental guys, the plain kernel of desolation rom also works on this rom. you can grab it here
KawaiiAurora said:
Will there be a SlimMarsh update?
Click to expand...
Click to collapse
I doubt there will be a slimmarsh update but it is something im looking into.
Great rom!! Any chance we could get an update with the Nexus security patches?
mh1983 said:
Great rom!! Any chance we could get an update with the Nexus security patches?
Click to expand...
Click to collapse
Glad you liked the rom, and an update should be coming soon.
CyanogenMod 13 for Sony Xperia Z4 Tablet Wifi and LTE (SGP712/SGP771)
Code:
Your warranty may be voided ! I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications.
Issues:
- Back camera focus: image is blurred and color problem (waiting for new AOSP blobs from Sony)
- Minor bug with led while charging
- No FM radio
- Tell me what you find !
How to install
- Unlock your bootloader (you can save your TA partition before)
- Update your firmware to the last Marshmallow version (needed to update the bootloader, kernel will not boot if you use the Lollipop bootloader)
- Install AndroPlus kernel and TWRP
- Make a backup
- Push the rom’s zip to the SD card (optionnaly with gapps)
- Wipe System, Data, Cache, Dalvik cache
- Install the rom (and gapps if you want)
- Reboot
- Enjoy, and give me a feedback
Advice: You can use TWRP from Androplus before installing the rom. But it will not work with cyanogenmod kernel.
So, after installing the rom, you can use TWRP made for CM kernel (see the link bellow) and press vol+ at boot, or keep AndroPlus TWRP and use "fastboot boot boot.img", were boot.img is AndroPlus kernel.
Edit : my TWRP for CM seem to has a bug with touchscreem randomly not working, you can reboot the tablet with Power-Vol+ until the touchscreen works (it doesn't stop working after boot, it just works well or not at all), or use the fastboot method with AndroPlus Kernel.
I will solve this problem when I'll have the time.
Thanks
@CTXz and @zacharias.maladroit for all the work with the Z5 serie and the kitakami platform
To all people who helped them: @oshmoun, @moonbutt74, @sub77, @Joeisgood99, @bazhip, @alphatact1cs, @auras76, @Myself5
@AndroPlus for his great kernel and recovery
Sony’s AOSP team for providing sources for AOSP
CyanogenMod team, they are provinding a great android distribution
Google for Android
All the people I don’t explicitly thanks (You can ask if you think you should be on this list, I will add you with pleasure)
Downloads
Cyanogenmod unofficial rom for karin windy (Z4 tablet wifi only)
https://www.androidfilehost.com/?w=files&flid=67714
Cyanogenmod unofficial rom for karin (Z4 tablet LTE)
https://www.androidfilehost.com/?w=files&flid=86526
Gapps
http://opengapps.org/
Select ARM64, android 6,0, and choose the variant you want (I recommand pico)
TWRP for CM kernel (both Z4 tablet wifi and LTE)
https://www.androidfilehost.com/?w=files&flid=114592
Questions
- Please, avoid asking things like: how to flash this rom, what is fastboot, …
There is enough documentation on XDA and others websites. You also probably should not use this rom if you don’t know how to recover a bricked device with fastboot and flashtool.
- I’m not a professional devlopper, I don’t receive payement for this, so don’t ask for ETA, for make a rom for an other devices, …
- I only have a wifi only Z4 tablet, I make a LTE version, but since I don’t own this tablet it’s not possible for me to debug like on my wifi tablet.
Reporting a bug
- Explain what happen with the more details you can: how does this bug happen, when, …
- Share a log if you can
Source code:
Device
https://github.com/andralex8/android_device_sony_karin_windy
https://github.com/andralex8/android_device_sony_karin
https://github.com/andralex8/android_device_sony_kitakami
https://github.com/andralex8/android_device_sony_common
Kernel
https://github.com/andralex8/android_kernel_sony_kitakami
Vendor
https://github.com/andralex8/android_vendor_sony
https://github.com/andralex8/android_vendor_qcom
The remaining source code for the kitakami platform can be obtainde from here:
https://github.com/Sony-Kitakami
https://github.com/andralex8
CyanogenMod source code:
https://github.com/CyanogenMod
TWRP source code:
https://github.com/omnirom/android_bootable_recovery
Changelog
Code:
2016/11/25
- Increase max speaker volume
- Allow to set lower minimum brightness
- Sync last CyanogenMod sources (stable/cm-13.0-ZNH0E branch)
2016/11/13
- Sync last CyanogenMod sources (stable/cm-13.0-ZNH0E branch)
2016/09/18
(- Use cm libbt again)
2016/09/17
- Sync last CyanogenMod sources (stable/cm-13.0-ZNH0E branch)
2016/08/21
- Fix USB OTG (disable switch on boot)
2016/08/20
- Sync last CyanogenMod sources (stable/cm-13.0-ZNH0E branch)
2016/08/07
- Partially fix USB OTG (fix kernel usb driver)
- Use Adreno stock blobs (32.1.A.1.185)
- Sync last CyanogenMod sources (stable/cm-13.0-ZNH0E branch)
2016/07/29
- CyanogenMod for SGP771 karin released
2016/07/10
- Update qcom blobs (SW_binaries_for_Xperia_AOSP_M_v05a)
- Cpuquiet and rqbalance improvements (cherry-picking from sonyxperiadev)
- Sync last CyanogenMod source (stable/cm-13.0-ZNH0E branch)
2016/06/15
- Fix sensors
2016/06/14
- Fix bluetooth (use broadcom libbt from AOSP instead of CM)
2016/06/05
- Fix audio (add acdb and audio config from stock 32.1.A.1.185)
- Sync last CyanogenMod sources (stable/cm-13.0-ZNH0E branch)
2016/05/29
- CyanogenMod for SGP712 karin_windy released
- Use cm stable/cm-13.0-ZNH0E branch
XDA:DevDB Information
CyanogenMod 13 for Xperia Z4 Tablet, ROM for the Sony Xperia Z4 Tablet
Contributors
andralex8, and a lot more (see thanks section)
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2016-07-23
Last Updated 2016-11-25
File is uploading, should be online in a few minutes
Edit : link temporary changed to google drive, I have problems to upload to androidfilehost. The link should work now
Well done! Many thanks for getting this ROM started and sharing it.
Sent from my SGP712 using XDA-Developers mobile app
Good to know that at last cyanogenmod was released for our tablet, hope it will be the same for SGP771 soon.
Audio fixed, now the tablet should have sound working properly
Great work! Hanging on for recovery code to be integrated after some foibles with fastboot on the sgp612.
Sent from my A0001 using XDA-Developers mobile app
belrik said:
Great work! Hanging on for recovery code to be integrated after some foibles with fastboot on the sgp612.
Sent from my A0001 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you!
In fact the current kernel/ramdisk can launch a recovery by pressing the vol+ when the led turn pink, but it cannot load the currently available TWRP recovery that need Androplus kernel.
I'm currently making a recovery that work with this kernel (it seem that it work with Androplus kernel too). It actually kinda work, it can wipe system and flash Cyanogenmod (not trying backup and restore yet). But the updater crash when trying to install Gapps, I need to fix this and it should be ok .
Awesome work, thanks! It's running pretty smooth. No problem booting TWRP manually from fastboot. Good luck hammering out the small things
TWRP is now working with the rom ! And without the need of the fastboot trick .
It's build to work with the kernel I used for cyanogenmod. (It work partialy with Androplus kernel too but with some limitations like adb is not working, ...)
This is the link: https://www.androidfilehost.com/?w=files&flid=67717
I forgot, but touchscreen may not work at first TWRP's boot. Just reboot the recovery and it should work again.
Recovery works great, no touchscreen issues after flashing it. :good:
andralex8 said:
- I only have a wifi only Z4 tablet, I could make a LTE version if nobody else make it, but since I don’t own this tablet it’s not possible for me to debug…
Click to expand...
Click to collapse
I would be willing to test an SGP771 version, if you can compile one?
Also, are the install instructions still correct?
andralex8 said:
How to install
- Unlock your bootloader (you can save your TA partition before)
- Update your firmware to the last Marshmallow version (needed to update the bootloader, kernel will not boot if you use the Lollipop bootloader)
- Install AndroPlus kernel and TWRP
- Make a backup
- Push the rom’s zip on the SD card (optionnaly with gapps)
- Wipe System, Data, Cache, Dalvik cache
- Install the rom (and gapps if you want)
- Reboot
- Enjoy, and report bugs
Click to expand...
Click to collapse
Should it not be the TWRP version you have built that should be used, as opposed to the AndroPlus version?
HotBlack77 said:
I would be willing to test an SGP771 version, if you can compile one?
Click to expand...
Click to collapse
I will check this week-end if I have the time . But I must make a cm device repo from Sony's AOSP repo before being able to compile anything. So I don't promise anything, I will see.
HotBlack77 said:
Also, are the install instructions still correct?
Should it not be the TWRP version you have built that should be used, as opposed to the AndroPlus version?
Click to expand...
Click to collapse
You first need to have a working recovery to flash CyanogenMod. And for the Z4 tablet (and almost all Xperia), the recovery use the same kernel as the system because the recovery is not lauched by the bootloader, but after, by using the FOTAKernel partition as a recovery partition.
It's the reason for what when coming from stock I advise to use Androplus kernel and TWRP. After flashing CyanogenMod, the kernel is cm's one, then TWRP from Androplus will not work and you will need to switch for TWRP for cm kernel.
You can try to use TWRP for cm kernel with Androplus kernel. I tried and it seem to work, but since it's not compiled with this kernel it may not work properly. I didn't make an extensive testing for this configuration (Androplus kernel + cm TWRP), so I can't advise people to use it but maybe it's not a problem.
Bluetooth should be fixed, the annoying bug with the keyboard is gone .
Using broadcom libbt from AOSP seem to fix the problem (thanks again to Sony Kitakami Platform Developer Organization)
Sensors fixed !
Now automatic rotation work (and other sensors too).
Is sgp771 going to be supported?
Enviado de meu SM-N920G usando Tapatalk
calj17 said:
Is sgp771 going to be supported?
Click to expand...
Click to collapse
This is what I already said a few post ago:
andralex8 said:
I will check this week-end if I have the time . But I must make a cm device repo from Sony's AOSP repo before being able to compile anything. So I don't promise anything, I will see.
Click to expand...
Click to collapse
So, you will tell me that yourself if it work or not when I'll make a test rom for SGP771 .
I already take a look and it have most of the device tree common with the SPG712, so I think it should not be too difficult to have a working rom for the sgp772 because it's working on the sgp712.
andralex8 said:
This is what I already said a few post ago:
So, you will tell me that yourself if it work or not when I'll make a test rom for SGP771 .
I already take a look and it have most of the device tree common with the SPG712, so I think it should not be too difficult to have a working rom for the sgp772 because it's working on the sgp712.
Click to expand...
Click to collapse
Great to hear that. The only difference is modem blobs between sgp712 and sgp771
Enviado do meu iPad usando Tapatalk
All fresh from this night, this is a rom for the SGP771 (Karin) :
https://www.androidfilehost.com/?fid=24591000424940766
I didn't test this rom because I only have a SGP712. Then, if someone can give me a feedback if the rom install and lauch correctly it would be great .
andralex8 said:
All fresh from this night, this is a rom for the SGP771 (Karin) :
https://www.androidfilehost.com/?fid=24591000424940766
I didn't test this rom because I only have a SGP712. Then, if someone can give me a feedback if the rom install and lauch correctly it would be great .
Click to expand...
Click to collapse
I have the 771 LTE version with recovery installed. I just need to flash the ROM and google apps?
Thanks
Sent from my Nexus 6P using Tapatalk
The Unlegacy Android Project
TF201 | TF300T/TG/TL | TF700T
Introduction
Unlegacy Android started out as the OMAP4-AOSP Project. It was created in late 2015 in order to maintain a clean and organized place for pure AOSP support for various OMAP4 devices, such as the Galaxy Nexus and the Samsung Galaxy Tab 2 series. Over time this evolved to support more than just these devices, but still maintains its roots of supporting "legacy" devices that no longer receive "official" updates: hence Unlegacy Android was born. In our opinion, these ROMs are how the official updates would look.
On top of AOSP, we only include changes which are necessary to support the hardware, be secure, and get acceptable performance. Current features for Asus Transformer Series include:
- Linux kernel 3.4.y (currently 3.4.113)
- BFQ IO scheduler (official kernel 3.4 release), set up so GUI processes have the highest priority
- F2FS support from kernel 4.9 (for /data and /cache)
Installation
You must have NvFlash backup. It is MANDATORY!
You need to use modified TWRP recovery that works with updated F2FS. If you're planning to install GApps, be sure to read the second post!
Problems
Non working/Known bugs:
- Touchscreen failure (sometimes occurs, if touch works after reboot it will work till next reboot);
- Camera (both);
- Dock special keys (top row);
- GUI crashes; - occure less often
Currently, I'm only one from Unlegacy Team, who has TF device. Help in developing or device donation would be highly appreciated.
Downloads
See: http://builds.unlegacy-android.org. Our automated builds ensure that we always have the latest Android security patches merged in, without having to manually start and upload builds Else is enclosed in downloads.
Latest information about OREO builds can be found HERE.
Features?
There isn't much to say here - this is AOSP, if you install GApps, you pretty much get the same thing that's running on the Nexus devices (see the second post). The aim of this project is to create a fast and stable ROM - although, one could use Xposed (or similar) to add extra features.
As usual, feedback is appreciated
Contacts
You may join Telegram development group, where all fresh staff is published and tests are made.
XDA:DevDB Information
Unlegacy Android Project, ROM for the Asus Eee Pad Transformer Prime
Contributors
Clamor, Ziyan, Narkolai
Source Code: https://github.com/Unlegacy-Android
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Bootloader 4.2 JB
Based On: AOSP
Version Information
Status: Beta
Created 2018-02-18
Last Updated 2018-10-17
Installation gide (for those who uses F2FS)
Before installing ROM you need to update your current recovery with this TWRP, else you will get a bootloop with next format from fastboot. Install zip from your current recovery and reboot into your current system. Than boot into new recovery and install ROM (with factory reset).
Currently 3.4 kernel isn't stable enough for daily use. You may use updated 3.1 _that16 kernel, it works fine with this ROM. To make wifi work with _that16 kernel just move nvram_nh615.txt from system/etc to data/misc/wifi and rename to nvram.txt
You may use KatKiss 7.1 if you want, but you must flash a _that16 kernel every time after flashing KatKiss ROM. Else you will get a bootloop with next format from fastboot.
If you want to go back to ordinary TWRP, you need to make a format from fastboot, flash TWRP and make formats from there as well.
REPARTITION and TREBLE
TF201 users know well what is repartition. While flashing 4.2BL from HB internal storage is reformatted. This thing is exactly the same.
I worked on it for few last weeks to make it stable and simple enough to any user to install this update. As usual NvFlash is MANDATORY!
So, UA_Bootloader.zip includes latest JB4.2 10.6.1.27.5 bootloader, modified TWRP [email protected] from Downloads section and my new partition table. It's main benefits are /system partition increased to 1GB and /vendor partition. This means that we may install bigger gapps packages and support of TF's may be extended plus having /vendor partition gives us at least hardware support for Project Treble, even if there is no 8.1 builds currently.
Before installation copy everything from tablet on PC, else all you data will be lost! To install this update just install it via TWPR and when flashing is finished press reboot into system. Than wait till blue line gets to the end and tablet reboots. Tablet will than stuck into ASUS screen with Device is Unlocked sign in top left corner. Than reboot manually into recovery and format /system to ext4; /cache to ext4 or f2fs; /data to ext4 or f2fs and you are good to go.
New partition table is compatible with all existing ROMs for TF's. If you flash ROM with system in .img file you need after flash into recovery do Wipe -> System -> Advanced Wipe -> Change or resize partition -> Resize filesystem. If you want to restore 4.2 state you can flash HB bootloader or Bootloader 4.2 attached in Downloads section.
Thank you very much for your work !
I see you have done some modifications on github. Can you explain to me how generate system.new.dat & system.transfer.list from your repo in order to create an updated version of this ROM ?
MalibuKoKo said:
Thank you very much for your work !
I see you have done some modifications on github. Can you explain to me how generate system.new.dat & system.transfer.list from your repo in order to create an updated version of this ROM ?
Click to expand...
Click to collapse
Actually you can't build fully working ROM from my source for now. If you would like to help in developing - PM me.
Do I need stock tf201 bootloader, or is this based on the hairybean boadloader? Like Katkiss ROM is based on.
Thanks for sharing this ROM.
goosebickel said:
Do I need stock tf201 bootloader, or is this based on the hairybean boadloader? Like Katkiss ROM is based on.
Thanks for sharing this ROM.
Click to expand...
Click to collapse
Based on latest 4.2 bootloader (like Hairybean). I'll provide a bootloader + new TWRP and separate TWRP as soon as I get a stable recovery build.
General Feedback
Finally got around to flashing your ROM a week ago, following your instructions, everything went fine. I installed your UA-bootloader and flashed _that16 kernel.
Running pretty smooth with Pico gapps installed, after a week, the usual happens, slow loading apps etc, but that is not the ROMs fault, the very slow memory that Asus put into it and Google is slowing it down with constant syncs etc.
Was wondering if you had added compatibility for using MicroG?
Thanks for keeping this old tablet going.
@goosebickel sorry for such a long silence. MicroG are supported as I can say (I installed them but didn't test much).
P.S. If you are still on UA rom there is an update.
Oreo 8.1
Yesterday I have quickly build 8.1 ROM for transformers. There doesn't work almost anything and I won't have excess to my TF201 for a while to fix stuff Rom can be booted with same requirements as N roms. Here is first build. Please don't post any issues/logs from O for now. I know already about all major issues.
Thank you!
Great to see some development for the Transformer Prime
I have some good news. Here is mostly working build with issues from N + non working bt. I'm still working on fixing staff so this isn't last build.
P.S. Remove system/lib/hw/bluetooth.default.so to avoid constant bt crash
Clamor said:
I have some good news. Here is mostly working build with issues from N + non working bt. I'm still working on fixing staff so this isn't last build.
P.S. Remove system/lib/hw/bluetooth.default.so to avoid constant bt crash
Click to expand...
Click to collapse
Are you planning to work on Pie as well once 8.1 is somewhat stable?
shinzz said:
Are you planning to work on Pie as well once 8.1 is somewhat stable?
Click to expand...
Click to collapse
I'm planing to bring up P as well. If O works, P should work as well.
Can the ROM be installed by using the latest KANG TWRP 3.2.3 or do I need to use the TWRP found in the download section?
@shinzz TWRP from download section
any update?
shinzz said:
any update?
Click to expand...
Click to collapse
Noticed the link to the ROM is 404'ed also. - NP
latest 8.1 build, I need some time to update info, but generaly same bugs remain + 8.1 is still unstable.
It will work only with UA TWRP
Clamor said:
latest 8.1 build, I need some time to update info, but generaly same bugs remain + 8.1 is still unstable.
It will work only with UA TWRP
Click to expand...
Click to collapse
My 201 is on KANG's - TWRP 3.2.1-0 and KatKiss, if this ROM just a simple wipe and flash with KANG's - TWRP 3.2.1-0 and the Harry Bean bootloader on my 201 or will I need a different recovery console, bootloader ext. ext? - NP
FIRST OF:
You warranty is now void dont point at me if Broken or ill laugh at youbla bla you already know it
THIS IS NOT MY ROM! ALL CREDITS TO MAKING IT, GO TO THE AOSPA TEAM!!! I JUST EDITED TIME VALUES TO THE YEAR 2020
So i found (and "restored") this old paranoid Android 8.1 build...a lot of features missing like Theme manager but with built in Substrat um support? Everything Working
OEM image Version 17 for Android 8.1 Loire required
Rom download:
https://drive.google.com/file/d/1C6iliMInY5pH9mVwPiKUdzc1VFSNnvSe/view?usp=drivesdk
You can get that image Here:https://developer.sony.com/file/dow...s-for-aosp-oreo-android-8-1-kernel-4-4-loire/
Known bugs: Reinstall needed if navbar turned off and on
You dont tell me
Because I can't fix it
Gapps not included but found Here:https://opengapps.org
Special thanks to: Paranoid Android Team for making this Rom
And Me for " restoring" it I guess
Some random said:
FIRST OF:
You warranty is now void dont point at me if Broken or ill laugh at youbla bla you already know it
THIS IS NOT MY ROM! ALL CREDITS TO MAKING IT, GO TO THE AOSPA TEAM!!! I JUST EDITED TIME VALUES TO THE YEAR 2020
So i found (and "restored") this old paranoid Android 8.1 build...a lot of features missing like Theme manager but with built in Substrat um support? Everything Wirkung and OEM image Version 17 for Android 8.1 Loire required
Rom download:
https://drive.google.com/file/d/1C6iliMInY5pH9mVwPiKUdzc1VFSNnvSe/view?usp=drivesdk
You can get that image Here:https://developer.sony.com/file/dow...s-for-aosp-oreo-android-8-1-kernel-4-4-loire/
Known bugs: Reinstall needed if navbar turned off and on
You dont tell me
Gapps not included but found Here: Opengapps.org
Special thanks to: Paranoid Android Team for making this Rom?
Me for " restoring" it???
I really dont know
Click to expand...
Click to collapse
Wow someone actually thanked this!
Oh and by The way this Rom is rootable and should Have full xposed support too
For those who aren't clear, this guy changed the build date of AOSPA 8.1.0 to 2020, so that it could be installed over latest stock firmware. The build on AOSPA website was throwing errors while flashing, because it was built before .118 firmware.
Personally i'm not using this one (still waiting for PA9 stable) but i can see this coming in handy. Good work.
Yeah wasnt really hard or something just needed some converters and thats it
Hi, I want to try Paranoid Android on my Xperia X but neither the official image on aospa official site neither this version worked for me. The rom is correctly flashed on my device but after the sony logo image I have a black screen with the error message "Your device has failed verification and will not work properly." and then it shuts down.
I flashed the ODM oem.img v17 for Android 8.1 before flashing the AOSPA zip.
Do you know how to solve this problem?
DaNi95 said:
Hi, I want to try Paranoid Android on my Xperia X but neither the official image on aospa official site neither this version worked for me. The rom is correctly flashed on my device but after the sony logo image I have a black screen with the error message "Your device has failed verification and will not work properly." and then it shuts down.
I flashed the ODM oem.img v17 for Android 8.1 before flashing the AOSPA zip.
Do you know how to solve this problem?
Click to expand...
Click to collapse
Hey!
Currently my Xperia X is broken...
But try reflashing the latest stock Oreo before using this
DISCLAIMER
This rom is usable BUT it's just a old development build with a patch applied
There are a lot of bugs
If you find one please report it to me
I'm going to put that bug into OP
Some random said:
Hey!
Currently my Xperia X is broken...
But try reflashing the latest stock Oreo before using this
DISCLAIMER
This rom is usable BUT it's just a old development build with a patch applied
There are a lot of bugs
If you find one please report it to me
I'm going to put that bug into OP
Click to expand...
Click to collapse
I've tried flashing AOSPA after reflashing the stock Oreo and my Xperia X got stuck on Sony logo. I didn't flash the ODM oem image after reflashing stock Oreo
Instructions:
0. Make sure your bootloader is unlocked
1. Download ROM zip from the link below, and grab Magisk patched boot.img inside the folder as well if you want root access
2. Reboot to bootloader
2.5. Flash updated bootloader.img and radio.img from Google site
3. Use `fastboot -w update LineageOS_microG-bramble-(BUILD DATE HERE)-userdebug-signed.zip` to flash
and yes, you can omit the "-w" parameter if you're not flashing for the first time, aka just updating from previous release
4(optional). Hopefully after flashing you'll be booted into LineageOS, reboot to bootloader again,
and flash the Magisk patched boot.img extracted from the 7z file with `fastboot flash boot magisk_patched.img`,
reboot after finished
5. Enjoy!
Click to expand...
Click to collapse
Download from GitHub Release page
Download(MEGA, won't be updated anymore)
Features:
1. MicroG integrated nicely (Thank OmniROM dev([email protected]) for the repo)
2. Replaced default WebView with Bromite WebView
3. Default DNS was set to UncensoredDNS in framework overlay
4. Removed unnecessary prebuilt APKs
Click to expand...
Click to collapse
Contacts:
Telegram:
Channel for Pixel 4a 5G related stuff
Group for Pixel 4a 5G discussion
Contributors
dic1911
ROM OS Version: Android 12
ROM Kernel: Linux 4.x
ROM Firmware Required: Current
Based On: LineageOS
Version Information
Status: Testing
Created 2021-12-19
Known Issue
1. SMS messages not receiving (Fixed in 2021/12/27)
2. No network access for apps installed in work profile (Looks like ROM side bug, still investigating)
How do I install for the first time? Please help me
trongcccc said:
How do I install for the first time? Please help me
Click to expand...
Click to collapse
Where are you up to? Have you unlocked the boot loader, as per - https://wiki.lineageos.org/devices/bramble/install
I'm running into my pixel 4a5G in a boot loop. I downloaded the wrong lineage product, forgetting that I have A-12. duh.
Just a quick head up, SMS message functionality isn't working in initial build, it's fixed in latest build (2021/12/27)
Hello! Mind elaborating on this step? Thanks!
2.5. Flash updated bootloader.img and radio.img from Google site
(What Google site? Do you have a URL? Specific version?)
kevin71246 said:
Hello! Mind elaborating on this step? Thanks!
2.5. Flash updated bootloader.img and radio.img from Google site
(What Google site? Do you have a URL? Specific version?)
Click to expand...
Click to collapse
Official factory firmware, any version as long as it's Android 12 and for your phone.
Quick question, is this just using the lineage 18.1 device trees or?
EDIT: Nvm i saw the 19 branch
Hey quick question, how do you package the finished build as a bunch of images?
A little heads up, initial build for Lineage 19.1 is now up, without Bromite System WebView for now.
Another build is up, now with Bromite Webview and April security patch!
How do I get support for this 19.1 version? I tried the official Lineage channels but they told me they do not support. I downloaded and installed from here:
LineageOS for microG
lineage.microg.org
nanu.nanu said:
How do I get support for this 19.1 version? I tried the official Lineage channels but they told me they do not support. I downloaded and installed from here:
LineageOS for microG
lineage.microg.org
Click to expand...
Click to collapse
I doubt anyone really provide extra support for that as they're mostly just grab existing LOS stuff and build without further effort afaik.