Hi
Hope you all are doing fine !
I am new to this forum and its my first post here !
I was thinking to create an account on this forum since a week, but today i had to as im in trouble
I hope i will get solution.
I have just purchased Samsung Galaxy S3 Clone (Mediatek 6575). Its Android 4.2 Jelly bean.
It was working perfectly fine only had issue that it's wifi was catching signals really weak. I mistakenly factory reset my phone which cause to no boot up animation. Its just blank when i turn on or off my phone. To fix that i rooted my phone as to get into root files i need to root it.
Since i rooted my phone the issue i am having is it says "System UI Stopped working" , "Touch wizard stopped working". Now what should i do, i am really worried.
I tried going into the CWM recovery but its not going, it was going in stock recovery before now its not even going in the stock recovery its just all blank.
Now what should i do, its okay if i don't get the bootup logo/shutdown logo but atleast i have to remove these errors.
I am not into these things much so i have no idea.
How can i unroot my phone ? Would it fix problem ?
Or what i should do to fix this issue.
My Phone hardware is Mediatek 6575 , android 4.2 jellybean.
When the error "System UI stopped workin" appears the background becomes black and the notification bar disappears.
Please help me what i should do
Thanks alot, i need urgent replies.
I hope my issue will be solved soon.
reply
Plz reply
need fix soo
Your gonna need to reflash your Rom from scratch. You will have a hard time finding it as clone devices don't use real Android versions or software.
Bat cave One
i replaced my systemUI.apk another system UI but i lost my apk file now i am getting blank screen .i have a swipe lock but it is not opening due to blank screen ,another complication it is my usb debugging is off .How can i open my launcher toget my phone back, please help me
this android tab is a clone one which it says it is a samsung, but unfortunately, no pre-installed recovery and no odin are installed... and this is stuck in boot loop. pls help me with this one... i need to install a CWM Recovery using SD card flashing or if u know anything else that will work, pls tell me. i think this tab is not rooted due to the owner, which is a girl... girls, most of them, just use the tab without knowing these informations like rooting so its very hard for me. pls help me. ty in advance.
I'm using Lenovo A766, Android 4.2.2. My device is a rooted android. I have a problem that just happened last night. I tried to install 'Chainfire 3D'. To those who know how Chainfire 3D works, I'd appreciate it but to those who dont know, we need to install something that even I cant remember what it is but it did give me a warning about something before installing it. My problem is, Once I installed the application, My device would reboot automatically. Now, my Lenovo A766 would not boot up, It's stucked at the boot up. Idk whether we call this brick or what but as I know, Brick is when your phone cant even shine a single light. But my device can, just it gets stucked at the boot up. Please help me asap. Thanks for reading this thread. All ways to fix my problem are really meaningful to me. I'd really really appreciate it! Thanks again!
Please help me. Onegai shimasu.
Hi guys, Im here cause I screwed up lol.
Im really hoping someone can kindly help me out.
I have rooted and unlocked my phone, and used a few apps to do it. Its been a while but I think I unlocked it with an app called kingroot,
and rooted with a different app called kingoroot (slight variation in the spelling), anyways the root worked, but now I cant update my operating system, I tried to use the unroot feature on the kingoroot but everytime I try to install update for android it restarts the phone and i see recovery mode with chinese writing with the android logo in the background briefly , then phone restarts and update is not installed.. I tried doing a factory reset and when my phone goes into recovery mode its all chinese writing.. Im too much of a noob to know what the heck is going on.. I assume the kingoroot app flashed a chinese recovery or something? not sure of the lingo so Im sorry. Please tell me how I can fix the chinese recovery mode and update my phone operating system. I would still like to have my phone rooted for an app I like to use after im all updated. if possible.
I am using HTC one m7 from Rogers (Canada)
Any help is greatly appreciated, keeping mind Im a technological idiot so please keep it as simple as you can
sorry I posted this in wrong section. Please delete
Hello everyone , today i received a notification from lenovo that there is a new lenovo firmware update , i got so excited and i pressed ddownload buytton then it said that u can brick our device because this phone is rooted , so i unrooted the device completly and downloaded the firmware update wheni pressed the install button it restarted to the recover and showed an android toy laying down and the software upgrade percentage as a bar on the android phone screen, i thaught its normal and then it showed a little text under android logo that said "error" i thaught its just a normal failure and i will now just start the phone to normal mode and when i realised its been a lot of time phone is not turning on , found out im stuck at the bootloop, now i dont know how to ubrick it plz help, ill be thankful to you, plz repl and help now before it's battery dies and becomes dead phone. plz tell me a quick way to fix that ive tried to factory reset via recovery mode i am only able to visit the recovery screen my phone is unrooted, and i can also connect it to pc, plz tell me how to flash stock firmware
,EDITED : NOW I CANT turn on my device it is not turning on,now im unable to go to recover manu all i can do is when i connect it to my pc i hear a sound from my computer that something is connected and i cant turn on it's screen i tried all types of key combinations i cant turn it on plzzzzz help. Anyone?
not bricked
alihassan1397 said:
Hello everyone , today i received a notification from lenovo that there is a new lenovo firmware update , i got so excited and i pressed ddownload buytton then it said that u can brick our device because this phone is rooted , so i unrooted the device completly and downloaded the firmware update wheni pressed the install button it restarted to the recover and showed an android toy laying down and the software upgrade percentage as a bar on the android phone screen, i thaught its normal and then it showed a little text under android logo that said "error" i thaught its just a normal failure and i will now just start the phone to normal mode and when i realised its been a lot of time phone is not turning on , found out im stuck at the bootloop, now i dont know how to ubrick it plz help, ill be thankful to you, plz repl and help now before it's battery dies and becomes dead phone. plz tell me a quick way to fix that ive tried to factory reset via recovery mode i am only able to visit the recovery screen my phone is unrooted, and i can also connect it to pc, plz tell me how to flash stock firmware
,EDITED : NOW I CANT turn on my device it is not turning on,now im unable to go to recover manu all i can do is when i connect it to my pc i hear a sound from my computer that something is connected and i cant turn on it's screen i tried all types of key combinations i cant turn it on plzzzzz help. Anyone?
Click to expand...
Click to collapse
hey there ,sorry for the late reply ,but i just read the question .
if you can log into bootloop then your phone isn't really bricked .
can you get into the recovery ? if so ,you should just delete the cash and the delvic cash and reboot .you'll be able to get out of bootloop .
amr elfiky said:
hey there ,sorry for the late reply ,but i just read the question .
if you can log into bootloop then your phone isn't really bricked .
can you get into the recovery ? if so ,you should just delete the cash and the delvic cash and reboot .you'll be able to get out of bootloop .
Click to expand...
Click to collapse
hey buddy, mine is somewhat similar but i did hard reset and cleared cache partitions but when i try to switch it on, still says no command. any help please,.
you can reach me at [email protected]
thanks in advanced!
kasmotsadamori said:
hey buddy, mine is somewhat similar but i did hard reset and cleared cache partitions but when i try to switch it on, still says no command. any help please,.
you can reach me at [email protected]
thanks in advanced!
Click to expand...
Click to collapse
what do you mean it says no command. ? can you please elaborate ?
Same problem to me, need help
http://ainotech.com/how-to-flash-lenovo-a5000-receive-root-custom-recovery/
It worked for me now my phone is working better then it was before , I think it will work for you too,