Hello!
My problem is that when installing the TWRP on Huawei G510, the phone turned off and will not turn on.
How do I turn it on, it displays the message "Image signature verify fail".
Recorvey mode is not working. I can enter in the pink screen, by pressing the Volume-, Volume + and power button.
The phone is unlocked by the root, by Kingo ROOT.
Bootloader is locked.
DC-Unlocker program does not detect the phone!
Related
Doesn't enable oem command/or any other command/ Cant flash it "Device locked"
Good day/afternoon/night... I have a problem for several days now with my nexus 9; I had the 5.1 version I I couldnt updated because when I try it the tablet would restart and the update would iniciate normally but more o less half way would show an error message and the tablet would restart without the update; I downloaded the 6.0 update from the oficcial page to try to flash it with the nexus tool but I coulnt because the bootloader is "Locked" Then to open the bootloader the tool tries to open the "oem" and restart the tablet but it kept how is shown in the video, An eternal looping, So I cant access to the device configuration and activate the oem option from the developer menu. HELP.
https :// www .youtube.com /watch?v=7qIuh7oPaq4&feature=youtu.be
forerver loop
I've had those symptoms or something very close. I managed to get it fixed with 10 minutes of button pressing - it was a case of holding the power button until the screen went blank and then guessing when to release the button before an immediate "hold volume down and press power" to get to the bootloader.
peterk-1 said:
I've had those symptoms or something very close. I managed to get it fixed with 10 minutes of button pressing - it was a case of holding the power button until the screen went blank and then guessing when to release the button before an immediate "hold volume down and press power" to get to the bootloader.
Click to expand...
Click to collapse
I tried that, but it did not work. anyway... I have smooth access to hboot :crying:
All of a sudden if my phone went off and showed me the message:
"your device has failed verification and may not work properly.
1) Press power key to continue.
2) Press volume up key up to 3 seconds to enter erecovery to restore your device.
3) your device will stop,start if there is not operation."
In FASTBOOT&RESCUE MODE:
PHONE lock
FRP lock
Good day everyone. Recently my Mate SE (BND-L34) was left to charge overnight and wouldn't boot up the next day, it's just stuck on the start up screen. Unfortunately, developer options weren't on so no usb debugging although I can only access fastboot when I hold power + vol down. However, when I hold vol + up, nothing happens so I can't access any recovery menu. The phone is completely stock so no root, no custom recovery or firmware, locked bootloader, etc. I did try both methods mentioned here for locked bootloader: "https://forum.xda-developers.com/mate-20-x/how-to/fw-emui-9-1-0-123-evr-al00-t3935995"
Neither of them worked. With HStool, the program (HStool) closes itself after HiSuite has decompressed the download and is about to start installing recovery. The other method mentioned, when "installing recovery" part of the process starts, the phone exits fastboot and goes to the boot screen... both methods actually end in the same result with HiSuite giving me the error message "Recovery Failed" and the phone being on at the boot screen (exiting fastboot before the procedure has finished).
In case it's of any relevance the current firmware on the phone is BND-L34 8.0.0.362. Any suggestions would be greatly appreciated, thanks.
Hello! i don't know how but my rooted Mi A3 last night decided on its own to update to Android 10. So i woke up with all of mine Magisk magic all gone. I tried to root again but my phone is stuck on the 'Mi' boot screen.
So here's the situation:
if i press volume up + power button, instead of entering recovery mode the "no Command" screen shows up;
if i try to fastboot, my pc doesn't recognize anymore my device;
There is any another way to enter recovery mode? Can i flash a boot image on a sd card? Do i have to throw away my beloved xiaomi?
You have most probably incompatible Magisk module which prevents phone from booting Android 10. Flash stock boot image to get phone working (fastboot should work, double check your drivers etc.).
Or perform factory reset from stock recovery:
"If presented with an image of a broken Android with "No Command" shown on the screen, do the following:
- Press and hold the Power button.
- While holding the Power button press the Volume Up button then release the Volume Up button then the Power button."
Guys, I'm in need of assistance, I've tried everything, even unlocked the OEM, and the USB debugging is on, but when I try to flash the TWRP recovery on Odin, the procedure fails and it shows a message on the phone saying, "CUSTOM BINARY (RECOVERY) BLOCKED BY OEM LOCK'.
Please, if anybody has a solution, it will really be appreciated.
1-Turn off the device.
2-press Volume Down + Volume UP + Connect the USB cable.
3-You will see a warning and under it three options (Volume up: Continue / Volume up long press: Device unlock mode / Volume down: Cancel restart phone.
4-Will choose Volume up long press: Device unlock mode.
5-Unlock bootloader page will appear, Under it are two options (Volume up: Yes / Volume down: No).
6-Press the volume up key.
The device will reboot and a message will appear telling you that the boot loader has been unlocked, Then press the power switch to continue.
7-Then press the power switch to continue.
8-The bootloader is unlocked, Done.