Hi All, I have a old PC with Dual Core processor and 2 GB RAM. I havn't been using this PC and want to try installing Remix OS on it. I don't want a dual boot. I want only Remix OS on PC. How can I do that? Any ideas/suggestion?
A full guide about how normal users can install Remix OS on their PCs is very wellcome.
I also have an old PC that almost nobody uses and I would like to try out Remix OS on it.
Here are the specs,(maybe some dev who knows how Remix works and say if it can run on it):
Intel Pentium CPU Dual Core 2,66 GHz
nVidia Gefore GT 220 1GB
200GB hard drive
2 GB DDR2 RAM Memory
Dedicated Sound Card
USB Wireless Adapter
Thanks!
You cannot. Nvidia cards have trouble with remix os.
Related
I have Toshiba netbook NB200-10z.. It is running with Intel Atom N280 1.6Ghz single core processor with 2 GB DDR2 RAM and a Intel GMA 950 GPU with 256MB RAM. I have currently dual boot system with Win 8.1 + Tiny 7 (light weight version of win 7).
Can I install third OS to use that is android? Can I install 4.4 on my system? Which one I should select from here http://www.android-x86.org/download
I will be able to install apps and games from play store or not? And is it possible to install it on USB flash drive rather than Hard Disk? If yes then how?
My laptop is the HP Pavilion G6-1220SA:
AMD A8-3500M APU WITH AMD 6620G RADEON HD GRAPHICS
6GB DDR3 RAM
120GB SSD AND 160GB HDD
My problem is that although my CPU is 64-bit (have a look here), Remix OS x64 will not work with it! It gets stuck on a black screen where on x86 there was a cursor then the Remix OS boot logo! On x64 I do not get the cursor nor the Remix OS boot logo...
What is going on?
The PC in question is my Acer Aspire 1810TZ, which has a 64-bit processor. Specs are as follows:
CPU: dual core Intel Pentium SU4100 / 1.3 GHz
Cache: L2 - 2 MB
Bus: 800 MHz
Chipset: Mobile Intel GS45 Express
I tried running Remix 3 (v206) on it from a USB 3 stick just to make sure it worked prior to installing it. To prepare the USB, I downloaded it from a Windows 10 partition on the laptop, and used the installer to install it on the USB stick. It starts out OK, but goes fairly quickly to a blank screen. I then tested this same USB on a Dell xps 13 and it worked fine. What I did next was to download the 32 bit version, again from the Windows partition of the Acer. This one ran OK, and I was able to use it to install on an SSD partition in the Acer. Given that this laptop is 64 bit, why shouldn't the 64 bit version of Remix run on it?
so i have a linx vision, its a windows 10 tablet and specs are.
intel x5 8300 w intel hd gpu and 2gb ddr3 1600mhz
its 32bit firmware on the bios, i have had secure boot off and had remix os installed to an sd card but keeps failing to boot
can anyone help me to get android running on my device? i have also tried to use androidx86 live iso but that wont do squat...
any help would be grrreat
So lately i have installed latest version of phoenix os which is 2.6.3 (64-bit)(My laptop is 64-bit also) i installed it, everything was ok, but when i boot it just won't start the os, it just stays on a screen saying Android x86
My laptop is Packard bell NJ65 which has:
CPU: Intel core 2 duo T6600 cpu with 2.20GHZ
Graphics Card: Nvidia Geforce G105m (512mb)
Ram: 4GB
Storage: 500gb (16gb for Phoenix os)
Note: Remix OS is working perfectly but i want Phoenix os because Remix is dead.
Hope someone could help me