I accidentally flashed an incompatible firmware into the device.
That is : MF190_MOVISTAR_ES_EUV1.00.00
As a result of which,the Dashboard(the CD drive with drivers and all) isn't showing up, But the device is working on systems with pre-installed drivers.
Orignal firmware version: BD_RELIANCEMF190V1.0.0B01
I have the reliance firmware files and I tried to flash using QPST 2.7 build 411 ,but modem never switches to download mode.
If anyone could help me with QPST or post link for firmware installer executable or Any how get its dashboard working again, i will really appreciate it.
Related
Does anyone knows if qpst can be used on touch pro sprint? I have tried but it will simply not recognize the phone, also I have downloaded the newest version of qpst. Can anyone help?
tahnks
do the ## commands to connect your phone in Diagnostic mode. I believe its ##3424# then it will install some drivers
For anyone who had the same problem here is what I did:
installed qpst 2.7 build 301 from here:
http://rapidlibrary.com/download_fi...d&file=10052878&desc=QPST+v2.7+Build+301+.exe
Put the phone in DRM mode with diag:
Download run_arm
http://www.pocketpcdn.com/articles/run.html
Execute run_arm with the following parameters:
in program: \windows\dmrouter.exe
in parameters: /DIAG
Then I got the drivers from here:
http://helpdesk.houdinisoft.com/downloads/QDHTC.msi
Ran qpst and added the port where the phone is.
Hope this helps.
Hi all,
Great forum! I thought someone may be able to help me before my Lenovo P780 goes on ebay. Having bought the phone from China I cannot get a decent stablel signal on either sim slot. Sim 1 is very hit and miss and Sim 2 barely works at all. The current state of the phone is so unreliable that it makes it useless as a functional device.
I currently have the S110 ROW firmare and the v17 modem installed and despite all efforts to change them it has not been possible.
My final straw came when trying to install the row firwares from Satanduck, using his useful guide. I installed the drivers, loaded SP Flash tools and followed the instructions to tick the DFa Dl check sum, however the firmware will not flash as there is no path for the Uboot image, there is no path? All other files are there, and ticked U boot is empty and if I tick it and hit firmware - upgrade it says HINT UBOOT is checked but with out path?
I have tried all 3 ROW ROM's he has provided and they all have no UBOOT path, surely they are completed firmwares? Many others on this forum I am sure have used them. Please help?! Is there something I am doing wrong?
Thanks all
Basicly loaded a dual sim rom on a single sim Acer Liquid Z200.
was helped so far in this thread: http://forum.xda-developers.com/and...ms-cwm-root-acer-liquid-t2960787/post59482099 by @Shreps, but somehow i got this message that due to the 10 post rule i wasnt able to post anymore.
Downloaded the last zip file, but CMW doesnt seem to recognize my SD card.
Tried to load the rom with adb using sideload, but get the message cant find device.
Is it possible to load another version of CMW, mount it with USB and flash the zip file from the pc? And can i use any CMW file or are the custom made for each type of phone/brand?
Any other suggestions, got no clue what to do now
edit 18-3-15:
Tried to re-load CWM with Smart Phone Flash Tool and got this PMT changed for the ROM; it must be downloaded
Update:
Did a format of the device using Flash Tool, MTK USB poort was loaded and was able to flash the ROM for dual SIM.
@stef951
Try to flash this firmware from a Recovery :
update-Acer_AV0K0_Z200_1.012.00_EMEA_GEN1S-sds.zip
It's the stock firmware Single SIM EMEA GEN1s, you should back to your original firmware.
Click to expand...
Click to collapse
used recovery to install the firmware for sinlge SIM.
However now stuck with IMEI issues.
Used Mobile Uncle Tool and MTK Engineering to get into Engineering mode, but get this message: "cannot find engineer mode app"
*#*#3646633#*#* doesnt do anything. Possible that Engineer mode isnt installed? And is it possible to install it on my device?
Tried to load IMEI with MTK droid gave me a message "Changes will come into force after reset", but nothing changed -_-
Any other options on this IMEI matter.....?
Finally found a solution to enter Engineering mode, type *#*#2237332846633#*#*
When i try to change the IMEI with AT commad get a message AT command is failed to send
Tried Uncle tools, but unaible to acces engineering mode with this app.
I can enter a valid IMEI in MTK tools, but after reboot its still unknown.
Tried to copy a new MP0B_001 file to the NVD_IMEI folder
but all failed :crying:
Still searching for the solution, but if someone over here can help me out it would be appreciated.
Phone is not reading SIM card neither, is this because of the IMEI issue?
Acer Z200 Working again!!!
GOT MY PHONE BACK TO LIFE!!!
Lost the serial number and IMEI, had to write them back to NVRAM using Maui META tool.
Tutorial how to found on http://www.gizbeat.com/6058/how-to-...-for-mtk6582-mtk6572-mtk6592-mtk6589-mtk6595/
In the attached ZIP the files i used for the Maui META tool
Android_Gadget_CDC_driver, CDC driver didnt got installed so had to do this manually.
MTK6572 database: BPLGUInfoCustomAppSrcP_MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V1_P3_1_wg_n
If you have the serial and IMEI number, go to method B under Restoring Values and add the manaully.
When loading the MTK6572 database i also got a warning: execution warning nvram database file is inconsistent with target load
Ignored the warning and just writed the serial and IMEI to the device.
Disconnected, rebooted and got a working serial and IMEI.
So happy that the damn thing got working again.
bro I saw your successful post about Acer Z200. but I can't install CDC Serial Driver .
. how to Install Manually ? Android_Gadget_CDC_driver, CDC driver.
Can you explain to me.
Thanks in advanced
Hello,
I'm here trying to get help to solve a LG L65 D280n with the null IMEI problem.
I'm hopping there's no problem with the hardware as it was working ok and didn't fall or something else. It just got that way and it was nw unlocked some months ago.
Well, I've 1srt search and follow many youtube videos and read a lot of threads.
At 1srt I've tried to use official software form LG. LG mobile tool and drivers.
I download and install them everything goes well, phone is detected and after usb connection the firmware download started.
Problem was, after the point that it decompress the firmware and it was supposed to start copying it to the phone, the LG app just hangs with the windows error as it stops responding.
Using a machine with Win7 Pro x64.
From this saved the LG kdz file and the dll file that was downloaded.
I can't get another because the links from:
http://redirect.viglink.com/?format...g-phone-firmware.com/firmwar...-Tutti-50.html
are broken to the Europe/Portuguese version A or B of this phone that was original from MEO/TMN
Then I've tried another LG tool, older I believe. It requires qualcomm software, visual c++ etc.
All went well until I've selected a com port at the QPST configuration and then at the RF NV manager were I would try to write the IMEI it fails.
I select the COM port I've added before at the QPST configuration app but when I select the READ from phone option it just returns error ... DM command 19-24.
I was hopping to flash the modem only or to write the IMEI manually but its getting hard to solve the communication problem even after trying in different computer and with 3 version of drivers and software.
Recovery mode only shows if I wanna do factory reset, I did.
Can someone help?
Tried also EFS Professional now using Qualcomm NV tools, I can select the phone COM port but if I try to connect to it with 000000 Send SPC option on, It returns error, unable to send SPC to the phone.
I have bout Kult gladiator which was completely locked while my friend made several attempt to fingerprint open, thereafter i have downloaded original stock rom and flashed through sp flash tool, after that the there is no imei. phone is mt6737m chipset, thereafter i found imei & SN writer and inserted original imei nos but my phone is not connected with meta mode i tired both with & without battery but unable to connect kinldy some one will help me to connecte with meta mode and one thing i installed mediatek preloader vcom drivers and other com drivers.
Please some give me step by step instructions it will be greatful.
some one please port AP-BP for AP_BP for baseband MOLY..LR9.W1444.MD.LWTG.MP.v110.5.P35 and i also tried mtk engineering mode there is no cdc available can some one get me stock rom for the kult gladiator phone
Hey how can root my device....all apps i try bt not working..example king root,kingoroot, framework,oneclick,iroot, etc