Hello, I recently bought an mi box 3rd gen or also called Enhanced Edition, and I want to root it to make it full English UI and uninstall some system apps, could someone help me how to root it, I would be very gratefully, I searched all the internet and nothing still.
It has just 3 ports
1.HDMI Port
2.USB Port
3.Power Port.
Reply: for MI Box 3 Enhanced Version
Hi
Even I purchased it recently and can anyone guide me on this please.
samcex said:
Hello, I recently bought an mi box 3rd gen or also called Enhanced Edition, and I want to root it to make it full English UI and uninstall some system apps, could someone help me how to root it, I would be very gratefully, I searched all the internet and nothing still.
It has just 3 ports
1.HDMI Port
2.USB Port
3.Power Port.
Click to expand...
Click to collapse
Found a way !!!
Hi there,
I managed to successfully root my Mi Box 3 w firmware 1.3.114 . Thought I'd share
Tools needed:
- Male to Micro USB Female Converter Connector
- USB stick
Software needed:
- Mi image 1.3.106:
yadi.sk/d/Yvr1jYflm6GZR or
dropbox.com/s/72x76khqjlpekap/MiBOX3_jurassicpark_gitv_1.3.106.386.zip
- Kingo root for windows
kingoapp dot com
First you will need to downgrade the firmware to version 1.3.106.
Extract the contents of the downloaded zip file to a formatted usb tick (Fat32).
(Should be two files: xiaomi_update and update.zip)
Put the stick in your Mi Box and boot in recovery: unplug power, press and hold back + ok button ( or Home and Menu while rebooting ) while plugging the power back in. The remote should be nearby and facing the box. Do not let go of the buttons until it booted in recovery. the flashing should start and finish automatically.
After first boot make sure you disable Intelligent Update.
Second step is to root your box with Kingo.
Enable USB/ADB debugging and reboot (it's right there in the menu under security settings).
Install Kingo root on your pc or laptop and connect your box using a micro usb charging cable. This is where you'll need the adapter. Start Kingo Root, follow instructions and choose 'Root again'.
This will take a minute... done!
Any question let me know I will be glad to help .
All credits to : passerby
venkat_shrine said:
Hi
Even I purchased it recently and can anyone guide me on this please.
Click to expand...
Click to collapse
It works great, the hardware is a beast! The only important issue I encountered so far is that sometimes it exits the video player, some other times just pauses the playback on Netflix, every 10 minutes or so. On You Tube it exits fullscreen mode, which can be quite annoying. The only solution I could find is this:
- In Settings (not the Chinese app, but the one that comes inside Shafa Market, or even better, make a google search for "startSettings.apk", download it , then install it on your Mi Box, this way you´ll no longer need Shafa Market), go to About the Phone section, and click repeatedly on the Build Version, till you are granted Developer rights.
- Back to Options, go to Developer Options, and change the number of background processes from Standard to None. You´ll have to repeat this last step every time the box reboots, but not after sleep/wake.
Done.
How did you install Google Services and does Play Store work ?
raducutzu said:
It works great, the hardware is a beast! The only important issue I encountered so far is that sometimes it exits the video player, some other times just pauses the playback on Netflix, every 10 minutes or so. On You Tube it exits fullscreen mode, which can be quite annoying. The only solution I could find is this:
- In Settings (not the Chinese app, but the one that comes inside Shafa Market, or even better, make a google search for "startSettings.apk", download it , the9n install it on your Mi Box, this way you´ll no longer need Shafa Market), go to About the Phone section, and click repeatedly on the Build Version, till you are granted Developer rights.
- Back to Options, go to Developer Options, and change the number of background processes from Standard to None. You´ll have to repeat this last step every time the box reboots, but not after sleep/wake.
Done.
Click to expand...
Click to collapse
samcex said:
How did you install Google Services and does Play Store work ?
Click to expand...
Click to collapse
I suppose you already have a bluetooth/wifi/usb keyboard/air mouse at hand, and switched to English by now, if not, please refer to this post:
http://www.cnx-software.com/2016/04/12/how-to-change-language-to-english-and-install-apps-remotely-on-xiaomi-mi-box-3-enhanced/
I skipped Shafa Market, I downloaded instead startSettings.apk from here:
https://www.google.es/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0ahUKEwjb6Ir4pcjNAhUCNhoKHaj6BdcQFgghMAA&url=https%3A%2F%2Fdrive.google.com%2Ffolderview%3Fid%3D0B16bkj0QSkYnfjc1YXQ1YU1sSGVGOHZqY3FjWUNabUVJd1dSTFpSb1BZbnU4cVZQMi1hMUk%26usp%3Dsharing&usg=AFQjCNE5hETwCJgxaa0KE0MtCkzU_tJF-w&sig2=Xk-SKY_nzqTE7aLmkhevZg
Copy it on a pendrive (you might want to copy the other apk-s for the next step, as well), then install it by inserting it in either USB port. You´ll be prompted to allow installation from unknown sources, click yes 允许. It´s all you need to have on your mi box for tweaking, like changing the language, instead of shafa market. Once opened, scroll down to the globe icon, and change it to English.
Then, follow really carefully this step-by-step guide, it´s a bit cumbersome, but it definitely works:
http://flying8pus.blogspot.com.es/
A few pointers, though:
1 - When rooting the device (the same thing here, use a pendrive, download all the apk-s you need on it, and install them from there), be patient, in some cases people had to wait a whole night for the 100% and the victor´s cup to show up. Check it out, and if it´s not done after 10-15 minutes, you´re out of luck, you might as well just go about your day, it will be over at some point. Make sure that in the mi box menu the sleep mode is disabled (set it from 30 minutes, I think, to Never), and don´t touch it, don´t open any apps, let 360Permroot do its magic.
2 - After installing Play Store DON´T OPEN IT! Install afterwards You Tube, then open this one. You´ll be prompted then to download Google Web Services (or something like that) in order to function properly. If you open Play Store before You Tube, you´ll never be prompted, and it will not work, at least that´s what I´ve been told, and I trust the guy (my brother).
Unfortunately, very few apps are recognised by Play Store as compatible with the device (luckily mx player is one of them), but you need it anyway, otherwise some Google services might not work. What I use instead for ease of use is uptodown app market, not even close as abundant as Play Store, but I get by. Once you install an app from there, it will update as soon as a newer version is available, and it´s not as picky as Play Store in terms of compatibility.
Take your time and good luck.
samcex said:
Hi there,
I managed to successfully root my Mi Box 3 w firmware 1.3.114 . Thought I'd share
Tools needed:
- Male to Micro USB Female Converter Connector
- USB stick
Software needed:
- Mi image 1.3.106:
yadi.sk/d/Yvr1jYflm6GZR or
dropbox.com/s/72x76khqjlpekap/MiBOX3_jurassicpark_gitv_1.3.106.386.zip
- Kingo root for windows
kingoapp dot com
First you will need to downgrade the firmware to version 1.3.106.
Extract the contents of the downloaded zip file to a formatted usb tick (Fat32).
(Should be two files: xiaomi_update and update.zip)
Put the stick in your Mi Box and boot in recovery: unplug power, press and hold back + ok button ( or Home and Menu while rebooting ) while plugging the power back in. The remote should be nearby and facing the box. Do not let go of the buttons until it booted in recovery. the flashing should start and finish automatically.
After first boot make sure you disable Intelligent Update.
Second step is to root your box with Kingo.
Enable USB/ADB debugging and reboot (it's right there in the menu under security settings).
Install Kingo root on your pc or laptop and connect your box using a micro usb charging cable. This is where you'll need the adapter. Start Kingo Root, follow instructions and choose 'Root again'.
This will take a minute... done!
Any question let me know I will be glad to help .
All credits to : passerby
Click to expand...
Click to collapse
Can you verify the model number on your box? Mdz-16-aa or mdz-16-ab? I did a bunch of research into rooting this box months ago and no one had found a way. I'm disappointed in the mdz-16-ab ever since I bought it. It has become more of a paper weight to me.
jholland92 said:
Can you verify the model number on your box? Mdz-16-aa or mdz-16-ab? I did a bunch of research into rooting this box months ago and no one had found a way. I'm disappointed in the mdz-16-ab ever since I bought it. It has become more of a paper weight to me.
Click to expand...
Click to collapse
I'm sorry I sold it 8 months ago.
Get rid of "Game play time xxh xxm" notification
Guys my Mibox 4k always has notification
Game play time xxh xxm
At the bottom left corner screen how to get rid of it please help thanks
Related
Hi all devs and members (ps.my first post)
As the title suggests, I need help rooting a Chinese Phone. Amoi n820
The device hardware is pretty awesome for the price, but I have problems
installing gApps as they are blocked on the phone.
I have attempted to root using Unlock Root "its supported?" but unsuccessful.
I have also been stalking Chinese forums
http://bbs.amoi.com.cn/viewthread.php?tid=4028
and
http://products.mobileuncle.com/thread-157352-1-2.html
but have failed to root the device
I believe that the main problem is that the phone driver is not being properly installed.(ps tried the usb fix as prescribed in the 2nd link).
Anyone knows how to fix this?
Cheers
did you manage to do it....?
Found this in a german forum:
http://translate.google.de/translat...-Tutorials-Anleitungen&highlight=n820&act=url
Thanks, holybabel.
Using this it took me less than 10 minutes to root the N820 after receiving it.
So far, the only downside I've found is that you loose the back camera (the button for switching between front/back camera is missing, and the front camera is the default).
Cookbook
(No links due to new-user brainfart limitations on XDA. very helpful, thank you).
This (Chinese) posting explains how to install the V6.0 ROM with root,Google play etc:
bbs(dot)amoi(dot)com.cn(slash)viewthread.php?tid=7755&extra=page=1
Alternatively, download this package: pan(dot)baidu(dot)com(slash)share(slash)link?shareid=64032&uk=4130302605 which contains all you need (USB driver, Flash utility and the "perfect ROOT" ROM v6.0 image).
0) Back up all data on cellphone, charge it to at least 60% battery, do not connect it to the PC yet, and TURN IT OFF. Plug in USB end of the USB - micro-USB cable into the PC.
1) Unpack the RAR package
2) Rename directory to remove all Chinese characters
3) Unpack the N820_V6.0_ROOT_GMS.rar file (unpacks to N820_V6.0_ROOT_GMS).
4) Go into the 'USB驱动' directory, unzip and install the USB VCOM driver.
5) Go into the '刷机工具' directory and double-click on the Flash_tool.exe file. Click on "Scatter-loading" and point to the N820_V6.0_ROOT_GMS\MT6577_Android_scatter_emmc.txt.
6) Hit F8 or click on 'Firmware -> Upgrade'.
7) Hold down the Volume Down button and connect the phone to the PC. The button can be released when the red bar starts moving.
8) After "Firmware Upgraded" window shows, unplug phone, reboot, install and enjoy.
Pictures (and Chinese explanation) can be found here: www(dot)xiaomifood(dot)com(slash)N820V6.0ROM(slash)
Did you manage to get the rear camera back?
I've tried several roms, but none have made the rear camera work again...
duendecillo1982 said:
Did you manage to get the rear camera back?
I've tried several roms, but none have made the rear camera work again...
Click to expand...
Click to collapse
Yes, with the referenced ROM everything is working, including the rear camera
Retteren said:
Yes, with the referenced ROM everything is working, including the rear camera
Click to expand...
Click to collapse
Will be trying that shortly
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
nkhater said:
Will be trying that shortly
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It worked, but the SU is all in Chinese, no idea what to click or chose
nkhater said:
It worked, but the SU is all in Chinese, no idea what to click or chose
Click to expand...
Click to collapse
Oh come on the settings button should be global for android despite the chinese.
Clicking on that you get the menu where the small A icon is for the language and then the first choice is the language change. English should be visible in the list there (hopefully)
Retteren said:
(No links due to new-user brainfart limitations on XDA. very helpful, thank you).
This (Chinese) posting explains how to install the V6.0 ROM with root,Google play etc:
bbs(dot)amoi(dot)com.cn(slash)viewthread.php?tid=7755&extra=page=1
Alternatively, download this package: pan(dot)baidu(dot)com(slash)share(slash)link?shareid=64032&uk=4130302605 which contains all you need (USB driver, Flash utility and the "perfect ROOT" ROM v6.0 image).
0) Back up all data on cellphone, charge it to at least 60% battery, do not connect it to the PC yet, and TURN IT OFF. Plug in USB end of the USB - micro-USB cable into the PC.
1) Unpack the RAR package
2) Rename directory to remove all Chinese characters
3) Unpack the N820_V6.0_ROOT_GMS.rar file (unpacks to N820_V6.0_ROOT_GMS).
4) Go into the 'USB驱动' directory, unzip and install the USB VCOM driver.
5) Go into the '刷机工具' directory and double-click on the Flash_tool.exe file. Click on "Scatter-loading" and point to the N820_V6.0_ROOT_GMS\MT6577_Android_scatter_emmc.txt.
6) Hit F8 or click on 'Firmware -> Upgrade'.
7) Hold down the Volume Down button and connect the phone to the PC. The button can be released when the red bar starts moving.
8) After "Firmware Upgraded" window shows, unplug phone, reboot, install and enjoy.
Pictures (and Chinese explanation) can be found here: www(dot)xiaomifood(dot)com(slash)N820V6.0ROM(slash)
Click to expand...
Click to collapse
Help Please!
I followed these directions and now am getting an "Invalid IMEI" error.
I found these instructions for restoring it - bbs(dot)amoi(dot)com.cn/viewthread.php?tid=8777&highlight=imei
But "mobile uncle tools" is in Chinese - parts of it are translated but not all, and I don't want to select something not totally sure of what it is doing.
where to buy
sandyjagmin said:
Help Please!
I followed these directions and now am getting an "Invalid IMEI" error.
I found these instructions for restoring it - bbs(dot)amoi(dot)com.cn/viewthread.php?tid=8777&highlight=imei
But "mobile uncle tools" is in Chinese - parts of it are translated but not all, and I don't want to select something not totally sure of what it is doing.
Click to expand...
Click to collapse
where did you guys buy your Amoi N820s from i would really like to get one.
hi,
http://www.cect-shop.com/en/amoi-n820.html?___from_store=de
:good:
How much did you pay for it? I mean WITH delivery, zoll, problems...
Sent from my Wildfire using xda app-developers app
I've paid 189,98 € (ca. 245,- $). All inclusive from HongKong to Germany (DHL Express).
Retteren said:
Yes, with the referenced ROM everything is working, including the rear camera
Click to expand...
Click to collapse
What do you mean by referenced ROM ? which one ? I'm a bit lost
Thanks
@Cipriot: Imho it's pan(dot)baidu(dot)com(slash)share(slash)link?shareid=64032&uk=4130302605 - the one Retteren described procedure for.
@Others: I have Amoi N821 since last week and I'm not sure which ROM/archive I should use to root and have Play Store. Can I use N820 files, or is there similar package for N821? Current system says "Android version: 4.0.4; Build number N821_V2.1". I suppose the update package is different for N821, so if anybody knows about such, the link would be highly appreciated!
After I got the new ROM and changed the language in english I still got the Root app in chinesse
What can I do ?
N821
Hello,
I have succefully rooted amoi n821.
Now I can't find out what to do next. Play store doens't work.. Can I use a n820 rom?
I would really appreciate some help!
pkip1 said:
Hello,
I have succefully rooted amoi n821.
Now I can't find out what to do next. Play store doens't work.. Can I use a n820 rom?
I would really appreciate some help!
Click to expand...
Click to collapse
N820 ROM on N821 will screw display up. I've managed to root it and install google apps/market. If anyone wants, I can write up a nice howto. So far I've written a small review of it on my blog: dfourn.com
So, I got a Zte Avid Plus z828 (t mobile no sim card) that has frp so basically i cant get pass the google account verification screen. I have found a way to get into the settings and enable developer mode without no otg method or apk methods. I simply used the text to speech method where i open the source for that and then open up google and search settings allowing me to access the settings and enable developer mode via build version.
Now here's the problem I can click backup and reset but when i actually click RESET PHONE nothing happens. I can keep on clicking it and nothing will happen it's a button thats just there. I want to enable USB debugging with hopes of using adb shell and wiping the phone that way but i can't even access the developer settings. I click on the developer settings and nothing happens its the same situation with the RESET PHONE option. Why is this occurring? Anyone have any advice as to how i can get around this? I've tried downloading apks that would open the developer settings but it opens for less then a second then instantly closes. I'm new here so i'm not even sure if this is where i was supposed to even post this, sorry if it wasn't the correct place to post this. if you need me to elaborate anymore just ask, i'll gladly do it.
Hello Friend!! I also have the same problem with this phone. but I have not been able to enter the menu. as you could enter the menu of the z828? Thank you
Sent from my D6503 using Tapatalk
kazador07 said:
Hello Friend!! I also have the same problem with this phone. but I have not been able to enter the menu. as you could enter the menu of the z828? Thank you
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Yeah I'll make a short guide I can try to post screenshots later but for now i'll try my best to guide you to the point where I am.
1. Go through the setup until you get to the google verifying part.
2. Open up your keyboard and hold down the comma to access the gear which will allow you to get into the google keyboard settings.
3. Once you're at the google keyboard settings go to Text Correction.
4. Then go to Personal Dictionary and select English (US) or whatever you have there.
5. Then click on the search button and just type random letters and hit search is what i did to get to this next step.
6.. You should be able to type in the letter "g" and you should see something called google voice typing
7. click that and go to Text-to-speech.
8. Then click the blue gear next to google text to speech
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
14. delete whatever is on the search and type in settings the option to access the settings should pop up on the bottom as a suggestion.
15. click that and now you're at the settings.
From here on i assume you know how to access the about phone and turn on developer settings but this is the problem you can turn it on but you cant access the developer menu you can just click it and nothing will happen. same for trying to reset the phone from the back up and reset menu.
if anybody knows what the case may be please let me know i'm constantly trying to find the solution to this whenever i have the free time but so far no solution has came up. i am able to download apks by instead of typing in settings on the google search i type in file manager and simply transfer over the apk through my pc onto the phone. that i can do without usb debugging becasue my pc picks the phone up as a portable device.
I fixed the zte avid plus z828 frp problem!
Dont mean to double post but after a week of trial and error I solved the problem. I bypassed the FRP and Hard resetted the phone. Phone's working 100% now. I can probably post a guide somewhere I guess if highly requested.
Feel free to close the thread as the problem is solved
~
please do!!!!
Yerhope said:
Dont mean to double post but after a week of trial and error I solved the problem. I bypassed the FRP and Hard resetted the phone. Phone's working 100% now. I can probably post a guide somewhere I guess if highly requested.
Feel free to close the thread as the problem is solved
~
Click to expand...
Click to collapse
Hello yerhope!
from your last report on zte z828 frp bypass, i understood that you finally fix the , not able to access the Developer option nor access the factory reset. I am very keen to know how you did it.
I am a victim of this same circumstance.
guide please?
cant click reset my self
Hey, I would like to highly request the tutorial....
Furthermore, I'd like to say I've poured over these sort of sites, rephrased my questions, etcetc all trying to get the same things accomplished, getting past the google password, and yet you with your quick clearly stated actually step by step explanation were the one to get me the farthest in fixing this problem. :highfive:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
digitalchaos1980 said:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
Click to expand...
Click to collapse
can root and remove with gcpro.
thats what i did. with this, even wen u get into settings and tap factory reset, ntn will happen.
re: zte z828 resolved problem???
digitalchaos1980 said:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
Click to expand...
Click to collapse
He said he resolved problem but put no feedback so others can benefit, I really doubt he resolved the problem of bypassing or unlocking or rooting his phone, he probably slammed it on the floor and resolved the problem that way. We don't need people like that here. I will try it when I get a zte z828 from someone that has the same problem, I will post feedback if I am successful or not, so by July 15, 2016, I should now if it is possible.
xdauser9981 said:
He said he resolved problem but put no feedback so others can benefit, I really doubt he resolved the problem of bypassing or unlocking or rooting his phone, he probably slammed it on the floor and resolved the problem that way. We don't need people like that here. I will try it when I get a zte z828 from someone that has the same problem, I will post feedback if I am successful or not, so by July 15, 2016, I should now if it is possible.
Click to expand...
Click to collapse
He did get in. I did get in myself but when i tap factory reset nothing happen.
(Security patched)
Maybe he did resolve it like i did.
Root and remove it with gcpro
Thats what i did.
On some ZTE phones (has worked on 1 but not another for me), you can use the emergency dialer to dial:
*983*987#
This will lead you directly into factory reset options (if it works).
Solution worked on Acer Iconia B1-850 Tablet
Yerhope said:
Yeah I'll make a short guide I can try to post screenshots later but for now i'll try my best to guide you to the point where I am.
1. Go through the setup until you get to the google verifying part.
2. Open up your keyboard and hold down the comma to access the gear which will allow you to get into the google keyboard settings.
3. Once you're at the google keyboard settings go to Text Correction.
4. Then go to Personal Dictionary and select English (US) or whatever you have there.
5. Then click on the search button and just type random letters and hit search is what i did to get to this next step.
6.. You should be able to type in the letter "g" and you should see something called google voice typing
7. click that and go to Text-to-speech.
8. Then click the blue gear next to google text to speech
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
14. delete whatever is on the search and type in settings the option to access the settings should pop up on the bottom as a suggestion.
15. click that and now you're at the settings.
From here on i assume you know how to access the about phone and turn on developer settings but this is the problem you can turn it on but you cant access the developer menu you can just click it and nothing will happen. same for trying to reset the phone from the back up and reset menu.
if anybody knows what the case may be please let me know i'm constantly trying to find the solution to this whenever i have the free time but so far no solution has came up. i am able to download apks by instead of typing in settings on the google search i type in file manager and simply transfer over the apk through my pc onto the phone. that i can do without usb debugging becasue my pc picks the phone up as a portable device.
Click to expand...
Click to collapse
Solution!
Yerhope said:
So, I got a Zte Avid Plus z828 (t mobile no sim card) that has frp so basically i cant get pass the google account verification screen. I have found a way to get into the settings and enable developer mode without no otg method or apk methods. I simply used the text to speech method where i open the source for that and then open up google and search settings allowing me to access the settings and enable developer mode via build version.
Now here's the problem I can click backup and reset but when i actually click RESET PHONE nothing happens. I can keep on clicking it and nothing will happen it's a button thats just there. I want to enable USB debugging with hopes of using adb shell and wiping the phone that way but i can't even access the developer settings. I click on the developer settings and nothing happens its the same situation with the RESET PHONE option. Why is this occurring? Anyone have any advice as to how i can get around this? I've tried downloading apks that would open the developer settings but it opens for less then a second then instantly closes. I'm new here so i'm not even sure if this is where i was supposed to even post this, sorry if it wasn't the correct place to post this. if you need me to elaborate anymore just ask, i'll gladly do it.
Click to expand...
Click to collapse
Okay, I spent more time than i care to admit on getting through this frp. I have z3x and a few other utilities and i use them when i can, but i don't honestly lay hands on ZTE very often. Anyway, you do NOT need GC or any other box--
so following the last poster's steps (credit to yerhope):
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
this is where he leaves off... and where i pick up.
14. Download "quickshortcut maker" apk to your computer (or copy from apk extractor on a phone or any other method..
15. Select z828 in my computer and copy quickshortcut maker to downloads
16. On the phone, after clicking the search button, clear the browser box and type in "file manager" - it will show up just below. select it
17. Go to downloads in the file manager and select quickshortcut maker
18. install the app, blah blah blah
19. Once in the app, search "google account" you will have several pop up
20. Select the one that says "email and password" when you do, it will ask for a password to an account you aren't sure of.
21. click menu on top right - Browser sign in is the option - click it
22. Sign in to your email and account
23. Once you are signed in, press and hold power for a soft reset (restart)
24. Proceed as usual to wifi page and BOOM!
25. Profit. not much though, cuz its still a ZTE.
o12VOLTSo said:
Okay, I spent more time than i care to admit on getting through this frp. I have z3x and a few other utilities and i use them when i can, but i don't honestly lay hands on ZTE very often. Anyway, you do NOT need GC or any other box--
so following the last poster's steps (credit to yerhope):
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
this is where he leaves off... and where i pick up.
14. Download "quickshortcut maker" apk to your computer (or copy from apk extractor on a phone or any other method..
15. Select z828 in my computer and copy quickshortcut maker to downloads
16. On the phone, after clicking the search button, clear the browser box and type in "file manager" - it will show up just below. select it
17. Go to downloads in the file manager and select quickshortcut maker
18. install the app, blah blah blah
19. Once in the app, search "google account" you will have several pop up
20. Select the one that says "email and password" when you do, it will ask for a password to an account you aren't sure of.
21. click menu on top right - Browser sign in is the option - click it
22. Sign in to your email and account
23. Once you are signed in, press and hold power for a soft reset (restart)
24. Proceed as usual to wifi page and BOOM!
25. Profit. not much though, cuz its still a ZTE.
Click to expand...
Click to collapse
Does this mean you have confirmed this on ZTE?
Yerhopes solution worked for my zte lever
Follow yerhopes solution after step 15 while in settings go to backup and reset make sure back up data is off then factory reset erase Everything phone will reboot old owners info gone no need to download anything worked for 2 Zte levers i bought from ebay.
Bought a EE Jay Tablet (also a ZTE tablet) that had FRP enabled, easiest way I could do it was
1. connect to wifi, get to the previous account required screen.
2. open the keyboard and hold the @ symbol and open the keyboard settings.
3. top right corner press the 3 dots and choose help and type in apps in the search box.
4. access the app settings screen via the link from the help section then goto all and launch settings app
5. enable unknown sources in security and return to app settings screen and launch chrome this time or any browser.
6. goto http://rootjunkysdl.com/files/?dir=Apps and download this file com.sika524.android.quickshortcut.apk
7. you may get a download notification that the file has finished if not go back again to the app settings screen and all again and launch downloads app
8. you will now see the file download open it and install and then open the app
9. in the quick shortcut app search for google account and choose email and password and select try
10. now the google accounts manager has launched, in the top right corner press the 3 dots and choose browser sign-in
11. sign in with a google account and once done it will close and go back to the quick shortcut maker.
12. you still won't have access yet but all I done was reboot the device and continued the setup, this time there was no errors or required sign in and had full access.
Hope this helps someone, this was basically a copy of this video which may be helpful https://www.youtube.com/watch?v=GKdVvBSIb0M
Idk wat im doing but watever I do cant make crap any worse so I went under security and theres a place says trusted agents I clicked that and it said google smart lock so I turned it off im hoping this works guys ill let u know
yes
Arykit said:
Does this mean you have confirmed this on ZTE?
Click to expand...
Click to collapse
I used this method, personally, for zte Avid I believe. Yerhope's solution works for some firmwares prior to firmware i was on. i'm sorry, i do not recall that at this moment as it was some time ago. if Yerhope's solution is not effective for you, then progresss to my steps that pick up right where previous solution left off. so once again, YES, this worked on my device, did not test for others. my understanding is kingo can acquire root access in a special way as well that will allow you to adb clear frp. looking for commands? i do not have them sorry.
I have 2 different android boxes, on the KIII tv box, I like to run torrents while I watch youtube videos. Problem is with this box it closes the app as soon as I switch to another.
I already check the box in developer settings to not kill any apps in background, It still does.
Is it something I'm missing? My mini mx does not do this is this just a KIII thing, where I can only run 1 app at a time?
Sent from my SM-G935V using XDA-Developers mobile app
Its something in the built.prop, in the past i knew what to change but i forgot it...
dammit i got the same problem with my friends box. mine is fixed for this problem but i cant remember how i did it...
can no one help ?
Finally found it....
So you have to use a explorer with root access and delete or edit "allowbackgroundapp.list" located at "/system/etc"
I use to edit the list and add the names of apps i wanne run in the background, like "org.xbmc.kodi" , "tv.twitch.android.app" or "org.mozilla.firefox".
Actually pretty easy, hope i could
Question is what is with you box ?! Start in Bluescreen, bootloop, go into a mode !? My english is not the best but the first idea is download the stock rom version and flash it with Burn USB Card on a SD card (you must format it in the tool) and then it will work i think.
If it not work, use USB burning tool but you need a male 2 male usb cable for it.
I have flash my box today with a wrong custom rom and have only a bluescreen (shoot my Mainboard driver i think or HDMI) but with a stock ROM i have start a flash and an half hour later (i cant see what the box do) i make the box power of and the box start nice again.
Please tell us what for a box you have, what for a CPU and RAM version and the name of the box.
In China the guys clone a clone :S its hard to help. Best way for flashing is to open the box and look on the chips what you have
Hi All
If You Own a LeEco X4 series tv then you must know that LeEco will not give any future Updates to the tv. Many of you want the play store Support and Google Play Services support..
We are happy to inform you that we have successfully Installed play store and play services on the X4 series.
We Also Thank our developers Who made it possible -
1) Roman Kent
2)Nanerasingh Manu
3)Neekz
4) Dipcore
5)Prateek Kejriwal
Also you can install any custom launcher..
Please Join The Telegram Group For Further Help -
MOD EDIT: LINK REMOVED
There are many links So will share them soon.. Until then please join the telegram group.
EUI Version
CHINA with Play Store and Play Services - EUI 6.5
US (Android Aosp) - EUI 5.8.057S
Awesome! performing the upgrade to 6.5 today!
OK, I've got it installed EUI 6.5 rooted, but I can't seem to get Gapps installed for the life of me. using the script calls ADB, but I can't figure out how to enable debugging in my TV to allow that.. The new UI is just too different to locate what I need to do.
I take no credit for any of this work. I'm just a user who found the instructions vague and confusing. So once I figured out what I needed, I decided to document it here.
OK, I've gone through all the steps. Its kinda clunky but it works. I'll first warn you if Netflix is your thing, this probably isn't for you.
Netflix does work, but you're required to use the phone/tablet app from PUREApk. This evidently reduces the video quality quite a bit.
It was noticeable for me. Felt like I was watching somewhat artifacty 720p. To get there I had to enable settings for video quality to "HIGH" otherwise it showed up in SD which was way worse.
So if you enjoy 1080P or 4K netflix, this is not your upgrade. Also, if you don't wish to be forced to use keyboard/mouse. this is NOT your upgrade. If none of that matters to you, by all means feel free!
Step 1) First flash EUI 6 BIN FILE https://drive.google.com/file/d/1HBiM2WAllOQ43ONI7Jk3Gaey6P8FYDmo/view
To do that you must format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
You'll notice the TV comes on in chinese. If you need english use the google translate app and camera to convert chinese to english.
Get to home screen, press settings button, go to bottom System Settings, another menu will slide out, then General (3rd option down),
Next go to Time and settings (second option down), Go to right pane and 3rd/bottom option will be language. Select English.
Step 2) upgrade to 6.5 via offline update zip. DO NOT USE THE ROOTED BIN FILE YET, you'll have to start over if you do.
Download https://drive.google.com/file/d/1rbov4oeMUh49rSF2hvUPvoTqRXGbThYS/view and place it on the FAT32 flashdrive.
After skipping through the tutorials and jazz, go to the apps pane (press right button a few times) and go to system update -> offline update -> choose 6.5 zip file.
Step 3) Flash 6.5 rooted bin file https://mega.nz/#!GIYCxQLB!V2jBnfH0K5-DzUUWy6_RegDlnhglxpWJhVa8yd5NVKE
Basically repeating step 1, but now with the 6.5 rooted bin file. Congrats, you're rooted.
Step 4) Download the GApps install tool. https://drive.google.com/open?id=1DHViq0yJ_-RlV3LQ_BuQsxIKEk2ip7ZB
Be warned, this requires windows and isn't as straight forward as you'd hope. The app doesn't work until USB Debugging is enabled.
Also, you won't be doing this over USB. It'll be connecting ADB over Network. To do this you need to:
Go back to system setting where you changed language, but go down to saftey and enable "Application of Unknown Origin".
Now we need to sideload apps.
download https://apkpure.com/usb-debugging/com.bluedragonfly.developeroptions to the flash drive, and use the file manager to locate/install it.
download also https://forum.xda-developers.com/showthread.php?t=1687590[/url] ADBD.apk to the flash drive and use the file manager to locate/install it
Open the first app and enable USB Debugging. Then open the second app to enable insecure ADB.
Now the janky GApps batch script should work. You'll want to perform actions 1, 2, and 3.
Sadly, this will factory reset your TV once again, and you'll have to go through the setup, but its no big deal.
Now if you want extra packages I suggest sideloading the PUREApk app from https://apkpure.com/. this will help you install the Netflix mobile app.
If you want to enable HDMI CEC by neekzz, Place https://mega.nz/#!aQQgiDyQ!ih9K6-rZ0yQoToDPoqAg93AN6Cy3L5JNsdMw7Fy-ADc
on the system/lib64/hw . Then turn off the receiver. Restart the TV... You'll need to know how to use adb to push the file.
REVERT ) So you've decided you've made a grave error, or don't care for some quirks, whatever the case may be, time to go back to US FW.
Step 1) Download US Stock firmware BIN file. https://mega.nz/#!fcwxGQ5I!FmO4xArY4ObmittoVNfnE21utvy8kkSSnTJFR9UXA3I
Format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
Step 2) Upgrade to last known US firmware available. Download the file from the following link:
http://g3.letv.cn/263/6/84/scmauto/...C058056B04201S_5.8.056S_0420_USER.zip?retry=0
Place the zip file on the flash drive. Go to System Update app and perform an Offline update and select the zip file.
And you're done. Welcome back.
Step 3) you may have some issues with Google Play Services constantly crashing. Latest Google Play services needs a newer version of Google play services to be installed .
Ridiculous, I know. Side loading the latest Google Play services apk can help resolve your issue. Download the apk from:
https://www.apkmirror.com/apk/google-inc/google-play-services-android-tv/
Put it on your flash drive. Go to settings > Security > and Allow Unknown Sources.
Open File Manager > APK > and select Google Play services apk.
[Recovery] LeTV Super4 (4th generation) :: All Mstar 6a938 based models supported
I want to leeco tv android oreo custom rom
I want to any custom oreo rom for leeco tv it is possible or not.
telegram group for LeEco
Souviktechguy said:
Hi All
If You Own a LeEco X4 series tv then you must know that LeEco will not give any future Updates to the tv. Many of you want the play store Support and Google Play Services support..
We are happy to inform you that we have successfully Installed play store and play services on the X4 series.
We Also Thank our developers Who made it possible -
1) Roman Kent
2)Nanerasingh Manu
3)Neekz
4) Dipcore
5)Prateek Kejriwal
Also you can install any custom launcher..
Please Join The Telegram Group For Further Help -
MOD EDIT: LINK REMOVED
There are many links So will share them soon.. Until then please join the telegram group.
Click to expand...
Click to collapse
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
blk4004 said:
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
Click to expand...
Click to collapse
Not possible. Per forum rule #5, promoting social media is not allowed on XDA.
What is the magic to get Google Assistant 3.0 or higher working on a LeEco x4-55? It seems to always crash right after sign-in process.
routerhacker said:
What is the magic to get Google Assistant 3.0 or higher working on a LeEco x4-55? It seems to always crash right after sign-in process.
Click to expand...
Click to collapse
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
I have the LeEco 43 in bedroom....so frustrated, it is connected to the internet. I have cut the cable and using apps. Every time I turn the tv off...and then turn on later it will not upload the apps....I unplug the tv for a minute...then turn on and the apps load. I am not that tech savvy and would appreciate any help you might offer
Stuck
Darksurf said:
I take no credit for any of this work. I'm just a user who found the instructions vague and confusing. So once I figured out what I needed, I decided to document it here.
OK, I've gone through all the steps. Its kinda clunky but it works. I'll first warn you if Netflix is your thing, this probably isn't for you.
Netflix does work, but you're required to use the phone/tablet app from PUREApk. This evidently reduces the video quality quite a bit.
It was noticeable for me. Felt like I was watching somewhat artifacty 720p. To get there I had to enable settings for video quality to "HIGH" otherwise it showed up in SD which was way worse.
So if you enjoy 1080P or 4K netflix, this is not your upgrade. Also, if you don't wish to be forced to use keyboard/mouse. this is NOT your upgrade. If none of that matters to you, by all means feel free!
Step 1) First flash EUI 6 BIN FILE https://drive.google.com/file/d/1HBiM2WAllOQ43ONI7Jk3Gaey6P8FYDmo/view
To do that you must format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
You'll notice the TV comes on in chinese. If you need english use the google translate app and camera to convert chinese to english.
Get to home screen, press settings button, go to bottom System Settings, another menu will slide out, then General (3rd option down),
Next go to Time and settings (second option down), Go to right pane and 3rd/bottom option will be language. Select English.
Step 2) upgrade to 6.5 via offline update zip. DO NOT USE THE ROOTED BIN FILE YET, you'll have to start over if you do.
Download https://drive.google.com/file/d/1rbov4oeMUh49rSF2hvUPvoTqRXGbThYS/view and place it on the FAT32 flashdrive.
After skipping through the tutorials and jazz, go to the apps pane (press right button a few times) and go to system update -> offline update -> choose 6.5 zip file.
Step 3) Flash 6.5 rooted bin file https://mega.nz/#!GIYCxQLB!V2jBnfH0K5-DzUUWy6_RegDlnhglxpWJhVa8yd5NVKE
Basically repeating step 1, but now with the 6.5 rooted bin file. Congrats, you're rooted.
Step 4) Download the GApps install tool. https://drive.google.com/open?id=1DHViq0yJ_-RlV3LQ_BuQsxIKEk2ip7ZB
Be warned, this requires windows and isn't as straight forward as you'd hope. The app doesn't work until USB Debugging is enabled.
Also, you won't be doing this over USB. It'll be connecting ADB over Network. To do this you need to:
Go back to system setting where you changed language, but go down to saftey and enable "Application of Unknown Origin".
Now we need to sideload apps.
download https://apkpure.com/usb-debugging/com.bluedragonfly.developeroptions to the flash drive, and use the file manager to locate/install it.
download also https://forum.xda-developers.com/showthread.php?t=1687590[/url] ADBD.apk to the flash drive and use the file manager to locate/install it
Open the first app and enable USB Debugging. Then open the second app to enable insecure ADB.
Now the janky GApps batch script should work. You'll want to perform actions 1, 2, and 3.
Sadly, this will factory reset your TV once again, and you'll have to go through the setup, but its no big deal.
Now if you want extra packages I suggest sideloading the PUREApk app from https://apkpure.com/. this will help you install the Netflix mobile app.
If you want to enable HDMI CEC by neekzz, Place https://mega.nz/#!aQQgiDyQ!ih9K6-rZ0yQoToDPoqAg93AN6Cy3L5JNsdMw7Fy-ADc
on the system/lib64/hw . Then turn off the receiver. Restart the TV... You'll need to know how to use adb to push the file.
REVERT ) So you've decided you've made a grave error, or don't care for some quirks, whatever the case may be, time to go back to US FW.
Step 1) Download US Stock firmware BIN file. https://mega.nz/#!fcwxGQ5I!FmO4xArY4ObmittoVNfnE21utvy8kkSSnTJFR9UXA3I
Format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
Step 2) Upgrade to last known US firmware available. Download the file from the following link:
http://g3.letv.cn/263/6/84/scmauto/...C058056B04201S_5.8.056S_0420_USER.zip?retry=0
Place the zip file on the flash drive. Go to System Update app and perform an Offline update and select the zip file.
And you're done. Welcome back.
Step 3) you may have some issues with Google Play Services constantly crashing. Latest Google Play services needs a newer version of Google play services to be installed .
Ridiculous, I know. Side loading the latest Google Play services apk can help resolve your issue. Download the apk from:
https://www.apkmirror.com/apk/google-inc/google-play-services-android-tv/
Put it on your flash drive. Go to settings > Security > and Allow Unknown Sources.
Open File Manager > APK > and select Google Play services apk.
Click to expand...
Click to collapse
I have done the US din and update after i accidentally moved my internal memory to a 3.1 drive. After doing the updates and google play store and services does its updates my screen flickers and a grey screen comes up with a black strip ontop. I have to press back on my remote until it comes up again. Many times back to back. I have to wipe my tv to get it to stop but after updates the same thing happens. Do you think you can help?
the Doctor said:
Not possible. Per forum rule #5, promoting social media is not allowed on XDA.
Click to expand...
Click to collapse
How do i post links for other firmware.. Xda is not allowing me to post firmware link as well!
Toni247C said:
I have done the US din and update after i accidentally moved my internal memory to a 3.1 drive. After doing the updates and google play store and services does its updates my screen flickers and a grey screen comes up with a black strip ontop. I have to press back on my remote until it comes up again. Many times back to back. I have to wipe my tv to get it to stop but after updates the same thing happens. Do you think you can help?
Click to expand...
Click to collapse
Clear showtime app and force stop... It will resolve your problem
blk4004 said:
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
Click to expand...
Click to collapse
Search TECHNITURE channel on youtube for more help..
You don't have to unplug the tv, hold the power button down for like 4 seconds to fully power the tv down, that works for me.
我是香港用戶。我成功刷了美國5.8 Rom，但無法搜索香港電視信號。如何將ATAC轉換為DTMB？
Hi my name is lawal am using leeco tv can some help me with new update please
Please some one should help me with new update for leeco tv please thank you all
In my process of unlocking the bootloader for my Realme X3 SuperZoom, I hit an error in the In-Depth Test app that told me I had a "carrier-customized" device and thus couldn't continue. I figured out how to get around this without needing root. All you need is a Windows computer, ADB, and a super shady program (I've tested it and there don't seem to be any viruses in it). Let's get started.
Bootloader unlock guide: https://forum.xda-developers.com/x3-superzoom/how-to/guide-unlock-bootloader-realme-x3-t4136325/.
WARNING: this won't wipe your personal data, but it does appear to clear WiFi passwords.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose the first one: "Multilingual Version Ex".
Your phone should now reboot. Once it's rebooted, your region will have changed and you should be able to use the In-Depth Test app to unlock your bootloader.
In theory, changing your region like this should work on any OPPO/Realme device running at least Android Pie (9). It may even work on earlier versions.
NOTE: This will not work for Chinese variants. These codes are filtered and will only work for international variants. However, the Chinese variants should be immediately unlockable.
-----
UPDATE:
It seems like OPPO caught onto this program. That MAC address is no longer accepted. However, there is a workaround (thanks to @Sonic Steven).
If you set the custom MAC on any adapters, remove it.
If you have the Secrecy program running, close it.
Disable any Ethernet/wired/virtual adapters, leaving only WiFi enabled. If you don't have a WiFi adapter, you may be able to leave Ethernet enabled, but it isn't guaranteed to work.
In Device Manager, click the root of the device tree (it should be your computer's name).
Open the "Action" menu and click "Add legacy hardware".
Click "Next" and select "Install the hardware that I manually select from a list (Advanced)".
Click "Next" again and select "Network adapters" in the list.
Click "Next" again. Once it loads, select "Microsoft" in the "Manufacturer" list.
In the "Model" list, select "Microsoft KM-TEST Loopback Adapter" (the name may be slightly different on other systems; select the one that has "Loopback Adapter" in the name).
Click "Next" twice to begin the installation.
Once the installation is complete, you should be able to reopen the Secrecy program and decrypt.
NOTE: The Secrecy program requires a working internet connection. It connects to OPPO's servers and performs some sort of authentication.
Zacharee1 said:
In my process of unlocking the bootloader for my Realme X3 SuperZoom, I hit an error in the In-Depth Test app that told me I had a "carrier-customized" device and thus couldn't continue. I figured out how to get around this without needing root. All you need is a Windows computer, ADB, and a super shady program (I've tested it and there don't seem to be any viruses in it). Let's get started.
Bootloader unlock guide: https://forum.xda-developers.com/x3-superzoom/how-to/guide-unlock-bootloader-realme-x3-t4136325/.
WARNING: this won't wipe your personal data, but it does appear to clear WiFi passwords.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose the first one: "Multilingual Version Ex".
Your phone should now reboot. Once it's rebooted, your region will have changed and you should be able to use the In-Depth Test app to unlock your bootloader.
In theory, changing your region like this should work on any OPPO/Realme device running at least Android Pie (9). It may even work on earlier versions.
Click to expand...
Click to collapse
Thanks a lot (understatement) I will try follow your advice..
Does Unlocking the bootloader of Realme X3 SuperZoom, bricks the fingerprint sensor(Side-Mounted)???
Didn't passed step no. 13
I already tried but didn't passed step no. 13
---------- Post added at 01:01 AM ---------- Previous post was at 12:58 AM ----------
Zacharee1 said:
In my process of unlocking the bootloader for my Realme X3 SuperZoom, I hit an error in the In-Depth Test app that told me I had a "carrier-customized" device and thus couldn't continue. I figured out how to get around this without needing root. All you need is a Windows computer, ADB, and a super shady program (I've tested it and there don't seem to be any viruses in it). Let's get started.
Bootloader unlock guide: https://forum.xda-developers.com/x3-superzoom/how-to/guide-unlock-bootloader-realme-x3-t4136325/.
WARNING: this won't wipe your personal data, but it does appear to clear WiFi passwords.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose the first one: "Multilingual Version Ex".
Your phone should now reboot. Once it's rebooted, your region will have changed and you should be able to use the In-Depth Test app to unlock your bootloader.
In theory, changing your region like this should work on any OPPO/Realme device running at least Android Pie (9). It may even work on earlier versions.
NOTE: This will not work for Chinese variants. These codes are filtered and will only work for international variants. However, the Chinese variants should be immediately unlockable.
Click to expand...
Click to collapse
I already tried but didn't passed step no. 13
my device doesnt come up i have mtp on and its not working, if i click unlock my device pops up but nothing is in right lane. any ideas australian oppo find x2 pro
---------- Post added at 12:46 PM ---------- Previous post was at 12:28 PM ----------
my device doesnt come up i have mtp on and its not working, if i click unlock my device pops up but nothing is in right lane. any ideas australian oppo find x2 pro
same Find X2 Pro sec5 dont show ok on the right side
hello
with oppo a9 2020;
does not work, I start the procedure with Sec5.exe it recognizes the device but does not give the ok; the same thing happens when you start secrecy.exe!
How can I solve?
@Zacharee1
I think this thread should be moved to https://forum.xda-developers.com/f/android-general.1424/, since it is not only for Realme X3 SuperZoom.
This solution is also applicable to RealmeC11(RMX2185).
credit to:
@Zacharee1
@HemanthJabalpuri
yeah i dont think this works anymore..
Sage said:
yeah i dont think this works anymore..
Click to expand...
Click to collapse
This works flawlessly in Realme C11.
HemanthJabalpuri said:
This works flawlessly in Realme C11.
Click to expand...
Click to collapse
recently? i am hearing in other threads that it was a recent change that made it stop working? only a few days ago.
Sage said:
recently? i am hearing in other threads that it was a recent change that made it stop working? only a few days ago.
Click to expand...
Click to collapse
Yes, see above post. https://forum.xda-developers.com/t/...ow-bootloader-unlocking.4136341/post-84091819
Got it working. Have NO MAC address listed in the Loopback and have at least 1 other network device active with internet access!
i thought you were supposed to have no internet adapter.
Also working on Realme 7 Pro, quick question, I'm already rooted with custom recovery, am I allowed to change the region without removing root and custom recovery?
Hello @Zacharee1
THANK YOU VERY MUCH!!
I was struggling to unlock the bootloader on a realme 5 with Android 10 and you SAVED MY ASS!!
Guide is working!!
Does not work on realme 7 RMX2155 : ( . In depth Test app Failed to submit application is displayed
works on a realme 7 pro, thanks.
dynux90 said:
Hello @Zacharee1
THANK YOU VERY MUCH!!
I was struggling to unlock the bootloader on a realme 5 with Android 10 and you SAVED MY ASS!!
Guide is working!!
Click to expand...
Click to collapse
how did you get it to work,,cause when i click on start unlocking my laptop screen just flashes,,but nothing happens on the sides of the secrecy autounlocker ,,a few trials here and there i was able to acquire a token from the software but when i input in my AuthTokenDecrypt it says signature doesn't match
Hye
Is This Still Working For realme 3 pro?