Can not wake up from sleep mode. - Remix OS for PC

Hi, remix OS is very good. Certainly will compete windows. Without major problems I had started to offer on a laptop computer, video, Google Play, microsoft bluetooth mouse comfort, brightness control and sound, gmail, youtube. I am very happy. I just need advice on how to correct the deficiency. Can not wake up from sleep mode.
Remix OS 2
notebook HP 250 G2
number product FOY78EA BCM

---

segin0 said:
Hi, remix OS is very good. Certainly will compete windows. Without major problems I had started to offer on a laptop computer, video, Google Play, microsoft bluetooth mouse comfort, brightness control and sound, gmail, youtube. I am very happy. I just need advice on how to correct the deficiency. Can not wake up from sleep mode.
Remix OS 2
notebook HP 250 G2
number product FOY78EA BCM
Click to expand...
Click to collapse
Sleep mode does not work properly. Dont let it go to sleep.

---

I'm currently on 2.0.205. Running 32-bit Version Remix OS directly from SSD, on Asus 1015PEM. I also face the problem of waking up the netbook from sleep with keyboard, trackpad and mouse.
Finally managed to wake it up by physically closing the lid of my netbook and reopening. Hope it helps someone.

---

segin0 said:
Hi, remix OS is very good. Certainly will compete windows. Without major problems I had started to offer on a laptop computer, video, Google Play, microsoft bluetooth mouse comfort, brightness control and sound, gmail, youtube. I am very happy. I just need advice on how to correct the deficiency. Can not wake up from sleep mode.
Remix OS 2
notebook HP 250 G2
number product FOY78EA BCM
Click to expand...
Click to collapse
If you prefre,you can go to Settings>Display>Sleep and set it to 'never'. And If you want to wake up from sleep,just DON'T TOUCH mouse,keypad or touchpad.. press the Power Button on the laptop and repress it after about a second. Hope that helps

---

I can make it wake up from sleep with power button but after waking up, it does not give any form of responds to input devices.
Any idea? Going to set Sleep mode to Never, just exploring how to solve this.

---

I wake up my device by pressing spacebar then alt-f1 then alt-f7 then power, hope it works for you

---

ethank82 said:
I can make it wake up from sleep with power button but after waking up, it does not give any form of responds to input devices.
Any idea? Going to set Sleep mode to Never, just exploring how to solve this.
Click to expand...
Click to collapse
Try pressing the power button twice(After waiting about 2 seconds),it works for me that way.

---

A temporary fix to bring wifi back after computer sleeps
TheBasterd said:
Sleep mode does not work properly. Dont let it go to sleep.
Click to expand...
Click to collapse
I found a solution for this problem by rooting my RemixOS then do the following steps
1) Root
2) Download rootbrowser
3) Open rootbrowser and goto /system/etc
4) Edit init.sh
5) Create a new function called init() like below
init()
{
rmmod bcma
rmmod wl
rmmod b43
rmmod ssb
modprobe -r sta ssb wl
modprobe wl
dhcpcd wlan0
}
6) Now go down the line do_init()
7) enter init as one of a new line at the bottom of that function
8) Now every time your computer goes sleep, just open rootbrowser, goto /system/etc/ and execute init.sh
9) Click on the WIFI icon and it should refresh and reconnect again
I'm looking to add the script in the automatic wake after sleep so I'll be updating once I find out the good place for it in RemixOS
Love RemixOS but it's still a bit buggy as hell to use.

---

elaborate a little
hitandrun972 said:
I found a solution for this problem by rooting my RemixOS then do the following steps
1) Root
2) Download rootbrowser
3) Open rootbrowser and goto /system/etc
4) Edit init.sh
5) Create a new function called init() like below
init()
{
rmmod bcma
rmmod wl
rmmod b43
rmmod ssb
modprobe -r sta ssb wl
modprobe wl
dhcpcd wlan0
}
6) Now go down the line do_init()
7) enter init as one of a new line at the bottom of that function
8) Now every time your computer goes sleep, just open rootbrowser, goto /system/etc/ and execute init.sh
9) Click on the WIFI icon and it should refresh and reconnect again
I'm looking to add the script in the automatic wake after sleep so I'll be updating once I find out the good place for it in RemixOS
Love RemixOS but it's still a bit buggy as hell to use.
Click to expand...
Click to collapse
i dont understand the instructions plus mine looks different ........ #
# Copyright (C) 2013-2015 The Android-x86 Open Source Project
#
# License: GNU Public License v2 or later
#
function set_property()
{
setprop "$1" "$2"
[ -n "$DEBUG" ] && echo "$1"="$2" >> /dev/x86.prop
}
function init_misc()
{
# device information
setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
setprop ro.product.model "$PRODUCT"
# a hack for USB modem
lsusb | grep 1a8d:1000 && eject
# in case no cpu governor driver autoloads
[ -d /sys/devices/system/cpu/cpu0/cpufreq ] || modprobe acpi-cpufreq
}
function init_hal_audio()
{
case "$PRODUCT" in
VirtualBox*|Bochs*)
[ -d /proc/asound/card0 ] || modprobe snd-sb16 isapnp=0 irq=5
;;
*)
;;
esac
if [ "`cat /proc/asound/card0/id`" = "IntelHDMI" ]; then
[ -d /proc/asound/card1 ] || set_property ro.hardware.audio.primary hdmi
fi
}
function init_hal_bluetooth()
{
for r in /sys/class/rfkill/*; do
type=$(cat $r/type)
[ "$type" = "wlan" -o "$type" = "bluetooth" ] && echo 1 > $r/state
done
case "$PRODUCT" in
T10*TA|HP*Omni*)
BTUART_PORT=/dev/ttyS1
;;
MacBookPro8*)
rmmod b43
modprobe b43 btcoex=0
modprobe btusb
;;
# FIXME
# Fix MacBook 2013-2015 (Air6/7&Pro11/12) BCM4360 ssb&wl conflict.
MacBookPro11* | MacBookPro12* | MacBookAir6* | MacBookAir7*)
rmmod b43
rmmod ssb
rmmod bcma
rmmod wl
modprobe wl
modprobe btusb
;;
*)
for bt in $(lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
chown 1002.1002 $bt && chmod 660 $bt
done
modprobe btusb
;;
esac
if [ -n "$BTUART_PORT" ]; then
set_property hal.bluetooth.uart $BTUART_PORT
chown bluetooth.bluetooth $BTUART_PORT
start btattach:-B$BTUART_PORT
log -t hciconfig -p i "`hciconfig`"
fi
}
function init_hal_camera()
{
return
}
function init_hal_gps()
{
# TODO
return
}
function set_drm_mode()
{
case "$PRODUCT" in
ET1602*)
drm_mode=1366x768
;;
*)
;;
esac
[ -n "$drm_mode" ] && set_property debug.drm.mode.force $drm_mode
}
function init_uvesafb()
{
case "$PRODUCT" in
ET2002*)
UVESA_MODE=${UVESA_MODE:-1600x900}
;;
*)
;;
esac
[ "$HWACCEL" = "0" ] && bpp=16 || bpp=32
modprobe uvesafb mode_option=${UVESA_MODE:-1024x768}-$bpp ${UVESA_OPTION:-mtrr=3 scroll=redraw}
}
function init_hal_gralloc()
{
case "$(cat /proc/fb | head -1)" in
*virtiodrmfb)
# set_property ro.hardware.hwcomposer drm
;&
0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb)
set_property ro.hardware.gralloc drm
set_drm_mode
;;
"")
init_uvesafb
;&
0*)
;;
esac
[ -n "$DEBUG" ] && set_property debug.egl.trace error
}
function init_hal_hwcomposer()
{
# TODO
return
}
function init_hal_lights()
{
chown 1000.1000 /sys/class/backlight/*/brightness
}
function init_hal_power()
{
for p in /sys/class/rtc/*; do
echo disabled > $p/device/power/wakeup
done
# TODO
case "$PRODUCT" in
*)
;;
esac
}
function init_hal_sensors()
{
# if we have sensor module for our hardware, use it
ro_hardware=$(getprop ro.hardware)
[ -f /system/lib/hw/sensors.${ro_hardware}.so ] && return 0
local hal_sensors=kbd
case "$(cat $DMIPATH/uevent)" in
*Lucid-MWE*)
set_property ro.ignore_atkbd 1
hal_sensors=hdaps
;;
*ICONIA*W5*)
hal_sensors=w500
;;
*S10-3t*)
hal_sensors=s103t
;;
*Inagua*)
#setkeycodes 0x62 29
#setkeycodes 0x74 56
set_property ro.ignore_atkbd 1
set_property hal.sensors.kbd.type 2
;;
*TEGA*|*2010:svnIntel:*)
set_property ro.ignore_atkbd 1
set_property hal.sensors.kbd.type 1
io_switch 0x0 0x1
setkeycodes 0x6d 125
;;
*DLI*)
set_property ro.ignore_atkbd 1
set_property hal.sensors.kbd.type 1
setkeycodes 0x64 1
setkeycodes 0x65 172
setkeycodes 0x66 120
setkeycodes 0x67 116
setkeycodes 0x68 114
setkeycodes 0x69 115
setkeycodes 0x6c 114
setkeycodes 0x6d 115
;;
*tx2*)
setkeycodes 0xb1 138
setkeycodes 0x8a 152
set_property hal.sensors.kbd.type 6
set_property poweroff.doubleclick 0
set_property qemu.hw.mainkeys 1
;;
*MS-N0E1*)
set_property ro.ignore_atkbd 1
set_property poweroff.doubleclick 0
setkeycodes 0xa5 125
setkeycodes 0xa7 1
setkeycodes 0xe3 142
;;
*Aspire1*25*)
modprobe lis3lv02d_i2c
echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
;;
*ThinkPad*Tablet*)
modprobe hdaps
hal_sensors=hdaps
;;
*i7Stylus*)
set_property hal.sensors.iio.accel.matrix 1,0,0,0,-1,0,0,0,-1
;;
*ST70416-6*)
set_property hal.sensors.iio.accel.matrix 0,-1,0,-1,0,0,0,0,-1
;;
*ONDATablet*)
set_property hal.sensors.iio.accel.matrix 0,1,0,1,0,0,0,0,-1
;;
*)
;;
esac
# has iio sensor-hub?
if [ -n "`ls /sys/bus/iio/devices/iio:device* 2> /dev/null`" ]; then
busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device*/
lsmod | grep -q hid_sensor_accel_3d && hal_sensors=hsb || hal_sensors=iio
elif lsmod | grep -q lis3lv02d_i2c; then
hal_sensors=hdaps
fi
set_property ro.hardware.sensors $hal_sensors
}
function create_pointercal()
{
if [ ! -e /data/misc/tscal/pointercal ]; then
mkdir -p /data/misc/tscal
touch /data/misc/tscal/pointercal
chown 1000.1000 /data/misc/tscal /data/misc/tscal/*
chmod 775 /data/misc/tscal
chmod 664 /data/misc/tscal/pointercal
fi
}
function init_tscal()
{
case "$PRODUCT" in
ST70416-6*)
modprobe gslx680_ts_acpi
;&
T91|T101|ET2002|74499FU|945GSE-ITE8712|CF-19[CDYFGKLP]*)
create_pointercal
return
;;
*)
;;
esac
for usbts in $(lsusb | awk '{ print $6 }'); do
case "$usbts" in
0596:0001|0eef:0001)
create_pointercal
return
;;
*)
;;
esac
done
}
function init_ril()
{
case "$(cat $DMIPATH/uevent)" in
*TEGA*|*2010:svnIntel:*|*Lucid-MWE*)
set_property rild.libpath /system/lib/libhuaweigeneric-ril.so
set_property rild.libargs "-d /dev/ttyUSB2 -v /dev/ttyUSB1"
set_property ro.radio.noril no
;;
*)
set_property ro.radio.noril yes
;;
esac
}
function init_cpu_governor()
{
governor=$(getprop cpu.governor)
[ $governor ] && {
for cpu in $(ls -d /sys/devices/system/cpu/cpu?); do
echo $governor > $cpu/cpufreq/scaling_governor || return 1
done
}
}
function do_init()
{
init_misc
init_hal_audio
init_hal_bluetooth
init_hal_camera
init_hal_gps
init_hal_gralloc
init_hal_hwcomposer
init_hal_lights
init_hal_power
init_hal_sensors
init_tscal
init_ril
post_init
}
function do_netconsole()
{
modprobe netconsole netconsole="@/,@$(getprop dhcp.eth0.gateway)/"
}
function do_bootcomplete()
{
init_cpu_governor
[ -z "$(getprop persist.sys.root_access)" ] && setprop persist.sys.root_access 3
# FIXME: autosleep works better on i965?
[ "$(getprop debug.mesa.driver)" = "i965" ] && setprop debug.autosleep 1
lsmod | grep -e brcmfmac && setprop wlan.no-unload-driver 1
case "$PRODUCT" in
1866???|1867???|1869???) # ThinkPad X41 Tablet
start tablet-mode
start wacom-input
setkeycodes 0x6d 115
setkeycodes 0x6e 114
setkeycodes 0x69 28
setkeycodes 0x6b 158
setkeycodes 0x68 172
setkeycodes 0x6c 127
setkeycodes 0x67 217
;;
6363???|6364???|6366???) # ThinkPad X60 Tablet
;&
7762???|7763???|7767???) # ThinkPad X61 Tablet
start tablet-mode
start wacom-input
setkeycodes 0x6d 115
setkeycodes 0x6e 114
setkeycodes 0x69 28
setkeycodes 0x6b 158
setkeycodes 0x68 172
setkeycodes 0x6c 127
setkeycodes 0x67 217
;;
7448???|7449???|7450???|7453???) # ThinkPad X200 Tablet
start tablet-mode
start wacom-input
setkeycodes 0xe012 158
setkeycodes 0x66 172
setkeycodes 0x6b 127
;;
*)
;;
esac
# [ -d /proc/asound/card0 ] || modprobe snd-dummy
for c in $(grep '\[.*\]' /proc/asound/cards | awk '{print $1}'); do
f=/system/etc/alsa/$(cat /proc/asound/card$c/id).state
if [ -e $f ]; then
alsa_ctl -f $f restore $c
else
alsa_ctl init $c
alsa_amixer -c $c set Master on
alsa_amixer -c $c set Master 100%
alsa_amixer -c $c set Headphone on
alsa_amixer -c $c set Headphone 100%
alsa_amixer -c $c set Speaker 100%
alsa_amixer -c $c set Capture 100%
alsa_amixer -c $c set Capture cap
alsa_amixer -c $c set PCM 100 unmute
alsa_amixer -c $c set SPO unmute
alsa_amixer -c $c set 'Mic Boost' 3
alsa_amixer -c $c set 'Internal Mic Boost' 3
fi
done
}
function do_hci()
{
local hci=`hciconfig | grep ^hci | cut -d: -f1`
local btd="`getprop init.svc.bluetoothd`"
log -t bluetoothd -p i "$btd ($hci)"
if [ -n "`getprop hal.bluetooth.uart`" ]; then
[ "`getprop init.svc.bluetoothd`" = "running" ] && hciconfig $hci up
fi
}
PATH=/sbin:/system/bin:/system/xbin
DMIPATH=/sys/class/dmi/id
BOARD=$(cat $DMIPATH/board_name)
PRODUCT=$(cat $DMIPATH/product_name)
# import cmdline variables
for c in `cat /proc/cmdline`; do
case $c in
BOOT_IMAGE=*|iso-scan/*|*.*=*)
;;
*=*)
eval $c
if [ -z "$1" ]; then
case $c in
HWACCEL=*)
set_property debug.egl.hw $HWACCEL
;;
DEBUG=*)
[ -n "$DEBUG" ] && set_property debug.logcat 1
;;
esac
fi
;;
esac
done
[ -n "$DEBUG" ] && set -x || exec &> /dev/null
# import the vendor specific script
hw_sh=/vendor/etc/init.sh
[ -e $hw_sh ] && source $hw_sh
case "$1" in
netconsole)
[ -n "$DEBUG" ] && do_netconsole
;;
bootcomplete)
do_bootcomplete
;;
hci)
do_hci
;;
init|"")
do_init
;;
esac
---------- Post added at 07:12 PM ---------- Previous post was at 07:07 PM ----------
joeylikesubuntu said:
i dont understand the instructions plus mine looks different ........ #
# Copyright (C) 2013-2015 The Android-x86 Open Source Project
#
# License: GNU Public License v2 or later
#
function set_property()
{
setprop "$1" "$2"
[ -n "$DEBUG" ] && echo "$1"="$2" >> /dev/x86.prop
}
function init_misc()
{
# device information
setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
setprop ro.product.model "$PRODUCT"
# a hack for USB modem
lsusb | grep 1a8d:1000 && eject
# in case no cpu governor driver autoloads
[ -d /sys/devices/system/cpu/cpu0/cpufreq ] || modprobe acpi-cpufreq
}
function init_hal_audio()
{
case "$PRODUCT" in
VirtualBox*|Bochs*)
[ -d /proc/asound/card0 ] || modprobe snd-sb16 isapnp=0 irq=5
;;
*)
;;
esac
if [ "`cat /proc/asound/card0/id`" = "IntelHDMI" ]; then
[ -d /proc/asound/card1 ] || set_property ro.hardware.audio.primary hdmi
fi
}
function init_hal_bluetooth()
{
for r in /sys/class/rfkill/*; do
type=$(cat $r/type)
[ "$type" = "wlan" -o "$type" = "bluetooth" ] && echo 1 > $r/state
done
case "$PRODUCT" in
T10*TA|HP*Omni*)
BTUART_PORT=/dev/ttyS1
;;
MacBookPro8*)
rmmod b43
modprobe b43 btcoex=0
modprobe btusb
;;
# FIXME
# Fix MacBook 2013-2015 (Air6/7&Pro11/12) BCM4360 ssb&wl conflict.
MacBookPro11* | MacBookPro12* | MacBookAir6* | MacBookAir7*)
rmmod b43
rmmod ssb
rmmod bcma
rmmod wl
modprobe wl
modprobe btusb
;;
*)
for bt in $(lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
chown 1002.1002 $bt && chmod 660 $bt
done
modprobe btusb
;;
esac
if [ -n "$BTUART_PORT" ]; then
set_property hal.bluetooth.uart $BTUART_PORT
chown bluetooth.bluetooth $BTUART_PORT
start btattach:-B$BTUART_PORT
log -t hciconfig -p i "`hciconfig`"
fi
}
function init_hal_camera()
{
return
}
function init_hal_gps()
{
# TODO
return
}
function set_drm_mode()
{
case "$PRODUCT" in
ET1602*)
drm_mode=1366x768
;;
*)
;;
esac
[ -n "$drm_mode" ] && set_property debug.drm.mode.force $drm_mode
}
function init_uvesafb()
{
case "$PRODUCT" in
ET2002*)
UVESA_MODE=${UVESA_MODE:-1600x900}
;;
*)
;;
esac
[ "$HWACCEL" = "0" ] && bpp=16 || bpp=32
modprobe uvesafb mode_option=${UVESA_MODE:-1024x768}-$bpp ${UVESA_OPTION:-mtrr=3 scroll=redraw}
}
function init_hal_gralloc()
{
case "$(cat /proc/fb | head -1)" in
*virtiodrmfb)
# set_property ro.hardware.hwcomposer drm
;&
0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb)
set_property ro.hardware.gralloc drm
set_drm_mode
;;
"")
init_uvesafb
;&
0*)
;;
esac
[ -n "$DEBUG" ] && set_property debug.egl.trace error
}
function init_hal_hwcomposer()
{
# TODO
return
}
function init_hal_lights()
{
chown 1000.1000 /sys/class/backlight/*/brightness
}
function init_hal_power()
{
for p in /sys/class/rtc/*; do
echo disabled > $p/device/power/wakeup
done
# TODO
case "$PRODUCT" in
*)
;;
esac
}
function init_hal_sensors()
{
# if we have sensor module for our hardware, use it
ro_hardware=$(getprop ro.hardware)
[ -f /system/lib/hw/sensors.${ro_hardware}.so ] && return 0
local hal_sensors=kbd
case "$(cat $DMIPATH/uevent)" in
*Lucid-MWE*)
set_property ro.ignore_atkbd 1
hal_sensors=hdaps
;;
*ICONIA*W5*)
hal_sensors=w500
;;
*S10-3t*)
hal_sensors=s103t
;;
*Inagua*)
#setkeycodes 0x62 29
#setkeycodes 0x74 56
set_property ro.ignore_atkbd 1
set_property hal.sensors.kbd.type 2
;;
*TEGA*|*2010:svnIntel:*)
set_property ro.ignore_atkbd 1
set_property hal.sensors.kbd.type 1
io_switch 0x0 0x1
setkeycodes 0x6d 125
;;
*DLI*)
set_property ro.ignore_atkbd 1
set_property hal.sensors.kbd.type 1
setkeycodes 0x64 1
setkeycodes 0x65 172
setkeycodes 0x66 120
setkeycodes 0x67 116
setkeycodes 0x68 114
setkeycodes 0x69 115
setkeycodes 0x6c 114
setkeycodes 0x6d 115
;;
*tx2*)
setkeycodes 0xb1 138
setkeycodes 0x8a 152
set_property hal.sensors.kbd.type 6
set_property poweroff.doubleclick 0
set_property qemu.hw.mainkeys 1
;;
*MS-N0E1*)
set_property ro.ignore_atkbd 1
set_property poweroff.doubleclick 0
setkeycodes 0xa5 125
setkeycodes 0xa7 1
setkeycodes 0xe3 142
;;
*Aspire1*25*)
modprobe lis3lv02d_i2c
echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
;;
*ThinkPad*Tablet*)
modprobe hdaps
hal_sensors=hdaps
;;
*i7Stylus*)
set_property hal.sensors.iio.accel.matrix 1,0,0,0,-1,0,0,0,-1
;;
*ST70416-6*)
set_property hal.sensors.iio.accel.matrix 0,-1,0,-1,0,0,0,0,-1
;;
*ONDATablet*)
set_property hal.sensors.iio.accel.matrix 0,1,0,1,0,0,0,0,-1
;;
*)
;;
esac
# has iio sensor-hub?
if [ -n "`ls /sys/bus/iio/devices/iio:device* 2> /dev/null`" ]; then
busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device*/
lsmod | grep -q hid_sensor_accel_3d && hal_sensors=hsb || hal_sensors=iio
elif lsmod | grep -q lis3lv02d_i2c; then
hal_sensors=hdaps
fi
set_property ro.hardware.sensors $hal_sensors
}
function create_pointercal()
{
if [ ! -e /data/misc/tscal/pointercal ]; then
mkdir -p /data/misc/tscal
touch /data/misc/tscal/pointercal
chown 1000.1000 /data/misc/tscal /data/misc/tscal/*
chmod 775 /data/misc/tscal
chmod 664 /data/misc/tscal/pointercal
fi
}
function init_tscal()
{
case "$PRODUCT" in
ST70416-6*)
modprobe gslx680_ts_acpi
;&
T91|T101|ET2002|74499FU|945GSE-ITE8712|CF-19[CDYFGKLP]*)
create_pointercal
return
;;
*)
;;
esac
for usbts in $(lsusb | awk '{ print $6 }'); do
case "$usbts" in
0596:0001|0eef:0001)
create_pointercal
return
;;
*)
;;
esac
done
}
function init_ril()
{
case "$(cat $DMIPATH/uevent)" in
*TEGA*|*2010:svnIntel:*|*Lucid-MWE*)
set_property rild.libpath /system/lib/libhuaweigeneric-ril.so
set_property rild.libargs "-d /dev/ttyUSB2 -v /dev/ttyUSB1"
set_property ro.radio.noril no
;;
*)
set_property ro.radio.noril yes
;;
esac
}
function init_cpu_governor()
{
governor=$(getprop cpu.governor)
[ $governor ] && {
for cpu in $(ls -d /sys/devices/system/cpu/cpu?); do
echo $governor > $cpu/cpufreq/scaling_governor || return 1
done
}
}
function do_init()
{
init_misc
init_hal_audio
init_hal_bluetooth
init_hal_camera
init_hal_gps
init_hal_gralloc
init_hal_hwcomposer
init_hal_lights
init_hal_power
init_hal_sensors
init_tscal
init_ril
post_init
}
function do_netconsole()
{
modprobe netconsole netconsole="@/,@$(getprop dhcp.eth0.gateway)/"
}
function do_bootcomplete()
{
init_cpu_governor
[ -z "$(getprop persist.sys.root_access)" ] && setprop persist.sys.root_access 3
# FIXME: autosleep works better on i965?
[ "$(getprop debug.mesa.driver)" = "i965" ] && setprop debug.autosleep 1
lsmod | grep -e brcmfmac && setprop wlan.no-unload-driver 1
case "$PRODUCT" in
1866???|1867???|1869???) # ThinkPad X41 Tablet
start tablet-mode
start wacom-input
setkeycodes 0x6d 115
setkeycodes 0x6e 114
setkeycodes 0x69 28
setkeycodes 0x6b 158
setkeycodes 0x68 172
setkeycodes 0x6c 127
setkeycodes 0x67 217
;;
6363???|6364???|6366???) # ThinkPad X60 Tablet
;&
7762???|7763???|7767???) # ThinkPad X61 Tablet
start tablet-mode
start wacom-input
setkeycodes 0x6d 115
setkeycodes 0x6e 114
setkeycodes 0x69 28
setkeycodes 0x6b 158
setkeycodes 0x68 172
setkeycodes 0x6c 127
setkeycodes 0x67 217
;;
7448???|7449???|7450???|7453???) # ThinkPad X200 Tablet
start tablet-mode
start wacom-input
setkeycodes 0xe012 158
setkeycodes 0x66 172
setkeycodes 0x6b 127
;;
*)
;;
esac
# [ -d /proc/asound/card0 ] || modprobe snd-dummy
for c in $(grep '\[.*\]' /proc/asound/cards | awk '{print $1}'); do
f=/system/etc/alsa/$(cat /proc/asound/card$c/id).state
if [ -e $f ]; then
alsa_ctl -f $f restore $c
else
alsa_ctl init $c
alsa_amixer -c $c set Master on
alsa_amixer -c $c set Master 100%
alsa_amixer -c $c set Headphone on
alsa_amixer -c $c set Headphone 100%
alsa_amixer -c $c set Speaker 100%
alsa_amixer -c $c set Capture 100%
alsa_amixer -c $c set Capture cap
alsa_amixer -c $c set PCM 100 unmute
alsa_amixer -c $c set SPO unmute
alsa_amixer -c $c set 'Mic Boost' 3
alsa_amixer -c $c set 'Internal Mic Boost' 3
fi
done
}
function do_hci()
{
local hci=`hciconfig | grep ^hci | cut -d: -f1`
local btd="`getprop init.svc.bluetoothd`"
log -t bluetoothd -p i "$btd ($hci)"
if [ -n "`getprop hal.bluetooth.uart`" ]; then
[ "`getprop init.svc.bluetoothd`" = "running" ] && hciconfig $hci up
fi
}
PATH=/sbin:/system/bin:/system/xbin
DMIPATH=/sys/class/dmi/id
BOARD=$(cat $DMIPATH/board_name)
PRODUCT=$(cat $DMIPATH/product_name)
# import cmdline variables
for c in `cat /proc/cmdline`; do
case $c in
BOOT_IMAGE=*|iso-scan/*|*.*=*)
;;
*=*)
eval $c
if [ -z "$1" ]; then
case $c in
HWACCEL=*)
set_property debug.egl.hw $HWACCEL
;;
DEBUG=*)
[ -n "$DEBUG" ] && set_property debug.logcat 1
;;
esac
fi
;;
esac
done
[ -n "$DEBUG" ] && set -x || exec &> /dev/null
# import the vendor specific script
hw_sh=/vendor/etc/init.sh
[ -e $hw_sh ] && source $hw_sh
case "$1" in
netconsole)
[ -n "$DEBUG" ] && do_netconsole
;;
bootcomplete)
do_bootcomplete
;;
hci)
do_hci
;;
init|"")
do_init
;;
esac
Click to expand...
Click to collapse
im running remix os on a root folder of ubuntu 17.10 using grub customizer

---

dell inspiron 1545
gjiehs said:
I'm currently on 2.0.205. Running 32-bit Version Remix OS directly from SSD, on Asus 1015PEM. I also face the problem of waking up the netbook from sleep with keyboard, trackpad and mouse.
Finally managed to wake it up by physically closing the lid of my netbook and reopening. Hope it helps someone.
Click to expand...
Click to collapse
this is exactly my problem! when i close the lid remix OS goes to sleep, when i open the lid its still in the sleep mode. i can see the lid light in the screen but no remix OS ! tried the power button but no luck !