Hello guys, after lot of trouble i've managed to dual boot latest version of remix os (25/01/2016) on my Lenovo miix 2 10, everything works great,no lag no crashes,google play working ...but audio isnt working nor from speakers nor from audio jack, i can slide up and down the volume slider but still no sound ,,any idea? is this a known bug?
scialbaa said:
Hello guys, after lot of trouble i've managed to dual boot latest version of remix os (25/01/2016) on my Lenovo miix 2 10, everything works great,no lag no crashes,google play working ...but audio isnt working nor from speakers nor from audio jack, i can slide up and down the volume slider but still no sound ,,any idea? is this a known bug?
Click to expand...
Click to collapse
Your hardware must not be supported.
Your hardware must not be supported.
Click to expand...
Click to collapse
either that or you could try wiggling a jack in the socket
ecksdeeay said:
either that or you could try wiggling a jack in the socket
Click to expand...
Click to collapse
Hello,
Same issue with my Miix 2 10.
No matter the Android x86 distro I use (Remix OS, Phoenix OS, "stock" Android, etc) I have no sound...
If someone could help us. Maybe an update of the kernel will fix this issue... :good:
kaderbakkas said:
Hello,
Same issue with my Miix 2 10.
No matter the Android x86 distro I use (Remix OS, Phoenix OS, "stock" Android, etc) I have no sound...
If someone could help us. Maybe an update of the kernel will fix this issue... :good:
Click to expand...
Click to collapse
Hello ,glad to find someone else with this laptop i went around on lenovo websites to search eventual firmware or drivers but no luck.. thx you all for answer anyway
hey how did you get to install Lenovo miix 2 10? i tried mine it just gives a black screen with a mouse cursor.
apersaud500 said:
hey how did you get to install Lenovo miix 2 10? i tried mine it just gives a black screen with a mouse cursor.
Click to expand...
Click to collapse
Try this tuto, it worked for me :
reddit.com/r/RemixOS/comments/409w1o/remixos_efi_install_assumes_you_already_have/
kaderbakkas said:
Try this tuto, it worked for me :
reddit.com/r/RemixOS/comments/409w1o/remixos_efi_install_assumes_you_already_have/
Click to expand...
Click to collapse
The installer used in the guide you linked now supports Remix OS. Do you think installing x86 and then replacing files with Remix ones are still required in this case?
https://www.reddit.com/r/RemixOS/comments/409w1o/remixos_efi_install_assumes_you_already_have/
Link to installer.
http://forum.xda-developers.com/android/software/winapp-android-x86-installer-uefi-t3222483
adfurgerson said:
The installer used in the guide you linked now supports Remix OS. Do you think installing x86 and then replacing files with Remix ones are still required in this case?
https://www.reddit.com/r/RemixOS/comments/409w1o/remixos_efi_install_assumes_you_already_have/
Link to installer.
http://forum.xda-developers.com/android/software/winapp-android-x86-installer-uefi-t3222483
Click to expand...
Click to collapse
In my case, I tried to install Remix OS with the Android Installer by it did not work. So....
I get no audio with phoenix but audio with remix.
The only thing that changed in my hardware is with remix 2.0 I used a Radeon r2 card with hdmi- this setup had good audio.
Running phoenix, I had taken out the dedicated gpu so I assume phoenix didn't like my onboard i3 2120 hdmi audio?
I REALLY want phoenix to work because it boots much faster and it's overall pepper in my opinion..
Fyi I'm using a Dell optiplex 390 i3 4gb ram.
$70 on eBay with gpu whole system. ! They have plenty...
even mine
I use remix on my surface pro and no sound
I don't know what to do please help
Actually it is really nic running remix on surface due to the touch screen:good::good:
No sound on the Asus UX305. It uses Realtek and this seems to be an issue with this version of the OS. Hopefully they address it soon!
No sound on Asus transformerbook T100ta, but have sound in windows 10 an 8 (with a driver suplied by Asus), and in Ubuntu (with a simple config file). I'm triyng replace some system directory files and see what happens...
I have no sound on hp pavilion x2 detachable 2 with intel cherry trail... someone managed to get it working?
DELETE
I have the same problem my device is hp pavalion x2 also when the device is on the standby mode(sleep mode) I can not run it again using touch screen only using keyboard
Ok. I've got remix O's running on a custom build PC with and r7 250 GPU and get no sound through the HDMI port however when I run aplay through the root terminal it detects the card as a valid sound card. Any ideas? My motherboard supports audio as well through a standard audio jack but I have not tried this option as I don't have a set of speakers to use arm.
no audio through audio jack on my asus notebook.but external speakers works
Found this in another forum, something to try:
It seems that alsa does not select the current sound card as default. That
can be changed during runtime by running the following command in busybox
(fit Alt+F1 to switch console):
alsa_ctl init 1
This command actually initializes the second sound card found in the set.
You can list all your detected sound cards using:
alsa_aplay -l
To change it permanently you have to make a few changes in
/system/usr/share/alsa/alsa.conf.
For more information about this consult this guide:
https://wiki.archlinux.org/index.php/Advanced_Linux_Sound_Architecture
(mind that to make changes permanently you have to install Android-x86 to
your hardrive as the live-usb version is read-only)
Click to expand...
Click to collapse
Nope.. still nothing.. weird thing is my USB headset works??????
Related
Hi there. Is there any chanse to boot Remix Os on this kind of tablets? Everything goes only to "detecting android" then stuck with black screen. Why ?
Hi, this is because on those tablets there's mostly Android on it, which means Remix OS' boot loader is not able to correctly detect those preinstalled partitions. If this is a dual boot tablet (Android + Windows), try starting up Windows first, then shutdown, then try starting RemixOS again.
baytrail
I know on my baytrail tablet, which came with windows on, to boot ubuntu I have to edit the grub.cfg to get it to boot. And even then it just shows a black screen for a very long time before getting to the UI.
While android is not ubuntu they do have a lot in common. I could dig out the grub.cfg if that helps.
I am running Remix OS on my Winbook TW-801 now and it works great.
Got this running on my NEC Lavie tw-708...works smooth and stable..but driver problems are present..
No Bluetooth
No rotation
No GPS
No audio
No brightness controls
No battery gauge
WiFi works
Video playback is smooth
The chipset of the device Intel atom 3735F..its a bay trail chipset with a 32bit uefi..
So strange that mine Acer W4-820 stucks on black screen after Detecting. WTF?
Means I am lucky that my tablet manufacturer officially released Remix OS.
zayeshk said:
Got this running on my NEC Lavie tw-708...works smooth and stable..but driver problems are present..
No Bluetooth
No rotation
No GPS
No audio
No brightness controls
No battery gauge
WiFi works
Video playback is smooth
The chipset of the device Intel atom 3735F..its a bay trail chipset with a 32bit uefi..
Click to expand...
Click to collapse
The above does not work on my TW-801 either but I do have audio (it kind of sounds crackely though - when I route the video and audio via hdmi out -only the video works). Other than those things it works good. I was surprised that the touch screen works for me when running Remix OS. Now I want to try and make a NTFS sd and expand the data.img file so I can have more space. Anybody able to get it running on a NTFS sd and expand the data.img file? For a $150 tablet this TW-801 was a great bargain. Now I can run Windows 10, Ubuntu via VMware virtual machine, and Android. The TW-801 has a SD slot that works with 128GB sdcard - so I might try to make a partition on it. For now I am running Remix OS using a 3.0 usb card reader with a 32GB sdcard. The TW-801 has a full size 3.0 usb slot. I can also run a 3.0 usb hub for multiple usb slots (usb keyboard/mouse). I think I can use Linux Deploy to install Linux to a separate sdcard using the usb hub because there are x86 distros.
---------- Post added at 11:01 AM ---------- Previous post was at 10:21 AM ----------
stillsmile said:
So strange that mine Acer W4-820 stucks on black screen after Detecting. WTF?
Click to expand...
Click to collapse
Make sure you have a fast sdcard - I used a slower one first and couldn't get it to boot.
rsktkr1 said:
The above does not work on my TW-801 either but I do have audio (it kind of sounds crackely though - when I route the video and audio via hdmi out -only the video works). Other than those things it works good. I was surprised that the touch screen works for me when running Remix OS. Now I want to try and make a NTFS sd and expand the data.img file so I can have more space. Anybody able to get it running on a NTFS sd and expand the data.img file? For a $150 tablet this TW-801 was a great bargain. Now I can run Windows 10, Ubuntu via VMware virtual machine, and Android. The TW-801 has a SD slot that works with 128GB sdcard - so I might try to make a partition on it. For now I am running Remix OS using a 3.0 usb card reader with a 32GB sdcard. The TW-801 has a full size 3.0 usb slot. I can also run a 3.0 usb hub for multiple usb slots (usb keyboard/mouse). I think I can use Linux Deploy to install Linux to a separate sdcard using the usb hub because there are x86 distros.
---------- Post added at 11:01 AM ---------- Previous post was at 10:21 AM ----------
Make sure you have a fast sdcard - I used a slower one first and couldn't get it to boot.
Click to expand...
Click to collapse
i boot from emmc (internal memory) . i can get to grab install menu qnd juar select the menu option ( install) then i get black screen
Winbook TW802
Hi
I see one person got it to work on a Winbook. No matter what I do I can't seem to get it to boot off the USB. I got into the BIOS and put all the USB options to the top, made sure secure boot was disabled. It just goes right to Windows. no matter what I try. I also tried Legacy and EFI versions. Same result on both.
Any suggestions would be greatly appreciated.
Thanks
Enio
make sure that you have the file bootia32.efi in /EFI/BOOT/ on you usb dongle.
I successfully boot on the key but it doesn't arrive on the desktop and stays stuck on a Black Screen. I have an Chuwi vi8 plus xz8300 bay trail processor.
jacquesdupontd said:
I successfully boot on the key but it doesn't arrive on the desktop and stays stuck on a Black Screen. I have an Chuwi vi8 plus xz8300 bay trail processor.
Click to expand...
Click to collapse
Take a look on linux boot params on grub. try to test another params. bootia32.efi should work on any bay trail as John Wells do it for Ubuntu.
*cheerio
audio and auto rotation
hp pavilion 10 x2 intel atom cherry trail 5x 8300z all working fine except ..
audio not working
auto rotation not working
.any other fix for this?
nashuatec said:
hp pavilion 10 x2 intel atom cherry trail 5x 8300z all working fine except ..
audio not working
auto rotation not working
.any other fix for this?
Click to expand...
Click to collapse
Same 2 in 1 tablet and same problem too...
Is anyone get audio working on x5-z8300 ?
zayeshk said:
Got this running on my NEC Lavie tw-708...works smooth and stable..but driver problems are present..
No Bluetooth
No rotation
No GPS
No audio
No brightness controls
No battery gauge
WiFi works
Video playback is smooth
The chipset of the device Intel atom 3735F..its a bay trail chipset with a 32bit uefi..
Click to expand...
Click to collapse
same problem here.
it was work when i use Remix os 2 i have installed 3 and doesn't work audio bluetooth brightness rotation gps
I'm going to mad.
I have installed remix os from usb to hdd. I have hp pavillion k8m11ea intel graphic card atom cpu and intel sound. i can boot remix os with DEBUG=0
any update about out device? HP PAvilion 10 x2 only audio not working this is the most important.
g0ne_wild said:
Hi, this is because on those tablets there's mostly Android on it, which means Remix OS' boot loader is not able to correctly detect those preinstalled partitions. If this is a dual boot tablet (Android + Windows), try starting up Windows first, then shutdown, then try starting RemixOS again.
Click to expand...
Click to collapse
Not true. Microsoft Surface (2, 3, 4) uses those chipsets, and doesn't come with Android on it. My Teclast tablet doesn't have Android on it. Neither do 2 other tablets I looked at.
RemixOS doesn't seem to boot properly on any of these.
Sent from my SM-G935P using XDA-Developers mobile app
---------- Post added at 10:18 PM ---------- Previous post was at 10:16 PM ----------
joesnose said:
I know on my baytrail tablet, which came with windows on, to boot ubuntu I have to edit the grub.cfg to get it to boot. And even then it just shows a black screen for a very long time before getting to the UI.
While android is not ubuntu they do have a lot in common. I could dig out the grub.cfg if that helps.
Click to expand...
Click to collapse
I would be VERY happy if you could dig up that GUB file and put it someplace where it could be downloaded.
Sent from my SM-G935P using XDA-Developers mobile app
For those who gets back screen after reboot, the solution from a linuxium's post might help. Sorry i was not able to paste an external link here. You can find the while post on google+ searching for linuxium or ian morrison.
---
Sometimes after installing your device only boots to a black screen. *Typically this happens when the NVRAM and ESP are out of sync. This can be easily fixed by performing the following:
1. Start with the device switched off.
2. Connect your LiveUSB.
3. Power on the device and press the relevant function key or key sequence to boot from the LiveUSB.
4. Open a terminal windows and enter:
type efibootmgr*
5. If the 'efibootmgr' is not installed enter:
sudo apt-get update && sudo apt-get install -y efibootmgr
6. Next remove any boot entries that may have been created through the earlier installs by entering:
* * * for BOOTENTRY in 0 1 2 3 4 5 6 7 8 9
* * * do
* * * * * sudo efibootmgr -b ${BOOTENTRY} -B
* * * done
7. Now create an Ubuntu boot entry by entering:
sudo efibootmgr -c -d /dev/mmcblk0 -p 1 -l \\EFI\\ubuntu\\grubx64.efi -L Ubuntu
8. Remove the LiveUSB and reboot from the newly created Ubuntu entry.
Note: If you have a dual boot installation then the ESP partition may be the second partition so modify the '-p 1' in the command above to '-p 2' or to whatever the ESP partition is. Likewise for some devices the eMMC is '/dev/mmcblk1' and not '/dev/mmcblk0' so again modify the command as appropriate. If your device uses a 32-bootloader then use 'bootia32.efi' rather than 'grubx64.efi' in the command. It also sometimes doesn't work first time and requires all the steps to be repeated which should then fix the issue
Hi hoping for some help.
I have an old Compaq v2000, low specs 1.5g ram, running windows 7 32bit and vista dual boot.
Trying to dual boot remix beta, have followed all the instructions a couple of times now, can get it to work fine on my desktop.
So I use the installation exe and install onto the hard drive and reboot, dual boot options come up and I click on remix os and it loads for the first time, read write speed as around 32mb/second ,slow but it should be enough. It goes through the first time install stage and then goes to boot into remix but is just a blank screen with a cursor at the top left corner, and just stays like that. Keys don't do anything. Any ideas?
reboot and press ESC key to go to main menu....press E
highlight the line that says kernel, press E.
go to the end of the line by pressing END key...press spacebar and type DEBUG=1
Press Enter......Press B to boot. Look at the verbose output on your screen and report at what point you get stuck.
btw....why on earth are you using windows vista??? XD
Ok thanks for replying.
I have done what you said comes up with this:
"[ 1.321221] failed to find cpu0 device node
+ exec
+ exec
...could not find a valid V7 on sda
could not find a valid V7 on sda1
could not find a valid V7 on sda2
couldnt mount as ext3 due to feature incompatibilities found at /dev/sda2"
then typed exit to continue boot and said "couldnt probe module"
Using vista as its faster that 7 on this old thing.
Ry
Rybena said:
then typed exit to continue boot and said "couldnt probe module"
Click to expand...
Click to collapse
Which one did u install...32bit or 64bit? Since your system is old, It might not support 64 bit.
And which graphics are you using....onboard or PCIe card?
Rybena said:
Using vista as its faster that 7 on this old thing.
Ry
Click to expand...
Click to collapse
I still use XP on my old laptop...way much better than Vista.
freelancer81 said:
Which one did u install...32bit or 64bit? Since your system is old, It might not support 64 bit.
And which graphics are you using....onboard or PCIe card?
I still use XP on my old laptop...way much better than Vista.
Click to expand...
Click to collapse
I installed the 32 bit version and im using inbuilt graphics.
I have had linux mint running on here and also other android x86 roms working.
hmmm...so it just stays at "couldn't probe module"??
i never got that error before....so dunno how to exactly deal with that.
maybe search/google will turn up something...
freelancer81 said:
hmmm...so it just stays at "couldn't probe module"??
i never got that error before....so dunno how to exactly deal with that.
maybe search/google will turn up something...
Click to expand...
Click to collapse
Have searched google and it seems to be a graphics problem, looks like its not supported at the moment, could be that Remix cannot locate the driver?
On a android x86 rom i installed on here the wifi had the same issue and that was managed to be fixed using a few commands that i found on google.
The VGA graphics adapter is RADEON Xpress 200G Series.
Hopefully it gets fixed in a later update.
Rybena said:
Have searched google and it seems to be a graphics problem, looks like its not supported at the moment, could be that Remix cannot locate the driver?
On a android x86 rom i installed on here the wifi had the same issue and that was managed to be fixed using a few commands that i found on google.
The VGA graphics adapter is RADEON Xpress 200G Series.
Hopefully it gets fixed in a later update.
Click to expand...
Click to collapse
Try booting with nomodeset vga=791 flag....
If it boots up, it means your gpu is not supported.
How do I connect to internet? I am using Remix through USB on Dell OptiPlex 780. My internet connects through a username and password which I have tried through the third option but did not work for me.
WiFi adapter not identifying by remix os
remix os is not recognising my WiFi adapter I tryed both Alfa and beta version but it is not recognised by bot of the versions. some one pls help me out of this problem.
freelancer81 said:
Try booting with nomodeset vga=791 flag....
If it boots up, it means your gpu is not supported.
Click to expand...
Click to collapse
Hey tried what you suggested and nothing.
I am able to go in and change the screen resolution but still only get a blank screen in DEBUG mode but still no actual display. Im guessing that its just not supported.
Video
I can see videos on the ROM but when i install Google Play Services, i can't see videos, any solution?
Hi there,
I have recently purchased the Windows Surface 3 and is attempting to load remix os alongside the existing windows os.
I have referred to numerous tutorials and suggestions to dual boot/load from usb. However, regardless of the method used, I am unable to select remix os during boot. The device boots straight to Windows 10 without allowing me the option to select the OS i would like to use. I already have secure boot disabled in UEFI and have attempted to install remix onto both ntfs and fat32 partitions, which did not yield any results thus far.
EDIT: I've solved the problem by disabling fast startup in windows. Hope this would help anyone who are facing the same problem.
How did you install that in your hard drive. Is there any partition that you have to make? What version oof the remix os have you installed on your Surface 3?
10507 said:
How did you install that in your hard drive. Is there any partition that you have to make? What version oof the remix os have you installed on your Surface 3?
Click to expand...
Click to collapse
Hey there,
You could create a partition. Howver, I actually skipped that and installed it directly into my C drive (your Win10 OS is not affected). These are the things I've done in sequence to get it up and running.
1. Turn off encryption via Settings>System>About
2. Turn off fast startup (google this, its first in the list)
3. Turn off secure boot in UEFI
4. Download and install 64bit Remix OS
I'm using the latest marshmallow version. However, the touch screen does not seem to be working for me, while the type cover and its touchpad works. Do let me know if u manage to get it working somehow!
Hope this helped you.
nicseng said:
Hey there,
You could create a partition. Howver, I actually skipped that and installed it directly into my C drive (your Win10 OS is not affected). These are the things I've done in sequence to get it up and running.
1. Turn off encryption via Settings>System>About
2. Turn off fast startup (google this, its first in the list)
3. Turn off secure boot in UEFI
4. Download and install 64bit Remix OS
I'm using the latest marshmallow version. However, the touch screen does not seem to be working for me, while the type cover and its touchpad works. Do let me know if u manage to get it working somehow!
Hope this helped you.
Click to expand...
Click to collapse
You have the surface 3 right? Not the surface 3 pro.
Thank you for the info and help
Hi, do you have sound when You use new Remix OS on Surface 3?
I have surface 3 too, and RemixOS 3 is working ok but there is no sound and no touch screen
nicseng said:
Hey there,
You could create a partition. Howver, I actually skipped that and installed it directly into my C drive (your Win10 OS is not affected). These are the things I've done in sequence to get it up and running.
1. Turn off encryption via Settings>System>About
2. Turn off fast startup (google this, its first in the list)
3. Turn off secure boot in UEFI
4. Download and install 64bit Remix OS
I'm using the latest marshmallow version. However, the touch screen does not seem to be working for me, while the type cover and its touchpad works. Do let me know if u manage to get it working somehow!
Hope this helped you.
Click to expand...
Click to collapse
terpio said:
Hi, do you have sound when You use new Remix OS on Surface 3?
I have surface 3 too, and RemixOS 3 is working ok but there is no sound and no touch screen
Click to expand...
Click to collapse
Sound and touchscreen not working for me either, while running as guest mode. I am unable to run resident mode.
10507 said:
You have the surface 3 right? Not the surface 3 pro.
Thank you for the info and help
Click to expand...
Click to collapse
yes the non-pro version. But I will be changing to surface pro 4 tommorow, although I heard there are similar problems on that as well.
nicseng said:
yes the non-pro version. But I will be changing to surface pro 4 tommorow, although I heard there are similar problems on that as well.
Click to expand...
Click to collapse
Please let us know when you've found a solution to the touchscreen and sound.
Hi...i just install latest remix os on hdd partition. All work fine and better than the default android x86 version but there is no sound either on hdmi or when using pc speaker.
My pc is amd x4 860k with r9 290x.
I had google the problem but its look like i never find any solution or step to solve this.
Is this a fixable problem or the remix os is actually dont support any sound just yet.
Plz help me
Bumping this thread...good os but no sound...
Ive tried editing menu.lst adding acpi=noirq and radeon.sound=1 but no luck. Trying alsamixer from playstore also failed.
Help me pls.
Im installing on my other machine i7 with r9 280x. The sound work yay..but the usb wlan adapter cannot connect...*sigh*
I installed an Android x86 TV from geektillithertz.com. I want to know what can I do with Gapps?
Same question here.
Thanks.
no Gapps
I also installed Nic's android TV x86 6.0.1 on my Intel machine that I built with only Intel HD graphics. The unit was working well with Remix OS and I had sound with external speakers, bluetooth/WIFI worked flawlessly. I decided to give the full Android TV image a try, but without Gapps this it is incomplete. The other issue is playback error with Android TV, which is now available >80 cities, I'm going to try to change to static IP and see if it fixes that issue and report back.
I know that this post is old, but if you continue need it you must install with ADB on wifi
Csesmau1 said:
I know that this post is old, but if you continue need it you must install with ADB on wifi
Click to expand...
Click to collapse
how?