Hello guys!
Im trying to port the VRTonix rom to my LG G3 - D855, I followed this guide, when I try to flash the final rom, I get this error:
Code:
system partition has unexpected contents after ota update
And the flash fails. and the f
I made some searches, and I'm wondering:
1) Which system.transfer.list should I use, the one from the base rom or the port's rom one?
Thank you
urmitnick said:
Hello guys!
Im trying to port the VRTonix rom to my LG G3 - D855, I followed this guide, when I try to flash the final rom, I get this error:
Code:
system partition has unexpected contents after ota update
And the flash fails. and the f
I made some searches, and I'm wondering:
1) Which system.transfer.list should I use, the one from the base rom or the port's rom one?
Thank you
Click to expand...
Click to collapse
Hi , i did the same , i am trying to port AOKP MM ROM for my Xiaomi Redmi 1s device. i am also facing the same error (recovery used TWRP 3.0.0) , if you able to resolve this error plz can you help me ?
manuhackzzz said:
Hi , i did the same , i am trying to port AOKP MM ROM for my Xiaomi Redmi 1s device. i am also facing the same error (recovery used TWRP 3.0.0) , if you able to resolve this error plz can you help me ?
Click to expand...
Click to collapse
Hello
Sorry but I didn't slove the issue, I'm still searching...
Related
Fix sim error in CM 12.1 lollipop for lenovo A6000 / plus
I have an idea how to fix sim errors on lenovo A6000/plus
Root your device (stock rom vibe ui)
install twrp recovery
Now go to backup section and backup fsg and modem
Now flash CM 12.1 lollipop and restore those file
:laugh: Done i hope this will wrk
TWRP recovery link :
Try and please do comment
tink2hakk said:
Fix sim error in CM 12.1 lollipop for lenovo A6000 / plus
I have an idea how to fix sim errors on lenovo A6000/plus
Root your device (stock rom vibe ui)
install twrp recovery
Now go to backup section and backup fsg and modem
Now flash CM 12.1 lollipop and restore those file
:laugh: Done i hope this will wrk
TWRP recovery link :
Try and please do comment
Click to expand...
Click to collapse
I have tried it but unfortunately not worked
TNq so much for trying !!
TNq so much for trying !! i'll try my level best to fix sim issue
Coming to LP, we have ART as the default runtime and each and every single file is oprimized to work with it.
I don't think MODEM files from stock are modified for running in ART module of LP.
We need to rework basically to make them work.
I had a hard time finding the solution and that's what I came up with after searching and all stuff. -_-
kaustubh.rockstar said:
Coming to LP, we have ART as the default runtime and each and every single file is oprimized to work with it.
I don't think MODEM files from stock are modified for running in ART module of LP.
We need to rework basically to make them work.
I had a hard time finding the solution and that's what I came up with after searching and all stuff. -_-
Click to expand...
Click to collapse
thats pretty amazing for your hard work and pretty annoying for making it work
question
tink2hakk said:
Fix sim error in CM 12.1 lollipop for lenovo A6000 / plus
I have an idea how to fix sim errors on lenovo A6000/plus
Root your device (stock rom vibe ui)
install twrp recovery
Now go to backup section and backup fsg and modem
Now flash CM 12.1 lollipop and restore those file
:laugh: Done i hope this will wrk
TWRP recovery link :
Try and please do comment
Click to expand...
Click to collapse
There is no option for backup fsg
There is only option for backup Efs
Sim Error
is this for TWRP recovery only? how about for Philtouch?! i lost my IMEI last month after flashing stock rom. unfortunately,i didnt found any solutions regarding Sim error. Do you have an idea how to fix Error?! im using vibeUI 2.0 as of now.
Same problem here, my device connot detect simcard
Try this to repair your imei it's on the back of your phone when you remove the battery. Note it down.
https://youtu.be/MdxFi33LzSA
Or
https://youtu.be/ePAOaAxGGc4
I cannot understand his language.. I need english.
found something helpful maybe
amodindo.tk/2015/08/rom-new-cm121-lenovo-a6000plus-all-fix.html?m=0
Can't post link edit it & check it out
Sir...yesterday I have flashed custom ROM CyanogenMod 12.1 ..working good in my lenovo a6000 plus..
I have found only one issue that my video recording is not working well..I can't record the video..any solutions??
Help me [email protected]
good moring ,
I ve samsung galaxy s3 neo i9300 android 4.4.4 , and when i try to flash any new custom rom of cm13 (marshmallow) i recieve an error message saying
"error executing updater binary in zip" , " error flashing zip "
however i could install a gapps file of version "open_gapps-arm-6.0-full-20160625" which i download from this website and it was installed successfully .
plzz help
thanks
Hey there,
That maybe the issue with your cm13's flashable zip file.
What is the version of cm13 that you have downloaded? (I mean the date of it, like this: cm-13.0-20160714-NIGHTLY-i9300.zip)
I got a gs3 too, and I flashed the cm13 nightly build that is released in 10/7, and it worked for me.
If you have any issue, reply this later!
Regards,
MrTumi689
Hey there ,
Thanks alot for your concern tumi
Ive used too many versions of cm 13 like 20160717 -NIGHTLY , 20160704 -NIGHTLY , 20160625 , 20160621 , all of those didnt work :/ , and i updated my OS b4 from 4.3 to
4.4.4 official .
I dont know what the cause of this prob .
Thanks
Actually, I don't think that the i9300 cm13 is compatible with your gs3 neo, which is i9300i
Don't think that you can install cm13 right now. What you can do:
-Maybe wait for cm14 to release as Android N is almost complete. Takes you some patience as it requires time.
-The latest CM for your phone that I found is CM12.1. Sorry.
Link to the CM12.1 for you: http://www.cyanogenmods.org/galaxy-s3-neo-cm12-1-lollipop-rom-gt-i9300i-i9301i-and-i9301q/
hey
Hey Tumi ,
Thanks alot for you effort , i think that gs3 neo is the same model as gs i9300GT because i see both model names on my phone .
Anyway ill try this rom , i think its very similar to cm 13 marshmallow .
Regards
Hey guys,I searched the forums for custom ROMs for my device but all were useless First I stumbled upon emotion lollipop(named Note4.zip or something) which I was able to flash with carliv touch recovery easily but my device did not boot.Then I tried myanogrn mod 12.1 and 13.1 both unable to install with any recovery I installed(carliv,philz,cwm) showing error of some 'status 7' and when I try to fix it with the assert deletion there is no assert lines in the ROM's update-script . Finally I decided to post the question here to find if any of you know the answer.My device is running on KitKat(4.4.2) stock ROM,rooted, baseband version:MOLY.WP8.W1315.MD.WG.MP.V43,2014/05/29 11.15.
Kernel version:3.4.67 and build is:ZAW1800G_060A_V8_2_5.
If anybody knows any ROM update please send me a message with the link to download the ROM file.Thank you.
Hey guys, I am thinking of flashing cm 13 rom based on android 6.0.1 on my moto e (1st Generation). my question is that all you guys who have upgraded to the cm13 rom on their moto e, how is your experience now?facing any problems or is it just great from the stock rom experience. Please help and share.
AbhinavIsgrt said:
Hey guys, I am thinking of flashing cm 13 rom based on android 6.0.1 on my moto e (1st Generation). my question is that all you guys who have upgraded to the cm13 rom on their moto e, how is your experience now?facing any problems or is it just great from the stock rom experience. Please help and share.
Click to expand...
Click to collapse
You will get performance close to deodexed KitKat stock rom .. No problems so far .. surely upgrade your device to cm13 :good:
definitely no problems.. just great.
latest nightly works flawlessly..
there is plethora of feature in marshmallow and in being cyanogenmod
I am also thinking in flashing CM13 rom based on android 6.0.1 on my Moto-E (1st Generation) XT1021...
I am currently using the following 5.1 ROM:
Retail US 5.1 ROM (Optimized) v1.0a (311mb)Non-Deodexed:
http://forum.xda-developers.com/devdb/project/dl/?id=14437
That I Found in the following post:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
So, I would like to know if I can safely flash directly the CM13 ROM, on top of my current v5.1 ?
And if anyone here could give me the correct link to download the CM13 ROM that works best on the Moto-E XT-1021 ?
Thanks in advance for helping me !
ulises.rodriguez said:
I am also thinking in flashing CM13 rom based on android 6.0.1 on my Moto-E (1st Generation) XT1021...
I am currently using the following 5.1 ROM:
Retail US 5.1 ROM (Optimized) v1.0a (311mb)Non-Deodexed:
http://forum.xda-developers.com/devdb/project/dl/?id=14437
That I Found in the following post:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
So, I would like to know if I can safely flash directly the CM13 ROM, on top of my current v5.1 ?
And if anyone here could give me the correct link to download the CM13 ROM that works best on the Moto-E XT-1021 ?
Thanks in advance for helping me !
Click to expand...
Click to collapse
Yes you can directly clean flash cm13 .. make sure you use gapps 6.0 .. and flash cm13 and gapps in a single session
https://download.cyanogenmod.org/?device=condor
Here is the link to official nightlies
​
ABSathe said:
Yes you can directly clean flash cm13 .. make sure you use gapps 6.0 .. and flash cm13 and gapps in a single session
https://download.cyanogenmod.org/?device=condor
Here is the link to official nightlies
Click to expand...
Click to collapse
ABSathe, 1000 Thanks for the quick reply, for letting me know that I can directly clean flash cm13 over 5.1 and for the link to official nightlies !
Please confirm if this is the correct method to flash the CM13 ROM:
1) Boot into latest TWRP and Format Data: Wipe > Format DATA > Yes
2) Transfer ROM to SDCARD or Internal Storage: CM13 ROM + gapps 6.0
3) TWRP > Wipe > Factory reset and flash CM13 ROM, and then Flash gapps 6.0 (flash cm13 and gapps in a single session)
4) Reboot.
However, since I have already installed in my Moto-T, the version 2.8.7 of TWRP ( http://forum.xda-developers.com/mot...recovery-twrp-2-8-6-0-touch-recovery-t3100879 ), I would like to know if is better and also you recommended me to install first ( using fastboot flash recovery) the cm-13.0-20160810-NIGHTLY-condor-recovery.img (instead of TWRP 2.8.7) ? :
CyanogenMod Recovery:
https://download.cyanogenmod.org/get/jenkins/173585/cm-13.0-20160810-NIGHTLY-condor-recovery.img
And then the:
CyanogenMod Build
cm-13.0-20160810-NIGHTLY-condor.zip (322.76 MB)
https://download.cyanogenmod.org/get/jenkins/173585/cm-13.0-20160810-NIGHTLY-condor.zip
And Finally - Flash gapps 6.0:
http://forum.xda-developers.com/android/general/gapps-gapps-6-0-1-minimal-t3276606
https://www.androidfilehost.com/?fid=24533103863139560
One last question, since I know that the CM13 is not based in an official Motorola release, I would like to know what is working flawlessly, and what is not working with in the Moto-E if I use this CM13 ROM ?
Please excuse all the questions, but I will like to be fully sure of the method and the correct files, that I have to use to successfully flash my Moto-E to CM13, to avoid future problems.
Thanks again for all your help !!
@ulises.rodriguez
I would recommend following steps
1)Download latest twrp (3.0.2) from twrp official website
2) Reboot into recovery and choose downloaded recovery image and then select recovery partition
(Twrp updated .. u can reboot for file transfer)
3)Transfer rom and gapps6.0 to sd card
4)Reboot into twrp and wipe /system,/data,/cache,/dalvikcache partitions (internal storage is optional )
5)choose rom zip (latest from cm downloads)
6)after rom zip is flashed successfully .. choose gapps zip (use open gapps Pico)
7)After successfully flashing both files .. reboot into system and enjoy new rom on moto e
Cm13 today's nightly working flawless for me
(And regarding your first sentence of post(1000 thanks ) .. I can't see them on my profile XD (Just joking .. hit thanks only if u want ))
Ignore any English grammatical mistakes in the post
ABSathe said:
@ulises.rodriguez
I would recommend following steps
1)Download latest twrp (3.0.2) from twrp official website
2) Reboot into recovery and choose downloaded recovery image and then select recovery partition
(Twrp updated .. u can reboot for file transfer)
3)Transfer rom and gapps6.0 to sd card
4)Reboot into twrp and wipe /system,/data,/cache,/dalvikcache partitions (internal storage is optional )
5)choose rom zip (latest from cm downloads)
6)after rom zip is flashed successfully .. choose gapps zip (use open gapps Pico)
7)After successfully flashing both files .. reboot into system and enjoy new rom on moto e
Cm13 today's nightly working flawless for me
(And regarding your first sentence of post(1000 thanks ) .. I can't see them on my profile XD (Just joking .. hit thanks only if u want ))
Ignore any English grammatical mistakes in the post
Click to expand...
Click to collapse
ABSathe, thanks again for your fast response and also valuable help !
Is this the open gapps6.0 Pico that you have installed in your Moto-E ? :
open_gapps-arm-6.0-pico-20160810.zip
http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
With regard to my question about how well it is currently working the CM13 in the Moto-E, and what is not working yet...
I was asking because I've heard that as the CM13 was not based on a official version of Motorola, some features of the Moto-E did not work very well...
So, I would like to know, if the proximity sensor, Phone Signal Bluetooth, Camera, Gyroscope and all other sensors, if all of them are working well, or if any have some limitations ?
Are there any features that you have found that work best with the CM13, than with the official ROMs from Motorola for the Moto-E ?
Thanks again for helping me and always answer all my requests !
ulises.rodriguez said:
ABSathe, thanks again for your fast response and also valuable help !
Is this the open gapps6.0 Pico that you have installed in your Moto-E ? :
open_gapps-arm-6.0-pico-20160810.zip
http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
With regard to my question about how well it is currently working the CM13 in the Moto-E, and what is not working yet...
I was asking because I've heard that as the CM13 was not based on a official version of Motorola, some features of the Moto-E did not work very well...
So, I would like to know, if the proximity sensor, Phone Signal Bluetooth, Camera, Gyroscope and all other sensors, if all of them are working well, or if any have some limitations ?
Are there any features that you have found that work best with the CM13, than with the official ROMs from Motorola for the Moto-E ?
Thanks again for helping me and always answer all my requests !
Click to expand...
Click to collapse
All the sensors are working perfectly
And regarding gapps .. I have installed older package (which I downloaded in July) .. but the latest one will just work fine
And latest nightly of cm13 is working perfectly for me.. so go for it
Sent from my Nexus 5X using XDA Labs
enyone have a costum rom for this model of lenovo?
i flashed a rom that it wasnot for that model and now i cant even go to recovery mode.
help me plz
CHESSMASTERKEL said:
enyone have a costum rom for this model of lenovo?
i flashed a rom that it wasnot for that model and now i cant even go to recovery mode.
help me plz
Click to expand...
Click to collapse
hello my friend, i had a similar problem like you with this viber c ( a2020a40) lenovo phone. i tried to flashboot a twrp img bad without usbdebugging mode enabled. so after that my phone goes to a black screen and no recovery mode at all. i spend long time to research and finally i found a solution for my problem. and i found and a working rom for this model to a russian site.
i cant paste links here cause i am a new member so search on google to find lenovo-support dot ru for image
A2020a40_DS_USR_S170_160331_ROW.7z
this is the image i used.
now i will try to explain how i did restore and now i have my phone back.
i used the same commands like before used for twrp but this time i used the bellow commands,
flashboot flash boot boot.img
flashboot flash recovery recover.img
xarisk said:
flashboot flash boot boot.img
flashboot flash recovery recover.img
Click to expand...
Click to collapse
I think you have some typo errors - the commands should be like:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
Okay . Maybe the rom u flashed was for a2010 .. as far as i can see.. that older version has like over 5 stable roms.. and we are stuck with nothing .. why .. oh please.. could anyone make a rom for our device?
CHESSMASTERKEL said:
enyone have a costum rom for this model of lenovo?
i flashed a rom that it wasnot for that model and now i cant even go to recovery mode.
help me plz
Click to expand...
Click to collapse
Custom rom:
https://forum.xda-developers.com/and...20a40-t3567812
Stock rom:
https://www.leakite.com/2016/12/leno...-firmware.html
SS means single sim and DS means dual sim obviously.
yes.. there are two roms that u can find in the internet.
there is a blissrom :
and an MIUI 8
just google it up. im not permitted to post outside links here. P
i recomend using the MIUI as it allows more ram optimization in a device as laggy as that
Samar Musthafa said:
yes.. there are two roms that u can find in the internet.
there is a blissrom :
and an MIUI 8
just google it up. im not permitted to post outside links here. P
i recomend using the MIUI as it allows more ram optimization in a device as laggy as that
Click to expand...
Click to collapse
more,
CM 12.1
CM 13
Blissrom
MIUI 8
Funtouch
Cms... U gotta be kidding me... Pm me...
daffaalam said:
more,
CM 12.1
CM 13
Blissrom
MIUI 8
Funtouch
Click to expand...
Click to collapse
I would love to try funtouch. the name seems cool. I currently use miui 8 v6.11 and it's amazing how my phone got transformed. I actually feel stock firmware is fake and full of bloat.
Getting a stupid black screen of death... Plz somebody help me fix this...
Please some one give me link of funtouch rom for lenovo vibe c a2020a40
killer118073836790 said:
Please some one give me link of funtouch rom for lenovo vibe c a2020a40
Click to expand...
Click to collapse
https://yadi.sk/d/Pu4x3JiI3GqUFf
Lenovo a2020a40
Dead Solution Please...!
Hey guys Good Day. I have a Lenovo a2020a40 device but the charging port is broken and the OS won't let me proceed to the main display it will stock on first logo then shut's off then it will go to the recovery mode. Can someone help me? Or someone knows how to solve it? I was looking for a stock rom that allows me to flash in the stock recovery but yeah no luck at all .